Help with oracle listner after trying to change the hostaname on Fedora 9
After searching high and low on the internet for help with this error I am coming here for a little assistance with this issue. A week ago I tried to change the hostname of my machine and the connection to my Db stopped working.
When I type lsnrctl status I get the following messages
TNS-12537: Tns Connection closed
TNS-12560: Tns protocol adapter error
TNS-00507 Tns connection closed
Linux Erro: 29 Illegal seek
Then when I try to run netca I get a java vm error sigsev. Can anyone provide assistance.
This is on an 11g installation
Thanks
Edited by: user5599027 on Jan 27, 2009 2:24 PM
Here is my /etc/hosts file
>
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost localhost
192.168.0.195 localhost
Ive reverted everything in an attempt to get it back and running to no avail. And the user I am using is the same user that installed the product
>
-rwxr-x--- 1 ldhasty ldhasty 187 2007-05-08 00:03 shrept.lst
drwxr-x--- 2 ldhasty ldhasty 4096 2008-06-08 15:53 samples
-rwxr-x--- 1 ldhasty ldhasty 200 2008-06-08 16:01 sqlnet.ora
-rwxr-x--- 1 ldhasty ldhasty 379 2009-01-27 11:07 listener.ora
-rwxr-x--- 1 ldhasty ldhasty 322 2009-01-27 17:11 tnsnames.ora
>
-rwxr-x--- 1 ldhasty ldhasty 136437 2008-06-08 16:01 lsnrctl
Similar Messages
-
I dropped my iPhone 3G last day and soon after that the display turned too dim and it still remains the same.
Could anyone help me with a solution?
Should I change the display or is it a minor damage??
Thanks for your supportsounds like you broke the display when you dropped it. There's nothing we users here can do for you.
Since the iPhone warranty does not cover accidental damage, you will have to pay to have your phone repaired or replaced. You can bring it into Apple for an out of warranty exchange in the country of purchase, or you can find a 3rd party iPhone repair store in your area. -
Need help with my TOP Box--can't change the channels
I can't change the channels, go to Guide or Menu by using the Remote Control. (it's not the remote control because i use this remote for my other topbox and it works fine)
This happened a few hours after i had my Fios installed. (at first, it let me change the channels, then 5 times,2 and now i cant)
Does any one have the same problem and have a solution for this?
Thank you very much.do the front display buttons work? and how close is it to the tv, some tv's create IR interference, and if the set top is too close then it acts how you are describing.
three solutions if that is the case.
move the set top box further away
change the TV brightness and color settings from the "vibrant" setting or whatever brightest they have and then try again
Get an IR Extender so that you can move the IR 'eye' - verizon can send you one, they have them on their site or you can buy one at radioshack.
try moving it further away for a test only, or try to get like a piece of cardboard and shield the eye from the TV. So if the TV is on top put that piece of cardboard inbetween the two, if they are sitting side by side, then put it inbetween the tv so it shields from one another and try it again.
Might not be your problem, but we have seen it before.
Also don't forget to do old faithful, unplugging the power for the set top box, wait 30 seconds plug it back in resolves a lot of minor hiccups. -
Help! Error 2001 after trying to recover the iPhone
Hi everyone!
Please help me if you know the solution to the problem. I cannot turn on the iPhone at all until it is being plugged into my MacBook. Then, iTunes will enter into Recovery Mode but appears to have error 2001. Previously, there was error 1611 appearing as well, but that was only once and became error 2001.
My iTunes is the latest 10.1 (54). I appreciate any ideas!Per http://support.apple.com/kb/ts1275 :
Error 2000-2009: (2001, 2002, 2005, 2006, 2009, and so on) If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. Learn how to reset the SMC. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue continues, it may be related to conflicting security software.
Try that if that doesn't work, try DFU mode. -
iCal is changing the color of my calendars to purple on all my devices even after trying to change it back to the original color. Tried turning them off, same thing.
I, too, had this problem. This is how I fixed it:
Select the calendar that changes color and export the calendar to desktop.
Delete the calendar from ical.
Create new calendar in Ical and name it to your specifications
Go to desk top and choose the calendar you moved and choose to open with Ical. This should import it back to ical.
Go into settings in ical and choose that calendar as your default calendar.
It sounds complicated but is actually easy to do. I hope this helps. -
I am trying to change the email address associated with my existing account to free up my university email address for use in obtaining Creative Cloud. Every time I go to the account settings of my existing account (which currently uses my university email, as I set it up years ago and had no idea it'd eventually cause problems), I enter a different email to use for that account but I continuously receive an error message saying "account changes cannot be saved." It makes me think that it's because the email isn't verified (funny, it actually is verified since it has been the alternate email on the old account for years), but when I click the "send verification email" nothing happens (that is, no email is sent to that other email address).
Anyway, my university is now requiring that faculty create new accounts using our university email addresses in order to register/use Creative Cloud. Am I able to delete my old account, or can anyone help me actually change the email address associated with my old account without getting a "changes can't be saved" error?This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html -
When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?
Hi inharmony35,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden -
Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits
I am not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0 after the forms upgrade 10.1.2.3.0 as per note:Upgrading OracleAS 10g Forms and Reports to 10.1.2.3 (437878.1)
Java/jre upgraded to 1.7.0.45 and JAR files regenerated(without force option). Able to opne forms without any issues.
A)
$ORACLE_HOME/bin/frmcmp help=y
FRM-91500: Unable to start/complete the build.
B)
$ORACLE_HOME/bin/rwrun ?|grep Release
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov
28 14:20:45 2013
Is this an issue? Could anyone please share the fix if faced the similar issue earlier.
Thank You for your time
Regards,Hi Hussein,
You mean reboot the solaris server and then start database and applications services. We have two databases running on this solaris server.
DBWR Trace file shows:
Read of datafile '+ASMDG002/test1/datafile/system.823.828585081' (fno 1) header failed with ORA-01206
Rereading datafile 1 header failed with ORA-01206
V10 STYLE FILE HEADER:
Compatibility Vsn = 186646528=0xb200000
Db ID=0=0x0, Db Name='TEST1'
Activation ID=0=0x0
Control Seq=31739=0x7bfb, File size=230400=0x38400
File Number=1, Blksiz=8192, File Type=3 DATA
Tablespace #0 - SYSTEM rel_fn:1
Creation at scn: 0x0000.00000004 04/27/2000 23:14:44
Backup taken at scn: 0x0001.db8e5a1a 04/17/2010 04:16:14 thread:1
reset logs count:0x316351ab scn: 0x0938.0b32c3b1
prev reset logs count:0x31279a4c scn: 0x0938.08469022
recovered at 11/28/2013 19:43:22
status:0x2004 root dba:0x00c38235 chkpt cnt: 364108 ctl cnt:364107
begin-hot-backup file size: 230400
Checkpointed at scn: 0x0938.0cb9fe5a 11/28/2013 15:04:52
thread:1 rba:(0x132.49a43.10)
enabled threads: 01000000 00000000 00000000 00000000 00000000 00000000
Hot Backup end marker scn: 0x0000.00000000
aux_file is NOT DEFINED
Plugged readony: NO
Plugin scnscn: 0x0000.00000000
Plugin resetlogs scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign creation scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign checkpoint scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Online move state: 0
DDE rules only execution for: ORA 1110
----- START Event Driven Actions Dump ----
---- END Event Driven Actions Dump ----
----- START DDE Actions Dump -----
Executing SYNC actions
----- START DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (Async) -----
Successfully dispatched
----- END DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK'
(SUCCESS, 0 csec) -----
Executing ASYNC actions
----- END DDE Actions Dump (total 0 csec) -----
ORA-01186: file 1 failed verification tests
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1:
'+ASMDG002/test1/datafile/system.823.828585081'
ORA-01206: file is not part of this database - wrong
database id
Thanks, -
Hi I am trying to change the margins and layout of an existing in design document, help!
Hi I am trying to change the margins and layout of an existing in design document, help!
This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html -
Help with oracle 11g pivot operator
i need some help with oracle 11g pivot operator. is it possible to use multiple columns in the FOR clause and then compare it against multiple set of values.
here is the sql to create some sample data
create table pivot_data ( country_code number , dept number, job varchar2(20), sal number );
insert into pivot_data values (1,30 , 'SALESMAN', 5000);
insert into pivot_data values (1,301, 'SALESMAN', 5500);
insert into pivot_data values (1,30 , 'MANAGER', 10000);
insert into pivot_data values (1,301, 'MANAGER', 10500);
insert into pivot_data values (1,30 , 'CLERK', 4000);
insert into pivot_data values (1,302, 'CLERK',4500);
insert into pivot_data values (2,30 , 'SALESMAN', 6000);
insert into pivot_data values (2,301, 'SALESMAN', 6500);
insert into pivot_data values (2,30 , 'MANAGER', 11000);
insert into pivot_data values (2,301, 'MANAGER', 11500);
insert into pivot_data values (2,30 , 'CLERK', 3000);
insert into pivot_data values (2,302, 'CLERK',3500);
using case when I can write something like this and get the output i want
select country_code
,avg(case when (( dept = 30 and job = 'SALESMAN' ) or ( dept = 301 and job = 'SALESMAN' ) ) then sal end ) as d30_sls
,avg(case when (( dept = 30 and job = 'MANAGER' ) or ( dept = 301 and job = 'MANAGER' ) ) then sal end ) as d30_mgr
,avg(case when (( dept = 30 and job = 'CLERK' ) or ( dept = 302 and job = 'CLERK' ) ) then sal end ) as d30_clrk
from pivot_data group by country_code;
output
country_code D30_SLS D30_MGR D30_CLRK
1 5250 10250 4250
2 6250 11250 3250
what I tried with pivot is like this I get what I want if I have only one ( dept,job) for one alias name. I want to call (30 , 'SALESMAN') or (301 , 'SALESMAN') AS d30_sls. any help how can I do this
SELECT *
FROM pivot_data
PIVOT (SUM(sal) AS sum
FOR (dept,job) IN ( (30 , 'SALESMAN') AS d30_sls,
(30 , 'MANAGER') AS d30_mgr,
(30 , 'CLERK') AS d30_clk
this is a simple example .... my real life scenario is compliated with more fields and more combinations .... So something like using substr(dept,1,2) won't work in my real case .
any suggestions get the result similar to what i get in the case when example is really appreciated.Hi,
Sorry, I don't think there's any way to get exactly what you requested. The values you give in the PIVOT ... IN clause are exact values, not alternatives.
You could do something like this to map all alternatives to a common value:
WITH got_dept_grp AS
SELECT country_code, job, sal
, CASE
WHEN job IN ('SALESMAN', 'MANAGER') AND dept = 301 THEN 30
WHEN job IN ('CLERK') AND dept = 302 THEN 30
ELSE dept
END AS dept_grp
FROM pivot_data
SELECT *
FROM got_dept_grp
PIVOT ( AVG (sal)
FOR (job, dept_grp)
IN ( ('SALESMAN', 30)
, ('MANAGER' , 30)
, ('CLERK' , 30)
;In your sample data (and perhaps in your real data), it's about as easy to explicitly define the pivoted groups individually, like this:
WITH got_pivot_key AS
SELECT country_code, sal
, CASE
WHEN job = 'SALESMAN' AND dept IN (30, 301) THEN 'd30_sls'
WHEN job = 'MANAGER' AND dept IN (30, 301) THEN 'd30_mgr'
WHEN job = 'CLERK' AND dept IN (30, 302) THEN 'd30_clrk'
END AS pivot_key
FROM pivot_data
SELECT *
FROM got_pivot_key
PIVOT ( AVG (sal)
FOR pivot_key
IN ( 'd30_sls'
, 'd30_mgr'
, 'd30_clrk'
;Thanks for posting the CREATE TABLE and INSERT statements; that really helps! -
After both (1) changing the password for my Iphone 4S and now (2) loading system 6.1.3 for it (and restoring when Itunes said I must)
- Itunes it will no longer restore all the apps I bought with the old psasword.
How to get them please?
===========================
Sorry - no - all well, they seem to be all coming back - back just after I put this question.
Mysterious to me but very satisfactory.
Profile doubtless that of an ignoramus.Ok, so I was able to find one but the one i'm most diappointed is the "free music" app i purchased and it had hundreds of songs that i didn't put on my desk top to save. So just so we're clear, I cannot get that app back again with all my songs if it wasn't in the "purchased" place?
Also,
my husband has a iphone 4 and i've been trying to connect it to our Garmin GPS through bluetooth. Now both devices recognize it but once a call is made or received, nothing goes through the GPS. I've had it working before but it was before a couple of upgrades. It is currently on ios7.2 upgrade. Is that why it won't work?
Thanks -
Hello,
i try to change the connection string of a Lightswitch 2013 project. I have a database for developers and a 'productive' database for releases. Both are similar (table names, entries etc..) and they are from ORACLE. First i attached the developer database
as an external source. Everything works fine. Now I'm trying to change the connection string whether my application is in a release state or in a developer state.
I found a hint in the following question to solve that issue: Question
from a LS-User
It is possible to change the connection string during the runtime. I tried it out and added to my DataBaseService.lsml.cs:
partial void DataBase_InitializingConnection(DatabaseConnectionState state)
state.ConnectionString = "DATA SOURCE=DB.productive;PASSWORD=password;PERSIST SECURITY INFO=True;USER ID=USER_PROD";
Well, Lightswitch is using the new connection. But when i run the application, i am getting the error "ORA-00942: table or view does not exist". The views and tables definitely exist. The two schemas are the same. So what am i doing wrong?
Regards from MunichHI Munich,
Welcome to Lightswitch forum.
According to your description above, you want to connect to external datasource in Lightswitch application.
Oracle is not a supported data source for LightSwitch, it's recommended to use SQL Server database.
If you want to change the connection string, you can update the connection string for a data source using the data source wizard. For example in VS2013:
Please let me know if there is anything that I can do to help.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
On Calendar, I have tried to change the "Day starts at" and "Day ends at" many times however, it just does not seem to change. Please help.
This for Calendar on my Mac which of course effects my iPhone and iPad.
I don't need to see the hours from 1 am to 6 am
Please help!Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs. See if it is a fault in the hardware or just an iOS reinstall is the answer.
One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings. Then restore from the backup you just made. That has helped some with WiFi problems, may be it would work with your problems.
But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do. -
I tried to change the file type of the movie, but now I am unable to open/edit it in iMovie, HELP !
Thank you very much! This is exactly what I was looking for.
I appreciate your time and effort in solving my question : ) -
After trying to change permissions on my computer so others on my network can grab files, my external Hard Drive has a lock on it and I can't access files. I've tried repairing permissions, logging in under another Administrator account, using Terminal to fix the problem, downloaded BatChmod but nothing works… Any other suggestions? I have an Imac running OS10.6.8.
There is suddenly a lock icon on my external backup drive!
Custom Permissions
Maybe you are looking for
-
WiFi no longer working after software update
I have had my iPhone 3g for about 3 weeks. Everything worked fine at first. I was able to connect to my home wifi. After updating the iPhone software - I noticed I could no longer connect. The network shows up and I enter my password but I cannot joi
-
Initial time machine backup larger than actual computer harddrive
I've got an iMac with a 1TB harddrive and am trying to use a time machine set up to back up my harddrive. The external harddrive I'm using for my back up is also 1TB. I currently have about 135GB of free space on my iMac's harddrive and my external d
-
Adobe 11 std, Installation, serial number not valid.
Good afternoon, While finishing the installation of Adobe 11 standard, the serial number is requested. I input the one provided in the License certificate issued by the SW provider in our company.(hiding some digits for security reason ) but the prog
-
hi guys I'm facing a problem when opening the ai cc on my laptop and the problem is that the ai shuts down immediately while opening it for some informations : I use windows 8.1 , and my laptop requirements are good enough to open the ai cc and thx
-
IDoc....!!!
< MODERATOR: per the forum rules, please use an appropriate subject in your message. message locked. > Hi.. I have got an Idoc issue for which posting period is closed. But client dont want to change the PP. Instead he wants to post it in current