Help with PA30 transaction...
Hi,
I would like to to know how do we store various data for various communication types
in PA30 for a given personnel number.
For example, when I want to store email ID I use subtype as '0010' and save it but now I
also want to save the Syetm user id of the user for type '0001'. But when I save it using
type '0001' then the data with type '0010' gets overwritten and now the PA0001
stores data with user type '0001'.
I want the data to be stored both for Type '0001' and '0010'.
Thanks.
Regards,
Rajesh
Hi,
If you are sure, you selected the right subtype for storing data, then please select the overview icon from intial PA30 screen after selecting the infotpe 0105.
Else please use the navigation arrow key to scroll between records. As you have subtype 0001 & 0010, you get to see 0001 as the first record . Please select the navigation arrow and you will be able to see the second record for subtype 0010.
Reward if this was helpful.
Regards
Similar Messages
-
Modifying F4 help in PA30 Transaction Based on Company Code
Hi Experts,
I have an requirement in PA30 Transaction when infotype 15 is changed / displayed , it takes me to a screen where I need to restrict the F4 HELP for the field Reason for change based on employee company code.
Do I need to modify the standard program or some badi or user exit avaialable.Please advice.
Thanks in Advance.
Regards,
IFFHi
Better U do some USEREXIT.....For validation according to u requirement
Regards;
Prabu -
Issue with pa30 transaction for the infotype 15
Hi All,
I am creating additional payments for the infotype 15 in PA30 transaction.
i followed following steps: wage type
amount
date of origin
assignment number
then i clicked Maintain cost assignment button there i entered cost center 1027 . anybody can tell me where this cost center will save i need that table name.
thanks,
maheedharHi Soumya,
it is saving in ASSOB table that fine. but my question is how to get particular cost center for the personal number.
thanks,
maheedhar -
Using Personal Budget Template- help with Budget/Transactions
Hello,
I'm new to using Number and decided to tackle my budget. I've pretty much stuck with using the default template since I'm not too savvy at this yet. But, I've added a new Category under the Budget page, but it doesn't seem to be transferring to my Transaction page. Is there any way to add my created category to the drop down menu under transactions? I added the category "Gifts," but I can't seem to figure out how to get it to show up in the drop down menu in the Transaction worksheet.
Any help would be fantastic! Thank youHi Barry,
The new features in Pop-ups make it easy to edit and no, editing does not change the chosen values. If you forget to select all the Pop-ups and change one Pop-up cell, you can later select the rest of the column. Format Inspector offers to merge, and again it does not change chosen values.
Also, we can drag items to reorder the menu. Even better, create a Pop-up from data in selected cells (a long time on the wish-list in Numbers 2).
Already added to SG's GAINED thread
https://discussions.apple.com/thread/5473882?start=45&tstart=0
Regards,
Ian. -
Need help with Monthly Transaction By Hour Report
Post Author: cbcombs
CA Forum: General
Hello,Newbie needs to write a transaction report that is grouped by days of the week for a calendar month. It will have one column for each day of the week and each of those columns will contain a whole months of week day data. Then it will be grouped by each hour of the day. It will contain the number of transactions for each hour. And then a weekly average of the number of transactions for each hour of the day. The week starts on a Monday and goes through Sunday. They are probably going to want the dollar amount of the transactions too. Below is an example with the first two rows of data populated. Monthly Transaction Report For August 2007 Mon Tue Wed Thu Fri Sat Sun Average08:00 0 2 2 1 10 5 2 3.1409:00 25 3 5 4 5 8 6 4.43 10:00 5011:00 10012:00 15013:00 15013:00 12514:00 10015:00 5016:00 1017:00 2 Any help would be appreciated.Post Author: kbrinton
CA Forum: General
You could use the cross tab expert and set the columns to the day and the row to hours with it summing your transactions. So for the rows choose your date field and then choose Group options and have it set to "for each hour". Then the column choose your date field and have it set to "for each day". Then have it summarize your transactions.
Hope this helps!! -
Help with Report-Transaction P000_M10_NDT
Hello Experts,
I came across this transaction P000_M10_NDT..... looks like this is a standard SAP Delivered report.....
Can anyone please explain me how this report works? and what is its use? with examples?
All inputs are appreciated and rwrded.........
Thanks,Hi,
You can refer to Wikipedia help as follows:
http://en.wikipedia.org/wiki/401%28k%29
It is the part of legislation and makes sure that tax deferral of HCEs - highly compensated is not more than some percentage of the tax deferral of NHCEs non-highly compensated.
Regards
Edited by: Dilek Ersoz Adak on Mar 23, 2010 3:59 PM -
Our J2EE application makes heavy use of program-demarcated transactions. We
start the transaction and then perform a lot of data fetches, data updates,
and business logic followed by the eventual commit.
Sometimes these transactions exceed Weblogic's builtin 30 second time limit.
In some case we've boosted the timeout on the transaction to 5 mins, and
even that is close to the edge.
I suspect our design is flawed and that transactions should not be so
long-lived. I've never worked on a system that worked this way. Can anyone
provide advice or best-practices for this scenario?
One example of a long transaction is in a piece of code that generates a
file containing invoices. After the file is created we need to update the
database records that contributed to the file so a transaction is started
and then 1000's of records are updated. In this case we tried to minimize
the transaction duration by only doing the data updates inside the xaction
(it used to doo all the business logic in there too) but even so it is
possible to exceed the 30s timeout due to the size of the data.
[email protected]
Couldn't you just use the BubbleEvent=false if the thing you do in beforaction goes bad. then SBO don't do its own functionality ... I think your broblem is that beforeaction = true and beforeaction= false are two events and to my knowlegde the transaction can't work in two different events (Need a commit or rollback in the beforeaction=true event).
-
Help with Transaction PTMW_PROF
Hi everybody.
I need some help with PTMW_PROF transaction.
My situation is the following: I'm working with this standard program, and i have to make some checks on the input data, like we always do with standard infotypes via PA30.
But the problem is that i can't find any BADIs associated with this standard program.
I've also found this user-exit: PTIMTMW, nevertheless, looks like it's not useful for my purposes.
Any ideas?
Thanks in advance.Hello.
I've found: BADI PL_BT_USER, and this BADI has a method called PROCESS_DATA with the following paramters:
FLT_VAL Type TIM_BLPTPOINT_EX
I_RECORD Type Ref To IF_PT_TD_CONTROL
I_TIME_DATA Type TIM_BLP_REQUEST_TAB
E_MESSAGES Type BAPIRET2_T
E_TIME_DATA Type TIM_BLP_REQUEST_TAB
Looks like I_RECORD has the data i need to check out, but when access it in debuggin mode i cant find any useful values, It's got the following value: 313 <CL_PT_TD_CONTROL>
How can i get the values i need with this parameter?????
Thanks in advance. -
How to validated screen field(Age) at PA30 transaction
Hi SAP Technical Guru,
i'm working with PA30 transaction, i have to validate the sceen field i.e. Birth Date.it should not consider less than 18 years,
eg:the person who has <18 yrs it should raise a message like min age invalid for employement
so pleHi SAP Techinical Guru,
please see code below, which i written to raise a message for filed date of birth,when the entere date if lessthan the 18 yrs it should raise message,
data: dyears like P0347-SCRYY,
ddays TYPE i,
fromdate TYPE d,
todate TYPE d,
temp TYPE string.
CASE innnn-infty.
WHEN '0002'.
IF sy-tcode = 'PA30'.
todate = sy-datum.
temp = innnn-data3.
CONDENSE temp NO-GAPS.
fromdate = temp.
CALL FUNCTION 'HR_HK_DIFF_BT_2_DATES'
EXPORTING
date1 = todate
date2 = fromdate
output_format = '01'
IMPORTING
years = dyears
EXCEPTIONS
invalid_dates_specified = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
IF dyears < 18.
MESSAGE ID sy-msgid TYPE 'E' NUMBER sy-msgno
WITH 'EMPLOYEE AGE IS LESS THAN 18 YEARS'.
RAISE error_occured.
ENDIF.
please give where iam getting wrong.
regards, -
Help with HR Hire Transaction PA40
When I start a HR WorkFlow to hire a Person With the transaction PA40. When I save the second Info-type, "Create Organizatinal Assignment", the system require a new login.
Reading the code I viewed that the function HR_EVENT_CREATE.
call function 'SWE_EVENT_CREATE' Row 496 Function trigger_event - HR_EVENT_CREATE
call method l_event->raise. Row 126 SWE_EVENT_CREATE
call method l_event_manager->raise_event( me ). Row 25 Raise IF_SWF_EVT_EVENT
call method l_handler->process. " Row 170 CL_SWF_EVT_EVENT_MANAGER-RAISE_EVENT
call method l_strategy->process( me ). " Row 24 CL_SWF_EVT_EVENT_HANDLER-Process
Do you have any suggestion?
thankshi Duxton,
Thanks for the respond, but the record i already have it, but the number is automatic design and i don't know how obtein it that is the problem??????? because the user doesn't have the id object, he/she only wanna know the id object that was created...... -
Hi,
I have created a record for Infotype 14 for a Pernr thru PA30 Transaction for Wage Type 1140. I entered the data on the next screen and saved the data.
One recoed was created in Infotype 0014, but the amount(BETRG) field is blank.
When I go to PA20/PA30 Transaction and view the Pernr-Infotype-Subty, I can see the value there, but in PA0014, though the record is being created, but the value is missing.
I asked the Functional Consultant and he told me that this value is not stored in Infotype 14 because this wage type is for Indirect Evaluation. There are some rules based on which the amount is calculated.
Can you help me how to get the values, does anyone know in which table these values will be stored?
Thanks and Regards,
Ishaq.Hi Ishaq Ali Khan,
The affect of the wage type can be because of different infotypes. If U intend to check all of them it amy take lot of time. U can go to data element 'LGART' and select the where used list (Tablke fields). Here u can refine ur search by choosing only the tables starting with PA* -
GL A/C with Detailed Transactions
I have prepare a report which showing the GL A/C with Detailed Transactions.
I need the link about GL tables with PO, AP and AR tables
can anybody help me in this regard
thanks in advance
sadiqPlease Refer to table
gl_import_references
link this table with gl_je_headers and gl_je_lines using je_header_id and line_id
gl_import_references can be linked with subledger tables using gl_sl_link_id
the Link table in Subledger can be identified from gl_sl_link_table
Ex: gl_import_references shall be linked to ap_ae_lines table using gl_sl_link_id
I hope it is helpful
Regards,
Sridhar -
Need Help With File Matching Records
I need help with my file matching program.
Here is how it suppose to work: FileMatch class should contain methods to read oldmast.txt and trans.txt. When a match occurs (i.e., records with the same account number appear in both the master file and the transaction file), add the dollar amount in the transaction record to the current balance in the master record, and write the "newmast.txt" record. (Assume that purchases are indicated by positive amounts in the transaction file and payments by negative amounts.)
When there is a master record for a particular account, but no corresponding transaction record, merely write the master record to "newmast.txt". When there is a transaction record, but no corresponding master record, print to a log file the message "Unmatched transaction record for account number ..." (fill in the account number from the transaction record). The log file should be a text file named "log.txt".
Here is my following program code:
// Exercise 14.8: CreateTextFile.java
// creates a text file
import java.io.FileNotFoundException;
import java.lang.SecurityException;
import java.util.Formatter;
import java.util.FormatterClosedException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class CreateTextFile
private Formatter output1; // object used to output text to file
private Formatter output2; // object used to output text to file
// enable user to open file
public void openTransFile()
try
output1 = new Formatter("trans.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
output2 = new Formatter("oldmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openOldMastFile
// add transaction records to file
public void addTransactionRecords()
// object to be written to file
TransactionRecord record1 = new TransactionRecord();
Scanner input1 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0) and amount.","? ");
while (input1.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record1.setAccount(input1.nextInt()); // read account number
record1.setAmount(input1.nextDouble()); // read amount
if (record1.getAccount() > 0)
// write new record
output1.format("%d %.2f\n", record1.getAccount(), record1.getAmount());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input1.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0) ",
"and amount.","? ");
} // end while
} // end method addTransactionRecords
// add account records to file
public void addAccountRecords()
// object to be written to file
AccountRecord record2 = new AccountRecord();
Scanner input2 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0), first name, last name and balance.","? ");
while (input2.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record2.setAccount(input2.nextInt()); // read account number
record2.setFirstName(input2.next()); // read first name
record2.setLastName(input2.next()); // read last name
record2.setBalance(input2.nextDouble()); // read balance
if (record2.getAccount() > 0)
// write new record
output2.format("%d %s %s %.2f\n", record2.getAccount(), record2.getFirstName(),
record2.getLastName(), record2.getBalance());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input2.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0),",
"first name, last name and balance.","? ");
} // end while
} // end method addAccountRecords
// close file
public void closeTransFile()
if (output1 != null)
output1.close();
} // end method closeTransFile
// close file
public void closeOldMastFile()
if (output2 != null)
output2.close();
} // end method closeOldMastFile
} // end class CreateTextFile--------------------------------------------------------------------------------------------------
// Exercise 14.8: CreateTextFileTest.java
// Testing class CreateTextFile
public class CreateTextFileTest
// main method begins program execution
public static void main( String args[] )
CreateTextFile application = new CreateTextFile();
application.openTransFile();
application.addTransactionRecords();
application.closeTransFile();
application.openOldMastFile();
application.addAccountRecords();
application.closeOldMastFile();
} // end main
} // end class CreateTextFileTest-------------------------------------------------------------------------------------------------
// Exercise 14.8: TransactionRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
public class TransactionRecord
private int account;
private double amount;
// no-argument constructor calls other constructor with default values
public TransactionRecord()
this(0,0.0); // call two-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public TransactionRecord(int acct, double amt)
setAccount(acct);
setAmount(amt);
} // end two-argument TransactionRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set amount
public void setAmount(double amt)
amount = amt;
} // end method setAmount
// get amount
public double getAmount()
return amount;
} // end method getAmount
} // end class TransactionRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: AccountRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
import org.egan.TransactionRecord;
public class AccountRecord
private int account;
private String firstName;
private String lastName;
private double balance;
// no-argument constructor calls other constructor with default values
public AccountRecord()
this(0,"","",0.0); // call four-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public AccountRecord(int acct, String first, String last, double bal)
setAccount(acct);
setFirstName(first);
setLastName(last);
setBalance(bal);
} // end four-argument AccountRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set first name
public void setFirstName(String first)
firstName = first;
} // end method setFirstName
// get first name
public String getFirstName()
return firstName;
} // end method getFirstName
// set last name
public void setLastName(String last)
lastName = last;
} // end method setLastName
// get last name
public String getLastName()
return lastName;
} // end method getLastName
// set balance
public void setBalance(double bal)
balance = bal;
} // end method setBalance
// get balance
public double getBalance()
return balance;
} // end method getBalance
// combine balance and amount
public void combine(TransactionRecord record)
balance = (getBalance() + record.getAmount());
} // end method combine
} // end class AccountRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatch.java
import java.io.File;
import java.io.FileNotFoundException;
import java.lang.IllegalStateException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import java.util.Formatter;
import java.util.FormatterClosedException;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class FileMatch
private Scanner inTransaction;
private Scanner inOldMaster;
private Formatter outNewMaster;
private Formatter theLog;
// enable user to open file
public void openTransFile()
try
inTransaction = new Scanner(new File("trans.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
inOldMaster = new Scanner(new File("oldmast.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openOldMastFile
// enable user to open file
public void openNewMastFile()
try
outNewMaster = new Formatter("newmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openNewMastFile
// enable user to open file
public void openLogFile()
try
theLog = new Formatter("log.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openLogFile
// update records
public void updateRecords()
TransactionRecord transaction = new TransactionRecord();
AccountRecord account = new AccountRecord();
try // read records from file using Scanner object
System.out.println("Start file matching.");
while (inTransaction.hasNext() && inOldMaster.hasNext())
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
account.setAccount(inOldMaster.nextInt()); // read account number
account.setFirstName(inOldMaster.next()); // read first name
account.setLastName(inOldMaster.next()); // read last name
account.setBalance(inOldMaster.nextDouble()); // read balance
if (transaction.getAccount() == account.getAccount())
while (inTransaction.hasNext() && transaction.getAccount() == account.getAccount())
account.combine(transaction);
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
else if (transaction.getAccount() != account.getAccount())
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
theLog.format("%s%d","Unmatched transaction record for account number ",transaction.getAccount());
} // end while
System.out.println("Finish file matching.");
} // end try
catch (NoSuchElementException elementException)
System.err.println("File improperly formed.");
inTransaction.close();
inOldMaster.close();
System.exit(1);
} // end catch
catch (IllegalStateException stateException)
System.err.println("Error reading from file.");
System.exit(1);
} // end catch
} // end method updateRecords
// close file and terminate application
public void closeTransFile()
if (inTransaction != null)
inTransaction.close();
} // end method closeTransFile
// close file and terminate application
public void closeOldMastFile()
if (inOldMaster != null)
inOldMaster.close();
} // end method closeOldMastFile
// close file
public void closeNewMastFile()
if (outNewMaster != null)
outNewMaster.close();
} // end method closeNewMastFile
// close file
public void closeLogFile()
if (theLog != null)
theLog.close();
} // end method closeLogFile
} // end class FileMatch-------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatchTest.java
// Testing class FileMatch
public class FileMatchTest
// main method begins program execution
public static void main( String args[] )
FileMatch application = new FileMatch();
application.openTransFile();
application.openOldMastFile();
application.openNewMastFile();
application.openLogFile();
application.updateRecords();
application.closeLogFile();
application.closeNewMastFile();
application.closeOldMastFile();
application.closeTransFile();
} // end main
} // end class FileMatchTest-------------------------------------------------------------------------------------------------
Sample data for master file:
Master file
Account Number Name Balance
100 Alan Jones 348.17
300 Mary Smith 27.19
500 Sam Sharp 0.00
700 Suzy Green -14.22Sample data for transaction file:
Transaction file Transaction
Account Number Amount
100 27.14
300 62.11
300 83.89
400 100.56
700 80.78
700 1.53
900 82.17 -------------------------------------------------------------------------------------------------
My FileMatch class program above has bugs in it.
The correct results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 173.19
500 Sam Sharp 0.00
700 Suzy Green 68.09The correct results for the log.txt:
Unmatched transaction record for account number 400Unmatched transaction record for account number 900------------------------------------------------------------------------------------------------
My results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 111.08
500 Sam Sharp 0.00
700 Suzy Green -12.69My results for the log.txt
Unmatched transaction record for account number 700-------------------------------------------------------------------------------------------------
I am not sure what is wrong with my code above to make my results different from the correct results.
Much help is appreciated. Please help.From the output, it looks like one problem is just formatting -- apparently you're including a newline in log entries and not using tabs for the newmast output file.
As to why the numbers are off -- just from glancing over it, it appears that the problem is when you add multiple transaction values. Since account.combine() is so simple, I suspect that you're either adding creating transaction objects incorrectly or not creating them when you should be.
Create test input data that isolates a single case of this (e.g., just the Mary Smith case), and then running your program in a debugger or adding debugging code to the add/combine method, so you can see what's happening in detail.
Also I'd recommend reconsidering your design. It's a red flag if a class has a name with "Create" in it. Classes represent bundles of independant state and transformations on that state, not things to do. -
New iMac extremely slow following migration (Help with Etre Check diagnosis)
Hi gurus,
New iMac - scheduled for genius bar on Friday but trying to avoid the trip. Migrated everything over from 2009 macbook pro to 2011 macbook and now 2013 iMac. I imagine there is a lot of cruft from the repeated migrations and am close to just wiping and migrating from scratch. I don't know, however, how to get my old mail and other critical settings over.
Problem is clearly in the user account. I created a separate admin account and that runs relatively fine. Is the below user account salvageable? Should I delete all my old permissions? Any tips would be appreciated. Thanks for the Etrecheck program,
Problem description:
Application hangs and system unresponsive in migrated user account
EtreCheck version: 2.1.8 (121)
Report generated February 16, 2015 at 4:48:06 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (21.5-inch, Late 2013) (Technical Specifications)
iMac - model: iMac14,1
1 2.7 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel Iris Pro
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 4:51:57
Disk Information: ℹ️
APPLE HDD HTS541010A9E662 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (585.74 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
TOSHIBA External USB 3.0 2 TB
EFI (disk3s1) <not mounted> : 210 MB
Time Capsule (disk3s2) <not mounted> : 2.00 TB
Western Digital My Book 1130 2 TB
EFI (disk1s1) <not mounted> : 210 MB
ACbook (disk1s2) <not mounted> : 2.00 TB
Centon DataStick 30.93 GB
EFI (disk2s1) <not mounted> : 210 MB
Install OS X Yosemite (disk2s2) /Volumes/Install OS X Yosemite : 30.59 GB (25.27 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.Cycling74.driver.Soundflower (1.4.2) [Click for support]
[not loaded] com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) [Click for support]
[not loaded] com.logmein.hamachi (1.0) [Click for support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) [Click for support]
[not loaded] com.wdc.driver.1394HP (1.0.7) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.7) [Click for support]
[loaded] net.telestream.driver.TelestreamAudio (1.1.0 - SDK 10.8) [Click for support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [Click for support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [Click for support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.accountsd.plist
[killed] com.apple.AirPlayUIAgent.plist
[killed] com.apple.bird.plist
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudd.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.coreservices.uiagent.plist
[killed] com.apple.iconservices.iconservicesagent.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.pluginkit.pkd.plist
[killed] com.apple.recentsd.plist
[killed] com.apple.SafariNotificationAgent.plist
[killed] com.apple.sbd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.secd.plist
[killed] com.apple.secinitd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.spindump_agent.plist
[killed] com.apple.tccd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
23 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.awdd.plist
[killed] com.apple.coresymbolicationd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.diagnosticd.plist
[killed] com.apple.GSSCred.plist
[killed] com.apple.iconservices.iconservicesagent.plist
[killed] com.apple.iconservices.iconservicesd.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.MobileFileIntegrity.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.sandboxd.plist
[killed] com.apple.secinitd.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.spindump.plist
[killed] com.apple.sysmond.plist
[killed] com.apple.systemstatsd.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
[killed] org.cups.cupsd.plist
22 processes killed due to memory pressure
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
[not loaded] com.maintain.LogOut.plist [Click for support]
[not loaded] com.maintain.Restart.plist [Click for support]
[not loaded] com.maintain.ShutDown.plist [Click for support]
[not loaded] com.maintain.Sleep.plist [Click for support]
[running] com.maintain.SystemEvents.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.seagate.SeagateStorageGauge.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.bombich.ccchelper.plist [Click for support]
[running] com.crashplan.engine.plist [Click for support]
[running] com.eltima.ElmediaPlayer.daemon.plist [Click for support]
[failed] com.google.GoogleML.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.rogueamoeba.hermes.plist [Click for support]
[failed] com.vmware.launchd.vmware.plist [Click for support]
[running] com.zqueue.servetome-server.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] net.sourceforge.MonolingualHelper.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
[running] .dat0598.40e (hidden) [Click for support]
/usr/bin/osascript /usr/bin/osascript osascript -e tell application "Folder Actions Dispatcher" to tick
[unknown] .datdf56.40b (hidden) [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.amazon.cloud-player.plist [Click for support]
[running] com.amazon.music.plist [Click for support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Click for support]
[running] com.mlbam.nexdef.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Canon IJ Network Scanner Selector2 UNKNOWN (missing value)
Dropbox Application (/Applications/Dropbox.app)
ACbook UNKNOWN (missing value)
CrashPlan menu bar UNKNOWN (missing value)
CrashPlan menu bar Application (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)
Canon IJ Network Scanner Selector EX Application (/Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app)
Caffeine UNKNOWN (missing value)
Internet Plug-ins: ℹ️
EPPEX Plugin: Version: 10.0 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
SlingPlayer: Version: Unknown - SDK 10.8 [Click for support]
AdobePDFViewer: Version: 9.5.5 [Click for support]
Leap Web Player: Version: LeapPlayer version 2.0.2f2 [Click for support]
Unity Web Player: Version: UnityPlayer version 3.5.5f4 - SDK 10.6 [Click for support]
nppanda3d: Version: Unknown [Click for support]
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
RealPlayer Plugin: Version: Unknown [Click for support]
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
DivXBrowserPlugin: Version: 1.4 [Click for support]
Silverlight: Version: 4.0.60129.0 [Click for support]
CoolirisWebKitPlugin: Version: Unknown [Click for support]
Google Earth Web Plug-in: Version: 6.0 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Easy-WebPrint EX: Version: 1.0.0 [Click for support]
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 [Click for support]
ContentUploaderPlugin: Version: 1.2 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
Picasa: Version: 1.0 [Click for support]
3rd Party Preference Panes: ℹ️
RCDefaultApp
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Java [Click for support]
Perian [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 413.60 GB
Destinations:
Untitled [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 413.60 GB X 3)
Top Processes by CPU: ℹ️
11% BitdefenderVirusScanner
7% WindowServer
1% loginwindow
0% SystemUIServer
0% dpd
Top Processes by Memory: ℹ️
94 MB BitdefenderVirusScanner
60 MB Finder
34 MB mds_stores
26 MB CrashPlanService
26 MB WindowServer
Virtual Memory Information: ℹ️
34 MB Free RAM
1.24 GB Active RAM
1.23 GB Inactive RAM
1.81 GB Wired RAM
37.21 GB Page-ins
1.05 GB Page-outs
Diagnostics Information: ℹ️
Feb 16, 2015, 04:30:47 PM /Users/[redacted]/Library/Logs/DiagnosticReports/BitdefenderVirusScanner_2015-0 2-16-163047_[redacted].crash
Feb 16, 2015, 02:41:32 PM /Library/Logs/DiagnosticReports/firefox_2015-02-16-144132_[redacted].hang
Feb 16, 2015, 02:40:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-16-144005_[reda cted].crash
Feb 16, 2015, 01:21:20 PM /Users/[redacted]/Library/Logs/DiagnosticReports/BitdefenderVirusScanner_2015-0 2-16-132120_[redacted].crash
Feb 16, 2015, 11:56:57 AM /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-115657_[redacted].cpu_resource.diag [Click for details]
Feb 16, 2015, 11:50:54 AM /Library/Logs/DiagnosticReports/com.zqueue.servetome-server_2015-02-16-115054_[ redacted].crash
Feb 16, 2015, 11:49:07 AM Self test - passed
Feb 16, 2015, 09:55:04 AM /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-095504_[redacted].cpu_resource.diag [Click for details]
Feb 16, 2015, 09:44:52 AM /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-094452_[redacted].cpu_resource.diag [Click for details]
Feb 15, 2015, 03:02:01 PM /Library/Logs/DiagnosticReports/ClamXav_2015-02-15-150201_[redacted].hang
Feb 15, 2015, 02:58:45 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-15-145845_[reda cted].crash
Feb 15, 2015, 12:35:39 AM /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-15-003539_[redacted].cpu_resource.diag [Click for details]
Feb 15, 2015, 12:19:21 AM /Library/Logs/DiagnosticReports/CrashPlanService_2015-02-15-001921_[redacted].c pu_resource.diag [Click for details]
Feb 14, 2015, 11:45:36 PM /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-234536_[redacted].cpu_resource.diag [Click for details]
Feb 14, 2015, 07:00:58 PM /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-190058_[redacted].cpu_resource.diag [Click for details]
Feb 14, 2015, 03:54:47 PM /Users/[redacted]/Library/Logs/DiagnosticReports/ClamXav_2015-02-14-155447_[red acted].crash
Feb 14, 2015, 03:18:24 PM /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-151824_[redacted].cpu_resource.diag [Click for details]Everything is included below. Shortly before I ran the script I disabled folder actions which appeared to have a bunch of redundant and scripts that were taking close to 6-7 gigs of ram, It'll be interesting to review the below. Thanks Mr. Davis, you are a major resource,
Start time: 09:12:51 02/17/15
Revision: 1241
Model Identifier: iMac14,1
System Version: OS X 10.10.2 (14C109)
Kernel Version: Darwin 14.1.0
Time since boot: 7:55
UID: 501
USB
My Book 1130 (Western Digital Technologies, Inc.)
External USB 3.0 (Toshiba America Info. Systems, Inc.)
DataStick (Alcor Micro, Corp.)
Bluetooth
Apple Magic Mouse
Apple Wireless Keyboard
Activity
CPU: user 18%, system 19%
CPU usage (%)
mds (UID 0): 19.5
I/O wait time (ms/s)
mds (UID 0): 1156
mdworker (UID 89): 186
I/O requests (KiB/s)
mds (UID 0): 4892
System errors (per sec)
mdworker (UID 89, error 2): 158
mds (UID 0, error 2): 149
mds (UID 0, error 20): 116
Trusted certs (user)
63.197.157.203
Firewall: On
Listeners
kdc: kerberos
launchd: afpovertcp
launchd: microsoft-ds
launchd: printer
launchd: ssh
System caches/logs
1166 MB: /Library/Caches/CrashPlan/42/cpfmf
Diagnostic reports
2015-02-14 ClamXav crash
2015-02-15 ClamXav hang
2015-02-15 garcon crash
2015-02-16 BitdefenderVirusScanner crash x2
2015-02-16 Kernel gpuRestart
2015-02-16 com.zqueue.servetome-server crash
2015-02-16 firefox hang
2015-02-16 garcon crash
I/O errors
disk3s2: data underrun 1
disk1s2: do_jnl_io: strategy err 0x6 2
Volumes
disk0s2: /
disk1s2: /Volumes/Install
disk3s2: /Volumes/ACbook
disk2s2: /Volumes/Time
Kernel log
Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on Console(2347)
Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on iTunes(2727)
Feb 15 09:48:43 IOAudioStream[0xffffff802f3abc00]::clipIfNecessary() - Error: counted 1 clip more than one buffer ahead errors.
Feb 15 14:53:10 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
Feb 15 14:56:36 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
Feb 16 09:39:13 utun_start: ifnet_disable_output returned error 12
Feb 16 10:07:25 Trying restart GPU ...
Feb 16 11:43:50 jnl: disk1s2: write_journal_header: error writing the journal header!
Feb 16 11:43:51 jnl: disk1s2: close: journal 0xffffff802b4daa80, is invalid. aborting outstanding transactions
Feb 16 11:51:14 utun_start: ifnet_disable_output returned error 12
Feb 16 11:57:11 jnl: disk1s2: write_journal_header: error writing the journal header!
Feb 16 11:57:11 jnl: disk1s2: close: journal 0xffffff8025c1cc20, is invalid. aborting outstanding transactions
Feb 16 14:22:43 Limiting closed port RST response from 423 to 250 packets per second
Feb 16 14:24:06 Limiting closed port RST response from 264 to 250 packets per second
Feb 16 14:24:28 Limiting closed port RST response from 324 to 250 packets per second
Feb 16 14:24:42 Limiting closed port RST response from 251 to 250 packets per second
Feb 17 01:18:41 Sleep failure code 0x00000088 0x14006700
Feb 17 01:18:41 System was rebooted due to Sleep/Wake failure
Feb 17 01:18:41 Failed to open swap file 30
Feb 17 01:18:41 vm_swap_create_file failed @ 19 secs
Feb 17 01:18:41 USBF: 20.861 AppleUSBHubPort::FatalError - Port 1 of Hub at 0x14800000 reported error 0xe00002ed while doing getting port status (4)
Feb 17 01:18:41 USBF: 20.861 AppleUSBHubPort::FatalError - Port 1 of Hub at 0x14800000 reported error 0xe00002c0 while doing clearing port feature (2)
Feb 17 01:19:29 utun_start: ifnet_disable_output returned error 12
Feb 17 08:10:16 [IOBluetoothHCIController][handleACLPacketTimeout] -- Disconnecting due to device not responding (ACL Packet timed out) for connection handle 0x40
System log
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:09:31 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
Feb 17 09:09:31 WindowServer WSGetSurfaceInWindow : Invalid surface 687364876 for window 227
Feb 17 09:09:37 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
Feb 17 09:09:38 WindowServer WSGetSurfaceInWindow : Invalid surface 1046946449 for window 227
Console log
Feb 17 07:47:09 nsurlstoraged The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 17 07:47:09 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 17 07:47:09 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 17 07:47:53 nsurlstoraged The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 17 07:54:18 ReportCrash Invoking spindump for pid=9255 wakeups_rate=757 duration=60 because of excessive wakeups
Feb 17 07:54:59 ReportCrash Invoking spindump for pid=9269 wakeups_rate=1144 duration=40 because of excessive wakeups
Feb 17 08:09:53 ReportCrash Invoking spindump for pid=417 wakeups_rate=252 duration=179 because of excessive wakeups
Feb 17 08:15:34 ReportCrash Invoking spindump for pid=9290 wakeups_rate=203 duration=222 because of excessive wakeups
Feb 17 08:18:12 ReportCrash Invoking spindump for pid=6328 wakeups_rate=185 duration=244 because of excessive wakeups
Feb 17 08:28:18 ReportCrash Invoking spindump for pid=9314 wakeups_rate=3955 duration=12 because of excessive wakeups
Feb 17 08:32:28 ReportCrash Invoking spindump for pid=9321 wakeups_rate=609 duration=74 because of excessive wakeups
Feb 17 08:36:08 ReportCrash Invoking spindump for pid=9331 wakeups_rate=573 duration=79 because of excessive wakeups
Feb 17 08:38:36 ReportCrash Invoking spindump for pid=9348 wakeups_rate=1503 duration=30 because of excessive wakeups
Feb 17 08:41:49 ReportCrash Invoking spindump for pid=9378 wakeups_rate=725 duration=63 because of excessive wakeups
Feb 17 08:45:39 ReportCrash Invoking spindump for pid=9390 wakeups_rate=398 duration=114 because of excessive wakeups
Feb 17 08:49:04 ReportCrash Invoking spindump for pid=9420 thread=174222 percent_cpu=63 duration=143 because of excessive cpu utilization
Feb 17 08:50:57 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
Feb 17 08:51:18 mdworker Error loading /Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImpo rter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter: dlopen(/Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotli ghtImporter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter, 262): Library not loaded: @rpath/MAFiles.framework/Versions/A/MAFiles
Referenced from: /Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImpo rter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter
Reason: image not found
Feb 17 08:51:18 mdworker Cannot find function pointer MetadataImporterPluginFactory for factory UUID in CFBundle/CFPlugIn 0x7f8b9870c650 </Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImp orter.mdimporter> (bundle, not loaded)
Feb 17 09:10:19 nsurlstoraged ERROR: unable to get the receiver data from the DB!
Loaded kernel extensions
net.telestream.driver.TelestreamAudio (1.1.0)
Daemons
com.adobe.fpsaud
com.apple.AccountPolicyHelper
com.apple.CodeSigningHelper
com.apple.Kerberos.kdc
- status: 1
com.apple.MobileFileIntegrity
com.apple.aelwriter
com.apple.awdd
com.apple.cache_delete
com.apple.cfprefsd.xpc.daemon
com.apple.coreduetd
com.apple.coresymbolicationd
com.apple.ctkd
com.apple.diagnosticd
com.apple.dpd
- status: 75
com.apple.icloud.findmydeviced
com.apple.iconservices.iconservicesagent
com.apple.iconservices.iconservicesd
com.apple.ifdreader
com.apple.nehelper
com.apple.networkd_privileged
com.apple.nsurlsessiond_privileged
com.apple.nsurlstoraged
com.apple.periodic-daily
com.apple.periodic-weekly
com.apple.sandboxd
com.apple.secinitd
com.apple.softwareupdate_download_service
com.apple.softwareupdated
com.apple.spindump
com.apple.sysmond
com.apple.systemstatsd
com.apple.tccd.system
com.apple.watchdogd
com.apple.wdhelper
com.bombich.ccchelper
com.eltima.ElmediaPlayer.daemon
com.google.GoogleML
- status: 1
com.google.keystone.daemon
com.microsoft.office.licensing.helper
com.oracle.java.Helper-Tool
com.rogueamoeba.hermes
com.vmware.launchd.vmware
- status: 78
com.zqueue.servetome-server
jp.co.canon.MasterInstaller
net.sourceforge.MonolingualHelper
org.cups.cupsd
org.macosforge.xquartz.privileged_startx
Agents
com.adobe.ARM.UUID
com.amazon.cloud-player
- status: 78
com.amazon.music
com.apple.Safari
com.apple.photostream-agent
com.google.keystone.system.agent
com.maintain.SystemEvents
com.microsoft.SyncServicesAgent
com.mlbam.nexdef
com.oracle.java.Java-Updater
com.seagate.SeagateStorageGauge.plist
org.macosforge.xquartz.startx
User overrides
com.apple.imagent.monaco
com.apple.FTMonitor
com.apple.apsd-ft
User login items
iTunesHelper
- /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
Canon IJ Network Scanner Selector2
- missing value
Dropbox
- /Applications/Dropbox.app
ACbook
- /Volumes/ACbook
CrashPlan menu bar
- missing value
CrashPlan menu bar
- /Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app
Canon IJ Network Scanner Selector EX
- /Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app
Caffeine
- missing value
Firefox extensions
Mozilla Firefox hotfix
Hide My ***! Web Proxy
FoxyProxy Standard
Jesper Staun Hansen
Torrent Tornado
Torrent Finder Toolbar
Widgets
iStat nano
iCloud errors
bird 405
cloudd 68
CallHistorySyncHelper 6
Safari 4
accountsd 2
Continuity errors
lsuseractivityd 8
Safari 2
Restricted files: 43
Lockfiles: 22
Accessibility
Keyboard Zoom: On
Scroll Zoom: On
Contents of /Library/LaunchAgents/com.maintain.LogOut.plist
- mod date: Feb 9 20:01:50 2015
- checksum: 2486542021
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.maintain.LogOut</string>
<key>ProgramArguments</key>
<array>
<string>/usr/bin/osascript</string>
<string>-e</string>
<string>delay 3</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>do shell script "killall Cocktail"</string>
<string>-e</string>
<string>end try</string>
<string>-e</string>
<string>ignoring application responses</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>tell application "System Events" to log out</string>
...and 7 more line(s)
Contents of /Library/LaunchAgents/com.maintain.Restart.plist
- mod date: Feb 9 19:55:16 2015
- checksum: 1856196442
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.maintain.Restart</string>
<key>ProgramArguments</key>
<array>
<string>/usr/bin/osascript</string>
<string>-e</string>
<string>delay 3</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>do shell script "killall Cocktail"</string>
<string>-e</string>
<string>end try</string>
<string>-e</string>
<string>ignoring application responses</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>tell application "System Events" to restart</string>
...and 7 more line(s)
Contents of /Library/LaunchAgents/com.maintain.ShutDown.plist
- mod date: Feb 9 19:55:17 2015
- checksum: 2131448796
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.maintain.ShutDown</string>
<key>ProgramArguments</key>
<array>
<string>/usr/bin/osascript</string>
<string>-e</string>
<string>delay 3</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>do shell script "killall Cocktail"</string>
<string>-e</string>
<string>end try</string>
<string>-e</string>
<string>ignoring application responses</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>tell application "System Events" to shut down</string>
...and 7 more line(s)
Contents of /Library/LaunchAgents/com.maintain.Sleep.plist
- mod date: Feb 9 20:01:53 2015
- checksum: 2684026111
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.maintain.Sleep</string>
<key>ProgramArguments</key>
<array>
<string>/usr/bin/osascript</string>
<string>-e</string>
<string>delay 3</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>do shell script "killall Cocktail"</string>
<string>-e</string>
<string>end try</string>
<string>-e</string>
<string>ignoring application responses</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>tell application "System Events" to sleep</string>
...and 7 more line(s)
Contents of /Library/LaunchAgents/com.maintain.SystemEvents.plist
- mod date: Feb 9 19:55:17 2015
- checksum: 1297325733
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.maintain.SystemEvents</string>
<key>ProgramArguments</key>
<array>
<string>/System/Library/CoreServices/System Events.app/Contents/MacOS/System Events</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
- mod date: Feb 6 15:45:52 2015
- checksum: 655956191
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>17</integer>
<key>Minute</key>
<integer>49</integer>
<key>Weekday</key>
<integer>1</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.seagate.SeagateStorageGauge.plist
- mod date: Mar 10 08:38:47 2010
- checksum: 3262128215
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<!--
com.seagate.SeagateStorageGauge.plist
SeagateDiagnostics
Created by John Brisbin on 3/10/10.
Copyright 2010 Seagate Technologies LLC.. All rights reserved.
-->
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.seagate.SeagateStorageGauge.plist</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Seagate/Seagate Storage Gauge.app/Contents/MacOS/Seagate Storage Gauge</string>
<string>-doautolnch</string>
<string>/Library/Application Support/Seagate/Seagate Storage Gauge.app</string>
</array>
<key>RunAtLoad</key>
...and 3 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist
- mod date: Feb 6 13:35:20 2015
- checksum: 495358405
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.bombich.ccchelper</string>
<key>MachServices</key>
<dict>
<key>com.bombich.ccchelper</key>
<true/>
</dict>
<key>Program</key>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.crashplan.engine.plist
- mod date: Jan 10 11:46:36 2015
- checksum: 757054163
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.crashplan.engine</string>
<key>UserName</key>
<string>root</string>
<key>GroupName</key>
<string>wheel</string>
<key>Nice</key>
<integer>20</integer>
<key>KeepAlive</key>
<true/>
<key>OnDemand</key>
<false/>
<key>RunAtLoad</key>
<true/>
<key>AbandonProcessGroup</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/CrashPlan.app/Contents/Resources/Java</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/CrashPlan.app/Contents/MacOS/CrashPlanService</string>
...and 26 more line(s)
Contents of /Library/LaunchDaemons/com.eltima.ElmediaPlayer.daemon.plist
- mod date: Oct 9 06:40:45 2012
- checksum: 1274124936
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.eltima.ElmediaPlayer.daemon</string>
<key>LaunchOnlyOnce</key>
<true/>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/ElmediaPlayer/empdaemon</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.google.GoogleML.plist
- mod date: Mar 10 10:19:30 2008
- checksum: 315725308
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.GoogleML</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Google/GoogleML/GoogleML.bundle/Contents/MacOS/googleml-modwat ch</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>UserName</key>
<string>root</string>
<key>WatchPaths</key>
<array>
<string>/Library/Google/GoogleML/Modules</string>
<string>/Library/Google/GoogleML</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.rogueamoeba.hermes.plist
- mod date: Jul 15 21:05:58 2008
- checksum: 1539233627
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>GroupName</key>
<string>wheel</string>
<key>Label</key>
<string>com.rogueamoeba.hermes</string>
<key>ProgramArguments</key>
<array>
<string>/usr/local/hermes/bin/hermesctl</string>
<string>update</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceIPC</key>
<true/>
<key>UserName</key>
<string>root</string>
<key>WatchPaths</key>
<array>
<string>/usr/local/hermes/modules</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.vmware.launchd.vmware.plist
- mod date: Nov 2 16:11:08 2007
- checksum: 1467462916
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN"
"http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.vmware.launchd.vmware</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/VMware Fusion/boot.sh</string>
<string>--start</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.zqueue.servetome-server.plist
- mod date: Sep 22 07:54:14 2014
- checksum: 1392131937
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/Library/Application Support/ServeToMe/incoming/settings.xml</key>
<true/>
</dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>Label</key>
<string>com.zqueue.servetome-server</string>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.zqueue.servetome-server</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ThrottleInterval</key>
<integer>5</integer>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchDaemons/jp.co.canon.MasterInstaller.plist
- mod date: Nov 11 12:21:11 2014
- checksum: 4111951265
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>jp.co.canon.MasterInstaller</string>
<key>Program</key>
<string>/Library/PrivilegedHelperTools/jp.co.canon.MasterInstaller</string>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/jp.co.canon.MasterInstaller</string>
</array>
<key>ServiceIPC</key>
<true/>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
<key>SockPathName</key>
<string>/var/run/jp.co.canon.MasterInstaller.socket</string>
<key>SockType</key>
...and 5 more line(s)
Contents of /Library/LaunchDaemons/net.sourceforge.MonolingualHelper.plist
- mod date: Sep 16 12:53:32 2012
- checksum: 4229206510
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>net.sourceforge.MonolingualHelper</string>
<key>MachServices</key>
<dict>
<key>net.sourceforge.MonolingualHelper</key>
<true/>
</dict>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/net.sourceforge.MonolingualHelper</strin g>
</array>
</dict>
</plist>
Contents of /System/Library/Security/authorization.plist
- mod date: Jan 7 19:31:13 2015
- checksum: 2720110640
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>comment</key>
<string>The name of the requested right is matched against the keys. An exact match has priority, otherwise the longest match from the start is used. Note that the right will only match wildcard rules (ending in a ".") during this reduction.
allow rule: this is always allowed
<key>com.apple.TestApp.benign</key>
<string>allow</string>
deny rule: this is always denied
<key>com.apple.TestApp.dangerous</key>
<string>deny</string>
user rule: successful authentication as a user in the specified group(5) allows the associated right.
The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0. This defaults to false if not specified.
See remaining rules for examples.
</string>
<key>rights</key>
<dict>
<key></key>
<dict>
<key>class</key>
<string>rule</string>
<key>comment</key>
...and 1850 more line(s)
Contents of /private/etc/authorization.deprecated
- mod date: Sep 30 13:39:21 2013
- checksum: 2773682028
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>comment</key>
<string>The name of the requested right is matched against the keys. An exact match has priority, otherwise the longest match from the start is used. Note that the right will only match wildcard rules (ending in a ".") during this reduction.
allow rule: this is always allowed
<key>com.apple.TestApp.benign</key>
<string>allow</string>
deny rule: this is always denied
<key>com.apple.TestApp.dangerous</key>
<string>deny</string>
user rule: successful authentication as a user in the specified group(5) allows the associated right.
The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0. This defaults to false if not specified.
See remaining rules for examples.
</string>
<key>rights</key>
<dict>
<key></key>
<dict>
<key>class</key>
<string>rule</string>
<key>comment</key>
...and 9729 more line(s)
Contents of /private/etc/ssh_config
- mod date: Oct 1 12:06:10 2012
- checksum: 1281775184
Host *
SendEnv LANG LC_*
Host *
XAuthLocation /opt/X11/bin/xauth
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Aug 21 15:00:01 2010
- checksum: 2170691092
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Reader 9/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.amazon.cloud-player.plist
- mod date: Feb 22 10:43:22 2014
- checksum: 2707474481
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EnableTransactions</key>
<false/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.amazon.cloud-player</string>
<key>Program</key>
<string>/Applications/Amazon Cloud Player.app/Contents/MacOS/Amazon Music Helper</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.amazon.music.plist
- mod date: Jan 12 15:51:16 2015
- checksum: 3668832669
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EnableTransactions</key>
<false/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.amazon.music</string>
<key>Program</key>
<string>/Applications/Amazon Music.app/Contents/MacOS/Amazon Music Helper</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist
- mod date: Feb 17 09:08:58 2015
- checksum: 1189540302
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.FolderActions.folders</string>
<key>Program</key>
<string>/usr/bin/osascript</string>
<key>ProgramArguments</key>
<array>
<string>osascript</string>
<string>-e</string>
<string>tell application "Folder Actions Dispatcher" to tick</string>
</array>
<key>WatchPaths</key>
<array/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist
- mod date: Jul 31 12:13:01 2010
- checksum: 2859079559
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.Safari</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
<string>--sync</string>
<string>com.apple.Safari</string>
<string>--entitynames</string>
<string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ThrottleInterval</key>
<integer>60</integer>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Library/Safari/Bookmarks.plist</string>
</array>
</dict>
...and 1 more line(s)
Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist
- mod date: Feb 17 01:22:03 2015 -
Need help with Berkeley XML DB Performance
We need help with maximizing performance of our use of Berkeley XML DB. I am filling most of the 29 part question as listed by Oracle's BDB team.
Berkeley DB XML Performance Questionnaire
1. Describe the Performance area that you are measuring? What is the
current performance? What are your performance goals you hope to
achieve?
We are measuring the performance while loading a document during
web application startup. It is currently taking 10-12 seconds when
only one user is on the system. We are trying to do some testing to
get the load time when several users are on the system.
We would like the load time to be 5 seconds or less.
2. What Berkeley DB XML Version? Any optional configuration flags
specified? Are you running with any special patches? Please specify?
dbxml 2.4.13. No special patches.
3. What Berkeley DB Version? Any optional configuration flags
specified? Are you running with any special patches? Please Specify.
bdb 4.6.21. No special patches.
4. Processor name, speed and chipset?
Intel Xeon CPU 5150 2.66GHz
5. Operating System and Version?
Red Hat Enterprise Linux Relase 4 Update 6
6. Disk Drive Type and speed?
Don't have that information
7. File System Type? (such as EXT2, NTFS, Reiser)
EXT3
8. Physical Memory Available?
4GB
9. Are you using Replication (HA) with Berkeley DB XML? If so, please
describe the network you are using, and the number of Replica’s.
No
10. Are you using a Remote Filesystem (NFS) ? If so, for which
Berkeley DB XML/DB files?
No
11. What type of mutexes do you have configured? Did you specify
–with-mutex=? Specify what you find inn your config.log, search
for db_cv_mutex?
None. Did not specify -with-mutex during bdb compilation
12. Which API are you using (C++, Java, Perl, PHP, Python, other) ?
Which compiler and version?
Java 1.5
13. If you are using an Application Server or Web Server, please
provide the name and version?
Oracle Appication Server 10.1.3.4.0
14. Please provide your exact Environment Configuration Flags (include
anything specified in you DB_CONFIG file)
Default.
15. Please provide your Container Configuration Flags?
final EnvironmentConfig envConf = new EnvironmentConfig();
envConf.setAllowCreate(true); // If the environment does not
// exist, create it.
envConf.setInitializeCache(true); // Turn on the shared memory
// region.
envConf.setInitializeLocking(true); // Turn on the locking subsystem.
envConf.setInitializeLogging(true); // Turn on the logging subsystem.
envConf.setTransactional(true); // Turn on the transactional
// subsystem.
envConf.setLockDetectMode(LockDetectMode.MINWRITE);
envConf.setThreaded(true);
envConf.setErrorStream(System.err);
envConf.setCacheSize(1024*1024*64);
envConf.setMaxLockers(2000);
envConf.setMaxLocks(2000);
envConf.setMaxLockObjects(2000);
envConf.setTxnMaxActive(200);
envConf.setTxnWriteNoSync(true);
envConf.setMaxMutexes(40000);
16. How many XML Containers do you have? For each one please specify:
One.
1. The Container Configuration Flags
XmlContainerConfig xmlContainerConfig = new XmlContainerConfig();
xmlContainerConfig.setTransactional(true);
xmlContainerConfig.setIndexNodes(true);
xmlContainerConfig.setReadUncommitted(true);
2. How many documents?
Everytime the user logs in, the current xml document is loaded from
a oracle database table and put it in the Berkeley XML DB.
The documents get deleted from XML DB when the Oracle application
server container is stopped.
The number of documents should start with zero initially and it
will grow with every login.
3. What type (node or wholedoc)?
Node
4. Please indicate the minimum, maximum and average size of
documents?
The minimum is about 2MB and the maximum could 20MB. The average
mostly about 5MB.
5. Are you using document data? If so please describe how?
We are using document data only to save changes made
to the application data in a web application. The final save goes
to the relational database. Berkeley XML DB is just used to store
temporary data since going to the relational database for each change
will cause severe performance issues.
17. Please describe the shape of one of your typical documents? Please
do this by sending us a skeleton XML document.
Due to the sensitive nature of the data, I can provide XML schema instead.
18. What is the rate of document insertion/update required or
expected? Are you doing partial node updates (via XmlModify) or
replacing the document?
The document is inserted during user login. Any change made to the application
data grid or other data components gets saved in Berkeley DB. We also have
an automatic save every two minutes. The final save from the application
gets saved in a relational database.
19. What is the query rate required/expected?
Users will not be entering data rapidly. There will be lot of think time
before the users enter/modify data in the web application. This is a pilot
project but when we go live with this application, we will expect 25 users
at the same time.
20. XQuery -- supply some sample queries
1. Please provide the Query Plan
2. Are you using DBXML_INDEX_NODES?
Yes.
3. Display the indices you have defined for the specific query.
XmlIndexSpecification spec = container.getIndexSpecification();
// ids
spec.addIndex("", "id", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
spec.addIndex("", "idref", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// index to cover AttributeValue/Description
spec.addIndex("", "Description", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_SUBSTRING, XmlValue.STRING);
// cover AttributeValue/@value
spec.addIndex("", "value", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// item attribute values
spec.addIndex("", "type", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// default index
spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
// save the spec to the container
XmlUpdateContext uc = xmlManager.createUpdateContext();
container.setIndexSpecification(spec, uc);
4. If this is a large query, please consider sending a smaller
query (and query plan) that demonstrates the problem.
21. Are you running with Transactions? If so please provide any
transactions flags you specify with any API calls.
Yes. READ_UNCOMMITED in some and READ_COMMITTED in other transactions.
22. If your application is transactional, are your log files stored on
the same disk as your containers/databases?
Yes.
23. Do you use AUTO_COMMIT?
No.
24. Please list any non-transactional operations performed?
No.
25. How many threads of control are running? How many threads in read
only mode? How many threads are updating?
We use Berkeley XML DB within the context of a struts web application.
Each user logged into the web application will be running a bdb transactoin
within the context of a struts action thread.
26. Please include a paragraph describing the performance measurements
you have made. Please specifically list any Berkeley DB operations
where the performance is currently insufficient.
We are clocking 10-12 seconds of loading a document from dbd when
five users are on the system.
getContainer().getDocument(documentName);
27. What performance level do you hope to achieve?
We would like to get less than 5 seconds when 25 users are on the system.
28. Please send us the output of the following db_stat utility commands
after your application has been running under "normal" load for some
period of time:
% db_stat -h database environment -c
% db_stat -h database environment -l
% db_stat -h database environment -m
% db_stat -h database environment -r
% db_stat -h database environment -t
(These commands require the db_stat utility access a shared database
environment. If your application has a private environment, please
remove the DB_PRIVATE flag used when the environment is created, so
you can obtain these measurements. If removing the DB_PRIVATE flag
is not possible, let us know and we can discuss alternatives with
you.)
If your application has periods of "good" and "bad" performance,
please run the above list of commands several times, during both
good and bad periods, and additionally specify the -Z flags (so
the output of each command isn't cumulative).
When possible, please run basic system performance reporting tools
during the time you are measuring the application's performance.
For example, on UNIX systems, the vmstat and iostat utilities are
good choices.
Will give this information soon.
29. Are there any other significant applications running on this
system? Are you using Berkeley DB outside of Berkeley DB XML?
Please describe the application?
No to the first two questions.
The web application is an online review of test questions. The users
login and then review the items one by one. The relational database
holds the data in xml. During application load, the application
retrieves the xml and then saves it to bdb. While the user
is making changes to the data in the application, it writes those
changes to bdb. Finally when the user hits the SAVE button, the data
gets saved to the relational database. We also have an automatic save
every two minues, which saves bdb xml data and saves it to relational
database.
Thanks,
Madhav
[email protected]Could it be that you simply do not have set up indexes to support your query? If so, you could do some basic testing using the dbxml shell:
milu@colinux:~/xpg > dbxml -h ~/dbenv
Joined existing environment
dbxml> setverbose 7 2
dbxml> open tv.dbxml
dbxml> listIndexes
dbxml> query { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }
dbxml> queryplan { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }Verbosity will make the engine display some (rather cryptic) information on index usage. I can't remember where the output is explained; my feeling is that "V(...)" means the index is being used (which is good), but that observation may not be accurate. Note that some details in the setVerbose command could differ, as I'm using 2.4.16 while you're using 2.4.13.
Also, take a look at the query plan. You can post it here and some people will be able to diagnose it.
Michael Ludwig
Maybe you are looking for
-
A whole bunch of issues here. I can't install any software. It started when iPlayer stopped working at all. This led me to try to update software versions such as Adobe Air to 3.5 (Failed) then quicktime player 7.6.6 as recommended (Failed) then the
-
Control exceptions or errors in procedure
Hy , I have a proceducre like this: CREATE OR REPLACE PROCEDURE "MY_PROCEDURE"( ) AS BEGIN INSERT INTO tableBackupTable1 SELECT table1.* FROM table1; INSERT INTO tableBackupTable2 SELECT table1.* FROM table2; */*Disable FK*/* for i in (select constra
-
A client of mine can open kodak photo cd images in I Photo but my version will not. I am archiving her work and need to open these files. Do you know how I can do this?
-
Anyone know how to convert h264 .mov files to play in adobe flash player 9?
Software advice?
-
I am trying to add "folder" nodes to this xml String xmlstr = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><definition><folders><folder><folderid>1234</folderid></folder><folder><folderid>5678</folderid></folder></folders></definition>"; XMLDocument xm