Help with new hard drive and data recovery

I have a macbook pro 13" from early 2011...last week the hard drive crashed and after a few hours at the genius bar had to got tekserv to recover my data and get a new hard drive and update to 8GB of Ram. When I got my macbook back I was given an external hard drive that had everything from my old hard drive saved by the users on the old hard drive. I was hoping I could just transfer the user over to the new hard drive but since I had to restart the computer as a new computer I am not able to just reassign my old profile as the new one on this laptop. Maybe I've done something wrong but at this point I transferred all my documents over, moved my music and pictures over but I have a few things I can't figure out that I'm hoping someone can help with.
1. Do emails that were in my mail program from both gmail and my verizon.net program get saved somewhere or do I have to just assume those were lost?
2. my iTunes library is now there but none of my playlists are there. Should those have been saved somewhere in my iTunes folder that I should see them? I'm concerned about syncing my iPhone or iPads to iTunes without those there.
thanks for the help.

Here's the spec page on your PB. http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.ht ml It came with OS 10.2.7 installed. The max OS is Leopard 10.5.x
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4). Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?.
Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
 Cheers, Tom

Similar Messages

Will Time Machine with Leopard Sync With New Hard Drive and Snow Leopard?

My computer is a 20" iMac that I bought in late 2008. The hard drive had trouble so Apple repaired with disk utility. Week later, more trouble so they did full hard drive erase. Data was backed up on Time Machine, 500GB also bought in 2008. After full hard drive erase, and reinstall of basic software, upon reboot, computer would power on then immediately off. It doesn't get past white screen. They advised a new hard drive install is needed.
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc. He could do it with Snow Leopard but I am scared. I'm afraid because my Time Machine last backup was with Leopard, not snow Leopard. I do not have my application discs with me, they are in storage in another state. Thus, if upon adding replacing hard drive and installing Snow Leopard my computer won't be able to sync FILES and APPLICATIONS from Time Machine because its on Leopard I will have a problem.
How can I either 1)Get a Leopard install disc and do that with the new hard drive install OR 2)make sure that a Snow Leopard install with new hard drive won't prevent my Time Machine from being able to install the saved FILES and APPLICATIONS if I don't have original APPLICATION (ie Aperture, Photoshop) with me? Thanks for any help you can provide.

thetrudz wrote:
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc.
Hi, and welcome to the forums.
That Mac should have come with Leopard. If so, call AppleCare. They'll send you replacement discs for a nominal fee.
Once this is sorted out, make a 8-10 GB partition on an external HD or your internal HD, and use the Restore tab of Disk Utility to copy the Install disc to that partition. Then you can boot and run from it instead of the physical disc. It will boot and run much faster, too.
He could do it with Snow Leopard but I am scared.
If he does, and doesn't provide a retail Snow Leopard disc, you must buy one ($29). It's a violation of the license to share software, and you'll need a SL disc to do things like restore a Snow Leopard backup, or the Snow Leopard Apple apps, or repair the internal HD.
Your best bet is to stay with Leopard, at least until you have access to your 3rd-party software discs.
What you can do, however, is borrow his Snow Leopard Install disc (assuming it's a white Retail disc, not a gray one that came with his Mac), and use it to do a full system restore from your backups. That's not a violation of the license, since you don't install or use OSX from that disc; you just use the Installer utility on it to restore the Leopard OSX and all your data from your backups.
See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for details.

Mediasmart software problem loading onto computer with new hard drive and operating system

My computer recently crashed and I had to buy a new hard drive and operating system. None of the programs from the old hard drive were saved. The computer is an HP Pavilion dv7-3165dx Entertainment Notebook and I have Windows 7 Professional (64x) as the operating system. Tried to download Mediasmart from the HP Web page to play DVD and Blu-Ray Discs. The programs downloaded but will not install. Any suggestions?

waynesworld57 wrote:
My computer recently crashed and I had to buy a new hard drive and operating system. None of the programs from the old hard drive were saved. The computer is an HP Pavilion dv7-3165dx Entertainment Notebook and I have Windows 7 Professional (64x) as the operating system. Tried to download Mediasmart from the HP Web page to play DVD and Blu-Ray Discs. The programs downloaded but will not install. Any suggestions?
Hi,
It looks like it's a common issue: http://h30434.www3.hp.com/t5/TX-TM-Series-Notebooks-Reply-Only/HP-Mediasmart-Software-package-for-Wi...
Try VLC as a multimedia player: http://www.videolan.org/vlc/download-windows.html
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Help With New Hard Drive Installation Recovery

I had a bad hard drive crash. I installed a new one and got the bios to boot from the cd drive, with the windows 7
orginal install cd in the drive. It recognized Drive 0, I clicked new in the options. It created ONE System partition.
Installed windows 7 seemingly fine. Inserted the application and driver recovery disk and installed those. It all seemed fine. This morning I turned it on and it the hard drive error message (3F0) please install an operating system. I shut it down and restarted, it seemed normal. I installed a few programs, shut it down again. Returned to it later, started it up again and it took me to the diagnostic screen telling me SMART Check - Not Installed and Short DST - Not Installed.. Can someone tell me how to delete that partition and I can format the drive in a usb sata enclosure and start over again.
Please tell me the correct proceedure to get this laptop back up and running to a factory state. I have original Windows7 and Windows8 and Application and Driver disks for both OS'es.. I want to stay with the Windows7 installation.
Thanks for any help with this problem. I have no idea where I went wrong !
This question was solved.
View Solution.

It is not impossible that the new hard drive is bad, have seen it before. It is also possible that the sata controller on motherboard is bad-but I would look at that possibilty last. Can you get an exchange on the new hdd?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Help with new hard drive

Only a select few of us have found ourselves in this position. I am a student who takes his laptop to school for learning purposes however after doing a long night as the sound technician at a school show I put my MacBook Pro (Mid 2012 13" 4GB RAM Intel Core i5) into my bag put it over my shoulder and started to walk when I felt like a sudden weight had been lifted off my back and I heard the most colossal bang as then I find that the bag has snapped and my MacBook Pro is on the floor. When I get home I hastily go and check it and I find that there is a sizable dent in the side of my laptop where the hard drive is, so I open it up the hard drive and the SATA connection are fine and my mac still works so I continue to take it to school when a couple of days ago it completely freezes up and refuses to do anything so I turn it off and wait till I get home and then boot it up and all I get is a white screen so I press command and R. I then get I dialogue saying "INTERNET RECOVERY PLEASE WAIT", I read up on internet recovery and find it means something has gone completely wrong with my system. My hard drive has broke. So I go to school and they give me a small 60 GB hard drive spinning at 3,200 RPM which gave me some time to look for anew hard drive online whilst I could still do work on my laptop. I then find a Seagate 1 TB SSHD for £70 on Amazon so I go for it. Now I have followed all the instructions on how to install the drive which is supposedly Mac compatible I then boot my MacBook Pro up holding command and r it then boots into internet recovery I then go to restore the system through Time Machine Back-Up to then find that the SSHD isn't recognized. So I take it out and put it in my now 12 Year Old Power Mac G5 and in registers fine I then formatted it to Mac OS X Extended Journaled and partition it as GUID Partition Map for Intel Macs. I re-insert it into my MacBook Pro and go through the process again however it is still not showing up.
My Question is...
Am I doing something wrong?
Or
Is it the Solid State Hybrid Drive?
I can't Plug the new hard drive in via a SATA to USB and install Mac OS X Yosemite and my files because the only medium that has all my files on is my External Hard drive for time machine back-up.
Any help would be greatly appreciated

"It also seems a bit backwards since you have to erase a hard drive with nothing on it to format it"
At least you are not erasing anything important!! Always worth reformatting a new HD in my opinion, Apple does not make the HDs so you never know what they may have been formatted as/with/on/by etc... Also if you take time to ZERO out any data (see security options button) you would identify/isolate any bad blocks before you start using (highly recommended). This would lead to far few problems later, as you know for sure you have a sound and working disk! Definitely NOT backwards! Just good sense.

Wanting to upgrade Sawtooth 400 with new hard drive and more memory

Have been reading a lot of posts today on the above upgrades. Am quickly getting confused on all of the info, especially on the hard drive upgrades...
Purchased my Sawtooth back in Dec. 2006 on eBay. Should have been using it all of this time, but my budget wouldn't allow me to put more memory (it's got 256MB now) and a new hard drive in it. Tired of seeing it in the way just sitting there!
The G4 has OS X 10.3 on it. Would like to upgrade to Tiger. Is there a firmware update that needs to be done before upgrading to Tiger? I know that 256MB of memory really isn't enough for Tiger. I thought about getting at least a 512MB stick to make the total memory 768MB (wish I could afford to max the memory). Others have said that OWC and Crucial have good quality memory.
The System Profile shows that it has 10 GB and 60GB hard drives. Imagine the 10GB one is the original. The 60GB was probably added on later. Don't know how old the 60GB is. That's one reason I'd like to replace it to at least a 120GB drive, so I can start fresh without worrying about the 60GB dying. (Do understand that any drive can die; new or old...) Have read about the 128GB size limit on my G4. Don't think I'd use most of the 120GB, so I'd like to stay with that size. Budget won't allow to install a PCI card to allow larger drives anyway. Should I remove the 10GB one as I don't think I'd be using it at all?
I installed a Seagate 120GB Barracuda Ultra ATA/100, 7200RPM, 8MB Cache, 3.5" drive (new, got it on eBay for $40!) in my iMac G3 400. Would like to find the same kind of drive for the G4, if it would work. If the same drive would work in the G4, does anyone know where I could purchase one? Will look on eBay etc. in the meantime.
Thanks for any advice and/or suggestions.

Got the Seagate HD installed, PRAM battery replaced and missing PCI cover replaced. Sure wished that I had the extra memory to install now, but I haven't had the chance to order it yet. I know it's easy to do, but I'm going to have to move the Mac to the table and it's heavy for me to lift (bad back).
Anyway, I started to install OS 9 on the Seagate and have hit a stumbling block! Didn't have this problem when I replaced the HD in my iMac, but it was only a 120GB drive (it needed the firmware updated).
I've looked at other posts on installing OS 9 and even on Apple's support documents and can't find what I exactly need to do! Am getting more confused about it the more I try to find the right answers... Hope one of you can help me some more.
I was able to boot the Mac up from the CD (it's the white one with the orange "9" on it). I clicked on the "Mac OS Install" icon, click on "Continue" (on the "Install Mac OS 9) dialog box, and then it says: A valid destination volume can't be found. To continue the installation process, mount a valid volume for software installation." The destination disk options is grayed out. I then clicked on the "Utilities" icon, and then the "Drive Setup" icon. It shows a list of drives and I clicked on the <not initialized> Type ATA, Bus 2, ID 0, LUN 0 and clicked on the "Initialize" button. Then it says: New Partitioning: 1 Mac OS, Initialization Options: None. If you click on Custome Setup, it says that the Partioning Scheme is "Current Volume," 131072MB (131GB?), under Volume Info Type it says Mac OS Standard. The "OK" button is grayed out. If you click on "1 Partition" on "Partitioning Scheme," then the Volume Info Type says "Mac OS Extended, with Size showing 131071MB. The "OK" button is not grayed out. I didn't go any farther with the OS 9 installation, as I don't know what the heck I'm doing! Don't want to mess something up. Do you or anyone who has helped me with this posting, know the steps I should take next? The Seagate Owner's Manual says if you have a system that can't read the entire 160GB, to just partition the drive for 137GB for now if you don't want to add a PCI controller card etc. For now, all I want to do is use the 128 or 131GB (according to what it says) of the 160GB drive without using a different card or software to recognize all of the 160GB. Do I just do one partition or two... and what else? I'm completely lost...
Sorry for the long post, but had to write down the steps I took, so someone could tell me what to do next.
I don't think you have to worry about PRAM settings; they pretty much take care of themselves - and regenerate when they have to. The time to think about PRAM is when you introduce new hardware and catch your Mac expecting same old, same old, and it isn't.
It was kind of hard to get the old PRAM battery out of its holder. I pryed the right side retainer tab just a bit with a screwdriver to get it out. Noticed that one part of the retainer at the base was cracked! Hope I didn't do that! Put some super glue on the crack (was on the outside only from what I could see). Cleaned off the battery contacts with a pencil eraser and dry Q-tip before installing the new battery. It seems to stay in place even though with the side retainer cracked. If the side retainer would break off the next time the battery would need replacing, would the battery contacts hold it ok? Or would the whole logic board have to be replaced? I put a SAFT 3.6v LS14250 battery in it. The old one was a SAFT LS14250C. Hope the "C" at the end doesn't mean anything.

Help with new Hard drive Please!!

HI
I have a K8n Neo that i have been running fine with a 80GB edie hard drive that has been running fine for the last 3 months.
But i decided to upgrade to a SATA hard drive ( Samsung 160gb spinpoint )
So i fitted the hard drive connected all ok!
But when i try to load windows xp pro i get a error!
It says:-
An error occurred while setup was updating partition information on:
131070 mb disk0 at id0 on bus0 on atapi [MBR] set-up cannot continue??
I do not think it can be the hard drive as this is the secound one that i have tried!
Can someone PLEASE help me before i go MAD!!
Lots of thanks
Numpty 69

numpty,
the following steps helped me to seamlessly migrate from IDE to a 160 GB SATA Maxtor.
First of all I hope you still have your old IDE HD set-up as a bootable device with OS installed. Unplug your SATA drive and revert to your old PATA drive as boot.
Second, shut down your computer, plug in your new SATA drive and follow this thread for single SATA drive set-up Single SATA or Multiple Drive Array Setup FAQ
save and exit BIOS, re-boot and enter BIOS again. You should now see your SATA drive in the boot order.
Except: I do not see from your specs whether you run XP with SP2. If not, you ran into the issue of the 128 GB limit and XP will not recognize your drive.
Do not set it as boot yet. For me, it even worked out to turn off SATA RAID again.
Third, boot OS from PATA drive. XP should now recognize your new SATA drive and start installing the SATA drivers (I used the nForce 5.10 and had no issues). Re-boot into OS, you should now see all drives with proper drivers installed in the hardware tab.
Fourth, get yourself a HD cloning tool. I used True Image 8.0 but there should be enough freeware cloning tools around, maybe even from the HD manufacturer itself and clone your old PATA drive to the new SATA.
Fifth, re-boot into BIOS and set the SATA drive as boot now. Save and exit BIOS, re-boot and XP should now be starting from the SATA drive.
Hope it works, I keep my fingers crossed

Trouble upgrading to mountain loin after upgrading mac book pro with new hard drive and adding 8 megs ram

every time after I have upgraded my macbook pro I am unable to upgrade to mountion lion , it aways will either go blank and I have to start fresh from cd system going all the way till I get to last upgrade and then loss everything. any help or what is happening
<Edited by Host>

you are correct, I have had my mac at geek squad to correct this problem and they could not find the fix other thanit was a hard drive problem and they replaced the hard drive and that did not fix the problem, they said it could be the speed of the HD I used as a replacement ,which was 7200,o the nw one is 5800 yet I still or they could not upgrade . they were used a jump drive and they tried to down load from itunes no luck. I started out wth the install disk and stepped up ,what could be wrong?
Preferences
1
2
3
4
5
6
7
8
9
0
=
Backspace
Tab
q
w
e
r
t
y
u
i
o
p
Return
capslock
a
s
d
f
g
h
j
k
l
shift
`
z
x
c
v
b
n
m
shift
English
alt
alt
Preferences

Need Help with External Hard drives and too much music

I am not terribly tech-savvy, and I need your help. I have a G5 PPC dual processor with an internal 250GB drive. I have two seagate firewire/USB2 external hard drives. One is 250GB and one is 350GB. I want to know how to use them to get my Mac to run faster and better.
My original hard drive is 7GB shy of being full. Almost half of this is my itunes library which is over 100GB. The older (250GB) hard drive has about 150GB of photos/videos.
My Mac is running slow as molasses and when I power up the external hard drives it slows down to what I recall my original Mac Plus ran like.
I use the G5 primarily to work with photos, illustrations and creating the occasional DVD with video and photos. the apps I use most often are Photoshop, Illustrator and Painter. I always listen to music while work.
I hope all of this information is helpful! Here is my question:
What is the best way for me to set up and use these external hard drives to return my G5 to its original blazing (to me) fast speed?
PPC G5 Mac OS X (10.4.9)

I think you should look at adding two 500GB internal drives. I'd say Maxtor MaxLine Pro for cost, but they also run much warmer (43ºC even when nearly doing zilch) so I'd go with WD RE2 500GB for $40 ea. more.
dump whatever you don't need, trash anything that is hogging space and is just temp file or useless cache. Web browsers can leave behind a ton of small files eating up tens of MBs.
Use SuperDuper to backup/clone your drive.
Disk Warrior 4 to repair (after it gets to 15% free, or just forget for now).
A 250GB drive formats to 240GB and you have ~3% free it looks like.
For every data drive plan to have two backup drives.
Keep your boot drive to 40% used.
And your data drive to 60%.
Backups can go a little higher.
Drives are cheap and inexpensive, especially for the space and performance. And they have improved SATA over the years it has been out.
By doing a backup followed by erasing your drive, and then restoring it, using SuperDuper, which optimizes the organization, skips copying temp files that aren't needed, it also defragments your files. I would do backup daily to different sets that you "rotate." And before any OS update. And do the erase and restore probably every 2 months.
Make sure you keep one drive partition somewhere that is just your disk utility emergency boot drive that is not a copy of working system, used for doing repairs like running Disk Warrior and Disk Utility.
You may need to repair; backup; even erase and restore your external drives. Rather than spend on vendor made case, just pick up a good FireWire case either with drive, or bare (and add your own). I think it'd add 500GB FW drive though.
Why?
To begin backup of your current drive. To leave your other FW drives "as is" for now.
Then install a new internal 500GB drive as well so you now have a good current backup, and you have moved your data off 250GB to 500GB. If anything happens, you have one off line FW backup.
Then begin to clean up, organize, and get your FW drives working. It sure sounds like they have had some directory or file problems.
You can find a lot of Firewire and SATA drive choices over at OWC:
http://www.macsales.com/firewire/

I got a new hard drive and my recovery disk won't work

I need help with my laptop satellite C650D model no. PSC0YC-02V026
I had to change my hdd and my recovery disk won't work.
When i run the disk i get an error saying that some files can't be read from file or disk.
if i click on the ignore button, i get the same message with a different file.
BOOT64.WIM
BCD
BOOT.SDI
ETFSBOOT
and at the end i get another error message:
Restore Wizard: initrecarea.exe - Application Error
The instruction 0x7656FF26 level refers to the address
0x01D70000 memory. The required data was not placed
memory because of an I / O 0xC000009C standard error.
Error 09-0000-0000
I even try with an windows 7 iso but when it start, i'm being asked for the cd/dvd driver, i download the driver but that didn't work either.

Satellite C650D-02V (PSC0YC-02V026)
When i run the disk i get an error saying that some files can't be read from file or disk..
You can obtain new recovery discs for that Canadian model from Toshiba by calling 800-663-0378.
-Jerry

Hp mini 110 boot disk error after installing new hard drive and system recovery

Need help, HP mini 110 Windows 7 32 bit. using my recovery disks I created i was able to recover to the old 160 gb hard drive. After I installed new 320 Gig drive and used my recovery disks i now get boot disk error. Looks like system was installed on new drive. but will not boot to complete set up.

If you use the recovery disk, your machine will restore to its default factory state. Try to reinstall the 320 GB you have if you want it to get back.
Can't get enough of this Envy...

Need help installing new hard drive and wiping the old one for Windows XP.

I’ve searched to try and figure out the answer to my question and haven’t been too successful, so hopefully someone can help me out. I have a new Mac Pro that I haven’t even turned it on yet because I’m waiting for some upgrades to show up. Here is what I plan to do, I’m unsure of what I need to do and what order to do it in:
It has a stock 250GB hard drive that I plan to wipe and install Windows XP on. I have a new 750GB drive coming that will run Leopard which will be my primary OS. Once I have this set up, I will probably try running VM Fusion which I assume I can install later on. Here are my questions:
When I put my new blank 750GB drive in to install Leopard, will OS X boot up off the Leopard install disc to then allow me to do the install?
When do I wipe the smaller drive to put Windows on it, before or after I’ve installed Leopard on the new drive? How should I wipe it, using the Bootcamp setup assistant or Disc Utility? If I wipe it after installing Leopard, will I be prompted for which drive to boot from?
Thanks in advance for any help.

I don't use Windows, but I think the proper order to do things would be this:
First, if your Mac Pro came with Tiger installed, when you start it up for the first time, you'll need to go through some initial setup, create an administrator account, etc. You can go ahead and do this.
Afterwards, you can install your 750 GB drive. Next, you can insert your Leopard disk, and go to System Preferences/Startup Disk to choose to start up from the disk. (Alternatively, if you just choose "Install Mac OS X" from the disk, it will instruct you to restart the mac.)
When the mac boots from the disc, install Leopard on your 750. Once you have that done, and have booted from that drive, you'll be able to erase your 250 in Disk Utility, and then install Windows on it.

Help with external hard drive and firewire?

2 questions: 1) Does anyone know if there is a hub made for the firewire 800 to allow more than 1 device to be hooked up at 1 time? ex... capture deck and external hard drive.
2) I was cleaning up my external hard drive. I ejected it and now it won't come back on line when it is plugged in. Any Advice?

Most external FW enclosures have 2xFW800 ports that allow daisy-chaining multiple drives.
There are FW800 hubs available, but I don't recommend them if you intend to use with a camcorder or deck. Ditto regarding daisy-chaining a camcorder or deck with a FW drive ... the camcorder/deck usually locks up the FW bus if you have daisy-chained it with a FW drive.

Question: New Hard Drive and Data Transfer Kit Device

Yep, I go another HDD this time for my lil Compaq Persario 700 series notebook OS Win XP. I bought a DriveWire Univeral Adapter & Data Transfer Kit. I want to know if there would be any issue transferring my iTunes Library to my new HDD? I do have some music apart of my iTunes Library that's DRM protected. Should still deactivate my account during the transfer . . . that is, if it's possible. Thank you for any assistance your can give me. Itunes 10 by the way.

From what you posted, you should be able to set the itunes media folder location to the exHD and then run the ituens consolidate library command.
That will put your itunes library content onto the exHD.
Here's Apple's article on that
http://support.apple.com/kb/ht1364
Pay attention to this note from it
+Note: If you move your library to an external drive, you'll need to power up and connect the drive before starting iTunes. If you don't, iTunes will prompt you to either locate the library or to create a new library (which will result in an empty library). No matter what, it's always a good idea to have a backup of the media you have in iTunes.+
That means you MUST have the exHD connected BEFORe starting itunes. WHat it doesn't mention is, it always needs to have the same drive letter. WIndows can change USB port drive letter without telling you it's doing it. Best practice, is to assign a permanent drive letter such as m: for Media. You can assign drive letters using windows disk manager.
There's no need to deactivate any account during this procedure - why do you think you should?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

Help with new hard drive and data recovery

Similar Messages

Maybe you are looking for