Help with Nikon D600 NEF files, CS6, and ACR 7.3 beta

I have been unable to open NEF files from my Nikon D600 in Photoshop CS6, and ACR 7.3 beta.  Any suggestions/guidance would be much appreciated.
RAW was set to 14 bit color, but I can't see that that would matter?

From discussion with others, it would appear that the files were corrupted during transfer. 
I have some suggestions that I will try tomorow.
I have no problems opening old Nikon D700 NEF files in Photoshop CS6, and when ACR opens the file it indicates I'm using ACR 7.3 beta.
Regards,
Erich

Similar Messages

  • Question: Programs that work with Nikon D600 .NEF files

    I recently upgraded to the Nikon D600.  With that, I’m unable to open RAW images in the programs that I currently have (PS Elements 9).  Does Photoshop Elements 11 have the correct software (Camera Raw 7 and higher)?  Or will I need to get the full version Photoshop CS6?
    Thanks for any help you can offer!

    PSE11 will handle your NEF files but you will need to update immediately after installation using:
    Help >> Updates
    Also look at Lightroom 5. Unlike Elements it has all of the raw tools from CS6 in an intuitive interface designed for photographers by photographers.

  • Nikon D600 NEF files and Photoshop CS3

    Hi,
    I am using Photoshop CS3 and cannot upload Nikon D600 NEF files--obviously a gap between the two debuts.  Are there any suggestions, or am I stuck upgrading?
    Thanks

    You could get Lightroom 5, then output your files as tiffs to be opened in CS3.  I haven't used the standalone DNG converter, so I'm not sure if that gives you the option to save as a tiff also.  You could try the dng converter first to see if you can save as another file type, or use a legacy DNG version that is conpatable with CS3.

  • Will there ever be an upgrade for Lightroom 3 that will work with Nikon d800 NEF files?

    Will there ever be an upgrade to Lightroom 3 that will work with Nikon D800 NEF files?

    Why not use Lightroom 4 instead?
    I mean, assuming you can get it running fast enough, you'll usually get better results with PV2012 - right? And in the cases where you prefer PV2010 (if there are any), it's there too...
    R

  • Opening Nikon D600 NEF files using PhotoShop CS4 11.0.2 and ACR 5.7.0.213

    Hello,
    I've just bought a Nikon D600.
    I have Photoshop CS4 11.0.2 and ACR 5.7.0.213. 
    With these versions, I'm unable to open the D600 NEF files.  I get the following message:
    "Could not complete your request because it is not the right kind of document"
    Yet I can view the NEFs in other software that pre-dates the D600, e.g. FastStone Image Viewer 4.6.
    Does anybody know if I can get a plug-in from Adobe for PS CS4 that allows me to edit D600 NEFs?
    Many thanks for any help.
    Regards,
    Aisling

    Either upgrade to Photoshop CS6 or download the free DNG Converter and covert your NEFs to DNG.

  • New iMac vs a G5 1.8 with Nikon D2X NEF File Processing

    Hello all,
    I've been debating upgrading to a new iMac, and now with the 2.8 Extreme processor, my choice has been muddied a little, but I can't find any data anywhere if/how much faster it will be vs my old G5 processor. I'm probably not looking in the right places, but these forums have helped me in the past, so I thought I would turn to the Apple Illuminati.
    I process Nikon D2X NEF files in CS3, and currently the fastest I can do is about three per minute. . which is dreadfully slow, nevermind trying to make adjustments in ACR and seeing the results immediately. Strangely enough, it used to process almost 5 per minute with CS2, before upgrading to CS3, but that is another matter.
    Anyway, are there any users out there who can tell me how fast they are processing D2X NEF files with CS3 and using the new Intel processors?
    I look forward to hearing from any and every body. .
    Thanks!
    DL

    Bought a first gen Aluminum iMac with the 2.8ghz Extreme processor, and it is about four times faster processing Nikon D2x NEF files. . it screams!

  • LR/ACR color mismatch with Nikon D7000 NEF files

    I recently purchased the Nikon D7000. The NEF RAW files are not supported in current versions of LR and CS5.
    Downloaded and installed LR 3.3RC. Also downloaded and installed ACR 6.3R1.
    Both work with the D7000 NEF-files with ONE exception. If I shoot a "Multiple Exposure" (one feature of the D7000)  the resulting image in both LR and ACR displays in strong "pink"/magenta. All other images display correctly.
    If I open the pink images in Nikon Capture NX2 2.2.6 they open correctly.
    If I use the White Balance tool (pipette) in LR, I can bring the image back to "almost normal" but the WB values then are Temp: 2150, Tint: -138. Conclusion: the Multi Exposure Image from the D7000 is completely mismatched by LR/ACR. But they are correctly matched by Capture NX2.
    This obviously needs to be corrected before final release.
    Has anyone else expreienced the same? Is there a workaround?

    Can you please supply some sample .NEF images? You can use YouSendIt.com with a target email address of [email protected] Thanks.

  • Edit in Photoshop CS6 doesn't work with Nikon D800E NEF files in LR 4.1 RC

    The "Edit in Photoshop CS6" menu item or shortcut (cmd+e) doesn't work for NEF files from a Nikon D800E in Lightroom 4.1 RC.  What happens is that LR looks like it goes through all its normal paces, and launches Photoshop, and the CPU spins, but then nothing happens in Photoshop, the image never opens.
    This works fine for NEF files from other cameras.

    Set up CS6 as an secondary editor, and then it will use LR's built-in ACR to process the files, instead of the external ACR with CS6. The external ACR 6.7 also processes D800, just not ACR 7 just yet.
    Bob Frost

  • How to read Nikon D600 NEF files

    I bought a Nikon D600 but am unable read the NEF files read with my version of Lightroom 3 that runs on an older Mac Book which cannot be upgraded to LR4.  If I buy a new Mac, can I upgrade to LR4 on the new machine or do I have to purchase a new version?  If I can upgrade how do I transfer LR3 to the new machine.  Also, I have a student version of Photoshop CS5 Extended.  Can I purchase an upgrade to CS6 on a new machine? 
    In doing research I saw where both Lightroom 4 and Photoshop CS6 had some problems with Apple's OS X 10.8.  Have these been resolved yet?

    The D600 is diectly supported by Lightroom 4.2/Camera Rw 7.2 and higher.  So updgrading to Lightroom 4 or Photoshop CS6 will provide full suppor for the D600. Alternatively, you can download the free DNG Converter 7.2 or higher and use it to convert your NEF files to DNG format which is already supported by Lightroom 3.x
    You can upgrade from Lr3 to Lr4 on your old and/or new machine as there is no activation code to stop you. You'll probbaly be asked for the Serial Number for Lr3 on the new machine to prove that an upgrade is legitimate. Buying Photoshop CS6 then upgrading the new machine to this is also possible, but you'll need either the DVD for CS5 or have it already installed on the new machine. Basically, CS6 needs to see that a copy of CS5 is available for installation or already on the computer.
    As to the problems with 10.8. These have been addressed.
    Download link for DNG converter 7.3 http://www.adobe.com/support/downloads/detail.jsp?ftpID=5518
    Download link for Lr 4.3 http://www.adobe.com/support/downloads/detail.jsp?ftpID=5520

  • Nikon D600 NEF file import problems

    Hi,
    Lr won't import NEF files from my nikon d600 even though i've upgraded my software to Lr 4.41 and camera raw 7.4, which according to what i have read on the web, should be enough. 
    Has anybody got any ideas / encountered this problem themselves before?
    Thanks in advance!

    It was my understanding as well, that the latest Lr4 would support those D600 files. I would consider trying with Lr5.2 trial as a test, or converting to DNG prior to import, as a test...
    But maybe first: Copy (using OS, not Nikon Transfer) from card to hard disk, then try adding in place. - works?
    R

  • Bridge 2.1.1.9 problems with Nikon D300 NEF files

    I am getting a few Raw files from my Nikon D300 that will appear properly in Bridge, but the majority either don't show a preview at all or are very pixelated in appearance. The ones that do appear fine can be opened in ACR by right clicking and selecting "open in camera raw". However, the others that don't appear properly don't even show the option to open in camera raw. Yet the files are okay, because I can then open them from within Photoshop and process the files like that. The other odd behavior is that if I right click the thumbnail and rename the file then the thumbnail preview suddenly appears properly. Lastly, the pixel dimensions show incorrectly until the file is renamed.
    I am using Windows XP SP2 with Photoshop CS3. Any suggestions would be appreciated. This has been very frustrating because initially it appears that the file may be corrupt.
    Thanks!

    This might not be helpful as I do not know why but .. I have a D300, and while Bridge is its usual flakey self, it has worked fine with the file formats. I tried all the combinations of compression and 12/14 bit and bridge sees them.
    I do have cache weirdness, where it seems to reprocess them repeatedly, as though it is forgetful, but it does process and resolve them.
    I've experimented with the "high quality previews" on and off, and when off the quality is definitely lower. Secondly if it is processing (or reprocessing) its cache, I see weirdness in the display where it may not display the quality preview either for a very long time, or not at all. But generally I've had no luck getting bridge to be usable while it processes its cache for a directory, I just let it finish and then use it.
    However none of these flaky issues have been D300 specific, and been using it for a couple months now, and also with a D80 from my wife, no difference.

  • Problem with NIKON D600 RAW files

    I have had a new NIKON D600 for 6 months. The RAW files have worked well all this time. However, I recently took the camera in for repair. Upon its return the Adobe Essentials 11 catalague and editor no longer recognizes the RAW files created by the camera. However, those files are still recognized by the Nikon software ViewNX2. Since I use the Adobe program all the time for manipulating the files I need RAW access.
    I called Nikon and they told me it must be an Adobe software problem. But the Adobe software recognized the files up the time of the camera repair.
    What can I do about this?

    Hi,
    How do you get the images from the card to the PSE catalog?
    There are known problems when using older version of the Nikon software to download the images. Have you tried updating the Nikon software?
    The D600 needs ACR 7.3. You haven't recently re-installed PSE 11 and not done the updates have you?
    What version of camera raw is installed (Editor -> Help -> About Plug-in -> Camera Raw)?
    Can you still open the older D600 images that you took before the camera was repaired?
    What operating system are you using?
    Brian

  • [Consolidation-Locked] Nikon D600 NEF files in Lightroom 4

    Is there an update for Lightroom 4 to accept NEF RAW files for Nikon D600?
    Message title was edited by: Brett N

    Lightroom 4.2 has been released, which provides support for the Nikon D600. In Lightroom, go to Help > Check for Updates to download.
    Please see: http://forums.adobe.com/message/4785056

  • New Nikon d600 NEF files not supported by Elements9

    I have a question, my old Nikon d3000 and photoshop elements9 had worked great together.  Now I upgraded my camera to the Nikon d600 and the RAW files are not supported by it... Any suggestions how to resolve this?

    The D600 only gets full support in version 7.3 which is out of beta testing and now available as a release candidate. You may want to wait for the final version of camera raw 7.3 which will be available shortly. Alternatively download the release candidate now but make a not to update when the final version is released.
    Adobe Labs Downloads click here DNG Converter 7.3 RC
    You can convert a whole folder of NEF images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Nikon D600 Nef files

    Hi,
    I am unable to read teh NEF files from my Nikon D600 in Elements 9, I have tried installing patches to get this working.
    I then tried installing a trial of Elements 11 but still no joy
    Dave

    PSE11 will read D600 raw files if you update the Camera Raw plug-in to ACR 7.3 using Help / Updates, if the trial allows that.
    You might also try the direct-download installers:
    http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected

Maybe you are looking for

  • TRYING TO DOWLOAD ITUNES BUT NOTHING DOWNLOADS. IT JUST SAY THANKS FOR DOWN LOADING ITUNES

    TRYING TO DOWNLAD ITUNES ON MY NEW DESKTOP COMPUTER. I ENTER MY EMAIL AND PUSH DOWNLOAD. A PAGE COMES UP AND SAYS THANKS FOR DOWNLOADING ITUNES BUT NOTHING DOWNLOADS.

  • External definition error

    I am trying to import the following XSD as an External Definition in Repository. I am getting the following Error. Please help me. Error Activation of the change list canceled Check result for External Definition Request | http://ABC.COM: Document ch

  • SAP Netweaver 04 full version on Notebook?

    Hi! Is it possible to install a "full version" of SAP Netweaver on a High end Notebook including the following components: EP60 Developer Studio XI Web AS 640 Java Stack Web AS 640 ABAP Stack Visual Composer (BI 3.5) What are the HW/SW Requirements a

  • Failed to erase dvd rw

    failed to erase dvd+rw

  • Opening JPEG images in ACR

    I read in a library book that I can work with JPEG images  in ACR by going to file >Open as selecting image and choosing the camera raw option. However the selected image appears in the main editing space, not in camera raw. I`m using elements 10 wit