Help with Noisy Photos when reopening

Hi there, I've been using Lightroom 3 for a few months now. Last night I edited a batch of photos and all had noise reduction done to them. I closed down the program last night with a backup being done, and no corrupt files were found. Today I reopened the folder and most, but not all the photos had more noise throughout them than before I started. Most of it looking like color noise. All of them still said that there had been noise reduction done to them and were still at the same setting. Some of the photos in this batch had been edited and saved a few tmes without any problems upon reopening and still looking like I had edited them. The weirdest part is, if I zoom in on the photo its fine and it shows the noise reduction was applied but not when viewed in full screen. Can anyone explain this to me please? and tell me if there is a way to fix it?

Lightroom is the only program I have. All files are in .jpg.
I use "import from disk" then there is a popup with information on where I want to put it and naming it etc, there is usually a small preview in the right corner but there is only the name of the picture I´m trying to import...
When I press import, after choosing name etc, a new popup comes up saying "unknown errors occured"

Similar Messages

Can I get help with podcasts? When I try to open the podcasts, itunes crashes, says "itunes has detected a problem and must close", or the spanish equivalent since my xp is in spanish. everything else works fine, it even downloads podcasts and syncs.

Can I get help with podcasts? When I try to open the podcasts tab, itunes crashes, says "itunes has detected a problem and must close", or the spanish equivalent since my xp is in spanish. everything else works fine, it even downloads podcasts and syncs.

The only other thing I can suggest is to use the Repair option for iTunes.
Download the iTunes programme (do not uninstall your current iTunes) and then "install" the new copy. At some stage you should see an option to "install" or "Repair". Take the Repair option.
Once you've done that, if you still have a problem, I don't know what else to suggest, except to search through the discussions to see if anyone else has had the problem and managed to fix it.

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

Freezing, or crashing?
ID on the Mac can produce reports that may (or may not) prove helpful in diagnosing the problem. I suspect this is something not directly related to InDesign, and maybe not to any of the Adobe apps directly since you seem to be having a problem in more than one. That often inidcates a problem at the system level.
Nevertheless, it won't hurt to try to gather the reports. You'll find driections for how to generate them, and to post them on Pastebin.com (then put a link to them here) so we can see what's going on at Adobe Forums: InDesign CS5.5 Not Responding
Do you happen to run a font manager? If so, which one, and waht version?

Can anyone help with uploading photos from iPad to Facebook. Thanks

Can anyone help with uploading photos fom iPad to Facebook? Thanks

What app are you to trying to use ? You can't upload photos to Facebook via Safari, but a number of the Facebook apps support it e.g. the 'official' app : http://itunes.apple.com/us/app/facebook/id284882215?mt=8 (thought it's optimised for the iPhone/iPod Touch it does support uploading photos), Friendly For Facebook (http://itunes.apple.com/us/app/friendly-for-facebook/id400169658?mt=8)

Help with putting photos on my ipod!!!

i need help with putting photos on my 20 gig ipod. Model number is MA079LL. and i have versions 1.1 what is the up to date version?

anyone help?

Help with AS2 - photo gallery

Hi All
would someone beable to help me with some code, I downloaded a photo gallery example, at the moment the movie plays the photos when you click a button(timer)
What I'm trying to do is to get the movie to auto play the photos on load rather than having to click the button. I have been lookin in the scrip, I think its something to do with
// initialize values
currentIndex = 0;
but when I change this value to 1, not much happens, would some be able to have a look within the code and see where I can change it so that the movie runs the images automatcally on load.
I have pasted the code below, hope this is ok?
many thanks for anyones help!
CODE:
// (c) Copyright by Andrew DiFiore. All rights reserved. DO NOT REMOVE.
fscommand("allowscale", "false");
Stage.scaleMode = "noScale";
targetPhoto._visible = false;
slides_xml = new XML();
slides_xml.onLoad = loadSlideShow;
slides_xml.load("album.xml");
slides_xml.ignoreWhite = true;
function loadSlideShow(success) {
if (success == true) {
rootNode = slides_xml.firstChild;
totalSlides = rootNode.childNodes.length;
currentSlideNode = rootNode.firstChild;
photos = new Array(totalSlides);
thumbs = new Array(totalSlides);
captions = new Array(totalSlides);
tx = 0;
for (i=0; i < totalSlides; i++) { // populate arrays and create thumbnails dynamically
   photos[i] = currentSlideNode.attributes.jpegURL;
   thumbs[i] = [currentSlideNode.attributes.jpegWidth,currentSlideNode.attributes.jpegHeight];
   captions[i] = currentSlideNode.firstChild.nodeValue;
   _root.attachMovie("thumb","thumb"+i,i);
   _root["thumb"+i]._x = tx;
   _root["thumb"+i]._y = 595; // using fixed Y coord
   _root["thumb"+i].tindex = i;
   tx += 22;
   currentSlideNode = currentSlideNode.nextSibling;
// initialize values                      <<<<<<<<<<<<<<<<<<<<<<<IS IT HERE?????
currentIndex = 0;
targetWidth=thumbs[currentIndex][0]; // get width
targetHeight=thumbs[currentIndex][1]; // get height;
updateSlide();
function updateSlide() { // load photo, update caption and status fields
targetPhoto.loadPhoto(photos[currentIndex]);
caption = captions[currentIndex];
statusField = (currentIndex+1) + "/" + totalSlides;
function slideShow() {
if (currentIndex == totalSlides-1) { currentIndex = 0; } else { currentIndex++; }
targetPhoto._visible = false;
targetWidth=thumbs[currentIndex][0]; // get width
targetHeight=thumbs[currentIndex][1]; // get height;
updateSlide();
MovieClip.prototype.loadPhoto = function(fn) { // load external jpeg method + preloader
this.createEmptyMovieClip("holder", 1);
this.holder.loadMovie(fn);
this.onEnterFrame = function() { // NOTE: could use this to display percentage to user
if (Math.floor((this.holder.getBytesLoaded()/this.holder.getBytesTotal())*100) >= 100) {
   delete this.onEnterFrame;

something like this...not quite working
function updateSlide() { // load photo, update caption and status fields
setTimeout(targetPhoto.loadPhoto(photos[currentIndex], 2000);
caption = captions[currentIndex];
statusField = (currentIndex+1) + "/" + totalSlides;

Help with Importing Photo Albums from Iphoto

I have created a bunch of albums in iphoto and wish to transfer them to my ipod. However, when i go to the photos tab of itunes when my ipod is plugged in and i try to select Sync from Iphoto it says that i have 0 photos in iphoto. i have tried selecting individual folders of photos to import and that works just fine, but i want to be able to select the albums that i already created in iphoto.
thanks for your help

Apologies, you're right, it should be albumdata.xml.
Have a read of this thread:
http://discussions.apple.com/thread.jspa?threadID=778068&tstart=0
About 2/3'rds of the way down, DaveE has the following post:
- View your albumdata.xml file in some text editor, like TextEdit.
- Do a Find (cmd f) for "List of Keywords"
- The XML under that looks kind of like this:
<dict>
<key>1</key>
<string>Favorite</string>
<key>6</key>
<string>Birthday</string>
<key>3</key>
</dict>
You will probably have more keywords, this is just an example. But see the format - everything that has <something> ends with </something>.
When I had the problem, the example above looked like:
<dict>
<key>1</key>
<string>Favorite <key>6</key>
<string>Birthday</string>
<key>3</key>
</dict>
Notice the line return and </string> are missing for "Favorite". This happened to one of my keywords, and I don't know what caused it, but I deleted that keyword (and the one after it) from within iPhoto's preferences, and typed them in again.
The problem went away. Maybe some bogus character got into the keywords to make the XML go bad.
So try to use the method above to identify which keyword might have a problem, rather than go on a witch hunt and waste a lot of time. Of course, your problem could be different from mine entirely, but my iLife apps had the same problem you described.
Try it and see if it helps.
Regards
TD

Help with placing photos in Lightroom 4.2

I am making my first book in the Book module and I'm not finding it as flexible as I expected. I'm slowly figuring out some answers to the questions that have arisen, but I'd like some help with the following.
1. Can I add a small photo to the last page above the logo?
2. Can I put a border around a photo on the front, like a frame? Or do I have to prepare a jpg in Photoshop Elements with the frame and my photo?
3. Can I move or resize those yellow-bordered placement boxes, or make a custom layout if none of the layouts are exactly what I want?
Answeres to these questions will take a lot of frustration out of the process. :-)
Thanks,
Nancy

Camera? Is it supported? There is a tutorial here which may help http://www.youtube.com/watch?v=AYs8WbTbJCk

Help with Scripting forms when additional characters added

Hi,
I am new to scripting in adobe professional, I thank anyone in advance for any advice or help they can give me.
I am trying to use the calcuations within the forms that I am putting fields onto. In the process I discovered that the program the forms are within are attaching a pipe and additional characters after the actual name that I have named them. So, I am not able to use even the simple calculations within adobe to "sum" fields.   For example: I named the field "1_1Text" and this is what displays when you go into the calculations and pick the fields you want. But the actual name is "1_1Text|1234567" so the calculations will not work.
I take it then I need to use the advanced scripting but I am unsure of the format for a routine such as this. I have a little knowledge of javascript but it has been awhile. There must be a scan to find the pipe and then you should be able to chop off the extra characters since I will never know the characters the program adds on so then I can do calculations on these fields. Then you would have to put them into an array or something to save them?   Any help with a script or hints would surely be appreciated.
Thanks!

Could explain more fully how you are creating your forms and what programs you are using from the creation of the base document to which program and how you are adding fields.
I think you are misunderstanding me.   I use Adobe Acrobat Professional 6.0. I can get the calculations to work correctly if I use the form as it is after creating it.
But these forms are put into an SQL database and they get selected within a VB.net program or ASP.net program (both are used). So these programs (VB.net or ASP.net) are adding the extra characters at the end, hence I do not know the names of the fields when the forms are being filled in. So the calculations do not work with the "original names" that I created for the fields.
I just figured if I created a routine that looped through and chopped off the extra characters these programs put on the end I would be able to do the calcuations and they would work. I believe there is a substring operation within javascript.

Help with Terms Discounts when Freight included in Line Items

I have a unusual situation and I wondered if anyone has any ideas of how to perhaps help with it.
This is client who is getting his system step intially and we are trying to figure out how to best deal with this issue.
There is a vendor that has term such as: 2% 10, NET 30 (2% discount if paid in 10 days, Net 30 total)
They create a purchase order for 1 item with cost of $95 and $5 freight
When the goods receipt comes in they want to receive it for $100 and $0 freight (they want freight cost to be part of the line item to affect their inventory costs.
When they invoice it, they want the line item to remain at $100 (they don't want inventory costs to change for invoice different then goods receipt). However, when they pay the invoice within terms, they need the 2% discount to only apply to the $95 that was actual product, not the $5 that was freight cost. (they don't want to invoice it as $95 and $5 freight since they want item to remain in inventory at the $100 price).
How can this be done?
Edited by: Danielle Ostach on Mar 4, 2011 7:21 PM

It appears that the situation is a little different than presented.
For some vendors (and not all of them)
An order is created and the items are invoiced as follows (this is just example):
Vendor Terms: 1% 10 NET 30
Line Item 1: Item XXXX for Quantity 100 @ $10 each
Line Item 2: Item YYYY for Quantity 100 @ $10 each
Line Item 3: Item ZZZZ for Quantity 100 @ $10 each
Invoice total $3000.
There is then a note at the bottom of the invoice: Freight $100, Discount 1% 10 on $2900 = $29
Basically the vendor is including the freight amounts within each line item's price and then giving summary of the freight amount at bottom since they only allow discount on the goods, not the freight amount.
Is there a way to handle this through the system? This is SAP 8.8, Patch 14 with hot fix.

Is there any way to get aperture to include caption and title with a photo when emailing directly from aperture?

I have been all over and it seems impossible to do... but it also seems impossible that I'm the only one who wants to put a title and description with a photo once, and then have that follow the photo when I email it, rather than having to re-type each little tidbit every single time I email an image. I use aperture for work and am always creating custom batches of images to send to prospective clients. it's crazy having to re-do the information every time.
Any suggestions for workarounds, plugins... something I'm missing?? iphoto used to do this automatically but it seems it doesn't anymore. even knowing the reason why they aren't allowing it might make me feel less insane
thanks!

Thanks both of you!
I think my iphoto settings must have defaulted back when I migrated to my new computer because sure enough, when I followed your instructions it went back to emailing the descriptions, which is great, and I hadn't ever tried opening the same library in iphoto. That's really convenient. It's too bad (and sort of strange I think) that Aperture doesn't have the same feature but as workarounds go this one is quite lovely.
The only remaining question is why, when I do open the library in iphoto, the description is intact but there is no title other than the version name?
For example, in aperture there is the version name, which is something like _DSC1733, the title I added in the "title" bar, which might be "diamond necklace" and then the description which is "18" long, 2carats total weight, platinum, 2013".
When I open the library in iphoto, the version name is at the top and under it is the decription, and the title is gone.
Unless there is another button I missed I think I have to go in and add the title into the description, and then just uncheck the version name when emailing so it doesn't show up.
Any advice? Hope I made the question clear-ish

HT201317 Help with deleting photos.

Hello, I am slightly frustrated with photo management on my iPhone and iPad. I seem to end with a photo appearing in my Camera Roll, an album, and in photo stream on both devices. Is there a simple and quick way to delete it from all locations, as at the moment I have to delete it from each individually.

No, unfortunately you cannot delete a specific picture on all locations with just one click. It is like you described, you have to do it manually one by one.

Help with syncing photos please

Ok, so iam having problems with syncing a folder from my computer to my iphone. Once done syncing the photos it makes 2 albums on my iphone, one with the name of my folder and one with the name "Photo Library" they both have the same photos on them, how do I get the unwanted one off?

This is normal and cannot be changed.
All photos transferred to the iPhone are stored and will be available in the iPhone's Photo Library.
If you transfer 3 folder names or albums that contain photos say 10 photos each, it will be as follows:
Photo Library (30)
Photo Album 1 (10)
Photo Album 2 (10)
Photo Album 3 (10)
With the Photo Album names to be whatever you name the folders which contain the photos transferred to your iPhone.
This way you can view all photos available in all albums by selecting the iPhone's Photo Library or view the photos available in a particular folder or album only by selecting the album.
Photos in the folders or albums are not duplicated. They include a pointer to the original photo contained in the iPhone's Photo Library.

Help with recovering photos in LR3

I was backing up some photos from my LR folders, when I accidentally deleted some.
I downloaded a file recovery program and was able to recover the photos. However, one of the particular group of photos, I'm having extreme difficulties with. I can see their previews in LR, but when clicked on it the photo says "file is missing or corrupt" OR the photo changes to one from another session. They had the same file name, was the older one somehow overwritten? Can I still recover those older photos? I've tried everything I can think of and am reaching dead ends. ANY help will be greatly appreciated.

Yea, it doesn't seem like the recovery programs were able to recover them.
No, I've tried them in other programs, and even sent the found files to other photographers, and they're having the same problems.

Need help with scanned photo....

I scanned a photo into iphoto'11 using a new fujitsu scansnap s1500m. Once I saved it, I changed the extension from .pdf to .jpg by going to "get info." I then imported it into iphoto and I can see the thumbnail -- but when I click on the thumbnail I get a black screen. I am using a MacBook Pro OS X 10.6.8 if that helps. Can anyone tell me what did i do wrong?
I am a senior who is not very tech savvy, but I try. I have scanned a total of two photos, but can only launch one of them in iphoto. I have compared the three using "get info" but can't see a difference. An old lady needs help......

You should also be able to set the scan type to JPG in, I'm assuming, there's an online preference window for your scanner. It may be set to PDF as a default in the scanner.
Here's a Link to a Windows Help page on setting preferences:
http://scansnapcommunity.com/tips-tricks/1927-how-to-scan-to-jpeg-with-scansnap/
You should be able to do similar things with your Mac.

Help with Noisy Photos when reopening

Similar Messages

Maybe you are looking for