Help with multiple httpservice calls

I need help with multiple httpservice call back to back, doing 10 different mysql query at startup of the app loading results into 14 datagrids/combobox all queries are to different tables.

Hello,
I think what Grizzzzzzzzzz means is the following:
    <mx:HTTPService id="serviceOne"
        url="here goes url"
        result="resultHandler1(event);"
        fault="faultHandler(event);"/>
    <mx:HTTPService id="serviceTwo"
        url="here goes url"
        result="resultHandler2(event);"
        fault="faultHandler(event);"/>
    <mx:HTTPService id="serviceThree"
        url="here goes url"
        result="resultHandler3(event);"
        fault="faultHandler(event);"/>
     // Result handler 1
     private function resultHandler1(event:ResultEvent):void{
          //Here do something with the results
         xmlCollection = event.result as XML;
         //then call the next service
         serviceTwo.send();
      // Result handler 2
      private function resultHandler2(event:ResultEvent):void{
          //Here do something with the results
         xmlCollection = event.result as XML;
         //then call the next service
          serviceThree.send();
I hope this helps,
Pierre

Similar Messages

  • Help with multiple contacts with multiple phone numbers

    I'm fairly new to the iPhone so thanks in advance for any help with this issue.
    I have contact list with records for a lot of people (300+), each with several phone numbers each, home, mobile & work, etc, .I can't seem to find a way to have the iPhone announce the name & number or name & type (home,mobile,work) of the caller from the contact list, my old cell phone could do that easily.
    At the moment what I've been doing as a work around for a few (important) people is to create a custom ringtone for that caller & that phone number.  Since it also seems there's no way to attach a different ringtones to each number in a single contact record I've had to create multiple contact records for each person, each with a different name/number combination such as "John Doe Work", "John Doe Home" or John Doe Mobile" then assign to it the custom ringtone I created for that name/number. 
    I need to this so that if I receive a call while I'm driving (or whatever) that I can't answer right then for some reason (often happens),  the ringtone I created for that name & number helpfully lets me know  who & where their calling from.  It's very important to know where someone is calling from, if someone's calling from home then I know I've got some time,  but if their calling from work then I need to get back to them quickly.
    This is a real pain!, having to make multiple contacts & ringtones for a every person with multiple numbers is a extraordinary waste of time.  My old cell phone could do this with no problem but there doesn't seem to be any way to do this with my new iphone.  Am I missing something here?  I am new to the iPhone so if there’s a solution to this that I’ve missed I'd very much appreciate the assistance.
    Thanks in advance.
    Al

    https://discussions.apple.com/message/18271382#18271382

  • Need help with how to call VB proceedure to open Adobe reader pdf file from differnt folders

    Using  MS access 9.0.2720  visual basic proceedure to call Adobe reader to open a specific flle from a folder on my c drive.
    useing the shell command , shellexecute is not available in the version I'm using.
    I can call the Reader with this code:   call shell "C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe"  and it will open reader, but
    I can't seem to get it to open a specific PDF file, I tried
    call shell "C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" & "(folderpath)\.95.pdf"
    This use to work when I was running Xp and acrobat 5.0 , I am currentlt running windows 7
    thanks in advance..

    I am getting the exact error trying to down load bank statements but when I go to 'uncheck' the "Do not save encrypted page to disk" box it is ALREADY unchecked.  Can't get my bank statements down loaded.  Any other suggestions.  Need help quick.

  • Search Help with Web Dynpro call on another system

    Hi all,
    I have to create a search help with web dynpro on a field but the database is on another system... How can I do?
    Many Thanks in advance...

    I would use a search help exit. Nothing WDA specific here, as this has been possible long before WDA came around.  With a search help exit you define the search help like normal, but instead of database table or view being the source of selection, you have a function module.  Within the coding of this function module you can call an RFC to read data from another system or call a web service if you need to bridge over to something that isn't ABAP based.
    You can read more about Search Help Exits here:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cf/21ee52446011d189700000e8322d00/frameset.htm

  • Problem with multiple processToolkit() calls

    I wonder if anyone can help with this problem.
    My applet is triggered by incoming SMS. It works as expected unless the applet receives two SMS within a short space of time. In order to process the incoming SMS, the processToolkit() method is called by the Javacard framework. But what I think is happening is that if the first call to processTookit() has finished, the method will not be called again, thus the second SMS is never acted upon.
    Does anyone know, is this the way it is supposed to work, and if so, is there a workaround?
    Thanks,
    BB

    UPDATE:
    The processToolkit() method IS called twice, but I when i tried to get the proactive handler the second time, it threw an error. So now my problem is making the function that gets called keep trying to get the handler until successful, but for some reason this isn't working. My code is something like:
    functionWhichThrowsError(){
    short error = (short)1;
    while (error != (short)0) {
    try{
    //code which gets he handler
    error = (short)0;
    catch (ToolkitException te){
    continue;
    }

  • Deal with multiple inbound calls on 2 x BRI to one extension number

    This feels like a really dumb question but I have RTFM and still am stuck..  This is my first UC setup, although I do a lot of IP networking...
    We have a UC540W with 2 x BRI so up to 4 PSTN calls.
    I want the inbound calls to go to extension 100 which should appear on a line key on all phones so any user can & should pick up incoming calls.
    Phones are SPA500 Series (504 and 508)
    I am working in CCA.
    If I set it up with Line 100 as a shared number on all phones then only 2 calls can be presented and the 2nd call is only presented to the phone with the first call on it, the line key just shows as in use (red) on all other extensions.
    The phones are not octal line compatible otherwise this would seem to be the answer to the problem.
    I tried setting up (Via CLI) multiple ephone-dn with the same extension number and these appeared in the list for setting an overlay button, but CCA then overwrote these which makes it an unsuitable solution.
    The other option would seem to be to set up a multiple extensions (101-104) and put these into a hunt group and under an overlay button, but as these numbers won't be assigned  to an extension so can't see how to create these within CCA - if I put them in as floating extension then they appear in the list for an overlay button but not in the available list for setting up a hunt group....
    This doesn't seem like such an unusual setup that it should be so difficult...
    TIA
    David

    AFAIK you can have one iCloud account per user account and I can't find any suggestion that there is a limit to the number you can have.
    However if in doing all this on the Mac you are talking about you have already created three iCloud accounts then you can't create any more, and there is no workaround for that. You can still sign into an existing iCloud account which has been created on another device, so is the sixth account you are talking about one which already exists? If it isn't, then you would have to use anoter device to create it, then you should be able to sign into it.
    As to 'dissociating', just signing out in System Preferences>iCloud should do it. AFAIK the accounts are not tied to the hardware.
    All this is to do with iCloud - iTunes accounts are a different can of digital worms and may behave differently.

  • Help With Multiple Schemas In Multiple Environments

    Dear Oracle Forum:
    We have a bit of controversy around the office and I was hoping we could get some expert input to get us on the right track.
    For the purposes of this discussion, we have two machines, development and production. Currently, on each machine, we have one database with multiple schemas, say, one for sales data and another for inventory. The sales data has maybe 200 tables and the inventory has another 50. About 12 times a year, once a month, we have a release and move code from dev to prod. The database is accessed by several hundred Pro*C and Pro*Cobol programs for online transaction processing.
    The problem comes up when we need to have multiple development environments. If I need to work on something for May that requires the customer address field to be 50 characters and somebody else is working on something for July that requires the customer address field to be 100 characters, we can’t both function in the same schema. We have a method of configuring running programs to attach to a given schema/database. Currently, everything connects to the same place. We were told that we should not have the programs running as the owners of the schemas for some reason so we set up additional users. The SALES schema is accessed with the connect string: SALES_USER/[email protected]. (I don’t know where we got dot world from but that is not the current discussion.)
    One of the guys said that we should have 12 copies of the database running, which is kind of painful to think about in my opinion. Oracle is not a lightweight product and there are any number of ancillary processes that would have to be duplicated 12 times.
    My recommendation is that we have 12 schemas each for sales and inventory with 12 users each to access them. We would have something like JAN_SALES_USER, FEB_SALES_USER, etc. Each user would have synonyms set up for each of the tables it is interested in. When my program connects as MAY_SALES_USER, I could select from the customer table and I would get my 50 character address field. When the other user connects as JUL_SALES_USER, he would get his 100 character address field. Both of us would not know anything different.
    Another idea that came up is to have a logon trigger that would set the current schema for that user to the appropriate base schema. When JUL_SALES_USER logs in, the current schema would be set to JUL_SALES, etc. This would simplify things by allowing us to avoid having something like 2400 synonyms to maintain (which could be automated without too much difficulty) but it would complicate things by requiring a trigger.
    There are probably other ways to go about this we have not considered as yet. Any input you can give will be appreciated.
    Regards,
    /Bob Bryan

    Hans Forbrich wrote:
    I'd rather see you with 12 schemas than with 12 databases. Unless you have lots of CPUs to spare ... and lots of cash to pay for those extra CPU licenses.
    Then again, I'd take it one step further and ask to investigate the base design. There should be little reason to change the schema based on time. Indeed, from what little I know of your app, I'd have to ask whether adding a 'date' column and appropriate views or properly coded SQL statements might simplify things. Interesting. If we were to have one big Customer table with views for each month, how would we handle the case where the May people have to see 50 character address and July have to see a 100 character address field. I guess we could have MAY_ADDRESS VARCHAR2(50) and JULY_ADDRESS VARCHAR2(100) and take care to make sure that people connecting as May can only see the May columns, etc. This is simpler than multiple schemas?
    I may have overly simplified things in my effort to get something down that would not require too much explanation. The big thing is that multiple people are doing development and they have to be independent of each other. If we were to drop a column for July, the May people will have trouble compiling if we don’t keep things separate. It is not a case of making the data available. The data in development is something we cook up to allow us to test. The other part is the code we compile now will be released to production one of these times. In production, there is only a need for one database.
    We are moving from another database product where multiple databases are effectively different sets of files. We have lots of disk space so multiple databases were no problem. Oracle is such a powerful product; I can’t believe there is not some way to set up something similar.

  • Help with multiple case statements

    Hello,
    I am new to BO.  I am on XI 3.0.  SQL 2005.  In Designer, I am trying to create a measure in a financial universe that would end up being multiple case statements within one select.  This is what I tried to do, but it doesn't work with the two case statements.  Can I use an ELSE leading into the second CASE WHEN somehow?  How can I accomplish this?  Sorry for my ignorance!
    CASE WHEN dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month = 12 THEN dbo.ClientBudgetMonth.Stage1Sales END
    CASE WHEN  dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month = 11 THEN dbo.ClientBudgetMonth.Stage1Sales END
    Any Suggestions?
    Thanks,
    Holly

    Holly,
    I don't know enough about your data or requirement to provide a solution, however, the construct that you post will not work because it causes you to build an object with multiple case statements when only one case statement per object is permitted.  From what I see in your code I would be inclined to combine the two statements into one as such:
    CASE WHEN dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month in (11,12) THEN dbo.ClientBudgetMonth.Stage1Sales else null END
    Thanks,
    John

  • Help with multiple nat translation on a Cisco Nexus 3548

    Hi All,
    I need a little help with a NAT configuration on a cisco Nexus 3548 version 6.0(2)A4(3).
    What currently have is as follows:
    internal network: 192.168.4.0/24
    nexus router (routerA):
      LAN Side: vlan104 interface 192.168.4.201/24
      WAN Side: Eth1/48 interface 172.24.101.2/24
      remote network: 159.43.48.32/27
      remote gateway: 172.24.101.1/24
    use ACL's to ensure that only specific traffic is allowed out and in.
    allow a specific connection from a different internal network (192.168.3.0/24) to talk to port 159.43.48.34:1025
    Clients on the internal network 192.168.4.0, need to be able to connect to services (port 14002, port 8101) running on 159.43.48.34, but they must be SNAT'ed through the WAN interface as coming from 159.43.65.81
    Currently we have this working but the internal lan clients need to know how to get to 159.43.48.34/27 and therefore we need to route this network in our internal network.
    What we really want is to do is provide an address such as 192.168.4.203 for internal clients to use for connectivity to the various services, and then this address would be SNAT'ed to 159.43.65.81 over the WAN. We still want to secure the traffic in both directions.
    In the past i've been able to do this with inside and outside nat's and i haven't had to configure an interface on the router for the internal address, it has just been "stood up" by the nat rules. For example (this is how i've done it before):
    LAN interface
    ip nat outside
    WAN interface
    ip nat inside
    ip nat inside source static159.43.65.81 192.168.4.203
    ip nat outside source static 159.43.65.81 192.168.4.203
    but, trying to implement this sort of config on the Nexus isn't working.
    I am wondering if the Nexus behaves differently than ios based routers.
    I'd appreciate any help to get this config working.
    Thanks in advance,
    Les

    Les
    The issue with an "ip nat outside ..." static is that from the inside routing is done before NAT.
    So what happens is that the destination IP is 192.168.4.203 and the Nexus will do a route lookup, see it is directly connected so it won't forward the packet to the outside interface so it doesn't get translated.
    If you enter "ip nat outside source static 159.43.48.34 192.168.4.203" then on IOS it adds a host specific route to the routing table for 192.168.4.203 as directly connected.
    So you do a ping from a 192.168.3.x client  it looks like it is working but actually the L3 device is simply responding and the packet never gets to the server.
    Apologies for the long winded explanation but NXOS might behave differently and I wanted you to know what to look for.
    So with IOS there is the "add-route" option at the end of the NAT statement and if you use this it would add a host specific route into the routing table like this -
    192.168.4.203 255.255.255.255 159.43.48.34
    this is a recursive route ie. the device must know how to get to 159.43.48.34 but your Nexus should.
    What the above does is make sure any packets arriving at the Nexus for 192.168.4.203 get routed to the outside interface and so are translated.
    So firstly see if that option is available with your NAT statement ie.
    "ip nat outside source static 159.43.48.34 192.168.4.203 add-route"
    if it isn't then try adding just the static statement without it and then have a look at the routing table. If it hasn't put in a host specific route showing as directly connected which it may not, as it may behave differently, then you can manually add a route ie.
    192.168.4.203 255.255.255.255 <next hop IP>
    note that the next hop IP doesn't have to be the server here it could just be the next hop from the Nexus switch. All you are trying to do is get the packet routed to the outside interface.
    Hope that makes sense.
    Edit - one thing I haven't tried is to use a different IP subnet for NAT ie. one that is still part of your internal range but unused and then having a route on the Nexus, in your case, pointing to the outside interface and you redistribute this subnet into your IGP. Then you add the NAT statement.
    What may happen is it still adds a host specific route showing as directly connected but it may not because the Nexus wouldn't actually have a directly connected interface for that subnet.
    I suspect it would though.
    If it did work then it would still mean you didn't need to advertise the public IP internally.
    If I get the chance I'll test it later today.
    Jon

  • Help With Multiple Class Objects With Methods

    I am dealing with multiple classes. I am wondering why I am getting an error on this line it's by the bottom
              obj1.array() = newArray[i];
    It gives the array out of bounds. On another note I believe I can change obj1 to just like incomingArray if I wanted correct since it's just a reference because I should be able to do this method sort on any array.
    method : selSort
    input - none
    output - void
    This is where we sort the arary
    Pseudocode Code:
    1 Initialize variable oldlocation to hold spot of smallest number in original array
    2 Initialize variable smallnumber to store smallest number in original array
    3 Initialize new integer array
    4 Set new array length to length of original array
    5 Initialize variable length to store lengh of new array
    6 For i = 0 and continue till i < new array length
    6.1 Find smallest number in original array
    6.2 Put the smallest number in new array
    6.3 Remove smallest number from original array
    7 Copy contents of new array that is sorted to original array
    Basic concept is to repetitively find the smallest
    (or largest) item in the original array. Once smallest
    is found, move it to the next spot in a new array and
    remove it from the old array.
    public void selSort ()
         int oldlocation = 0;
         int smallnumber = 0;
         int [] newArray = obj1.array();
         newArray = new int [obj1.length()];
         int length = newArray.length;
         for (int i = 0; i < newArray.length; i++)
    //          System.out.println("Test 1");
              newArray[i] = obj1.sortSmall();
    //          System.out.println("Test 2");
              smallnumber = obj1.sortSmall();
    //          System.out.println("This is the smallest number " + smallnumber);
              oldlocation = obj1.location(smallnumber);
    //          System.out.println("This is the old location " + oldlocation);
    //          System.out.println("Test 3");
              obj1.removeLocation(oldlocation);
    //          System.out.println("Test 4");
         System.out.println();
         System.out.println("The sorted array looks like");
         for (int k = 0; k < newArray.length; k++)
              System.out.print(newArray[k] + " ");
         System.out.println();
         System.out.println();
         obj1.resize(newArray.length);
         for (int i = 0; i < newArray.length; i++)
              obj1.array()[i] = newArray[i];
         return;

    method : selSort
    input - none
    output - void
    This is where we sort the arary
    Pseudocode Code:
    1 Initialize variable oldlocation to hold spot of smallest number in original array
    2 Initialize variable smallnumber to store smallest number in original array
    3 Initialize new integer array
    4 Set new array length to length of original array
    5 Initialize variable length to store lengh of new array
    6 For i = 0 and continue till i < new array length
    6.1 Find smallest number in original array
    6.2 Put the smallest number in new array
    6.3 Remove smallest number from original array
    7 Copy contents of new array that is sorted to original array
    Basic concept is to repetitively find the smallest
    (or largest) item in the original array. Once smallest
    is found, move it to the next spot in a new array and
    remove it from the old array.
    public void selSort ()
         int oldlocation = 0;
         int smallnumber = 0;
         int [] newArray = obj1.array();
         newArray = new int [obj1.length()];
         int length = newArray.length;
         for (int i = 0; i < newArray.length; i++)
    //          System.out.println("Test 1");
              newArray[i] = obj1.sortSmall();
    //          System.out.println("Test 2");
              smallnumber = obj1.sortSmall();
    //          System.out.println("This is the smallest number " + smallnumber);
              oldlocation = obj1.location(smallnumber);
    //          System.out.println("This is the old location " + oldlocation);
    //          System.out.println("Test 3");
              obj1.removeLocation(oldlocation);
    //          System.out.println("Test 4");
         System.out.println();
         System.out.println("The sorted array looks like");
         for (int k = 0; k < newArray.length; k++)
              System.out.print(newArray[k] + " ");
         System.out.println();
         System.out.println();
         obj1.resize(newArray.length);
         for (int i = 0; i < newArray.length; i++)
              obj1.array() = newArray[i];
         return;

  • Need help with multiple accounts

    I forgot my original password for my itunes account.  Stupidly, i set up another one.  Now I can't play my songs from my original account because I hace to put in that password.  Tried reseting the password, but the email address from that account has been deactivated, so when it says" will sennd to email address on file, I can't retrive the email to rest the password.  Is there a way to merge both accounts?

    No.  You cannot merge the accounts.  Sorry.
    You can try contacting itunes support for help with your password.

  • STILL NEED help with MULTIPLE COMPUTER usage

    please please... it wont let me transfer songs from this 2nd computer to the ipod... PLEASE... i already set it to manual and it still wont work!

    See this.
    Using iPod with multiple computers.
    If you don't understand how manual transfer works, see this also.
    Manual transfer.

  • Newbie needs help with multiple devices?

    Hi and best wishes to all.
    I could really use some advice on the following.
    I purchased an iPhone and set it up on my PC in the normal way.
    A few months later, my Creative Vision battery died, and Creative's only advice
    was "buy a new one!". No chance Mr. Creative! If you call that customer care, I'm moving to Apple! So I purchased a 64Gb iPod Touch and installed that.
    I must admit to a little difficulty trying to manage both devices in iTunes, but I'm also willing to admit that if I found the time to read the manuals, I'd probably get it right!
    My main query is this:
    I now use a second laptop when I'm away from my office and I want to mirror my main PC with my portable one, so that I can manage the iPhone and iPod on both machines.
    Any advice on all of the above would be greatly appreciated.
    Thaks in advance to all, and very best wishes!

    rf4c wrote:
    Hi and best wishes to all.
    I could really use some advice on the following.
    I must admit to a little difficulty trying to manage both devices in iTunes, but I'm also willing to admit that if I found the time to read the manuals, I'd probably get it right!
    Reading manuals is so 20th century. Instead watch this helpful video, courtesy of The New York Times: Yo Jude: Many iPods; One Computer.
    The question of mirroring the library on multiple machines is quite a bit more complicated. Take a look at this support article: iTunes 9: Understanding Home Sharing.

  • Need help with multiple users of a catalog

    I run Lightroom in a small office and several of us have to have access to the image catalog, using Windows XP.  To accomplish this, the images were placed on a shared external drive, the catalog was created on a USB flash drive and Lightroom was loaded on multiple computers.  Everything has been fine and this strategy will work for us.  However, when I move the catalog to another computer (logged on as a different user) the catalog appears with all keywords and image adjustments, but my import presets are not available.  The preset files are located in the preset folder that accompanies the catalog, but they won't appear in the drop down box within Lightroom when attempting to import images.  My temporary solution is to recreate the import presets, which I have done for one other user so far, but I don't want to have to do that for each new user.  If one looks for the preset file, it is located in a folder called "user", but I have not figured out how to get Lightroom to recognize and use the preset files after logging on as a different user.  When I move the catalog (USB flash drive) back to my computer (original computer, original user), then everything is fine again and I can see and use al the presets. 
    Anyone use Lightroom accross users or machines?  Any way to get Lightroom to "see" and use import presets by multiple users?
    Thanks for any help!

    Not really sure if this will help or confuse things...
    If each user has a preset folder/directory, could you not create a symlink that points to oen on the USB device? And then keep all the presets there?
    Disclaimer:  i have not tried this, nor looked at it much, just a thought as i was reading your post.  If it doesn't apply, ignore me!
    Cheers!

  • Problem with multiple Ajax calls to the same Servlet

    Hi,
    I am new to AJAX. I have a requirement where in, i have to make ajax calls to the same servlet in an infinite loop and check for an application context attribute to refresh the contents in the JSP.I am using the following script in JSP. The problem is i am not able to invoke the servlet more than one time.But I am able to go through the script at specific time interval using setInterval() function of Javascript and able to get alerts.But the problem is with xmlhttp.open("Get", url, true);. Its not getting called more than one time, even though i make multiple calls to the function.
    *<script type="text/javascript">*
    var xmlhttp
    var resp
    function fAjax()
    alert("Here");
    xmlhttp=null;
    resp=null;
    // code for Mozilla, etc.
    if (window.XMLHttpRequest)
    xmlhttp=new XMLHttpRequest();
    // code for IE
    else if (window.ActiveXObject)
    xmlhttp=new ActiveXObject("Microsoft.XMLHTTP");
    if (xmlhttp!=null)
    xmlhttp.onreadystatechange=state_Change;
    xmlhttp.open("GET","/PSAPBackOffice/TestServlet",true);
    xmlhttp.send(null);
    else
    alert("Your browser does not support XMLHTTP.")
    function state_Change()
    // if xmlhttp shows "loaded"
    if (xmlhttp.readyState==4)
    // if "OK"
    if (xmlhttp.status==200)
         resp=xmlhttp.responseText;
         //alert(resp);
         if (resp=="CALL"){
         form.method="GET";
         form.action="/Project/Details.jsp          
    form.submit();
    else
    alert("Problem retrieving XML data")
    function callTimer(){
         setInterval("fAjax()",5000);
    *</script>*
    *Code for Servlet here:*
    public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException
    ServletContext objContext= getServletContext();
         String value;
         synchronized (objContext) {
                   value=(String) objContext.getAttribute("Flag");
                        if(value==null){
                        else if(value.equals("Done")){
                             response.setContentType(CONTENT_TYPE);
                             PrintWriter out = null;
                                  try {
                                       out = response.getWriter();
                                  } catch (IOException e) {
                                       // TODO Auto-generated catch block
                                       e.printStackTrace();
                                                                } catch (NullPointerException npe) {
                                       // TODO Auto-generated catch block
                                       npe.printStackTrace();
                             objContext.setAttribute("Flag","No");
                             out.println("CALL");
    Can someone figureout the problem or mistake and help me out.Its urgent and please help me in this regard.Thanks in Advance !

    I'm not sure I'm following you. The mapping from URL to servlet can contain anything you want. So you could have the URL /blah/blah/blah that, with a mapping something like /blah/* would pass all requests with that URL pattern to your servlet - no one has to know it is a servlet. Your servlet could then parse the URL to see what it has to do or you could pass parameters as part of the URL or as hidden fields.

Maybe you are looking for

  • Error while transporting the cube

    Hi all, While I was transporting my cube from Development box to Acceptance box, following error occured.    Execution of programs after import (XPRA)    Transport request   : GCDK905220    System              : NCA    tp path             : /usr/sap/

  • From 1 DB:Data size bigger than max size for this type

    I am getting error while inserting text file as a string in the table (oracle DB)as :java.sql.SQLException: Data size bigger than max size for this type: 11412 This particular column is Long data type. The mystry is there is: In one DB instance the c

  • Removing portion of the text

    Hi All, I have the following table, Full_Name column is the original data and Modified column is from Crystal Report Formula Field. I want to take out 'in Boston', 'in New York', and 'in Los Angeles' from the Full_Name and write it under Modified (as

  • Idoc Processing Error - Communication error calling XI interface

    Hi All, We in the middle of our upgrade from IS-PS-CA 472 to ECC6 and are facing issues processing old Idoc's with status 64 via BD87 the error message says that "Communication error calling XI interface". We have not implemented XI at this point in

  • Possible to download an older version of iMovie?

    Or a free online program that'll let me edit video shot on my Canon PowerShot A620?  I have iMovie '11, and the oldest PowerShot it's compatible with is the A810.