Help with my final video please

Hello,
For my Masters degree I created a video in Logic Pro . . .exported that video to Pro Tools and composed sound for it.
I exported the final video from Pro Tools as a .mov and it's final length is 11:40.
For a presentation I need to edit the video down (to fit a time restriction of 7 minutes) and so I was going to import the full video into Logic Pro and then chop bits up and add fades - HOWEVER. . .when I import the video into logic pro it says the video is only 11:07 long and so the piece abruptly ends 33 seconds early in mid piece.
I've edited the video down by a second just to see if an entire new file would fix it but when I import the video into the list of files it still says its only 11:07 long, and when I drag it into the sequencer. . it's STILL 11:07 long.
Can any help me as this is extremely important
Thanks lot for any help.
Aaron.

I just did things the long way.
I imported the 11:07 video itself into Final Cut.
Without rendering I took the very final few frames (black screen). . and had it play at 0.35% of it's original speed. . .I did this to stretch the video time to 11:44. . .I then exported to a quicktime movie so hopefully now it's full speed. (it takes 3 hours to export the video so I won't know for sure until then).
I exported via Quicktime conversion without rendering (as it takes an hour to render the 12 minute video and I didn't have the time to render before burning to quicktime file so I hope it works.

Similar Messages

Help with Rendering/Finalizing Project Please?

Hi,
I am so new to this entire Adobe and video making that I've spent the last few hours pulling hair literally. I am hoping that some of you experts can take some time to give this novice some much needed guidance. Okay, I'm begging!
I recorded a wedding on a XHA1 MiniDV camera in 1080p 24fps. Captured the clips to PP CS4 which in turn makes them MPEG, I believe. Included in my project are addition clips imported from a Canon HF S21 also in 1080p 24fps and a Rebel T2i in ?? format. Didn't use too many clips from the rebel.
Anyhow, my project settings in PP are:
Video - Display format = Frames
Audio - Display format = Audio Samples
Capture Format = HDV
All Scratch disks are saved on to my desktop with 284 GB
Here is a picture of the sequence settings:
Again, sorry for the ignorance and stupiditiy. I am wondering what would help.
I am trying to burn it all with chapter markers and additional features to a DVD.
- What would be the BEST settings for exporting to Encore?
- Should I separate each section into a different sequence - would that help? For example, the pre-ceremony to one sequence. The ceremony to another. The reception to another. Or should I make new projects for each?
- How can I make my computer faster? Is it the memory, ram, etc? What should I do?
Right now, it has failed over and over in rendering in After Effects. It stops encoding when I export to AME. It says 158 hours for rendering in PP.
HELP!
I am using an iMac and here are computer specs (again, I am not even sure what to post to help you all help me):
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i7
Processor Speed: 2.93 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM112.0057.B00
SMC Version (system): 1.59f2
Here is a pic of what I'm working on. I know the pic-in-pic feature probably doesn't help with rendering time either but 158 hours is killing me. In fact, when I go to sleep, I wake up to an error message where PP has closed.

leevang,
Your computer looks great. I wouldn't be too worried about the time PP shows for encoding etc.
I have found that right when I first start to encode a project, 73 hours or 12 hours is normal. Rendering is not necessary for encoding. However when I look back later, the time has dropped greatly.
Down to 2 or 3 hours. that's when I follow Jeff B.'s suggestions when I do a 2X scan.......

I am needing help with the final steps in restoring my iPod Touch 5

I need help with the final steps in restoring my iPod

I was told that the iPod would automatically go to restore mode when connected to wifi. It did not do that

Need Help With After Effects. Please read.

Hey,
So I'm using after effects cs6. The problem I have with it is that the final video after exporting stucks in between and never runs smoothly. I exported my almost 7 minutes video as a quicktime file that is (.mov). SO whenever I play the video in quicktime or any other player, it stucks, sometimes i pause it but it pauses after 10 seconds i click the pause button. sometimes the voice is ahead of sound and vice-versa. It doesnt stuck at the same point everytime. I need my video to run smoothly. Can someone please help.
Appreciate your reply.
Thanks

FAQ: Why is my output file huge, and why doesn't it play back smoothly in a media player?

Help with exporting Minecraft video

Hello. My name is Reynir Aron. I make Minecraft videos and I recently switched from Final Cut Pro 7 to Premiere Pro CS6 and I love using Premiere.
However there is one little problem, when I export the video (even if I do it through Media Encoder) the video looks very smoothed out (for example the text looks really crappy and isn't pixellated).
Can anybody help me? The video is not being scaled up, the source video, my sequence and the export settings are all 1280x720.
By the way, is there any plugin or anything that lets me export using QuickTime Pro 7?
Here is a screenshot of the output I get:
This also happens if I check "Use Maximum Render Quality".
This is what I see in Premiere's Program window:
I have an iMac8,1 (Early 2008) with a 2,8GHz Intel Core 2 Duo, 4GB 800 MHz DDR2 SDRAM, an ATI Radeon HD 2600 Pro 256 MB and I'm running OS X Mountain Lion 10.8.2.

I think my daughter is using FRAPS, but of course not transcoding, just putting that right into Premiere. If your captured file is 30fps, what is the transcoded ProRes file? I don't know if ProRes supports non-video settings, so maybe that is converted to 29.97? But then the edit sequence is 30fps, and I do see an issue - FIELDS is set to LOWER, but should be PROGRESSIVE. That could be causing the jaggies issue on your output.
How did you create the editing Sequence? Try creating a NEW SEQUENCE with the same settings, except make it Progressive, then copy/paste contents of interlaced sequence into the progressive sequence and then Export again, see if that helps. Or just do a short sample to check, to save time.
Thanks
Jeff

Need help with threads?.. please check my approach!!

Hello frnds,
I am trying to write a program.. who monitors my external tool.. please check my way of doing it.. as whenever i write programs having thread.. i end up goosy.. :(
first let me tell.. what I want from program.. I have to start an external tool.. on separate thread.. (as it takes some time).. then it takes some arguments(3 arguments).. from file.. so i read the file.. and have to run tool.. continously.. until there are arguments left.. in file.. or.. user has stopped it by pressing STOP button..
I have to put a marker in file too.. so that.. if program started again.. file is read from marker postion.. !!
Hope I make clear.. what am trying to do!!
My approach is like..
1. Have two buttons.. START and STOP on Frame..
START--> pressed
2. check marker("$" sign.. placed in beginning of file during start).. on file..
     read File from marker.. got 3 arg.. pass it to tool.. and run it.. (on separate thread).. put marker.. (for next reading)
     Step 2.. continously..
3. STOP--> pressed
     until last thread.. stops.. keep running the tool.. and when last thread stops.. stop reading any more arguments..
Question is:
1. Should i read file again and again.. ?.. or read it once after "$" sign.. store data in array.. and once stopped pressed.. read file again.. and put marker ("$" sign) at last read line..
2. how should i know when my thread has stopped.. so I start tool again??.. am totally confused.. !!
please modify my approach.. if u find anything odd..
Thanks a lot in advance
gervini

Hello,
I have no experience with threads or with having more than run "program" in a single java file. All my java files have the same structure. This master.java looks something like this:
---master.java---------------------------------------------------
import java.sql.*;
import...
public class Master {
public static void main(String args []) throws SQLException, IOException {
//create connection pool here
while (true) { // start loop here (each loop takes about five minutes)
// set values of variables
// select a slave process to run (from a list of slave programs)
execute selected slave program
// check for loop exit value
} // end while loop
System.out.println("Program Complete");
} catch (Exception e) {
System.out.println("Error: " + e);
} finally {
if (rSet1 != null)
try { rSet1.close(); } catch( SQLException ignore ) { /* ignored */ }
connection.close();
-------end master.java--------------------------------------------------------
This master.java program will run continuously for days or weeks, each time through the loop starting another slave process which runs for five minutes to up to an hour, which means there may be ten to twenty of these slave processes running simultaneously.
I believe threads is the best way to do this, but I don't know where to locate these slave programs: either inside the master.java program or separate slave.java files? I will need help with either method.
Your help is greatly appreciated. Thank you.
Logan

Need help with flash player installation please !!!!

Hello,
I need help with my flash player installation because every time I access a movie this is the message I receive.
This content on Xfinity TV is not available for viewing with Chrome's "Incognito" mode. To play this video using Chrome, please view this page without "Incognito" mode.
Still having problems? Try resetting your Flash player license.

Incognito mode is a Google Chrome setting when you open a new window (Cmd+Shift+N on a Mac Ctrl+Shift+N on Windows) It opens a "private" window with no cookies and no tracking. The problem with it is that when you disable cookies, your license files are not sent to the site (whetehr it's YouTube or xFinity or any other that uses license files for paid content) and it treats you as if you're a first time visitor. Paid videos won't play wihtout the cookies sending the license file info.
This isn't a Flash Player setting. It's in Chrome. I did some research and according to Google, "Incignito" mode is off by default, and can ONLY be activate by the keyboard shortcut. There IS a way to disable it from the registry http://dev.chromium.org/administrators/policy-list-3#IncognitoModeAvailability

I need help with the https class please.

Hello, i need add an authentication field in my GET request using HTTPS to authenticate users. I put the authentication field using the setRequestProperty method, but it doesn't appear when i print all properties using the getRequestProperties method. I wrote the following code:
try{
URL url = new URL ("https://my_url..");
URLConnection conexion;
conexion = url.openConnection();
conexion.setRequestProperty("Authorization",my_urlEncoder_string);
conexion.setRequestProperty("Host",my_loginServer);
HttpsURLConnection httpsConexion = (HttpsURLConnection) conexion;
httpsConexion.setRequestMethod("GET");
System.out.println("All properties\r\n: " + httpsConexion.getRequestProperties());
}catch ....
when i run the program it show the following text:
All properties: {Host=[my_loginServer]}
Only the Host field is added to my HttpsURLConnection. The authentication field doesnt appear in standar output. How can i add to my HttpsURLConnection an Authentication field?
thanks

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

I need help with the navigation menu please?

I have been working my way through your six part printed instructions and I am styling the header and navigation menu. The bullet points disappeared which was correct and the tabs moved to the right, as they should, but one tab sits underneath another tab and all tabs are covered up by my main heading. This is dreamweaver CS6.
It looks a bit of a mess!

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

Help with detecting child video playback end

I have a flash file that plays multiple videos. I'm trying to
set it up so that all of the videos are loaded by a second (child)
swf, imbedded in the first. The first (root) would call the second
(child) swf, play the video, and at the end of the video, playback
of the parent swf would resume. I can't seem to figure out how to
do this. If I try to make a call to the root from the second swf, I
of course can't because it doesn't know the root exists. The parent
(root) swf has the following code on the frame that calls the
child:
~~~
stop();
var loadVideo:URLRequest = new URLRequest("videoinset.swf");
var videoLoader:Loader = new Loader();
videoLoader.load(loadVideo);
// Identifies which frame to play in inset video
var vidclip:String = "intro";
function swfLoaded(myEvent:Event):void {
stage.addChild(videoLoader);
var mycontent:MovieClip=myEvent.target.content;
videoLoader.x = 210;
videoLoader.y = 150;
mycontent.gotoAndPlay(vidclip);
videoLoader.contentLoaderInfo.addEventListener(Event.COMPLETE,
swfLoaded);
~~~
How can I tell it that when the child gets to frame(#), to go
back to the root and resume play?
I am using netstream to play the videos. There are 6, each
called by a different frame in the videoinset child swf.
Thanks for any help with this.

Any help with this really would be appreciated; if I have not
explained it clearly enough, by all means please let me
know.

Need some help with the colour profile please. Urgent! Thanks

Dear all, I need help with the colour profile of my photoshop CS6.
I've taken a photo with my Canon DSLR. When I opened the raw with ACDSee, the colour looks perfectly ok.
So I go ahead and open in photoshop. I did nothing to the photo. It still looks ok
Then I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
And the colour started to get messed up.
And the output is a total diasater
Put the above photo side by side with the raw, the red has became crimson!!
So I tried the other option, Use the embedded profile
The whole picture turns yellowish in Photoshop's interface
And the output is just the same as the third option.
Could someone please guide me how to fix this? Thank you.

I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
always use the embedded profile when opening tagged images in Photoshop - at that point Photoshop will convert the source colors over to your monitor space correctly
if your colors are wrong at that point either your monitor profile is off, or your source colors are not what you think they are - if other apps are displaying correctly you most likely have either a defective monitor profile or source profile issues
windows calibrate link:
http://windows.microsoft.com/en-US/windows7/Calibrate-your-display
for Photoshop to work properly, i recall you want to have "use my settings for this device" checked in Color Management> Device tab
you may want to download the PDI reference image to check your monitor and print workflows
and complete five easy steps to profile enlightenment in Photoshop
with your settings, monitor profile and source profiles sorted out it should be pretty easy to pinpoint the problem...

I need help with rendering a video.

PC specs: http://gyazo.com/8c5f268350b92762adc1f4229797eba5
Adobe After Effects info: Updated about an hour ago.
Video File info: http://gyazo.com/90a0b66c4dfa99d9d396eb561ac79a49 and http://gyazo.com/74ef689f606792b8a855e6e7d3c45396
Problem: I can't render the effects I added. The render time is over 300 hours.
Details: I got AE yesturday and I imported in a video that I already edited and rendered with Sony Vegas 12. I imported it into AE to add some 3D tracked text for the intro. I added all the text in and I'm ready to render. First try rendering I just get the same exact video I imported, no effects, no text, nothing different. The first render took about 19 minutes. Now the second time I tried changing the format that it would render to. I changed it to h.624 and got told it would take 434 hours to render, I waited about 5 minutes and that time never dropped. I stopped the render, looked online and was told restarting my computer might help. I restarted and tried to render this time in Quicktime, I got about 345 hours this time. Also I was only using 11% of 11.9gb of RAM according to AE.
The video does not have that many effects in it at all. It is simply 3D text tracked to an object for about 7 seconds. I also just need the intro to render so I can put it back together in Vegas 12. Everytime it does render I end up with the same exact video with no effects.
This is what I'm seeing right now: http://gyazo.com/f5fcc73636171c8213451288a507c2ae 14 hours to render a 10 second clip with only some 3D text. about 300 frames.

Thanks for posting the screenshots. It really helps with assessing your problem.
You say "just some 3D text" but I presume this is extruded 3D text using the Ray Traced render option in After Effects.
Unfortunately, your AMD display card does not allow GPU acceleration of After Effects Ray Traced rendering, with the result that you will see ridiculous render times like those you are seeing. The AE Ray Traced render engine is extremely slow without exactly the right display card - see the System Requirements here.
If you are using AE CC you may wish to explore the Cinema 4D integration with AE.
Otherwise, you can fake 3D extrusion by manually building a stack of identical layers in a precomp, or using a script that does the stacking for you.
You can also try third party 3D plugins like Zaxwerks 3D Invigorator, or Video Copilot Element 3D.

Need help with a lyrics video

Ok so I am having a problem with a lyrics video I am making, my very first. I have looked up camera tutorials on youtube and still can not solve the problem. It is very hard for me to explain it in text so I made this short video in which I explain the problem, please if you have the time watch it and maybe you can tell me what is the problem

Your video shows the problem but not much of how you are rigging your camera. I think you have made the camera moves much too complicated. It's always best to think of the AE camera as if it were a real camera on a stage. Think of your 3D layers as actors. If it is easier to move the actors than the camera then move the actors. You have created a very complex 3D set where the camera must fly up and over and around in a large arc. I would have just put a 3D null in the center of the text layers, made it the parent, then animated the null. Any camera moves would have been a simple dolly in and out or a short truck right and left.
If you want to keep the current setup and figure out what is going on with the camera then open up multiple views so you can see what is going on with the camera moves. I've never used SureTarget so I don't know how it functions but I suspect that something like gimbal lock is happening or your orientation is being fouled up because the camera is going over the top and then ending up upside down on the other side of the text layers.

Help with css3 rollover tag please

Hey guys I'm stumped and need help with positioning some big picture buttons.
Here is the link o the home page http://ceramic-planet2.businesscatalyst.com/
As u can see I have four picture buttons using css3 roller but I want all four buttons next to each other
2 buttons next to each other with the next 2 directly below .
Now orgininally I used the dreamweaver rollover button and everything was inline so flowed across the page no problem. These are divs and I've tried to make 2 panels side by side among other hings but I'm not getting there so I thought one of u clever guys would have no problems telling me what to do.
Please help I'm not getting the inline or absolute placement right
Dave

Hey Dave,
You need to remove the margin from #mosaicbutton, #kitchenbutton
and then add float : left; to #bathroombutton, #floorbutton, #mosaicbutton, #kitchenbutton,
That'll get you buttons sitting the way you want them, you may need to play with the margins after that.
Pat

Some help with the 10g install, please.

Hi,
We want to install 10g, we are currently running 9i. We want to do this in silent mode since we have so many databases to move to 10g. We've got a few questions & concerns about the procedures that are supposed to be done.
If someone could kindly read over some of our concerns, we'd appreciate it.
First, we used the -record method to create a response file. How much do we have to manually edit that file once Oracle creates it for us? Or is it ready to go after we exit the OUI.
When we tried to do the install, it said it successfully installed 10g, but it failed on some of the configuration assistants. Do we need to run all of the configuration assistants? I mean, TNS is already configured. Does it change for the 10g install?
Additionally, once the 10g software is complete, the environment is still set to 9i. How does that get changed for the silent install to continue with the DBUA? I mean, we do have databases that need upgrading.
Any help with steps would be very helpful to us. We're getting error messages like this:
The installation of Oracle Database 10g was successful, but some
optional configuration assistants failed, were cancelled or skipped.
Please check
'/ora2/app/oracle/oraInventory/logs/silentInstall2006-10-26_01-26-39PM.log'
for more details.
UnsatisfiedLinkError exception loading native library: njni10
java.lang.UnsatisfiedLinkError: jniGetOracleHome
at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
at oracle.net.ca.NetCA.main(Unknown Source)
Oracle Net Services configuration failed. The exit code is -1
Thank you in advance for your help.

Hi,
You are installing in same ORACLE_HOME?
Your Operation System is UNIX?
Eder

Help with my final video please

Similar Messages

Maybe you are looking for