Help with mymuvi face cam

I won a mymuvi facecam and I love it but when I make a movie and plug it into my mac book I can see the movie and thats great but there is no sound with it can anyone help my daughters birthday is coming up and I thought this would be great to use Thanks.

It looks like the codec is XviD, you may need to download a XviD codec to process your video for the Mac. 

Similar Messages

  • Help with build in cam

    i have msi pc with build in cam
    i dont remembar wath the taip m series somthing i have cure 2 duo cpu t5750 2 gb ram 320 gb
    giforce 8400
    now i dont find any driver for the cam and the pc dos'nt know the cam....
    i run vista 32bit
    any one can halp me pleas!!!:(:(:(

    You have some notebook or? Read >>Posting Guide<<

  • Can you please help with iPhone 4 camera?

    I am running ios 7 and have been for a few months with no problems. When I went to take a photo yesterday, I clicked on the Camera icon and a black screen with a white circle came on.  I tapped the white circle (even though that's not usually what I see when I want to take a picture), and it VERY briefly clicked on but way before I could think to snap a picture, it clicked me out of Camera and back to the main screen with icons. 
    PLEASE help me figure this out!  I use my phone, like many of us, for pictures almost every day.
    Thanks in advance....Beth

    Hello,  What I do is I open Lightroom 5.3 and go to 'Help' and go to 'Check for Updates' then click on it which brings up Lightroom Update Available (see image below) and as soon as I click 'Download' I get the error as shown above (in the other image).  Hope this helps

  • Can anyone help with iPad problem- Camera roll?

    When I take a photo on my iphone, the photo goes into my photo stream and appears on my shared mac camera roll but does not appear on my ipad camera roll. However the photo does appear when you click from albums to photos. Not sure what has happened it use to go into camera roll all other devises ie iphone, ipad and mac laptop. I have gone into setting and all is ticked correclty. Can someone help please.

    In many ways, I don't think IOS 7 improved the experience with Photo app but it is what it is.  I shoot both with my Iphone and with a camera using an SD card and upload with the CC to the Ipad, so i have two different issues with Camera roll. 
    By experimentation I have found that a jpeg file MUST be in Camera Roll on the Ipad to be considered 'saved' and backed up in Icloud.  Photostream will bring your jpeg photo from the Iphone to the Ipad but it is NOT YET in your camera roll.  To have that done, by simply putting it in an album it is placed in Camera Roll.  That's the simple thing to do.  If you process it in a 3rd party app like Snapseed it will save back to your Camera Roll, so doing either of these two things places that file in Camera Roll, but no where do you get this information unfortunately. 
    For those using an SD card to import a RAW file, you need to process in a third party app, save to photo app--generally the default is as jpeg, and it will appear in the Camera Roll.   I don't shoot with my camera in jpegs so can't describe that but I'm rather assuming that if you select the file, save to an album, that it will appear in the Camera Roll.  A word to the wise--if you are importing raw files to the Ipad and processing them you will end up with two photos in the "photos", the raw and the jpeg.  To cut down on storage, delete the raw which is the one to the right of the processed jpeg file.  I do wish Photoapp would give us some EXIF data on shots but if it isn't apparent which is which, I've determined (by using apps that show the EXIF)  the processed jpeg that you ordinarily wish to keep on the Ipad is always to the left of the raw, or 'first' in the photo mode
    Another way to move from iphone to Ipad, especially video (which doesn't Photostream), is to use Air Drop and the file will automatically go into Camera Roll.
    Hope this helps.  I've had to explain this to my husband also and show him by demoing so I've been down this path before LOL.

  • Need help with 4-5 camera set up for audio/video podcast

    Hey guys. I'm overseeing the podcast/audiobook studio construction for my company's new entertainment venture. It will ultimately be my job to produce the podcasts and audiobooks. The catch is that they also want to film the podcasts as well. I'm trying to find the most affordable set up that makes the editing/conversion process easiest for me on FCPX.
    As you'll see I'm a bit all over the place. The essentials for what I'm looking for is
    1) The right Camcorder
    2) The most efficient way to record, edit and sync audio
    What is the most affordable camcorder to use that works really well with FCPX? I've been hearing rumors that some aren't compatable and require a tedious conversion process. The Kodak Zi8 seems perfect because it shoots in 1080p and has a mic input, but I'm not sure if it works well with FCPX. Now, I don't know if the mic input is necessary. I was thinking the easiest way to automatically sync audio is by plugging the 4 mics into the camera's mic input and record that way. That should sync everything up automatically right? I also watched a tutorial on the multicam editing option in Final Cut and that seems perfect for this project. Do I need a mic input if I use this method? It seems like the syncing is super easy with the built in camera audio and the podcast audio files together.
    I also would like to be able to record directly into the computer but don't know if that's possible. The process of taking 4-5 SD cards and uploading it after each shoot that way seems super tedious. I'm not sure if there is way to do that.
    Another option would be for us to buy a video switcher but all the options seem so expensive. Anybody know of good hardware that'd work? That way I could edit on the go and if we want to make this a live ustream we can do so. I was also thinking about switcher software and using MIDI. Not sure if that is possible either.

    Lets ignore whether you should be doing this, but, if they are requesting that you do it, have at it.
    Although, the simplicity of this is mind boggling, for them not to do it...ah well, you're donating for a non profit, they are probably the cheapest game in town, and lost the sole employee who could scratch their backside...
    Choice one, I dont recommend this one - File > Print booklet, 2 up saddle stitch. Flip back and forth using the Print Settings button at the bottom to orient the page layout and set paper size. Set the printer as Adobe PDF. Keep checking the Preview in the main Print Booklet dialog, I had to set a page range of 39 pages in a 40 page book for this to work last week.
    Choice two - If you have set a 44 page document with bleeds, export to pdf, toggle "Use ducument bleeds", no crops. Place those reulting pdf's in a new 11 x 17, landscape doc, with appropriate bleeds. How you defined the bleeds in the 44 page document dictates how much fiddling you will have to do at the center (fold line) of the new 11 x 17 "imposed" document. (If your 44 page was not set as facing pages, you might have defind inside bleed to zero. If it was not set as a facing pages document, it references top, bottom, left and right bleeds) (The use of pdf for this is not necessary, you could just as easily place pages from the original InDesign file as pdf's) Setting a blue line/guide line at the center would help to crop in bleeding frames.
    All above seems too simple, you are only needing to impose pages 22-23 for these steps btw.
    @Scott Falkner - I knew I was being to wordy.

  • Need Help With Motion Track/Camera Tracking

    I've been trying for several days to motion track 2 seconds worth of footage but I cannot get it. I've tried the AE motion track, 3D Camera Tracker, Mocha Pro, Camera Tracker from the Foundry, Boujou (could be user error with that though, cause I had never used it before), but I cannot get this shot figured out. Test - YouTube here is a link to the footage, I'm trying to track from frame 183-235 (where the guy is kneeling down in front of the box holding dynamite and everything is black and red)
    Any help would be great, all I want to do is have an image attached to one of the boards in the background so it doesn't move.
    Thanks!

    Wow you have boujou? Thats awesome $10k, anyway looks like mocha should be fine for this as I don't see a ton of camera movement in that shot where you want to track. Do you know how to use mocha? If not there are tuts while working on that scene. Here's a few http://cgi.tutsplus.com/articles/advanced-motion-tracking-with-mocha-ae--ae-15231 and for various tracker apps including the built in one http://cgi.tutsplus.com/articles/26-tracking-and-matchmoving-tutorials--ae-7394

  • Need help with Droid Charge camera shuting off phone

    We have two droid charge phones that we got in April on Amazon.  We are trying to troubleshoot with Samsung and getting not much help.  Phone dies quickly at times, but not other times.  It consistently shuts off when taking pictures, though, on both phones.  It is clear to us that the phone has a problem because we have two.  I've seen two work-arounds.  One is getting a bigger battery that requires a new larger phone back.  The other is to put the phone in Airplane Mode.  Apparently, this problem is due to a "power load" issue.  So, the phones are inherently defective. 
    We like the phones and at brief times we have been fooled into thinking they are working fine... because once in a while the camera works fine. We haven't had any replacement phones because it seems that so many have this issue and therefore, figured what is the point.  We would like to know if other Droid Charge cameras don't have this issue because we expect to be able to use the camera.  We have 3 little boys and we already have lost pictures from the last day of school because we counted on this phone.  Sounds like a small problem until you look at it that way. 
    Really wish Amazon, Verizon or Samsung could get us a good solution to a seemingly nice phone.

        Nolpost and smsmoot, I’m sorry to hear of the issues you are having with the phone shutting off when using the camera. This is no fun! I use my camera often and would hate for it to reboot my phone every time I use it. I can only imagine how frustrating that must be. But don’t worry guys because I’m here to help!
    How long have you guys had this issue? Does it happen every time you use the camera? Did you notice this started after the software update? If so, have you performed a hard reset http://bit.ly/w21WpW since the update?
    If you have already performed a hard reset and are still experiencing this issue, please send me a DM with your name and mobile number so I can access your account and further assist you.
    I look forward to hear from you guys.
    John B
    Follow us on Twitter @VZWSupport

  • Need help with finding "my" camera..

    I'm having difficulty finding a camera with specific features that are important for me. I would greatly appreciate any help in finding the brand and model that fits the bill. I've googled and googled, without any luck. Help!  I'm looking for a digital camera with:
    1. GPS
    2. "small" size (gotta fit in my purse, no camera bags for me!)
    3. viewfinder
    4. takes AA batteries
    TIA

    As a GPS and AA enthusiast, I too have been waiting for a similar combination.
    nuff said about GPS models like the NIkon AW100, P510, S9300 similar models using propreitary batteries.
    DSLR with AA powered grips don't fit your portability factor
    have you considered an AA powered data logger?  I use the discontinued Sony GPS-CS1.  Not only does it provide a data file to sync with my camera clock, but it also draws a breadcrumb on where I go so I can look it up on a map afterwards.

  • Faces - help with suggested face

    For some reason Aperture has decided that almost all the unnamed faces in one particularly large project are me!!! It's VERY frustrating because when I select my face and try to get the suggestions to reject them, then it shows none. However, when I go photo by photo, it asks "is this Cris" in all of them so I need to individually click x on each and name them correctly.
    Any ideas how to deal with this without having to go one by one over 2800 photos?

    I am also having this issue with Faces. I have tagged hundreds and hundreds of photos across my library, but about 95% of the time it thinks that the photos are of my friend Anthony. I have tagged a large number of pictures of him, but I have also tagged lots of images of other people too....some more than Anthonny.
    I have noticed that many of my images have double faces detected. One person in the photo and if you look carefully, there are 2 boxes around their face. I am thinking that might be where the problem has come in. I think that one of those boxes is always being used in those recommendations.

  • Help with photomering faces

    Newbie -I am using PSE 8.  When I open the photomerge face page and upload photos- the one I am to 'get face' from is always smaller and it does not work.  How can I change this???

    Ht turk35
    Since PSE9 all of the photo merge functions are devalued.
    They only work with luck, and the ability to arrange and overlap images, as in earlier versions, is now gone!

  • Need help with Nokia E5 Camera

    Hi all,
    i just bought my nokia e5 last week.
    i realized that i cannot turn off the sound when i snap pictures with the camera.
    i've gone to the settings, it only allows for changed between camera tone 1 to tone 4. No way to turn off the sound at all.
    Turned the phone to silent mode, but the camera sound remains.
    Does anyone know how i can get rid of that sound? (as it is quite irritating)
    Thanks

    You could try to disable the "warning tones" in your current profile. On some models that will silence the camera, but it can also silence java based games or apps.
    In many countries Nokia is forced to make it so that the camera sound cannot be disabled to comply with privacy laws. So if nothing works to silence it, that is the reason.

  • Help with swapping faces CS6

    I have been following tutorials on how to swap faces on a body in CS6. All goes well until the same place each time I try.  When I select the new face and try to autoblend over the old All that happens is as screen captured below.
    As you see it does not blend and empty background just gets bigger/ or  the copied face gets smaller.
    I can not work out what I am doing wrong. I hoped that somebody else might have come up against the same problem and have a suggestion for me.
    Thank you for your assistance.

    Mr Mack,  Thank you for your reply. I think I understand what you say but I
    am not sure what step I am doing wrong. This is the tutorial I follow,
    https://www.youtube.com/watch?v=t5SGw8izxMY
    I am not sure what step is wrong. My problem is I follow exactly the
    instructions but do not fully understand what I am doing. I follow and copy
    but do not understand what it is I do. Sorry for my English I hope you
    understand. Thank you for your time. If you are able maybe you can watch
    the tutorial and tell me what is wrong.
    Thank you very much Kiersten

  • Need help with HD Multi-cam editing...

    So it is my understanding that you can't view a multi-cam sequence unless the footage you are viewing is unrendered/unlimited...
    So my question is... how do I take rendered footage and de-render it so its unlimited... I tried adding an effect but even color corrector just makes the footage go from rendered to "needs render" which is no good.
    For those who understand multi-cam editing better... could you provide some pointers. Thanks!

    nvm i figured it out.

  • I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

    I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling.  I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working.  I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem. 
    My network consists of 4  base stations set up in a roaming network - same network name and passwords.  I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn.  The network works pretty well since I went to a roaming set up.  Good performance, yata, yata, yata.
    However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address.  When the AEBS is set to  bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding. 
    I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS.  I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS.  In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding.  However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode. 
    I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope.  What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
    I'd appreciate any insight into this that anyone might have.  I've hit the wall with what I know.
    Thanks.

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • Terrible customer service, and no help with defective camera

    Madams and Sirs,
    This camera (see below) was a Christmas present, and we discovered first last week that it had a manufacturing defect. (one of the small tabs holding the case half together got installed in a pinched way.)
    Best Buy has always had fantastic customer service, and we have been very happy. We have spend many thousand dollars in your store every year. So we were sure the store would have a solution.
    We took it in to your store #1423 on Curtner in San Jose to try to exchange or replace under warranty.
    I understand you sometimes you are not able to help a customer, but this email is first about the shock I got when I spoke with Megan in customer service.
    As many customers in Silicon Valley, I am an engineering manager, and we have performed destructive testing on many of our own products. The defect on this camera is obviously a manufacturing defect, and not possible to be caused by poor handling. This is very obvious.
    Megan told me with other employees as well as my son listening next to me that I was a liar, and that the damage was caused by abuse, and not a defect. I tried to explain that was not possible, and she interrupted me, and again said that i was not telling the truth, and that the assembly error was caused by us. 
    I then asked if it was possible to have the matter reviewed by the store manager, and she responded she was the store manager. 
    I left with the camera, and the matter unresolved, and had to explain to my son that I was not a liar, and that Megan must be wrong and "some people just have a bad day sometimes".
    I will not be spoken to with insults like that, and I can no longer go to your store with my kids, and if my employees treated any customer the way Megan did, I would make sure she received training to correct this. If the store manager have this attitude to customers, the entire organisation usually follows, and I will not be a customer in a store like that.
    1. Please help resolve this issue.Order number: {removed per forum guidelines}

    Hello erikev,
    Cameras are nice to have, especially with young children, so I can imagine how frustrating it can be to find yourself with a pinched casing. When something goes wrong, it’s never a fun situation, and while it may not be something we can necessarily help with, great customer service should still be provided. It sounds like this didn’t happen the way we hoped, and I’m sorry this was at your expense.
    As this situation is definitely concerning, I looked into your account to see how I might be able to assist. However, I have found your concerns have reached Terrance with our executive support team. He is currently looking into your situation and should contact you once more information is available. From here, Terrance will be your first point of contact.
    Hopefully he can find a good resolution for you,
    Alex|Social Media Specialist | Best Buy® Corporate
     Private Message

Maybe you are looking for