Help with photo studio pro app purchase

Hi purchased the photostudio pro app , but when the device restarted it was nowhere to be seen when i search on app world for it there is no button to re-download and in my app world it shows up as unistalled, but again no option to re-install
Please help, how can i get my money bqck from these rob dogs

Hello!
I suggest that you clear the AppWorld application cache:
1. Open App World
2. Go to My World
3. Follow one (and only one!) of these steps:
3a. For keyboard-based BB's -- Hold down the ALT key and then press, in sequence R, then S, then T
3b. For Touch Screen Only BBs -- Hold the num-lock (!?123) button so it locks and then press, in sequence 3, then 4, then (
3c. For newer (e,g., OS6 and 7) BB's, see this KB:
KB24714 How to clear the BlackBerry App World cache
4. AppWorld should close.
5. If your BB locks after issuing the cache clear, perform a battery pull reboot
6. Return to AppWorld/MyWorld (it may be sluggish while it re-synchronizes).
If step (4) does not happen as listed, then the clear cache did not work.
As for refund request, you seek that via your formal support channels, which always begin with your mobile service provider, who can escalate cases into RIM at no cost to the end user.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • How to get help with refund for in app purchase

    I downloaded the free app "Bakery Story" without realizing it was an app that allowed the user (in this case, my child) to run up a bill very quickly with in-app purchases (using my real money instead of the play money within the game). As soon as I received the statement from Apple about these unexpected purchases, I enabled the parental controls that block purchases from within apps like this. I am trying to use Apple website to find the rightbplace to request a refund on those purchases, but I only get so far with the express lane before I get a "server not responding" message. Any ideas for how to get help? (clicking the Report a Problem" link in the invoice email doesn't work either (and my WI fi Internet connection seems fine).

    These Links may be Helpful
    Mac Apps Store Customer Service
    http://www.apple.com/support/mac/app-store/contact.html?form=account
    iTunes Customer Service Contact
    http://www.apple.com/support/itunes/contact.html

  • Help with DVD Studio Pro Audio Track/Commentary Track

    Hi Everyone -
    I am authoring my first DVD for a film.  I believe I have everything under control - menus, chapter selections, bonus features - except for the director's commentary.
    I have created 2 main menus - one with a button to turn commentary on, another menu with a button to turn commentary off.
    They work fine.
    But when I simulate the DVD, select commentary ON, play movie (commentary track plays) ... Then click the MENU button, it returns to the main menu with the button to turn commentary ON, but the commentary audio track (audio track 2) is still activated at this point.
    Is it possible to tell it to return to audio track 1 if the menu button is pressed, or tell it to go to "main menu 2" if the menu button is pressed?
    I hope my question is clear.
    Thank you.
    Joe G.
    Houston TX

    Each track and story has its own end jump and its own Remote Control selection. If I understand your problem correctly, changing the Remote Control>Menu (in the Inspector window) from Same as Disk to the appropriate Menu should fix the problem.
    If not, a more complete explanation would help.

  • Help with zynga poker In-App purchase

    i play daily on zynga poker using my ipad and today i was short in chips i usually play 200/400k tables i went to buy some chips but no chips appeared in the list else than 350k and 90k and i was looking to buy 10.000.000 chips why this problem happening thx          

    First off, I'd recommend not blowing your real money on poker money in a fake game, the number one reason why Zynga is profitable..
    but you'd have to contact Zynga for your issue I believe.

  • Purchase order for photo studio pro

    Hi I'm looking for my purchase order for photo studio pro !

    [Sources of Templates|http://www.google.com/search?q=purchasedvd+studio+protemplates&start=0&ie=utf-8&oe=utf-8&client=firefox-a&rls=org.mozilla:en-US:offic ial]

  • Hello, I need help with my macbook pro. It looks like I cannot install anything anymore. Everytime I try to install a new software, use the migration assistant or click the lock to make changes, it simply does not react.

    Hello, I need help with my macbook pro.
    It looks like I cannot install anything anymore. Everytime I try to install a new software, I simply get stuck during the installation type process. I put in my password, it does accept it, but it does not go any further.
    I tried to reset the password, put no password, repair the permissions, the disk but nothing will do. I nearly got stuck with the log in screen but finally succeeded in disabling it.
    So I thought I might try to create a new account but I cannot click the lock to make changes. It simply refuses to react.
    I am now thinking about using the migration assistant to save all my settings, data and so fourth, but again I get stuck when I have to type in my password. It accepts it but nothing happens...
    I guess it has something to do with the authorization process, but can't find anything on the internet about it... Can you help me out?
    I am running Lion 10.7.3.
    Regards,
    Nicolas.
    (I apologize if any grammatical/structural mistakes were to be found, english is not my mother-tongue. )

    You probably won't like this suggestion, but I suggest you reinstall Lion.
    First, backup your system. Next, reboot your system, press/hold the COMMAND-R keys to boot into the Recovery HD. Select 'Reinstall Mac OS X'. If you purchased Lion as an upgrade to Snow Leopard, the reinstall process will install Lion 10.7.3. If your system came preinstalled with Lion, you might still get Lion 10.7.2. Both installs are a total install of the OS. None of your apps or data will be impacted. Just the OS.

  • Photo Studio PRO won't Install because I have Photo Studio?

    I purchased Photo Studio and loved it so much I purchased Photo Studio PRO, But when it tried to install it almost completed and then quit!
    I received the confirmation e-mail for the purchase, tried the ALT, r s t and taking the battery out but its still not showing up!
    HELP ME PLEASE!!!

    almost the same thing happened to me....
    i had photo studio free installed then bought the pro version!!
    when it was 90% of the dl completed my phone crashed.....when i turned it on i didnt have photo studio free or pro...
    so im being charged for something i dont have it 

  • I need to generate a still shot from from a video. I would like to accomplish this task using a single application. If this is not possible with my MacBook Pro as purchased from Apple, please recommend which applications I can purchase.

    I need to generate a still shot from from a video I made with my camera. I would like to accomplish this task using a single application. If this is not possible with my MacBook Pro as purchased from Apple, please recommend which applications I can purchase that include this feature. Thanks in advance.

    For FREE do the following:
    When you get to othe part of the video you want a still shot from, put the video on pause. 
    Take a screen shot:  Apple>Shift>4 - which will produce a cross hair so you can manually select which part of the video you want.Check inside either your Applications or Utility folder for an app called Grab.  Will do the above with just a single click.
    If you still want to purchase software, suggest that you do a Google & MacUpdate search.  This way, you can find exactly what you want. 

  • HELP!  DVD Studio pro shows a 3GB movie as 88GB!

    I am realy in deep troubles!
    Doing a (volentary) documentation about my city, the final doc movie will be shown at 7.januar 2006.
    Since 1 1/2 year i am working on DVD projekt and nearly finished.Suddenly DVD Studio pro goes crazy.
    I have a lot experiances with iMovie and iDVD but not with Production Suite (FCP + DVD Studio pro) .Maybe i have some misstakes done with FCP or DVD studio pro. But i can't see what and why because during this periode i have burened and check it on TV couple of times bevor.I could cry.
    Just have upgraded to the newest Production Studio pro Version and same result.
    Ok, one thing i have changed, and later the Problems stared!
    In DVD Studio pro you can say how much motion you have.
    small, meduim,often i guess (have it in german)
    This setting worked and i could one time burn a DVD.
    I can say the quality was better, better color and less noise or moire.
    I changed it back, but no success.
    I have seen in the forum discussion about audio which might
    doe troubles and some advises using a.peak tool.
    I have checked the aiff files and there are terrible big!
    350 MB the biggest. I am totaly confiused because it worked bevor. Have checked the sequenzes from FCP which still works.
    What would you suggest first befor i jump out of the window.
    Many thanks for any helping hand
    Sven

    Finaly i have solved my problem!
    The forum and the helpers did guide me in the right direction.It was not logicaly to me why it work again.
    With FCP i could view the sequenz correct.
    Then i used compressor-2 with DVD Best Quality, 90min 2 Pass 90min. Best motion. GOP closed.
    The output i imported into DVDStudio pro.The import was about 4 minute while bevor it was a few seconds!
    I did "clean up" DVDStudio Pro removoed the dvdstudio....plist file -> same result
    I did start a new FCP projekt with a new Sequenz, imported all the work i have done befor (lot of work)
    and used compressor again.
    Then i imported with DVD Studio Pro the compressor files
    (this time dolby ac3 audio file) and the import was done very quick.
    I could burn the dvd (2.3gb instead of 88GB) and a first quick look this (very early) morning was good!
    I chosed this way because i am not sure does working with multiple projekts (not sequenzes) can disturbes the other projekts if they use the same movie. So i will continue with a Projekt, finish them, and start the next from scratch. Hope have no problems like this again ...
    regards
    Sven

  • "Incompatible format" with DVD Studio Pro

    I'm trying to put together a DVD with DVD Studio Pro. When I transfer the movie into the "track 1" area in DVD Studio it says "Incompatible format". I've tried going under "preferences", then under the "project" tab and selecting both HD DVD and SD DVD but neither setting makes a difference, it still will not accept the clip. I've gone into the "General" tab under preferences and tried setting the resolution to the same as the movie file and still nothing. Does anybody have any suggestions as to what might be going wrong?
    Just to let you know as well, I have a smaller file that I've tried inserting into DVD Studio and it seems to work fine. Both this smaller file(891MB) and the actual movie that I'm trying to add(22.1GB) have the exact same attributes when checked in QuickTime using "command + i"
    Here's the info for the movie file I'm trying to add:
    Self contained QuickTime file from Final Cut that is about 2 hours long.
    Apple HDV 1080i60, 1440 x 1080 (1888 x 1062), Millions
    16-bit Integer (Little Endian), Stereo, 48.000 kHz
    Normal Size:1920x1080 Current Size:1920x1080 (actual)
    Here's the info for the small video that works:
    Self contained QuickTime file from Final Cut that is about 4 minutes and 39 seconds long
    Apple HDV 1080i60, 1440 x 1080 (1888 x 1062), Millions
    16-bit Integer (Little Endian), Stereo, 48.000 kHz
    Normal Size:1920x1080 Current Size:1920x1080 (actual)
    Any help is appreciated!

    Your best bet is to encode the video outside of DVD SP to an m2v stream. Are you making a SD DVD or HD DVD?

  • Duplicating DVDs made with DVD Studio Pro 4.2.2

    I cannot duplicate dvds made with DVD Studio Pro. I could with my prior version but since upgrading, I am unable to. The duplicator says: Source and target size mismatch - or something like that. I have seen only one other complaint about this and they said to burn the dvd to the hard disc and copy from there. This did not work. Same error message comes up on the duplicator. I can't burn all these dvds one at a time!!!!! Any solutions out there?

    Welcome to the discussions.
    It is also good to include as much information about what you are using to help others see if they can be of assistance. I know it can be frustrating trying to finish up and something goes wrong. Some days many people reply, other times, such as the problem I have with connecting to background process after the last quick update, hardly anyone replies. I hope that someone might be able to offer assistance.
    You say you have 4.2.2, not 4.1.2? I have not seen that update, is it for an intel model? I am still using a Dual G4 1.42 with 4.1.2.
    Which duplicator are you using? It would be good to include that so those using that brand/model can replay.
    Is the DVD you recorded on and the ones used for duplications the same brand/size/type?
    While I know this can take a while, in a pinch, such as not, just keep DVDSP fired up and feeding your DVD burner.
    I only have to do 6 to 8 copies at a time so I use my DVD burner from DVDSP or save the DVD as a disk image using Toast Titanium 8 and opened it in toast to duplicate via the DVD burner.
    Please reply with more information and hopefully others can offer more help.

  • Hello applecare  can you help with the macbook pro i did the update the last one and safari doesn't open anything .. what should i do ?

    hello applecare  can you help with the macbook pro i did the update the last one and safari doesn't open anything .. what should i do ?

    Hello John...
    You may have a Safari third party add on installed that was compatible with the previous version of Safari but not 5.1. Try troubleshooting > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    FYI... this is a user to user forum. If you can't resolve the issue, information for contacting AppleCare  here.

  • TS3297 I i downlaoded flashcards + with the top in app purchase of "US english female" for 1.99 and it shows the purchase with the option to download it for free then it comes back "Failure ?! Receipt verification failed !

    I downloaded flashcards + with the top in app purchase of " US english female" for 1.99 and it shows the purchase with the option to download it again for free then it comes back "Failure ?! Receipt verification failed !  I have deleted the app and reinstalled several times and it still does not work !!!!I have a iphone 4s with the 5.1.1. Thanks

    Lots of people having this problem.  Flash card+ says this is due to a change in the Apple processes receipts...  See posts on their facebook page.  https://www.facebook.com/flashcardsplus/timeline?filter=2

  • I need help with the iPad Remote app to connect to apple TV 2

    I need help with the iPad Remote app to connect to apple TV 2 I have the app already on my ipad and when I open it only shows my itunes library and not the small black Apple TV 2 icon! How do i fix this and i know it's something 

    Get the manual at http://manuals.info.apple.com/en_US/AppleTV_SetupGuide.pdf
     Cheers, Tom

  • Possible to set burn speed with DVD Studio Pro?

    Is it possible to set or adjust the burn speed with DVD Studio Pro ver 3..?

    Build in DVD Studio Pro, then burn in Toast. Toast will let you adjust the burn speed.

Maybe you are looking for

  • Adding more then one file at a time...

    Well I was going to "add file to library" it would take me to where my downloads are then I would go through a bit of it selecting each song until I had about 100 then I would click select and add them to the library but when I got to iTunes their no

  • Syncing Issues with iTunes - 2012 bug?

    I plugged my iPhone 4 into my mini Mac last night to charge before I went to bed.  Both my iPhone and iTunes have the most current software.  When I got up this morning I saw that iTunes had failed to sync with my iPhone.  As a result, my iPhone is u

  • 7.11 Deprecated DCs

    Dear all, My webdynpro dc's have dependencies to deprecated dc's: - tc/bl/jfrc/api - tc/bl/exception/lib I replaced the tc/bl/jrfc/api with tc/bl/jco/api (via CTRL+1) and this seems to be ok. The other one, tc/bl/exception/lib , it has the info that

  • Multi-Factor Authentication with Azure, need to know limitations

    Hello, This forum was recommended as a place to ask MFA questions. The manager desires all the domain admins accounts to use MFA, when used for any purpose, but especially for when these accounts are used for managing the domain, either via workstati

  • Really ticked off with BT wasting customer's time ...

    It's the last bit of the post which I am even more ticked off about, today BT WASTED even more of my time for no reason.  Here's the background though, and the reason for asking (again) for my call back. During last year our area (Pembroke Dock, Pemb