Help with multiple monitors and a Kona card
I am trying to get a multi window setup but after I added the Kona card my browser keeps defaulting to the video monitor. I can access it with a mouse but is very inconvenient. How do I get FCP to ignore that monitor which is being driven by the Kona card??
Thanks
John
I think I have it worked out. I put the Kona card in "input passthrough" mode and all seems to work just fine. I had it in MacIntosh desktop and that was causing my problem
If any other suggestions I am sure open to them.
Thanks
John
Similar Messages
-
Hi Guys,
I've run in to a bit of an issue with my MP. I run three monitors off two GT120 cards. They work great in OSX and did work fine in Win7. We've just moved and when Ifired up the mac again at the new place the three monitors work fine in OSX still but when I bootcamp in to Win7 it will only work with one monitor if I power up the other two it either rearranges the screens around of blanks them all so that I end up with a black screen that I can move the mouse pointer around on and the other screens say they have no input and switch off. Occasionally win7 shuts down completely!
It's got me baffled.......I don't know windows that well to start rummaging around too much and OSX is working fine so the hardware is OK. HELP!!
Cheers
Mike
P.S. Everything is up to date.............in fact nothing has changed since the whole set-up was moved to the new house.I think I have it worked out. I put the Kona card in "input passthrough" mode and all seems to work just fine. I had it in MacIntosh desktop and that was causing my problem
If any other suggestions I am sure open to them.
Thanks
John -
Macbook Pro video issue with multiple Monitors and Powerpoint 2011
Hello all,
I have a major issue that is perplexing me. Whenever I hook up a second monitor or projector to my Macbook Pro 15" Early 2010 and launch a Powerpoint slideshow I lose video on both systems immediately and can only recover with a reboot. This is fully reproducable. It doesn't matter if I'm using the mini Display Port to DVI or VGA adapter, same results. Same results with monitors, TVs, or external projectors. I only experience this issue in MS Powerpoint 2011, no other applications. I have 8GB of Ram and a 2.66GHZ i7. It doesn't matter what my resolution is set to, same issue. I will post two error reports below for additional details.
Thank you for the help,
Eric
Interval Since Last Panic Report: 1489459 sec
Panics Since Last Report: 5
Anonymous UUID: AC46B310-CEBD-4130-AAD5-8D163B949E0D
Thu Mar 3 18:08:35 2011
panic(cpu 0 caller 0x9d3bfa): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa5ea3000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x83701768 : 0x21b50c (0x5d4438 0x8370179c 0x223974 0x0)
0x837017b8 : 0x9d3bfa (0xbe92bc 0xc59940 0xbf8424 0x0)
0x83701858 : 0xaee640 (0xe9c5c04 0xd551004 0x100 0xae881b)
0x837018a8 : 0xae5639 (0xd551004 0x100 0x837018d8 0x9c36d7)
0x837018d8 : 0x17169ce (0xd551004 0x100 0x438004ee 0x3)
0x83701a18 : 0xb0d2bd (0xd551004 0xd681004 0x0 0x0)
0x83701a58 : 0x9dce63 (0xd551004 0xd681004 0x0 0x0)
0x83701af8 : 0x9d946f (0x0 0x9 0x0 0x0)
0x83701ca8 : 0x9da2b7 (0x0 0x600d600d 0x7057 0x83701ce8)
0x83701d98 : 0xc94d1c (0xc1d00044 0xbeef0003 0xcaf0133e 0xcaf01340)
0x83701eb8 : 0xc94fba (0xee95804 0x18547e04 0x6d1c6460 0x8)
0x83701f18 : 0xc952a5 (0xee95804 0x18547e04 0x6d1c6460 0x83702180)
0x83701fc8 : 0xca94a9 (0xee95804 0x1844a8e8 0x8370233c 0x83702180)
0x83702238 : 0xc8ac0b (0x6d29e000 0x1844a8e8 0x8370233c 0x83702324)
0x83702398 : 0xc8ae49 (0x6d1de000 0x1844a800 0x1 0x0)
0x837023c8 : 0xc8d90a (0x6d1de000 0x1844a800 0x1 0x9e9de118)
0x83702408 : 0xcafb4e (0x6d1de000 0x1844a800 0x6d3f2274 0x140)
0x83702498 : 0xca13c1 (0x1855ec80 0x1844a800 0x0 0x1)
0x837024f8 : 0xca1628 (0x6d3f2000 0x6d3f277c 0x1844a800 0x0)
0x83702548 : 0xca1afc (0x6d3f2000 0x6d3f277c 0x8370286c 0x8370280c)
0x83702888 : 0xc9e945 (0x6d3f2000 0x6d3f277c 0x1 0x220673)
0x837028a8 : 0xc665a1 (0x6d3f2000 0x6d3f277c 0x18724240 0x500547)
0x837028d8 : 0xca0408 (0x6d3f2000 0x83702a1c 0x83702908 0x4ffa01)
0x83702918 : 0xc6a8de (0x6d3f2000 0x83702a1c 0x83702a1c 0x83702980)
0x83702a58 : 0xca3cfe (0x6d3f2000 0x0 0x83702b6c 0x83702b68)
0x83702b08 : 0xc66c93 (0x6d3f2000 0x0 0x83702b6c 0x83702b68)
0x83702b88 : 0x565a88 (0x6d3f2000 0x0 0x83702ddc 0x83702c14)
0x83702bd8 : 0x566327 (0xcf4e20 0x6d3f2000 0x1cac2d88 0x1)
0x83702c28 : 0x566bdb (0x6d3f2000 0x10 0x83702c70 0x0)
0x83702d48 : 0x285bce (0x6d3f2000 0x10 0x1cac2d88 0x1)
0x83703df8 : 0x21d8ba (0x1cac2d60 0x114625a0 0xfc330 0x8a03)
0x83703e38 : 0x210a3a (0x1cac2d00 0x0 0x1cab2ce0 0x10599fc0)
Backtrace continues...
Kernel Extensions in backtrace (with dependencies):
com.apple.GeForce(6.2.6)@0xc5b000->0xd10fff
dependency: com.apple.NVDAResman(6.2.6)@0x96d000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
com.apple.nvidia.nv50hal(6.2.6)@0x15e0000->0x19f4fff
dependency: com.apple.NVDAResman(6.2.6)@0x96d000
com.apple.NVDAResman(6.2.6)@0x96d000->0xc5afff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
BSD process name corresponding to current thread: Microsoft PowerP
Mac OS version:
10J567
Kernel version:
Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 6097571436804
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x147f000, size 0x65536) - last unloaded 133585664378
loaded kexts:
com.aventail.xgfilt.kext 1.0 - last loaded 362791442640
com.aventail.tun.kext 1.0
com.google.filesystems.fusefs 2.0.3
com.McAfee.kext.AppProtection 1.0.0d1
com.vmware.kext.vmnet 3.1.2
com.vmware.kext.vmioplug 3.1.2
com.vmware.kext.vmci 3.1.2
com.vmware.kext.vmx86 3.1.2
com.mcafee.kext.Virex 1.0.0d1
MonitorControl.drv 1.0d3
com.apple.filesystems.udf 2.1
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleBluetoothMultitouch 54
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AudioAUUC 1.13
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.AppleGraphicsControl 2.8.68
com.apple.GeForce 6.2.6
com.apple.driver.AppleIntelHDGraphics 6.2.6
com.apple.driver.AppleIntelHDGraphicsFB 6.2.6
com.apple.driver.MaxTranserSizeOverrideDriver 2.5.8
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AirPortBrcm43224 426.36.1
com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleHIDKeyboard 141
com.apple.driver.IOBluetoothHIDDriver 2.3.8f7
com.apple.driver.AppleMultitouchDriver 207.10
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.2.6
com.apple.NVDAResman 6.2.6
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
com.apple.iokit.IOBluetoothFamily 2.3.8f7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 312
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898, 5.6 MB
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: My Book, 0x1058 (Western Digital Technologies, Inc.), 0x1102, 0xfd130000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: Hub, 0x050d (Belkin Corporation), 0x0237, 0xfa140000
USB Device: ImageMate 12 in 1 Reader/Writer, 0x0781 (SanDisk Corporation), 0x8989, 0xfa144000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
#2 Panic
Interval Since Last Panic Report: 1490834 sec
Panics Since Last Report: 7
Anonymous UUID: AC46B310-CEBD-4130-AAD5-8D163B949E0D
Thu Mar 3 18:30:57 2011
panic(cpu 2 caller 0x9d3bfa): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xa5e82000 0x0a5480a2, D0, P2/4
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x82f79bd8 : 0x21b50c (0x5d4438 0x82f79c0c 0x223974 0x0)
0x82f79c28 : 0x9d3bfa (0xbe92bc 0xc59940 0xbf8424 0x0)
0x82f79cc8 : 0xaee640 (0xe4e0804 0xe624004 0x100 0x2)
0x82f79d18 : 0xae5639 (0xe624004 0x100 0x82f79d48 0x9c36d7)
0x82f79d48 : 0x171a9ce (0xe624004 0x100 0x438004ee 0x29eac3)
0x82f79e88 : 0xb0d2bd (0xe624004 0xe4db004 0x0 0x0)
0x82f79ec8 : 0x9dce63 (0xe624004 0xe4db004 0x0 0x0)
0x82f79f68 : 0x9d946f (0x0 0x9 0x0 0x0)
0x82f7a118 : 0x9db5fb (0x0 0x600d600d 0x7027 0x82f7a148)
0x82f7a1e8 : 0xc84975 (0xc1d00041 0xbeef0003 0x18512500 0x71)
0x82f7a288 : 0xc84e9f (0x6d204000 0x18512500 0x184fc004 0x0)
0x82f7a2c8 : 0xc5ce0b (0x6d204000 0x18512500 0x184fc004 0x0)
0x82f7a2f8 : 0xc84572 (0x6d204000 0x18512500 0x184fc004 0x0)
0x82f7a318 : 0xc5c418 (0x6d204000 0x18512500 0x184fc004 0x0)
0x82f7a338 : 0xc84e4a (0x6d204000 0x184fc000 0x2 0x2)
0x82f7a378 : 0xc5f7b9 (0x6d204000 0x184fc000 0x0 0x184fc000)
0x82f7a3b8 : 0xc5d269 (0x6d204000 0x6d3cf000 0x6d3d8000 0x1808d400)
0x82f7a408 : 0xcafbed (0x6d204000 0x6d3cf000 0x6d3d8000 0x1808d400)
0x82f7a498 : 0xca13c1 (0x1808d400 0x184fc000 0x0 0x1)
0x82f7a4f8 : 0xca1628 (0x6d3cf000 0x6d3cf77c 0x184fc000 0x0)
0x82f7a548 : 0xca1afc (0x6d3cf000 0x6d3cf77c 0x82f7a86c 0x82f7a80c)
0x82f7a888 : 0xc9e945 (0x6d3cf000 0x6d3cf77c 0x1 0x220673)
0x82f7a8a8 : 0xc665a1 (0x6d3cf000 0x6d3cf77c 0x18513100 0x500547)
0x82f7a8d8 : 0xca0408 (0x6d3cf000 0x82f7aa1c 0x82f7a908 0x6d3cf000)
0x82f7a918 : 0xc6a8de (0x6d3cf000 0x82f7aa1c 0x82f7aa1c 0x82f7a980)
0x82f7aa58 : 0xca3cfe (0x6d3cf000 0x0 0x82f7ab6c 0x82f7ab68)
0x82f7ab08 : 0xc66c93 (0x6d3cf000 0x0 0x82f7ab6c 0x82f7ab68)
0x82f7ab88 : 0x565a88 (0x6d3cf000 0x0 0x82f7addc 0x82f7ac14)
0x82f7abd8 : 0x566327 (0xcf4e20 0x6d3cf000 0x17ce2188 0x1)
0x82f7ac28 : 0x566bdb (0x6d3cf000 0x10 0x82f7ac70 0x0)
0x82f7ad48 : 0x285bce (0x6d3cf000 0x10 0x17ce2188 0x1)
0x82f7bdf8 : 0x21d8ba (0x17ce2160 0x1720f5a0 0x1fd590 0xa017)
Backtrace continues...
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.2.6)@0x15e4000->0x19f8fff
dependency: com.apple.NVDAResman(6.2.6)@0x96d000
com.apple.GeForce(6.2.6)@0xc5b000->0xd10fff
dependency: com.apple.NVDAResman(6.2.6)@0x96d000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
com.apple.NVDAResman(6.2.6)@0x96d000->0xc5afff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x92d000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0x960000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x93e000
BSD process name corresponding to current thread: Microsoft PowerP
Mac OS version:
10J567
Kernel version:
Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 404911465926
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x1483000, size 0x65536) - last unloaded 107949333800
loaded kexts:
com.google.filesystems.fusefs 2.0.3 - last loaded 376650877354
com.McAfee.kext.AppProtection 1.0.0d1
com.vmware.kext.vmnet 3.1.2
com.vmware.kext.vmioplug 3.1.2
com.vmware.kext.vmci 3.1.2
com.vmware.kext.vmx86 3.1.2
com.mcafee.kext.Virex 1.0.0d1
MonitorControl.drv 1.0d3
com.apple.filesystems.udf 2.1
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleBluetoothMultitouch 54
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.driver.AudioAUUC 1.13
com.apple.driver.AppleIntelHDGraphics 6.2.6
com.apple.driver.AppleIntelHDGraphicsFB 6.2.6
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.GeForce 6.2.6
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleGraphicsControl 2.8.68
com.apple.driver.AppleLPC 1.4.12
com.apple.driver.MaxTranserSizeOverrideDriver 2.5.8
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.driver.AppleIRController 303.8
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AirPortBrcm43224 426.36.1
com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.AppleHIDKeyboard 141
com.apple.driver.IOBluetoothHIDDriver 2.3.8f7
com.apple.driver.AppleMultitouchDriver 207.10
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.nvidia.nv50hal 6.2.6
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.8.0fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.NVDAResman 6.2.6
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
com.apple.iokit.IOBluetoothFamily 2.3.8f7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 312
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
Bluetooth: Version 2.3.8f7, 2 service, 19 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500420ASG, 465.76 GB
Serial ATA Device: MATSHITADVD-R UJ-898, 5.6 MB
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000
USB Device: Hub, 0x050d (Belkin Corporation), 0x0237, 0xfa140000
USB Device: ImageMate 12 in 1 Reader/Writer, 0x0781 (SanDisk Corporation), 0x8989, 0xfa144000
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa130000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0236, 0xfa120000
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0xfa113000
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000
USB Device: My Book, 0x1058 (Western Digital Technologies, Inc.), 0x1102, 0xfd130000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0xfd110000I "fixed" it, I did a fresh install and restore and that power point issue is gone. It works now without crashing but I am using Snow Leopard 10.6.4 now instead of 10.6.7. I'm going to update and see what happens.
-
Need help with multiple devices and apple id
Between my husband and myself, we have two Iphones, two Ipads, and one Imac. I back all of them up on my Imac using ONE iTunes account....we prefer not use Icloud, and I think that helps keep the information on each device relatively separate from each other...no overlaps with contacts and calendars. We have one APPLE id and password, that we use for Itunes and the App Store. We just got the Iphone 6 for my husband, and it keeps asking him to enter his Icloud PW.(his recognized user name is his PRIMARY email address)...which presumably he does not have, nor does he need (or maybe he does I need some real guidance on that). To keep this from making him crazy can I just delete his Icloud account, which again presumably, was created automatically with the new Iphone 6 set up??
Similarly, I need to use FIND my Phone (etc), and HIS devices are not in MY listed devices....is this because he NEEDS his own APPLE ID, or is there a way to add his devices to my list of devices within the APP....I thought because we share the Itunes account they should all be in MY devices.
Can someone help me make sense of this?
THANKS!!Hello melissaben6250,
Thank you for using Apple Support Communities.
I understand that you are not seeing your husbands new iPhone 6 in your Find My iPhone app. First, while you may "prefer not use iCloud", you are using it, at least in regards to Find My iPhone for your existing devices.
Now, for your husband's phone and Find My iPhone. It sounds like during the setup of his phone, he logged in to his Apple ID and even possibly created another iCloud account. In order to see his phone on your existing Find My iPhone, it will have to log in to the iCloud account where the other devices are signed in. Take a look at this article on troubleshooting Find My iPhone, especially the first section on the device not appearing.
iCloud: Troubleshooting Find My iPhone, iPad, iPod touch, or Mac - Apple Support
Cheers,
Jeff D. -
Help with Multiple libraries and one storage location for files
I cannot get an answer to this question anywhere and was really hoping that The [H] would be able to help.
Here is my current set up that allows my wife and I to have completely independent libraries and ratings, but use the same files:
-Shared folder with MP3s on a network drive.
-Two PCs, each with it's own Ipod associated to it with individual libraries but all pointing to the same network share for MP3 Files.
-Each PC is using the SAME Itunes account for downloads.
-Each account has it's own library folder also on a network share.
Now to my question(s)/problem with downloaded content:
(1) Is there any way to have a file that is downloaded from Itunes be automatically placed in a shared location accessible to both Libraries? (Say if I download the latest Jack Johnson album, can it automatically show up in my wife's library and vice versa?)
(2) Is there any way to share the album artwork versus having two copies of everything(one for each library)?
So my goal is to have two libraries with a central location for ALL files, including anything downloaded from Itunes by each individual user. Is this possible?Have your wife transfer all purchases from the iPad into iTunes, backup her iPad and then sync with iTunes. Everything ... All media and other content will be available in that iTunes library and she will have a current backup.
Assuming that your son will still be sharing your wife's Apple ID (he is too young to have one of his own) .... When you set up his iPad, restore the iPad from your wife's backup and then select only the content that you want your son to have on his iPad in the iTunes library and then sync that iPad with iTunes.
The game progress is stored in the backup and should transfer onto his device when you restore from your wife's backup. You can always delete any content (apps, movies, music) that you don't want your son to have on the iPad, if you missed it when you synced with iTunes after setting the device up for him.
You can set your sync preferences - any way that you want to - for both devices and still use the same iTunes library for both iPads. So ... Yes you can sync any apps that you want to his iPad and any apps that your wife wants to her iPad. You just need to restore your son's iPad from your wife's backup in order to get his game progress onto his iPad.
In case you need these....
Transfer purchases.
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
Remember to have your wife backup her iPad just before you restore his iPad from the backup so that his most recent progress will be available in the backup. -
Help with multiple devices and one ID
I am sure this has been asked before but i apologize as I am new at all this.
This is my issue...
In April I bought my wife and iPad 2 signed up for an ID and started downloading apps..no problems at all so far.
Within a month we had downloaded a bunch of apps for my 4 yr old.
I bought another iPad 2 for my 4 yr old so he can use on his own. This is the issue, in my wives iPad we downloaded some paid apps and some free ones, some of them are games that have been advancing as he is playing them...my wife has also downloaded some paid games that she has been playing.
So here is my dilema, can I sync my wifes iPad with iTunes and then move the apps that I want to my sons iPad?
Also, will the move also include where he left off in the app...for example if this is like a building a zoo type of game and he has half of it built...will the move include his progress or will it make him start from the begining of the game?
i dont want to use the same apps in two different iPads, i just want to transfer his to a new one and leave my wifes in her ipad.
Please let me know if you need more information in order to help me.
Thanks AgainHave your wife transfer all purchases from the iPad into iTunes, backup her iPad and then sync with iTunes. Everything ... All media and other content will be available in that iTunes library and she will have a current backup.
Assuming that your son will still be sharing your wife's Apple ID (he is too young to have one of his own) .... When you set up his iPad, restore the iPad from your wife's backup and then select only the content that you want your son to have on his iPad in the iTunes library and then sync that iPad with iTunes.
The game progress is stored in the backup and should transfer onto his device when you restore from your wife's backup. You can always delete any content (apps, movies, music) that you don't want your son to have on the iPad, if you missed it when you synced with iTunes after setting the device up for him.
You can set your sync preferences - any way that you want to - for both devices and still use the same iTunes library for both iPads. So ... Yes you can sync any apps that you want to his iPad and any apps that your wife wants to her iPad. You just need to restore your son's iPad from your wife's backup in order to get his game progress onto his iPad.
In case you need these....
Transfer purchases.
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
Remember to have your wife backup her iPad just before you restore his iPad from the backup so that his most recent progress will be available in the backup. -
Help with Multiple VLANS and IP Phone Setup.
Although i have a 3com, I have a cisco IP Phone. I have the IP Phone connected to the 3com swithport using a hybrid port. It's a tagged member of vlan3 (voice net) and an untagged member of vlan1(native data)
The ip phone gets the right DHCP address for vlan3 ( 10.x.x.x ) but the laptop connected to the ip phone gets the IP for vlan 3 as well.
I want the laptop to get the IP of the native vlan ( 192.168.x.x)
what would the port setup need to be ? does it need to be a trunk ? i have the PVID of the port set to vlan3, this allows the IP phone to get its vlan3 DHCP address.
any help would be greatly appreciated.
The 3com OS is very similar to the latest of CISCO IOS'.
so explain wtih syntax and i'm sure the 3com can relate.Based on your description of a 'Hybrid Port' this sounds like Cisco's 'Multi-VLAN Port' that was a feature of the 2900XL/3500XL series switches. This feature has however long since gone......
With a Cisco switch an access port supporting an Access VLAN & a Voice VLAN is effectively a Trunk with only one Tagged VLAN and the Native VLAN:
interface FastEthernet0/1
switchport mode access
switchport access vlan 10
switchport voice vlan 100
This results in the same configuration as:
interface FastEthernet0/1
switchport mode trunk
switchport trunk encapsulation dot1q
switchport trunk native vlan 10
switchport trunk allowed vlan 100
With the exception of CDP packets being sent advertising the Voice VLAN.
With regards to other IP Phone vendors and DHCP Vendor Options - the answer is it depends....
Nortel use Vendor Option 144 to inform the IP Phone of the Voice VLAN and Option 128 for the Server (PBX) to use. Ericsson uses Vendor Option 43 that can be configured to tell the IP Phone the VLAN and the Web server to read the config file from.
I don't think you will get this working automatically with your 3Com switches, you can however manually configure the VLAN on the Cisco IP Phones.
HTH
Andy -
Help with multiple recordsets and pulling an ID value (ASP)
I started this discussion when first developing my project and posted on the General Tab. I have figured out that issue (trying to get my Insert to work in ASP) but now am having trouble retrieving an ID value. It should be simple. I want to insert a new record into a single table and want to create a unique ID field. I am using SQL Server and tried the Identity setting but won't be able to have admin privileges which are required to set the ID. So, I'd like to just take the ID value from the last record and just add '1' to it to get a new unique ID manually. My INSERT portion was working, so I just decided to query the records to retrieve the last CatalogID and add '1' to get my new ID. But it's not working! I tried opening both a command and a recordset, but get various errors on invalid command use.
Any help would be great! I'm new to all of this!
I've posted a code snippet of what I thought I should do:
<%LANGUAGE = “VBSCRIPT” CODEPAGE=”65001”%)
<!--#include file=”Connections/CapConnect.asp”” -->
<%
If (Cstr(Request(“MM_insert”)) = “form1”) Then
Dim MM_editCmd
Dim MM_Lookup
Dim NextCatalogID
Set MM_Lookup = Server.CreateObject (“ADOB.Recordset”)
MM_Lookup.ActiveConnection = MM_CapConnect_STRING
MM_Liikup.Source = “Select CatalogID From dbo.tblCatalogItems ORDERBY CatalogID Ascending”
MMLookup.Open
MM_Lookup.MoveLast
NextCatalogID = MM_Lookup.Fields(“CatalogID”) + 1 'this is supposed to be my new ID value
Set MM_Lookup = Nothing
Set MM_editCmd = Server.CreateObject(“ADOB.Command”)
MM_editCmd.ActiveConnection = MM_CapConnect_STRING
MM_editcmd.CommandText = “INSET INTO dbo.tblCatalogItems (CatalogID, ModelName, Description, POCName, [POCPhone]) VALUES (NextCatalogID, ?,?,?,?)
MM_editcmd.Prepared = True
MM_edit.Parameters.Append MM_editcmd.CreateParameter(“param2”, 202, 1, 100, Request.Form(“modelname”) )
MM_edit.Parameters.Append MM_editcmd.CreateParameter(“param3”, 202, 1, 300, Request.Form(“Description”) )
[Subject line edited by moderator to add server model]Ok, you've got lots of problems. First, explain again why you are not able to modify the CatologID to be an identity column? What is the datatype of that column now?
Next, you are going about selecting your recordset incorrectly. If you are just looking for the last value inserted, there is no need to return all values to the recordset. Just select the max value:
MM_Liikup.Source = “Select MAX (CatalogID) From dbo.tblCatalogItems”
Next, you have a typo in your insert statement "“INSET INTO" should be "INSERT INTO"
Next, your CommandText is wrong. There is no ending quote, and NextCatalogID will be treated as a string literal, not a variable. Use a ? placeholder for it and use the CreateParameter method to populate it.
Next, your command text includes 4 placeholder, but you are only populating 2.
But even when you get this to work it will be problematic. What happens when 2 users execute this at the same time? They both read the same value for the max record and increment by one, but the first will succeed and the second will fail. That's why it is always better to use an auto increment (Identity) column. -
Help with multiple iPhones and Apple ID!
I have my iPhone 5S and my iPad Mini hooked up to my Apple ID. I recently gave my friend my old iPhone 4 for his birthday and it is also using my Apple ID. Whenever he changes/deletes the contacts in his phone, it changes mine. Is there any way to stop this but still allowing him to keep using my Apple ID?
No, not unless one of you stops syncing contacts with iCloud. When you share an iCloud account, all devices see the same data and any actions taken on one device is mirrored on all the others.
-
Help with multiple accounts and email sharing
I am trying to setup a computer for a non-profit and all users need to have access to the same Entourage email account. Is there a way to set this up so each user still has their own OS X account but access the same Entourage email account?
Message was edited by: widowmaker1. Is it possible to maintain more than one account on a single iPad?
Not at the same time. -
[SOLVED] Help with dual monitors (second monitor won't wake up)
Hi. I'm trying to set up dual monitors, but I can't seem to get it to work.
I've got an ASUS P8H67-M EVO motherboard, and I'm using the xf86-video-intel driver. I'm using one VGA and one HDMI.
xrandr gives this
xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 32767 x 32767
VGA1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
1680x1050 60.0*+ 74.9
1600x1000 60.0
1280x1024 75.0 72.0 60.0
1440x900 75.0 59.9
1152x864 75.0
1024x768 75.1 70.1 60.0
800x600 72.2 75.0 60.3
640x480 72.8 75.0 66.7 60.0
720x400 70.1
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.0*+ 50.0 60.0
1920x1080i 50.0 60.1
1680x1050 59.9
1600x900 60.0
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
1280x720 50.0 60.0
1152x720 60.0
1440x576i 50.1
1024x768 75.1 60.0
1440x480i 60.1
832x624 74.6
800x600 75.0 60.3
720x576 50.0
720x480 59.9
640x480 75.0 60.0 59.9
720x400 70.1
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
So it looks to me like both displays are being detected. The geometry looks such that one display is on top of the other, but I can change that using an xorg.conf.d config file (e.g. https://wiki.archlinux.org/index.php/Mu … xorg.conf). I also tried using arandr.
The real problem is that the display on HDMI3 just isn't "waking up". The power is on, but it just sits there in sleep mode.
Any help would be great. I might just be missing something simple. Thanks.
Edit: I just saw a short list of window managers near the bottom of the Arch Multihead page (https://wiki.archlinux.org/index.php/Mu … _xorg.conf). I don't see openbox on that list. Does that mean I'm SOL if I want to use openbox with multiple monitors? This page seems to imply that it should work fine with openbox http://magnatecha.com/dual-monitors-wit … nd-xrandr/.
Last edited by Pacopag (2013-08-19 18:58:36)I use XFCE, and when I boot my computer I just run:
xrandr --output DVI-I-1 --auto --output DVI-I-2 --auto --left-of DVI-I-1
I'm assuming if you modify the names appropriately that it'll work too. I have had issues before trying to run dual monitors without taking both outputs off of a single video card (which is what I'm doing now). For example, I had a graphics card with one (VGA) output and a VGA output on my motherboard. But, connecting the graphics card disabled the on-board VGA. So it is possible (I'm not an expert here) that two displays coming off the motherboard may not work for hardware reasons. -
You cannot shadow a session with multiple monitors enabled in Windows Server 2008 R2
Searching through the forums (and according to KB2484290) it appears that there is no solution to this problem. We are rolling out thin clients that are using dual monitors exclusively and we were very surprised to find out that we couldn't shadow
sessions with dual monitors (which to us means that we can't shadow ANY sessions). This now completely changes our approach to managing these devices.
We are running Windows Server 2008 R2 SP1 with Remote Desktop Services installed. The thin clients are running Windows Embedded Standard 7 with the latest updates / RDP client. All steps have been followed to ensure that the apropriate settings and
permissions have been set up to allow access into the session.
We tested by unchecking the RDP setting “use all my monitors for the remote session”, with that setting disabled shadowing worked
Questions:
1. KB2484290 is from Dec 2010 - It's now April 2012, is there a workaround / hotfix for this issue that will allow us to shadow sessions using the native Microsoft tools?
2. Are there any recommended alternatives (software)? Free/Paid - doesn't matter we just need something that will work. I'm sure there are a few options out there but I am looking for suggestions for what people have used in the past that worked
best for them to help us narrow down the choices.Hi,
In my experience, so far, the workaround is Remote Assistance, Remote Assistance supports multiple monitors, and is the presently recommended solution if you need this functionality. Remote Assistance is a Windows Server Feature that must be explicitly installed
on Windows Server 2008 R2; it is already installed with the client versions of the operating system.
More information:
Remote Assistance Overview
http://technet.microsoft.com/en-us/library/cc753881.aspx
Remote Assistance and Resulting Internet Communication in Windows Server 2008
http://technet.microsoft.com/en-us/library/cc770456(v=ws.10).aspx
As far as I know, there are some third-party tools can be used as the solution, such as Teamviewer, ISL Online, etc.
Please Note: The third-party products discussed here are manufactured by companies that are independent of Microsoft. We make no warranty, implied or otherwise, regarding
these products' performance or reliability.
Regards,
Dollar Wang
Forum Support
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Technology changes life…… -
Today I turn on my HP monitor and I get only a color patterns.
http://youtu.be/2bgwI4rh2Lc
The cable is well attached to the monitor and the PC, I also changed the VGA cable.
My PC is sending the video signal, I tested it with another monitor.
As soon as I turn on my monitor, those patterns appeared. I turned off the monitor and turned it on again, and they reappeared. They are like a test pattern.
Can someone tell me what is wrong with my monitor and how can I fix it?
Thanks!Hello @Gannd,
I understand that your HP Pavilion 2309m LCD wide-screen monitor is only giving you color patterns on it's display. I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try different cables between your computer and monitor.
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
How can use full app with multiple monitor
in Lion and Mountain Lion
when i use Multiple Monitors and move any app in full-screen mode
its become in one monitor and other monitor become blank
but it seems usefull that other monitor show another app in fullscreen mode
how can i do this ?
and sorry for my bad english!!Sorry to say, but it is designed to work that way.
The only way around it that I know of is, not to use full-screen but just fill the screen with the application that you are using.
A -
Can bookmarks be protable for multiple computers? Is it an option to log on and use my bookmarks with multiple computers and locations? Thanks
Profile is a folder which store all your personal data in a safe place
* https://support.mozilla.com/en-US/kb/Profiles
You can use this button to go to the current Firefox profile folder:
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
here explain how to backup profile
* https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
Here explain how to restore it
*https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile
Maybe you are looking for
-
Help! My email push isn't working even when I hit the refresh button!
Please help me. I got a Palm Pixi in December. It worked perfectly until about 2 weeks ago. It suddenly stopped pushing my email, including when I hit the refresh button! I spent many many hours on the phone with both verizon and palm, we tried start
-
Hi forum, I have been trying to get the outlook plugin for the enterprise calendar server working. The calendar part itself works to some extent but the end users are not happy because each time they startup outlook the addressbook server complains.
-
Hi, I have created interactive adobe form in webdynpro for ABAP. When i execute the application it is showing PDF in browser. But i could not able to input any value in it. For example, i want to input the name and when we click on submit it should s
-
Can anyone actually answer this? Somebody has provided me with 2 links that tell me nothing. When I login into Hotmail, I get a message asking me to Download latest Firefox or use Mobile experience. When I dowloaded the latest Firefox, I got a red ci
-
When printing on my Epson PX720WD using Aperture 3 I get lines across the photo 25mm apart, it also appears to be printing at high speed. I have no problems when I print through Epson Easy print.