Help with multiple files
How do I activate "process multiple files" ? in the PS Ele 11 editor?
File>Process Multiple Files in Expert mode. (Click the word Expert at the top of your screen if it isn't already active.)
Similar Messages
-
Working with Multiple Files in Workspace Layout
If I was working with multiple files in the workspace layout, they each used to be available for selection from a tab. Now I can either cascade the files horizontally or vertically - but not have them appear in a tab across the top of the workspace layout.
Does anyone know how to set the workspace to present multiple files in tabs? I have CS3.Tanya,
This may not help, but the times when that happens to me is when I go too fast and some operations haven't finished. I then try to select a file that hasn't completed and the file I select is in the process of having the data updated. The worst is when it is trying to render as I am doing something.
I hope this helps some.
Mel -
Generate Proxy from WSDL with multiple Files
I need to load a WSDL (to generate a web service consumer proxy). However, that WSDL is build from multiple files, both .wsdl and .xsd, not a single one. It seems the SAP wizard to generate the proxy does expect one single WSDL file however.
Is there a way in SAP to load a WSDL with multiple files, or do I need to (manually) flatten all these files into one single file?I am not sure why it fails in WebSphere. Please try posting
this question to a WebSphere newsgroup.
Regards,
-manoj
http://manojc.com
"viswanath" <[email protected]> wrote in message
news:40aee7fa$1@mktnews1...
>
thanks manoj for your reply.
I'm using IBM WebSphere SDK for Web Services v5.1
for generation of java client.
I'm able to generate the client but the problem is
the WSDl2Java command ignored the SOAPHeaders while
generating the proxy. Since I'm using SOAP headers for
authentication the code fails.
Thanks,
Viswanath
"manoj cheenath" <[email protected]> wrote:
I am not sure which tool you are using
to generate web service clent. To generate
a WLS web service client you have to use clientgen.
Details here:
http://e-docs.bea.com/wls/docs81/webserv/anttasks.html
Regards,
-manoj
http://manojc.com
"viswanath" <[email protected]> wrote in message
news:40ad8a07$[email protected]..
HI,
I have a web service (implemented in .NET) which extends soap headersfor
doing
Authentication. WSDL is generated out of this web service. But wheni use
wsdl2java
(J2EE) to generate a proxy class, there is no interface generated forsoap
headers.
Without extending SOAP headers the web service works fine.
Basically, I'm looking for a way to generate java interfaces (ie.
proxies)
for
SOAP headers out of the WSDL file.
PFA the WSDL file and the proxy
Any help on this is appreciated. -
Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge
can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found
That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum] -
Help with add file name problem with Photoshop CS4
Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb -
Problem Creating PDF with Multiple Files in Pro. 7
I'm using Adobe Acrobat Professional 7 on a computer with Windows XP.
The problem is that when I try to create a PDF with multiple files everything just suddenly stops. There are 75 files involved and when it gets to around 41 or so (don't know the exact number because I turned away from my computer for just a moment), it just stops. There are no error messages; nothing. Just a blank Acrobat screen.
Last week I had a different problem which was resolved by an uninstall/reinstall and I was able to create the PDF with those exact same 75 files, but after the PDF was created I realised that some changes needed to be made. I dumped the PDF, made the appropriate changes and left it for the weekend. Today I the new problem has arisen.
Any ideas what the problem might be?I've read many discussions about Acrobat and problems with server files, with the general solution being what you are doing... copy the files to a local hard drive
-
Create folder with multiple files (was: folders)
Can you create a folder with multiple files and direct the page to go to the folder and then the reader can select the file they wish to choose? Example Council Mintes Folder with a file for each set of minutes. The hyperlink would open the folder and then the reader would select whch set of minutes they'd like to see.
You may not have access to it depending on your hosting company and plan, but if you did have the ability to change it you'd normally do it in the admin area of your hosting account which would update the proper files on your server.
You may also be able to do it manually, but the "how to" depends on the server type you are running.
EDIT: I'd still suggest using a server script (like the PHP I linked to) because the look of a directory with browsing turned on is pretty ugly and can't be changes since it's not a page on your site. With the PHP I linked to, you could have an actual page for your links, complete with your site's design, that simply lists the files from the specified directory. It's very simple to set up if you have PHP on your server. -
How to send the mail with multiple file attachments ?
Sending mails with multiple files as attachments.
You need to start from the app, assuming that it has an email function, that contains the files that you want to send as attachments. The Photos app allows you to send up to 5 photos on the same email, but if you want to send multiple file types then you need an app that supports all those file types. I use the GoodReader app which supports quite a few document/file types (e.g. PDF, Excel, Word, pictures), and from that I can select multiple files (including different types) and attach them to the same email.
-
"Place into Photoshop" with multiple files
I'd love to see this feature in Bridge
Import multiple files into an existing photoshop file (with a predetermined size ) as smart object layers in photoshop.
The options that Bridge currently offers falls short in 2 area
Load Files into Photoshop Layers-- does not import smart objects and creates a new photoshop file that ends up being as large as the largest imported file
Place into Photoshop--only lets you do one at a time
I need "Place into Photoshop" with multiple files
Is there a way to do this?
Thanks!!I agree, placing multiple files into your PSD as smart objects all at once like InDesign would be a great (and logical) feature for Photoshop to have. The only "workaround" I have is to create a shortcut using Ctrt+Alt+Shift+D (which is not used by anything), so you can place pictures/graphics more quickly, rather than using the menu each time.
-
Help with multiple httpservice calls
I need help with multiple httpservice call back to back, doing 10 different mysql query at startup of the app loading results into 14 datagrids/combobox all queries are to different tables.
Hello,
I think what Grizzzzzzzzzz means is the following:
<mx:HTTPService id="serviceOne"
url="here goes url"
result="resultHandler1(event);"
fault="faultHandler(event);"/>
<mx:HTTPService id="serviceTwo"
url="here goes url"
result="resultHandler2(event);"
fault="faultHandler(event);"/>
<mx:HTTPService id="serviceThree"
url="here goes url"
result="resultHandler3(event);"
fault="faultHandler(event);"/>
// Result handler 1
private function resultHandler1(event:ResultEvent):void{
//Here do something with the results
xmlCollection = event.result as XML;
//then call the next service
serviceTwo.send();
// Result handler 2
private function resultHandler2(event:ResultEvent):void{
//Here do something with the results
xmlCollection = event.result as XML;
//then call the next service
serviceThree.send();
I hope this helps,
Pierre -
Pull a zip file with multiple files unzip it, and finally load one of the f
Hi Aill,
I have following query.
Could we do the following with XI: pull a zip file with multiple files from a vendor which resides outside of XI server network, unzip it, and finally load one of the files to SAP?
Regards
Rohan SHi Varadharajan,
I have 10 text files in some ZIP file on one server which is out side of network. We can reach that file through Proxy only to read ZIP file.
I need to extract the file and on the bases of some condition one of the file i need to upload data to SAP.
Is it possible. If possible then How?
Regards -
I don't know why, but when I select a folder with multiple docs contained within it, or multiple files, the Compress option is grayed out under the File menu, nor is it available when I right-click. Please help.
Yes it is, but I have the same problem of the option does not appear with "right click" (I'm actually control-clicking), and COMPRESS is grayed out under the file menu. I'd like to fix it.
Hmm. After finding the Archive Utility,* I tried archiving the folder. It came out as .cpgz, ugh. Found there was a preference to make .zip the default. It worked!
And now…the menus are not grayed out. ?!?! OK.'
Hope this helps someone.
*You cannot find this via search, apparently it is a hidden file, you have to click from the root drive through to /System/Library/CoreServices (Thanks for the file path Alberto!) -
Find and replace with multiple files and with a watch folder
I am trying to create a watch folder that uses red_menace script to:
1. Have a folder that receives multiple xml files that run the script one by one.
2. then move the files to an output folder.
I tried modifying the set TheFIle to choose file -- the original text file to:
with multiple selections allowed
But that doesn't seem to work. I know i'm missing a step. Any help is much appreciated!
Thanks!
The way i'd like to setup things is having an input folder on the desktop (or just have the application on the desktop and I can drag the files onto it), and let it do it's thing. Once it's done have it export the xml files into an output folder.
Here's what i got so far:
on open
set TheFIle to choose file -- the original text file
set TheFolder to ("Macintosh HD:Users:user1:Desktop:out") -- the folder for the output file
set TheName to (GetUniqueName for TheFIle from TheFolder) -- the name for the output file
set TheText to read TheFIle -- get the text to edit
set Originals to {"KPCALDATE", "KPCALEVENT", "KPCALDAY", "KPCALBODY", "obituaries name", "" & return & "</cstyle></pstyle>" & return & "<pstyle name=\"obituaries text\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\" font=\"ADV AGBook-Medium 2\">", "<pstyle name=\"Recipe Ingredients\"><cstyle>", " .com", " .net", " .org", " .edu", "www .", "www. ", "Ho- nolulu", "<pstyle name=\"kicker 12\"><cstyle allcaps=\"1\">fashion news</cstyle><cstyle allcaps=\"1\">" & return & "</cstyle></pstyle>" & return & "", "<component name=\"Headline 1\" type=\"Headline\">" & return & "<header>" & return & "<field name=\"Component name\" type=\"string\" value=\"Headline 1\"/>" & return & "<field name=\"Component type\" type=\"popup\" value=\"Headline\"/>" & return & "</header>" & return & "<body>" & return & "<pstyle name=\"hed STANDARD 36\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle allcaps=\"1\">", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\">", "<pstyle name=\"tagline\"><cstyle>-", "-", "
Per serving:", "<pstyle name=\"Titlebar - mini, red\"><cstyle allcaps=\"1\">NATION & World </cstyle><cstyle allcaps=\"1\">Report</cstyle><cstyle allcaps=\"1\">" & return & "</cstyle></pstyle>" & return & "", "</cstyle></pstyle>"} -- the terms that can be replaced
set Replacements to {"subhed", "subhed", "subhed", "Normal", "obituaries text", ", ", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\" font=\"ADV AGBook-Medium 2\">", "<pstyle name=\"Recipe Ingredients\"><cstyle>
", ".com", ".net", ".org", ".edu", "www.", "www.", "Honolulu", "", "<component name=\"Headline1\" type=\"Headline\">" & return & "<header>" & return & "<field name=\"Component name\" type=\"string\" value=\"Headline1\"/>" & return & "<field name=\"Component type\" type=\"popup\" value=\"Headline\"/>" & return & "</header>" & return & "<body>" & return & "<pstyle name=\"hed STANDARD 27\"><cstyle>", "<pstyle name=\"obituaries text\"><cstyle allcaps=\"1\">", "<pstyle name=\"obituaries text\"><cstyle name=\"Graphics Bold leadin\">", "<pstyle name=\"tagline\"><cstyle>", " ", "
Per serving:", "","" & return & "</cstyle></pstyle>"} -- the replacement terms
repeat with AnItem from 1 to count Originals
set TheText to (replaceText of TheText from (item AnItem of Originals) to (item AnItem of Replacements))
end repeat
try -- write a new output file
tell application "Finder" to make new file at TheFolder with properties {name:TheName}
set OpenFile to open for access (result as alias) with write permission
write TheText to OpenFile starting at eof
close access OpenFile
on error errmess
try
log errmess
close access OpenFile
end try
end try
end open
to GetUniqueName for SomeFile from SomeFolder
check if SomeFile exists in SomeFolder, creating a new unique name if needed
parameters - SomeFile [mixed]: a source file path
SomeFolder [mixed]: a folder to check
returns [text]: a unique file name and extension
set {Counter, Divider} to {"00", "_"}
-- get the name and extension
set {name:TheName, name extension:TheExtension} to info for file (SomeFile as text)
if TheExtension is missing value then set TheExtension to ""
set TheName to text 1 thru -((count TheExtension) + 2) of TheName
set NewName to TheName & "." & TheExtension
tell application "System Events" to tell (get name of files of folder (SomeFolder as text))
repeat while it contains NewName
set Counter to text 2 thru -1 of ((100 + Counter + 1) as text) -- leading zero
set NewName to TheName & Divider & Counter & "." & TheExtension
end repeat
end tell
return NewName
end GetUniqueName
to EditItems of SomeItems given Title:TheTitle, Prompt:ThePrompt
displays a dialog for multiple item edit (note that a return is used between each edit item)
for each of the items in SomeItems, a line containing it's text is placed in the edit box
the number of items returned are padded or truncated to match the number of items in SomeItems
parameters - SomeItems [list]: a list of text items to edit
TheTitle [boolean/text]: use a default or the given dialog title
ThePrompt [boolean/text]: use a default or the given prompt text
returns [list]: a list of the edited items, or {} if error
set {TheItems, TheInput, TheCount} to {{}, {}, (count SomeItems)}
if TheCount is less than 1 then return {} -- error
if ThePrompt is in {true, false} then -- "with" or "without" Prompt
if ThePrompt then
set ThePrompt to "Edit the following items:" & return -- default
else
set ThePrompt to ""
end if
else -- fix up the given prompt a little
set ThePrompt to ThePrompt & return
end if
if TheTitle is in {true, false} then if TheTitle then -- "with" or "without" Title
set TheTitle to "Multiple Edit Dialog" -- default
else
set TheTitle to ""
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SomeItems, AppleScript's text item delimiters} to {SomeItems as text, TempTID}
set TheInput to paragraphs of text returned of (display dialog ThePrompt with title TheTitle default answer SomeItems)
repeat with AnItem from 1 to TheCount -- pad/truncate entered items
try
set the end of TheItems to (item AnItem of TheInput)
on error
set the end of TheItems to ""
end try
end repeat
return TheItems
end EditItems
to replaceText of SomeText from OldItem to NewItem
replace all occurances of OldItem with NewItem
parameters - SomeText [text]: the text containing the item(s) to change
OldItem [text]: the item to be replaced
NewItem [text]: the item to replace with
returns [text]: the text with the item(s) replaced
set SomeText to SomeText as Unicode text -- TID's are case insensitive with Unicode text
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, OldItem}
set {ItemList, AppleScript's text item delimiters} to {text items of SomeText, NewItem}
set {SomeText, AppleScript's text item delimiters} to {ItemList as text, TempTID}
return SomeText
end replaceText
Message was edited by: gamebreakersWhen you use the open or adding folder items to handlers, you need to add the parameters for the file items passed to them.
I'll go ahead and post the applet/droplet version of my original script from the previous topic for reference:
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px; height: 340px;
color: #000000;
background-color: #FFEE80;
overflow: auto;"
title="this text can be pasted into the Script Editor">
-- search and replace multiple items applet/droplet/folder action
-- the terms to replace - edit as needed
property EditableItems : {¬
"one", ¬
"two", ¬
"three", ¬
"four", ¬
"five", ¬
"six", ¬
"seven", ¬
"eight", ¬
"nine", ¬
"ten", ¬
"eleven", ¬
"twelve", ¬
"thirteen", ¬
"fourteen", ¬
"fifteen", ¬
"sixteen", ¬
"seventeen", ¬
"eighteen", ¬
"nineteen", ¬
"twenty"}
-- the folder for the output file(s) - change as needed
property TheFolder : (path to desktop)
property LastEditItems : EditableItems
on run
the applet/droplet was double-clicked
open (choose file with multiple selections allowed)
end run
on open TheItems
items were dropped onto the applet/droplet
parameters - TheItems [list]: a list of the items (aliases) dropped
returns nothing
repeat with AnItem in TheItems
ReplaceMultipleItems from AnItem
end repeat
end open
on adding folder items to this_folder after receiving these_items
folder action - items were added to a folder
parameters - this_folder [alias]: the folder added to
these_items [list]: a list if items (aliases) added
returns nothing
repeat with AnItem in these_items
ReplaceMultipleItems from AnItem
end repeat
end adding folder items to
to ReplaceMultipleItems from SomeFile
replace multiple text items in SomeFile
parameters - SomeFile [alias]: the file to replace items in
returns nothing
set TheName to (GetUniqueName for SomeFile from TheFolder) -- the name for the output file
set TheText to read SomeFile -- get the text to edit
set Originals to (choose from list EditableItems default items LastEditItems with prompt "Select the terms to replace:" with multiple selections allowed) -- the specific terms to replace
set LastEditItems to Originals
set Replacements to (EditItems of Originals with Title given Prompt:"Edit the following replacement terms:") -- the replacement terms
repeat with AnItem from 1 to count Originals
set TheText to (ReplaceText of TheText from (item AnItem of Originals) to (item AnItem of Replacements))
end repeat
try -- write a new output file
tell application "Finder" to make new file at TheFolder with properties {name:TheName}
set OpenFile to open for access (result as alias) with write permission
write TheText to OpenFile starting at eof
close access OpenFile
on error errmess
try
log errmess
close access OpenFile
end try
end try
end ReplaceMultipleItems
to GetUniqueName for SomeFile from SomeFolder
check if SomeFile exists in SomeFolder, creating a new unique name if needed
parameters - SomeFile [mixed]: a source file path
SomeFolder [mixed]: a folder to check
returns [text]: a unique file name and extension
set {Counter, Divider} to {"00", "_"}
-- get the name and extension
set {name:TheName, name extension:TheExtension} to info for file (SomeFile as text)
if TheExtension is in {missing value, ""} then
set TheExtension to ""
else
set TheExtension to "." & TheExtension
end if
set {NewName, TheExtension} to {TheName, (ChangeCase of TheExtension to "upper")}
set TheName to text 1 thru -((count TheExtension) + 1) of TheName
tell application "System Events" to tell (get name of files of folder (SomeFolder as text))
repeat while it contains NewName
set Counter to text 2 thru -1 of ((100 + Counter + 1) as text) -- leading zero
set NewName to TheName & Divider & Counter & TheExtension
end repeat
end tell
return NewName
end GetUniqueName
to EditItems of SomeItems given Title:TheTitle, Prompt:ThePrompt
displays a dialog for multiple item edit (note that a return is used between each edit item)
for each of the items in SomeItems, a line containing it's text is placed in the edit box
the number of items returned are padded or truncated to match the number of items in SomeItems
parameters - SomeItems [list]: a list of text items to edit
TheTitle [boolean/text]: use a default or the given dialog title
ThePrompt [boolean/text]: use a default or the given prompt text
returns [list]: a list of the edited items, or {} if error
set {TheItems, TheInput, TheCount} to {{}, {}, (count SomeItems)}
if TheCount is less than 1 then return {} -- error
if ThePrompt is in {true, false} then -- "with" or "without" Prompt
if ThePrompt then
set ThePrompt to "Edit the following items:" & return -- default
else
set ThePrompt to ""
end if
else -- fix up the given prompt a little
set ThePrompt to ThePrompt & return
end if
if TheTitle is in {true, false} then if TheTitle then -- "with" or "without" Title
set TheTitle to "Multiple Edit Dialog" -- default
else
set TheTitle to ""
end if
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, return}
set {SomeItems, AppleScript's text item delimiters} to {SomeItems as text, TempTID}
set TheInput to paragraphs of text returned of (display dialog ThePrompt with title TheTitle default answer SomeItems)
repeat with AnItem from 1 to TheCount -- pad/truncate entered items
try
set the end of TheItems to (item AnItem of TheInput)
on error
set the end of TheItems to ""
end try
end repeat
return TheItems
end EditItems
to ReplaceText of SomeText from OldItem to NewItem
replace all occurances of OldItem with NewItem
parameters - SomeText [text]: the text containing the item(s) to change
OldItem [text]: the item to be replaced
NewItem [text]: the item to replace with
returns [text]: the text with the item(s) replaced
set SomeText to SomeText as text
if SomeText contains OldItem then
set {TempTID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, OldItem}
try
set {ItemList, AppleScript's text item delimiters} to {text items of SomeText, NewItem}
set {SomeText, AppleScript's text item delimiters} to {ItemList as text, TempTID}
on error ErrorMessage number ErrorNumber -- oops
set AppleScript's text item delimiters to TempTID
error ErrorMessage number ErrorNumber
end try
end if
return SomeText
end ReplaceText
to ChangeCase of SomeText to CaseType
changes the case or capitalization of SomeText to the specified CaseType using Python
parameters - SomeText [text]: the text to change
CaseType [text]: the type of case desired:
"upper" = all uppercase text
"lower" = all lowercase text
"title" = uppercase character at start of each word, otherwise lowercase
"capitalize" = capitalize the first character of the text, otherwise lowercase
returns [text]: the changed text
set SomeText to SomeText as text
if CaseType is not in {"upper", "lower", "title", "capitalize"} then return SomeText
return (do shell script "/usr/bin/python -c \"import sys; print unicode(sys.argv[1], 'utf8')." & CaseType & "().encode('utf8')\" " & quoted form of SomeText)
end ChangeCase
</pre>
Edit: how does the choose from list dialog handle those big strings? I'm guessing not very well - is that why you avoided using them?
Message was edited by: red_menace -
Help with Upload file to Server Examples
I have been working with the examples for how to upload a file to the server. Though i got the example to work. there is one more thing i need to do. i need to allow the user to be able to select multiple files. In the example when you click on Upload, it opens a MS window to allow you to select a file. This example does not allow you to select more then one file though. I found another example for selecting multiple files but this one differs very much in that the person who make it "Ryan Favro" created a whole new GUI window to select multiple files. those his example works great, i dont want a special window to select files, i want the MS window to do it.
Is there a way to make the original example that uses the MS window to allow the user to select multiple files ?
I have attached the example that uses the MS window.Hi,
Use this code. May be it helps u.
fileuploadapp.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:com="test.*" layout="absolute"
creationComplete="initApp()" viewSourceURL="srcview/index.html">
<mx:Script>
<![CDATA[
import mx.controls.Alert;
private const _strDomain:String = new String("http://localhost:8400/");
private const _strUploadScript:String = new String(_strDomain + "ProcessFileUp/UploadFile");
// Initalize
private function initApp():void {
Security.allowDomain(_strDomain);
]]>
</mx:Script>
<mx:Canvas width="400" height="300" horizontalCenter="0" verticalCenter="0">
<com:FileUpload
width="100%" height="100%"
uploadUrl="{_strUploadScript}"
uploadComplete="Alert.show('File(s) have been uploaded.', 'Upload successful')"
uploadIOError="Alert.show('IO Error in uploading file.', 'Error')"
uploadSecurityError="Alert.show('Security Error in uploading file.', 'Error')"/>
</mx:Canvas>
</mx:Application>
fileuoload.mxml
<?xml version="1.0" encoding="utf-8"?>
<mx:Panel xmlns:mx="http://www.adobe.com/2006/mxml" xmlns:com="*"
layout="vertical" width="100%" minWidth="400" height="100%" minHeight="200"
title="Upload Files" creationComplete="initCom()">
<mx:Metadata>
[Event(name="uploadComplete", type="flash.events.Event")]
[Event(name="uploadProgress", type="flash.events.ProgressEvent")]
[Event(name="uploadCancel", type="flash.events.Event")]
[Event(name="uploadIOError", type="flash.events.IOErrorEvent")]
[Event(name="uploadSecurityError", type="flash.events.SecurityErrorEvent")]
</mx:Metadata>
<mx:Script>
<![CDATA[
import mx.controls.*;
import mx.managers.*;
import mx.events.*;
import flash.events.*;
import flash.net.*;
private var _strUploadUrl:String;
private var _refAddFiles:FileReferenceList;
private var _refUploadFile:FileReference;
private var _arrUploadFiles:Array;
private var _numCurrentUpload:Number = 0;
// Set uploadUrl
public function set uploadUrl(strUploadUrl:String):void {
_strUploadUrl = strUploadUrl;
// Initalize
private function initCom():void {
_arrUploadFiles = new Array();
enableUI();
uploadCheck();
// Called to add file(s) for upload
private function addFiles():void {
_refAddFiles = new FileReferenceList();
_refAddFiles.addEventListener(Event.SELECT, onSelectFile);
_refAddFiles.browse();
// Called when a file is selected
private function onSelectFile(event:Event):void {
var arrFoundList:Array = new Array();
// Get list of files from fileList, make list of files already on upload list
for (var i:Number = 0; i < _arrUploadFiles.length; i++) {
for (var j:Number = 0; j < _refAddFiles.fileList.length; j++) {
if (_arrUploadFiles[i].name == _refAddFiles.fileList[j].name) {
arrFoundList.push(_refAddFiles.fileList[j].name);
_refAddFiles.fileList.splice(j, 1);
j--;
if (_refAddFiles.fileList.length >= 1) {
for (var k:Number = 0; k < _refAddFiles.fileList.length; k++) {
_arrUploadFiles.push({
name:_refAddFiles.fileList[k].name,
size:formatFileSize(_refAddFiles.fileList[k].size),
file:_refAddFiles.fileList[k]});
listFiles.dataProvider = _arrUploadFiles;
listFiles.selectedIndex = _arrUploadFiles.length - 1;
if (arrFoundList.length >= 1) {
Alert.show("The file(s): \n\n• " + arrFoundList.join("\n• ") + "\n\n...are already on the upload list. Please change the filename(s) or pick a different file.", "File(s) already on list");
updateProgBar();
scrollFiles();
uploadCheck();
// Called to format number to file size
private function formatFileSize(numSize:Number):String {
var strReturn:String;
numSize = Number(numSize / 1000);
strReturn = String(numSize.toFixed(1) + " KB");
if (numSize > 1000) {
numSize = numSize / 1000;
strReturn = String(numSize.toFixed(1) + " MB");
if (numSize > 1000) {
numSize = numSize / 1000;
strReturn = String(numSize.toFixed(1) + " GB");
return strReturn;
// Called to remove selected file(s) for upload
private function removeFiles():void {
var arrSelected:Array = listFiles.selectedIndices;
if (arrSelected.length >= 1) {
for (var i:Number = 0; i < arrSelected.length; i++) {
_arrUploadFiles[Number(arrSelected[i])] = null;
for (var j:Number = 0; j < _arrUploadFiles.length; j++) {
if (_arrUploadFiles[j] == null) {
_arrUploadFiles.splice(j, 1);
j--;
listFiles.dataProvider = _arrUploadFiles;
listFiles.selectedIndex = 0;
updateProgBar();
scrollFiles();
uploadCheck();
// Called to check if there is at least one file to upload
private function uploadCheck():void {
if (_arrUploadFiles.length == 0) {
btnUpload.enabled = false;
listFiles.verticalScrollPolicy = "off";
} else {
btnUpload.enabled = true;
listFiles.verticalScrollPolicy = "on";
// Disable UI control
private function disableUI():void {
btnAdd.enabled = false;
btnRemove.enabled = false;
btnUpload.enabled = false;
btnCancel.enabled = true;
listFiles.enabled = false;
listFiles.verticalScrollPolicy = "off";
// Enable UI control
private function enableUI():void {
btnAdd.enabled = true;
btnRemove.enabled = true;
btnUpload.enabled = true;
btnCancel.enabled = false;
listFiles.enabled = true;
listFiles.verticalScrollPolicy = "on";
// Scroll listFiles to selected row
private function scrollFiles():void {
listFiles.verticalScrollPosition = listFiles.selectedIndex;
listFiles.validateNow();
// Called to upload file based on current upload number
private function startUpload():void {
if (_arrUploadFiles.length > 0) {
disableUI();
listFiles.selectedIndex = _numCurrentUpload;
scrollFiles();
// Variables to send along with upload
var sendVars:URLVariables = new URLVariables();
sendVars.action = "upload";
var request:URLRequest = new URLRequest();
request.data = sendVars;
request.url = _strUploadUrl;
request.method = URLRequestMethod.POST;
_refUploadFile = new FileReference();
_refUploadFile = listFiles.selectedItem.file;
_refUploadFile.addEventListener(ProgressEvent.PROGRESS, onUploadProgress);
_refUploadFile.addEventListener(Event.COMPLETE, onUploadComplete);
_refUploadFile.addEventListener(IOErrorEvent.IO_ERROR, onUploadIoError);
_refUploadFile.addEventListener(SecurityErrorEvent.SECURITY_ERROR, onUploadSecurityError);
_refUploadFile.upload(request, "file", false);
// Cancel and clear eventlisteners on last upload
private function clearUpload():void {
_refUploadFile.removeEventListener(ProgressEvent.PROGRESS, onUploadProgress);
_refUploadFile.removeEventListener(Event.COMPLETE, onUploadComplete);
_refUploadFile.removeEventListener(IOErrorEvent.IO_ERROR, onUploadIoError);
_refUploadFile.removeEventListener(SecurityErrorEvent.SECURITY_ERROR, onUploadSecurityError);
_refUploadFile.cancel();
_numCurrentUpload = 0;
updateProgBar();
enableUI();
// Called on upload cancel
private function onUploadCanceled():void {
clearUpload();
dispatchEvent(new Event("uploadCancel"));
// Get upload progress
private function onUploadProgress(event:ProgressEvent):void {
var numPerc:Number = Math.round((event.bytesLoaded / event.bytesTotal) * 100);
updateProgBar(numPerc);
var evt:ProgressEvent = new ProgressEvent("uploadProgress", false, false, event.bytesLoaded, event.bytesTotal);
dispatchEvent(evt);
// Update progBar
private function updateProgBar(numPerc:Number = 0):void {
var strLabel:String = (_numCurrentUpload + 1) + "/" + _arrUploadFiles.length;
strLabel = (_numCurrentUpload + 1 <= _arrUploadFiles.length && numPerc > 0 && numPerc < 100) ? numPerc + "% - " + strLabel : strLabel;
strLabel = (_numCurrentUpload + 1 == _arrUploadFiles.length && numPerc == 100) ? "Upload Complete - " + strLabel : strLabel;
strLabel = (_arrUploadFiles.length == 0) ? "" : strLabel;
progBar.label = strLabel;
progBar.setProgress(numPerc, 100);
progBar.validateNow();
// Called on upload complete
private function onUploadComplete(event:Event):void {
_numCurrentUpload++;
if (_numCurrentUpload < _arrUploadFiles.length) {
startUpload();
} else {
enableUI();
clearUpload();
dispatchEvent(new Event("uploadComplete"));
// Called on upload io error
private function onUploadIoError(event:IOErrorEvent):void {
clearUpload();
var evt:IOErrorEvent = new IOErrorEvent("uploadIoError", false, false, event.text);
dispatchEvent(evt);
// Called on upload security error
private function onUploadSecurityError(event:SecurityErrorEvent):void {
clearUpload();
var evt:SecurityErrorEvent = new SecurityErrorEvent("uploadSecurityError", false, false, event.text);
dispatchEvent(evt);
// Change view state
private function changeView():void {
currentState = (currentState == "mini") ? "" : "mini";
]]>
</mx:Script>
<mx:states>
<mx:State name="mini">
<mx:SetProperty name="height" value="60"/>
<mx:SetProperty name="minHeight" value="60"/>
<mx:SetStyle target="{btnView}" name="icon" value="@Embed('assets/application_put.png')"/>
</mx:State>
</mx:states>
<mx:transitions>
<mx:Transition fromState="*" toState="*">
<mx:Resize target="{this}" duration="1000"/>
</mx:Transition>
</mx:transitions>
<mx:Canvas width="100%" height="100%">
<mx:DataGrid id="listFiles" left="0" top="0" bottom="0" right="0"
allowMultipleSelection="true" verticalScrollPolicy="on"
draggableColumns="false" resizableColumns="false" sortableColumns="false">
<mx:columns>
<mx:DataGridColumn headerText="File" dataField="name" wordWrap="true"/>
<mx:DataGridColumn headerText="Size" dataField="size" width="75" textAlign="right"/>
</mx:columns>
</mx:DataGrid>
</mx:Canvas>
<mx:ControlBar horizontalAlign="center" verticalAlign="middle">
<mx:Button id="btnAdd" toolTip="Add file(s)" click="addFiles()" icon="@Embed('assets/add.png')" width="26"/>
<mx:Button id="btnRemove" toolTip="Remove file(s)" click="removeFiles()" icon="@Embed('assets/delete.png')" width="26"/>
<mx:ProgressBar id="progBar" mode="manual" label="" labelPlacement="center" width="100%"/>
<mx:Button id="btnCancel" toolTip="Cancel upload" icon="@Embed('assets/cancel2.png')" width="26" click="onUploadCanceled()"/>
<mx:Button label="Upload" toolTip="Upload file(s)" id="btnUpload" click="startUpload()" icon="@Embed('assets/bullet_go.png')"/>
<mx:Button id="btnView" toolTip="Show/Hide file(s)" icon="@Embed('assets/application_get.png')" width="26" click="changeView()"/>
</mx:ControlBar>
</mx:Panel>
Regards,
Shivang -
BPEL Process with multiple file types using one FTP adapter is not working
i created a bpel process which will fetch the files from remote location using FTP adapter.
Now the process works for only one format or file type like *.xls.
How can i use more than one file format in one FTP adapter.
OR
is there any other way to do it.
file type assignation is 5th step in FTP adapter configuration.
i have tried *.xls,*.csv and *.xls;*.csv and *.xls:*.csv by seperating with comman, colon, space... still not working.
i read the documentation *.* will not work.. for one file format it's working fine.
looking forward for reply as soon as possible.Are you positive that it is not working? I'm not sure how you can use one FTP adapter for multiple file types unless the underlying data is exactly the same format or you are processing it as opaque data. Sometimes when a FTP adapter chokes on a file with a bad structure it doesn't create a BPEL instance, it simply moves the bad file to a separate folder.
So I assume you are using opaque as the data type instead of using an XSD element?
That said, I don't think you can put two separate file types in the filter. Is it possible for you to do something like: CommonFileName*.* or do you have similar files with other extensions?
I know the above probably isn't of much help, but I had so many problems with the FTP adapter and its lack of features that I am writing my own. Unfortunately that is a large undertaking and there isn't any good documentation of JCA resource adapter / BPEL PM integration.
Maybe you are looking for
-
Can't Open DVD-R Created by Standalone Sony GX315
Sorry for the length but I wanted to be complete. I am running a PB G4 1.33 17" with 10.4.3, QT 7.0.4 and the MPEG2. I recently purchased a Sony Standalone DVD Recorder GX315 to replace a Lite On 5005 that died. I record old home made videos (no encr
-
Cost of sales goods accounting
Dear all, We have different type of the sales order. At opm level we have accounting entries against sales order like this cost of goods "dr" and finish product stock "cr". Now I have created one more order type and want dr account (expense ) that i
-
How to set sap directories for FTP via TCode:AL11?
Hi, all I want transfer data from a FTP server to BW. With TCode AL11 I setup SAP directory for FTP, format as following: Z_MYDIR ftp://user:[email protected] ftp://10.5.1.21 is the main directory in my FTP server. but when I double click the
-
Hi All, My program is generating a session . Now i need to process this session in background without going to the SM35 Is there any other alternative to do so using the FMs or by settings any options in the SUMBIT statement . Thank you, Regards. Pad
-
Hello, I just need to confirm my understandings of the available variables https://www.paypal.com/IntegrationCenter/ic_ipn-pdt-variable-reference.html Ok were I to pass any values to paypal using any of the variables listed and the entire transaction