Help with new hard drive

Only a select few of us have found ourselves in this position. I am a student who takes his laptop to school for learning purposes however after doing a long night as the sound technician at a school show I put my MacBook Pro (Mid 2012 13" 4GB RAM Intel Core i5) into my bag put it over my shoulder and started to walk when I felt like a sudden weight had been lifted off my back and I heard the most colossal bang as then I find that the bag has snapped and my MacBook Pro is on the floor. When I get home I hastily go and check it and I find that there is a sizable dent in the side of my laptop where the hard drive is, so I open it up the hard drive and the SATA connection are fine and my mac still works so I continue to take it to school when a couple of days ago it completely freezes up and refuses to do anything so I turn it off and wait till I get home and then boot it up and all I get is a white screen so I press command and R. I then get I dialogue saying "INTERNET RECOVERY PLEASE WAIT", I read up on internet recovery and find it means something has gone completely wrong with my system. My hard drive has broke. So I go to school and they give me a small 60 GB hard drive spinning at 3,200 RPM which gave me some time to look for anew hard drive online whilst I could still do work on my laptop. I then find a Seagate 1 TB SSHD for £70 on Amazon so I go for it. Now I have followed all the instructions on how to install the drive which is supposedly Mac compatible I then boot my MacBook Pro up holding command and r it then boots into internet recovery I then go to restore the system through Time Machine Back-Up to then find that the SSHD isn't recognized. So I take it out and put it in my now 12 Year Old Power Mac G5 and in registers fine I then formatted it to Mac OS X Extended Journaled and partition it as GUID Partition Map for Intel Macs. I re-insert it into my MacBook Pro and go through the process again however it is still not showing up.
My Question is...
Am I doing something wrong?
Or
Is it the Solid State Hybrid Drive?
I can't Plug the new hard drive in via a SATA to USB and install Mac OS X Yosemite and my files because the only medium that has all my files on is my External Hard drive for time machine back-up.
Any help would be greatly appreciated

"It also seems a bit backwards since you have to erase a hard drive with nothing on it to format it"
At least you are not erasing anything important!! Always worth reformatting a new HD in my opinion, Apple does not make the HDs so you never know what they may have been formatted as/with/on/by etc... Also if you take time to ZERO out any data (see security options button) you would identify/isolate any bad blocks before you start using (highly recommended). This would lead to far few problems later, as you know for sure you have a sound and working disk! Definitely NOT backwards! Just good sense.

Similar Messages

Help with new hard drive and data recovery

I have a macbook pro 13" from early 2011...last week the hard drive crashed and after a few hours at the genius bar had to got tekserv to recover my data and get a new hard drive and update to 8GB of Ram. When I got my macbook back I was given an external hard drive that had everything from my old hard drive saved by the users on the old hard drive. I was hoping I could just transfer the user over to the new hard drive but since I had to restart the computer as a new computer I am not able to just reassign my old profile as the new one on this laptop. Maybe I've done something wrong but at this point I transferred all my documents over, moved my music and pictures over but I have a few things I can't figure out that I'm hoping someone can help with.
1. Do emails that were in my mail program from both gmail and my verizon.net program get saved somewhere or do I have to just assume those were lost?
2. my iTunes library is now there but none of my playlists are there. Should those have been saved somewhere in my iTunes folder that I should see them? I'm concerned about syncing my iPhone or iPads to iTunes without those there.
thanks for the help.

Here's the spec page on your PB. http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.ht ml It came with OS 10.2.7 installed. The max OS is Leopard 10.5.x
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4). Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?.
Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
 Cheers, Tom

Help With New Hard Drive Installation Recovery

I had a bad hard drive crash. I installed a new one and got the bios to boot from the cd drive, with the windows 7
orginal install cd in the drive. It recognized Drive 0, I clicked new in the options. It created ONE System partition.
Installed windows 7 seemingly fine. Inserted the application and driver recovery disk and installed those. It all seemed fine. This morning I turned it on and it the hard drive error message (3F0) please install an operating system. I shut it down and restarted, it seemed normal. I installed a few programs, shut it down again. Returned to it later, started it up again and it took me to the diagnostic screen telling me SMART Check - Not Installed and Short DST - Not Installed.. Can someone tell me how to delete that partition and I can format the drive in a usb sata enclosure and start over again.
Please tell me the correct proceedure to get this laptop back up and running to a factory state. I have original Windows7 and Windows8 and Application and Driver disks for both OS'es.. I want to stay with the Windows7 installation.
Thanks for any help with this problem. I have no idea where I went wrong !
This question was solved.
View Solution.

It is not impossible that the new hard drive is bad, have seen it before. It is also possible that the sata controller on motherboard is bad-but I would look at that possibilty last. Can you get an exchange on the new hdd?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Help with new Hard drive Please!!

HI
I have a K8n Neo that i have been running fine with a 80GB edie hard drive that has been running fine for the last 3 months.
But i decided to upgrade to a SATA hard drive ( Samsung 160gb spinpoint )
So i fitted the hard drive connected all ok!
But when i try to load windows xp pro i get a error!
It says:-
An error occurred while setup was updating partition information on:
131070 mb disk0 at id0 on bus0 on atapi [MBR] set-up cannot continue??
I do not think it can be the hard drive as this is the secound one that i have tried!
Can someone PLEASE help me before i go MAD!!
Lots of thanks
Numpty 69

numpty,
the following steps helped me to seamlessly migrate from IDE to a 160 GB SATA Maxtor.
First of all I hope you still have your old IDE HD set-up as a bootable device with OS installed. Unplug your SATA drive and revert to your old PATA drive as boot.
Second, shut down your computer, plug in your new SATA drive and follow this thread for single SATA drive set-up Single SATA or Multiple Drive Array Setup FAQ
save and exit BIOS, re-boot and enter BIOS again. You should now see your SATA drive in the boot order.
Except: I do not see from your specs whether you run XP with SP2. If not, you ran into the issue of the 128 GB limit and XP will not recognize your drive.
Do not set it as boot yet. For me, it even worked out to turn off SATA RAID again.
Third, boot OS from PATA drive. XP should now recognize your new SATA drive and start installing the SATA drivers (I used the nForce 5.10 and had no issues). Re-boot into OS, you should now see all drives with proper drivers installed in the hardware tab.
Fourth, get yourself a HD cloning tool. I used True Image 8.0 but there should be enough freeware cloning tools around, maybe even from the HD manufacturer itself and clone your old PATA drive to the new SATA.
Fifth, re-boot into BIOS and set the SATA drive as boot now. Save and exit BIOS, re-boot and XP should now be starting from the SATA drive.
Hope it works, I keep my fingers crossed

Will Time Machine with Leopard Sync With New Hard Drive and Snow Leopard?

My computer is a 20" iMac that I bought in late 2008. The hard drive had trouble so Apple repaired with disk utility. Week later, more trouble so they did full hard drive erase. Data was backed up on Time Machine, 500GB also bought in 2008. After full hard drive erase, and reinstall of basic software, upon reboot, computer would power on then immediately off. It doesn't get past white screen. They advised a new hard drive install is needed.
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc. He could do it with Snow Leopard but I am scared. I'm afraid because my Time Machine last backup was with Leopard, not snow Leopard. I do not have my application discs with me, they are in storage in another state. Thus, if upon adding replacing hard drive and installing Snow Leopard my computer won't be able to sync FILES and APPLICATIONS from Time Machine because its on Leopard I will have a problem.
How can I either 1)Get a Leopard install disc and do that with the new hard drive install OR 2)make sure that a Snow Leopard install with new hard drive won't prevent my Time Machine from being able to install the saved FILES and APPLICATIONS if I don't have original APPLICATION (ie Aperture, Photoshop) with me? Thanks for any help you can provide.

thetrudz wrote:
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc.
Hi, and welcome to the forums.
That Mac should have come with Leopard. If so, call AppleCare. They'll send you replacement discs for a nominal fee.
Once this is sorted out, make a 8-10 GB partition on an external HD or your internal HD, and use the Restore tab of Disk Utility to copy the Install disc to that partition. Then you can boot and run from it instead of the physical disc. It will boot and run much faster, too.
He could do it with Snow Leopard but I am scared.
If he does, and doesn't provide a retail Snow Leopard disc, you must buy one ($29). It's a violation of the license to share software, and you'll need a SL disc to do things like restore a Snow Leopard backup, or the Snow Leopard Apple apps, or repair the internal HD.
Your best bet is to stay with Leopard, at least until you have access to your 3rd-party software discs.
What you can do, however, is borrow his Snow Leopard Install disc (assuming it's a white Retail disc, not a gray one that came with his Mac), and use it to do a full system restore from your backups. That's not a violation of the license, since you don't install or use OSX from that disc; you just use the Installer utility on it to restore the Leopard OSX and all your data from your backups.
See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for details.

Help restore new hard drive via time machine back up in time capsule

I have followed Pondini's How Do I Restore My Entire System from a backup on Time Capsule. I get all the way to section G with No Problem. I get to section H and my new Hard Drive does not appear in the Select a Destination box. The icon indicating the system is calculating the size of the volume keeps moving. Finally it stops searching/calculating and just offers the button "go back". For some reason it doesnt recognize my new HD. I open Disk Utility and perform a check and the hard drive appears to be working fine. Any help would be greatly appreciated.

Are you sure you formatted the new drive properly, per section (c) there?
If that's not right, you can't install OSX on it.

Recovery discs do not work with new hard drive

Hi I have come here desperately seeking help as I am not too knowledgeable with the workings of computers and I have spent an incredible amount of time just trying to get my laptop to some level of functionality. I purchased a HP Envy and it had a corrupt hard drive which would not work from day one, laptop was new. After a year of constant pressure on HP they finally decided to replace it and let me choose any laptop so I went with the Beats Envy 14 as it was the best one offered from the selection. Low and behold the thing would not work properly from day one, again my brother who is much more of an expert said that there was definitely a hard drive issue so for the past 3 years I have put up with a computer that constantly crashes with BSOD, where I have lost data on numerous occasions (only so often I can back up), that I have had to constantly reset the thing using HP recovery discs, and that generally cannot cope when performing multiple tasks. HP are most certainly shocking builds from my experience. Then just last week the hard drive just craps itself and the laptop no longer will boot up. I took it to a guy to get it at leYst working again so he has installed a new hard drive but with an old version of Windows 7. I want to go back to the Windows version I was akin to on the HP recovery disk , and essentially have it all set up as before except for now having a workable hard drive however I get the message: "This computer is not supported by the System Recovery Discs.You will not be able to continue to recover this system with these discs.Error: 0100 - 3385 - 3078" I also tried out of interest to load my old Windows 7 disc I had and XP but had no success. Tried booting from startup etc and various things suggested on help forums. Please tell me I am not stuck with this version of windows. Whilst the discs included Windows 7 it was a totally different version, this home premium one is terrible. Any help/advice would be gratefully received. Thanks

no they were both 500gb. I read about that already, I heard about creating a partition for recovery etc but this is all a bit above me , as I said I am not very technical when it comes to the working of a computer. These discs worked perfectly before but now with the new hard drive will not load at all. I essentially hate the Windows Home Premium verions the guy who fixed it put on, whilst the discs had Windows 7 on them the icons were way smaller, the desktop neater, the buttons different, everything was a lot more modern and I was used to it. This version looks like something from the 90s, have to constantly adjust size of Mozilla when browsing as it is huge. I have my own version of Windows 7 on another disc but the hard drive will not let it load either........considering waiting for Windows 10 but again unsure if this new hard drive will even let that update Thanks

Replaced Hp with new hard drive but now i cannot install windows 7 recovery disks

Ok, so my laptop is a hp pavilion dv4-2165dx that has a broken screen and sometime after best buy tried to fix it the hard disk blew. I bought a new hard disk and put it in the computer and i got the official recovery and installation disks for windows 7. The hard drive is recognized by the computer and does start the recovery manager but it gets to 1% and does not go further. I let it run all night and the next morning it said that the cd failed. Did it fail because i have to connect an hdmi cord to my lg tv to see anything? Or was it because of something else?
I researched and found that with a new hard drive i will have to partition it and then format it to work with windows 7.
My question is, if the computer doesnt boot or let me use windows how can i partition and format the new hard disk? I have an older hp laptop as well that works efficiently in regard to its age (7) yrs. i wonder if i can buy a usb to sata/ide cord and attach the new disk to my old laptop and partition/format it there? Idk

Hello CaptianNike, welcome to the HP Forums.
I see that you're trying to install Windows 7 on a replacement hard drive. I will try to assist you with this.
You definitely could use another computer to format and partition the drive. I'm not certain about the cables you've mentioned though (looked with goolgle and you can get usb to sata cables). If the computer is a desktop you should be able to connect it internally to just do the format/partition.
If the recovery disks worked correctly, then you should have the option to do the format and partition via Windows. This could be an indication as well that there's an issue with the disks.
Which leaves you with the option of obtaining another set of disks to try, or trying to partition first then installing. The easier would be the latter.
I hope this helps.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Wanting to upgrade Sawtooth 400 with new hard drive and more memory

Have been reading a lot of posts today on the above upgrades. Am quickly getting confused on all of the info, especially on the hard drive upgrades...
Purchased my Sawtooth back in Dec. 2006 on eBay. Should have been using it all of this time, but my budget wouldn't allow me to put more memory (it's got 256MB now) and a new hard drive in it. Tired of seeing it in the way just sitting there!
The G4 has OS X 10.3 on it. Would like to upgrade to Tiger. Is there a firmware update that needs to be done before upgrading to Tiger? I know that 256MB of memory really isn't enough for Tiger. I thought about getting at least a 512MB stick to make the total memory 768MB (wish I could afford to max the memory). Others have said that OWC and Crucial have good quality memory.
The System Profile shows that it has 10 GB and 60GB hard drives. Imagine the 10GB one is the original. The 60GB was probably added on later. Don't know how old the 60GB is. That's one reason I'd like to replace it to at least a 120GB drive, so I can start fresh without worrying about the 60GB dying. (Do understand that any drive can die; new or old...) Have read about the 128GB size limit on my G4. Don't think I'd use most of the 120GB, so I'd like to stay with that size. Budget won't allow to install a PCI card to allow larger drives anyway. Should I remove the 10GB one as I don't think I'd be using it at all?
I installed a Seagate 120GB Barracuda Ultra ATA/100, 7200RPM, 8MB Cache, 3.5" drive (new, got it on eBay for $40!) in my iMac G3 400. Would like to find the same kind of drive for the G4, if it would work. If the same drive would work in the G4, does anyone know where I could purchase one? Will look on eBay etc. in the meantime.
Thanks for any advice and/or suggestions.

Got the Seagate HD installed, PRAM battery replaced and missing PCI cover replaced. Sure wished that I had the extra memory to install now, but I haven't had the chance to order it yet. I know it's easy to do, but I'm going to have to move the Mac to the table and it's heavy for me to lift (bad back).
Anyway, I started to install OS 9 on the Seagate and have hit a stumbling block! Didn't have this problem when I replaced the HD in my iMac, but it was only a 120GB drive (it needed the firmware updated).
I've looked at other posts on installing OS 9 and even on Apple's support documents and can't find what I exactly need to do! Am getting more confused about it the more I try to find the right answers... Hope one of you can help me some more.
I was able to boot the Mac up from the CD (it's the white one with the orange "9" on it). I clicked on the "Mac OS Install" icon, click on "Continue" (on the "Install Mac OS 9) dialog box, and then it says: A valid destination volume can't be found. To continue the installation process, mount a valid volume for software installation." The destination disk options is grayed out. I then clicked on the "Utilities" icon, and then the "Drive Setup" icon. It shows a list of drives and I clicked on the <not initialized> Type ATA, Bus 2, ID 0, LUN 0 and clicked on the "Initialize" button. Then it says: New Partitioning: 1 Mac OS, Initialization Options: None. If you click on Custome Setup, it says that the Partioning Scheme is "Current Volume," 131072MB (131GB?), under Volume Info Type it says Mac OS Standard. The "OK" button is grayed out. If you click on "1 Partition" on "Partitioning Scheme," then the Volume Info Type says "Mac OS Extended, with Size showing 131071MB. The "OK" button is not grayed out. I didn't go any farther with the OS 9 installation, as I don't know what the heck I'm doing! Don't want to mess something up. Do you or anyone who has helped me with this posting, know the steps I should take next? The Seagate Owner's Manual says if you have a system that can't read the entire 160GB, to just partition the drive for 137GB for now if you don't want to add a PCI controller card etc. For now, all I want to do is use the 128 or 131GB (according to what it says) of the 160GB drive without using a different card or software to recognize all of the 160GB. Do I just do one partition or two... and what else? I'm completely lost...
Sorry for the long post, but had to write down the steps I took, so someone could tell me what to do next.
I don't think you have to worry about PRAM settings; they pretty much take care of themselves - and regenerate when they have to. The time to think about PRAM is when you introduce new hardware and catch your Mac expecting same old, same old, and it isn't.
It was kind of hard to get the old PRAM battery out of its holder. I pryed the right side retainer tab just a bit with a screwdriver to get it out. Noticed that one part of the retainer at the base was cracked! Hope I didn't do that! Put some super glue on the crack (was on the outside only from what I could see). Cleaned off the battery contacts with a pencil eraser and dry Q-tip before installing the new battery. It seems to stay in place even though with the side retainer cracked. If the side retainer would break off the next time the battery would need replacing, would the battery contacts hold it ok? Or would the whole logic board have to be replaced? I put a SAFT 3.6v LS14250 battery in it. The old one was a SAFT LS14250C. Hope the "C" at the end doesn't mean anything.

IPad won't sync with old iMac with new hard drive.

The new drive recognizes the iMac, and the photos on the iPad were successfully imported into iPhoto, but 2 home videos on the iMac will not transfer. I have tried to manually drag and drop, different cords and ports, over wi-fi, etc... The Summary box says the iPad has never backed up to this computer, but when I try to do that, it tries and then stops with no error message. The Movies tab has the two videos I want to transfer, but the sync button is gray. I have hard rebooted the iPad and restarted the iMac. Also deauthorized and reauthorized the iMac. I suspect that somehow the iPad is not recognizing the new hard drive. Is that possible? Any suggestions? Thank you for your help!

I don't mean the latest version of iOS. I mean the latest version of iTunes on your Mac.
Open iTunes on your Mac. Click Help and then Check For Updates

Need help buying new hard drive

I have a macbook that needs a new hard drive and need help knowing what hard drives to buy that will be compatible with it. It is a macbook pro 17inch model no: A1297.
Any help would be appreciated, Thanks

Any 2.5" diameter, 9.5mm thick SATA drive will be compatible. Currently they come up to 1.5 TB in capacity. I have a 1 TB Seagate SSHD (hybrid) drive installed in my primary MBP. The cost is a modest premium over a conventional HDD of the same capacity. Boot and shutdown times are significantly faster when compared to a conventional HDD, I can recommend this as an option.
If the bank account permits, an SSD will produce the overall maximum performance gains. Boot, shutdown and resource hungry applications will be noticeably faster. Casualyll use such as e-mails and text editing will produce no meaningful performance differences compared to a conventional HDD.
I am of the opinion that the cost premium is still too high for the benefits that they afford. Other have different views.
Ciao.

Need help with replacement hard drive

My hard drive has stopped working on this computer and since i only purchased it on 10/2012 I really don't want to replace it just yet. I am trying to buy a new hard drive but I would like a Seagate. I want to upgrade from 1 TB to 2TB. I was wondering if there is a Seagate product out there that would be compatable with the original hard drive but in 2 TB.The original hard drive is a HDD GNRC 1 TB SATA 3 ECO 7200 rpm 3.5". I was looking at a Seagate 2TB SATA 6.0 but I do not know is the SATA 6 will work with the original SATA 3. Can you please help me or guide me in the right direction for a replacement. I also have the HP recovery CD's coming to me in the mail.Thanks,GinaCee

Hi Big_Dave,Thank you for your help. I found this hard drive at Newegg and I was hoping you could tell me if it would be compatable.Seagate Barracuda ST2000DM001 2TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive Bare Drive. Or is there any Seagate product you could reccomend? I have a Seagate external hard drive and I like thier product, so I was hoping that they made something compatable for my HP. I will be installing this drive myself. I have all the instructions from the HP website and it doesn't look that difficult. Just waiting for my restore CD's and a replacement hard drive so I can start this project. Thanks again!Gina

Mac Mini won't book with new hard drives???

I have a late 2009 mac mini server running snow leopard server. I recently purchased 2 new hard drives as the I believe one of the hard drives was failing. I formatted the 2 drives and installed Mavericks OS X server on one.
When I put the 2 drives into the mac mini, the system won't boot. I just get the flashing folder. If I keep the old (snow leopard) drive in the system and connect the mavericks server disk as an external (USB connected) drive, it will boot and runs just fine.
Am I missing something??
Here are somethings additional facts:
When I have the snow leopard server drive in and it boots from that, it doesn't recognize either of the 2 new drives. Wants to either eject or initialize.
I realize that it can read the newer system.
I have to boot with the option key so that I can pick which drive to boot from.
Any thoughts would be helpful. I'm not sure why it works one way and not the other.
Thank you.

Did you set the Partition Map Scheme to GUID Partition Table before Formatting the Drives Mac OS Extended (Journaled)...?
You can check in a couple of places:
Apple > About This Mac > More Info > Hardware > Serial-ATA
Or in Disk Utility by highlighting the Drive and looking at the Drive info

Mediasmart software problem loading onto computer with new hard drive and operating system

My computer recently crashed and I had to buy a new hard drive and operating system. None of the programs from the old hard drive were saved. The computer is an HP Pavilion dv7-3165dx Entertainment Notebook and I have Windows 7 Professional (64x) as the operating system. Tried to download Mediasmart from the HP Web page to play DVD and Blu-Ray Discs. The programs downloaded but will not install. Any suggestions?

waynesworld57 wrote:
My computer recently crashed and I had to buy a new hard drive and operating system. None of the programs from the old hard drive were saved. The computer is an HP Pavilion dv7-3165dx Entertainment Notebook and I have Windows 7 Professional (64x) as the operating system. Tried to download Mediasmart from the HP Web page to play DVD and Blu-Ray Discs. The programs downloaded but will not install. Any suggestions?
Hi,
It looks like it's a common issue: http://h30434.www3.hp.com/t5/TX-TM-Series-Notebooks-Reply-Only/HP-Mediasmart-Software-package-for-Wi...
Try VLC as a multimedia player: http://www.videolan.org/vlc/download-windows.html
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Restoring computer with new hard drive & Logic Board using Time Machine

My MBPro totally crashed and just got it back from Apple with a new hard drive, logic board, optical super drive, one new 1GB ram chip, and a new video display panel. My questions are two fold, first, have I had so much replaced on this machine that I need to use Migration Assistant instead of Time Machine to restore it?
Second, If I am suppose to be using Time Machine, I'm having no success! My TM backups were done on a network drive via Airport Extreme with a HD attached to it. Through the Snow Leopard disk utility, I can access the partition with the backup on it, but then it hangs on "opening TM backup". After about a half hour, I had to do a hard shut down (no other option). I did this several times, same result. So the question is;
Can I plug the HD directly into my MBPro and restore it that way? I'm not sure if I can do this as I know the backups are different for hard wired and networked drives.
Or can I use an ethernet cable and plug Airport Extreme with the external drive attached into my laptop?
Thanks for any help!

Arlee wrote:
My MBPro totally crashed and just got it back from Apple with a new hard drive, logic board, optical super drive, one new 1GB ram chip, and a new video display panel. My questions are two fold, first, have I had so much replaced on this machine that I need to use Migration Assistant instead of Time Machine to restore it?
no. you can do a full system restore from TM using the restore utility on the snow leopard DVD.
Second, If I am suppose to be using Time Machine, I'm having no success! My TM backups were done on a network drive via Airport Extreme with a HD attached to it. Through the Snow Leopard disk utility,
snow leopard disk utility?? what exactly are you doing? disk utility is not involved in restoring from TM in any way.
I can access the partition with the backup on it, but then it hangs on "opening TM backup". After about a half hour, I had to do a hard shut down (no other option). I did this several times, same result. So the question is;
Can I plug the HD directly into my MBPro and restore it that way? I'm not sure if I can do this as I know the backups are different for hard wired and networked drives.
no, this is not how you should do it. connect the AEBS by ethernet. then boot from the snow leopard dvd and use "restore system from backup" from the Utilities menu. it will let you find the backup on the network and do a full system restore from it.
Or can I use an ethernet cable and plug Airport Extreme with the external drive attached into my laptop?
Thanks for any help!

Help with new hard drive

Similar Messages

Maybe you are looking for