HELP WITH PHOTOSHOP IMAGES-

Hi im setting up a website selling coins and using my ecommerce page it only allows me to upload 1 image onto it, but i need two images( front and back of a coin) and have posted on wix forums on how to get around this, they have said use image editor so i went on photoshop to see if i could put 1 image saced{dsc 001} (front of the coin) next to the other image saved {dsc 002 } (back of the coin) and save it as 1 image and hence upload the combined image on my site but i am unable to do this as im very primitive on computers and my knowledge of photoshop is of a newbie ,
Any help would be greatly appreciated on how to resolve my dilemna of needing to put two mages together to save as 1 image
THANKS ALOT GUYS
RICK

THE HELP IS GREAT,THANKS AGAIN.IN FACT I CANT THANK YOU ENOUGH, A PRIMITIVE LIKE ME WOULD TAKE HOURS,NO IN FACT DAYS TO FIGURE THIS OUT .
HERE IS MY WEBSITE,ITS IN THE MAKING REMEMBER LOL!! SO ITS UNFINISHED AND JUST LEARNING THE ROPES WITH IT, BUT IF ANYONE IS INTERESTED IN SEEING IT HERE IT IS http://www.wix.com/loganus/LIFE-FORCE?partner%5Fid=WMGs4POB1ko%2Da&orgDocID=5Fgn2S9Rf6k%2D a&wsess=eE145%5F4l09teGMQkF%3BuBEUTDlxSzappvDNsTTFkUXAf4Avca4fPxN9V0OewfrAMlxL6DT5g9Qpk%2D a&experiment%5Fid=empty&wixComputerID=wcIA4gJx5TNDWsD4Dk6KcRBPm6gCt0W775j4VhuCjVnlJ4qI6z2I ptsZaNOk822zKkwcXJg74N4LsnODzGc8KA%3D%3D&gu%5Fid=f188c0fe%2D7cea%2D4aa6%2D87ee%2D34b9430b8 8c3

Similar Messages

Be grateful for your help with Photoshop Elements which I have been using for several years.

Be grateful for your help with Photoshop Elements which I have been using for several years. Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements. On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’. 1. Is there a relationship between Elements and My Pictures and is Elements dependant on the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more? Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one? Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop. I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue. I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music. Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response

The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.

Need help with photoshop to find TGA

Need help with photoshop to find TGA on same as because I cant find it there or is it a download you need to get it. And its for photoshop element 12.

Yeah, I thought it was dumb to remove it, too. See:
Save as TGA File ? [Photoshop Elements 12]
for the workaround.

Help with photoshop quitting and AMD graphics

help with photoshop quitting and AMD graphics
im not a techy, but it appears i have to do someting with my amd graphics card - this might be why my software is crashing - ive no idea what to do though

Hi Chris
I have tried to go on the website, then i tried to download the automatic detect because i wasnt sure which driver i had or needed - but it has just downloaded a load of game software - which i dont want ( i dont think)
i have find out my laptop has a amd radeon HD 8750M card, but i dont know what im doing! i would hate to mess my computer up as i am in thailand with no one to help me!
its frustrating as i am paying for CC but cant use it!

Help with Photoshop Elements 9 Organizer

I need some help with my new Photoshop Elements 9 Organizer.
I have not had previous versions of Photoshop, this was a brand new installation. I had previously used Kodak software which came with my camera to organize and edit pictures.
My PC is approximately 6 years old. I have a 2.2 ghz processor and 1.5 GB of RAM. I am running Windows XP Home Edition, Version 2002, Service Pack 3.
The software seemed to install just fine. I then imported some pictures from my Kodak folders into the Photoshop Organizer. After importing pictures I then received the following error message:
'Elements 9 Organizer has encountered a problem and needs to close. We are sorry for the inconvenience.'
If I remove the pictures from the catalog, I no longer get the error message. As soon as I import any pictures, however, I get the error and the software closes. When I reopen the organizer I get the same error after after about 15 seconds
I have tried the following:
uninstalled an re-installed twice
turned off the automatic backup to photoshop.com
I did come across thread 769749 (http://forums.adobe.com/thread/769749) that offered some advice. Based on that, I optimized my catalog (which was empty), repaired my catalog (which was empty). I also created a new catalog and removed the existing (empty) catalog.
All of these efforts have not worked. Each time I try something, as soon as I import any pictures into the catalog, I get 'Elements 9 Organizer has encountered a problem and needs to close. We are sorry for the inconvenience.'
This is brand new software that I am unable to use.
Adobe, please help.

Answers to following queries would help-
* Are you able to import images into Organizer from folder other than your Kodak folders?
* Is your problem happening for importing from a specific set of folders only?
* Is your problematic folder having any video files in it which you are importing into Organizer?

How do I open HELP with Photoshop Elements12?

Hi, I haven't used PSE in awhile and recently bought PSE release 12 so I went through looked at the Users manual, view the Online videos and wanted to check on HELP and the dropdown menu Photoshop Elements HELP (PF1) but nothing happened. I did this is in all three modes (Quick, Guided and Expert) but "help" did not appear so my question is, how do I open HELP with PSE12?
Thanks,
Bob
P.S.- my objective (what I was looking for) were the step by step instructions on how to straighten a photo

To automatically straighten the image and leave the canvas around the image, choose Image >> Rotate >> Straighten Image.
The straightened image contains areas of blank background, but no pixels are clipped.
To automatically straighten and crop the image, choose Image >> Rotate >> Straighten And Crop Image.
The straightened image does not contain areas of blank background, but some pixels are clipped.
If you have a photo with an horizon you can drag a line along it with the straighten tool.
Click Help on the top menu bar for the on-line help files.

Integrating LT slide with Photoshop image in FCE

Hi all. I'm using LT to make text slides to integrate into an FCE project. Here's some background: my video opens with a LT slide, which is laid on top of (i.e., on the track above) a layered Photoshop image. Next, a few of the layers move, and the text slide ends, and then there is a second when just the PS image shows, and then a second LT slide of text superimposes on the PS image. So the PS image lasts for about 7 seconds, and during that time there are 2 different LT titles superimposed, one at 1-3 seconds and then a second one at 4-7 seconds.
My problem is this: there is a little hop in the Photoshop image when the second LT slide appears -- the image gets ever-so-slightly bigger. I think this must have something to do with the Project Properties in LT not agreeing with the size/pixel aspect of my Photoshop image, but I've been adjusting the #s in both programs forever and the problem remains.
Here are the settings I have now:
Photoshop image: 720x480, 72 dpi, Pixel aspect ratio = DV1/DVNTSC (0.9)
LiveType Proj. properties: NTSC 4:3 (640x480, pixel asp ratio=1.0). Note that I've tried variations, too -- switching the Project Prop size to 720x480, switching the pixel aspect ratio to .9...
FCE Project: Easy Setup DV/NTSC
Thanks in advance for the help -- it's a small problem, but is driving me nuts!
JP

No idea what the first part was about.
Are you trying to render the PS in LiveType as a background image?
If you are, don't. Do the compositing in FCE.
You must view the output of all of yor rendering on your targe playback device, not a computer monitor. You blip in the PS image could just be a rendering artifact being displayer one or two pixels too high or low and that may or may not be visible when played out on an interlaced set.
bogiesan

Help with swap images using rollovers

I have a website created using DW CS5. Recently purchased FW CS5 to help with web graphics and design. I am trying to create a list of numbers that will swap with images. The intial page would simply be a list of numbers and 1 static image. Each number, when hovered will change the image with another. I've attempted this by first using DW and not having much success with FW either.
If able to complete this using FW, is it possible to export the file for use in DW? Then insert into an AP Div?

You're over-complicating it.
Simply hit File>Save once you're done in photoshop.
ian

Help with Photoshop Elements, I'm new to it?

So I'm just fiddling around with Photoshop Elements, and I have a picture of a crocodile that I'm trying to turn blue, so I'm using the Smart Brush and Blue Sky effect to change his skin colour.
Firstly, is there an easier way to change the colour of something that I'm missing?
Secondly, how do I control the Smart Brush precisely? The thing is his body is about the same colour as the water so when the brush gets to a certain point the entire image turns blue.
So how do I select the crocodile but not the water?
Thirdly, the brush. I can draw with the brush, but then I get the "wait" symbol and my changes vanish. How do I stop this?
Thanks for replies, and I'm sorry for my noobishness, I just got Photoshop Elements yesterday.

You can make the brush cursor larger & smaller with the bracket keys next to the letter p on the keyboard. This affords more control in making the selection.
Use of the Smart brush tool is probably the easiest way to colorize an object. The tool has a buit-in mask. If you look on the Layers palette (Window>tick layer), the black and white rectangle represents the mask.
Left click on the mask, then access the brush tool (the ordinary brush B) and with a black brush paint over the area where the blue spilled over to the water. If you go too far, paint with a white brush to correct.

Server goes out of memory when annotating TIFF File. Help with Tiled Images

I am new to JAI and have a problem with the system going out of memory
Objective:
1)Load up a TIFF file (each approx 5- 8 MB when compressed with CCITT.6 compression)
2)Annotate image (consider it as a simple drawString with the Graphics2D object of the RenderedImage)
3)Send it to the servlet outputStream
Problem:
Server goes out of memory when 5 threads try to access it concurrently
Runtime conditions:
VM param set to -Xmx1024m
Observation
Writing the files takes a lot of time when compared to reading the files
Some more information
1)I need to do the annotating at a pre-defined specific positions on the images(ex: in the first quadrant, or may be in the second quadrant).
2)I know that using the TiledImage class its possible to load up a portion of the image and process it.
Things I need help with:
I do not know how to send the whole file back to servlet output stream after annotating a tile of the image.
If write the tiled image back to a file, or to the outputstream, it gives me only the portion of the tile I read in and watermarked, not the whole image file
I have attached the code I use when I load up the whole image
Could somebody please help with the TiledImage solution?
Thx
public void annotateFile(File file, String wText, OutputStream out, AnnotationParameter param) throws Throwable {
ImageReader imgReader = null;
ImageWriter imgWriter = null;
TiledImage in_image = null, out_image = null;
IIOMetadata metadata = null;
ImageOutputStream ios = null;
try {
Iterator readIter = ImageIO.getImageReadersBySuffix("tif");
imgReader = (ImageReader) readIter.next();
imgReader.setInput(ImageIO.createImageInputStream(file));
metadata = imgReader.getImageMetadata(0);
in_image = new TiledImage(JAI.create("fileload", file.getPath()), true);
System.out.println("Image Read!");
Annotater annotater = new Annotater(in_image);
out_image = annotater.annotate(wText, param);
Iterator writeIter = ImageIO.getImageWritersBySuffix("tif");
if (writeIter.hasNext()) {
imgWriter = (ImageWriter) writeIter.next();
ios = ImageIO.createImageOutputStream(out);
imgWriter.setOutput(ios);
ImageWriteParam iwparam = imgWriter.getDefaultWriteParam();
if (iwparam instanceof TIFFImageWriteParam) {
iwparam.setCompressionMode(ImageWriteParam.MODE_EXPLICIT);
TIFFDirectory dir = (TIFFDirectory) out_image.getProperty("tiff_directory");
double compressionParam = dir.getFieldAsDouble(BaselineTIFFTagSet.TAG_COMPRESSION);
setTIFFCompression(iwparam, (int) compressionParam);
else {
iwparam.setCompressionMode(ImageWriteParam.MODE_COPY_FROM_METADATA);
System.out.println("Trying to write Image ....");
imgWriter.write(null, new IIOImage(out_image, null, metadata), iwparam);
System.out.println("Image written....");
finally {
if (imgWriter != null)
imgWriter.dispose();
if (imgReader != null)
imgReader.dispose();
if (ios != null) {
ios.flush();
ios.close();
}

user8684061 wrote:
U are right, SGA is too large for my server.
I guess oracle set SGA automaticlly while i choose default installion , but ,why SGA would be so big? Is oracle not smart enough ?Default database configuration is going to reserve 40% of physical memory for SGA for an instance, which you as a user can always change. I don't see anything wrong with that to say Oracle is not smart.
If i don't disincrease SGA, but increase max-shm-memory, would it work?This needs support from the CPU architecture (32 bit or 64 bit) and the kernel as well. Read more about the huge pages.

Help with unloading images AS3

Please can anyone help me. I am new to Action Script and flash and am having a nightmare unloading images. The code below works but I keep getting the following error messages:
TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/removeChild()
at index_fla::MainTimeline/clickSection()
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/removeChild()
at index_fla::MainTimeline/clickSection()
Any help with this would be much appreciated.
var ImgReq01:URLRequest=new URLRequest("images/home/01.jpg");
var ImgReq02:URLRequest=new URLRequest("images/home/02.jpg");
var ImgReq03:URLRequest=new URLRequest("images/home/03.jpg");
var ImgReq04:URLRequest=new URLRequest("images/home/04.jpg");
var ImgReq05:URLRequest=new URLRequest("images/home/05.jpg");
var imgList:Array=[ImgReq01,ImgReq02,ImgReq03,ImgReq04,ImgReq05];
var imgRandom = imgList[Math.floor(Math.random()* imgList.length)];
var imgLoader:Loader = new Loader();
imgLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);
imgLoader.load(imgRandom);
function onComplete(event:Event):void
var randomImage:Bitmap = Bitmap(imgLoader.content);
randomImage.x=187.4;
randomImage.y=218.1;
addChild(randomImage);
//handle events for info buttons...
information. addEventListener (MouseEvent.CLICK, clickSection);
home. addEventListener (MouseEvent.CLICK, clickSection);
galleries. addEventListener (MouseEvent.CLICK, clickSection);
function clickSection (evtObj:MouseEvent) {
//Trace shows what's happening.. in the output window
trace ("The "+evtObj.target.name+" button was clicked")
//go to the section clicked on...
gotoAndStop (evtObj.target.name)
// this line is causing errors when navigating between the gallery and information buttons
var Image:Bitmap = Bitmap(imgLoader.content);
removeChild(Image);

you really should be adding the loader to the displaylist, not the content.
try:
var ImgReq01:URLRequest=new URLRequest("images/home/01.jpg");
var ImgReq02:URLRequest=new URLRequest("images/home/02.jpg");
var ImgReq03:URLRequest=new URLRequest("images/home/03.jpg");
var ImgReq04:URLRequest=new URLRequest("images/home/04.jpg");
var ImgReq05:URLRequest=new URLRequest("images/home/05.jpg");
var imgList:Array=[ImgReq01,ImgReq02,ImgReq03,ImgReq04,ImgReq05];
var imgRandom = imgList[Math.floor(Math.random()* imgList.length)];
var imgLoader:Loader = new Loader();
imgLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, onComplete);
imgLoader.load(imgRandom);
function onComplete(event:Event):void
imgLoader.x=187.4;
imgLoader.y=218.1;
addChild(imgLoader);
//handle events for info buttons...
information. addEventListener (MouseEvent.CLICK, clickSection);
home. addEventListener (MouseEvent.CLICK, clickSection);
galleries. addEventListener (MouseEvent.CLICK, clickSection);
function clickSection (evtObj:MouseEvent) {
//Trace shows what's happening.. in the output window
trace ("The "+evtObj.target.name+" button was clicked")
//go to the section clicked on...
gotoAndStop (evtObj.target.name)
// this line is causing errors when navigating between the gallery and information buttons
if(this.contains(imgLoader){
removeChild(imgLoader);

Help with partial image loss from Viewer to Canvas

Hi--I'm brand new to FCP and would really appreciate any help with my problem. I'm creating 2 second video clips composed of four still images (15 frames...or 500ms each) laid back to back, then rendered. Very simple, I know. The individual images are tiff files that look great in the FCP Viewer. But in the Canvas, part of the image is missing. Specifically, in the center of each image there should be a + sign, about 1cm square. This + should remain constant thoughout the short movie, while the items around it vary (from image to image). (This is a psychology experiment, and the center + is a fixation cross.) The problem is that in the Viewer the + sign is intact, but in the Canvas (and the resulting rendered video), only the vertical bar of the + is present! This is true for every individual tiff, and for the resulting movie. The items around the fixation cross are fine. My question is WHY on earth does the central horizontal bar get "lost" between the Viewer and the Canvas? I've read the manuals, but obviously I've got something set wrong. Also, there is a considerable overall reduction in quality between the viewer and canvas, even though I'm trying my best to maximize video quality. Everything looks a bit blurry. Truly, all ideas are welcome. Sorry if it's obvious. Thanks.
G5 Mac OS X (10.4.3)

steve, i'm viewing on my 23" cinema screen. i read up on quality and know that this is a no-no; that i should only judge quality when viewing on an ntsc monitor or good tv. the problem is that i'll ultimately be displaying these videos on my Dell LCD, so i've got to maximize what i've got. thanks to the discussion boards i have a short list of things to try now. thanks!
-heather

Help with adding image onclick

Hey everyone,
I am making a simple game in AS3 and need help with adding an image once they have click on something.
On the left of the screen are sentences and on the right an image of a form. When they click each sentence on the left, writing appears on the form. Its very simple. With this said, what I would like to do is once the user click one of the sentences on the left, I would like a checkmark image to appear over the sentence so they know they have already clicked on it.
How would I go about adding this to my code?
var fields:Array = new Array();
one_btn.addEventListener(MouseEvent.CLICK, onClick1a);
one_btn.buttonMode = true;
function onClick1a(event:MouseEvent):void
    fields.push(new one_form());
    fields[fields.length-1].x = 141;
    fields[fields.length-1].y = -85;
    this.addChild(fields[fields.length-1]);
    one_btn.removeEventListener(MouseEvent.CLICK, onClick1a);
    one_btn.buttonMode = false;
    //gotoAndStop("one")
two_btn.addEventListener(MouseEvent.CLICK, onClick2a);
two_btn.buttonMode = true;
function onClick2a(event:MouseEvent):void
    fields.push(new two_form());
    fields[fields.length-1].x = 343.25;
    fields[fields.length-1].y = -85;
    this.addChild(fields[fields.length-1]);
    two_btn.removeEventListener(MouseEvent.CLICK, onClick2a);
    two_btn.buttonMode = false;
    //gotoAndStop("two")

I don't know where you're positioning the button that should enable/disable the checkbox but for "one_btn" let's just say it's at position: x=100, y=200. Say you'd want the checkbox to be to the left of it, so the checkbox would be displayed at: x=50, y=200. Also say you have a checkbox graphic in your library, exported for actionscript with the name "CheckBoxGraphic".
Using your code with some sprinkles:
// I'd turn this into a sprite but we'll use the default, MovieClip
var _checkBox:MovieClip = new CheckBoxGraphic();
// add to display list but hide
_checkBox.visible = false;
// just for optimization
_checkBox.mouseEnabled = false;
_checkBox.cacheAsBitmap = true;
// adding it early so make sure the forms loaded don't overlap the
// checkbox or it will cover it, otherwise swapping of depths is needed
addChild(_checkBox);
// I'll use a flag (a reference for this) to know what button is currently pushed
var _currentButton:Object;
one_btn.addEventListener(MouseEvent.CLICK, onClick1a);
one_btn.buttonMode = true;
function onClick1a(event:MouseEvent):void
     // Check if this button is currently the pressed button
     if (_currentButton == one_btn)
          // disable checkbox, remove form
          _checkBox.visible = false;
          // form should be last added to fields array, remove
          removeChild(fields[fields.length - 1]);
          fields.pop();
          // clear any reference to this button
          _currentButton = null;
     else
          // enable checkbox
          _checkBox.visible = true;
          _checkBox.x = 50;
          _checkBox.y = 200;
          // add form
          fields.push(new one_form());
          fields[fields.length-1].x = 141;
          fields[fields.length-1].y = -85;
          this.addChild(fields[fields.length-1]);
          // save this button as last clicked
          _currentButton = one_btn;
     // not sure what this is
    //gotoAndStop("one")
I'd also centralize all the click handlers into a single handler and use the buttons name to branch on what to do, but that's a different discussion. Just see if this makes sense to you.
The jist is a graphic of a checkbox that is a MovieClip symbol in your library exported to actionscript with the class name CheckBoxGraphic() is created and added to the display list.
I made a variable that points itself to the last clicked button, when the "on" state is desired. If I detect the last clicked button was this button, I remove the form I added and the checkbox. If the last clicked button is not this button, I enable and position the checkbox as well as add the form.
What is left to do is handle the sitation where multiple buttons are on the screen. When a new button is pushed it should remove anything the previous button added. This code simply demonstrates clicking the same button multiple times to toggle it "on and off".

Seeking Help with Album Image Issues in iPod Classic

Hi folks -
I have a new 160 iPod Classic and have two album image-related issues I'd appreciate some help with.
In the case of several albums where I'd associated my own art with them in iTunes, the formatting appeared off in my iPod due to the vertical/horizontal proportions. So I corrected the images, replaced the images via iTunes, and re-synced. All of the old images were replaced - except for two. Is there any way to get my iPod to recognize the change to these two images, as it did for all the others?
Secondly, my "The Allman Brothers Band Live at Fillmore East" album was appearing twice in both the Cover Flow and Album list. That was strange, except that after the latest sync it now appears six times! It's only in one place in iTunes, and not erroneously set as a compilation or anything. This is the only album displaying this behavior...
Thanks for any suggestions or advice!
Frank
Message was edited by: frank3si

Yes my e-mail address is [email protected]
Thank you for your kind attention to my problem. I am looking for one on one brief consultation with my laptop in Cincinnati. If not then I will compose a clear question with VI.
These manuals are well known to me NI Visions Concepts ManualIMAQ Vision for LaVIEW User ManuelNI-IMAQ for USB Cameras My problem is moving to the next step of Create an array of USB imagePerform math on array Display results Sincerely,Tom Lohre cell 513-236-1704, [email protected] http://tomlohre.com/images/lafley.jpgAG Lafley, Chairman & CEO of Proctor & Gamble http://tomlohre.com/lafley.htm A.G. Lafley enjoyed hearing of Tom's painting robot and thought it played well to his new book: "The Game-Changer: How You Can Drive Revenue and Profit Growth With Innovation." http://tomlohre.com/newart.htm
Tom Lohre artist/scientist
Has a operating painting robot using RoboLab/RCX
Developing a LabView/ NXT robot that analyzes an image for aesthetic quality.

Need some help with ".png" image.

Good day everyone. Here's the run down. I need to add an
image (image "A") ontop of another image (image"B"). Image "B" is a
paterned background. And Image "A" a logo with a transparent
background.
As it stands I have image "A" as a "png" and as you know....
they are fri**ing huge! Haveing it as a "gif" only presents me with
the IE6 problem of it adding a colored background to the image.
So I'm stuck! Can any one tell me or point me in the
difection of a tutorial to tell me the best way to add an image
with a transparent background in Dreamweaver.
Really need some help with this!
Thanks all!

>Right you can see the work in progress here>
http://www.stclairecreative.com/DoughBoys_Site_Folder/home.html
Before going much further I'd recommend reconsidering the use
of a textured background. They are usually included for the benefit
of the site owner only, and likely to annoy visitors. Studies on
the subject suggest they often lead to usability problems. I do
like to header graphic, but at 200K it's kinda heavy and can
probably be optimized.

HELP WITH PHOTOSHOP IMAGES-

Similar Messages

Maybe you are looking for