Help with multiple libraries: 1 local, 1 Airdisk

(Note: I posted this on the iTunes board, but I think it has more to do with my Airport Extreme / hard drive setup. It used to work when the library was a USB external drive attached directly. Now that it's on Airport, not so much.)
I have a new 802.11N AirPort Extreme, to which I have connected a LaCie 500GB HD/USB hub. I have a 100GB library of music on this hard drive. The hard drive is an AirPort Disk through the AirPort Extreme.
I used the iTunes consolidate libary option to locate my music files to this AirPort Disk. In the folder just above the music files, I've placed the Album Artwork folder, the iTunes library .xml file, and the library .itl file. To establish this library, I held down OPTION while clicking on iTunes in my dock, then selected this Airport Disk library to open. This worked just fine.
However, I would like to manage a separate local library on my MacBook Pro's hard drive to keep music to listen to at work and my podcasts, etc. In the past, I was able to use the multiple library option to do this when I had my music on an external USB drive (not via Airport). I could select one or the other library, and iTunes would remember the location in Preferences > Advanced. I could switch libraries back and forth often, and iTunes would remember the library location.
This isn't the case anymore. When I establish iTunes to use the Airport Disk library, it works fine. When I try to switch to a local library, it still keeps the AirPort Disk location in Preferences. If I change it to local, then switch back to the Airport library, it keeps the local address in Preferences. Switching it back at that point requires a lengthy process where iTunes has to reindex the file locations presumably.
Please help! This was totally unexpected. Being able to manage a local library is important to me (there are differences between the two, particularly podcasts--that I don't care to have in my "master" library on the Airport Disk).
Thanks in advance.
BTW...I'm on a MacBook Pro, Core 2 Duo, running the most recent version of iTunes.

Update: Now this is happening. Grrr. http://discussions.apple.com/thread.jspa?messageID=4052927&#4052927

Similar Messages

Help with Multiple libraries and one storage location for files

I cannot get an answer to this question anywhere and was really hoping that The [H] would be able to help.
Here is my current set up that allows my wife and I to have completely independent libraries and ratings, but use the same files:
-Shared folder with MP3s on a network drive.
-Two PCs, each with it's own Ipod associated to it with individual libraries but all pointing to the same network share for MP3 Files.
-Each PC is using the SAME Itunes account for downloads.
-Each account has it's own library folder also on a network share.
Now to my question(s)/problem with downloaded content:
(1) Is there any way to have a file that is downloaded from Itunes be automatically placed in a shared location accessible to both Libraries? (Say if I download the latest Jack Johnson album, can it automatically show up in my wife's library and vice versa?)
(2) Is there any way to share the album artwork versus having two copies of everything(one for each library)?
So my goal is to have two libraries with a central location for ALL files, including anything downloaded from Itunes by each individual user. Is this possible?

Have your wife transfer all purchases from the iPad into iTunes, backup her iPad and then sync with iTunes. Everything ... All media and other content will be available in that iTunes library and she will have a current backup.
Assuming that your son will still be sharing your wife's Apple ID (he is too young to have one of his own) .... When you set up his iPad, restore the iPad from your wife's backup and then select only the content that you want your son to have on his iPad in the iTunes library and then sync that iPad with iTunes.
The game progress is stored in the backup and should transfer onto his device when you restore from your wife's backup. You can always delete any content (apps, movies, music) that you don't want your son to have on the iPad, if you missed it when you synced with iTunes after setting the device up for him.
You can set your sync preferences - any way that you want to - for both devices and still use the same iTunes library for both iPads. So ... Yes you can sync any apps that you want to his iPad and any apps that your wife wants to her iPad. You just need to restore your son's iPad from your wife's backup in order to get his game progress onto his iPad.
In case you need these....
Transfer purchases.
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
Remember to have your wife backup her iPad just before you restore his iPad from the backup so that his most recent progress will be available in the backup.

Can i sync my ipad with multiple libraries.

i have recently purchased a new pc and having added my itunes library last night I cannot get my ipad to sync with the new library, it shows up in devices but will not sync. Is it possible to sync devices with multiple libraries? if not, what is the point of having upto 5 devices that can be authorised with an itunes id? any help would be much appreciated, thanks.

If you want to change the computer that it's synced to then see if this user-tip helps : https://discussions.apple.com/docs/DOC-3141
But if you just want to add music from that new computer but not change the computer that it's synced to then see this page : http://support.apple.com/kb/HT1202
You can have your account authorised on up to 5 computers, that allows you to buy and use your content on those computer (e.g. play music, watch films). But some devices are designed to only be synced to one computer at a time, so syncing to a new computer would replace the current contents of the device with what is on the new computer.

Help with multiple httpservice calls

I need help with multiple httpservice call back to back, doing 10 different mysql query at startup of the app loading results into 14 datagrids/combobox all queries are to different tables.

Hello,
I think what Grizzzzzzzzzz means is the following:
    <mx:HTTPService id="serviceOne"
        url="here goes url"
        result="resultHandler1(event);"
        fault="faultHandler(event);"/>
    <mx:HTTPService id="serviceTwo"
        url="here goes url"
        result="resultHandler2(event);"
        fault="faultHandler(event);"/>
    <mx:HTTPService id="serviceThree"
        url="here goes url"
        result="resultHandler3(event);"
        fault="faultHandler(event);"/>
     // Result handler 1
     private function resultHandler1(event:ResultEvent):void{
          //Here do something with the results
         xmlCollection = event.result as XML;
         //then call the next service
         serviceTwo.send();
      // Result handler 2
      private function resultHandler2(event:ResultEvent):void{
          //Here do something with the results
         xmlCollection = event.result as XML;
         //then call the next service
          serviceThree.send();
I hope this helps,
Pierre

Can't Sync with Multiple Libraries

My wife gave me an 8 GB iPod Nano for my birthday (I think they really mean 8 gB, but that's not really a big deal). It's got a nice slick aluminum (I think) case and a pretty LCD screen.
I had been resisting getting myself an iPod for a while now because Apple usually screws things up, but she chose it.
Not that I have it, I have decided that I was right. Apple completely screwed this thing up. My wife put a few songs from her laptop on the iPod and then I thought, great. I'll just add some from my laptop. I downloaded the new version of iTunes, but it told me that I couldn't add songs from my library without deleting the songs already on the iPod.
Now, I'm not a moron. I know that there's no technical reason for this reason for this. It's a freakin' piece of flash memory with a usb port and some dsp circuits. And it's one of the most expensive one's on the market. So why doesn't it work correctly?
This gd thing cost my wife $275 and IT DOESN"T WORK!!!! I'd take the POS back except that she already got my name engraved on it (not to mention that it might hurt her feelings).
Can someone please explain why Mac is trying to screw its customers over and why its customers put up with this BS?
I realize that there are probably hacks to get my iPod to sync with multiple libraries, but for $275, it ought to work right out of the box.

Okay. Okay. So I found the option to manually sync my iPod. I still think that it kind of ***** that the iPod doesn't store the files with their real names but instead uses those funny four letter names.

How do icloud and itunes match work with multiple libraries?

How do icloud and itunes match work with multiple libraries?

This forum is for troubleshooting compatibility issues between Macs and Windows, not iTunes. You'll probably want to repost your question in the iTunes discussions:
http://discussions.apple.com/category.jspa?categoryID=150

How do I go from using a single Apple ID with multiple libraries to using home sharing?

Until now my wife and I have opted to share our iTunes/Apple ID and use multiple libraries to manage our iPhones. This has become increasingly difficult...with issues such as having apps I've downloaded that she doesn't want automatically downloading to her library and even her phone. Now, add in the fact that I want to continue to manage my iTunes library from our PC and allow her to manage hers from her new MacBook Pro and we have good reason to move to home sharing with separate Apple IDs for each of us.
My question is the logistics of doing so. Not only do we need to replicate her existing library on a new Apple ID, but then we need to migrate all the necessary files over to her MacBook Pro. Quite honestly, I don't even know where to begin. Is it possible to associate her existing library with her new Apple ID without having to create her library from scratch? Then is there anyway to migrate only the items in her library over to her MacBook Pro as opposed having to move all of our music & apps? Where do I begin?
Thanks!

Okay...I misunderstood and thought we needed separate ID's...but I see we actually need to use the same ID which simplifies things in my mind a bit. But still some followups...
1) What do you mean by restore the library on her computer? Simply open her library file in iTunes?
2) On our current machine...media is actually split between a couple folders but all under the My Music folder. But there are multiple subfolders (iTunes, Her iPhone, and Amazon MP3). I presume as long as I copy over the entire My Music folder there shouldn't be any access issues when the library is opened on her machine?
3) Is there any easy way to get rid of all the extra files that she doesn't have in her library? For instance, all my music and apps that she doesn't actually want, is there any easy way of separating those out from the files that are actually linked to in her library? Vice versa for me...once we've go her library set up on her machine, any easy way to purge all the extra files from my PC that aren't actually in my library?
Thanks!

ITunes match with multiple libraries

I can't seem to find a satisfactory answer to this. Namely, how does iTunes Match treat multiple libraries on the same Mac. In my case, I spent a lot of time segregating my music. Thus, I have a rock library, a classical library, an instrumental (Windham Hill and Narada) library, an ambient recording library. It makes sense to me to do this rather that dump everything into one pot. That way, I can load a Touch with a specific library and don't have to create a zillion playlists. Using the same iTunes login, how will Match treat these different libraries? Will it only concern itself with what it finds in the currently open library? How will it treat different iPod Touches that are linked to a specific library? Will it want to push the wrong music to a Touch? Would appreciate any thoughts.

One person sets up Match on their computer using the iTunes account. Uploads everything to match.
I would recommend waiting until that person is done, and do computers one at a time. No particular reason, just seems sensible.
Next person sets up match using same iTunes account details. Uploads their stuff. They will then see everything the previous user put into the system, unless you select "Hide music not on this computer" in the view menu. Previous user will now see their stuff too.
Rinse and repeat.
This is how it worked with my multiple machines anyway... As long as every computer uses the same iTunes account for the store, you all get access to the same Match account.

Help with multiple contacts with multiple phone numbers

I'm fairly new to the iPhone so thanks in advance for any help with this issue.
I have contact list with records for a lot of people (300+), each with several phone numbers each, home, mobile & work, etc, .I can't seem to find a way to have the iPhone announce the name & number or name & type (home,mobile,work) of the caller from the contact list, my old cell phone could do that easily.
At the moment what I've been doing as a work around for a few (important) people is to create a custom ringtone for that caller & that phone number. Since it also seems there's no way to attach a different ringtones to each number in a single contact record I've had to create multiple contact records for each person, each with a different name/number combination such as "John Doe Work", "John Doe Home" or John Doe Mobile" then assign to it the custom ringtone I created for that name/number.
I need to this so that if I receive a call while I'm driving (or whatever) that I can't answer right then for some reason (often happens), the ringtone I created for that name & number helpfully lets me know who & where their calling from. It's very important to know where someone is calling from, if someone's calling from home then I know I've got some time, but if their calling from work then I need to get back to them quickly.
This is a real pain!, having to make multiple contacts & ringtones for a every person with multiple numbers is a extraordinary waste of time. My old cell phone could do this with no problem but there doesn't seem to be any way to do this with my new iphone. Am I missing something here? I am new to the iPhone so if there’s a solution to this that I’ve missed I'd very much appreciate the assistance.
Thanks in advance.
Al

https://discussions.apple.com/message/18271382#18271382

Educator managing 120 iPod Touches with multiple libraries

By using multiple libraries I am able to set each library up for a grade level and content area with their particular needs in mind. I am syncing the iPods sometimes as often as two times per week and changing the library each time. Will this affect the life of the iPod? My school has made quite an investment and I want to be sure we get them to last as long as possible.

No, synching the iPods multiple times per week should not affect their life at all. It's not only presumed but recommended that an iPod be synched regularly for backup purposes. This of course assumes that you take care regarding avoiding static electricity shocks, one of the most common causes of failure in electronic devices.
Regards.

Copying from one iphoto library to another/working with multiple libraries

hi-
my current workflow involves having a 'master library' on one of my external HDs where i store ALL of my images (35,000+) and a 'working library' in my macbook pro where i dump most recent pics first. typically i dump to the working library & then about every 3 months, i burn those events onto disc(s) from within iphoto, open my master library and copy from the disc into the master library. then i will seasonally clear the working library out other than a few portfolio items i may want to keep there.
in the past, when i copied onto the disc and then into the master library, the event names and ratings would copy over too (although if i'd keyworded them, that would get screwed up, so i stopped). now it's not working! the correct event names and ratings show up on the disc, but they are not copying into the master library. i believe this is since i upgraded to ilife 09.
any ideas? it is essential to my current workflow to preserve those event names and ratings. i turned 'autosplit' off in preferences. i tried turning it on. anyone else have experience working with more than one library like this?

thanks larry, i'll check it out and let you know if that solves it. should the free version be sufficient? looks like this could be a really big help if it actually works, cuz i would like to create a 3rd and 4th library for other purposes but not if it's just going to make things more of a pain for me.
i assume this should help with the keyword issue i was having before too? (if i keyworded pics in my working library, the keywords on those pics once copied to the master library would be wrong, it would apply other keywords sometimes, most of the time...)
i appreciate your help.
- artis

Help With Multiple Schemas In Multiple Environments

Dear Oracle Forum:
We have a bit of controversy around the office and I was hoping we could get some expert input to get us on the right track.
For the purposes of this discussion, we have two machines, development and production. Currently, on each machine, we have one database with multiple schemas, say, one for sales data and another for inventory. The sales data has maybe 200 tables and the inventory has another 50. About 12 times a year, once a month, we have a release and move code from dev to prod. The database is accessed by several hundred Pro*C and Pro*Cobol programs for online transaction processing.
The problem comes up when we need to have multiple development environments. If I need to work on something for May that requires the customer address field to be 50 characters and somebody else is working on something for July that requires the customer address field to be 100 characters, we can’t both function in the same schema. We have a method of configuring running programs to attach to a given schema/database. Currently, everything connects to the same place. We were told that we should not have the programs running as the owners of the schemas for some reason so we set up additional users. The SALES schema is accessed with the connect string: SALES_USER/[email protected]. (I don’t know where we got dot world from but that is not the current discussion.)
One of the guys said that we should have 12 copies of the database running, which is kind of painful to think about in my opinion. Oracle is not a lightweight product and there are any number of ancillary processes that would have to be duplicated 12 times.
My recommendation is that we have 12 schemas each for sales and inventory with 12 users each to access them. We would have something like JAN_SALES_USER, FEB_SALES_USER, etc. Each user would have synonyms set up for each of the tables it is interested in. When my program connects as MAY_SALES_USER, I could select from the customer table and I would get my 50 character address field. When the other user connects as JUL_SALES_USER, he would get his 100 character address field. Both of us would not know anything different.
Another idea that came up is to have a logon trigger that would set the current schema for that user to the appropriate base schema. When JUL_SALES_USER logs in, the current schema would be set to JUL_SALES, etc. This would simplify things by allowing us to avoid having something like 2400 synonyms to maintain (which could be automated without too much difficulty) but it would complicate things by requiring a trigger.
There are probably other ways to go about this we have not considered as yet. Any input you can give will be appreciated.
Regards,
/Bob Bryan

Hans Forbrich wrote:
I'd rather see you with 12 schemas than with 12 databases. Unless you have lots of CPUs to spare ... and lots of cash to pay for those extra CPU licenses.
Then again, I'd take it one step further and ask to investigate the base design. There should be little reason to change the schema based on time. Indeed, from what little I know of your app, I'd have to ask whether adding a 'date' column and appropriate views or properly coded SQL statements might simplify things. Interesting. If we were to have one big Customer table with views for each month, how would we handle the case where the May people have to see 50 character address and July have to see a 100 character address field. I guess we could have MAY_ADDRESS VARCHAR2(50) and JULY_ADDRESS VARCHAR2(100) and take care to make sure that people connecting as May can only see the May columns, etc. This is simpler than multiple schemas?
I may have overly simplified things in my effort to get something down that would not require too much explanation. The big thing is that multiple people are doing development and they have to be independent of each other. If we were to drop a column for July, the May people will have trouble compiling if we don’t keep things separate. It is not a case of making the data available. The data in development is something we cook up to allow us to test. The other part is the code we compile now will be released to production one of these times. In production, there is only a need for one database.
We are moving from another database product where multiple databases are effectively different sets of files. We have lots of disk space so multiple databases were no problem. Oracle is such a powerful product; I can’t believe there is not some way to set up something similar.

Help with multiple case statements

Hello,
I am new to BO. I am on XI 3.0. SQL 2005. In Designer, I am trying to create a measure in a financial universe that would end up being multiple case statements within one select. This is what I tried to do, but it doesn't work with the two case statements. Can I use an ELSE leading into the second CASE WHEN somehow? How can I accomplish this? Sorry for my ignorance!
CASE WHEN dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month = 12 THEN dbo.ClientBudgetMonth.Stage1Sales END
CASE WHEN dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month = 11 THEN dbo.ClientBudgetMonth.Stage1Sales END
Any Suggestions?
Thanks,
Holly

Holly,
I don't know enough about your data or requirement to provide a solution, however, the construct that you post will not work because it causes you to build an object with multiple case statements when only one case statement per object is permitted. From what I see in your code I would be inclined to combine the two statements into one as such:
CASE WHEN dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month in (11,12) THEN dbo.ClientBudgetMonth.Stage1Sales else null END
Thanks,
John

Help with multiple nat translation on a Cisco Nexus 3548

Hi All,
I need a little help with a NAT configuration on a cisco Nexus 3548 version 6.0(2)A4(3).
What currently have is as follows:
internal network: 192.168.4.0/24
nexus router (routerA):
LAN Side: vlan104 interface 192.168.4.201/24
WAN Side: Eth1/48 interface 172.24.101.2/24
remote network: 159.43.48.32/27
remote gateway: 172.24.101.1/24
use ACL's to ensure that only specific traffic is allowed out and in.
allow a specific connection from a different internal network (192.168.3.0/24) to talk to port 159.43.48.34:1025
Clients on the internal network 192.168.4.0, need to be able to connect to services (port 14002, port 8101) running on 159.43.48.34, but they must be SNAT'ed through the WAN interface as coming from 159.43.65.81
Currently we have this working but the internal lan clients need to know how to get to 159.43.48.34/27 and therefore we need to route this network in our internal network.
What we really want is to do is provide an address such as 192.168.4.203 for internal clients to use for connectivity to the various services, and then this address would be SNAT'ed to 159.43.65.81 over the WAN. We still want to secure the traffic in both directions.
In the past i've been able to do this with inside and outside nat's and i haven't had to configure an interface on the router for the internal address, it has just been "stood up" by the nat rules. For example (this is how i've done it before):
LAN interface
ip nat outside
WAN interface
ip nat inside
ip nat inside source static159.43.65.81 192.168.4.203
ip nat outside source static 159.43.65.81 192.168.4.203
but, trying to implement this sort of config on the Nexus isn't working.
I am wondering if the Nexus behaves differently than ios based routers.
I'd appreciate any help to get this config working.
Thanks in advance,
Les

Les
The issue with an "ip nat outside ..." static is that from the inside routing is done before NAT.
So what happens is that the destination IP is 192.168.4.203 and the Nexus will do a route lookup, see it is directly connected so it won't forward the packet to the outside interface so it doesn't get translated.
If you enter "ip nat outside source static 159.43.48.34 192.168.4.203" then on IOS it adds a host specific route to the routing table for 192.168.4.203 as directly connected.
So you do a ping from a 192.168.3.x client it looks like it is working but actually the L3 device is simply responding and the packet never gets to the server.
Apologies for the long winded explanation but NXOS might behave differently and I wanted you to know what to look for.
So with IOS there is the "add-route" option at the end of the NAT statement and if you use this it would add a host specific route into the routing table like this -
192.168.4.203 255.255.255.255 159.43.48.34
this is a recursive route ie. the device must know how to get to 159.43.48.34 but your Nexus should.
What the above does is make sure any packets arriving at the Nexus for 192.168.4.203 get routed to the outside interface and so are translated.
So firstly see if that option is available with your NAT statement ie.
"ip nat outside source static 159.43.48.34 192.168.4.203 add-route"
if it isn't then try adding just the static statement without it and then have a look at the routing table. If it hasn't put in a host specific route showing as directly connected which it may not, as it may behave differently, then you can manually add a route ie.
192.168.4.203 255.255.255.255 <next hop IP>
note that the next hop IP doesn't have to be the server here it could just be the next hop from the Nexus switch. All you are trying to do is get the packet routed to the outside interface.
Hope that makes sense.
Edit - one thing I haven't tried is to use a different IP subnet for NAT ie. one that is still part of your internal range but unused and then having a route on the Nexus, in your case, pointing to the outside interface and you redistribute this subnet into your IGP. Then you add the NAT statement.
What may happen is it still adds a host specific route showing as directly connected but it may not because the Nexus wouldn't actually have a directly connected interface for that subnet.
I suspect it would though.
If it did work then it would still mean you didn't need to advertise the public IP internally.
If I get the chance I'll test it later today.
Jon

Help With Multiple Class Objects With Methods

I am dealing with multiple classes. I am wondering why I am getting an error on this line it's by the bottom
          obj1.array() = newArray[i];
It gives the array out of bounds. On another note I believe I can change obj1 to just like incomingArray if I wanted correct since it's just a reference because I should be able to do this method sort on any array.
method : selSort
input - none
output - void
This is where we sort the arary
Pseudocode Code:
1 Initialize variable oldlocation to hold spot of smallest number in original array
2 Initialize variable smallnumber to store smallest number in original array
3 Initialize new integer array
4 Set new array length to length of original array
5 Initialize variable length to store lengh of new array
6 For i = 0 and continue till i < new array length
6.1 Find smallest number in original array
6.2 Put the smallest number in new array
6.3 Remove smallest number from original array
7 Copy contents of new array that is sorted to original array
Basic concept is to repetitively find the smallest
(or largest) item in the original array. Once smallest
is found, move it to the next spot in a new array and
remove it from the old array.
public void selSort ()
     int oldlocation = 0;
     int smallnumber = 0;
     int [] newArray = obj1.array();
     newArray = new int [obj1.length()];
     int length = newArray.length;
     for (int i = 0; i < newArray.length; i++)
//          System.out.println("Test 1");
          newArray[i] = obj1.sortSmall();
//          System.out.println("Test 2");
          smallnumber = obj1.sortSmall();
//          System.out.println("This is the smallest number " + smallnumber);
          oldlocation = obj1.location(smallnumber);
//          System.out.println("This is the old location " + oldlocation);
//          System.out.println("Test 3");
          obj1.removeLocation(oldlocation);
//          System.out.println("Test 4");
     System.out.println();
     System.out.println("The sorted array looks like");
     for (int k = 0; k < newArray.length; k++)
          System.out.print(newArray[k] + " ");
     System.out.println();
     System.out.println();
     obj1.resize(newArray.length);
     for (int i = 0; i < newArray.length; i++)
          obj1.array()[i] = newArray[i];
     return;

method : selSort
input - none
output - void
This is where we sort the arary
Pseudocode Code:
1 Initialize variable oldlocation to hold spot of smallest number in original array
2 Initialize variable smallnumber to store smallest number in original array
3 Initialize new integer array
4 Set new array length to length of original array
5 Initialize variable length to store lengh of new array
6 For i = 0 and continue till i < new array length
6.1 Find smallest number in original array
6.2 Put the smallest number in new array
6.3 Remove smallest number from original array
7 Copy contents of new array that is sorted to original array
Basic concept is to repetitively find the smallest
(or largest) item in the original array. Once smallest
is found, move it to the next spot in a new array and
remove it from the old array.
public void selSort ()
     int oldlocation = 0;
     int smallnumber = 0;
     int [] newArray = obj1.array();
     newArray = new int [obj1.length()];
     int length = newArray.length;
     for (int i = 0; i < newArray.length; i++)
//          System.out.println("Test 1");
          newArray[i] = obj1.sortSmall();
//          System.out.println("Test 2");
          smallnumber = obj1.sortSmall();
//          System.out.println("This is the smallest number " + smallnumber);
          oldlocation = obj1.location(smallnumber);
//          System.out.println("This is the old location " + oldlocation);
//          System.out.println("Test 3");
          obj1.removeLocation(oldlocation);
//          System.out.println("Test 4");
     System.out.println();
     System.out.println("The sorted array looks like");
     for (int k = 0; k < newArray.length; k++)
          System.out.print(newArray[k] + " ");
     System.out.println();
     System.out.println();
     obj1.resize(newArray.length);
     for (int i = 0; i < newArray.length; i++)
          obj1.array() = newArray[i];
     return;

Help with multiple libraries: 1 local, 1 Airdisk

Similar Messages

Maybe you are looking for