Help with Multiple Source Video on DVD

I am new to Premiere 9 trying to make a DVD of a birthday party with video from my Canon Vixia HF200 and a slideshow I exported from iPhoto to a m4v file. It was my understanding from reading earlier posts I should export the instant movie I made by going to Share and export "for viewing on computer or make DVD" and then doing the same for the slideshow. But instead of an avi file, it makes a flv file and I am unable to open it or import it back to Premiere 9 to create a DVD. I am really confused as to how to go about putting these two files together to make a DVD. (I can't just put them together on the same project?) I have a iMac computer and am used to making movies on iMovie where you can just add clips from various sources and then export to iDVD. I am finding it difficult to get the help I need from the Help menu on the program. I know I must be doing something wrong. Please help if you can.

Now we know why we've been confused! At the beginning of this discussion, you were talking about creating a DVD. Now you're talking about creating a BluRay disc, which is a very different project.
To output a hi-def file from Premiere Elements, go to Share/Computer/MPEG and use the 1440x1080i output preset.
Should load right into a Toast BluRay project!
I don't know if Toast has a WebDVD project, but you can output a WebDVD project from Premiere Elements. Just set up a menu system as you would if you were creating a DVD or BluRay in Premiere Elements. Then go to Share/WebDVD to output your files.
A webDVD is a combination of FLV video and html files that can be posted to a site (including Photoshop.com) and then navigated just like a DVD -- except that it's online.
Glad to hear you're ordering the book too! Thanks for supporting our Muvipix.com mission!

Similar Messages

Help with multiple Source Paths

Hi:
I have a project that I currently have a single Source Path set to a local drive, e.g., C:\myproj\src and under that directory are two other folders such as pkg1 and pkg2. There are further folders beneath these. JDeveloper correctly displays the source tree for this configuration. But now we have put a configuration management system in place, and the latest stable code is in, say, K:\myproj\src, same subfolders beneath src as in the local source tree.
If I delete the current source paths from my JDeveloper project, then add the local source and then the CM source (K:), the tree still looks correct, but JDeveloper still thinks it is getting all the files from the local disk, even though I have removed almost all of them (all but the ones that are checked out of CM and I am working on). What I am trying to set up is a path where JDeveloper will find the local file first, but anything that isn't there, it will get from the public CM folders. JDeveloper is confused. If I bring a file into the editor that is on the CM drive (K:), I get an EMPTY source window that says C:\myproj\src\whatever.java in the banner instead of the K: version. Can JDeveloper do this or not? Do I need to name every sub-file in the tree as a separate source path?
Thanks,
Mike

What? NO ONE is doing this or trying to do this?

How to create a blu-ray disc with multiple source files

Hello,
How is it possible to create a blu-ray disc, AVCHD recordable DVD with multiple source files from Final Cut Pro 10. Is it possible to create a menu with several chapters corresponding to the sequences (source files)?
Thank you in advance for your support.

Assume you're talking about using the Create Blu-Ray batch template. It's not possible to do with multiple source filles. But if I understand your objectives, you could pretty much get what you think want – discrete movie segments on a single disk with navigation.
The way I'd approach it is by making multiple projects in FCP and then copying the finished versions into a new project, separated by gaps. (You could also use compound clips but I'm not a fan except for very short sequences, which is why I'm suggesting the copy route.) Then export and bring into Compressor.
In Compressor mark your chapters at the gaps between your individual sequences. Then choose the AVCHD option in job actions.
Bear in mind that you'll have to keep the recording time under roughly 30-35 minutes @a5 Mbts/sec
Good luck.
Russ

Howto deal with multiple source files having the same filename...?

Ahoi again.
I'm currently trying to make a package for the recent version of subversive for Eclipse Ganymede and I'm almost finished.
Some time ago the svn.connector components have been split from the official subversive distribution and have to be packed/packaged extra. And here is where my problem arises.
The svn.connector consists (among other things) of two files which are named the same:
http://www.polarion.org/projects/subversive/download/eclipse/2.0/update-site/features/org.polarion.eclipse.team.svn.connector_2.0.3.I20080814-1500.jar
http://www.polarion.org/projects/subversive/download/eclipse/2.0/update-site/plugins/org.polarion.eclipse.team.svn.connector_2.0.3.I20080814-1500.jar
At the moment makepkg downloads the first one, looks at its cache, and thinks that it already has the second file, too, because it has the same name. As a result, I can neither fetch both files nor use both of them in the build()-function...
Are there currently any mechanisms in makepkg to deal with multiple source files having the same name?
The only solution I see at the moment would be to only include the first file in the source array, install it in the build()-function and then manually download the second one via wget and install it after that (AKA Quick & Dirty).
But of course I would prefer a nicer solution to this problem if possible. ^^
TIA!
G_Syme

Allan wrote:I think you should file a bug report asking for a way to deal with this (but I'm not sure how to fix this at the moment...)
OK, I've filed a bug report and have also included a suggestion how to solve this problem.

Help with multiple httpservice calls

I need help with multiple httpservice call back to back, doing 10 different mysql query at startup of the app loading results into 14 datagrids/combobox all queries are to different tables.

Hello,
I think what Grizzzzzzzzzz means is the following:
    <mx:HTTPService id="serviceOne"
        url="here goes url"
        result="resultHandler1(event);"
        fault="faultHandler(event);"/>
    <mx:HTTPService id="serviceTwo"
        url="here goes url"
        result="resultHandler2(event);"
        fault="faultHandler(event);"/>
    <mx:HTTPService id="serviceThree"
        url="here goes url"
        result="resultHandler3(event);"
        fault="faultHandler(event);"/>
     // Result handler 1
     private function resultHandler1(event:ResultEvent):void{
          //Here do something with the results
         xmlCollection = event.result as XML;
         //then call the next service
         serviceTwo.send();
      // Result handler 2
      private function resultHandler2(event:ResultEvent):void{
          //Here do something with the results
         xmlCollection = event.result as XML;
         //then call the next service
          serviceThree.send();
I hope this helps,
Pierre

Help with exporting Minecraft video

Hello. My name is Reynir Aron. I make Minecraft videos and I recently switched from Final Cut Pro 7 to Premiere Pro CS6 and I love using Premiere.
However there is one little problem, when I export the video (even if I do it through Media Encoder) the video looks very smoothed out (for example the text looks really crappy and isn't pixellated).
Can anybody help me? The video is not being scaled up, the source video, my sequence and the export settings are all 1280x720.
By the way, is there any plugin or anything that lets me export using QuickTime Pro 7?
Here is a screenshot of the output I get:
This also happens if I check "Use Maximum Render Quality".
This is what I see in Premiere's Program window:
I have an iMac8,1 (Early 2008) with a 2,8GHz Intel Core 2 Duo, 4GB 800 MHz DDR2 SDRAM, an ATI Radeon HD 2600 Pro 256 MB and I'm running OS X Mountain Lion 10.8.2.

I think my daughter is using FRAPS, but of course not transcoding, just putting that right into Premiere. If your captured file is 30fps, what is the transcoded ProRes file? I don't know if ProRes supports non-video settings, so maybe that is converted to 29.97? But then the edit sequence is 30fps, and I do see an issue - FIELDS is set to LOWER, but should be PROGRESSIVE. That could be causing the jaggies issue on your output.
How did you create the editing Sequence? Try creating a NEW SEQUENCE with the same settings, except make it Progressive, then copy/paste contents of interlaced sequence into the progressive sequence and then Export again, see if that helps. Or just do a short sample to check, to save time.
Thanks
Jeff

Help with High School Football Recruiting DVD

Hello,
I need help with making a DVD highlighting my son's High School Football plays.
I have 10 different DVD's (with 10 different High School Football games that he played in) and I would like to cut various snippets (segments) from each DVD that illustrate his great plays . . . and then put them together onto ONE DVD + add music and I want to add writing too.
I don't know where to begin.
Can anyone help guide me please ?

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Help with detecting child video playback end

I have a flash file that plays multiple videos. I'm trying to
set it up so that all of the videos are loaded by a second (child)
swf, imbedded in the first. The first (root) would call the second
(child) swf, play the video, and at the end of the video, playback
of the parent swf would resume. I can't seem to figure out how to
do this. If I try to make a call to the root from the second swf, I
of course can't because it doesn't know the root exists. The parent
(root) swf has the following code on the frame that calls the
child:
~~~
stop();
var loadVideo:URLRequest = new URLRequest("videoinset.swf");
var videoLoader:Loader = new Loader();
videoLoader.load(loadVideo);
// Identifies which frame to play in inset video
var vidclip:String = "intro";
function swfLoaded(myEvent:Event):void {
stage.addChild(videoLoader);
var mycontent:MovieClip=myEvent.target.content;
videoLoader.x = 210;
videoLoader.y = 150;
mycontent.gotoAndPlay(vidclip);
videoLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,
swfLoaded);
~~~
How can I tell it that when the child gets to frame(#), to go
back to the root and resume play?
I am using netstream to play the videos. There are 6, each
called by a different frame in the videoinset child swf.
Thanks for any help with this.

Any help with this really would be appreciated; if I have not
explained it clearly enough, by all means please let me
know.

I need help with rendering a video.

PC specs: http://gyazo.com/8c5f268350b92762adc1f4229797eba5
Adobe After Effects info: Updated about an hour ago.
Video File info: http://gyazo.com/90a0b66c4dfa99d9d396eb561ac79a49 and http://gyazo.com/74ef689f606792b8a855e6e7d3c45396
Problem: I can't render the effects I added. The render time is over 300 hours.
Details: I got AE yesturday and I imported in a video that I already edited and rendered with Sony Vegas 12. I imported it into AE to add some 3D tracked text for the intro. I added all the text in and I'm ready to render. First try rendering I just get the same exact video I imported, no effects, no text, nothing different. The first render took about 19 minutes. Now the second time I tried changing the format that it would render to. I changed it to h.624 and got told it would take 434 hours to render, I waited about 5 minutes and that time never dropped. I stopped the render, looked online and was told restarting my computer might help. I restarted and tried to render this time in Quicktime, I got about 345 hours this time. Also I was only using 11% of 11.9gb of RAM according to AE.
The video does not have that many effects in it at all. It is simply 3D text tracked to an object for about 7 seconds. I also just need the intro to render so I can put it back together in Vegas 12. Everytime it does render I end up with the same exact video with no effects.
This is what I'm seeing right now: http://gyazo.com/f5fcc73636171c8213451288a507c2ae 14 hours to render a 10 second clip with only some 3D text. about 300 frames.

Thanks for posting the screenshots. It really helps with assessing your problem.
You say "just some 3D text" but I presume this is extruded 3D text using the Ray Traced render option in After Effects.
Unfortunately, your AMD display card does not allow GPU acceleration of After Effects Ray Traced rendering, with the result that you will see ridiculous render times like those you are seeing. The AE Ray Traced render engine is extremely slow without exactly the right display card - see the System Requirements here.
If you are using AE CC you may wish to explore the Cinema 4D integration with AE.
Otherwise, you can fake 3D extrusion by manually building a stack of identical layers in a precomp, or using a script that does the stacking for you.
You can also try third party 3D plugins like Zaxwerks 3D Invigorator, or Video Copilot Element 3D.

Need help with a lyrics video

Ok so I am having a problem with a lyrics video I am making, my very first. I have looked up camera tutorials on youtube and still can not solve the problem. It is very hard for me to explain it in text so I made this short video in which I explain the problem, please if you have the time watch it and maybe you can tell me what is the problem

Your video shows the problem but not much of how you are rigging your camera. I think you have made the camera moves much too complicated. It's always best to think of the AE camera as if it were a real camera on a stage. Think of your 3D layers as actors. If it is easier to move the actors than the camera then move the actors. You have created a very complex 3D set where the camera must fly up and over and around in a large arc. I would have just put a 3D null in the center of the text layers, made it the parent, then animated the null. Any camera moves would have been a simple dolly in and out or a short truck right and left.
If you want to keep the current setup and figure out what is going on with the camera then open up multiple views so you can see what is going on with the camera moves. I've never used SureTarget so I don't know how it functions but I suspect that something like gimbal lock is happening or your orientation is being fouled up because the camera is going over the top and then ending up upside down on the other side of the text layers.

Help with multiple nat translation on a Cisco Nexus 3548

Hi All,
I need a little help with a NAT configuration on a cisco Nexus 3548 version 6.0(2)A4(3).
What currently have is as follows:
internal network: 192.168.4.0/24
nexus router (routerA):
LAN Side: vlan104 interface 192.168.4.201/24
WAN Side: Eth1/48 interface 172.24.101.2/24
remote network: 159.43.48.32/27
remote gateway: 172.24.101.1/24
use ACL's to ensure that only specific traffic is allowed out and in.
allow a specific connection from a different internal network (192.168.3.0/24) to talk to port 159.43.48.34:1025
Clients on the internal network 192.168.4.0, need to be able to connect to services (port 14002, port 8101) running on 159.43.48.34, but they must be SNAT'ed through the WAN interface as coming from 159.43.65.81
Currently we have this working but the internal lan clients need to know how to get to 159.43.48.34/27 and therefore we need to route this network in our internal network.
What we really want is to do is provide an address such as 192.168.4.203 for internal clients to use for connectivity to the various services, and then this address would be SNAT'ed to 159.43.65.81 over the WAN. We still want to secure the traffic in both directions.
In the past i've been able to do this with inside and outside nat's and i haven't had to configure an interface on the router for the internal address, it has just been "stood up" by the nat rules. For example (this is how i've done it before):
LAN interface
ip nat outside
WAN interface
ip nat inside
ip nat inside source static159.43.65.81 192.168.4.203
ip nat outside source static 159.43.65.81 192.168.4.203
but, trying to implement this sort of config on the Nexus isn't working.
I am wondering if the Nexus behaves differently than ios based routers.
I'd appreciate any help to get this config working.
Thanks in advance,
Les

Les
The issue with an "ip nat outside ..." static is that from the inside routing is done before NAT.
So what happens is that the destination IP is 192.168.4.203 and the Nexus will do a route lookup, see it is directly connected so it won't forward the packet to the outside interface so it doesn't get translated.
If you enter "ip nat outside source static 159.43.48.34 192.168.4.203" then on IOS it adds a host specific route to the routing table for 192.168.4.203 as directly connected.
So you do a ping from a 192.168.3.x client it looks like it is working but actually the L3 device is simply responding and the packet never gets to the server.
Apologies for the long winded explanation but NXOS might behave differently and I wanted you to know what to look for.
So with IOS there is the "add-route" option at the end of the NAT statement and if you use this it would add a host specific route into the routing table like this -
192.168.4.203 255.255.255.255 159.43.48.34
this is a recursive route ie. the device must know how to get to 159.43.48.34 but your Nexus should.
What the above does is make sure any packets arriving at the Nexus for 192.168.4.203 get routed to the outside interface and so are translated.
So firstly see if that option is available with your NAT statement ie.
"ip nat outside source static 159.43.48.34 192.168.4.203 add-route"
if it isn't then try adding just the static statement without it and then have a look at the routing table. If it hasn't put in a host specific route showing as directly connected which it may not, as it may behave differently, then you can manually add a route ie.
192.168.4.203 255.255.255.255 <next hop IP>
note that the next hop IP doesn't have to be the server here it could just be the next hop from the Nexus switch. All you are trying to do is get the packet routed to the outside interface.
Hope that makes sense.
Edit - one thing I haven't tried is to use a different IP subnet for NAT ie. one that is still part of your internal range but unused and then having a route on the Nexus, in your case, pointing to the outside interface and you redistribute this subnet into your IGP. Then you add the NAT statement.
What may happen is it still adds a host specific route showing as directly connected but it may not because the Nexus wouldn't actually have a directly connected interface for that subnet.
I suspect it would though.
If it did work then it would still mean you didn't need to advertise the public IP internally.
If I get the chance I'll test it later today.
Jon

Help with multiple contacts with multiple phone numbers

I'm fairly new to the iPhone so thanks in advance for any help with this issue.
I have contact list with records for a lot of people (300+), each with several phone numbers each, home, mobile & work, etc, .I can't seem to find a way to have the iPhone announce the name & number or name & type (home,mobile,work) of the caller from the contact list, my old cell phone could do that easily.
At the moment what I've been doing as a work around for a few (important) people is to create a custom ringtone for that caller & that phone number. Since it also seems there's no way to attach a different ringtones to each number in a single contact record I've had to create multiple contact records for each person, each with a different name/number combination such as "John Doe Work", "John Doe Home" or John Doe Mobile" then assign to it the custom ringtone I created for that name/number.
I need to this so that if I receive a call while I'm driving (or whatever) that I can't answer right then for some reason (often happens), the ringtone I created for that name & number helpfully lets me know who & where their calling from. It's very important to know where someone is calling from, if someone's calling from home then I know I've got some time, but if their calling from work then I need to get back to them quickly.
This is a real pain!, having to make multiple contacts & ringtones for a every person with multiple numbers is a extraordinary waste of time. My old cell phone could do this with no problem but there doesn't seem to be any way to do this with my new iphone. Am I missing something here? I am new to the iPhone so if there’s a solution to this that I’ve missed I'd very much appreciate the assistance.
Thanks in advance.
Al

https://discussions.apple.com/message/18271382#18271382

Help With Multiple Schemas In Multiple Environments

Dear Oracle Forum:
We have a bit of controversy around the office and I was hoping we could get some expert input to get us on the right track.
For the purposes of this discussion, we have two machines, development and production. Currently, on each machine, we have one database with multiple schemas, say, one for sales data and another for inventory. The sales data has maybe 200 tables and the inventory has another 50. About 12 times a year, once a month, we have a release and move code from dev to prod. The database is accessed by several hundred Pro*C and Pro*Cobol programs for online transaction processing.
The problem comes up when we need to have multiple development environments. If I need to work on something for May that requires the customer address field to be 50 characters and somebody else is working on something for July that requires the customer address field to be 100 characters, we can’t both function in the same schema. We have a method of configuring running programs to attach to a given schema/database. Currently, everything connects to the same place. We were told that we should not have the programs running as the owners of the schemas for some reason so we set up additional users. The SALES schema is accessed with the connect string: SALES_USER/[email protected]. (I don’t know where we got dot world from but that is not the current discussion.)
One of the guys said that we should have 12 copies of the database running, which is kind of painful to think about in my opinion. Oracle is not a lightweight product and there are any number of ancillary processes that would have to be duplicated 12 times.
My recommendation is that we have 12 schemas each for sales and inventory with 12 users each to access them. We would have something like JAN_SALES_USER, FEB_SALES_USER, etc. Each user would have synonyms set up for each of the tables it is interested in. When my program connects as MAY_SALES_USER, I could select from the customer table and I would get my 50 character address field. When the other user connects as JUL_SALES_USER, he would get his 100 character address field. Both of us would not know anything different.
Another idea that came up is to have a logon trigger that would set the current schema for that user to the appropriate base schema. When JUL_SALES_USER logs in, the current schema would be set to JUL_SALES, etc. This would simplify things by allowing us to avoid having something like 2400 synonyms to maintain (which could be automated without too much difficulty) but it would complicate things by requiring a trigger.
There are probably other ways to go about this we have not considered as yet. Any input you can give will be appreciated.
Regards,
/Bob Bryan

Hans Forbrich wrote:
I'd rather see you with 12 schemas than with 12 databases. Unless you have lots of CPUs to spare ... and lots of cash to pay for those extra CPU licenses.
Then again, I'd take it one step further and ask to investigate the base design. There should be little reason to change the schema based on time. Indeed, from what little I know of your app, I'd have to ask whether adding a 'date' column and appropriate views or properly coded SQL statements might simplify things. Interesting. If we were to have one big Customer table with views for each month, how would we handle the case where the May people have to see 50 character address and July have to see a 100 character address field. I guess we could have MAY_ADDRESS VARCHAR2(50) and JULY_ADDRESS VARCHAR2(100) and take care to make sure that people connecting as May can only see the May columns, etc. This is simpler than multiple schemas?
I may have overly simplified things in my effort to get something down that would not require too much explanation. The big thing is that multiple people are doing development and they have to be independent of each other. If we were to drop a column for July, the May people will have trouble compiling if we don’t keep things separate. It is not a case of making the data available. The data in development is something we cook up to allow us to test. The other part is the code we compile now will be released to production one of these times. In production, there is only a need for one database.
We are moving from another database product where multiple databases are effectively different sets of files. We have lots of disk space so multiple databases were no problem. Oracle is such a powerful product; I can’t believe there is not some way to set up something similar.

Help with multiple case statements

Hello,
I am new to BO. I am on XI 3.0. SQL 2005. In Designer, I am trying to create a measure in a financial universe that would end up being multiple case statements within one select. This is what I tried to do, but it doesn't work with the two case statements. Can I use an ELSE leading into the second CASE WHEN somehow? How can I accomplish this? Sorry for my ignorance!
CASE WHEN dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month = 12 THEN dbo.ClientBudgetMonth.Stage1Sales END
CASE WHEN dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month = 11 THEN dbo.ClientBudgetMonth.Stage1Sales END
Any Suggestions?
Thanks,
Holly

Holly,
I don't know enough about your data or requirement to provide a solution, however, the construct that you post will not work because it causes you to build an object with multiple case statements when only one case statement per object is permitted. From what I see in your code I would be inclined to combine the two statements into one as such:
CASE WHEN dbo.ClientBudgetYear.DateStage1Approved > 01/01/1900 AND dbo.ClientBudgetMonth.Month in (11,12) THEN dbo.ClientBudgetMonth.Stage1Sales else null END
Thanks,
John

Help With Multiple Class Objects With Methods

I am dealing with multiple classes. I am wondering why I am getting an error on this line it's by the bottom
          obj1.array() = newArray[i];
It gives the array out of bounds. On another note I believe I can change obj1 to just like incomingArray if I wanted correct since it's just a reference because I should be able to do this method sort on any array.
method : selSort
input - none
output - void
This is where we sort the arary
Pseudocode Code:
1 Initialize variable oldlocation to hold spot of smallest number in original array
2 Initialize variable smallnumber to store smallest number in original array
3 Initialize new integer array
4 Set new array length to length of original array
5 Initialize variable length to store lengh of new array
6 For i = 0 and continue till i < new array length
6.1 Find smallest number in original array
6.2 Put the smallest number in new array
6.3 Remove smallest number from original array
7 Copy contents of new array that is sorted to original array
Basic concept is to repetitively find the smallest
(or largest) item in the original array. Once smallest
is found, move it to the next spot in a new array and
remove it from the old array.
public void selSort ()
     int oldlocation = 0;
     int smallnumber = 0;
     int [] newArray = obj1.array();
     newArray = new int [obj1.length()];
     int length = newArray.length;
     for (int i = 0; i < newArray.length; i++)
//          System.out.println("Test 1");
          newArray[i] = obj1.sortSmall();
//          System.out.println("Test 2");
          smallnumber = obj1.sortSmall();
//          System.out.println("This is the smallest number " + smallnumber);
          oldlocation = obj1.location(smallnumber);
//          System.out.println("This is the old location " + oldlocation);
//          System.out.println("Test 3");
          obj1.removeLocation(oldlocation);
//          System.out.println("Test 4");
     System.out.println();
     System.out.println("The sorted array looks like");
     for (int k = 0; k < newArray.length; k++)
          System.out.print(newArray[k] + " ");
     System.out.println();
     System.out.println();
     obj1.resize(newArray.length);
     for (int i = 0; i < newArray.length; i++)
          obj1.array()[i] = newArray[i];
     return;

method : selSort
input - none
output - void
This is where we sort the arary
Pseudocode Code:
1 Initialize variable oldlocation to hold spot of smallest number in original array
2 Initialize variable smallnumber to store smallest number in original array
3 Initialize new integer array
4 Set new array length to length of original array
5 Initialize variable length to store lengh of new array
6 For i = 0 and continue till i < new array length
6.1 Find smallest number in original array
6.2 Put the smallest number in new array
6.3 Remove smallest number from original array
7 Copy contents of new array that is sorted to original array
Basic concept is to repetitively find the smallest
(or largest) item in the original array. Once smallest
is found, move it to the next spot in a new array and
remove it from the old array.
public void selSort ()
     int oldlocation = 0;
     int smallnumber = 0;
     int [] newArray = obj1.array();
     newArray = new int [obj1.length()];
     int length = newArray.length;
     for (int i = 0; i < newArray.length; i++)
//          System.out.println("Test 1");
          newArray[i] = obj1.sortSmall();
//          System.out.println("Test 2");
          smallnumber = obj1.sortSmall();
//          System.out.println("This is the smallest number " + smallnumber);
          oldlocation = obj1.location(smallnumber);
//          System.out.println("This is the old location " + oldlocation);
//          System.out.println("Test 3");
          obj1.removeLocation(oldlocation);
//          System.out.println("Test 4");
     System.out.println();
     System.out.println("The sorted array looks like");
     for (int k = 0; k < newArray.length; k++)
          System.out.print(newArray[k] + " ");
     System.out.println();
     System.out.println();
     obj1.resize(newArray.length);
     for (int i = 0; i < newArray.length; i++)
          obj1.array() = newArray[i];
     return;

Help with Multiple Source Video on DVD

Similar Messages

Maybe you are looking for