Help with optimization -- too many records being inserted

hi..
I am doing this project. This project is as a part of a project competition, and hence the analysis part is already done.I am not supposed to make any changes in the design and the database part.In this project, I have to make an entry form for entering information for schools.
The project is web based, JSP+DB2. There is only one single form and that contains 30+ fields, and there are around 7-8 tables. Form is submitted only once, and on that submission 280 records have to inserted into the database. Problem is I cannot change any of the design, form or database. If on a single submission, if such a large amount of records are inserted, and that to considering its a website, then the response would be extremely slow. So can anyone of you help me with ideas that I can implement, so that any optimization can take place.
Thanks in advance.

As I told this project is of a competition, and has to be implemented in rural areas, hence I cannot be sure as to what will be the server and client configuration. What i want to know is that is there a way that I do not have to insert 280 records in one go. May be insert data in some temporary tables, and then transfer it to the final tables at the time of successful completion. Is this solution feasible, and are there any other such solutions available??

Similar Messages

Help with Audio Playback While Recording

I am an aspiring sound engineer and I am having a problem with recording in Audition 3.0 that I need help with. When i record vocals, the sound wave plays back in the speakers/headphones with like a 1.5 second delay after it is recorded. It really throws off the artists I am working with when they are trying to record vocals. How do i kill headphone/speaker playback while someone is recording?

There are problems with a lot of internal soundcards in a lot of laptops, and these seem to be so many and various that all you can do is use trial and error and hope for the best.
External soundcards should cure any problem, but you may have to look into what else is running on the laptop, as so much is integrated, and some machines seem to have audio problems caused by wireless or other network adaptors etc.
As I said, I use oldish Edirol and Tascam usb units. The Tascam has a known fault (noise when using a guitar channel at the same time as phantom powering a mic on the other channel) which I can live with, and I would hope has been solved in later and current versions. The Edirol is fine. I use 2 units to give me the connections I want (ie one has jacks, the other phono plugs, and different size headphone sockets). Both these have asio and wdm drivers and work fine with AA 3.0 here. More modern devices will be usb2 and will presumably provide more channels or higher sampling rates, but these are fine. Others will be more up to date than me, but I would think anything from Tascam, Edirol, Echo Audio and I think most m-audio models should be fine. Just be wary of anything from Creative Labs. I, too, have had bad experiences with one of their products (it drew too much current from the usb port on a couple of the laptops so I never got as far as to find whether it had asio drivers working or not). But others will be more up to date than I am.
I just went onto ebay over the years and kept bidding on sensible looking devices until I got ones at the right price, but it probably is better to buy new if you can afford it.
Sorry I can't give a more definite answer.

Report timing out, "Too many records"

I am using CR XIR2 with a univers that I created to run an inverntory report. The report works fine in the designer but when I go to run it from the CR Server It times out. (Very quickly). If I put filters and only pull a subset of the data the report works fine. This issue is there should not be too many records. Where can I check to make sure that there are no limitations set and I can get all of the records? I have set the parameters for the Universe to no limit records or time to execute. Is there any place else I can check? or any other ideas?
Thanks

What viewer do you use?
If the viewer is ADHTML, you are using the RAS (Report Application Server). In that case, you need to set the number of (db) records to read in the RAS properties on the CMC.
If the viewer is DHTML, Java or ActiveX, you are using the CR Page Server. You will need to set the number of db records to read in the Cryatal Reports Page Server properties on the CMC.

Function error: Too many records

I have writing a function that needs to return the total count of a sql statement. It will divide two calculated columns to get an average. I have two versions. Version 1 compiled successfully and I am trying to either run it in Reports or in the database and call it. I get an error stating that the function returns too many records. I understand that is a rule for stored functions but how can I modify the code to get it return one value for each time it is called?
Here is the main calculation. SUM(date1-date2) / (date1-date2) = Avg of Days
version1:
create or replace FUNCTION CALC_OVER_AGE
RETURN NUMBER IS
days_between NUMBER;
days_over NUMBER;
begin
select (determination_dt - Filed_dt), SUM(determination_dt - Filed_dt) into days_between, days_over
from w_all_cases_mv
where (determination_dt - Filed_dt) > 60
and ;
return (days_between/days_over);
END CALC_OVER_AGE;
version2:
CREATE OR REPLACE FUNCTION CALC_OVER_AGE (pCaseType VARCHAR2)
RETURN PLS_INTEGER IS
v_days_between W_ALL_CASES_MV.DAYS_BETWEEN%TYPE;
v_total NUMBER;
days_over NUMBER;
i PLS_INTEGER;
BEGIN
SELECT COUNT(*)
INTO i
FROM tab
WHERE case_type_cd = pCaseType
AND determination_dt - Filed_dt > 60;
IF i <> 0 THEN
select SUM(determination_dt-Filed_dt), days_between
into v_total, v_days_between
from tab
where determination_dt - Filed_dt > 60;
RETURN v_total/v_days_between;
ELSE
RETURN 0;
END IF;
EXCEPTION
WHEN OTHERS THEN
RETURN 0;
END CALC_OVER_AGE;

Table Structure:
WB_CASE_NR NUMBER(10)
RESPONDENT_TYPE_CD VARCHAR2(10)
INV_LOCAL_CASE_NR VARCHAR2(14)
CASE_TYPE_CD VARCHAR2(10)
FILED_DT DATE
FINAL_DTRMNTN_DT DATE
REPORTING_NR VARCHAR2(7)
INVESTIGATOR_NAME VARCHAR2(22)
OSHA_CD VARCHAR2(5)
FEDERAL_STATE VARCHAR2(1)
RESPONDENT_NM VARCHAR2(100)
DAYS_BETWEEN NUMBER
LAST_NM VARCHAR2(20)
FIRST_NM VARCHAR2(20)
DETERMINATION_DT DATE
DETERMINATION_TYPE_CD VARCHAR2(2)
FINAL_IND_CD VARCHAR2(1)
DESCRIPTION VARCHAR2(400)
DETERMINATION_ID NUMBER(10)
ALLEGATION_CD VARCHAR2(1)
ALGDESCRIPTION VARCHAR2(50)
Output is for Reports, I am trying to get the last calculation, which is the Average Days. The reports is grouped on Case Types and has several bucket counts for each like this.
Case Type Count All Completed Pending Over Age Avg Days
A 5 3 4 2 15
Z 10 7 6 3 30
4 8 3 5 4 22
To get the Avg Days, the Over Age calculation is used as well as the Days Between (Determination_Dt - Filed_Dt). That is the (date1-date2) example that I gave in my first post. So the calcuation would be the SUM(Days_Between) / Days_Between.

I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book. I got Norton Internet Security for Mac, and now my Mac is running slow, with way too many spinning beach balls of death. Was it a mistake to install Norton?

I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book. I got Norton Internet Security for Mac, and now my Mac is running slow, with way too many spinning beach balls of death. Was it a mistake to install Norton?

yankeecat wrote:
I have a 4 yr. old iMac. I recently got a trojan on it that sent out emails to my address book.
There is no such Trojan or other malware known today that will do that using OS X nor has there ever been one. The most probable explanation is that somebody hacked into your e-mail account on the server, so you should change that password to something stronger right away. If it had come from your Mac then there would almost certainly be copies of those messages in your Sent Mail mailbox.

Special Ledger Roll up: too many records created in receiver table

Hello,
When I execute roll up from 1 special ledger to another special ledger (leaving out a number of fields) 4 records (postings) are selected but in the receiver table there are 92 records created (4*23) so 88 records too many. For each selected record in the sender table 7 records contain only 0 amounts and have an incorrect RPMAX value (starting with 16 till 336). The 8th record has an amount and has the correct RPMAX value: 352). In Sender and Receiver Ledger fiscal year variant Daily Balance is assigned (= each day is a period). Any hint how to prevent the empty records?

Installing the patch, re- importing the SAP Provisioning framework (I selected 'update') and recreating the jobs didn't yield any result.
When examining pass 'ReadABAPRoles' of Job 'AS ABAP - Initial Load' -> tab 'source', there are no scripts used .
After applying the patch we decided anyway to verify the scripts (sap_getRoles, sap_getUserRepositories) in our Identity Center after those of 'Note 1398312 - SAP NW IdM Provisioning Framework for SAP Systems' , and they are different
File size of SAP Provisioning Framework_Folder.mcc of SP3 Patch 0 and Patch 1 are also exactly the same.
Opening file SAP Provisioning Framework_Folder.mcc with Wordpad : searched for 'sap_getRoles' :
<GLOBALSCRIPT>
<SCRIPTREVISIONNUMBER/>
<SCRIPTLASTCHANGE>2009-05-07 08:00:23.54</SCRIPTLASTCHANGE>
<SCRIPTLANGUAGE>JScript</SCRIPTLANGUAGE>
<SCRIPTID>30</SCRIPTID>
<SCRIPTDEFINITION> ... string was too long to copy
paste ... </SCRIPTDEFINITION>
<SCRIPTLOCKDATE/>
<SCRIPTHASH>0940f540423630687449f52159cdb5d9</SCRIPTHASH>
<SCRIPTDESCRIPTION/>
<SCRIPTNAME>sap_getRoles</SCRIPTNAME>
<SCRIPTLOCKSTATE>0</SCRIPTLOCKSTATE>
-> Script last change 2009-05-07 08:00:23.54 -> that's no update !
So I assume the updates mentioned in Note 1398312 aren't included in SP3 Patch 1. Manually replaced the current scripts with those of the note and re- tested : no luck. Same issue.
Thanks again for the help,
Kevin

Help with 'Send to Many" on 5210 please

I am getting closer to the answer I need about sending a text message to as many people as possible from as inexpensive a phone as possible. Thanks to Jalisinfo for your help with my previous post. I have pasted below the response I have been sent from the Nokia care team to my question. Can anyone help with the part they were unable to answer about how many recipients I would be able to send to using this phone? I need to be able to send to about 70 contacts. All the recipients would be the only people in the contacts list.
"Pertaining to our previous email, the Nokia 5210 does not support the SMS distribution list feature. On this device, you can send SMS to more than one contacts. This feature is known as "Send to many".
We are unable to advise on the number of contacts you can send the SMS at one time."
Thanks to you all for your help.

oops

Safari with IIS: Too many connections?

Has anyone out there any experience using Safari with Microsoft's IIS? In particular, the 'Personal Edition' of IIS that only allows 10 concurrent connections?
I'm finding that whenever I access one of the websites running on IIS using Safari, I can only click through a limited number of pages before I get an error message from the IIS server: "Too many people are trying to connect to this server."
It's almost as if Safari is treating each request as a new connection. I don't have this problem running Firefox or IE. Come to think of it, I never had this problem before Tiger!
I'm using a PC running IIS as a testing server for my ASP-based websites.
Any ideas ... anyone? :o)
Kind regards,
Oli Trenouth
Media Developer

This is a bit sad -- I'm answering my own post :o)
In case anyone is interested, I think I may have found a workaround. Aparently the problem is related to the HTTP Keep-alive request. I guess Safari is trying to keep to many connection alive, and running up a bill on the server.
One way around this is to turn off the Keep-Alive setting within IIS, however this causes problems if you're using authentication on your site. The alternative is reduce the session timeout to something small, such as 5 or 10 seconds.
Luckily my site doesn't rely on session states, so I'm ok there!
I guess the real solution is to get a proper webserver
If anyone has any better suggestions, I welcome your comments.
Many thanks,
Once again,
Oli Trenouth.

Mail Alert with Triangle Exclamation Mark with iMap - Too Many Connections?

I have one Laptop (Macbook mid-07) on Leopard 10.5.6 and a Macbook Pro 09 on Leopard 10.5.8. I just switched over to iMap where I have two email accounts set up on both laptops. Both laptops have identical accounts set up on them.
I'm currently geting the triangle with the exclamation mark alert on the inboxes of both accounts when both laptops have Apple Mail open. Is this an issue with Apple Mail or my Service Provider possibly complaining that I have too many connections? I don't get these alerts when only one laptop has the Mail App open. The alert reads:
Alert
There may be a problem with the mail server or the network. Check the settings for the account "IMAP" or try again.
The server error encountered was: The attempt to read data from the server "mail.mydomain.com" failed.
However, Mail seems to send and receive okay with the alerts popping up and so I'm not sure if this alert is anything to be serioulsy concerned about. Or, is there a way to fix this?

I set mail to fetch messages every 15 minutes where I delayed one laptop in opening up mail initially by 5 minutes. That way, both laptops are not fetching mail concurrently and there's a gap of time for them to download mail before the other starts. This seemed to have fix this alert issue and I'm no longer getting these messages.
Although, 15 minutes seems to be a bit long for auto fetching since my email can be under some time constraints. Does anyone know how to set the time to check every 10 minutes which I can probably live with? Currently, I have the option to set for 1 minute, 5 minutes, 15 minutes, 30 minutes, 1 hour, or manually.

Help needed : javamail Too many simultaneous connections

Hello
i'm using javamail to develop a webmail
i've created a service Class , and all things works well , but i have a serious problem when i browse my webmail ( viewing folders: inbox / spam / etc or messages) i get an error saying :
Too many simultaneous connections. (Failure)
i know that the imap server dosen't support more than 10 simultaneous connections.
But i can't say to users using my webmail to do not a lot of actions !!! , and also when i use thunderbird for example it works fine without errors even if i do a lot of actions/connections
How can i solve that problem ?
Thanks
A1 OK [email protected] authenticated (Success)
A2 CAPABILITY
* CAPABILITY IMAP4rev1 UNSELECT LITERAL+ IDLE NAMESPACE QUOTA ID XLIST CHILDREN X-GM-EXT-1
A2 OK Success
A3 SELECT INBOX
DEBUG: no connections in the pool, creating a new one
* FLAGS (\Answered \Flagged \Draft \Deleted \Seen)
* OK [PERMANENTFLAGS (\Answered \Flagged \Draft \Deleted \Seen \*)]
* OK [UIDVALIDITY 616267767]
* 7 EXISTS
* 0 RECENT
* OK [UNSEEN 1]
* OK [UIDNEXT 90]
A3 OK [READ-WRITE] INBOX selected. (Success)
A4 STORE 1 +FLAGS (\Seen)+
+* OK Gimap ready for requests from MyIP 24if2631473eyx.55+
+A0 CAPABILITY+
+* 1 FETCH (FLAGS (\Seen))+
+A4 OK Success+
+* CAPABILITY IMAP4rev1 UNSELECT IDLE NAMESPACE QUOTA XLIST CHILDREN XYZZY+
+A0 OK Thats all she wrote! 24if2631473eyx.55+
+A1 LOGIN myemail mypwd+
+A1 OK [email protected] authenticated (Success)+
+A2 CAPABILITY+
+* CAPABILITY IMAP4rev1 UNSELECT LITERAL+ IDLE NAMESPACE QUOTA ID XLIST CHILDREN X-GM-EXT-1
A2 OK Success
A3 SELECT INBOX
* FLAGS (\Answered \Flagged \Draft \Deleted \Seen)
* OK [PERMANENTFLAGS (\Answered \Flagged \Draft \Deleted \Seen \*)]
* OK [UIDVALIDITY 616267767]
* 7 EXISTS
* 0 RECENT
* OK [UNSEEN 1]
* OK [UIDNEXT 90]
A3 OK [READ-WRITE] INBOX selected. (Success)
A4 STORE 1 +FLAGS (\Seen)
* OK Gimap ready for requests from MyIP 23if2388548eya.46
A0 CAPABILITY
* 1 FETCH (FLAGS (\Seen))
A4 OK Success
* CAPABILITY IMAP4rev1 UNSELECT IDLE NAMESPACE QUOTA XLIST CHILDREN XYZZY
A0 OK Thats all she wrote! 23if2388548eya.46
A1 LOGIN custom.infoma1 mypwd
A1 NO [ALERT] *Too many simultaneous connections. (Failure)*
A2 LOGOUT
* BYE Logout Requested 23if2388548eya.46
A2 OK Quoth the raven, nevermore... 23if2388548eya.46
A4 CLOSE
A4 CLOSE

Thunderbird supports disconnected or offline operation. It can disconnect from the server and then reconnect later
and synchronize its state, so that you never know it was disconnected.
You can do that too, but it's a lot of work.
For webmail, the simplest approach is usually to have only one folder open at a time for each user.
If your IMAP server is limiting you to 10 connections total, across all users, get a new IMAP server.

Hello, I would like to download my contacts from icloud to a flash drive in order to print out. Can anyone help with this? Many thanks

Hello, I would like to download my contacts from icloud to a flash drive in order to have them printed out as I have over 4,000 contacts. Could anyone help with this? Thank you

This this discussion > https://discussions.apple.com/message/24150181#24150181

Help with optimization please

Hi,
I have a query that is lagging in ORACLE while on SQL Server it is instantaneous. I've been trying to rewrite it for Oracle and I still get the same explain plan over and over.
In SQL My explain plan looks like this
SELECT statement
        Nested LOOP
                 INDEX SEEK
                 INDEX SEEKIn oracle I keep getting
SELECT statement
        HASH JOIN
                 TABLE ACCESS
                 TABLE ACCESSHere's my data
I have a table with around 1000 000 records.
the table was created with this
create table table1 ( ID1 varchar(32), ID2 varchar(32) )
alter table table1 add constraint pk_table1 primary key (ID1,ID2)so I'm trying to do this
select b.ID2 from table1 a join table1 b on a.id1 = b.id1 and a.ID2 != b.ID2 where a.ID2 = '7284'Any IDEA how to fix this ?
Edited by: user6127069 on May 6, 2009 6:47 AM
Edited by: user6127069 on May 6, 2009 6:51 AM
Edited by: user6127069 on May 6, 2009 6:52 AM
Edited by: user6127069 on May 6, 2009 6:53 AM
Edited by: user6127069 on May 6, 2009 6:54 AM
Edited by: user6127069 on May 6, 2009 6:58 AM

I don't get the logic of your SELECT statement.
Why would you join TABLE1 to itself in this way?
SQL> select * from table1;
ID1                              ID2
A                                7280
A                                7281
A                                7282
A                                7283
A                                7284
A                                7285
A                                7286
B                                7280
B                                7281
B                                7282
B                                7283
B                                7284
B                                7285
B                                7286
14 rows selected.
SQL> select b.ID2
2 from   table1 a
3 join   table1 b
4         on a.id1 = b.id1 and a.ID2 != b.ID2
5 where a.ID2 = '7284';
ID2
7280
7281
7282
7283
7285
7286
7280
7281
7282
7283
7285
7286
12 rows selected.

Master data failed with error `too many duplicate records'

Dear all
below is error message
            Data records for package 1 selected in PSA -
            error                                                 4 in the update
LOng text is giving as below
Error              4 in the update
Message no. RSAR119
Diagnosis
The update delivered the error code                                                   4.
Procedure
You can find further information on this error in the error message of the update.
WOrking on BI - 7.0
any solutions
Thanks
satish .a

Hi,
Go through these threads, they have same issue:
Master data load: Duplicate Records
Re: Master data info object - duplicate records
Re: duplicate records in master data info object
Regards
Raj Rai

Help with dynamic datasource and record selection

Hi, I'm having some difficulty with part of an application I'm trying to build, but here's some background first. I am a student at the University of Maryland, and I'm writing an application for one of the departments here at the university. It is sort of a front-end for an access database with a lot of extra functionality. This includes reports. First of all, the user can change the databse that the application uses, so I store that in an appsetting. For this reason, I have to tell the report what database to use at runtime rather than using the database expert. I am building a sort of report wizard in which the user selects certain values, and based upon those values, the SQL statement that the report gets data from changes. So almost everything about the report's data is dynamic and will be determined at runtime. So for example if the user chooses an officer report by chapter names, I do this (chapters is a comma delimited string): string sel = "SELECT * FROM [Undergrad Leadership] WHERE [Leadership Position] = '" + txtPosition.Text + "' AND [Chapter Name] IN (" + chapters + ");"; The part I am lost on, is how to actually interface with crystal reports. In the following code, conn is an OleDbConnection to the correct database, rep is the ReportDocument, and view is a CrystalReportsViewer. rep.DataSourceConnections[0].SetConnection(conn.DataSource, conn.Database, false); rep.RecordSelectionFormula = sel; view.ReportSource = rep; When I try to load the report, I get the following error message: Error in formula <Record Selection>: a number, currency amount, boolean, date, time, date-time, or string is expected here. Also, assuming this formula gets fixed, how do I actually get fields from this formula and datasource onto my report, since I can't do it at design time? Thanks in advance for the help. -Jared 

RCAPI (Report Creation and Modification) calls are only available with Crystal Reports Server RAS SDKs. This means that using the bundled version of Crystal Reports for Visual Studio will not allow you to place fields onto the report. A free copy of Crystal Reports Server comes with a registered copy of Crystal Reports Developer. My guess is that you don't have either of these products and that you are just using the product that came with Visual Studio.All is not lost. The first question is, do you really need to add the fields at runtime? In many cases developers just want to have control of the data that gets sent to the report and they are ok with having the same fields display.In your code you are changing the datasource which is fine, and you are assigning a Record selection formula which is also fine. The problem with the record selection is that it doesn't fit the syntax of the Report. I would suggest printing out the value that you programatically get for the formula and insert it into the Crystal Report Designer. You will probably get the same error there and gets some hints as to why it doesn't work.What I would suggest is creating a template report that already has the fields on the report and then change its datasource at runtime and add a RecordSelectionFormula.Otherwise you will have to use RAS to be able to add fields at runtime. Rob Horne <a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/blog/10</a>

ABAP - CUA : Initial load : too many records in the CUA?

We are running :
SP03 for IDENT. CENTER DESIGNTIME 7.1 Patch 0
SP03 for IDENTITY CENTER RUNTIME 7.1 Patch 1
SP03 for NW IDM IC UIS 7.00 Patch 1
We have connected our customer's CUA system to IdM : we created an Identity Store called 'SAP_Master', created the CUA repository, defined the required attributes as defined in the guide 'IDM 7.1 - IdM For SAP Systems - Configuration 7-3.pdf', created the jobs based upon the templates etc. The dispatcher used has 'run provisioning jobs' disabled.
On our sandbox server, when we connect to our sandbox CUA system (CUA_YS5_200), everything is ok, the 'AS ABAP - Initial load' job with only 'ReadABAPRoles' enabled, runs fine.
On our QA system, when we connect to our 'production' CUA system (CUA_YP0_400), the 'AS ABAP - Initial load' job with
only 'ReadABAPRoles' enabled, finished with message 'could not start job, rescheduling'. Since there is a huge number of records (we looked it up in the system : 311.679 records), we decided to switch on parameter 'bootstrap job'. Now the result is that it takes forever, after half a day the job is still running. In the database, table 'sapCUA_YP0_400role' is still completely empty (no records). Therefore, it seemed interesting to connect our QA IdM system to our development CUA system (CUA_YS5_200). After a while, the exact same job has finished and table 'sapCUA_YS5_200role' contains 18.580 records.
After some additional testing, we might have discoved the cause of the issue could be that the number of records in our CUA is too big.
In the java code of the fromSAP pass there are 2 calls to the SAP system for reading the roles into Idm. The first one reads table USRSYSACT (311.000 records), the second one reads table USRSYSACTT (1.000.000 records). All these records are stored into a java hashmap - we think that 1 million records exceeds the hashmaps capability, although no java error is thrown.
When we debug the functionmodule RFC_READ_TABLE and change the rowcount to 100.000 then everything works fine. When we set the rowcount to 200.000 the java-code does not generate an error but the job in idm never
ends...
When running functionmodule RFC_READ_TABLE in the backend system the 1.000.000 records are processed in less than one minute. So apparently, the issue is related to the processing in the Java code.
Java Dispatcher heap size is set to 1024.
Anybody already came accros this issue?
Thanks & best regards,
Kevin

Installing the patch, re- importing the SAP Provisioning framework (I selected 'update') and recreating the jobs didn't yield any result.
When examining pass 'ReadABAPRoles' of Job 'AS ABAP - Initial Load' -> tab 'source', there are no scripts used .
After applying the patch we decided anyway to verify the scripts (sap_getRoles, sap_getUserRepositories) in our Identity Center after those of 'Note 1398312 - SAP NW IdM Provisioning Framework for SAP Systems' , and they are different
File size of SAP Provisioning Framework_Folder.mcc of SP3 Patch 0 and Patch 1 are also exactly the same.
Opening file SAP Provisioning Framework_Folder.mcc with Wordpad : searched for 'sap_getRoles' :
<GLOBALSCRIPT>
<SCRIPTREVISIONNUMBER/>
<SCRIPTLASTCHANGE>2009-05-07 08:00:23.54</SCRIPTLASTCHANGE>
<SCRIPTLANGUAGE>JScript</SCRIPTLANGUAGE>
<SCRIPTID>30</SCRIPTID>
<SCRIPTDEFINITION> ... string was too long to copy
paste ... </SCRIPTDEFINITION>
<SCRIPTLOCKDATE/>
<SCRIPTHASH>0940f540423630687449f52159cdb5d9</SCRIPTHASH>
<SCRIPTDESCRIPTION/>
<SCRIPTNAME>sap_getRoles</SCRIPTNAME>
<SCRIPTLOCKSTATE>0</SCRIPTLOCKSTATE>
-> Script last change 2009-05-07 08:00:23.54 -> that's no update !
So I assume the updates mentioned in Note 1398312 aren't included in SP3 Patch 1. Manually replaced the current scripts with those of the note and re- tested : no luck. Same issue.
Thanks again for the help,
Kevin

Help with optimization -- too many records being inserted

Similar Messages

Maybe you are looking for