Help with Noika N73 Full Screen Wllpaper?

Hi there all i am new to this forum. I am glad I have found this because it is a huge help for people who love their Nokia's lol.
I have a problem with my nokia n73.
Phone Details:
Model: Nokia N73
Version: v 3.0704.1.0.1
RM-133.
I have just had this phone sent back from nokia. They reported it had a software problem which is now resolved. I am unable to use my Pictures and a Full Screen Wallpaper.
All help is much appreciated
Many Thanks
Jassi

ok. now you should take a picture from your camera LARGE picture--select it from camera settings and then set it as wallpaper. this is not at all a software issue. its just got something to do with your picture size.
try downloading pictures from the net specific to your n73 phone screen size and they will work out best !
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

Similar Messages

N73 - Full-Screen MMS attachments?

My friend and I both have N73s (music editions), and in the past have been able to send photo messages via MMS and be able to view the attached picture in Full-Screen using the relevant option.
Now when we do it (and it's happening both ways) the photos are very small and have a large white border around them. We're both with Orange on contract. Is there anything obvious happening or something to check to get this back to how it was? We've checked the camera settings and they're both on High Quality (print).
Any help greatly appreciated.

ok. now you should take a picture from your camera LARGE picture--select it from camera settings and then set it as wallpaper. this is not at all a software issue. its just got something to do with your picture size.
try downloading pictures from the net specific to your n73 phone screen size and they will work out best !
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

Duel Monitor issue with video in full screen mode

Hi, im not sure if this is the right forum but here is my question
I have an external monitor connected to my MacBook Pro 13" model...i want to be able to have a video in full screen on my external monitor but still use my laptop to do work and browse the web
However, ever time i put it in full screen mode it blackens my laptop screen
how do i stop this from happening

I've tried moving the menu bar to the monitor...didnt work
ive tried playing the video on my mac but it just blackens the monitor
What do you mean by the adaptor - i have what ever software etc that came with the mac...and then from apple i bought the mini display port to VGA adaptor...the monitor is a new LG W2261 Full HD...currently i am connect via the blue VGA cable
it works if im playing games full screen...i just have to move the menu bar in the arrangement option...but it doesnt work for videos
i havent tried another monitor cos i dont have one - but i did try another account and its the same effect
surely it should be simple - what if i was to do a powerpoint presentation connect to a TV or projector, normally you can see your screen for the separate controls which the other displays the presentation

Aperture screwing with brightness in full screen mode

For some reason whenever I go into full screen mode Aperture keeps adjusting the brightness of my images. Every time I do anything it first looks "normal" then the brightness gets jacked up a few percentage points. When I turn on the Loupe, the image shown inside the loupe is darker (as it should be) as this odd "auto brightness" effect doesn't show up there. When not in full screen mode this doesn't happen. Saving the photo results in the correct image as well. So long story short this is only happening in full screen mode.
I tried disabling the "On screen proofing" but it doesn't seem to have an effect. This is driving me nuts because I have no way to see the ACTUAL image until I save it! Thanks for any ideas you may have.

Another update: I changed my external display to "default" in ColorSync Profiles as recommended in another thread, still have the same problem.
I have now noticed that this phenomenon only occurs when the image being displayed on screen has to be scaled down to fit - so apparently there is something going on with Aperture's image preview being created on the fly?

Problem with Cover Flow full screen view in 10.6

I like to use the Cover Flow full screen view in iTunes on my monitor. Since upgrading to iTunes 10.6 Cover Flow full screen view will revert to Cover Flow standard view between each song. This did not occur with any previous version of iTunes. Is there a setting that will prevent Cover Flow automatically switching back to standard view from full screen view?

I guess I am the only one experiencing this issue of Cover Flow full screen view collapsing to standard view when a song within an album or playlist changes. This began in 10.6 and has continued in 10.6.1. At least I have not experienced the more serious issues others have with 10.6.

Help with icon on n85 screen

Hi all.
Looking for help with an icon that appears at near the top left corner of my n85 screen (I'm new to S60's). It appears when I'm either in a call using the keypad to dial a number. Sometimes it's a small arrow/triangle in an orange/red background and other times it's a green background.
Does this have anything to do with call diverts?? Tried googling and the forums but can't find anything.
Thanks everyone.
J.

kali,
that will come up to show you when you have something Java running. To close out of that once it is open, is to close out of all of your browser (IE for example) windows to reset the Java runtime environment.
MT

Help with Refreshing and Calling Screens

Hi everyone. I have somewhat of a simple ABAP program in which the user will enter data on Selection-Screen 1000. This will then be loaded into an Object Oriented ALV Grid for display purposes only (screen 0100). At any time, the user may use the back button on the ALV Grid Screen; which will take them from screen 0100 to screen 1000(Selection Screen). Lets assume the user does not want to go back to the original selection screen from the ALV Grid Screen; they entered the information correctly and want to continue processing using a custom button I've created which will continue to process the record of data into a BW ODS. This process works, but now I would like to use the write statement once the custom button is clicked to show a summary of the data I am inserting into the ODS after the data has been inserted. The problem is, the title of the ALV Grid still shows and the Write statement is processed, but not shown on the screen. I've been trying to refresh the screen with set screen and call screen combinations, but no luck. Any Help would be appreciated. Thanks!
Here is a sample of the code below:
*& Report ZINC_DSP_SALES_INCRASE
REPORT ZINC_DSP_SALES_INCREASE MESSAGE-ID zsm.
INCLUDE <icon>.
DATA: credit_itab type standard table of /bic/azincosvi00,
 wa_credit like line of credit_itab,
 alv_itab type standard table of /bic/azincosvi00,
 wa_alv like line of alv_itab.
DATA: ok_code LIKE sy-ucomm,
 save_ok LIKE sy-ucomm,
 incent type table of /bic/azincosvi00,
 g_container TYPE scrfname VALUE 'Increase DSP Sales',
 grid1 TYPE REF TO cl_gui_alv_grid,
 gs_layout TYPE lvc_s_layo,
 g_custom_container TYPE REF TO cl_gui_docking_container.
DATA: active_guid like /bic/mzguid_dsr,
 UNIQUEKEY LIKE /BIC/AZINCOSVI00-/BIC/ZRCRDKEY,
 rpt_per_rec like /BIC/MZRPTPRDCR,
 dsrcode like /bic/mzdsrcode-/bic/zdsrcode,
 payrec like /bic/mzsubcode.
CLASS lcl_event_receiver DEFINITION DEFERRED.
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
 METHODS:
 handle_toolbar
 FOR EVENT toolbar OF cl_gui_alv_grid
 IMPORTING e_object e_interactive,
 handle_user_command
 FOR EVENT user_command OF cl_gui_alv_grid
 IMPORTING e_ucomm.
 PRIVATE SECTION.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION.
This will create the toolbar
METHOD handle_toolbar.
 DATA: ls_toolbar TYPE stb_button.
 CLEAR ls_toolbar.
 MOVE 3 TO ls_toolbar-butn_type.
 APPEND ls_toolbar TO e_object->mt_toolbar.
append an icon to show booking table
 CLEAR ls_toolbar.
 MOVE 'CREATE' TO ls_toolbar-function.
 MOVE ICON_OKAY TO ls_toolbar-icon.
 MOVE ' ' TO ls_toolbar-disabled.
 APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'CREATE'.
Insert /bic/azincosvi00 from wa_credit.
CALL METHOD grid1->free.
SET SCREEN '200'.
WHEN 'OTHERS'.
" DO NOTHING
ENDCASE.
ENDMETHOD.
ENDCLASS.
Data: event_receiver TYPE REF TO lcl_event_receiver.
START-OF-SELECTION.
Selection-Screen BEGIN OF BLOCK 1 with frame title text-001.
Parameters: start like /bic/azincosvi00-BILL_DATE.
Selection-Screen END OF BLOCK 1.
Selection-Screen BEGIN OF BLOCK 3 with frame title text-003.
Parameters: guid type /BIC/OIZGUID_DSR,
 pcode type /BIC/OIZPGMCODE,
 scode type /BIC/OIZSUBCODE,
 reason type /BIC/OIZEXCPTC,
 quantity(5) type n,
 discount type /BI0/OISUBTOTAL_4.
Selection-Screen END OF BLOCK 3.
END-OF-SELECTION.
IF quantity <> '00000'.
 if pcode <> 'SCTMS'.
 message e000 with 'Quantity can only be used with seating spiff'.
 endif.
ENDIF.
GET REPORT PERIOD INFO using today's date.
select single * from /bic/mzrptprdcr INTO rpt_per_rec
 where calyear = sy-datum(4)
 and /bic/zpgmcode = pcode
 and ( /BIC/ZRPPRDSTR <= start
 and /BIC/ZRPPRDEND >= start ) .
if sy-subrc <> 0.
 message e000 with
 'Report Period NOT FOUND for' pcode ' ' sy-datum(4).
endif.
Select Active Guid based upon user entry on selection-screen
Select single * from /bic/mzguid_dsr into active_guid
 where /bic/zguid_dsr = guid
 and /bic/zdsrstat = 'A'.
 If sy-subrc <> 0.
 MESSAGE e000 WITH 'Please enter a valid GUID'.
 ENDIF.
Select DSR Code based upon a valid guid entered
Select single /bic/zdsrcode from /bic/mzdsrcode into dsrcode
 where /BIC/ZGUID_DSR = guid
 and /BIC/ZDSRCDST = 'A'.
 If sy-subrc <> 0.
 MESSAGE e000 WITH 'GUID entered does not have an active dsr code.'.
 ENDIF.
Select MAX( /BIC/ZRCRDKEY ) FROM /BIC/AZINCOSVI00 INTO WA_CREDIT-/BIC/ZRCRDKEY.
UNIQUEKEY = WA_CREDIT-/BIC/ZRCRDKEY + 1.
WA_CREDIT-/BIC/ZRCRDKEY = UNIQUEKEY.
WA_CREDIT-PO_NUMBER = UNIQUEKEY.
WA_CREDIT-/BIC/ZERDAT = SY-DATUM.
WA_CREDIT-BILL_DATE = SY-DATUM.
WA_CREDIT-/BIC/ZRPPRDSTR = rpt_per_rec-/BIC/ZRPPRDSTR.
WA_CREDIT-/BIC/ZRPPRDEND = rpt_per_rec-/BIC/ZRPPRDEND.
WA_CREDIT-/BIC/ZCUBPRCDT = SY-DATUM.
WA_CREDIT-/BIC/ZRPTPRDCR = rpt_per_rec-/BIC/ZRPTPRDCR.
WA_CREDIT-/BIC/ZINCPYPRC = '00000000'.
WA_CREDIT-/BIC/ZGUID_DSR = ACTIVE_GUID-/bic/zguid_dsr.
WA_CREDIT-/BIC/ZDSRCODE = dsrcode.
WA_CREDIT-/BIC/ZPGMCODE = PCODE.
WA_CREDIT-/BIC/ZUNASSIGN = 'N'.
WA_CREDIT-/BIC/ZSUBCODE = SCODE.
WA_CREDIT-/BIC/ZSITE_ICR = ACTIVE_GUID-/BIC/ZSITE_IRG.
WA_CREDIT-/BIC/ZSUSPEND = 'N'.
WA_CREDIT-/BIC/ZSUSPNDR = ' '.
WA_CREDIT-/BIC/ZSITE_IRG = ACTIVE_GUID-/BIC/ZSITE_IRG.
WA_CREDIT-/BIC/ZSITE_CST = ' '.
WA_CREDIT-/BIC/ZINCBONUS = '0.00'.
WA_CREDIT-STAT_CURR = 'USD'.
WA_CREDIT-DOC_CURRCY = 'USD'.
WA_CREDIT-SALES_UNIT = 'ST'.
WA_CREDIT-CALYEAR = SY-DATUM(4).
WA_CREDIT-/bic/ZCASEID = SY-UNAME.
WA_CREDIT-/bic/ZSLSRSN = REASON.
WA_CREDIT-RECORDMODE = ' '.
*Depending on Program Code, populate the amounts to be paid.
Data: fivepercent type p.
 fivepercent = '0.05'.
If pcode = 'SCW5S' or pcode = 'SCTMS'.
Select single * from /bic/mzsubcode into payrec
 where /bic/zpgmcode = pcode
 and /bic/zsubcode = scode
 and CALYEAR = sy-datum(4).
 if sy-subrc <> 0.
 write: / '************** ERROR ***********************',
 / '** Missing Program Information for ',
 / pcode,
 scode,
 sy-datum(4),
 exit.
 endif.
ENDIF.
If pcode = 'SCW5S'.
WA_CREDIT-/BIC/ZINCUSDDS = discount.
WA_CREDIT-/BIC/ZPAYAMTUS = WA_CREDIT-/BIC/ZINCUSDDS * payrec-/bic/zpayper / 100.
WA_CREDIT-SUBTOTAL_4 = discount.
WA_CREDIT-/BIC/ZINC_QTY = ' '.
Endif.
If pcode = 'SCTMS'.
WA_CREDIT-/BIC/ZPAYAMTUS = quantity * payrec-/bic/zpayper / 100.
WA_CREDIT-/BIC/ZINCUSDDS = '0.00'.
WA_CREDIT-SUBTOTAL_4 = '0.00'.
WA_CREDIT-/BIC/ZINC_QTY = quantity.
Endif.
If pcode = 'SCTB'.
WA_CREDIT-/BIC/ZPAYAMTUS = '0.00'.
WA_CREDIT-/BIC/ZINCUSDDS = DISCOUNT.
WA_CREDIT-SUBTOTAL_4 = DISCOUNT.
WA_CREDIT-/BIC/ZINC_QTY = ' '.
Endif.
*Create ALV Grid to show the user what the record will look like in which they are creating.
Append wa_credit to alv_itab.
CALL SCREEN 100.
*& Module PBO OUTPUT
 text
MODULE alv_pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
 CALL METHOD grid1->set_table_for_first_display
 EXPORTING
 i_structure_name = '/bic/azincosvi00'
 CHANGING
 it_outtab = alv_itab.
 CREATE OBJECT event_receiver.
 SET HANDLER event_receiver->handle_user_command FOR grid1.
 SET HANDLER event_receiver->handle_toolbar FOR grid1.
 CALL METHOD grid1->set_toolbar_interactive.
ENDIF.
ENDMODULE. " PBO OUTPUT
*& Module PAI INPUT
 text
MODULE alv_pai INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
 WHEN 'CANCEL'.
 LEAVE PROGRAM.
 WHEN 'BACK'.
 CALL METHOD grid1->free.
 CALL SELECTION-SCREEN '1000'.
 WHEN OTHERS.
 " DO NOTHING.
ENDCASE.
ENDMODULE. " PAI INPUT
*& Module 200_PBO OUTPUT
 text
MODULE 200_PBO OUTPUT.
Write at 5: 'Increase DSP Sales'.
Skip 1.
Write at 5: 'USER'.
Write at 15:'PROGRAM CODE'.
WRITE AT 25:'SUB CODE'.
WRITE AT 37:'DISCOUNTED SALES'.
WRITE AT 67:'PAY AMOUNT US'.
WRITE AT 80:'REASON'.
ENDMODULE. " 200_PBO OUTPUT

There are some problems with ok_code, you need to assign sy-ucomm at each module. Also the main problem was that you needed leave to list-processing and suppress dialog before writing. However, when you do this the screens calls change a little. You also needed to use the container correctly. Apply the correctons below and you'll be all set. Unfortunaley you will have to play around with calling the sel. screen (1000) from screen 100, I don't think call sel. screen 1000 will work properly there (you might need a custome screen instead). The user may be okay with kicking back out to sa38 after the alv display, however. Good luck and don't listen to the clowns' comments above. I once worked in that circus, Hey Guys.
Instead of this:
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'CREATE'.
Insert /bic/azincosvi00 from wa_credit.
CALL METHOD grid1->free.
SET SCREEN '200'.
WHEN 'OTHERS'.
" DO NOTHING
ENDCASE.
ENDMETHOD.
DO THIS:
METHOD handle_user_command.
 CASE e_ucomm.
 WHEN 'CREATE'.
 Insert /bic/azincosvi00 from wa_credit.
 CALL SCREEN 200.
 WHEN 'OTHERS'.
 " DO NOTHING
 ENDCASE.
ENDMETHOD. "handle_user_command
Instead of this:
*Create ALV Grid to show the user what the record will look like in which they are creating.
Append wa_credit to alv_itab.
CALL SCREEN 100.
DO THIS:
IF g_custom_container IS INITIAL.
 CREATE OBJECT g_custom_container EXPORTING dynnr = '100'
 repid = sy-cprog
 ratio = '95'.
ENDIF.
IF grid1 IS INITIAL.
 CREATE OBJECT grid1 EXPORTING i_parent = g_custom_container.
ENDIF.
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_user_command FOR grid1.
SET HANDLER event_receiver->handle_toolbar FOR grid1.
SET SCREEN 100.
CALL SCREEN 100.
Instead of this:
MODULE alv_pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_structure_name = '/bic/azincosvi00'
CHANGING
it_outtab = alv_itab.
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_user_command FOR grid1.
SET HANDLER event_receiver->handle_toolbar FOR grid1.
CALL METHOD grid1->set_toolbar_interactive.
ENDIF.
ENDMODULE. " PBO OUTPUT
DO THIS:
MODULE alv_pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
CALL METHOD grid1->set_table_for_first_display
EXPORTING
 i_structure_name = '/bic/azincosvi00'
CHANGING
 it_outtab = alv_itab.
CALL METHOD grid1->set_toolbar_interactive.
ENDMODULE. " PBO OUTPUT
Instead of this:
MODULE alv_pai INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE PROGRAM.
WHEN 'BACK'.
CALL METHOD grid1->free.
CALL SELECTION-SCREEN '1000'.
WHEN OTHERS.
" DO NOTHING.
ENDCASE.
ENDMODULE. " PAI INPUT
DO THIS:
MODULE alv_pai INPUT.
ok_code = sy-ucomm.
CASE ok_code.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
 WHEN 'CANCEL'.
 LEAVE PROGRAM.
 WHEN 'BACK'.
 CALL METHOD grid1->free.
 LEAVE PROGRAM.
* CALL SELECTION-SCREEN '1000'.
 WHEN OTHERS.
 " DO NOTHING.
ENDCASE.
ENDMODULE. " PAI INPUT
Instead of this:
MODULE 200_PBO OUTPUT.
Write at 5: 'Increase DSP Sales'.
Skip 1.
Write at 5: 'USER'.
Write at 15:'PROGRAM CODE'.
WRITE AT 25:'SUB CODE'.
WRITE AT 37:'DISCOUNTED SALES'.
WRITE AT 67:'PAY AMOUNT US'.
WRITE AT 80:'REASON'.
ENDMODULE. " 200_PBO OUTPUT
DO THIS:
*Take care of all your list output here
LEAVE TO LIST-PROCESSING.
SET PF-STATUS 'MAIN200'.
SET TITLEBAR 'MAIN200'.
SUPPRESS DIALOG.
WRITE AT 5: 'Increase DSP Sales'.
SKIP 1.
WRITE AT 5: 'USER'.
WRITE AT 15:'PROGRAM CODE'.
WRITE AT 25:'SUB CODE'.
WRITE AT 37:'DISCOUNTED SALES'.
WRITE AT 67:'PAY AMOUNT US'.
WRITE AT 80:'REASON'.
ENDMODULE. " 200_PBO OUTPUT
Add Moule:
MODULE 200_pai INPUT.
ok_code = sy-ucomm.
CASE ok_code.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
 WHEN 'CANCEL'.
 LEAVE PROGRAM.
 WHEN 'BACK'.
 CALL SCREEN 100.
 WHEN OTHERS.
 " DO NOTHING.
ENDCASE.
ENDMODULE. " 200_PAI INPUT

Making a Pages document compatible with Word and Full-screen view

Hi there! I would like to know if it is necessary to have Microsoft Office installed on my computer in order to be able to save a Pages document as "Microsoft Word" compatible. As of now, when I select the "Save As" option, I'm only able to save my document as a iWork 06 and 05 file. Also, I've noticed that on the video tutorials online, there is a "full-screen" mode and I was wondering if it was available on iWork 08, or if it is only for iWork 09. Thank, and sorry if these questions have been answered before!

Welcome to Apple Discussions
No, you don't need Office installed. That's the whole idea. Go to File > Export & choose Word (or text, rtf or pdf). The option to "save as" Word has been added in Pages 4/iWork '09 as well as in export.

Help with setting up full width site?

Hello!
I'm new, Been following a lot of videos. I'm mainly interested in creating a full width or full screen parallax site like:
http://leicastorela.com/
I'm getting stuck on the initial NEW SITE DIALOG. I'm setting 1100 as width, 500 as height. I've zeroed out the gutters, padding etc. But when I preview I still get gray bars on the side? See screen shot.
What should I set the NEW SITE parameters as to achieve the full screen look? Thank you
PS: I even tried extending the menu bar all the way past the gray bars, same results. I'm on 7.3. I notice when I stretxh the black bar to the edge it does not say 100%? I think I'm on the latest version. I know that feature is new?

When you want to create a full sceen effect you have to extend your object/image outside the page size to the
ends of the grey area. See attached image.
Make sure you see the red lines appear on each side of the page when you extend your artwork to the edge.
This effect works for base objects for photos make sure you have "scale to fill" marked when inserting
it in a box.

Help with fitting text in screen

Could anyone help me with figuring out how I can get the full
page of the Webkinz home page to fit on the screen with Adobe Flash
Player 9? Is there another program to allow it to fit on the
screen? Minimizing the screen size does not work.

Could anyone help me with figuring out how I can get the full
page of the Webkinz home page to fit on the screen with Adobe Flash
Player 9? Is there another program to allow it to fit on the
screen? Minimizing the screen size does not work.

Help with moving between custom screens in a Standard Transaction

All,
I'm working with a standard transaction, but in this transaction, the I'm having 2 tabs of customized screens. In each of the screen, I have 1 mandatory fields to be filled. If the user only fill in the mandatory field of the first screen and click save, I need to display an error message and also display the second screen automatically? How can I do this? I tried to use CALL SCREEN 9200 but the system keep displaying the error "Screen SAPLXQQM 9200 must not be in Include screen".
Can anyone help me on this one? Thanks in advance.

You must don't calling screen 9200. I mean delete lines code
CALL SCREEN 9200.
from your program.
This code can be placement in screen fiew logic only!
Instead, set code of needed tab of tabstrip using FM. Program process this command and automaticly call tab with your 9200-subscreen.

Help with stop sign on screen - please!

My hard drive has packed up and I have a new one which I have formatted on another G5.
When I start up now I get a folder with a flashing question mark in it.
If I insert my copy of panther then the disk spins and the screen goes to the apple grey screen, but then comes up with a stop sign and I can't proceed any further.
I have tried holding down C when booting up and also alt which brings up a blue screen which shows the osx disc but then it just goes to the stop sign when I proceed.
Please help, why won't the operating system load on?
Because the old hard drive is broken, I only have internet at work.

Hi Kevin, and a warm welcome to the forums!
While you may get help or a solution here, It's quite acceptable to start a new topic of your own, certainly feel free to start a new topic to attract more helpers to your particular situation, here's a link if as is often the case, it's hard to find out where to do it...
http://discussions.apple.com/post!default.jspa?forumID=596
Or the iMac G5 forum where I don't hang out, but many hood helpers there...
http://discussions.apple.com/post!default.jspa?forumID=134
The we are hanging here is a Kernel Panic, usually in your situation a wrong Install Disc, bad Disc, or bad Reader.
Do you have another Mac with Firewire around?

Need Help With Pantech Crux Touch Screen

I don't know if this is the right forum, 95% of the forums seem to be for billing or arbitray things. So, if this isn't please refer me to the correct place for this post.
I have had a Pantech Crux for about 6 months now. About three months ago, the touchscreen stopped working. A section right in the middle refused to allow me to press it. If you were looking at the keyboard, it is the RTYGH section of the phone. It clicks way off to the right, or refuses to click at all. Now, 3 months ago a friend made a suggestion that I wait until the battery died and just restarted. Once I did this, it worked fine, and I chocked the issue up to software.
Now, it has been plaguing me for three weeks, I have let my phone uncharge to zero, erased the entire thing and set the phone to factory settings, I have attempted to clean the screen using certified safe cleaner, all to no avail. What I need to know, from anyone, is A) is this a possible software fix that I can fix? B) if the screen is broken, how much am I looking at to get it fixed?
Honestly, I am beginning to think the pantech curx being listed at near 300.00 without a 2 year warranty is ludicrous and borderline highway robbery. I've enjoyed this phone for the last three months, but if this keeps up the temptation to literally rip it in half and go get a NET10 phone will be too much to withstand. Honestly, I can't text, I can't use the calculator, or any programs. Any and all help would be most appreciated.

lpseudonyml wrote:
I don't know if this is the right forum, 95% of the forums seem to be for billing or arbitray things. So, if this isn't please refer me to the correct place for this post.
I have had a Pantech Crux for about 6 months now. About three months ago, the touchscreen stopped working. A section right in the middle refused to allow me to press it. If you were looking at the keyboard, it is the RTYGH section of the phone. It clicks way off to the right, or refuses to click at all. Now, 3 months ago a friend made a suggestion that I wait until the battery died and just restarted. Once I did this, it worked fine, and I chocked the issue up to software.
Now, it has been plaguing me for three weeks, I have let my phone uncharge to zero, erased the entire thing and set the phone to factory settings, I have attempted to clean the screen using certified safe cleaner, all to no avail. What I need to know, from anyone, is A) is this a possible software fix that I can fix? B) if the screen is broken, how much am I looking at to get it fixed?
Honestly, I am beginning to think the pantech curx being listed at near 300.00 without a 2 year warranty is ludicrous and borderline highway robbery. I've enjoyed this phone for the last three months, but if this keeps up the temptation to literally rip it in half and go get a NET10 phone will be too much to withstand. Honestly, I can't text, I can't use the calculator, or any programs. Any and all help would be most appreciated.
Hi lpseudonyml,
I am sorry to learn that your phone is not working properly; I would be frustrated if I had the issues outlined on your post with my phone. Since you have already done several troubleshooting steps including a factory reset, I would consider replacing the phone. The best part is that your phone is only 6 months and is still within the one year manufacturers warranty and can be replaced at no cost to you. Please keep in mind that if phone has sustained liquid damage or physical damage the warranty is voided and phone cannot be replaced for free by the warranty program. For details on processing your warranty replacement please visit the link below:
Certified Like-New Replacement Warranty Program
If your phone does not qualify for a warranty replacement due to liquid or physical damage you can get a Certified Pre-Owned phone at a discounted price. Please visit link below for details:
Certified Pre-Owned Replacement Program

Please help with bypassing bootup selection screen. MB:MSI Z68A-GD80

Hi Guys,
I was wondering if you could help me bypass the boot-up selection choices screen and go directly into Windows.
My MB is MSI Z68A-GD80. I want to remote control this pc, but with the selection boot option screen keeps coming up after rebooting, it might not work.
Is there a setting somewhere to disable this and go directly to Windows? I tried different setting in the Setting menu, but not working.
Thanks in advance!
Rich

Enter BIOS 'Settings', 'Boot', enter (red arrow) UEFI & disable, enter & either leave alone or disable as to preference (blue arrow), USB HardDisk set as desired, etc. Then, in the 'Boot Option Priorities' (white arrow pointing at 1 thru 8 boot list in this example), start at the bottom & disable as you go upward until you have only set for #2 as example, CD/DVD drive, & for #1 boot device, your OS HDD. Hit the 'F10' key & the 'Enter' key & it should be set correctly to what you want.

Help with adjusting Objects on screen

I am making a Flash website and I need to know how to make my Menu on left and Logo on right stay on left and right
as the screen size is changed. A similar example I am trying to accomplish is this well know site.
http://cornerstonesimi.com/
Notice how the menu and logo stay on the right and left...I have been searching for days on how to do this.
I have everything built on my stage but cannot achieve this and thought someone may be familiar with this technique.
Thanks!

adjust your publish settings to 100% x 100% (file/publish settings/html).

Help with Noika N73 Full Screen Wllpaper?

Similar Messages

Maybe you are looking for