Help with Note 761637 - Login restrictions prevent TMSADM logon

Hello all,
I'm receviing a large number of logon prompts in STMS. I'm having trouble understanding how to implement SAP note 761637 and was hoping someone that had implemented it already could guide me.
The note says
If you now add an entry with sysnam=,ADMPWD and the Routestring=USER to the TMSCROUTE table
The fields in the table are sysnam & RFCRoute (This has description of RouteString)
When I attempt to add a entry using SE16, SYSNAM as a selecting list on only the systems I have, why does the note tell me to enter the admpwd which I assume is short for admin password.
routestring=USER. So I enter the word USER?
I have implemented the following corrections
Note 713622 - Password rules prevent TMSADM logon
Note 749977 - Remote logons using standard client in the TMS
Thank you for your help.

OK, I'm having the same problems understanding this note as the original poster did. I can't figure out if table TMSCROUTE is supposed to contain an entry like:
,ADMPWD USER
-or--
,<TheActualPassword> TMSADM@<sid>.<domain>
-or--
some other weird variant?
Can someone who's implemented 'stringent' passwords post and example of their working TMSCROUTE entry? Meanwhile, I'll file a problem report, and when we get this working I'll post a response here.
bryan
<removed_by_moderator>
Edited by: Julius Bussche on Feb 17, 2008 10:58 PM

Similar Messages

Help with some java login code

hey,
I am a new member but used to visit the site regularly. I am undergoing a java project and I cannot seem to get my head around how to code when users log in, there name must appear at the top of each page they visit.
User enters name into a text box. Do I use getter and setter methods? any bit of help would be of some advantage to me.
Thanks for your time and I'll help with anyone else who is stuck.

if JSP or servlet use Session...
if you are using frame you have to consider... which frame is a top parent. that top frame will have the set and get method.. for you to set and retrieve the user name.. bear in mind that different object will have different user...
so you have to play fair game ...hehehehe :-)

Help with implementing a login page - ADF Faces & 10.1.3

I am having trouble getting a basic login page working and am hoping someone can help. I'd like to have a login page with username and password fields and a submit button. When submitted, I would like to authenticate the user and either send them to a second page if I find the username & password, or return them to the login page and display a global JSF message if I can't find the username/password info. Pretty standard stuff.
I've got an app module that contains a read-only view object, which has a custom method (in MyViewImpl.java) that checks the username & password against a database table and returns a boolean. I don't have an entity object since it's a read-only view.
I've tried 2 different approaches:
1) Binding the username and pw inputText fields to the parameters of my custom method, and binding the submit button to the custom method, all done by drag and drop from my data controls.
The problem with this approach is that I cannot figure out how to set the global message if the username/password combo is invalid. Once my method is invoked, it returns an "action" String and page navigation occurs (In this case, I have my custom method return a String instead of a boolean). If login fails, at what point do I set the global message?
2) Using a backing bean for my login page and binding the fields and the button to the bean, and setting the button's action to a method in the bean, which then calls my custom method. Finally, either set the message or navigate based on the boolean returned from my method.
This seems the better approach, since it keeps the navigation and error message in the ViewController. The problem here is that I can't figure out how to call my custom method from my backing bean. I've seen a few examples, including one using a managed property and calling the action binding's invoke() method, but haven't had any luck (see #51 on this page: http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html). The invoke() method does not return a value, so I cannot get the boolean value I need.
So, I'm apparently missing a piece (or two or three) of the puzzle here. Any guidance is most welcome! And I'm fine with changing any piece of this puzzle if there's a better way of accomplishing this.
Thanks,
Andy

Frank,
Thanks for your reply. I'm not sure if container managed authentication is a good fit or not for my current application, so I will have to look into the details of how it works. Thanks for the suggestion. Whether I use it or not, I will still need to authenticate against a database and not a flat file due to the fact that users may come and go and change passwords frequently, and my application will not be handling the management of that.
So, I would be still left with the task of accessing the ViewObject and navigating/displaying a message based on the results of that lookup. Fortunately, after slogging through my code and consulting the ADF documentation that is scattered throughout the Oracle website, I was able to get the login page working as I wanted (I found the "Accessing Bindings and Binding Containers from JSF Backing Beans" section of http://www.oracle.com/technology/products/jdev/tips/muench/1013eabinding/index.html to be especially helpful). I used the submit button's action to call a method in the backing bean that sent the username and password to my application module's custom authentication method. When I got the boolean result, I either returned a "success" action or set a global JSF message and returned "null".
Needless to say, I am looking forward to the ADF/JSF version of the Toystore application, along with some sort of comprehensive framework documentation.
Thanks,
Andy

Help with Windows Domain Login on Mac

Hello Everyone,
We have two Mac Pros at my work running Mac OS 10.5.8 and they are attached to the Windows Server / Domain so when the Mac is turned on you login with your Domain credentials (using Win Server to Authenticate). Now all of this has been working fine since the computers were purchased a year ago, until two days ago that is. I turned on the Mac Pro in the morning and tried to login, and the Mac would freeze and do nothing. I restarted and tried again, using the same credentials I always use, but nothing worked. I called the IT guys and had my windows user account reset thinking that the password was expired, still didn't help, so I asked them to reset the whole account, still didn't help.
At this point I asked a few of my co-workers to login on my Mac using their login info, and they had no problems at all. I decided to dig deeper into this problem and logging in under a "local" Mac account I went into the "Accounts" preferences to check what was going on, to my surprise my Domain account was visible (normally it wasn't unless you were logged in) and under the account it said "sharing only".
I am still trying to figure out why my Domain account was changed from "Admin, Managed" to "Sharing Only"? So I decided that the easy fix here was to use a previously made (and tested) image file which I created when the Mac Pro was first setup and all the software was installed. So after cloning the image to the Mac HD I turned on the Mac and tried to login, again nothing happened. I can login using the local account, and my co-workers can login fine, but my domain login just refuses to work. I have also tired to login on other Macs in the department and I can login just fine on each one, the only Mac that doesn't let me login is my machine.
I have run out of ideas, short of re-installing the entire system from scratch.. which I really don't want to do unless I have to. But if anyone out there has any ideas I would more than welcome them.
Thanks in advance..

It's probably related to some type of DRM (copy-protection) on the digital copy, and not due to it being any particular type of file format. The DRM scheme probably only works under Windows. And if that is the case, I don't think you will be able to get it to work under Mac OS X, short of running VMware Fusions or Parallels Desktop (or Sun's free VirtualBox) and installing Windows to run under Mac OS X.
Considering the popularity of Macs recently, and higher use of Macs among creative folks, it's pretty stupid for the studio/distributor to make a key feature Windows-only.

Help with PowerBook G3 Login

ok i was using it not 2 long ago and it restarted on me....i took my password off a few days before since i was only one who used it but now it wants me to put a password in i used all the old ones and nothin works and i try it without a password and just user name all it does is shake the only thing on the screen is Restart, Shut-Down, and Login....does any one know how 2 by-pass this step or how 2 just reset my entire hard drive im runnin Mac OS 10 i dont have my CD that came with the software anymore so is there anything else i can do someone please help me?

Karen,
Did you read this howto?
http://www.oracle.com/technology/products/database/application_express/howtos/how_to_change_auth_method.html
Create a function described in step 11 to query the table and if user info is good return true.
Each page that requires a login change the security authentication to "page requires authentication".
Each page that doesn't require a login change the security authentication to "page is public".

Need help with Apple ID login for iCloud/MobileMe to move Calendar.

Despite the multiple warnings from Apple that MobileMe would be shutting down on June 30 & that I needed to migrate my "stuff," I didn't realize that my iCal calendar on my Mac & iOS devices (iPhone, iPad) was through my MobileMe account (@me.com login) and not my "main" Apple ID account (which is a Gmail login), so I didn't bother doing anything to migrate my "stuff" because I hardly ever used my MobileMe account, or so I thought. That said, my life revolves around my iCal calendar-- can't live without it! Two days ago I started getting a pop-up message on my Mac that says "iCal can’t log in to your “[email protected]” account because your password may be incorrect." It was while I went through Preferences to fix this that I realized my MobileMe account was the master one for iCal! I know that my password was correct, but I'm guessing it has something to do with the fact that MobileMe is now shut down that caused the pop-up in the first place. Meanwhile, my calendars are not syncing between my devices, which is something I'd like to resolve ASAP!
I'd like to push everything over to iCloud, but I noticed that for some (dumb) reason, I used my MobileMe account login for iCloud as well! Is there any way to merge or replace my MobileMe account with my Gmail Apple ID account so that my iCloud is no longer tied to MobileMe, since that program is now defunct? If not, at the very least, any help you could provide on how to transfer my calendar to the Cloud would be much appreciated! Thank you!

Nevermind. Figured out the answer myself! Just had to dig a little deeper into the Apple Support Community than I had before I posted!

Help with notes that disappear from IPad and iPhone?

Help! My notes on the iPad keep disappearing from my IPad then from my iPhone. The notes are showing in yahoo ok. I type my notes and then they are there for a short while then disappear. I share one apple account with my husband so we do not use the iCloud for notes so that we keep them separate. On his IPad when you go to settings/notes he can then show under default yahoo, iCloud and on my IPad. On my IPad it just shows yahoo under default. How can I sort this? Use to work fine before the upgrade.

Welcome to the Apple Community.
First check that all your settings are correct, that notes syncing (mail and notes on a computer) is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the notes you are adding are added to your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by checking in accounts on an iOS device, or the left side panel in mail on a computer), non iCloud notes will not sync.
If you are sure that everything is set up correctly and your notes are in the iCloud group, you might try unchecking notes syncing (mail and notes on a computer) in the iCloud settings, restarting your device and then re-enabling notes syncing.

Help with multiple user login script

Hi, just a little background first to what i want to do...
I have about 300 Macs in an education environment, they are bound to the AD network for authentication and OSX Server LDAP for forced prefs, the network Home accounts are stored via Apple and Promise Raids on XServes.
We also have 4 local user accounts on all the Macs for video etc. I have some simple scripts that i would like to force to the local Users only, (empty trash, reset dock. reset desktop pics and delete items etc).
I have done the script and saved it as a .app and it works on the Macs as a local User login option. However, when I bind the Mac back to the LDAP the local user script stops working. I have seen the option to 'Allow local scripts' to run via WGM, but have not had success here either, (I have ran the 2 EnableMCXLoginScripts on the clients).
Now I thought I would try to run the script as a Launchdaemon option using Lingon. This works, but its active for all users, I do not want it to delete Network account users Desktops! Is there a way I can add an 'If' option at the beginning of my script. As in..'if users home account is /Network/Sharepoint' then quit.
I cannot run it as a one script for all Mac setting as the different local users have different Desktop Pics and Docks etc
Any ideas or other options I could try?
Any help hugely appreciated.
C

V.K, thanks for that, sometimes I just don't see the obvious.
I have tried it as a ~/Library/LaunchAgents using lingon to create the .plist. I just cannot get it to run though. I have tried it as a .sh .scpt and as a .app file stored in the /Users/Shared folder.
All will run if I manually launch them after login though. I have made them all executable for all.
I have also tried to run it without the Mac connected to my LDAP. I have added the relevant folders to the allow list in WGM on the lDAP anyway...
Any ideas what I could be doing wrong?
C

Help with Note cards?? I thought I could do them with this program...

Help! I purchased Adobe Photoshop Elements 12 back in September, but due to computer problems and working on other projects, I just got started using it. Or at least I'm trying to!
My main (read: pretty well ONLY) reason for purchasing was that I thought I could make note cards (photo on front, folded, like a blank card, but with one of my photos on the front) for personal use and Christmas gift for my aunt who writes a lot of notes. I really wanted to create a special gift for her, as well as unique cards for my own use.
But when I open the program and click "Create" all I see is Greeting Cards! And when I click on it, I don't see anything like what I want to create! Help! Is there any way to create this type of card with this program? Or at least close? I would really appreciate ANY and ALL help!!!
Thanks!

Hi,
You can try going to finder, hitting CMD + F and below search this mac, you should see kind. You can try switching that contents and the second option to documents.
Hope this helps,
Zevie

Need Help with "Not Enough Memory Error" when running executable (is my VI reworkable?)

When I started making this VI, I had no clue about proper VI flow, sub-VI usuage, and much more I'm sure.
The VI is a program that outputs a 0-5V digiatl signal to a relay board (to actuate an air cylinder) and monitors 4 input voltages (lets say from a pressure transducer) . The program would then shut down the corresponding output channel if a pressure threshold is not met.
Surprissingly for my first LV program, The VI functions "fine" (the quotes are because I know my programming flow is a mess and probably not efficient) unitl I reach a given cycle count or time elasped, at which time my VI blows up and I receive an error for "not enough memory to complete operatoin".
I am wondering if there is a simple DAQmx (or something else) command misplaced or missing that would solve this issue. When I started making this VI I had a poor top down design layout, or lack of one. I would like to believe I have learned a lot from making this program with no LV training and if I were to do it again I would utilize state machines and sub VI's more. However, with time not on my side and LV not a priority in my job I would like to know if this VI is reworkable..?
I should also mention that this program is being run as an executable on a laptop without the full LV development software. I dont know if the executable creation process could have left to this problem either...
Attached is LV version 10 and 11
Thanks for the help
Attachments:
LCT_DAQmx v11.0.vi ‏173 KB
LCT_DAQmx.vi ‏135 KB

There are some things you can probabaly do fairly easily. Four of the inner while loops appear to be very similar. You could probably make a subVI from one of them and reuse the code. Some of the shift registers are initialized and some are not. I suspect that this is an error, although I did not look closely enough to determine which way is intended. Read up on reentrancy. You may need that for the subVI.
The outer loop, if it is needed at all should be stopped by a front panel boolean, not by the Abort button. Someone on the Forums has suggested that using the Abort button to stop a VI is like using a tree to stop a car - it works but may have undesirable consequences!
Re-initializing the DAQ tasks and clearing them on each iteration is not very effficient, is slow, and may lead to problems.
The inner inner while loops (inside On Cycle and Off Cycle) are very similar, differing mostly in the data written. Perhaps you only need Idle and Run (with Data as a parameter). The inner inner loops might be combined with the outer loops with some change in the way the timing is handled.
You Dequeue in two places in each loop. There is no data dependency bewteen the two Dequeue functions, meaning that you cannot be sure which will execute first. Also, none of the Dequeues has a timeout set. They will wait forever if no data is available. Queues should not usually be read in more than one location to avoid loss of data or confusion about which data came first.
Lynn

Help with Coldfusion 5 login page

Hi
I want to setup a login page for my company website. This is running in Coldfusion version 5(I know its very old version). I never worked with Coldfusion before. Is there any setting in Control panel that we can require user to login to view any of our contents? or do we have edit all the pages and redirect to a login page if thats a not registered user? Please advice me.
I cant upgrade this server to new version,because this project contract is finishing end of this year.
Thanks
Ananth

You want to search up the "Application.cfm" file.
In ColdFusion this file is automatically included at the beginning of all .cfm files requested from the same directory or any sub-directroy that does not have another Application.cfm file. It is a common place to put login logic and other code that needs to be executed with every ColdFusion request.
You will also want to know about the <cfapplication ...> tag that is used to name an application and provide access to applicaiton and session state scopes so that a login state can be maintained from request to request.
A great resource would be the ColdFusion documentation that has entire chapters compete with sample code on how to set up web site authentication:
Using the Application Framework
Application Security
http://www.adobe.com/livedocs/coldfusion/5.0/

Help with a simple login servlet

I appreciate any help and assistance you all can give. I'm in an Intro to Java class on Georgia State and have an issue with this servlet I'm building. We're developing a login system where we have an http form pass a studentid and pin number to a servlet, then the servlet will match those inputs against the result set from an access database query using sql. I keep getting an error that will be posted below and I can't see any reason why I'd be getting it. Again any help would be appreciated. Here's the info:
import java.io.*;
import java.util.*;
import java.sql.*; // for JDBC
import javax.servlet.*; // for Servlet
import javax.servlet.http.*; // for HttpServlet
public class StudentLogin extends HttpServlet {
public void doGet(HttpServletRequest request,
HttpServletResponse response)
throws IOException, ServletException{
          //get parameters
                    String aStudentId = (String) request.getParameter("studentid");
          String aPin = (String) request.getParameter("pin");
          //define the data source
                    String url = "jdbc:odbc:CIS3270Project";
                    Connection con = null;
                    Statement stmt;
                    String query;
          ResultSet rs = null;
                    //exception handling
                    try {
                    //load the driver -throws ClassNotFoundException
                    Class.forName ("sun.jdbc.odbc.JdbcOdbcDriver");
                    catch (ClassNotFoundException cnfe) {
                    System.err.println (cnfe);
     try {
                    con = DriverManager.getConnection (url, "my-user", "my-passwd");
                    // create sql statement
                    stmt = con.createStatement ();
                    query = "SELECT * FROM STUDENT WHERE StudentID='" + aStudentId + "'";
                    // run the query
                    rs = stmt.executeQuery (query);
                    //get data from result set
                         rs.next();
                         String studentId = rs.getString("StudentID");
                         String pin = rs.getString("PIN");
                         System.out.println(studentId);
                         System.out.println(pin);
               catch (SQLException ex) {
                    ex.printStackTrace();
response.setContentType("text/html");
PrintWriter out = response.getWriter();
          //compare form data to result set
if(aPin.equals(pin)){
               System.out.println("Login Successful");
          else{
               System.out.println("Login Failed");
The error is as follows:
StudentLogin.java:58: cannot resolve symbol
symbol : variable pin
location: class StudentLogin
if(aPin.equals(pin)){
^
1 error
I've declared pin and there should be no issue with it using it as an argument in this string comparison. Thanks for any light you can shed on this.
-Matt

Alright, I've broken up the code and made it more modular. Here's my code for my Authenticator class followed by the code in the servlet.
import java.sql.*;
import java.io.*;
import java.util.*;
public class Authenticator{
     //define the data source
     Connection con = null;
     Statement stmt;
     String query;
ResultSet rs = null;
     public void loadDb(){
          try {
               //load the driver -throws ClassNotFoundException
               Class.forName ("sun.jdbc.odbc.JdbcOdbcDriver");
          catch (ClassNotFoundException cnfe) {
               System.err.println (cnfe);
          try {
               con = DriverManager.getConnection ("jdbc:odbc:CIS3270Project", "my-user", "my-passwd");
          catch (SQLException ex) {
               ex.printStackTrace();
     public void queryDb(String aStudentId){
          try {
               // create sql statement
               stmt = con.createStatement ();
               query = "SELECT * FROM STUDENT WHERE StudentID='" + aStudentId + "'";
               // run the query
               rs = stmt.executeQuery (query);
          catch (SQLException xe) {
               xe.printStackTrace();
          try {
               //get data from result set
               rs.next();
               String studentId = rs.getString("StudentId");
               String pin = rs.getString("PIN");
          catch (SQLException x) {
               x.printStackTrace();
     public void isValid(String aPin){
          if(pin.equals(aPin)){
               System.out.println("Login Successful");
          else{
               System.out.println("Login Failed");
Here's the servlet:
import java.io.*;
import java.util.*;
import java.sql.*; // for JDBC
import javax.servlet.*; // for Servlet
import javax.servlet.http.*; // for HttpServlet
public class StudentLogin extends HttpServlet {
public void doGet(HttpServletRequest request,
HttpServletResponse response)
throws IOException, ServletException{
//get parameters
          String aStudentId = (String) request.getParameter("studentid");
String aPin = (String) request.getParameter("pin");
     Authenticator a = new Authenticator();
     a.loadDb();
     a.queryDb(aStudentId);
     a.isValid(aPin);
response.setContentType("text/html");
PrintWriter out = response.getWriter();
//bunch of HTML output shit goes here
I keep getting an error of cannot resolve symbol in the isValid method. It can't resolve the variable 'pin' from the database query. Does try limit the scope of that variable to only inside that try statement? Thanks for any help you guys can give.

Help with php/cookies login error message

Hi
I'm working in DreamWeaver CS4, On a Mac 10.04 OSX system. I am using php and a cookies if (isset) function
Im trying to create and error message for users who try to login to the site. but can't because there is no connection to the database as of yet.
I have a connect srcript and a login script as well as the login and registration page.
when the user tries to login in I get a syntax error mesage instead of getting the phrase," A problem connecting to the data base. Please try again later."
How can I resolve this issue, Thanks your help it is greatly appreciated. To view the php code/connect script used in the login registration follow this link the script will available there. http://http://www.camtamkalaboration.com/products.php

jarmelo wrote:
how would I go about upgrading from tiger to leopard?
Buy Leopard, insert disk, follow instructions.
You can instal php (which is built into Leopard) by renaming a file and uncommenting a line then enabling web sharing in System Preferences but I use entropy because it has the GD enabled for CAPTCHA and other features. There's a 10.4 version on their website but it mentions it's an older, unsupported and probably insecure version. You should use entropy Leopard version 5.2.9-7 for Leopard/ADDT development.
After you get php installed you need to install MySQL which is easy to find through searching and straight-forward to instal. Then instal phpMyAdmin and you'll be good to go!
As mentioned earlier I can walk you through the steps more thoroughly if you decide to upgrade to Leopard. There's some other steps involved: You need to configure virtual hosts so that it points to your Sites folder on your Mac and each folder in Sites folder are for each site you have so that entering site1 goes to ~/Sites/site1 on local testing server and entering site2 goes to ~/Sites/site2 in local testing server, etc. very, very easy to setup. Just edit hidden hosts file in etc folder and username.config file in apache2 hidden folder.
There's other tutorials out there that show how to do it but most don't have all the info. I'm working on a step-by-step tutorial on my website but it's not finished yet. Maybe it'll be ready by the time you decide to upgrade to Leopard.

About to panic! need urgent help with Notes!!!

I had this huge collection of very important notes which are now all gone thanks to a bug in Mountain Lion!
The notes app in mountain lion was showing two copies of each note. So i disabled the icloud notes from system preferance. now i could see only 1 copy of each note in the notes app. thinking that these were locally stored, i deleted them all and then reeneable icloud notes. to my horror, all notes were gone!!!! they have been wiped off from my iphone and ipad as well.
IM ABOUT TO PANIC! PLEASE HELP ME RETRIEVE THEM! THIS WAS IMPORTANT STUFF!!!!
please...
Neerav

https://discussions.apple.com/message/19171700#19171700

Need help with not working timer Hp Display Assistant

Hello i got monitor LA 2306v and when i want use "timer" option in Hp Display Assistant it doesn't work "sheduler" options fork perfect but "timer" one at all :/ Using Windows Vista home premium and got newest version of Hp Display Assistant.
ill be rly grateful for help thanks

The following was taken from here.
HP Display Assistant is a Windows-based software utility designed for select HP displays that support
the Display Data Channel/Command Interface (DDC/CI) communications channel defined by the Video
Electronics Standards Association (VESA). HP Display Assistant does not function on non-HP displays
(including non-HP displays that support DDC/CI), and does not function on HP displays that do not
support DDC/CI. For a list of leading graphics cards that support HP Display Assistant:
1. Open HP Display Assistant.
2. Click the Options tab.
3. Click the Help button.
4. Click the Tech. Support button to open the HP Display Assistant online support Web page.
5. Click the Compatibility link on the Web page.
Is the computer's video card on the supported/compatible list? If the video card does not support the feature, then the program won't work.
Let me know if the computer's graphics card is on the list.
Also, report what graphics card the system is using.
I await your reply.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Help with Note 761637 - Login restrictions prevent TMSADM logon

Similar Messages

Maybe you are looking for