Help with N97
I am so confused right now with my N97.
Yesterday i was scrolling through my contacts list and noticed new numbers that i didn't recognise.
After looking into it further i noticed that these numbers were from my friends contact list and they had just appeared on mine!!!
I gave my friend my old N95 handset about 4 weeks ago.
How can this happen? He hasn't sent me the numbers. Its left me very baffled!!!
Probably somebody playing games you mate. That's been done to me before where my friends switched my contacts numbers about. I went to phone my mums, but ended up calling an old girlfriend.
check with your pal.
Hit Kudos if I Helped out.
Nokia 3310-> 8810->N95->N95 8Gb->
Nokia N97 Black v21.0.045 RM-505 Code-0585162 (handset No 3)
Similar Messages
-
I cannot update my N97.
The current firmware is V 12.0.024
I have tried everything that I know how to.
Also I cannot update or download the new Ovi Maps for my phone as well.
Please help me with this.
Solved!
Go to Solution.If you cannot update through ovisuite,nsu or ota - you will have to either wait or ask a Nokia care point if they can update it for you. - They might do it, they might not.
-
Hey guys im thinking about getting a sim free N97 but the problem i am facing is that im still in use of my iphone 3g contract and i have a long time left! So im planning on putting my iphone 3g contract sim in the N97 i wa sjust wondering if this will work? and secondly will i still get my 3g internet free on the n97? if not... how much does it cost anyway? if anyone could help me out id be very grateful
ThanksHi,
As far as im aware your contract status will work in any phone that your sim goes into. My partner broke her new phone awhile ago and even after being repaired she stuck to her previous old phone with the sim card and has then same allowance with mins etc as before
Message Edited by twobit on 19-Jul-2009 12:18 AM -
Touchscreen help with N97 Mini
Hi,
i'm having problems with my N97Mini, the touchscreen has completely stopped working and now i have to send it back to Nokia to be fixed, i wanted to check that i've all my contacts saved to my sim card before doing so, but i cant use the screen...
i'm pretty much just wondering if there were any key shortcuts to help click on "ok, back, done" buttons?
thanks
Solved!
Go to Solution.connecting to your computer may be your best bet
There's no dignity in begging for kudos. Do it for the karma. -
Help with N97 and Access points after V20 upgrade
Hi Guys,
I'm hoping someone can help me - I have an 505 uk unit and have changed to a generic euro product code to get the V20 software ( as theres a 2 week wait minimum for the network to release its custome version ) and its working brilliantly - except - in connections all my accesspoints have gone - I now show 13 uncategorised access points which I cant expand or open and it wont let me delete the lot as it says its protected Anyone able to sort this out and tell me what to do so I can get back to Internet and Contract WAP etc... destinations?
Much Appreciating any help.
AlexHi Alex,
I am not sure what kind of applications are preloaded in your location. I suppose the problem you faced is unable to delete certain definitions under the Destinations setting?
If a hard reset is not an option (not for me as I have purchased apps from the OVI store), I would create a dummy Destination to house all these unwanted definitions. That way, so long as the default connection does not utilize this dummy Destination, I think you are OK. Hope this helps.
Visit http://www.WilfridWong.com - where all good things are meant to be shared! -
whenever i send or recieve SMS, my phone appear "Memory Full" though i delete all message and change the memmory in use is Mass memory. Plz help me...
Backup.
Deinstall NM.
Deinstall some other applications and move them to E:\
Reinstall NM. -
Can anyone help with iPlayer and Sky Mobile?
Ok, I'm so close to giving up with this useless phone. There are 3 apps on my N97 which give me a constant headache.
BBC iPlayer
Sky Mobile*
YouTube
*I should point out that I only use Sky Mobile to set recordings on my Sky+. I do not use it for, nor have any desire to use it for actually watching Mobile TV.
All of these apps work absolutely fine over my home WiFi network. It's when I try to use them over 3G (my Vodafone Live! connection) that I start running in to trouble.
All 3 give me connection problems, errors, and simply refuse to load half the time when on 3G. I got so annoyed I just did a hard reset the other week, and magically all three started working again. However, now 2 of them are failing me again. YouTube (touch wood) is working fine at the moment, but iPlayer and Sky Mobile just aren't.
iPlayer sometimes works. But sometimes I get script errors (unable to load content), and sometimes it says something about checking my connection settings. I wouldn't mind but it's not actually possible to access any options for the iPlayer. Even in application settings there are no options you're able to set.
Sky Mobile simply flat out refuses to work ever on 3G. But it did after I did a hard reset for a couple of weeks, now it just stopped working! It wont even load. It just gives the error message 'Unable to connect to network - please check connection settings" or something along those lines.
I've tried so many different things. Tried setting my internet connections to 'always ask', tried setting it to default to Vodafone Live! all the time, tried setting my video streaming settings to WAP, all sorts. Every combination I can think of.
I just can't wait to get rid of this phone. I've put so many people off buying one. They see it and think it's all swish and cool, and I just say 'Don't. You'll regret it'. I can't wait for my contract to be up so I can upgrade to an iPhone now Vodafone have got them.
Can anyone help with these problems? Thanks in advance, but I don't hold out much hope...About iPlayer.
Have a chat with Vodaphone. Streaming iPlayer over 3G IS allowed on Vodaphone contract, unlike my O2 contract. As long as your contract allows it, and you have the correct AP address, it should be fine. Vodaphone should be able to give you the setting.
Mine only works over Wlan.
FWIW, "... streaming over 3G is not currently available on iPhone handsets on any mobile network".
p.s. Just to be clear. You say "Tried setting my internet connections to 'always ask', tried setting it to default to Vodafone Live!".
iPlayer uses the Nokia browser "Web". So that's where you should make the setting "Ask when needed". It should then offer you the choice of whatever you've set in Destinations> Internet> then select whatever you've chosen as your GPRS connection.(as advised, or sent to you by Vodaphone). -
Fed up with N97 flagship rip-off
I bought this phone just days after it came out back in june here in Holland.. Thus I paid the full price, meaning I would be one of the users which would recieve the latest rifraf to FW the first, with first I mean one of the first of course. I should have smelled sh^t when my phone came like 5-6 days after my order..
To my surprise I came in contact with N97 users which bought it from a telecom-company which are able to update long before I can.. So my unbranded phone still awaits update while other douches which bought it weeks after me PAYING FAR LESS than me are already up-to-date?? WHAT IS UP WITH THAT??
Contacting Nokia Care and recieved this dumb useless message: FW is still tested and will be available when stable? What the hell?? Why release it in the first place??
Another big surprise, hundreds of euro's for a glitchy phone with headset I barely use, whilst other phone-companies offer some (cheap) fulfilling products such as a leather case etc.
I think this is my OWN fault, I was the one who bought the product, I was the one who trusted Nokia and went through with the phone, I envy family-members who got rid of the piece whilst I still have it in my hand, deffective
I feel really stupid, for buying this product, Safe to say my first phone was Nokia and always trusted Nokia unfortunately a 600 euro rip-off punished this trust
NOKIA BACK TO RUBBER BOOTS!!!!!!
I think I am allowed to write off my frustration in a civilized way as I donated 600 euro's to nokia,
Message Edited by Sokrates on 06-Nov-2009 02:33 PM
Message Edited by Sokrates on 06-Nov-2009 02:40 PMnottmbantam wrote:
Lastly, please be careful and what you say on these "discussion" boards, because there is no room for discussion. If you criticise Nokia, your post will be removed. If you continue, you will be banned. It is not a place for discussion at all. I feel it should be renamed User Instruction Forum. It's about how to get info to use your phone. That's about it.
@ nottmbantam: as you know, we who run this forum only remove posts that clearly violate our guidelines. We do not remove any criticism, as long as it's civil and constructive.
As for the N97 updates, it's unfortunate that the latest version is not yet available for all markets. To my understanding, new versions are released daily for new countries and the Nokia Software Update team is very aware that many of you are waiting for the version for your product codes.
@ Sokrates: I can only guess that there may be something specific in the local N97 version that has made it to be released slower than others. But I am sure that the local Nokia Benelux sales office is also very aware of the situation and are working with the software team to get the local versions available as soon as possible. I would think that this is a top priority for them. Unfortunately there are no public release dates for the new versions, but I am sure it's coming and hopefully soon. I'm sorry that I can't help you more with this.
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee". -
My internet bank is :https://internetsube.akbank.com.tr/FN_fromwwwakbankcom_first.html
There is a "internet şifresi" inbox which is the password inbox. You can login the password with N78 but with n97 you can't.
I wish the problem will fix with the new firmware update.....I have the same issue with mine. People say they can only hear every other word.
I just use a Bluetooth headset now
If this Post is helpful. A click on the White Kudos star is always Appreciated
Last Nokia: Nokia Lumia 800
Current Phone: A Non Nokia Device
Previous Phones:Don't Ask ;-) -
Help with if statement in cursor and for loop to get output
I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM......... jim@ aol.com.... 284087............. 9/28/2006.......10/5/2006...........690
JIM......... jim@ aol.com.... 292709............. 3/20/2007.......3/28/2007............516
KIM......... kim@ aol.com.... 185083............. 8/31/2004.......2/9/2006............. 928
KIM...........kim@ aol.com.... 190121............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159............. 2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237............. 2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109............. 9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647............. 11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631............. 4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922............. 7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332............. 1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336............. 1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............ 1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............ 48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............ 175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PManalytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results. -
I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
Thank you in advance,Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.
-
Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance! -
Help with HP Laser Printer 1200se
HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie GibsonSorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Going to Australia and need help with Power converters
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.godzillafan868 wrote:
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.
Check the specs on input voltage/frequency of your power supplies.
Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all. These will just need a connector adapter.
Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies. -
Creation of context sensitive help with pure FM 12 usage doesn't work
Hi,
I hope somebody is able to help me with a good hint or tip.
I am trying to create a context-sensitive Microsoft Help with FM12 only using the abilities of FM (no RoboHelp). For some reasons, my assigned ID's are not used in the generated chm file and therefore the help does not work context-sensitively.
What did I do?
- I created my FM files and assigned topic aliases to the headers. I did this two ways: a) using the "Special" menue and assigning a CSH marker and/or b) setting a new marker of type "Topic Alias" and typing the ID. I used only numeric IDs like "2000" or "4200",
- I created a .h file (projectname.h) - based on the format of the file projectname_!Generated!.h (I read this in some instructions). So the .h file (text file) looks like this:
#define 2000 2000 /* 4 Anwendungsoberfläche */
#define 2022 2022 /* 4.1.1 Menü Datei */
#define 2030 2030 /* 4.1.3 Menü Parametersatz */
#define 2180 2180 /* 6.6.7 Objektdialog Q-Regler */
#define 2354 2354 /* 6.9.2 Objektdialog Extran Parameter */
#define 2560 2560 /* 6.9.5 Objektdialog Extran2D Parametersatz */
- I published the Microsoft HTML Help. A projectname_!Generated!.h has been created. My IDs were not used in this file:
#define 2000 1
#define 2022 2
#define 2030 3
#define 2180 4
#define 2354 5
#define 2560 6
- When I open the .chm file and look in the source code, the ID even is totally different. It is not the one, I assigned in FM, it is not the one which I assigned in the projectname.h file and it even is not the one, which was put in the projectname_!Generated!.h file. It is a generated name starting with CSH_1 ...n in a consecutive way numbered.
Example:
<p class="FM_Heading1"><a name="XREF_72066_13_Glossar"></a>Gloss<a name="CSH_1"></a>ar</p>
What goes wrong? Why does FM not take my assigned IDs? I need to use these IDs since our programmers are using those already - I had to re-create the whole online help but the programs stay untouched.
Please help!
Many thanks
MohiHi Jeff,
thanks for your note!
The text in my marker is just a number like "2000" or "4200". As said, I created manually a my.h file and used this marker there. E.g.
#define 2000 2000.
Whereby the first 2000 (in my opinion) is the marker text and the second 2000 is the context ID which the programmers are using for the context sensitive call of the help. My definitions in the my.h file were translated to #define 2000 1 (in the my_!Generated!.h file). The source code "translates" the context ID into CSH_8.
I am still confused :-/
Thanks
Mohi
Maybe you are looking for
-
When i browse on my ipad2, itunes only shows 100 files. Why?
Im sure there are more than just 100 books for sale or 100 albums ect...But whenever I go to the itunes store and look at audiobooks for example theres only 100 to choose from. Where are the thousands of others???
-
Error 2050 with Menu and States - DisplayObject must be a child of the caller.
Hi, I'm starting an application using States and a main Menu and when you click on the menu Item it changes the currentState. I was doing fine until I wanted to dock the Menu using an ApplicationControlBar. You can see the error message: http://dev20
-
Predominantly reddish photo prints predominantly green
Using PhotoshopCS3 on windows xp pro with Epson R800 photo printer with 2GB RAM. Printer was purchased in 2005 but has latest software driver updates. Printer colour management is off. CS3 produces great results until I want the printer, fortunately
-
Ics 5.0p4, howto prevent user from unsubscribing from his default calendar ?
according to the ics.conf, the parameter calstore.subscribed.remove.defaultcalendar should disallow a user the ability to unsubscribe from his default calendar, but even with this parameter set to "no", he can still remove his default calendar from t
-
Playing a prompt while another process is running in the background
I'm running ICM 6 with IP IVR Queue Manager 3.5. I've built a couple of scripts that take input from callers and then uses the input to query a database. Sometimes it takes a few seconds to return with a response so I want to play music or a prompt