Help with PC to Mac data conversion?

Just bought first Mac and had files transferred from PC but most of music and pics did not transfer correctly or at all... Folders are gone. Song info is old. Will bring back to store but any other tips/suggs?

PJG20, how did your transfer your data. Did you use Migration Assistant or some other method? Also if you bought the computer new why does your profile indicate you are running Lion 10.7.5? Please provide more information.
BTW if you purchased the machine new you are covered by 90 days of free AppleCare telephone support and you should be contacting them. You can locate the phone number on your part of the planet by clicking AppleCare Contact Info .

Similar Messages

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

Hi there. Can anyone help with restoring my Mac to it's origin white, it has got very grubby. Thanking you.

Hi there. Can anyone help with restoring my Mac to it's origin white, it has got very grubby. Thanking you.

From here:
http://forums.macrumors.com/archive/index.php/t-863188.html
"You can use the Magic Eraser to clean the white plastic."
"thanks for the Magic Eraser tip, I willtry that..so far I've been using disinfectant wipes, which work pretty well, too because of the alcohol in them"

Help with converting hex to date and time

Hi!
I am using snmp4j libraries to walk the mib tree. The system date is getting returned in 11 hexadecimal octets. I require help in converting it to date and time. I looked up the RFC convention of what each octets represent. Require help with conversion.
Eg: 07:db:06:0a:29:1d:00:2b:05:1e
Thanks,

Octets Contents Range
1-2 year 0..65536
3 month 1..12
4 day 1..31
5 hour 0..23
6 minutes 0..59
7 seconds 0..60
(use 60 for leap-second)
8 deci-seconds 0..9
9 direction from UTC '+' / '-'
10 hours from UTC 0..13
11 minutes from UTC 0..59
For example I just took the time an hour ago it came out as
07:db:06:13:12:11:1a:00:2b:05:1e
I have to convert this as a date long value to send it.
Do I have to write an utility of my own to do it?

Help with hours between two dates

Hi I need help with the below query
select count(*),a.col1,max(a.dt),min(a.dt)
from tab1 a
where a.dt > to_date('01-JUL-08','dd-mon-yyyy')
group by col1
having count(*) >=2
and (max(a.dt) - min(a.dt))* 24*60*60 > 360;
I am trying to pull the records with more than 2 entries, and having more than 6 hrs difference between max date and min date. When I am trying to execute this I am getting an error at "(max(a.dt) - min(a.dt))* 24*60*60 > 360".
any ideas how can I pull the records more than 6 hrs?
Thanks in advance!

Sorry guys...here is the erros i am getting
ORA-00932: inconsistent datatypes: expected INTERVAL DAY TO SECOND got NUMBER
my version : 9.2
SQL>
SQL> @ver
BANNER
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
PL/SQL Release 9.2.0.8.0 - Production
CORE    9.2.0.8.0       Production
TNS for Solaris: Version 9.2.0.8.0 - Production
NLSRTL Version 9.2.0.8.0 - Production
SQL>
SQL>
SQL> --
SQL> drop table tab1;
Table dropped.
SQL> create table tab1 as
2    select 'stin_8723646' as col1, to_date('7/22/2008 5:48:32 AM', 'mm/dd/yyyy hh:mi:ss AM') as dt from dual union all
3    select 'stin_8723646', to_date('7/22/2008 1:34:12 PM', 'mm/dd/yyyy hh:mi:ss AM') from dual union all
4    select 'stin_8723646', to_date('7/22/2008 3:16:25 PM', 'mm/dd/yyyy hh:mi:ss AM') from dual union all
5    select 'stin_8723647', to_date('7/22/2008 1:10:07 AM', 'mm/dd/yyyy hh:mi:ss AM') from dual union all
6    select 'stin_8723647', to_date('7/22/2008 4:19:00 AM', 'mm/dd/yyyy hh:mi:ss AM') from dual union all
7    select 'stin_8723647', to_date('7/22/2008 9:52:44 AM', 'mm/dd/yyyy hh:mi:ss AM') from dual;
Table created.
SQL>
SQL> alter session set nls_date_format = 'mm/dd/yyyy hh:mi:ss am';
Session altered.
SQL>
SQL> select * from tab1;
COL1         DT
stin_8723646 07/22/2008 05:48:32 am
stin_8723646 07/22/2008 01:34:12 pm
stin_8723646 07/22/2008 03:16:25 pm
stin_8723647 07/22/2008 01:10:07 am
stin_8723647 07/22/2008 04:19:00 am
stin_8723647 07/22/2008 09:52:44 am
6 rows selected.
SQL>
SQL> --
SQL> select
2    count(*),
3    a.col1,
4    max(a.dt),
5    min(a.dt)
6 from tab1 a
7 where a.dt > to_date('01-JUL-08','dd-mon-yyyy')
8 group by col1
9 having count(*) >=2
10 --and (max(a.dt) - min(a.dt))* 24*60*60 > 360
11 and (max(a.dt) - min(a.dt))* 24 > 6;
COUNT(*) COL1         MAX(A.DT)              MIN(A.DT)
         3 stin_8723646 07/22/2008 03:16:25 pm 07/22/2008 05:48:32 am
         3 stin_8723647 07/22/2008 09:52:44 am 07/22/2008 01:10:07 am
SQL>
SQL>isotope

Help with Capturing Business Graphics data point

Hi,
I created a BusinessGraphics UI element with SimpleSeries and assigned eventId for the categories and data points. I am able to get the series that is clicked through the event but I would like to know which point (value) is clicked as well.
The steps I followed are
1. Created BG UI element, category and SimpleSeries
2. Assigned eventIDs
3. Created an action class and mapped it to the UI element
4. Code in wdDoModifyView is
     if (firstTime)
       IWDBusinessGraphics chart = (IWDBusinessGraphics) view.getElement("bgCSB");
       chart.mappingOfOnAction().addSourceMapping("id", "pointID");
5. Implemented action class with one parameter (pointID) and able to get the value.
Can someone help me to get the data point values from the user click.
Appreciate your help.
Thanks,
Kalyan

You have done everything right, except I don't think you can do this with simple series.
Create something like this:
in the context:
series-> (this node can be with 1..1 cardinality and 1..1 selection)
   points->
       label (string)
       value (int)
       pointId (string)
in the business graphics:
create one series (not simple one) and add to it one point of numeric type.
in the properties of business graphics bind seriesSource to series context.
Series: bined poitSource to series.points
Series_points: bind eventId to series.points.pointId
                        bind label to series.points.label
                        bind valueSource to series.points
Values (these are the numeric values): bind value to series.points.value
in wdDoModify method do the same thing as you have done already.
Now, when you click on a point you will receive in your event in pointId variable the pointId context attribute value.
Best regards,
Anton

Help with CF Reports and Dates

Can anyone here help me with
This
post ? I have been waiting for 3 days and after 4 posts no one
has been able to answer, please help!! I'm stuck on my project only
because of this. Thank you very, very much.
Nelson.

Sorry, I don't use cfreport so I would not be any help with
what may be inside the total_sales_report_by_date.cfr template.
However, shouldn't you be executin your query inside of your .cfm
emplate, then passing the query result to your report as a query
parameter within your cfreport tag, rather than passing the date
parameters in cfreportparam tags?
Phil

Help with reloading back up data

I had to restore my bb pearl 8120 the other day. Backed up all data and then had a few problems with it. I have now managed to sort it all but cant reload all my backed up data, I have lost a lot of phone number that I really need.
Any help with this would be fab.
Thanks

Hello,
Please provide more details, such as:
Specific BB Model (8120)
Specific BB OS level (all 4 octets)
Specific Desktop Software level (also 4 octets)
Carrier
Country
The specific symptoms you witnesses -- "cant reload all my backed up data" doesn't tell us much. Specific details of exactly the steps you attempt and exactly the results you see would be helpful.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Please help with opening old mac AE file on a pc

Hi,
With the latest version of AE on a pc I tried opening older mac version .aep file created I believe in 1999. I had very little hope so I wasn't surprised to see this message:
"After Effects error: this file was created with an older version of After Effects [3.0 (Macintosh PPC)], and can’t be opened. You can convert this file using an older version of After Effect and resaving."
It is not clear which version should be used, Pc or Mac, and if at the end that file could eventually be opened in thet latest AE on a pc.
I will greatly appreciate any help with this.

Thanks Mylenium
Rebuilding is not an option. It is a lot of work and I need this as a portfolio item. I created a promotional interactive CD with Macromedia Director in 1999 for a sign company. I created 19 short animations for it with After Effects 3 using old PPC Mac. I haven't used After effects since then but recently several new clients asked me if I can make animations from that nature. So, I'm trying to use my old work as a demonstration of my creative skills. The problem is that the animations were rendered tiny with 309 x 228 pixels to fit in the interactive interface of the presentation intended for the small monitors used at that time. I took the animations from the interactive CD and using the latest AE on a pc, I created a rough composition with running the animations one after another. To make the animations a bit larger I scaled most of them to 320 x 240 hoping it will look better.
In my archives I have the project files and all .ai vector graphics used for the animations. I still have the old PPC Mac retired somewhere in the closets and installer CD with After Effects 3 and 4. I thought it would be great if I can somehow open the files in the latest version on a pc but if not I guess I have to take out that old mac are render to higher resolution using this ancient machine and AE version. And I'm wondering if all this is worth it.
I will appreciate any tips, advices, things to be aware, etc, and how to make this looks better on YouTube.
Oh, and another question by the way, I haven't been current to the animation software for a long time and wonder if this kind of presentational animations are best suited for creating with Flash or After Effects is still OK?

Can you help with a TV / Mac mini configuration?

So.... the plan is to buy a new 32-40 inch TV for the bedroom upstairs. All of my TV cables and Internet stuff are at the basement. I am not planning to bring any cables upstairs (TV or Ethernet) so this is what I am thinking:
- HDTV 32-40 inch
- Powerline to bring network connectivity upstairs
- Slingbox PRO-HD
- Mac mini to use SlingPlayer, Hulu, iTunes, DVD Player etc. etc.
- One of those Air Mice
These are the questions I have:
1) The HDMI on the new Mac mini transfers sound as well as video. Correct? No need for extra adaptor?
2) Can some suggest a good Air Mouse that works well with the new Mac mini?
3) Anything I need to make sure the TV is capable in order to work well with the Mac mini (except of course for the HDMI port)? Resolution? Other ports? Options?
4) Anyone with a similar configuration? Any issues that you might see with this configuration?
Thanks

I cannot answer any of your other questions, but, yes, the Mid 2010 Mac mini carries both a digital audio and video signal from the HDMI port.
Sorry, what is an air mouse?
Dah•veed

Urgent-Need help with code for Master data enhancement

hi Experts,
I have appended YMFRGR field(Table MARC) to 0MAT_PLANT_ATTR datasource.
The key fields in the MARC table are MATNR and WERKS.Can anybody help with the user exit to populate this field,as am pretty new to ABAP.
Thanks in advance

Hi,
go through this link which has the similar problem:
https://forums.sdn.sap.com/click.jspa?searchID=1331543&messageID=2794783
hope it helps.
Thanks,
Amith

Help with form sending the data to email

I have looked all over the Internet for help with this. I have tried numerous video tutorials and for some reason I can't get it to work. I have created a form in flash cs4 AS2. It is a contact information form where the user fills out their information and sends it. I have created a the form in a movie clip (I have also tried it not in a movie clip) with the form components inside that movie clip. I have given each component on the form an instance name.
The form has:
Full name (with instance name=name)
Company (with IN =company)
Title (with IN = title)
Phone (with IN = phone)
Email (with IN = email)
Topic combobox (with IN=topic)
Message box (with IN=msg)
Submit button (with IN=submit)
I need help with the actionscript writing. I am VERY new to flash and have never done any scripting really. Does anyone have a sample file I can look at to see how it works or can someone IM me and I can send my file for them to help me?
My IM is logan3975
Any help is greatly appreciated. I consider myself a pretty technical person so I do learn quick...I just need some guidance until I wrap my head around how this all works. Thanks.

Here's a link to a posting elsewhere some had had that may provide some useful info (?)
http://board.flashkit.com/board/showthread.php?t=684031

Help with selecting chuncks of data from a table

Hi all,
I need help with a query that should do the following.
I have a table with vessel messages, and I need to get the last "NumMsgs" messages from a group of vessels.
The problem I have is that if I order the table by Vessel_ID, MessageDate DESC, I can´t do ROWNUM < NumMsgs (<-- Then number of messages to be shown is a user parameter)
I know it should be something like:
select * from (
select *
from Messages m
where TRIM(m.V_ID) = '11597' /* I was trying for a single vessel atm */
order by m.V_ID, m.MESSAGEDATE desc
where rownum < :NumMsgs
Any ideas?
Thanks in advance !

Hi,
What about :
select *
from (
select m.*, row_number() (order by m.V_ID, m.MESSAGEDATE desc) rn
from Messages m
where TRIM(m.V_ID) = '11597' /* I was trying for a single vessel atm */
where rn < :NumMsgsAnyway, I don't very well understand your problem, your query work fine, see for example :
SQL> ed
Wrote file afiedt.buf
1 select object_name, object_id
2 from
3 (select object_name, object_id, row_number() over (order by object_id desc) as rn
4   from dba_objects)
5* where rn < 4
SQL> /
PS_TL_MTCHD_118     71763
PS_TL_MTCHD_117     71762
PS_TL_MTCHD_116     71761
SQL> ed
Wrote file afiedt.buf
1 select object_name, object_id
2 from
3 (select object_name, object_id
4   from dba_objects
5   order by object_id desc)
6* where rownum < 4
SQL> /
PS_TL_MTCHD_118     71763
PS_TL_MTCHD_117     71762
PS_TL_MTCHD_116     71761
SQL> Nicolas.
Message was edited by:
N. Gasparotto

Help with a new Mac user

Hi,
New to MAC. Is there a way to do a restore to out of box set up? I also need to find a local group to go to to help learn about the Mac G4. Want to learn more about how to use the software. It is 9.2 os.

derftl, welcome to Apple Discussions & the Mac community.
You can download a PDF copy of your Mac's user manual at this link.
http://docs.info.apple.com/article.html?artnum=50018
I doubt that you will find an OS 9 manual in any computer store. You might find a copy by doing a Google web search, or possibly in a used book store. Also, suggest you join LEM-Swap for buying & selling Mac stuff. http://groups.google.com/group/lemswap
After you join, post a WTB (want to buy). Ask for a book on using OS 9.
 Cheers, Tom
Go to this site & see if there is a User Group near you.
http://www.apple.com/usergroups/find/
Message was edited by: Texas Mac Man

HT3096 Someone please help, I'm a broke a$$ college student who needs help with a power Mac G5

Im considering buying a power mac G5 but only cuz its all i can afford and i got an idea about hooking ut up to my tv but i would want to be able to use a wireless keyboard and traction pad but i did some reserch online and found out i need a airport extreme with 2.0 EDR to enable bluetooth which is a requirement for the wireless keyboard. Where can I find the AirPort Extreme with Bluetooth 2.0+EDR card? There dosent seem to be any place online that sells it and lets say I do install the airport extreme card and enable wifi on a power Mac G5, will I be able to use a apple wireless keyboard with it? And just a side question, for the age of the computer what OS should I have installed, I'm not to femilliar with apple software, the only apple products I have are old iPods n a 4s. Oh and I would mainly use it for going online, a little bit of vid editing, watching YouTube vids, homework and uploading and listing to music, I would love to wirelessly sync my iPhone to the power Mac wirelessly.

Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself
    Reset OS X Password Without an OS X CD — Tech News and Analysis
    How To Create A New Administrator Account - Hack Mac

Help with PC to Mac data conversion?

Similar Messages

Maybe you are looking for