Help with OC settings for P67A-GD65 with i5 2500k using v1.E BIOS

Right, I have overclocked quite a bit before, but it was a years ago and on AMD's. Now I have a system worth pushing again and I'm not familiar with a lot of the terms in the BIOS anymore!
Have been reading through the various threads on OC'ing this Mboard, but something thats frequently mentioned is problems with older BIOS's and voltage settings, which v1.E is supposed to fix.
I'm looking to get a stable 4.6ghz with low power usage during idle and under load temps of 65-70deg (if poss).
I don't know whether to use the approaches others have used to get round this issue or is this now not a problem?
If so, what settings should I be using?! Getting a lil confused.
Englishman's thread (https://forum-en.msi.com/index.php?topic=146272.0) has helped a bit, but I fear I may have misunderstood and cocked some of it up!
So, here's the settings I'm trying atm, will be doing an overnight Prime95 torture test, but what do you guys think? Any corrections/improvements?
Dunno how to post pics on forum so will just type all that I can think is relevant. If I've missed anything, ask and I'll post.
CPU ratio - 46(?)
PLL overvoltage - Auto
EIST - Enabled
Intel turbo boost - Enabled
Spread spectrum - Enabled
VDroop control - Auto
CPU core voltage - 1.350v (so far...)
CPU I/O voltage - Auto
System Agent voltage - Auto
CPU PLL voltage - Auto
PCH 1.05 - Auto
CPU Phase control - Intel SVID Mode
Limit CPUID Max - Disabled
Execute Disable Bit - Enabled
C1E Support - Enabled
Overspeed protection - Enabled
Intel C-State - Enabled
Package C-State limit - No limit
Long duration power - 150
Short duration power - 150
Primary plane turbo power limit - 0
1 - core ratio limit - 46(?)
2 - core ratio limit - 45(?)
3 - core ratio limit - 44(?)
4 - core ratio limit - 43(?)
Any help much appreciated!!!

Hey AngelD69! I noticed we have almost the same specs so I might as well share my settings. So far, it's rock solid... (Although when using IBT, I still seem to have throttling issues. It's prolly coz of beta bios.)
BIOS 1.F3
Overclocking
CPU Base Frequency [10kHz]    [10000]
Adjust CPU Ratio     [33]
Adjust CPU Ratio in OS      [Disabled]
Internal PLL Overvoltage     [Enabled]
EIST        [Enabled]
Intel Turbo Boost     [Enabled]
DRAM Frequency       [DDR3-1600MHz]
Extreme Memory Profile (X.M.P)   [Disabled]
DRAM Timing Mode     [Link]
DRAM Configuration        2T-9-9-9-24 Everthing else [Auto]
Spread Spectrum     [Disabled]
VDroop Control        [Low VDroop]
CPU Core Voltage     [1.34v]
CPU I/O Voltage     [Auto]
DRAM Voltage        [1.507v]
System Agent Voltage (SA) [Auto]
CPU PLL Voltage     [Auto]
PCH 1.05         [Auto]
DDR_VREF_CA_A       [Auto]
DDR_VREF_CA_B       [Auto]
DDR_VREF_DA_A       [Auto]
DDR_VREF_DA_B       [Auto]
CPU Features
Active Processor Cores     [All]
Limit CPUID Maximum    [Disabled]
Execute Disable Bit    [Enabled]
Intel Virtualisation Tech [Disabled]
Intel VT-D Tech     [Disabled]
Power Technology    [Custom]
C1E Support        [Disabled]
Overspeed Protection    [Enabled]
Intel C-State      [Enabled]
Package C State Limit     [No Limit]
Long Duration Power Limit (W) 200
Long Duration Maintained (ms) 1000
Long Duration Power Limit (W) 250
Primary plane turbo power limit 0
1-Core Ratio Limit    45
2-Core Ratio Limit    45
3-Core Ratio Limit    45
4-Core Ratio Limit    45

Similar Messages

Help with print settings for Panoramas

Hi,
I use an Epson 2880 and I am trying to figure out the print settings for doing an 11 x 34in panorama print on 13" roll paper from Aperture 3.0.3. I finally got it to do one print properly, but the setup was totally counter intuitive and I can't reproduce it. I tried using "Custom" Paper size and setting it to 13" x 36", then using the landscape mode and setting the Image Size to 11 x 34". Any way I did this ended up with the image printing the wrong way on the paper. So I went back and picked "Roll" paper. This leaves only one field to fill in, which I presume is the paper width (it really didn't make this obvious in the dialogue.). Then I set the mode to Portrait, and made sure that the settings for the Image size were 11 x 34. It then printed fine. But when I went back to print another file, even though I had saved the settings, now I am presented with only one box for specifying the Image Size and there is no way to get it right again. HELP! The settings for this kind of print in Photoshop is also counterintuitive, but when you get it set right, and you know the settings, no problem reproducing it. I think maybe there is a bug in AP3 with regard to this sort of setup.

Hey BaByPaW1990,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

HT1494 hi....i cant continuously play my music with my ipod nano....i tried a lot with the settings for wake time but still it is pausing the music path.Please anybody help me with this issue

hi....i cant continuously play my music with my ipod nano....i tried a lot with the settings for wake time but still it is pausing the music path.Please anybody help me with this issue

Is this your problem?
iPod nano (6th generation): Music stops when display turns off
B-rock

HT5648 OS10.6.8 Firefox 24.0 The new Yahoo mail shows no graphics. However, the new Yahoo mail displays correctly in Safari and Chrome. I believe this has to to with the settings for Javascript. Help me, please.

OS10.6.8, Firefox 24.0
The new Yahoo mail shows no graphics using Firefox 24.0 - just identical rectangles where new icons should be.\. However, the new Yahoo mail displays correctly in Safari and Chrome. I believe this has to to with the settings for Javascript. Those settings aren.t easy to access in the most recent Firefox 24.0 version. Help me, please.

The settings for Javascript are either on or off, Fireefox 24 doesn't give you a option to turn off Javascript, unless you installed something like NoScript extension (or some other Javascipt blocking add-on)
If NoScript, then you need to use the View > Toolbars > Customize and drag the NoScript "Temp Allow All" button to the toolbar area to enable all enabled scripts (including Javascript) on that web page.
Under the Firefox Help menu is a option to restart with add-ons disabled to see if something you might have installed is causing your problem.
Reinstall Firefox or create another user account and run Firefox there to try to localize your issue.
I'm having no problem here on 10.6.8 in Firefox, Chrome or Safari, Yahoo Mail works perfectly.

Best sysctl settings for a netbook with 1G RAM?

Hi all,
As the title says, what are (based on your experiences) the best sysctl settings for a netbook with 1G of RAM? I now have vm.swappiness=10 and vm.vfs_cache_pressure=50. Should I change these to a lower or higher value? Any other parameters I should add? Let me know!
Thanks for your help.
Luc

karol wrote:https://wiki.archlinux.org/index.php/Ma … M_and_swap
I already read that article, and followed most of it. Should I set my swappiness to 1, then?

Issue with Visibility Settings for Backgrounds and Layers

I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.

Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave

P67A-GD65 (B3)- Crashes during use

hi
I am running a P67A-GD65 (B3) motherboard based PC, with:
a Intel I5 core (2500k) (currently no overclock)
MSI Twin Frozr II (GTI 560-Ti)
Corsair Vengeance RAM (2x4 GB, 1600Hz, stock speed (yes, I know, waste of money, but they were going cheap))
with 2 Seagate HDDs
HP X23 monitor
On windows 7
During use, the computer crashes, usually after at least 10 mins. Despite two format and reinstalls of windows, and having a PC repairman have a look at it. Memory tested, Bios settings reset, Bios Flashed, GPU drivers updated, temperatures tested (via software) and finally, motherboard sent back to Scan for testing (no fault detected, sent at the advice of the PC repairperson)
Any suggestions? Idealy, I would replace each component with a equivalent, but sadly, most everyone I know is using laptops or Macs ( )
My next option, after this, would be to resort to replacing components with el cheapo equivalents (starting with the cheapest, RAM) until it works. Is this likley to work?, since I can only afford to do so for the RAM and perhaps a cheap mobo.

Quote
1600Hz, stock speed
Please manually reduce the memory clock speed to DDR3-1333 and set the DRAM Voltage to ~1.575V. Also, manually set the memory command rate to 2T. Then retest.
Quote
P67A-GD65 (B3)
What is your current UEFI/BIOS Version?

Help with Internet Settings for Blackberry Curve 8520 On Orange Pay-Monthly

I need help with my internet settings I'm currently on Orange Pay-Monthly and have recently bought a second hand Blackberry Curve 8520 which is unlocked but used to be on 02! I don't have a clue on what to do or where to start all I know is in the top right hand corner where the signal bar is it says GPRS and WIFI ! I don't want WIFI as I don't have a wireless connection and would like to get the settings for my curve so I can browse the internet and go on Facebook etc and BBM!! I've clicked on the internet logo in the menu bar but it just say's hotspot browser.. but wont let me browse!! Some one please help me !!

Hey BaByPaW1990,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Help with FMLE Settings for Sports Broadcast

Hello,
I am in need of some help tweaking my settings in FMLE. I put on various sports broadcasts, but one of my clients has limited bandwidth (avg ~2.5-3mbps upload).
I'd like to keep the output pixel size at 640x360 so that it takes up our entire player and doesn't letter box it, but with the larger video size I sometimes run in to either buffering,or pixelated video depending on how the bandwidth is that particular day. I'd like to stream between 800k-1000k.
I am using VP6 codec and using an Osprey Card as my capture device.
Some of my questions are:
1) Should I capture my video bigger than 640x360 and have FMLE shrink it, or capture it at the same size I want to output it at?
2) In the Format advanced encoder settings, What should I set as my keyframe, quality, and datarate window. Ideally I would like to use keyframes every 1-2 seconds because I work with fast-paced video, but I know that sends a lot of extra data. Same with Datarate Window. Can someone help explain the significance of this one.
3)Under the output panel, I am not currently using the auto adjust function. Should I enable this when my bandwidth takes a hit? If so, which is preferable, dropping frames or degrading quality? Any explanation wuold be very helpful.
4)Should I deinterlace my video? We have a 3-camera shoot using Canon XL2's and a DataVideo Switcher. Everything is analog SD.
I am able to drop by bitrate down to 600K and the stream does not buffer, but it starts to get pixelated. I would think that 3mbps upload bandwidth is enough to stream at 800k. Any help adjusting my settings to shapen the imagine would be greatly appreciated.
Thanks.

1) Should I capture my video bigger than 640x360 and have FMLE shrink it, or capture it at the same size I want to output it at?
--> Always capture at the same size, unless the device/card doesn't support that size.
2) In the Format advanced encoder settings, What should I set as my keyframe, quality, and datarate window. Ideally I would like to use keyframes every 1-2 seconds because I work with fast-paced video, but I know that sends a lot of extra data. Same with Datarate Window. Can someone help explain the significance of this one.
--> Data rate window is useful for unexpected source data that might not encode well within the specified bit-rates. For example, if you set data rate window to "tiny" and a complex frame (source data) arrives, then encoder will not allocate some extra bits to encode that frame in good quality. But if you set the window to huge, then that complex frame will be encoded in good quality by allocating more bits to it. So, basically, the "delta" around the specified bit-rate increases on moving from "tiny" to "huge" data rate window. Your output bit-rate will vary more in case of "huge" setting.
3)Under the output panel, I am not currently using the auto adjust function. Should I enable this when my bandwidth takes a hit? If so, which is preferable, dropping frames or degrading quality? Any explanation wuold be very helpful.
--> I can explain the difference between the 2 options and you can experiment with both and stick to one, which gives a better user experience under your bandwidth conditions.
a. Once the auto-adjust feature triggers, Drop frames option will intelligently drop some frames. As a result of this, you might observe video stalling depending upon the severity of the bandwidth conditions.
b. Once the auto-adjust feature triggers, Degrade quality option with a min. video bit-rate value of say 500 kbps will try to encode all the frames within this 500 kbps limit. As you are reducing the bit-rate from the original value of say 800 kbps, the quality is bound to degrade. If you check the "preserve per frame quality" option then the encoder will encode >=50% of the frames within the specified bit-rate of 500 kbps. As the no. of frames are less the per frame quality will be better than the previous case. There is a possiblity that even after degrading quality, the buffer is exceeding the given limit then the degrade quality option will automatically switch to the drop frames option.
4)Should I deinterlace my video? We have a 3-camera shoot using Canon XL2's and a DataVideo Switcher. Everything is analog SD.
--> Deinterlace option is only available for video sizes >= 640x480.

Need help with JSSE settings for Axis2 auto-generated client.

Hi all.
I have several working clients generated for me in Axis2 from WSDL's using wsdl2java utility. The clients use HTTP transport but I need to use HTTPS now. I assume JSSE is used for SSL communication in Axis2.
I have created the keystore and set these parameters in code.
System.setProperty("javax.net.ssl.trustStore", "/path/to/.keystore");
System.setProperty("javax.net.ssl.trustStorePassword", "changeit");
The lower level mechanics such as socket creation and utilization are hidden from me in Axis2.
What other ssl parameters can be set similar to these? I particularly care about protocol, cipher, keep-alive? I couldn''t find the whole list with possible values. Or may be I should use some different method to set them?

Hi,
While creating the stub use https as end point instead of http.
example: https://java.bytesforall.org/webservices
Configure the properties for the SSL and so that jsse be have accordingly
https.cipherSuites,javax.net.ssl.trustStore ...etc.
If you are planning to make your webservice client FIPS complaint. Currently there is a problem with Axis1.4 it is not honoring the property "https.cipherSuites" to use the cipher suites.
Let me know, if you need any further help
~Balaji

Msi p67a gd65 with p67a gd80 beta bios

hi to everyone here,
i have purchased a pc and have a msi p67a gd65 mobo
i noticed that on the actual mobo it clearly states its a p67a gd65 i have verified this , its defnately a gd65
how ever, cpu z detects it as a p67a gd80, also command centre detects a p67a gd80, bios version is : P67A GD80 10.3b2
so my mobo has a gd80 beta bios...
i do not know how it came about as im not owner from new
question 1 : all i need help with is flashing back to gd65 bios (bios 1.19 ] , do i need to do a blind flash to force update ? and how do i do it ? because its gd65 not gd80
question 2 : and also how do i check if both bios chips were flashed to this beta bios ?
question 3 : do i flash both bios chips when i do the bios flash ?
question 4 : how do i switch between the 2 bios chips ?
sorry for all the questions, the main question is question 1
thnx guys

Quote from: PirateDog on 17-November-13, 03:50:12
In my experience, for a 2700k, UEFI/BIOS v1.H proved to be the very best one.
I would go ahead and use what P D says there, he did a lot of testing on his many builds the past few years and knows more about it that most other people.
What I had in my last reply was just the basic required info you needed to answer question about 2700K support after going through 1/2 dozen lists needed to find my info.

Best Settings for HD output with Still Photos and Audio?

I am creating a 1 minute audio presentation that I would like to add photos and text titles to. What are the best sequence settings for this?

Joe,
Thanks for your help. Would these be HDV settings, NTSC (?), PAL...etc?
I guess I just want it to look good. I'm a photographer and not a videographer so this is all new to me. I've just made some quick little videos (only about 4) in the past with Premiere. I'm much more familiar with Photoshop, but I thought this would be an easy project. I just don't want my photos to show up blurry. I'm in the US, so I think there is a difference for that with the NTSC and PAL settings, but I don't even know if I should use one of those or if it's one of the other endless options up there.
Are the ones you said just different sizes that the videos can be enlarged to and show clearly at an enlarged size? (Sort of like dpi?)

What is the difference between MSI P67A-GD65 with P67A-GD65(B3)

please help me

Quote
P67A and P67A-GD65-GD65 (B3)
What exactly are you talking about?
Quote
please help me
Help you with what? Help you how?

MOVED: what is the difference between MSI P67A-GD65 with P67A-GD65(B3)

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=148725.0

Quote
P67A and P67A-GD65-GD65 (B3)
What exactly are you talking about?
Quote
please help me
Help you with what? Help you how?

Which H.264 settings for Blu ray with mixed assets

Hi,
I am still learning with the different options that I can chose in Encore for transcoding an asset but I am not sure what to chose.
I created a project in PP which uses the following formats 1080i/25,1080i/50, 720p/23,976 and 1080p/25.
the main scenes in PP is in 1080i/25. Most clips are documenting sports or moving objects.
If I use the automatic transcoding setting in Encore, it will be transcoded in 1080i/25 but is this really good? Although I am in a PAL region I think, for Blu Ray, I could also use NTSC settings like 1080p/25.
What shall I do?
Thanks

Hi,
I am still learning with the different options that I can chose in Encore for transcoding an asset but I am not sure what to chose.
I created a project in PP which uses the following formats 1080i/25,1080i/50, 720p/23,976 and 1080p/25.
the main scenes in PP is in 1080i/25. Most clips are documenting sports or moving objects.
If I use the automatic transcoding setting in Encore, it will be transcoded in 1080i/25 but is this really good? Although I am in a PAL region I think, for Blu Ray, I could also use NTSC settings like 1080p/25.
What shall I do?
Thanks

Help with OC settings for P67A-GD65 with i5 2500k using v1.E BIOS

Similar Messages

Maybe you are looking for