Help with Patch install via Zen Wk 3

I have this patch I want to have installed on my users machine without the
user not having to do a thing.
Want it to install automatically - It is MS Patch MS05-011
As I've stated before we are running Zenworks 3
Our own Admin was a whiz at Zenworks - yet he never shared what he knew with
us.
I just want the patch to install - the machine will reboot and end of story.
And when they sign on again - it will not do it all over again
That's what I'm running into.
Is there a way I can create a batch file for this?
My knowledge of this Zen and a batch file is limited
Thanks in advance.

Tomi,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

HT1338 I purchased and tried to download the Lion 10.7 software. I had trouble installing it and spoke with tech support. They helped with the install via a ethernet port. Said it would take a few hours. It did not download and now there is no record of i

I tried downloading the Lion 10.7 software and contacted customer support thinking I needed an upgrade to a higher processor speed.
He stated I needed to download using an eternet cable rather than wireless.
So, I connected the cables and the software upgrade which I paid for began to download.
He stated it would takle about 2 - 3 hours for the download to complete. Somehow the download is paused, no pun intended,
and I cannot get the paused to un pause.
I logged onto my account and the apple store doesn't have a record of the transaction.
So, how do I download the software I paid for?
I appreciate your help.

Hi,
You can try to [https://www.mozilla.org/en-US/firefox/new/ download the latest full installer] and upgrade. Please make sure to right-click the file and '''Run as administrator''' to begin the upgrade installation.
You may also want to [https://support.mozilla.org/en-US/kb/Backing%20up%20your%20information?s=backup&r=1&e=sph&as=s backup] personal data/folder. Firefox stores the personal profile/data separate from its internal files. [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]

Need help with Patch Tool in CS5

I am having a problem using the patch tool in Photoshop CS5. I click on the Patch Tool and select the Source option from the upper tool bar. Then I circle a gray area in the background of my photo and, holding down the left mouse button, I drag the selection to a black area in the background and release the mouse button. Instead of turning the selected area black it just makes the area slightly darker than it was originally. I just don’t understand why I can’t use the patch tool and any help would be appreciated.

Thank you very much for these suggestions. Robert
Noel Carboni <[email protected]> wrote:
Noel Carboni http://forums.adobe.com/people/Noel+Carboni created the discussion
"Re: Need help with Patch Tool in CS5"
To view the discussion, visit: http://forums.adobe.com/message/4308270#4308270

I need help with re installing my apple account for itunes.

Had problems with my itune account, so I uninstalled and now need help with re-installing the program with the songs I have already purchased.

Your iTunes account is something at the iTunes Store online. It is not possible to uninstall it. Do you mean the iTunes application? Even if you delete the application and restore it, it should not have deleted your iTunes library (essentially the contents of the iTunes folder in Music) on your computer unless you did a separate steep and specifically deleted that too. You need to tell us what it was you deleted.

Help with setup of three Zen Micros on the same compu

I have a Zen Micro 4GB setup and working great on our desktop computer. I have the Creative Media Source v3.0.9 and Zen Micro Media Explorer v4.00.22 software installed. I purchased two Zen Micro 6GBs at Christmas for my kids. I have been through the manual and these forums, but no help on how to setup the two new Zen Micros to work with the existing software. The new Zens do show the popup "Creative Media Device Detected", and I can see the new Zens in Windows Explorer. The new Zens do not show up in the Zen Micro Media Explorer. Do I have to install the Zen software for each of the three Zens? If not, any ideas? Thanks

railman wrote:
I have a Zen Micro 4GB setup and working great on our desktop computer. I have the Creative Media Source v3.0.9 and Zen Micro Media Explorer v4.00.22 software installed. I purchased two Zen Micro 6GBs at Christmas for my kids. I have been through the manual and these forums, but no help on how to setup the two new Zen Micros to work with the existing software. The new Zens do show the popup "Creative Media Device Detected", and I can see the new Zens in Windows Explorer. The new Zens do not show up in the Zen Micro Media Explorer. Do I have to install the Zen software for each of the three Zens? If not, any ideas? Thanks
It appears that you may have both PlaysForSure Zen Micro and non-PlaysForSure Zen Micro. As such, you should install both plugins for MediaSource. A newer version of MediaSource is also available to you.
Here is what you should do:
- Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site.
- Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource from your product download site.
- Download and install the latest Creative MediaSource Plugin for PlaysForSure devices (version .00.8) from your product download site.

Tips and help with re-installing Lion over Snow Leopard

I had MAJOR issues with my initial Lion install on my Mid-2009 MBP- so much so, that I had to wipe my hard drive and re-install Snow Leopard and all my applications. My major issues were as follows:
1. All my files were locked out- I could open them in most cases, but I couldn't overwrite them- Lion had aded some funky permissions scheme that I didn't recognize, and my user name wasn't present on any of them. In some cases, I couldn't even open files, even though they were resident on my hard drive (and in my own user folder) before the upgrade to Lion.
2. Apple's own Universal Binary apps wouldn't work after the upgrade. Final Cut Pro 6, in particular, came up with a message that it was a "PowerPC" app and wouldn't run- yet Shake 4.1 would run just fine!
3. Adobe Creative Suite 3- after the upgrade, my Abode Ceative Suite 3 apps worked just fine, for about a day- that is, until I tried to correct the file permissions issue by changing permission on a few of my folders in my User folder (and electing to change permissions in the files contained therein)- at which point my Adobe apps told me that they were damaged and needed to be reinstalled. Yet after uninstaling and reinstalling the entire Creative Suite 3 times, I still would get the same message.
My entire workflow is Adobe CS and FCS2- why chould I have to pay the upgrade costs just to use Lion? FCPX is completely brkoen for my workflow and eqipment, and Adobe can't even guarantee that CS5 works with Lion- so why does Apple insist on Lion when it's hardly even compatible with its own products?
I really want to use Lion, but I am looking for some tips on instalation to kep these problems from happening again. I didn' have ANY of these problems with upgrading OS 10.2 through 10.6. Any help with prepping my system/files for upgrading would be helpful. Thanks!

any new Apple kB articles
http://support.apple.com/kb/index?page=articles
Me, I think clone backups are more useful, and only use T.M. as secondary.
Using Cloning as a Backup Strategy
I'd assume that professional apps may need to be tested still; and of course check to see what you have that depends on PowerPC code and Rosetta first. That has some in a tither.
A clone lets you still be able to boot Snow Leopard. Check out Carbon Copy, SuperDuper.

Help with Classic install

Hi all, I'm sure this question has been asked before so forgive me. I've looked all around and found solutions that were 'similar' to my problem but none that will work. here we go.
I just got an old Mac G4 tower (AGP) and bought Tiger to put on it. (not sure what version of OSX was on it before) Anyway I did a clean install and everythig works great. No problems at all.
I was installing a program yesterday that turns out needs Classic support. Right now there is no updated version of this program and I need to run it. My machine doesnt have Classic support. How do I install it? I've read that there is a second install disk that you can use my my boxed version of OSX has only one disk. I searched the disk and see that there is a Classic folder on it with an install app but when i run it it doesnt do anything. It just informs me that neither of my hard drivers have Classic.
I'm stuck. Any help would be greatly appreciated. I REALLY need to run this legacy application.
G4 (AGP) Mac OS X (10.4.7)
G4 (AGP) Mac OS X (10.4.7)

I'd find that 2nd DVD, it's supposed to come with OSX
10.4. Follow the instructions on this article and an
"Applications (OS9)" folder will appear in your
Macintosh HD.
http://docs.info.apple.com/article.html?path=Mac/10.4/
en/mh763.html
OS 9 has not shipped with OS X since Jaguar.
However, OS 9 does ship with PPC Macs. It should be on the install DVD, or on the 2nd or 3rd CD, depending on which Mac. Example: my original 700 MHz eMac shipped with OS X 10.1 and OS 9.2.2 on separate CDs, both bootable. My 1.25 GHz eMac shipped with OS X 10.3 and OS 9.2.2, with the OS X disc being bootable and the OS 9.2.2 disc being part of the applications suite and not being bootable. My 2.1 GHz iMac shipped with OS X 10.4 and OS 9.2.2 on the same DVD. OS 9.2.2 is again part of the application suite and cannot be booted from the DVD. The Intel Macs at the office shipped with OS X 10.4 and that's it, no OS 9.2.2 as Classic does not run on them.
A boxed set of OS X 10.2 shipped with OS 9.2.2 on a separate CD. (It was a white 'universal install' CD and would install on all Macs produced up to that time.) I have such a boxed set on a shelf in the cupboard right now. A boxed set of OS X 10.3 shipped with four CDs, none of which was OS 9. I have such a boxed set on a shelf near my eMac right now. A boxed set of 10.4 shipped with a single DVD. I have such a boxed set on a shelf near my eMac right now. I have just opened the box and verified by sight: one DVD, OS X only. A further check of the contents of that DVD show no mention of OS 9.
The OP will need to have the system CDs or DVD which shipped with his Mac to install Classic.
iMacG5 2.1GHz 1.5GB RAM Mac OS X (10.4.7) eMac 1.25 GHz 2 GB, assorted Windows boxes

Help with Tiger install and getting hot keys and start up manager to work

this open firmware issue, how do you get around it? Wonder if it is causing me trouble; i.e. shift and other keys do not work and keeping me from booting with Tiger install. How do I access these keys then?
I did a clean install on a secondary internal drive (device 1) 150GB Maxtor
but it won't boot and "restart" brings me back to install process...
have repaired disk -- OK -- repaired permissions -- OK. Re-installed and repaired. Peripherals are off or disconnected. Current OS is 10.3.9 on 20 GB HD (device 0)
What now? Would appreciate some guidance. Thank you.
Ali
This is my CPU
Build 7W98
Machine Model: Power Mac G4 (AGP graphics)
CPU Type: PowerPC G4 (2.8)
Number Of CPUs: 1
CPU Speed: 450 MHz
L2 Cache (per CPU): 1 MB
Memory: 2 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Serial Number:

Hi Ali,
re: this open firmware issue, how do you get around it? I really did not understand the support page you link to...but wonder if it is causing me trouble; i.e. shift and other keys do not work. How do I access these keys then?
Is this a Wireless KB you have? Many aren't recognized until after booting.
Hmmm, you've got the firmware Update needed for the AGP to install/use 10.4...
I think I'd try this, worked for me on 3 such macs...
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the Erase tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume, then choose MacOS Extended Journalled, select the Partition tab.
6. Click Erase & look for Security Options. choose Zero 1 pass."
Formatting & Partitioning a Hard Drive in OS X - Tiger and Leopard...
http://www.kenstone.net/fcphomepage/partitioningtiger.html
Hopefully then a fresh install will work.
Oh, what are the Jumper settings on hat drive? Apple recommends Cable Select, but I find different settings work with a dizzying variety of Drive combos.

[SOLVED] need help with virtualbox install

I'm a relative n00b to Arch, haging migrated from Ubuntu (pha!!). Arch rocks!
However, my beloved virtualbox isnt playing ball!
After many hours of getting arch up and running I now need some assitance please with VirtualBox PEUL. I've googled and search these wikis and found:
http://aur.archlinux.org/packages.php?d … s=0&SeB=nd
http://www.mail-archive.com/vbox-users% … 02889.html
http://wiki.archlinux.org/index.php/VirtualBox
but, I dont know how to install.
I used yaourt (having spent another many hours trying to get to speed with what Arch AUR is and yaourt!!)
This is what I did:
1. Visited http://wiki.archlinux.org/index.php/VirtualBox and followed PEUL instructions...
2. Click on AUR link and then click on PKGBUILD and it downloaded a PKGBUILD from here http://aur.archlinux.org/packages.php?d … s=0&SeB=nd
3. Then went back to the wiki http://wiki.archlinux.org/index.php/VirtualBox and clicked on VirtualBox_1.5.6-1_Linux_x86.run and downloaded the file.
4. In accordance with the instructions on the wiki, I ran makepkg
HOWEVER, I get errors!!:
# makepkg --asroot
==> Making package: virtualbox_bin 1.5.6-1 (Thu May 1 20:06:33 BST 2008)
==> WARNING: Running makepkg as root...
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found VirtualBox_1.5.6-1_Linux_x86.run in build dir
-> Found vbox.install in build dir
-> Found vbox_build_module in build dir
-> Found vboxnet.patch in build dir
-> Found interfaces in build dir
==> Validating source files with md5sums...
VirtualBox_1.5.6-1_Linux_x86.run ... FAILED
vbox.install ... Passed
vbox_build_module ... Passed
vboxnet.patch ... Passed
interfaces ... Passed
==> ERROR: One or more files did not pass the validity check!
This is what is in the downloaded files dir:-
ls -l
total 48
-rw-r--r-- 1 daz users 3642 2008-05-01 20:06 PKGBUILD
-rw-r--r-- 1 daz users 26055 2008-05-01 20:05 VirtualBox_1.5.6-1_Linux_x86.run
-rwxrwxrwx 1 nobody nobody 217 2008-01-08 20:58 interfaces
drwxrwxrwx 2 root root 125 2008-05-01 20:06 src
-rwxrwxrwx 1 nobody nobody 2717 2008-02-22 18:22 vbox.install
-rwxrwxrwx 1 nobody nobody 174 2008-02-22 17:45 vbox_build_module
-rwxrwxrwx 1 nobody nobody 2179 2007-12-30 12:31 vboxnet.patch
Can anyone help please? In Ubuntu all this was just installed with dpkg -i VirtualBox.deb
I'm sure Arch is just as "simple" :-)
Last edited by keratos (2008-05-04 07:54:14)

grave wrote:Or try the bin file no problem here yaourt -S virtualbox_bin
Good idea, I checked this out originally but it didnt work so I went for "manual" install.
The download from yaourt never starts, just hangs - the server is dead or something?? ...
# yaourt -S virtualbox_bin
==> WARNING: Building unsupported package as root is dangerous.
Please run yaourt as a non-privileged user.
==> Downloading virtualbox_bin PKGBUILD from AUR...
==> Last 5 comments ordered by date (asc):
Comment by: chris_es on 20080414 [17:02:11]
Hello!
Thanks a lot for this package :o)
Just a quick comment about where to copy the Sun .run package. It should be put to where the tarball from AUR was extracted.
In my case, it is /home/[users]/virtualbox-bin/
Cheers
Chris
Comment by: fi-dschi on 20080419 [22:46:37]
You may download the run-file at
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_SMI-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=innotek-1.5.6-G-F@CDS-CDS_SMI
Comment by: GGLucas on 20080421 [00:40:38]
Can't get the kernel module working in 2.6.25, vbox_build_module completes fine, but I get the following error:
$ sudo modprobe vboxdrv
FATAL: Error inserting vboxdrv (/lib/modules/2.6.25-ARCH/misc/vboxdrv.ko): Unknown symbol in module, or unknown parameter (see dmesg)
with these messages in dmesg:
vboxdrv: Unknown symbol change_page_attr
vboxdrv: Unknown symbol change_page_attr
Comment by: Geekosaurio on 20080422 [03:54:09]
Maybe you could find this instructions helpful
http://www.mail-archive.com/[email protected]/msg02889.html
I've not tried this myself but I will do it soon and post the info here. Maybe create a separate package for 2.6.25 kernels it's a good idea.
Comment by: ise on 20080429 [18:12:57]
The vboxdrv from the mailinglist of virtualbox runs here without problems on 2.6.25 with vbox 1.5.6
First Submitted: Sun, 11 Mar 2007 00:52:22 +0000
Last Updated: Fri, 22 Feb 2008 18:26:15 +0000
virtualbox_bin 1.5.6-1 (Unsupported): Powerful x86 virtualization - binary version (non GPL - free for personal use and evaluation)
==> virtualbox_bin dependencies:
- libidl2 (already installed)
- libxslt (already installed)
- qt3 (already installed)
- e2fsprogs (already installed)
- sdl (already installed)
- libstdc++5 (already installed)
- patch (already installed)
==> Edit the PKGBUILD (recommended) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> WARNING: This PKGBUILD contains install file that can be dangerous.
vbox.install
==> Edit vbox.install (recommended) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of 'virtualbox_bin'? [Y/n]
==> ----------------------------------------------
==>y
==> Building and installing package
==> Making package: virtualbox_bin 1.5.6-1 (Fri May 2 06:06:28 BST 2008)
==> WARNING: Running makepkg as root...
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading VirtualBox_1.5.6-1_Linux_x86.run...
--2008-05-02 06:06:29-- http://195.34.175.98/download/1.5.6/VirtualBox_1.5.6-1_Linux_x86.run
Connecting to 195.34.175.98:80...
Last edited by keratos (2008-05-02 05:52:33)

Help with printing document via wireless

The printer is connected to PC via wireless and has worked ok for a long time.
Thr printer seems to be working ok (copying ok).
Although printer icon is ready, any document sent to print sits in a queue and does not print. I have downloaded the updated version off the internet (HP website) for the HP 3050A driver and installed ok (who knows).
Can you help?
cheers

Hi @PPritchard ,
I see that you are having issues with the print jobs just sitting in the queue and won't print. I will certainly do my best to help you.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.
On the printer control panel, press the Wireless button (). The Wireless menu opens.
Press the button () next to the Down Arrow () to scroll through the options and select Print Reports, and then press the button next to OK.
Press the button () next to Wireless Test to print the page.
If you have a valid IPv4 address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Internet Explorer)
If it loads the printer's network page then the printer is on the network.
Power cycle the router, computer and printer.
Try printing again.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Help with Konverter install

I am trying to install Konverter from the AUR but it is not working
Here is my terminal output
archy@tuxbox:~$ yaourt -S konverter
==> Downloading konverter PKGBUILD from AUR...
konverter 0.93-6 (NOT SAFE): A KDE MEncoder frontend for easy video conversions, scaling and cropping.
==> konverter dependencies:
- kdelibs (package that provides kdelibs already installed)
- mplayer (already installed)
- xine-lib (already installed)
==> Edit the PKGBUILD (recommended) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of 'konverter'? [Y/n]
==> ----------------------------------------------
==>y
==> Building and installing package
==> WARNING: Sudo is used by default now. The --usesudo option is deprecated!
==> Making package: konverter 0.93-6 (Sat Mar 22 22:55:04 MST 2008)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading konverter-0.93.tar.gz...
--2008-03-22 22:55:04-- http://www.kraus.tk/projects/konverter/sources/konverter-0.93.tar.gz
Resolving www.kraus.tk... 89.31.143.1
Connecting to www.kraus.tk|89.31.143.1|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: http://www.tr0ll.net/kraus.tk/projects/konverter/sources/konverter-0.93.tar.gz [following]
--2008-03-22 22:55:05-- http://www.tr0ll.net/kraus.tk/projects/konverter/sources/konverter-0.93.tar.gz
Resolving www.tr0ll.net... 87.106.16.5
Connecting to www.tr0ll.net|87.106.16.5|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 414900 (405K) [application/x-tar]
Saving to: `konverter-0.93.tar.gz'
100%[=======================================>] 414,900 104K/s in 4.3s
2008-03-22 22:55:10 (94.3 KB/s) - `konverter-0.93.tar.gz' saved [414900/414900]
-> Found konverter-qt3.patch in build dir
==> Validating source files with md5sums...
konverter-0.93.tar.gz ... Passed
konverter-qt3.patch ... Passed
==> Extracting Sources...
-> bsdtar -x -f konverter-0.93.tar.gz
==> Entering fakeroot environment...
==> WARNING: Sudo is used by default now. The --usesudo option is deprecated!
==> Starting build()...
QMAKESPEC has not been set, so configuration cannot be deduced.
Error processing project file: /tmp/yaourt-tmp-archy/aur-konverter/konverter/src/konverter/konverter.pro
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build konverter package.
archy@tuxbox:~$
Thanks for any help.

I'd find that 2nd DVD, it's supposed to come with OSX
10.4. Follow the instructions on this article and an
"Applications (OS9)" folder will appear in your
Macintosh HD.
http://docs.info.apple.com/article.html?path=Mac/10.4/
en/mh763.html
OS 9 has not shipped with OS X since Jaguar.
However, OS 9 does ship with PPC Macs. It should be on the install DVD, or on the 2nd or 3rd CD, depending on which Mac. Example: my original 700 MHz eMac shipped with OS X 10.1 and OS 9.2.2 on separate CDs, both bootable. My 1.25 GHz eMac shipped with OS X 10.3 and OS 9.2.2, with the OS X disc being bootable and the OS 9.2.2 disc being part of the applications suite and not being bootable. My 2.1 GHz iMac shipped with OS X 10.4 and OS 9.2.2 on the same DVD. OS 9.2.2 is again part of the application suite and cannot be booted from the DVD. The Intel Macs at the office shipped with OS X 10.4 and that's it, no OS 9.2.2 as Classic does not run on them.
A boxed set of OS X 10.2 shipped with OS 9.2.2 on a separate CD. (It was a white 'universal install' CD and would install on all Macs produced up to that time.) I have such a boxed set on a shelf in the cupboard right now. A boxed set of OS X 10.3 shipped with four CDs, none of which was OS 9. I have such a boxed set on a shelf near my eMac right now. A boxed set of 10.4 shipped with a single DVD. I have such a boxed set on a shelf near my eMac right now. I have just opened the box and verified by sight: one DVD, OS X only. A further check of the contents of that DVD show no mention of OS 9.
The OP will need to have the system CDs or DVD which shipped with his Mac to install Classic.
iMacG5 2.1GHz 1.5GB RAM Mac OS X (10.4.7) eMac 1.25 GHz 2 GB, assorted Windows boxes

Need Help With My 40G Creative Zen Touch Mp3 Play

Got this beautiful mp3 player for a steal at only $95 dlvd!
Works great, only problem is I just installed the software and when I run the Organizer thing, it doesnt detect any mp3s. So when I go into my folders containing mp3's they dont show up. I tried to associate formats using the File Options in the settings menu but there are no file types listed to associate! Im confused at what to do.
Also when the program software was installing I kept getting error messages relating to the registration of certain parts of the program, it still installed complete but gave me a error message to report to Creative. Everything works fine so far though?
Can anyone help me out here or recognize the problem?

micromouse wrote:
Your installation did not complete successfully.
<FONT face=Helv size=2> Here is what you should do:
- Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site. Make sure that you install this first before installing the rest of the MediaSource plugins listed below.
- (Depending on your product and firmware)
For non-PlaysForSure Zen series: Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource from your product download site.
or:
For PlaysForSure Zen Touch: Download and install the Creative Software Suite for PlaysForSure-enabled Creative Zen Touch Players.
- If it is listed for your product: Download and install the latest Creative MediaSource Plugin for CD Burner 3.0.8 from your product download site.
Hi thanks for the help, Im not sure if my ins the Plays for sure model or not? Its the Creative Zen Touch 40 GB. I bought it without a manual so im not positi've how to check the details. It came with a software installation CD, that is what I used for the software. So does this mean I just need to download the plugins you listed? Is that what is affecting the Organizer in the fact that it doesnt display mp3s?

Patch deployment via Zen works

what is the best way to do this for a few houndred workstaions?
a step by step way
thanks

great -
thanks for that great info -
"Craig Wilson" <[email protected]> wrote in message
news:[email protected]..
> There is not really a "simple" "step by step" answer.
>
> Unless you have a patch management tool, some definite work on your end
> will be required.
> I have an in-house tool that I wrote for doing this, but it was written
> at work for my employer with much time and effort so there is no chance
> I could send this out.
>
> http://www.zenworks.com has some tips that can get you started and tools
> that can help.
> Expect a fair amount of effort on your part.
> It should still beat doing things manually.
>
> If there are a few patches you want out, you could just try a "good
> enough" approach such as creating a monthly run batch file that calls
> all of the patches you are concerned worried about with a few silent
> switches. ( Note: the required switches for a silent install seemed to
> have changed over time.)
>
> Antz wrote:
>
> > what is the best way to do this for a few houndred workstaions?
> > a step by step way
> >
> > thanks
>

Need help with problem installing OSX 10.5.2 update

I tried to download 10.5.2 update via Software update. After download the was a problem concerning the "signature" and the download was placed in my trash. I tried to empty trash, but it said it could not because the item "MACOSXUpd10.5.2.pkg is in use." So I downloaded the combp update from the Apple web site. After down load I tried to install, and I get a dialog box which says: "The following disc image failed to mount" and under image it says: MACOSXUpdCombo10" and under reason: "error-4960."
What do I do now?
Thanks for your help.

Knoles wrote:
I tried to download 10.5.2 update via Software update. After download the was a problem concerning the "signature" and the download was placed in my trash. I tried to empty trash, but it said it could not because the item "MACOSXUpd10.5.2.pkg is in use." So I downloaded the combp update from the Apple web site. After down load I tried to install, and I get a dialog box which says: "The following disc image failed to mount" and under image it says: MACOSXUpdCombo10" and under reason: "error-4960."
What do I do now?
Thanks for your help.
Never continue installing software on a computer with a problem. If you could not empty the trash, that's the immediate thing to fix. Then you should proceed with the update. There is clearly something wrong with your system.
Reboot and see of you can "flush" the trashbin. If not, we have a problem to solve.
Installing the update is the second step. We should deal with the first issue first.

Please help with new install

Superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem and not SWAP or UFS or something else, then the superblock is corrupt and you might try running e2sck with and alternate superblock: e2sck -b 8193 <device>
I get this error after a new install and reboot, any idea what this mean and how to fix it.
Appreciate all the help.
This is a AMD 1.8mgz and 1 gig of ram on Asus mb.

I just downloaded the image archlinux 2009.02 core i686 and was able to install with no issues. I was able to reboot successfully. It appears to be an issue with the newest installer specificly. turtle, try the old installer and see if you can't get things working. This should work for the OP too.
I got it to boot after an install for the first time using this older install image.
I wasted 8 freaking hours trying to figure out the problem and the answer is as simple as use the older installer. Shesh.
I was wrong. I installed once successfully in one of the computers on an 80 gb hard drive. When trying to reinstall on two different 120 gig hard drives the error repeated itself. I'm spent on this. I'm going to have to try another distro.
After two more installs I can get it to load but I'm now having a superblock last load time is in the future error.
Used fsck on all my partitions to fix the problem and now I have a successfully booting arch system. Guess I won't have to jump ship just yet.
------update, maybe this will help somebody----------
I'm not sure why but the partitions on my first disk are all referred to as sda and not hda even though all my hard drives are IDE (via command 'df', fstab has them listed by UID).
Even weirder, when I installed a new hard drive into the machine, I had to format it and mount it by referring to /dev/sdb and not /dev/hdb like I expected. This is odd as I don't even have any sata connections in my machine. Could someone tell me why this is happening. Is it a 'feature' or a 'bug' of arch?
lldmer, I wish I had listened to you when I was trying to install over and over the day before yesterday. Looks like you hit the nail on the head on this one. I wish I had tried what you suggested. The weird thing is that when I was originally having problems, the fstab did have the drives listed by UID. I wonder if changing those UID entries to /dev/sda style entries would have fixed my problems.
If I install arch again, I'll have to try that.
Last edited by bodyhead (2009-10-26 14:55:14)

Help with Patch install via Zen Wk 3

Similar Messages

Maybe you are looking for