Help with PDF docs

How do I fix PDF when it open in a larger resolution?

Thanks for your help, it's been resolved..
Tom Cianci
On Sun, Nov 30, 2014 at 7:50 PM, Pat Willener <[email protected]>

Similar Messages

HELP WITH PDF TO WORD DOC

pLEASE HELP WITH CONVERTING A PDF REPORT TO A WORD DOC WHERE i CAN MAKE CHANGES AND PRINT A NEW REPORT.

Hi Christine,
It looks like you have a subscription to our ExportPDF service. Follow the steps in our Getting Started Guide to convert your PDF to Word: http://forums.adobe.com/docs/DOC-2412
You should be able to edit your file in Word after the conversion.
-David

Help with PDF's in Flash

I need to make a hyper link to jpegs, and while this is easy
enough, the images are already in a PDF doc. I would love to not
have to go page by page and save them out as jpegs. Is it possible
to link a hyper link to a specific page in a specific PDF ? And if
not a hyper link is there some other way of clicking on some text
or something and telling it to go to page 2 of Test.pdf ?
-Thanks

I'm totally confused - i think it is your terminology - when
you say things like "window" - it is
very hard to tell what you mean. "Window" can refer to so
many different things. Then you say things
that popup at first glance can't be seen - even more
confusing. When you say "when I open the window
more..." what "window" are we talking about? Are you
previewing in a browser? Or is this inside the
DW IDE? Or the Flash IDE?
It's probably a very simple solution but I can't figure out
what you are physically looking at, what
it looks like now, and what it should look like based on your
workflow.
sorry - trying to help.
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
howtocheatinflash.com
undesirablenumberone wrote:
> just to stating the obvious, ....i'm a total novice.
>
> i'm using the same file from dreamweaver, just renaming
it....then i change
> the placeholder to correspond with the new file...then i
save it and
> refresh....I notice that when i preview it in flash that
as a flash item, when
> the window with the nav bar in it pops up at first
glance you don't see it, but
> if i open the window more then the text is there ...but
still doesn't show up
> in dreamweaver.......
>

Need help with PDF/X-1a

I am beyond frustrated here so I hope someone can help me!!!! Ii have Adobe 8 Standard and I can't find the PDF/X-1a in my distiller. I need this particular preset to upload a book cover. The website won't accept any other format. The only thing I have in my distiller is PDF/A-1b.
Does anyone know where I can get the correct distiller? Everyone I know with Adobe 8 has the PDF/X-1a in their options and they don't remember having to do anything special to get it.

Assuming you have Acrobat installed, it would not hurt to verify compliance after the document is created. With the doc open (on my vesion 9) Advanced > Print Production > Preflight > PDF/X Compliance > Verify compliance with PDF/X-1a hit analyze
Note that a document must have a Title in the Title box under Document > Properties (ctrl+d) to pass X-1a and, for whatever reason, analyze and fix cannot add this.
And I'm far from the resident expert here..

Weird problem with PDF docs

So this doesn't have anything to do with Apple per se, everyone on this board has always been so helpful. For the past few weeks, I have been unable to view any PDF documents. (It was the same for anything flash on a website, but that mysteriously fixed itself.) I've downloaded Adobe about 5 times, no luck. I never had this problem before. It's so annoying because when I need to see a PDF doc I have to use my boyfriend's Dell (UHG!!!) Please help! Thanks

Hey John,
Thanks for your reply. I used your advise (sort of) to open PDF docs. I figured out that if I right-click on the link and "save link to desktop" I can then right-click on the file and choose "open with preview." It's kinda a pain in the butt, but at least it opens. Thanks!

BLOB Column with PDF docs

I already read a different ways to extract the PDF docs from oracle table and open it through forms. All of them with java classes, webutil integration and dbms_lob.
But, if I need an other way to show it (select the column and open it) through the forms module, I can do it. Like Developer 6i, we can defined a OLE container field in forms and query the table and show the BLOB data.
This are my scenerio:
Oracle DB: EE 9.2.0.6.0
Developer: 6i Rel 2 & 10g v. 10.1.2.0.2 (for test and eventually for migrate to production environment, with iAS R 9i)
I already read if I need to use java, dbms_lob or webutil, I need to use it through iAS and in some cases I need to create a DAD.
But, If have 10g in developer enviroment just for test and I don't want to use a iAS, do I have any other way to select a BLOB column (with a PDF files store in there) from a oracle table and be able to open it with acorbat reader.
thank you a lot guys and sorry about all this message (related with the same) but I am no a guru oracle developer.
AM

Rechecked and was not logged on to user, checked the error view and got
TEXT_INDEX_FRI 03/30/2001 1: AAAIt+AAFAAAAmDAAJ DRG-11207: user filter command exited with status 137
searched some of the articles here on this error, checked that listener was running correctly for extproc, added to the listener the ENVS=LD_LIBRARY_PATH line
added roles, resource, connect, ctxapp
added to PATH and LD_LIBRARY_PATHs,
but still get the above error
does work though for simple text insert case, so seems to be related to documents in a blob field. Any other suggestions or queries that I can do to troubleshoot this? Could it be the way it is loaded?
================
my sql loader control file
LOAD DATA
INFILE '/chem20/stuff/Load_docs2.dat'
INTO TABLE imed.cmgendoc
APPEND
FIELDS TERMINATED BY ','
(Doc_id char,
author char,
doc_name FILLER CHAR(255),
act_doc LOBFILE(doc_name) TERMINATED BY EOF,
mimetype char(128))
==================
my dat file
2,ted the frog,/chem20/stuff/snmp.pdf,application/pdf
3,ted the dog,/chem20/stuff/config.pdf,application/pdf
4,ted the cat,/chem20/stuff/oemcn.pdf,application/pdf
5,ted the rat,/chem20/stuff/oemer.pdf,application/pdf
6,ted the cow,/chem20/stuff/oemug.pdf,application/pdf
7,ted the bug,/chem20/stuff/servlets.pdf,application/pdf
8,ted the bird,/chem20/stuff/pg.pdf,application/pdf
9,ted the sheep,/chem20/stuff/install.pdf,application/pdf
null

Help with pdf tasks

Hello,
I am trying to automate a couple of specific tasks with pdf files but I am having some trouble. At my job we are printing files to pdf but afterwards we must go back and edit the pdf files. Basically what we need to do is this (in order):
1) Rotate the first 'one to three' pages. The first page(s) need to be rotated counterclockwise but it can be 1-3 pages that need this. All we know is that they always appear first. These pages are very similiar in content so I was thinking about making the program search for a keyword common to those pages then rotate it if it finds that keyword. That way we can ensure that its only rotating the pages which need to be rotated.
2) The last 3 pages of the document need to be moved to the top. These documents vary in number of pages so I cant just tell the program to move certain pages numbers to the top. All we know is that its always the last 3 pages of any document that need to be moved to the top. Also, just for clarification is another way to reorder pages in Acrobat besides dragging them with the mouse?
Any input would be greatly appreciated.
Thanks
Fazal

Both of these could be implemented using JavaScript, perhaps using a batch sequence. #2 is easy, and #1 may or may not be possible/reliable based on the actual content of the document.
For #1, a script is able to loop through the words on a page to search for one or more words. If found, it can look at the position of the word on the page, and if it meets the position criteria, use the setPageRotations document method to rotate the page.
For #2, just use the movePage document method to move the last three pages.
If you need help with the code, consider posting in the Acrobat Scripting forum. Include more information for #1 if you do.

Help with PDF Generation

We are currently evaluating LiveCycle ES to potentially convert numerous Pro/E 3D drawings to PDF. Unfortunately, I am having a difficult time finding the proper resources to help achieve this. What we would like the process to do is:
1) Take a Pro/E file, and apply a forms template
2) Add an "Exploded View" animation for the 3D drawing (such as what can be generated by Adobe 3D Reviewer)
3) Expose the "Bill of Material" to the template fields
4) Save the generated PDF to a defined folder
5) Perform these steps for a "watched folder" for when new drawings are submitted
In LiveCycle Workbench, I have been able to read a Pro/E file and apply our template. But I cannot find information on how to achieve the other steps.
Could somebody please point me to specific resources and/or samples that would help with this? Any help would be very appreciated.
Thanks!

Thanks for your reply.
If I'm understanding you correctly, option 1 probably won't work for this situation, because we're working with existing ProE drawings -- hundreds, if not thousands, of them. So, they don't want to go back and add the exploded view. Unless you're saying that we could use javaScript to generate the exploded view and BOM from the ProE files?
Do you know of an example (or other resource) that describes either of the options you outlined? Could you explain a little more?
Thanks again!

Help with PDF Javascript calculation involving checkboxes

Hello Everyone,
I have a PDF Form, and need help with a calculation.
For the sake of simplicity, Lets say I have 5 fields. FSA1 and FSA2 are checkboxes. TotalClaimed1 and TotalClaimed2 are text fields which allow only a numerical input.
The last box, FSA_Total, should add the value from TotalClaimed1 if FSA1 is checked, and it should also add the value from TotalClaimed2 if FSA2 is checked.
The code is malfunctioning, however. Something is causing it to add to the total every time the box is checked. Its almost like the checking off of the box is what causes the addition.
It seems like the code is being read as "When the box is checked, add the value to the total", so each time the box gets checked, it adds to the total again.
and it should be "IF the box is checked, add the value to the total" so if there is a value in the field, and the box is checked, that value is passed on to the total; and if the box is not checked, the value is ignored.
Can anyone spot what might be causing this? Code is below.
var claim1 = parseInt(this.getField('TotalClaimed1').value),
    claim2 = parseInt(this.getField('TotalClaimed2').value),
    fsabox = parseInt(this.getField('FSA_Total').value);
if (this.getField('FSA1').value == 'Yes') {
    fsabox += claim1;
if (this.getField('FSA2').value == 'Yes') {
    fsabox += claim2;
event.value = fsabox;
Thanks
Thisguy1234

This is a custom calculation script for FSA_Total, correct? The code is working correctly, it's just not what you want. Assuming this is a custom calculation script in the FSA_Total field, it should be something like:
var sum = 0;
var claim1 = parseInt(getField('TotalClaimed1').value, 10),
    claim2 = parseInt(getField('TotalClaimed2').value, 10),
// Add field values if corresponding check boxes are selected
if (getField('FSA1').value !== "Off") {
    sum += claim1;
if (getField('FSA2').value !== "Off") {
    sum += claim2;
// Set this field value
event.value = sum;
Why are you using parseInt, exactly?

HT4611 Black page with .pdf docs?

What do I need to open pdf docs on Safari for SnowLeopard? Out of the blue and "capute" I'm not able to see pdf docs anymore.

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Business Subscription Based Website with PDF/.doc downloads

I'm new to the Apple world and LOVE IT! I am beginning the design of a business website and trying to use iWeb. I'm not sure it will support two critical functions: 1) subscription based service - I saw the topics of using PayPal for retail but what if the readers are paid subscribers with automated monthly draft fee. individual login/passwords will be required. recommendations? 2) Subscribers will view pdf/.doc files and then download to their own computers. I saw two postings indicating concerns about document sizes. We are a research based company and our analysis what the members are buying, thus, they may be downloading several large documents weekly. We anticipate ultimately 2000-5000 subscribers. Yup, the range is pretty large because we need to prove ourself. We estimate starting with 100 but hitting 2000 within 6 months. If business takes off, we may need to go to a traditional website developer but proof-of-concept is needed for additional funding.
Do you recommend MobileME for this volume? We were planning on a traditional hosting company. Thanks!

MobileMe would be no use for this as it doesn't have the ability to run scripts.
Host Excellence, who I host with, can do all this kind of stuff and also have built in ECommerce...
http://www.iwebforbusiness.com/Tools-Resources/Website-Hosting.html
In the long run, if you are anticipating any kind of volume sales, you may want to look at the services of companies who specialize in the sale and delivery of digital media....
http://www.esellerate.net/solutions
http://www.kagi.com/kagisolutions/digital.php
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

Help with PDF form download

Could anyone help please. I have completed a form and saved it, then I went back into it and made a couple of changes and now I cannot download it as a PDF file. Here is the error message I keep getting
There is nothing else open on my mac, so I don't understand it. Any advice would be greatly appreciated. Thanks.

Hi;
The general things to try are:
1) Make sure that youdo not have the file open, close any applications that might have had the file open
2) Make sure you are saving to a location you can "write" to, such as your Desktop (not a read only location)
3) Try giving the file a new name when saving (you probably need to add ".pdf" or you might end up with a file with no extension and you'd get another error message)
4) Try restarting the web browser
5) Try another web browser
6) If all else fails restart your computer and try again
Let me know if those do not get you going again.
Thanks,
Josh
PS - I see Genevieve has just responded as well, I am leaving my response up since I mention trying another browser since that just resolved the same issue for another user...
PSS - We now have the following FAQ for this issue:
http://forums.adobe.com/docs/DOC-4141

Help with PDF form responses

Hey there!
I have two issues with online form data collection and am completely stumped. It's a real struggle to find useful documentation for Acrobat forms!
#1 - I have created a form uploaded it to Acrobat.com, and have been able to collect test form data. In the local responses portfolio, I'm able to use the 'Update' button to bring the latest form data into the portfolio. But I would like to have a colleague be responsible for monitoring the form data and we're running into problems. He's able to open the portfolio and has full access, however the 'Update' button is greyed out so he is unable to bring in new form data. We've already updated his 'Acrobat.com' username/password in Acrobat preferences to match mine, but still no luck. Any help?
#2 - Some computers are having issues with electronic submission. My best guess is that this is to do with Acrobat versions, as the issues all seem to come from computers where the form is completed using Acrobat Reader 8. The form was created with Pro 9, and form submission works for both Pro 9 and also Reader 9. Is there something I can do here? (And yes I know that it's a free upgrade to 9, but 8 is still in the official build for our organisation and I don't really have time to wait for them to complete an upgrade!)
Thanks in advance for any help you can give.
Jarrod

Hello Paul,
Thank you for your reply.
I use Ipower for my hosting. I see they use sendmail and the path on the server is - /usr/sbin/sendmail. Would this work?
The way I would like this to work would be:
1) I e-mail the PDF form to the client
2) Client opens and fills in the form
3) They hit submit and the form information eventually gets e-mailed to my business e-mail
I chose to use the HTTP method instead of e-mail because the PDF form says it can not be saved and if the client uses an internet beased e-mail like Yahoo it gets kind of messy.
But, does the HTTP delivery method make it more difficult since this is not embedded in a website?
Sorry, I did not realise this would be as involved as it is. Your help would be greatly appreciated.

Livecycle design 8 Help with PDF forms

I am new to Livecycle 8. I have created a simple PDF form in Livecycle 8 which was orignally an excel form. I set it up with a submit button to submit by email to a designated person. The form is housed on an internal web site for viewers with adobe reader to open and fill out and then submit by email. The goal is for the designated receiver to receive the the same PDF form with the information filled out by the previous viewer. I was successful with the form being emailed to the designated person as long as the peson submitting the form was using adobe professional. If the viewer only has adobe reader, the form would not submit to the designated receiver. Please help?

Reader does not allow a local save of the form and data by default. To be able to add the attachment o an email message a local save must occur. You can Reader Extend your form to allow for this. Open th eform in Acrobat Pro. Under the Advanced menu choose the "Extend Features in Adobe Reader". Follow the wizard and save the result PDF as a different name ....I like to put RE in the name so I know it is Reader Extended. Try the new file.
paul

Help with PDF Form Submission

Hello,
I am using Live Cycle for the first time. I have designed a PDF form that my clients will fill out and then send back to me.
I have a website and thought submitting the form via http would be best but am having a problem with knowing the correct URL an then the server authentication.
When I try to submit now I get an authorization error.
Here is the URL I used in LiveCycle - http://watchmymvp.com/profilesubmissions
This is to a folder a created on the server.
How do I set this up?
Thanks

Hello Paul,
Thank you for your reply.
I use Ipower for my hosting. I see they use sendmail and the path on the server is - /usr/sbin/sendmail. Would this work?
The way I would like this to work would be:
1) I e-mail the PDF form to the client
2) Client opens and fills in the form
3) They hit submit and the form information eventually gets e-mailed to my business e-mail
I chose to use the HTTP method instead of e-mail because the PDF form says it can not be saved and if the client uses an internet beased e-mail like Yahoo it gets kind of messy.
But, does the HTTP delivery method make it more difficult since this is not embedded in a website?
Sorry, I did not realise this would be as involved as it is. Your help would be greatly appreciated.

Help with PDF docs

Similar Messages

Maybe you are looking for