Help with my new u410 touch

Hi, well first of all I'm very happy with my new laptop, saddly I don't noticed that I bought it with 4gb of RAM. According to many people, if I add more RAM it will void my warranty, is there anyway I can avoid that from happening? My laptop haves 24gb of ssd and I am curious if I can upgrade it and if you recommend it.
Another question but I think this one is pretty stupid, but anyways... Is the NVIDIA 710m soldered to the motherboard or can it be upgradeable?
Thanks a lot for your help, I worked very hard and this is my first laptop .

supahdog wrote:
Hi, well first of all I'm very happy with my new laptop, saddly I don't noticed that I bought it with 4gb of RAM. According to many people, if I add more RAM it will void my warranty, is there anyway I can avoid that from happening? My laptop haves 24gb of ssd and I am curious if I can upgrade it and if you recommend it.
Another question but I think this one is pretty stupid, but anyways... Is the NVIDIA 710m soldered to the motherboard or can it be upgradeable?
Thanks a lot for your help, I worked very hard and this is my first laptop .
The ssd is used for caching. Advising you to temporarily defer the upgrade until such time that you have all the info needed to do it.
The ram is different. To add more ram refer to page 72 of the hardware maintenance manual of your unit.
Pertaining to the GPU, it is soldered on the board. It is non-upgradable.

Similar Messages

Help with my new ipod touch

hello
i seem to be having an issue with my new ipod touch i just replaced my ipod 3rd gen nano with the nano all the songs from an album played together then moved on to the next i cannot get the touch to do the same it lists all the songs in a perticular album on cover flow but when i return it to an upright position a
it lists all my songs in alphabetical order and not grouped together as an album should be i have tried on itunes using the get info and listing them all as a compalation but which works as it groups them all together in cover flow but wont work when i press album in the vertical mode

Whilst upright, switch from 'playlist' mode (bottom of the screen) to artist, touch the artist name in the list, below the 'All Songs' option all your albums by any particular artist/group should be listed so long as your MP3s are tagged properly.

Will a ipod nano charger work with a new ipod touch?

will a ipod nano charger work with a new ipod touch?

If you want to charge a touch gen 4 or less, then absolutly (It just might take a little longer than one specifically for the touch, because of watt dierences I think). I'm not sure about gen 5

Need a little Help with my new xfi titanium

+Need a little Help with my new xfi titanium< A few questions here.
st question? Im using opt out port on the xfi ti. card and using digital li've on a windows 7 64 bit system,? I would like to know why when i use 5. or 7. and i check to make sure each speakear is working the rear speakers wont sound off but the sr and sl will in replace of the rear speakers. I did a test tone on my sony amp and the speaker are wired correctly becasue the rear speakers and the surrond? left and right sound off when they suppose too. Also when i try to click on? the sl and sr in the sound blaster control panel they dont work but if i click on the rear speakers in the control panel the sl and sr sound off. Do anyone know how i can fix this? So i would like to know why my sl and sr act like rears when they are not?
2nd question? How do i control the volume from my keyboard or from windows period when using opt out i was able to do so with my on board? sound max audio using spidf? Now i can only control the audio using the sony receiver.
Thank you for any help..

/Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard.

Will Apple Pay work with a new iPod Touch

Will Apple Pay work with a new iPod Touch?

No. Only the iPhone 6 and iPhone 6 Plus have the necessary hardware chip (called NFC) to use Pay.

HT1349 which Sound Dock Music System will work best with my new iPod Touch 5th genertion

Which Sound Dock Music System will work best with my new iPod Touch 16GB 5th generation ?
I have been reading on line about how many don't. So what does. This was one of the main reasons I bought it. Will it work in one of the Bose Sound Dock Systems ?

paula393 wrote:
There will be no problems connecting. I am hearing that there are connection problems with the5th generation iPod Touch to the Sound Docks. As well, which systems will produce the best sound?
I have heard of no such problems with connection.
Regarding sound, it's simply a matter personal preference. My suggestion is to go to the nearest Apple Store and try out a couple. Each of the products at the store have passed an extensive vetting process. The Specialists are willing to work with you and may even open a box or two. Don't be unreasonable and expect to spend a half-day opening all the different models. In other words, don't abuse their willingness to provide stellar customer service.
Better yet, direct your eyballs to the store shelf or the Apple website. That's really all you need to know.

How do get the free apps such as pages numbers etc which come with my new iPod touch

How do I get my free apps which come with my new iPod touch such as pages, numbers etc

Just go to the App store and try to purchase them They should be free if:
GarageBand is free on the App Store for all iOS 7 compatible devices; additional GarageBand instruments and sounds are available with an in-app purchase. iPhoto, iMovie, Pages, Numbers, and Keynote are free on the App Store for qualifying iOS 7 compatible devices activated on or after September 1, 2013. See www.apple.com/ios/whats-new/ for iOS 7 compatible devices. Downloading apps requires an Apple ID.
copied from http://www.apple.com/ipod-touch/specs.html

When will there be any alarm clock docks compadable with the new iPod touch 5G?

When will there be any docks that can be used with the new ipod touch 5g?

Specifically, one of these
One of these adopters/cables should work:
http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=45
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=45

Problems with the new Zen Touch Firmw

I'm getting the opposite of the problems other users I read about have with the new firmware: I DON'T want to use MediaSource further but my computer doesn't recognise my Zen Touch as an external hard disk (or Audio Player or anything else I can just drag and drop my music). MediaPlayer is recognising it and on my fathers computer it aso worked.
What should also be said: Right after installing the new firmware it worked but one day later my computer denied doing the same thing as the day before...
I'm quite desperate and I hope you can help me soon.

somebody help me.....just doaloading the latest zen touch firmware and Bang....computer crashed, and the fimware that was on the zen deleted...now i can't update no kind of firmware...sys the there?s no device, but in my computer says that exists one zen...

Brand new iPod touch, won't regognize on my mac book pro please help!, brand new iPod touch, won't regognize on my mac book pro please help!

I recently bought I new iPod Touch 32gb, and It won't regognize on my computer (Mac Book Pro) I had the same problem with my previous touch but I shrugged it off as old age. any suggestions on what to do?

Well since it has not been charging on multiple computers i would take a look at replacing the usb cable. Something could not be connecting right or just needs to be replaced. If this has already been done it is starting to sound like a battery issue with the ipod.
Hope this helps!!

Hello everyone, hoping for some help with my new Apple Cinema Display 20"

Hi everyone, I bought an Apple Cinema Display 20 inch LCD monitor, just about 3 weeks ago. I have two issues I am hoping to get some help with.
1) I am using the screen on a PC with Windows XP, and I was very disappointed at the lack of PC support. I have no on screen display (OSD), so I can't see what percentage I have my brightness set to, and I can't alter the colour or contrast of the display, etc. Luckily it defaulted to very good settings, but I would really like to be able to use the (fan made?) program called "WinACD". If I would be best asking somewhere else, please direct me there. If not, my problem is that I installed it added the "Controls" tab, but it just says, Virtual Control Panel "None Present". I have tried googling for an answer, and I have seen many suggestions, but none of them worked. I installed the WinACD driver without my USB lead plugged in, and someone said that was important. So I have tried uninstalling, rebooting, then reinstalling it again with the USB plugged in, and a device plugged in to my monitor to be sure. It didn't seem to help. I have actually done this process a few times, just to be sure. So I would really like to get that working if possible.
2) I am disappointed at the uniformity of the colour on the display. I have seen other people mention this (again, after a google search), and that someone seemed to think it is just an issue we have to deal with, with this generation of LCD monitors. Before I bought this screen, I had an NEC (20wgx2), and it had a very similar issue. Most of the time, you cannot see any problem at all, but if you display an entire screen with a dark (none prime) colour, like a dark blue green colour, you can see areas where it is slightly darker than others. It was more defined on the NEC screen, and that is why I returned it. I now bought this Apple Cinema Display, because it was the only good alternative to the NEC. (It has an 8bit S-IPS / AS-IPS panel, which was important to me). But the problem exists in this screen too. It isn't as bad thankfully, but it still exists... I have actually tried a third monitor just to be sure, and the problem existed very slightly in that one, so I think I am probably quite sensitive in that I can detect it.
It is most noticable to me, because I do everything on this PC. I work, I watch films, and I play games. 99% of the time, I cannot see this problem. But in some games (especially one)... the problem is quite noticeable. When you pan the view around, my eyes are drawn to the slight areas on my screen which are darker, and it ruins my enjoyment. To confirm it wasn't just the game, like I said, I can use a program to make the entire screen display one solid colour, and if you pick the right type of colour (anything that isn't a bright primary colour), I can see the problem - albeit fairly faintly.
I am pretty positive that it is not my graphics card or any other component of my PC, by the way, because everything is brand new and working perfectly, and the graphics card specifically, I have upgraded and yet the problem remains - even on the new card. Also, the areas that are darker, are different on this screen than on the other screens I have used.
So basically, I would like to register my disappointment at the lack of perfect uniformity on a screen which cost me £400 (over double what most 20 inch LCD screens cost), and I would like to know if anybody could possibly suggest a way to fix it?
It is upsetting, becuase although this problem exists on other screens too, this is, as far as I know, the most expensive 20" LCD monitor available today, and uses the best technology available too.
p.s. If anyone would like to use the program that lets you set your entire PC screen a specific colour, it is called "Dead Pixel Buddy", and it is a free piece of software, made by somebody to check for dead pixels. But I found it useful for other things too, including looking at how uniform the colour of the screen is. That's not to say I was specifically looking for this problem by the way... the problem cought my eye.
Thanks in advance!
Message was edited by: telelove

I've been talking about this on another forum too, and I made some pictures in photoshop to describe the problem. Here is what I posted on the other forum:
Yes, "brightness uniformity" definitely seems to be the best description of my issue.
Basically it just seems like there are very faint lines down the screen, that are slightly darker than the other areas on the screen. They aren't defined lines, and they aren't in a pattern. It's just slight areas that are darker, and the areas seem like narrow bands/lines. Usually you can't see it, but in some cases, it is quite noticeable. It is mainly when I'm playing a game. The slightly darker areas are not visible, and then when the image moves (because I am turning in a car, or turning a plane, or turning in a shooter etc.) the image moves, but these slightly darker areas stay still, and that makes them really stand out.
As for how it looks, I tried to make an example in photoshop:
Original Image:
http://img340.imageshack.us/img340/3045/td1ja9.jpg
Then imagine turning the car around a bend, and then it looks like this:
http://img266.imageshack.us/img266/959/td2hq7.jpg
It's those lines in the clouds. If you can tab between the two images, you can see the difference easily. Imagine seeing those lines appear, every single time you move in a game. (I haven't tested this in movies yet, but I am assuming it's the same).
It isn't very clear on a static image. But when the image moves, the darker areas stay in the same place and it draws your eyes towards them. It isn't terrible, but it is annoying, especially consider how much this screen cost.
Message was edited by: telelove

Please help with a new dual purpose PC build

Hi everybody in AdobeLand!
I've been reading various boards and hardware sites and have started piecing together a dual purpose computer system. It will be used for both video editing (of pre-shot hacked, high bitrate I-Frame Panasonic GH2 DSLR and camcorder footage using the AVCHD codec @ 1080p 24 and 30 fps) and webcasting/streaming purposes. I would build two computers for each task, but it's just not in the budget right now. I'm already stretching things as is.
I'm still not sure if I will be using Adobe Premiere or Sony Vegas Pro 12 yet, though it seems like they organize their folders and file structures about the same. Adobe's cloud service has me a bit scared off right now. This new scheme feels like they have their hand purpetually in your wallet, which does not sit well with me. I may still go with Vegas 12 just to avoid that hassle right now. Help guide me here, experts! Telestream's Wirecast is being used for multi-cam switching and graphics for live and pre-recorded material being compressed and streamed.
Back on topic:
Here's the build as of right now...
OS: Windows 7 64-Bit Professional (Windows 8 absolutely sucks!)
CPU: Intel i7-4930k 6-Core Ivy Bridge (own)
Motherboard: Asus P9X79 Pro (own)
Memory: Crucial Ballistix 1.35v Sport DDR3L @ 32 GB (own)
GPU: EVGA GTX 770 FTW w/ 4 GB (will buy another HD monitor at a later date, hence the 4GB memory)
Case: Fractal Design XL R2 Full Tower
CPU Cooling: Noctua NH-D14 w/ SE2011 Bracket
PSU: Corsair RM1000 Quiet Series / 80 Plus Gold / 1000 Watts
Monitor: Dell U2412M Ultrasharp 24 inch / 1920x1200
Optical Drive: LG Blu-ray Writer
Keyboard: Microsoft 4000 Ergonomic
HDMI capture cards: Blackmagic Designs Decklink Mini (x2)
Storage:
I bought two Samsung 840 Pro SSD drives: one 128 GB and one 256 GB
Thinking about possibly 2 (maybe 3-4 if I really stretch) Seagate ST3000DM001 3TB HDD's.
I could sure use your help with any advise on arranging the storage to get the best bang vs. buck in speed and storage utilization (Wirecast can be setup to record live webcast sessions at 720p or 1080p in compressed files... probably no more than 120 minute webcasts... so that comes into play as well). Just don't have the funds for an uber-expensive RAID controller card right now.
Any opinions overall on the parts for the current build? I still have time to send back and exchange anything already purchased.
Thank you for your time and consideration.

What do you not understand from:
With all the reading and writing going on, on the boot disk, it is understandable you need a (number of) dedicated disk(s) for video editing, especially with the bandwidths required when the clip duration is short and the number of tracks exceeds one and uses a codec more complex than DV. The kind of files used during editing are, in order of their need for speed:
Media cache & Media cache database files, created on importing media into a project. They contain indexed, conformed audio and peak files for waveform display.
Typically small files, but lots of them, so in the end they still occupy lots of disk space.
Preview (rendered) files, created when the time-line is rendered for preview purposes, the red bar turned to green. Read all the time when previewing the time-line.
Project files, including project auto-save files, that are constantly being read and saved as auto-save files and written when saving your edits.
Media files, the original video material ingested from tape or card based cameras. Typically long files, only used for reading, since PR is a non-destructive editor.
Export files, created when the time-line is exported to its final delivery format. These files are typically only written once and often vary in size from several hundred KB to tens of GB.
When you are doubting which category of files to put on which kind of disk, especially when using both SSD's and HDD's, keep in mind that the speed advantage of SSD's over HDD's is most noteworthy with the Media cache & Media cache database. These files are frequently accessed, are small and there are many, so reducing latency and seek times and increasing transfer rates pays off by putting these on a SSD, rather than on a HDD, even if it is a raid0. Export files can go to the slowest volume on your system, since you only export once. To help you decide, I have added priority rank-numbers for speed, with 1 for the fastest volume and 5 for the least speed-demanding category.
and
Well, in the benchmark tests we have not seen any noticeable difference between SSD and HDD in terms of performance, but logic dictates that there should be a small difference in performance when the volume used for media cache is a SSD, because of the much faster access time and lower latency compared to a conventional disk. If it is noticeable, it is specifically on this volume with the media cache and media cache database, due to the large amount of small files that need to be accessed and written. This argument does not apply to the media volume with a limited number of files, that are very big in size.

I am very disappointed with the new ipod touch

So apple adds all of this new stuff to the iphone 4s, dual core a5 chip, all new 8MP camera and optics, and siri. Yay, every iphone customer is happy. This is what you added to the new ipod touch, wait its not new, its the 4th generation with the option of having it in white. Whoop-de-do, you added white to it, besides that you didn't add anything new to it. You have pretty much ditched the ipod touch in my opinion. You have greatly disappointed me apple...

What I would really like to see in the next gen Touch is 3G or 4G wireless.
Refillable usage, just like the iPad. Don't want the "contract" requirements
of iPhone. Even if you do by an unlocked iPhone, you can only get
2 year contract service for data, oh yeah and have to get voice as well.
I just want wireless data access in my pocket, and the Touch with 3G/4G
would fit that bill nicely!

Need some Help with the new Genius Mixes on iTunes 9

I would like to know how to use the New Genius Mixes on iTunes 9. I don't quit know how to use it yet and like all of us we're all just learning how to use the Genius Mixes. I did watch the KeyNote but they didn't go into great detail on how to use it. Does Apple have a web site that has more detail instruction on how to use the genius Mixes? I did find some info. on how to use the Genius mixes but it didn't go into great detail on how or what to do with the genius Mixex and thats what I need.
when I click on the genius Mixes icon under the "Genius", what shows up is a Big square with four album images of my music that I have in my music collection, I go and roll my mouse over the Big square with my four music albums and click on it to play the music and it'll play what ever I have in the Genius Mix list plus as I roll my mouse over the Big Square, under it it says "Jazz Mix" with some text writings under the Jazz mix.
I want to change the Jazz mix Title and I want to know how to add more music square boxes to my Genius Mixes just like they show in the Keynote and I would like to edit and create my own four square music boxes in my Genius Mixes.
I never used my music genius list, I always created just a play List, now I am just learning how to use this music Genius lists and I don't know how to use it at all and I need someone that knows how to use thr Genius Mixes list to help me how to use it since there isn't a how to book yet for the new iTunes 9.
Can someone Please help me with the new genius Mixes on iTunes.
Thank you,
Mrs Trisha Foster

Today, I was getting an array out of bounds exception on a split
I don't see how that could happen with the 'split' method since it creates its own array.
For this particular string, ordSplit.length = 24 and commas = 26.
PERFECT! That is exactly what it should be!
Look closely at the end of the sample string you posted and you will see that it has trailing empty strings at the end: '1096200000000242505,,,'
Then if you read the Javadocs for the 'split' method you will find that those will NOT be included in the resulting array:
http://docs.oracle.com/javase/6/docs/api/java/lang/String.html#split(java.lang.String)
split
public String[] split(String regex)
Splits this string around matches of the given regular expression. This method works as if by invoking the two-argument split method with the given expression and a limit argument of zero. Trailing empty strings are therefore not included in the resulting array.
Just a hunch but your 'out of bounds exception' is likely due to your code assuming that there will be 26 entries in the array and there are really only 24.

With the new ipod touch nano, can you download apps?

Can you download apps with the new touch ipod nano?

Nope, apps are made for iPod touch, iPhone and iPad only.
The iPod nano is basically just for people who love listening to music while exercising

Help with my new u410 touch

Similar Messages

Maybe you are looking for