Help with Oracle 9i/10g on RedHat 4?

If anybody can help would be greatly appreciated...
I get the same error with Oracle 9i & 10g when installing on Red Hat Fedora 4, it's java related...
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2007-03-16_01-09PM/jre/lib/i386/libawt.so: connat restore segment prot after reloc: Permission Denied
Red Hat Fedora is weak on java, it only has the Java 1.4 JRE installed. I tried to upgrade to Sun's JRE 6 but got dependency errors.
Jon

Red Hat Fedora 4Does not exist.
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2007-03-16_01-09PM/jre/lib/i386/libawt.so: connat restore segment prot after reloc: Permission DeniedSolution 1: Modify /etc/selinux/config and change value of SELINUX to "disabled" and reboot computer.
Solution 2: Upgrade selinux-policy-targeted-1.25.2-4.noarch.rpm (Use command: "yum upgrade selinux-policy-targeted")
Red Hat Fedora is weak on java, it only has the Java 1.4 JRE installed. I tried to upgrade to Sun's JRE 6 but got dependency errors.??? OUI does not have to do with external JRE.
Oracle Installation comes with bunled JRE.
If you are using Fedora then you might consider these articles useful:
http://ivan.kartik.sk/oracle/install_ora9_fedora.html
http://ivan.kartik.sk/oracle/install_ora10gR2_fedora.html

Similar Messages

Need help with Oracle reports 10g

Hi
we have a requirement in a oracle 10g application
this application is on the unix server
the requirement is such that the user must be able to print a report directly to the default printer
when the user clicks on the button a report must be printed on the users default printer
can u help us understand that how can we configure the local printer of the user on the unix server?

hi, piyush9010
Check this following link...
Oracle reports 10g output directly to printer
Oracle reports 10g output directly to printer
Make your printer as shared printer then try.
Use DESTYPE=PRINTER.
http://qamarsyed.blogspot.com/2011/02/how-to-print-oracle-report-to-network.html
http://docs.oracle.com/cd/E14571_01/bi.1111/b32121/pbr_cla005.htm#i637246
Hope this helps
If someone's response is helpful or correct, please mark it accordingly.

Pinging ip's with oracle developer 10g

db and dev 10g rel2 ,
hi all,
i want to ping some ip's through a form built with oracle developer 10g rel2 ,
- i have two choices here ,
-there is an application can ping a lot of ip's automatically , it has options to load a file in which ip's are stored , and another option to save the result into a .csv file ,
so i am searching for a way to control that application , i want a way to do these tasks through a button on my form :
1- open that application .
2 -load the ip's .
3- save the result to a .csv file .
4- transferring the .csv data to a block on my form . -- and this is the simple step which i can do individually , but i do not know how to deal with the steps previously mentioned .
2- the second choice is to open the os command prompt through a button , and ping through it , but the problem is the result would not be displayed in columns , and i do not know a way to load the result into a block on the form.
if you could help me with any of these choices , or if you have another one , i would appreciate that .
thanks in advance

i've tried to use it like it is in the example : , i used only the first two parameters
DECLARE
c utl_tcp.connection; -- TCP/IP connection to the Web server
BEGIN
c := utl_tcp.open_connection(remote_host => 'www.acme.com',
remote_port => 80);
end ; by the way , before i posted the thread , i've tried it , but i faced problems while executing it , that's why i asked if it is
suitable for me or not .
when i execute it by the above code , the engine tells me that "procedure successfully completed , but without any result .
2- if you could tell me what does "remote_port" means , because i posted the number in the example as it is .
i do not know what is port ?
3- do you know about a jave bean can do my requirements ?
thanks a lot

Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0

Hello,
Maybe you can help me (new on RMAN backup) in doing this.
I have configured a single Oracle 10g database to have backup with RMAN with following steps:
1. $ mkdir $ORACLE_BASE/rman_scripts
2. $ mkdir $ORACLE_BASE/logs
3. $ mkdir $ORACLE_BASE/tracking
4. $ mkdir $ORACLE_BASE/c_backup
5. $ sqlplus sys/<password> as sysdba
6. SQL> alter system set db_recovery_file_dest_size = 50G scope=both;
7. SQL> alter system set db_recovery_file_dest='${ ORACLE_BASE}/flash_recovery_ area' scope=both;
8. SQL> alter system set log_archive_dest_10='location= use_db_recovery_file_dest';
9. SQL> shutdown immediate
10. SQL> startup nomount
11. SQL> alter database archivelog;
12. SQL> alter database open;
13. SQL> alter database enable block change tracking using file '${ORACLE_BASE}/tracking/rman_ change_track.f';
14. $ rman target /
15. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '/var/opt/oracle/flash_ recovery_area/ORCL/c_backup/% F';
16. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
17. RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
18. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
19. RMAN> exit
I need to configure incremental backup with RMAN on a two node Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0 installation.
We also use ASM to store database files, and have Oracle software installed on separate file systems (two Oracle roots for Node1 and Node2).
I have following questions:
1) where to put Flash Recovery Area (FRA)?
I saw recommendations to put FRA on the ASM, is this the best way to do it?
2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
3) Is it possible/recommended to run RMAN from Node1 only?
Below is the script used to run RMAN on the normal Oracle database (without RAC) which I need to change :
=============================================================================================
2.0 Oracle backup script: /opt/app/oracle/rman_scripts/backup.sh
Use this for daily backups, possiblly as a cron job.
Once a week run this: /opt/app/oracle/rman_scripts/backup.sh FULL
All other days of the week: /opt/app/oracle/rman_scripts/backup.sh INCREMENTAL
Note: You may have to change ORACLE_SID, ORACLE_BASE below to match your database.
=============================================================================================
#!/usr/bin/ksh
ORACLE_SID=orcl
ORACLE_BASE=/opt/app/oracle
ORACLE_HOME=${ORACLE_BASE}/product/10.2.0/db_1
PATH=${ORACLE_HOME}/bin:/usr/bin
LOGDIR=${ORACLE_BASE}/logs
LOGFILE=${LOGDIR}/rman.log
if [[ $# < 1 ]]
then
echo "usage: backup.sh FULL|INCREMENTAL"
exit;
fi
BACKUPTYPE=${1}
full='FULL'
incremental='INCREMENTAL'
if [[ $BACKUPTYPE == $full ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi
if [[ $BACKUPTYPE == $incremental ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
backup incremental level 1 database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi

Hi [email protected],
Q1) where to put Flash Recovery Area (FRA)?
A1) With RAC: on the shared storage
I saw recommendations to put FRA on the ASM, is this the best way to do it?
If you want your backups to be available for both nodes you have to use shared storage or tape using an mml library.
So if you want to use the FRA for rman backups and the database is on ASM just make ASM the standard for the FRA as well.
Q2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
A2) Than you cannot recover in case Node1 is down. Best would be to send your storage admin to a training course so he can manage the clustered raw devices needed for ASM.
Q3) Is it possible/recommended to run RMAN from Node1 only?
A3) No see A2.
Regards,
Tycho

Manually register rman backup with oracle database 10g

Dear All.
I want to restore full backup of database.
I have not configure flash_recovery_area.
how i can manually register full rman backup of database with oracle database 10g.?
Please help me.
Thanks & Regards
Ravi Kumar

This is the 10gR2 documentation on the CATALOG command :
http://docs.oracle.com/cd/B19306_01/backup.102/b14194/rcmsynta011.htm#sthref230
You must be specific when stating the version you are running. Commands may be limited or unavailable in older versions versus more recent versions of Oracle.
Hemant K Chitale

Does Oracle OLAP comes with Oracle Database 10g ?

1.Does Oracle OLAP comes with Oracle Database 10g or do we need seperate software to have this ?.
2.If I create a Cube with Analytic work space manager the cube is going to be stored in the Database ( meaning the in the table space where OLAP is Stored).
3. What is the difference between Analtyic work space manager and discoverer For Olap.
Help is higly appreciated ..
Thanks, Prasad

One thing to point out : The OLAP option is a costed database option, so while this is automatically installed and part of your database you do have to purchase additional licenses to use this feature. You will need to check with your Oracle account manager to see if you are actually licensed to use this feature.
If you have existing 9i OLAP cubes these can be quickly and easily migrated to 10g OLAP and the documentation explains how to do this. However, there are many new features that are part of 10g OLAP that will improve the performance of your data model that will not be enabled as part of a migration process. Based on my experiences it would be quicker and easier (depending on the size of your existing 9i OLAP cubes) to consider rebuilding your data model using these new 10g features. You should be able to export all the dimensions to XML templates from 9i OLAP and import the templates into the 10g schema and reload your dimensions.
For the cubes you will probably want to consider using partitioning, composites and compression to provide maximum flexibility and performance for your new data model. There is more information on these features within the OLAP documentation and in the many whitepapers and presentations on the OLAP home page on OTN.
For moving data from SQL Server to 10g OLAP much depends on the nature of the data transfer. If it is a one-off bulk data load then you could consider using the normal MS command line tools to dump the data out and transfer it to Oracle. Alternatively, you could consider using Oracle Data Integrator to manage the extraction of the SQL Server data and the data load process into Oracle 10g relational tables. If you decide to use Data Integrator this will require additional licenses.
If you can extract the data from SQL Server to flat files you can use Oracle Warehouse Builder (basic ETL is free as part of the 10g database license) to load that flat file data via external tables. Warehouse Builder can also be used to define your OLAP data model (think of Warehouse Builder as a more powerful version of Analytic Workspace Manager) and provides tools to load the data directly into your OLAP dimensions and cubes. You can get more information on managing OLAP data models with Warehouse Builder the Warehouse Builder home page on OTN.
There are no facilities to modify Discoverer Viewer to add customisations. You can add company logos, modify certain colors and/or hide certain features but it is not possible to add additional features. You may want to consider using BI Beans to provide this type of environment. BI Beans is the development framework used to create Discoverer Viewer. You can create customised JSP pages that look identical to Discoverer Viewer pages with the added benefit of providing your own specific features. You can get more information on the BI Beans home page on OTN.
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

Help with oracle 11g pivot operator

i need some help with oracle 11g pivot operator. is it possible to use multiple columns in the FOR clause and then compare it against multiple set of values.
here is the sql to create some sample data
create table pivot_data ( country_code number , dept number, job varchar2(20), sal number );
insert into pivot_data values (1,30 , 'SALESMAN', 5000);
insert into pivot_data values (1,301, 'SALESMAN', 5500);
insert into pivot_data values (1,30 , 'MANAGER', 10000);
insert into pivot_data values (1,301, 'MANAGER', 10500);
insert into pivot_data values (1,30 , 'CLERK', 4000);
insert into pivot_data values (1,302, 'CLERK',4500);
insert into pivot_data values (2,30 , 'SALESMAN', 6000);
insert into pivot_data values (2,301, 'SALESMAN', 6500);
insert into pivot_data values (2,30 , 'MANAGER', 11000);
insert into pivot_data values (2,301, 'MANAGER', 11500);
insert into pivot_data values (2,30 , 'CLERK', 3000);
insert into pivot_data values (2,302, 'CLERK',3500);
using case when I can write something like this and get the output i want
select country_code
,avg(case when (( dept = 30 and job = 'SALESMAN' ) or ( dept = 301 and job = 'SALESMAN' ) ) then sal end ) as d30_sls
,avg(case when (( dept = 30 and job = 'MANAGER' ) or ( dept = 301 and job = 'MANAGER' ) ) then sal end ) as d30_mgr
,avg(case when (( dept = 30 and job = 'CLERK' ) or ( dept = 302 and job = 'CLERK' ) ) then sal end ) as d30_clrk
from pivot_data group by country_code;
output
country_code          D30_SLS               D30_MGR               D30_CLRK
1      5250      10250      4250
2      6250      11250      3250
what I tried with pivot is like this I get what I want if I have only one ( dept,job) for one alias name. I want to call (30 , 'SALESMAN') or (301 , 'SALESMAN') AS d30_sls. any help how can I do this
SELECT *
FROM pivot_data
PIVOT (SUM(sal) AS sum
FOR (dept,job) IN ( (30 , 'SALESMAN') AS d30_sls,
          (30 , 'MANAGER') AS d30_mgr,
(30 , 'CLERK') AS d30_clk
this is a simple example .... my real life scenario is compliated with more fields and more combinations .... So something like using substr(dept,1,2) won't work in my real case .
any suggestions get the result similar to what i get in the case when example is really appreciated.

Hi,
Sorry, I don't think there's any way to get exactly what you requested. The values you give in the PIVOT ... IN clause are exact values, not alternatives.
You could do something like this to map all alternatives to a common value:
WITH     got_dept_grp     AS
     SELECT     country_code, job, sal
     ,     CASE
              WHEN job IN ('SALESMAN', 'MANAGER') AND dept = 301 THEN 30
              WHEN job IN ('CLERK')               AND dept = 302 THEN 30
                                                                 ELSE dept
          END     AS dept_grp
     FROM     pivot_data
SELECT     *
FROM     got_dept_grp
PIVOT     (     AVG (sal)
     FOR     (job, dept_grp)
     IN     ( ('SALESMAN', 30)
          , ('MANAGER' , 30)
          , ('CLERK'   , 30)
;In your sample data (and perhaps in your real data), it's about as easy to explicitly define the pivoted groups individually, like this:
WITH     got_pivot_key     AS
     SELECT     country_code, sal
     ,     CASE
              WHEN job = 'SALESMAN' AND dept IN (30, 301) THEN 'd30_sls'
              WHEN job = 'MANAGER' AND dept IN (30, 301) THEN 'd30_mgr'
              WHEN job = 'CLERK'    AND dept IN (30, 302) THEN 'd30_clrk'
          END     AS pivot_key
     FROM    pivot_data
SELECT     *
FROM     got_pivot_key
PIVOT     (     AVG (sal)
     FOR     pivot_key
     IN     ( 'd30_sls'
          , 'd30_mgr'
          , 'd30_clrk'
;Thanks for posting the CREATE TABLE and INSERT statements; that really helps!

I need help with oracle

Hi,
I need some help... if someone can help its great.
I need to make a statement in Oracle SQL that read data from a file and insert in a Oracle Database ... if someone can show me the syntax of it i appreciate..
Thanks

Okay, I see you followed the advice in that other thread and started a new post for you question. Congratulations. Your next lesson in forum etiquette is to give your posts a more relevant subject. Pretty much everybody who posts here needs help with oracle; if they need help with cooking catfish they've come to the wrong place.
It that other thread I suggested using SQL*Loader or External Tables might be a more suitable solution. Find out more.
Cheers, APC

Need idea : Integration of CRM On Demand web services with Oracle SOA 10g

Hi Al,
Can anyone have any idea on integration of CRM on Demand Web service with Oracle SOA 10g specially BPEL 10g.
If you have any idea please share with us. Or if you know any good link on the same... please let me know.....
Thanks in advance
Debarshi

AFAIK there is no such mapping available, however you may want to take a look at this Support Community thread that discusses the migration and even gives some samples.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Does ORACLE functions work with Oracle Database 10G

Hi,
I am wondering if ORACLE functions work with Oracle Database 10G or is it mandatory to use OCI functions?
Thanks in advance!

I was able to run a simple query with ora_* functions using 10g on Windows.
The Oracle OCI calls used by PHP's ora extension still exist in the Oracle 10g libraries
But I cannot recommend this obsolete extension.
-- cj

Is Oracle Hyperion SQR Production Reporting certified with Oracle 12 on the redhat linux ?

s Oracle Hyperion SQR Production Reporting certified with Oracle 12 on the redhat linux ?

As per the support matrix Oracle 12 will be supported with 11.1.2.3.500. Check the support matrix at : Supported Platforms Matrices - Oracle Enterprise Performance Management System
Thanks,
KK

Help with Oracle Report Builder and SQL Server2000

Hey guys,
I just installed it Oracle Developer Suite10g with Report Builder and I am trying to use Report builder and wants to connect with SQL Server 2000. The problem that I am running in to is SQL Server 2000 i have is Window Authentication so Does not required to enter user name and password. So how can i connect my report builder to SQL server or is it possible to connect Report builder to SQL server?
Also, I want to create small practice version of database in Oracle how do i do it? what i mean by that is I installed trial version or Oracle developer 10g from www.oracle.com and now trying to get some knowledge with oracle. Could any one can give me some direction in this matter please.
Thank You
Key

Have a look at the reports help for the purpose header and trailer sections. Here is an exert:
"Report sectioning enables you to define multiple layouts in the same report, each with a different target audience, output format, page layout, page size, or orientation. You can define up to three report sections, each with a body area and a margin area: the names of the sections are Header, Main, and Trailer. By default, a report is defined in the Main section. In the other sections, you can define different layouts, rather than creating multiple separate reports. If you wish, you can use the margin and body of the Header and Trailer sections to create a Header and Trailer page for your reports."

How to use LDAP with Oracle forms 10g on Oracle application server

Hi,
I need some help on this. I have developed oracle forms 10g on application server 9iAS. The client want to use the existing LDAP authentication to the software we wrote. I do not know how I could configure to use the existing LDAP authentication . If anyone know how would I use the existing LDAP on different server to use when they logon to our menu in 10g to validate the user. Do I need to add any varibales in formweb.cfg or any other method. Please help.
Thanks
Luksh

I am not quite sure if this works out of the box. According to an Oracle FAQ:
4.2 Can I use LDAP to authenticate Forms Services?
Not directly. However, Oracle Login Server is able to authenticate against a LDAP directory and thus a Forms application can take advantage of this in a SSO environment. But you cannot use access control information stored in a LDAP directory with Forms.

Help Required - Oracle AS 10g

hello,
i have just downloaded oracle 10g softwares ...
i installed database then developer suite ... everything was fine ... until i was unable to run forms ...
a friend of mine told me that i need to install application server in order to run forms ...
1st of all i want to know that is there any way i can run forms without using Oracle AS 10g ...
2ndly i m facing problems in installation of Oracle AS 10g ...
i have studied online documentation but it ain't so helpfull for me ...
it seems like ... i have to install "Oracle AS infrastructure" first and then "Middle-tier: Business Intelligence and forms" ...
i m using P-IV (AMD Athlon XP 2100+, MMX, 1.7GHz Processor) with 512 MB DD RAM and Windows XP Professional with Service Pack 2 as Operating System.
During installation, the installer is warning dat only "Oracle Application Server (J2EE and Web Cache)" and "Oracle Application Server Developer Kits" are supported installations on dis platform ...
what should i do ... urgent help required ...
regards,
yasir ([email protected])

@ brusardl and rkogelhe
thanx for replying ...
brusardl
i didn't changed da port while installing Oracle AS ...
inspite i stopped all services using/listening from dat port ...
now ... i guess there has been some conflict ... as database listner stops automatically just after starting !!!
rkogelhe
can u plz tell me what is BI version of Forms ...
and can i view forms running on web without installing Oracle AS with OC4J bundled in Forms ???
Another Problem:
I re-installed Database, Developer suite and then Oracle AS infrastructure ...
everthing went fine ...
when i installed Oracle AS Middle Tier - Business Intelligence & Forms
during installation ... some configuration assistants failed/skipped ...
da OC4J configration assistant at 5th last position failed ... so remaining 4 configuration assistants were skipped ...
at da end it said ... Installation Succesfull but with some configuration assistants failed/skipped ...
is dis a installation useless ... can i fix dis ?
regards,
yasir

Compatibility with Oracle RAC 10g and E-business 11i ?

Hi netpros,
I am currently helping the sales guys with a tender. The customer requires the solution to be compatible for delivering Oracle RAC 10g and e-business 11i. we are proposing a combination of Cat6509E for the core with Infiniband server switches. Are these devices OK for use with Oracle. I have not much experience with Data centers and so any help is much appreciated.

Hi,
It just so happens Cisco have a paper on exactly this subject (Oracle and e-business 11i) here:
http://www.cisco.com/application/pdf/en/us/guest/netsol/ns50/c649/ccmigration_09186a00807688ce.pdf
The design is somewhat OTT as it includes everything which Cisco thinks may be even vaguely useful, including ACE and FWSM modules. However, it's very useful as a comparison document and does include some good design tips, and the references at the end are also worth following up.
I wouldn't want to get into the whole Infiniband vs Fiber Channel argument (the doc uses MDS switches) but both work just fine in the DC environment.
HTH
Andrew.

Help with Oracle 9i/10g on RedHat 4?

Similar Messages

Maybe you are looking for