Help with my nokia n95 please.

Hi all.
I am with 3g network, i had a free upgrade a few months ago, did not like the mobile they sent me ( nokia 6288 ).
So i bought a brand new nokia n95 from ebay, locked to vodafone network.
I had it unlocked saturday and put my 3g sim card in it.
The phone is working, but i could not send picture messages or brow,s the web.
I managed to sort those 2 probs out with the help of the nokia website, had to download 2 codes for my phone.
does anyone know how i can get my gps to work with the 3g network ?.
I did phone my network provider, and was told it will not work, becouse my n95 needs to be locked to the 3g network.
Can anyone help me please.
Regards
Ken.

Hi kenbo
Although "voice navigation" requires purchasing a license, GPS feature is not network dependent. You can however have a free "3 day trial"
Firstly if you are using v12.0.013 software on your N95 it is a lot quicker to obtain fix with A-GPS feature, although an active connection via WLAN or Network is needed.
Go outside away from buildings and tress with clear view of sky. Open slider and hold phone at 45degrees, don't cover "#" key as GPS antenna beneath it. Low cloud or rain will make satellite acquisition a lot longer.
If you go to Menu > Tools > GPS data > (searching for + calculating data) > Position > Options > Satellite status
This shows any number of satellites up to five - empty rectangle = not locked on - black filled rectangle = signal acquired; you need a minimum of 3 solid bars for lock-on and triangulation to work!
Depending upon which version of Nokia Maps is installed on your N95 you may either have satellite icon bottom right of your screen or satellite icon with three yellow or green lights.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Hi i need help with my nokia e63 can someone pleas...

i need help with my nokia e63 all the images on the web have really small when they used to be regular size and it has nothing to do with the zooming settings. someone please help.

Cannot send or received email
http://www.apple.com/support/ipad/mail/

Please Help!! Nokia N95 Camera Problems!!!

Hi,
I recently upgraded my Nokia N95 Firmware to the newest one available, and since then, my camara has stop working. When i open the shutter and then then software loads the screen is just black, i cant click options or anything cause it dosent work. But if i take a picture by clicking the camara button it takes a picture .
I have tryed everything by resetting, re-installing the firmware.
Is there a way i can downgrade my firmware??
Please help
Thanks
Jonathan

It isn't possible for you to roll back the firmware update. You could try asking your local Nokia Care Point if they will do it for you.
Have you tried the 3 finger hard reset?
You can find your nearest Nokia Care Point at:
For UK
http://www.nokia.co.uk/A4228006
For Europe:
http://europe.nokia.com/A4388379
For Asia-Pacific
http://www.nokia-asia.com/A4416070
Elsewhere:
http://www.nokia.com select your country, go to the support section, then select repair.

Need help with the Nokia N8 or I need to send it b...

I purchased a new N8 from Amazon and I have had nothing but issues. It has been very disappointing and I need to know if it the new firmware will fix any of these or not.
1. Once a day, while I am on a call, the phone says "insert a SIM card" and then reboots. I have to then turn off (after the reboot), release and reinsert the SIM card and restart. This works about 75% of the time. I have seen this issue reported on here but not answers.
2. Accuwearther widget stopped working. I called accuweather and they said:
Thank you for making AccuWeather.com your source of weather information on the go! We are aware that the widget will get stuck in a ?Loading...? mode which does not allow you to view the weather. We have contacted Nokia and have been informed that the application is not having an issue but there is a bug within the phone build that is causing this message. While we regret to inform you that we do not have a timeline from Nokia when to expect this fix,....
Is there a fix coming?
3. You cannot manually setup an IMAP Gmail account. The wizard forces you into the default POP3 and then my mail is not synced. I have tried MfE but then HTML does not work correctly.Any chance this can be fixed.
4. I cannot use data and voice at the same time. During the long drive today, I tried a to navigate while on a conference call. It says "cannot find connection". I had to end the call, update the maps and then redo the call "10 TIMES". I know AT&T supports this because my E71 works fine. What happened to this feature.
5. The GPS is funky. I walked to a local tavern using the maps. When I got inside, I tried to update my location on Facebook for my friends to find me, but it kept saying that I was 4 blocks away. I thought the GPS/aGPS would be better.
6. There are only two social networks I can update. **bleep**?
7. WfE keeps failing on replies.
8. I cannot get out of "Battery Save Mode" I have released it about 20 times and it still asks me if I want to get out (this could be the data/voice problem above).
I have switched back to the E71 and am going to send this back to Amazon unless there is a major update on the way.
I don't mean to rant but as far as quality, this is terrible. Shame on you Nokia. Here is your chance to at least gain back some customers and you put this in the field.
Don

Ok, I have to say I was really impressed by the effort. Nokia Support (in The Philippines) called me 4 times over the last 2 days to help with my phone.
Here is there responses have put them in order of my questions.
1. I am to reinstall the operating system on the phone. They said that this is the most likely (but not confirmed) fix to the SIM card problem (although they would not confirm it was a problem with the phone).
2. No answer because we did not get that far.
3. To setup a gmail IMAP account you MUST us Nokia messaging. Period. Since I have security concerns, that is out of the question.
4. This is the big one that stopped it. The Nokia N8 is a Class B cell phone meaning that you cannot use data and voice at the same time. They told me that all Nokia phones were Class B, but I told them my E71 is not. After research, I found that the E71 and E72 is Class A (Can do voice and data at the same time) and that the N8 is Class B. Here is an article explaining the difference. This was a deal breaker. I cannot access the internet while I am on a call. Reminds me of a dial up modem.
5. Reinstall the software and it might fix it.
6. No answer.
7. Use Nokia Messaging.
8. Reinstall the software and it might fix it.
So, I am sending the phone back because I cannot use it. I cannot imagine a smart phone on the market that cannot do internet and voice at the same time.
Too bad.The N8 is a terrific camera and you should buy it for that, but look elsewhere for a smartphone.
Thanks to all that read and helped.
Don

Need some help with the colour profile please. Urgent! Thanks

Dear all, I need help with the colour profile of my photoshop CS6.
I've taken a photo with my Canon DSLR. When I opened the raw with ACDSee, the colour looks perfectly ok.
So I go ahead and open in photoshop. I did nothing to the photo. It still looks ok
Then I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
And the colour started to get messed up.
And the output is a total diasater
Put the above photo side by side with the raw, the red has became crimson!!
So I tried the other option, Use the embedded profile
The whole picture turns yellowish in Photoshop's interface
And the output is just the same as the third option.
Could someone please guide me how to fix this? Thank you.

I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
always use the embedded profile when opening tagged images in Photoshop - at that point Photoshop will convert the source colors over to your monitor space correctly
if your colors are wrong at that point either your monitor profile is off, or your source colors are not what you think they are - if other apps are displaying correctly you most likely have either a defective monitor profile or source profile issues
windows calibrate link:
http://windows.microsoft.com/en-US/windows7/Calibrate-your-display
for Photoshop to work properly, i recall you want to have "use my settings for this device" checked in Color Management> Device tab
you may want to download the PDI reference image to check your monitor and print workflows
and complete five easy steps to profile enlightenment in Photoshop
with your settings, monitor profile and source profiles sorted out it should be pretty easy to pinpoint the problem...

Need help with threads?.. please check my approach!!

Hello frnds,
I am trying to write a program.. who monitors my external tool.. please check my way of doing it.. as whenever i write programs having thread.. i end up goosy.. :(
first let me tell.. what I want from program.. I have to start an external tool.. on separate thread.. (as it takes some time).. then it takes some arguments(3 arguments).. from file.. so i read the file.. and have to run tool.. continously.. until there are arguments left.. in file.. or.. user has stopped it by pressing STOP button..
I have to put a marker in file too.. so that.. if program started again.. file is read from marker postion.. !!
Hope I make clear.. what am trying to do!!
My approach is like..
1. Have two buttons.. START and STOP on Frame..
START--> pressed
2. check marker("$" sign.. placed in beginning of file during start).. on file..
     read File from marker.. got 3 arg.. pass it to tool.. and run it.. (on separate thread).. put marker.. (for next reading)
     Step 2.. continously..
3. STOP--> pressed
     until last thread.. stops.. keep running the tool.. and when last thread stops.. stop reading any more arguments..
Question is:
1. Should i read file again and again.. ?.. or read it once after "$" sign.. store data in array.. and once stopped pressed.. read file again.. and put marker ("$" sign) at last read line..
2. how should i know when my thread has stopped.. so I start tool again??.. am totally confused.. !!
please modify my approach.. if u find anything odd..
Thanks a lot in advance
gervini

Hello,
I have no experience with threads or with having more than run "program" in a single java file. All my java files have the same structure. This master.java looks something like this:
---master.java---------------------------------------------------
import java.sql.*;
import...
public class Master {
public static void main(String args []) throws SQLException, IOException {
//create connection pool here
while (true) { // start loop here (each loop takes about five minutes)
// set values of variables
// select a slave process to run (from a list of slave programs)
execute selected slave program
// check for loop exit value
} // end while loop
System.out.println("Program Complete");
} catch (Exception e) {
System.out.println("Error: " + e);
} finally {
if (rSet1 != null)
try { rSet1.close(); } catch( SQLException ignore ) { /* ignored */ }
connection.close();
-------end master.java--------------------------------------------------------
This master.java program will run continuously for days or weeks, each time through the loop starting another slave process which runs for five minutes to up to an hour, which means there may be ten to twenty of these slave processes running simultaneously.
I believe threads is the best way to do this, but I don't know where to locate these slave programs: either inside the master.java program or separate slave.java files? I will need help with either method.
Your help is greatly appreciated. Thank you.
Logan

HELP!! Nokia N95 restarting !! and more!!

Okay
im now on my 3rd Nokia N95 from the 02 network
the first 2 handsets had high pitch whining noise and awful sliders which were wobbling on the right hand side, appaulling workmanship, i dont even know how they were allowed to leave the Nokia Factory like this!
maybe the workers were all drunk or something?
it isnt only me thats complained of these faults, check all the other forums about the N95!
anyway, my 3rd handset has been working ok
(or so i thought)
everything was working fine, no wobbly slider, no whiny noise..
but about 3 - 4 times per day as of 3 days ago, the phone just restarts itself when its just sat there!!!
WHY DOES THIS KEEP HAPPENING ?
have i now got to sent this **bleep** handset back aswell?
i dont want to drive 20 miles to nearest Nokia Service Centre, WHY should i ????
i also left my house this morning at 5.30am to take a friend to the Airport, the phone was unplugged from the Charger with full battery life, i used sat nav to get there and back, its now 9.35am and i have 2 bars left on te battery life!!
truly appauling if you ask me
will new firmware sort the resarting and battery life?
or do i have to just give up on this handset and buy another model by another Manufacturer?
im at my wits end with these N95`s
THOUGHTS?Message Edited by waynester on 17-Apr-200709:37 AM

17-Apr-200709:36 AM
waynester wrote:
i dont even know how they were allowed to leave the Nokia Factory like this!
I saw some build quality issues highlighted on a review: you'd think they'd at least check phones that were going to reviewers!
17-Apr-200709:36 AM
waynester wrote:
but about 3 - 4 times per day as of 3 days ago, the phone just restarts itself when its just sat there!!!
That's a typical problem for a newly released N-series. Unfortunately, this is only likely to be fixed by a firmware upgrade. Check you have the latest version. If you do: you're fresh out of luck .. for a while.
17-Apr-200709:36 AM
waynester wrote:
i also left my house this morning at 5.30am to take a friend to the Airport, the phone was unplugged from the Charger with full battery life, i used sat nav to get there and back, its now 9.35am and i have 2 bars left on te battery life!!
That's no surprise at all: when you use the GPS the phone is working all the time. It's kinda like you made a 4 hour (or however long the trips were) phone call. The surprise is that you have any battery left at all!
When I use my N80 for navigation, I usually have either the phone or the GPS receiver on charge virtually all the time.
It's probably no consolation right now, but most of us who bought phones soon after their release have gone through very similar teething problems and we know how hideously frustrating they are. The good news is that if you do hold out, the 2nd or 3rd firmware release normally fixes the worst of the problems and you do finally get that awesome phone you thought you'd bought.

Need help with flash player installation please !!!!

Hello,
I need help with my flash player installation because every time I access a movie this is the message I receive.
This content on Xfinity TV is not available for viewing with Chrome's "Incognito" mode. To play this video using Chrome, please view this page without "Incognito" mode.
Still having problems? Try resetting your Flash player license.

Incognito mode is a Google Chrome setting when you open a new window (Cmd+Shift+N on a Mac Ctrl+Shift+N on Windows) It opens a "private" window with no cookies and no tracking. The problem with it is that when you disable cookies, your license files are not sent to the site (whetehr it's YouTube or xFinity or any other that uses license files for paid content) and it treats you as if you're a first time visitor. Paid videos won't play wihtout the cookies sending the license file info.
This isn't a Flash Player setting. It's in Chrome. I did some research and according to Google, "Incignito" mode is off by default, and can ONLY be activate by the keyboard shortcut. There IS a way to disable it from the registry http://dev.chromium.org/administrators/policy-list-3#IncognitoModeAvailability

I need help with a NOKIA 7370!!!

Hello! Please help with this problem. The display is crashed and I need to forward a message that i have recieved on my phone. can someone plese guide me step by step to do this. someting like go to the menu....message......to the message you want to forward...and how many spaces do i go down to select the option forward message ...and type the number i want to send it to?
I need someone with the same phone to guide me through the keystrokes .
Thank you!

Yes, I belive you have good reasons to ask me this question
The fact is that I just got the phone and he SIM card that it is inside.And nobody know the number I never used it. And I sent a message on it with some information I really need to know hat it is written down somewhere. Unfortunately the phone is broken and can`t see it anymore.It is the only message I have.
Well anyway if there is anyone who can help me please do! I know it will take some time to guide me step by step but it would really help me!
Thank you!

Help with css3 rollover tag please

Hey guys I'm stumped and need help with positioning some big picture buttons.
Here is the link o the home page http://ceramic-planet2.businesscatalyst.com/
As u can see I have four picture buttons using css3 roller but I want all four buttons next to each other
2 buttons next to each other with the next 2 directly below .
Now orgininally I used the dreamweaver rollover button and everything was inline so flowed across the page no problem. These are divs and I've tried to make 2 panels side by side among other hings but I'm not getting there so I thought one of u clever guys would have no problems telling me what to do.
Please help I'm not getting the inline or absolute placement right
Dave

Hey Dave,
You need to remove the margin from #mosaicbutton, #kitchenbutton
and then add float : left; to #bathroombutton, #floorbutton, #mosaicbutton, #kitchenbutton,
That'll get you buttons sitting the way you want them, you may need to play with the margins after that.
Pat

I need good advices for a Nokia N95 please...

I'm going to buy a Nokia N95 from a GSM Store near me and I wish to check first if the phone it's original. I know that there are some things I must check ( The star *, the seventh and eighth digit from IMEI, the size of the camera, if there is written Nseries on the back of the phone,under the Nokia logo) but anything else I don't know....so is there anything that I can check which is only, and only for Nokia original phones....something that the replicas don't have? I'm asking this because I deeply want not to get hoaxed.
Thank you so much for your help,
David

look carefully under the battery where it was make if its not Hungary or Finland it might be fake...
look at the menu and touch the landscape menu and there you can see if it works good or its a fake..I had an N95 and it was made in finland at everything was ok it was original but before i bought it I payed attention at battery, production country, camera settings and qualitty, the slide and the quality of screen..If its fake you can observe pixels on the screen faster then at the original phone...
I hope this would help you

Some help with the 10g install, please.

Hi,
We want to install 10g, we are currently running 9i. We want to do this in silent mode since we have so many databases to move to 10g. We've got a few questions & concerns about the procedures that are supposed to be done.
If someone could kindly read over some of our concerns, we'd appreciate it.
First, we used the -record method to create a response file. How much do we have to manually edit that file once Oracle creates it for us? Or is it ready to go after we exit the OUI.
When we tried to do the install, it said it successfully installed 10g, but it failed on some of the configuration assistants. Do we need to run all of the configuration assistants? I mean, TNS is already configured. Does it change for the 10g install?
Additionally, once the 10g software is complete, the environment is still set to 9i. How does that get changed for the silent install to continue with the DBUA? I mean, we do have databases that need upgrading.
Any help with steps would be very helpful to us. We're getting error messages like this:
The installation of Oracle Database 10g was successful, but some
optional configuration assistants failed, were cancelled or skipped.
Please check
'/ora2/app/oracle/oraInventory/logs/silentInstall2006-10-26_01-26-39PM.log'
for more details.
UnsatisfiedLinkError exception loading native library: njni10
java.lang.UnsatisfiedLinkError: jniGetOracleHome
at oracle.net.common.NetGetEnv.getOracleHome(Unknown Source)
at oracle.net.ca.NetCA.main(Unknown Source)
Oracle Net Services configuration failed. The exit code is -1
Thank you in advance for your help.

Hi,
You are installing in same ORACLE_HOME?
Your Operation System is UNIX?
Eder

Help with Rendering/Finalizing Project Please?

Hi,
I am so new to this entire Adobe and video making that I've spent the last few hours pulling hair literally. I am hoping that some of you experts can take some time to give this novice some much needed guidance. Okay, I'm begging!
I recorded a wedding on a XHA1 MiniDV camera in 1080p 24fps. Captured the clips to PP CS4 which in turn makes them MPEG, I believe. Included in my project are addition clips imported from a Canon HF S21 also in 1080p 24fps and a Rebel T2i in ?? format. Didn't use too many clips from the rebel.
Anyhow, my project settings in PP are:
Video - Display format = Frames
Audio - Display format = Audio Samples
Capture Format = HDV
All Scratch disks are saved on to my desktop with 284 GB
Here is a picture of the sequence settings:
Again, sorry for the ignorance and stupiditiy. I am wondering what would help.
I am trying to burn it all with chapter markers and additional features to a DVD.
- What would be the BEST settings for exporting to Encore?
- Should I separate each section into a different sequence - would that help? For example, the pre-ceremony to one sequence. The ceremony to another. The reception to another. Or should I make new projects for each?
- How can I make my computer faster? Is it the memory, ram, etc? What should I do?
Right now, it has failed over and over in rendering in After Effects. It stops encoding when I export to AME. It says 158 hours for rendering in PP.
HELP!
I am using an iMac and here are computer specs (again, I am not even sure what to post to help you all help me):
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i7
Processor Speed: 2.93 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: IM112.0057.B00
SMC Version (system): 1.59f2
Here is a pic of what I'm working on. I know the pic-in-pic feature probably doesn't help with rendering time either but 158 hours is killing me. In fact, when I go to sleep, I wake up to an error message where PP has closed.

leevang,
Your computer looks great. I wouldn't be too worried about the time PP shows for encoding etc.
I have found that right when I first start to encode a project, 73 hours or 12 hours is normal. Rendering is not necessary for encoding. However when I look back later, the time has dropped greatly.
Down to 2 or 3 hours. that's when I follow Jeff B.'s suggestions when I do a 2X scan.......

I need help with the https class please.

Hello, i need add an authentication field in my GET request using HTTPS to authenticate users. I put the authentication field using the setRequestProperty method, but it doesn't appear when i print all properties using the getRequestProperties method. I wrote the following code:
try{
URL url = new URL ("https://my_url..");
URLConnection conexion;
conexion = url.openConnection();
conexion.setRequestProperty("Authorization",my_urlEncoder_string);
conexion.setRequestProperty("Host",my_loginServer);
HttpsURLConnection httpsConexion = (HttpsURLConnection) conexion;
httpsConexion.setRequestMethod("GET");
System.out.println("All properties\r\n: " + httpsConexion.getRequestProperties());
}catch ....
when i run the program it show the following text:
All properties: {Host=[my_loginServer]}
Only the Host field is added to my HttpsURLConnection. The authentication field doesnt appear in standar output. How can i add to my HttpsURLConnection an Authentication field?
thanks

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

I need help with the navigation menu please?

I have been working my way through your six part printed instructions and I am styling the header and navigation menu. The bullet points disappeared which was correct and the tabs moved to the right, as they should, but one tab sits underneath another tab and all tabs are covered up by my main heading. This is dreamweaver CS6.
It looks a bit of a mess!

I have moved this to the main Dreamweaver forum, as the other forum is intended to deal with the Getting Started video tutorial.
The best way to get help with layout problems is to upload the files to a website and post the URL in the forum. Someone can then look at the code, and identify the problem. Judging from your description, it sounds as though the Document window is narrow, which would result in the final menu tab dropping down to the next row. Try turning on Live view or previewing the page in a browser. Design view gives only an approximate idea of the final layout. Live view renders the page as it should look in a browser.

Help with my nokia n95 please.

Similar Messages

Maybe you are looking for