Help With New Hard Drive Installation Recovery

I had a bad hard drive crash. I installed a new one and got the bios to boot from the cd drive, with the windows 7
orginal install cd in the drive. It recognized Drive 0, I clicked new in the options. It created ONE System partition.
Installed windows 7 seemingly fine. Inserted the application and driver recovery disk and installed those. It all seemed fine. This morning I turned it on and it the hard drive error message (3F0) please install an operating system. I shut it down and restarted, it seemed normal. I installed a few programs, shut it down again. Returned to it later, started it up again and it took me to the diagnostic screen telling me SMART Check - Not Installed and Short DST - Not Installed.. Can someone tell me how to delete that partition and I can format the drive in a usb sata enclosure and start over again.
Please tell me the correct proceedure to get this laptop back up and running to a factory state. I have original Windows7 and Windows8 and Application and Driver disks for both OS'es.. I want to stay with the Windows7 installation.
Thanks for any help with this problem. I have no idea where I went wrong !
This question was solved.
View Solution.

It is not impossible that the new hard drive is bad, have seen it before. It is also possible that the sata controller on motherboard is bad-but I would look at that possibilty last. Can you get an exchange on the new hdd?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

Help with new hard drive and data recovery

I have a macbook pro 13" from early 2011...last week the hard drive crashed and after a few hours at the genius bar had to got tekserv to recover my data and get a new hard drive and update to 8GB of Ram. When I got my macbook back I was given an external hard drive that had everything from my old hard drive saved by the users on the old hard drive. I was hoping I could just transfer the user over to the new hard drive but since I had to restart the computer as a new computer I am not able to just reassign my old profile as the new one on this laptop. Maybe I've done something wrong but at this point I transferred all my documents over, moved my music and pictures over but I have a few things I can't figure out that I'm hoping someone can help with.
1. Do emails that were in my mail program from both gmail and my verizon.net program get saved somewhere or do I have to just assume those were lost?
2. my iTunes library is now there but none of my playlists are there. Should those have been saved somewhere in my iTunes folder that I should see them? I'm concerned about syncing my iPhone or iPads to iTunes without those there.
thanks for the help.

Here's the spec page on your PB. http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.ht ml It came with OS 10.2.7 installed. The max OS is Leopard 10.5.x
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4). Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?.
Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
 Cheers, Tom

Help with new hard drive

Only a select few of us have found ourselves in this position. I am a student who takes his laptop to school for learning purposes however after doing a long night as the sound technician at a school show I put my MacBook Pro (Mid 2012 13" 4GB RAM Intel Core i5) into my bag put it over my shoulder and started to walk when I felt like a sudden weight had been lifted off my back and I heard the most colossal bang as then I find that the bag has snapped and my MacBook Pro is on the floor. When I get home I hastily go and check it and I find that there is a sizable dent in the side of my laptop where the hard drive is, so I open it up the hard drive and the SATA connection are fine and my mac still works so I continue to take it to school when a couple of days ago it completely freezes up and refuses to do anything so I turn it off and wait till I get home and then boot it up and all I get is a white screen so I press command and R. I then get I dialogue saying "INTERNET RECOVERY PLEASE WAIT", I read up on internet recovery and find it means something has gone completely wrong with my system. My hard drive has broke. So I go to school and they give me a small 60 GB hard drive spinning at 3,200 RPM which gave me some time to look for anew hard drive online whilst I could still do work on my laptop. I then find a Seagate 1 TB SSHD for £70 on Amazon so I go for it. Now I have followed all the instructions on how to install the drive which is supposedly Mac compatible I then boot my MacBook Pro up holding command and r it then boots into internet recovery I then go to restore the system through Time Machine Back-Up to then find that the SSHD isn't recognized. So I take it out and put it in my now 12 Year Old Power Mac G5 and in registers fine I then formatted it to Mac OS X Extended Journaled and partition it as GUID Partition Map for Intel Macs. I re-insert it into my MacBook Pro and go through the process again however it is still not showing up.
My Question is...
Am I doing something wrong?
Or
Is it the Solid State Hybrid Drive?
I can't Plug the new hard drive in via a SATA to USB and install Mac OS X Yosemite and my files because the only medium that has all my files on is my External Hard drive for time machine back-up.
Any help would be greatly appreciated

"It also seems a bit backwards since you have to erase a hard drive with nothing on it to format it"
At least you are not erasing anything important!! Always worth reformatting a new HD in my opinion, Apple does not make the HDs so you never know what they may have been formatted as/with/on/by etc... Also if you take time to ZERO out any data (see security options button) you would identify/isolate any bad blocks before you start using (highly recommended). This would lead to far few problems later, as you know for sure you have a sound and working disk! Definitely NOT backwards! Just good sense.

Problems with new hard drive installation

Our hard drive died, so we replaced it with a 250 GB Seagate Barracuda ATA HD. I used my 10.2 disks to install the software and system (after my husband installed the HD itself - I know nothing about the wiring and how it all works). I've done software update online, which brings me to 10.2.8. Now, I'm trying to use my CDs and DVDs to install any other applications I'd purchased, such as iLife. The disk icon appears on my desktop, but when I double-click it the installation does not launch. Then, I tried clicking on my installed applications, and they weren't opening either. I put an Apple Hardware Test disk in and rebooted, and my mouse wouldn't work to click on the "run test" button. What does all of this mean, and how do I fix it? Could the HD be installed incorrectly? This leads me to yet another question: when I replaced this HD with the Seagate, does my computer still have a SuperDrive? Sorry for so many questions in one post. They all relate to starting from scratch and re-installing everything with this new HD. Thank you for your help!

now, I had iPhoto open flawlessly and my install DVD for iLife seems to be working fine (installing Quick Time now). I have no idea why it took a few re-boots to get these items working. HMMMM... Assuming all goes well, my only question now is whether or not I still have a superdrive if I replace a dead hard drive?

Help with new Hard drive Please!!

HI
I have a K8n Neo that i have been running fine with a 80GB edie hard drive that has been running fine for the last 3 months.
But i decided to upgrade to a SATA hard drive ( Samsung 160gb spinpoint )
So i fitted the hard drive connected all ok!
But when i try to load windows xp pro i get a error!
It says:-
An error occurred while setup was updating partition information on:
131070 mb disk0 at id0 on bus0 on atapi [MBR] set-up cannot continue??
I do not think it can be the hard drive as this is the secound one that i have tried!
Can someone PLEASE help me before i go MAD!!
Lots of thanks
Numpty 69

numpty,
the following steps helped me to seamlessly migrate from IDE to a 160 GB SATA Maxtor.
First of all I hope you still have your old IDE HD set-up as a bootable device with OS installed. Unplug your SATA drive and revert to your old PATA drive as boot.
Second, shut down your computer, plug in your new SATA drive and follow this thread for single SATA drive set-up Single SATA or Multiple Drive Array Setup FAQ
save and exit BIOS, re-boot and enter BIOS again. You should now see your SATA drive in the boot order.
Except: I do not see from your specs whether you run XP with SP2. If not, you ran into the issue of the 128 GB limit and XP will not recognize your drive.
Do not set it as boot yet. For me, it even worked out to turn off SATA RAID again.
Third, boot OS from PATA drive. XP should now recognize your new SATA drive and start installing the SATA drivers (I used the nForce 5.10 and had no issues). Re-boot into OS, you should now see all drives with proper drivers installed in the hardware tab.
Fourth, get yourself a HD cloning tool. I used True Image 8.0 but there should be enough freeware cloning tools around, maybe even from the HD manufacturer itself and clone your old PATA drive to the new SATA.
Fifth, re-boot into BIOS and set the SATA drive as boot now. Save and exit BIOS, re-boot and XP should now be starting from the SATA drive.
Hope it works, I keep my fingers crossed

Will Time Machine with Leopard Sync With New Hard Drive and Snow Leopard?

My computer is a 20" iMac that I bought in late 2008. The hard drive had trouble so Apple repaired with disk utility. Week later, more trouble so they did full hard drive erase. Data was backed up on Time Machine, 500GB also bought in 2008. After full hard drive erase, and reinstall of basic software, upon reboot, computer would power on then immediately off. It doesn't get past white screen. They advised a new hard drive install is needed.
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc. He could do it with Snow Leopard but I am scared. I'm afraid because my Time Machine last backup was with Leopard, not snow Leopard. I do not have my application discs with me, they are in storage in another state. Thus, if upon adding replacing hard drive and installing Snow Leopard my computer won't be able to sync FILES and APPLICATIONS from Time Machine because its on Leopard I will have a problem.
How can I either 1)Get a Leopard install disc and do that with the new hard drive install OR 2)make sure that a Snow Leopard install with new hard drive won't prevent my Time Machine from being able to install the saved FILES and APPLICATIONS if I don't have original APPLICATION (ie Aperture, Photoshop) with me? Thanks for any help you can provide.

thetrudz wrote:
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc.
Hi, and welcome to the forums.
That Mac should have come with Leopard. If so, call AppleCare. They'll send you replacement discs for a nominal fee.
Once this is sorted out, make a 8-10 GB partition on an external HD or your internal HD, and use the Restore tab of Disk Utility to copy the Install disc to that partition. Then you can boot and run from it instead of the physical disc. It will boot and run much faster, too.
He could do it with Snow Leopard but I am scared.
If he does, and doesn't provide a retail Snow Leopard disc, you must buy one ($29). It's a violation of the license to share software, and you'll need a SL disc to do things like restore a Snow Leopard backup, or the Snow Leopard Apple apps, or repair the internal HD.
Your best bet is to stay with Leopard, at least until you have access to your 3rd-party software discs.
What you can do, however, is borrow his Snow Leopard Install disc (assuming it's a white Retail disc, not a gray one that came with his Mac), and use it to do a full system restore from your backups. That's not a violation of the license, since you don't install or use OSX from that disc; you just use the Installer utility on it to restore the Leopard OSX and all your data from your backups.
See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for details.

My MacBook won't boot into recovery mode after new hard drive installation. Please help!

I just installed a new hard drive. On boot it keeps on going to the flashing folder with a question mark inside.
I was able to format the new hard drive but am unable to boot into recovery mode to install the operating system over the air.
When I hold down Command -R it keeps on taking me to the flashing folder.
Please help!

A new hard drive doesn't have a recovery partition. It's totally blank.You're going to need either your original install discs or a Snow Leopard retail disc from which partition, format and install OS X.

Replaced Hp with new hard drive but now i cannot install windows 7 recovery disks

Ok, so my laptop is a hp pavilion dv4-2165dx that has a broken screen and sometime after best buy tried to fix it the hard disk blew. I bought a new hard disk and put it in the computer and i got the official recovery and installation disks for windows 7. The hard drive is recognized by the computer and does start the recovery manager but it gets to 1% and does not go further. I let it run all night and the next morning it said that the cd failed. Did it fail because i have to connect an hdmi cord to my lg tv to see anything? Or was it because of something else?
I researched and found that with a new hard drive i will have to partition it and then format it to work with windows 7.
My question is, if the computer doesnt boot or let me use windows how can i partition and format the new hard disk? I have an older hp laptop as well that works efficiently in regard to its age (7) yrs. i wonder if i can buy a usb to sata/ide cord and attach the new disk to my old laptop and partition/format it there? Idk

Hello CaptianNike, welcome to the HP Forums.
I see that you're trying to install Windows 7 on a replacement hard drive. I will try to assist you with this.
You definitely could use another computer to format and partition the drive. I'm not certain about the cables you've mentioned though (looked with goolgle and you can get usb to sata cables). If the computer is a desktop you should be able to connect it internally to just do the format/partition.
If the recovery disks worked correctly, then you should have the option to do the format and partition via Windows. This could be an indication as well that there's an issue with the disks.
Which leaves you with the option of obtaining another set of disks to try, or trying to partition first then installing. The easier would be the latter.
I hope this helps.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Recovery discs do not work with new hard drive

Hi I have come here desperately seeking help as I am not too knowledgeable with the workings of computers and I have spent an incredible amount of time just trying to get my laptop to some level of functionality. I purchased a HP Envy and it had a corrupt hard drive which would not work from day one, laptop was new. After a year of constant pressure on HP they finally decided to replace it and let me choose any laptop so I went with the Beats Envy 14 as it was the best one offered from the selection. Low and behold the thing would not work properly from day one, again my brother who is much more of an expert said that there was definitely a hard drive issue so for the past 3 years I have put up with a computer that constantly crashes with BSOD, where I have lost data on numerous occasions (only so often I can back up), that I have had to constantly reset the thing using HP recovery discs, and that generally cannot cope when performing multiple tasks. HP are most certainly shocking builds from my experience. Then just last week the hard drive just craps itself and the laptop no longer will boot up. I took it to a guy to get it at leYst working again so he has installed a new hard drive but with an old version of Windows 7. I want to go back to the Windows version I was akin to on the HP recovery disk , and essentially have it all set up as before except for now having a workable hard drive however I get the message: "This computer is not supported by the System Recovery Discs.You will not be able to continue to recover this system with these discs.Error: 0100 - 3385 - 3078" I also tried out of interest to load my old Windows 7 disc I had and XP but had no success. Tried booting from startup etc and various things suggested on help forums. Please tell me I am not stuck with this version of windows. Whilst the discs included Windows 7 it was a totally different version, this home premium one is terrible. Any help/advice would be gratefully received. Thanks

no they were both 500gb. I read about that already, I heard about creating a partition for recovery etc but this is all a bit above me , as I said I am not very technical when it comes to the working of a computer. These discs worked perfectly before but now with the new hard drive will not load at all. I essentially hate the Windows Home Premium verions the guy who fixed it put on, whilst the discs had Windows 7 on them the icons were way smaller, the desktop neater, the buttons different, everything was a lot more modern and I was used to it. This version looks like something from the 90s, have to constantly adjust size of Mozilla when browsing as it is huge. I have my own version of Windows 7 on another disc but the hard drive will not let it load either........considering waiting for Windows 10 but again unsure if this new hard drive will even let that update Thanks

HT201372 used this to make a bootable copy for a new hard drive installation. copied the install find but gave error code 110 when making the disk bootable.. Any help in what this code is

Used createinstallmedis to make a copy of the Mavericks app for use in a new hard drive install.. Copied find but gave error code 110 and failed to make the flash drive bootable.. Any help in what errror code means?

Did you partition and format the flash drive first? See the following:
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Make your own Mavericks flash drive installer using the Mavericks tool:
Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

Recovery disk with new hard drive

Hi guys i want to replace my hard drive with this one
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=61389&CatId=2459
but hp is telling me that if i don't buy a hp hard drive the recovery disk won't work is that true?
this is the pc that i have, and i can' afford the hp one
http://h10025.www1.hp.com/ewfrf/wc/product?product=3740333&lc=en&cc=us&dlc=en&lang=en&cc=us

backdrop001,
You can install the new HD, and run the recovery from the disks. That creates a new, out of the box experience. It does not have access to a Recovery partition (that was on the old drive). Don't ask, it can not be done. (Copy the partition).
The clone process creates a full working drive with all your programs and data intact.
The old drive can be cloned onto the new drive. I did it with a Seagate 250GB to a Seagate 1T without ANY problem.
The Seagate Disk Wizard has an intensive manual and instruction file.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Wanting to upgrade Sawtooth 400 with new hard drive and more memory

Have been reading a lot of posts today on the above upgrades. Am quickly getting confused on all of the info, especially on the hard drive upgrades...
Purchased my Sawtooth back in Dec. 2006 on eBay. Should have been using it all of this time, but my budget wouldn't allow me to put more memory (it's got 256MB now) and a new hard drive in it. Tired of seeing it in the way just sitting there!
The G4 has OS X 10.3 on it. Would like to upgrade to Tiger. Is there a firmware update that needs to be done before upgrading to Tiger? I know that 256MB of memory really isn't enough for Tiger. I thought about getting at least a 512MB stick to make the total memory 768MB (wish I could afford to max the memory). Others have said that OWC and Crucial have good quality memory.
The System Profile shows that it has 10 GB and 60GB hard drives. Imagine the 10GB one is the original. The 60GB was probably added on later. Don't know how old the 60GB is. That's one reason I'd like to replace it to at least a 120GB drive, so I can start fresh without worrying about the 60GB dying. (Do understand that any drive can die; new or old...) Have read about the 128GB size limit on my G4. Don't think I'd use most of the 120GB, so I'd like to stay with that size. Budget won't allow to install a PCI card to allow larger drives anyway. Should I remove the 10GB one as I don't think I'd be using it at all?
I installed a Seagate 120GB Barracuda Ultra ATA/100, 7200RPM, 8MB Cache, 3.5" drive (new, got it on eBay for $40!) in my iMac G3 400. Would like to find the same kind of drive for the G4, if it would work. If the same drive would work in the G4, does anyone know where I could purchase one? Will look on eBay etc. in the meantime.
Thanks for any advice and/or suggestions.

Got the Seagate HD installed, PRAM battery replaced and missing PCI cover replaced. Sure wished that I had the extra memory to install now, but I haven't had the chance to order it yet. I know it's easy to do, but I'm going to have to move the Mac to the table and it's heavy for me to lift (bad back).
Anyway, I started to install OS 9 on the Seagate and have hit a stumbling block! Didn't have this problem when I replaced the HD in my iMac, but it was only a 120GB drive (it needed the firmware updated).
I've looked at other posts on installing OS 9 and even on Apple's support documents and can't find what I exactly need to do! Am getting more confused about it the more I try to find the right answers... Hope one of you can help me some more.
I was able to boot the Mac up from the CD (it's the white one with the orange "9" on it). I clicked on the "Mac OS Install" icon, click on "Continue" (on the "Install Mac OS 9) dialog box, and then it says: A valid destination volume can't be found. To continue the installation process, mount a valid volume for software installation." The destination disk options is grayed out. I then clicked on the "Utilities" icon, and then the "Drive Setup" icon. It shows a list of drives and I clicked on the <not initialized> Type ATA, Bus 2, ID 0, LUN 0 and clicked on the "Initialize" button. Then it says: New Partitioning: 1 Mac OS, Initialization Options: None. If you click on Custome Setup, it says that the Partioning Scheme is "Current Volume," 131072MB (131GB?), under Volume Info Type it says Mac OS Standard. The "OK" button is grayed out. If you click on "1 Partition" on "Partitioning Scheme," then the Volume Info Type says "Mac OS Extended, with Size showing 131071MB. The "OK" button is not grayed out. I didn't go any farther with the OS 9 installation, as I don't know what the heck I'm doing! Don't want to mess something up. Do you or anyone who has helped me with this posting, know the steps I should take next? The Seagate Owner's Manual says if you have a system that can't read the entire 160GB, to just partition the drive for 137GB for now if you don't want to add a PCI controller card etc. For now, all I want to do is use the 128 or 131GB (according to what it says) of the 160GB drive without using a different card or software to recognize all of the 160GB. Do I just do one partition or two... and what else? I'm completely lost...
Sorry for the long post, but had to write down the steps I took, so someone could tell me what to do next.
I don't think you have to worry about PRAM settings; they pretty much take care of themselves - and regenerate when they have to. The time to think about PRAM is when you introduce new hardware and catch your Mac expecting same old, same old, and it isn't.
It was kind of hard to get the old PRAM battery out of its holder. I pryed the right side retainer tab just a bit with a screwdriver to get it out. Noticed that one part of the retainer at the base was cracked! Hope I didn't do that! Put some super glue on the crack (was on the outside only from what I could see). Cleaned off the battery contacts with a pencil eraser and dry Q-tip before installing the new battery. It seems to stay in place even though with the side retainer cracked. If the side retainer would break off the next time the battery would need replacing, would the battery contacts hold it ok? Or would the whole logic board have to be replaced? I put a SAFT 3.6v LS14250 battery in it. The old one was a SAFT LS14250C. Hope the "C" at the end doesn't mean anything.

Windows 7 won't load after installing new Hard Drive and Recovery software

HP G72 Notebook PC
xz218UAR
I guess a virus crashed my hard drive so I bought a new one. I installed the new drive and loaded the recovery disks that I also bought from HP. Apparently Windows didn't load properly and it keeps telling me to RELOAD WINDOWS. I've tried starting over from Disk 1 but it's not doing anything different to fix it.
I removed the new hard drive and reinstalled it but it's still doing the same thing.
What am I doing wrong and HOW DO I FIX IT?

Hi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Need help with replacement hard drive

My hard drive has stopped working on this computer and since i only purchased it on 10/2012 I really don't want to replace it just yet. I am trying to buy a new hard drive but I would like a Seagate. I want to upgrade from 1 TB to 2TB. I was wondering if there is a Seagate product out there that would be compatable with the original hard drive but in 2 TB.The original hard drive is a HDD GNRC 1 TB SATA 3 ECO 7200 rpm 3.5". I was looking at a Seagate 2TB SATA 6.0 but I do not know is the SATA 6 will work with the original SATA 3. Can you please help me or guide me in the right direction for a replacement. I also have the HP recovery CD's coming to me in the mail.Thanks,GinaCee

Hi Big_Dave,Thank you for your help. I found this hard drive at Newegg and I was hoping you could tell me if it would be compatable.Seagate Barracuda ST2000DM001 2TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive Bare Drive. Or is there any Seagate product you could reccomend? I have a Seagate external hard drive and I like thier product, so I was hoping that they made something compatable for my HP. I will be installing this drive myself. I have all the instructions from the HP website and it doesn't look that difficult. Just waiting for my restore CD's and a replacement hard drive so I can start this project. Thanks again!Gina

Can't recover software to Satellite L745-S4210 with new hard drive

Was using the laptop when it completely froze. Used power button to force shutdown. When restarted, hard drive was making a ticking noise and got this error message:
PXE-MOF: Exiting PXE ROM
No bootable device - insert boot disk and press any key.
Setup utility did not show the presence of a hard disk drive. Assumed that hard drive had gone back.
Purchased a new hard disk drive at MicroCenter. Toshiba 2.5-inch SATA 640GB drive, the same drive that came in the laptop from the factory. Also used the opportunity to upgrade RAM from 4MB to 8MB.
Installed new hard disk drive and new memory. Ordered the Recovery Disk set from Toshiba.
At startup, new hard drive doesn't tick. Setup utility sees a Toshiba hard disk drive. Got the "no bootable device" message. Inserted the first disk of the Recovery package and held down the C key, per instructions. System began to respond but then switched to Windows Boot Manager screen.
Here are the error messages:
File: \Boot\BCD
Status: 0xc00000e9
Info: An unexpected I/O error has occurred
Reseated both new hard drive and new RAM. Tried again with same result. Reinstalled old RAM. Tried again with same result.
Now at a wall. What has gone wrong? Is the new hard disk bad? Bigger problem. The unit is outside the factory warranty.
Any help is appreciated.

File: \Boot\BCD
Status: 0xc00000e9
Info: An unexpected I/O error has occurred
I don't understand how that could appear when you boot from a recovery disc with a new hard drive in place. It implies there is something on the drive.
0xc00000e9 "Boot\BCD" "unexpected I/O error "
Maybe try another drive?
-Jerry

Help With New Hard Drive Installation Recovery

Similar Messages

Maybe you are looking for