Help with Podcast display in iTs

Hello all, I have recorded a podcast in Garageband and published it to iWeb which is hosted in an extension from my Wordpress blog (AngryWeb.net/podcast). After the podcast was approved, I noticed that the artwork wasn't showing up in iTs, I put the artwork into the Garageband file (and have done it in the past with success) but no luck.
I tried deleting the file from the published iWeb page and reuploading it and now I have 2 broken files. Here is the link to the podcast and I'm hoping there is a simple way to fix this so I can start promoting it.
http://itunes.apple.com/us/podcast/angryweb.net/id460916500
Thanks in advance.

Everything is OK. The iTunes Store caches feeds and visits them periodically to check for updates, so that changes can take a couple of days or so to appear: subscribers see changes immediately as their iTunes application reads the feed directly and the Store is not involved.
Only one episode shows in the Store and when subscribing. The podcast image is correctly referenced in the feed, but the Store caches this image separately and it can take several days for it to appear. If you just wait it should appear eventually.

Similar Messages

Can I get help with podcasts? When I try to open the podcasts, itunes crashes, says "itunes has detected a problem and must close", or the spanish equivalent since my xp is in spanish. everything else works fine, it even downloads podcasts and syncs.

Can I get help with podcasts? When I try to open the podcasts tab, itunes crashes, says "itunes has detected a problem and must close", or the spanish equivalent since my xp is in spanish. everything else works fine, it even downloads podcasts and syncs.

The only other thing I can suggest is to use the Repair option for iTunes.
Download the iTunes programme (do not uninstall your current iTunes) and then "install" the new copy. At some stage you should see an option to "install" or "Repair". Take the Repair option.
Once you've done that, if you still have a problem, I don't know what else to suggest, except to search through the discussions to see if anyone else has had the problem and managed to fix it.

Help with CRT display...

Hi all...
I'm facing a nasty problem connecting an external crt display to my MacBook Pro.
First here's the setup:
-Two MacBook Pro 2.4 GHz
-G4 Cube 450MHz
-iBook G3 800MHz
-CRT DPRO750SB 17" (Nec-Mitsubishi)
-CRT AT897D-1 17" (Formac)
-Problem:
I used to connect the DPRO750SB to one MBP with the Apple's DVI/VGA adapter and everything was fine but now the display doesn't light up anymore.
Furthermore, trying to boot with the display hooked up make the computer crash during startup.
-Clues:
The display and its VGA cable seems OK since there is no problem with the G4 Cube (VGA to VGA) nor the iBook (mini-DVI/VGA).
I have no problem using the Formac Display with both MBP (DVI/VGA).
The DPRO750SB icc profile don't show up anymore in the "Displays" Preference Pane.
I'm able to get the DPRO working sometimes by plug the Formac in, unplug it, then plug the DPRO in.
(in this case, the "Displays" Pref Pane says it's the Formac).
I'm really lost now...
Any help would be greatly appreciated...
Thanks
Fabrice

Well BF1942 and 3D mark both run fine, stable, no glitches and run at the size they are supposed to. Does anyone have any suggestions? PLEASE HELP!
twanto

Begging for help with podcast xml file

Hey All,
I have a podcast on iTunes. I am hosting the xml file and podcast mp3s on a friends server so Im not using any service. Everything is working and Ive sucessfully added 4 podcasts so far, and it shows up correctly in iTunes on my PC.
However my podcasts do not showup correct in the iTunes store website, or on idevices. Meaning, I number my shows 001_"NAME" 002_"NAME" etc. Yet in the iTunes store they show up out of order. So my last show is not at the top its at the bottom, and they are all mixed up (like 002, 001, 004, 003 instead of 4,3,2,1) Also the publish date is the same on two of them (and not what i have in the xml file) and doesnt show up at all on the other two. I assume this is a problem with the xml file, yet I dont see any problems with it. But it seems odd that it all works correctly in the actual iTunes program. Ive tried different code, but im very much a noob at it, and everything i find online is from 5 - 10 years ago or wants you to host your podcasts with their site and I dont need that.
Here is the link to the show on the iTunes website so you can see what i mean: http://itunes.apple.com/us/podcast/your-reality-recap/id501295325
If anybody can, would you mind checking out the code in my xml file and letting me know if you see anything thats causing this issue?
I zipped the xml file and put it here: http://www.ericcurto.com/podcast/YRR.zip
I would be truly greatfuly for any help with this. Ive been trying to fix this for days and dont know what else to do.
Thanks!
Eric

Your feed is at http://www.ericcurto.com/podcast/YourRealityRecap.xml (please always post the feed URL, not its contents or a copy).
I don't see the issues you mention. The order in the Store and when subscribing is what I would expect:
The order in the Store depends on clicking the header to the column: the default is the first one. Some of the dates are a day out - this is quite commmon and is probably a time zone issue (it may be different where you are - I'm in the UK). I don't know why you are seeing a garbled order unless you've clicked on one of the other columns in the Store.

Quick help with css display in IE7

Hi, I haven't been on this forum in ages - I have a slight display glitch would love some help with:
http://magma.ie/magmablog-html/index.html
It looks great in the latest and greatest browser (IMHO!): - firefox 3.5.6
http://cl.ly/17cD
but IE7 pops the search field in the sidebar off to the right, at least, according to browsershots.org
http://cl.ly/1A1f
Thanks, H

It looks OK in IE8 but IE7 is having trouble with the #Sidebar width.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Need Help with Address Display

I need help with APEX.
Here's my situation:
I have a report that displays brief employee information. Among the information displayed is the Address. Right now, it's display as:
Mr X
Employee Id
Accounting Department
Address 1
Mr X
Employee Id
Accounting Department
Address 2
I would like it to display
Mr X
Employee Id
Accounting Department
Address 1
Address 2
1) I have thought of using the Break functionality; however, the function only allows break at column 1, 2, 3. As you can see Address starts at column 4. Also, Address has a few columns; Address Line 1, Address Line 2, City, State, Zipcode.
2) Stragg functions - I'm not sure how to implement it since it has more than 1 columns.
Any ideas?
Thanks in advance
Andrew

The example I gave you, using analytic functions is a simple one.
Now, you are saying:
1. some of the employees may have two adresses?
2. if this is the case, your employee appears in the report twice?
3. you don't want his name, employee id and accounting department to appear twice?
4. only his address has to be displayed?
If the answer to all the questions is yes, this kind of query will help you. I repeat:
SELECT CASE
          WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
                                                    employee_id
             THEN NULL
          ELSE employee_name
       END employee_name,
       CASE
          WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
                                                      employee_id
             THEN NULL
          ELSE employee_id
       END employee_id,
       CASE
          WHEN LAG (employee_id) OVER (ORDER BY employee_id) =
                                            employee_id
             THEN NULL
          ELSE accounting_department
       END accounting_department,
       street, postal_code, city, state, country
FROM your_employees_table;Give it a try.
Denes Kubicek

Help with XML, display data on swipe/click

Hello.
I am trying to create a moibile app that displays XML data. It's basically a phone book. I want the data to change when swiped. I can get the data in just fine. I can get it to display fine. I am not seeing the correct image first, however. I think it's a problem with my imagenum variable.
Then, I want to change what is displayed when the user clicks/swipes on the screen. How do I do that?
stop();
var nameArray:Array = new Array();
var countryArray:Array = new Array();
var portraitArray:Array = new Array();
var flagArray:Array = new Array();
var jobtitleArray:Array = new Array();
var imageNum:Number=0;
var totalImages:Number;
//Load XML
var XMLURLLoader:URLLoader = new URLLoader();
XMLURLLoader.load(new URLRequest("recbook.xml"));
XMLURLLoader.addEventListener(Event.COMPLETE, processXML);
function processXML(event:Event):void {
var theXMLData:XML = new XML(XMLURLLoader.data);
totalImages=theXMLData.name.length();
for (var i:Number =0; i < totalImages; i++){
//push xml data into the arrays
nameArray.push(theXMLData.name[i]);
countryArray.push(theXMLData.country[i]);
portraitArray.push(theXMLData.portrait[i]);
flagArray.push(theXMLData.flag[i]);
jobtitleArray.push(theXMLData.jobtitle[i]);
//data is processed
loadData();
function loadData():void {
var thisPortrait:String = portraitArray[imageNum];
var thisCountry:String = countryArray[imageNum];
var thisName:String = nameArray[imageNum];
var thisJobtitle:String = jobtitleArray[imageNum];
var thisFlag:String = flagArray[imageNum];
var dataLoader:Loader = new Loader();
dataLoader.load(new URLRequest(portraitArray[imageNum]));
dataLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, dataLoaded);
function dataLoaded(event:Event):void {
//I want to start with image 0 (img1.jpg) and cycle through with a mouse click (finger swipe on iOS)
stage.addEventListener(MouseEvent.CLICK, loadMainImage1);
function loadMainImage1(event:MouseEvent):void {
   portraitUILoader.source=thisPortrait;
   flagUILoader.source=thisFlag;
   selectedName.text=thisName;
   selectedCountry.text=thisCountry;
   selectedJobtitle.text=thisJobtitle;
//add to imageNum (1);
imageNum++;
if (imageNum < totalImages) {//stopping at img2
trace("imageNum " + imageNum);
trace("image name (thisPortrait) " + thisPortrait);//losing image 4 somewhere
loadData();
trace("Total Images " + totalImages);
//click to move past the home screenI'd like to ditch this. don't know how.
homeScreen_mc.addEventListener(MouseEvent.CLICK, goNext);
function goNext(event:MouseEvent):void
nextFrame();
*/here's the output:
imageNum 1
image name (thisPortrait) images/img1.jpg
imageNum 2
image name (thisPortrait) images/img2.jpg
imageNum 3
image name (thisPortrait) images/img3.jpg
Total Images 4
Total Images 4
Total Images 4
Total Images 4
It starts the display on image 1 (the second in the series img2.jpg)*/

Thank you.
That helped. I get the correct images in the output, but not in the display. I also get the following error. Any chance you could help with that?
new output after moving the increment:
imageNum 0
image name (thisPortrait) images/img1.jpg
imageNum 1
image name (thisPortrait) images/img2.jpg
imageNum 2
image name (thisPortrait) images/img3.jpg
imageNum 3
image name (thisPortrait) images/img4.jpg
TypeError: Error #2007: Parameter url must be non-null.
at flash.display::Loader/_load()
at flash.display::Loader/load()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/loadData()
at iOS_fla::MainTimeline/processXML()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()

Help with Conditional Display and Validation

Version 4.1.1.00.23
Hello,
I'm having a difficult time with a conditional display and validation I'm hoping someone can help with.
Requirements:
When the Start Date (Datepicker) and/or End Date (Datepicker) change then display the Change Reason (Select List) and Change Description (Textbox)
If the page is saved without entering a Change Reason display a validation error message that the Change Reason cannot be empty (NULL)
What I've tried
Create a Dynamic Action on the Start Date
Event: Change
Selection Type:Item(s)
Items(s): P51_START_DATE
Condition: none
True Action Section:
Action: Show
Fire on Page Load: Checked
Show all page items on the same line: No
Affected Items Section:
Selection Type:Item(s)
Item(s): P51_CHANGE_REASON,P51_CHANGE_DESC
I've also created a Dynamic Action with similar settings for the P51_END_DATE.
I created a Validation for the P51_CHANGE_REASON as Function Returning Error Text:
DECLARE
    v_start_date    work_items.start_date%TYPE;
    v_end_date      work_items.end_date%TYPE;
BEGIN
    SELECT start_date
          ,end_date
    INTO   v_start_date
          ,v_end_date
    FROM   work_items
    WHERE work_items_id = :P51_WORK_ITEMS_ID;
    IF ( (v_start_date != TO_DATE(:P51_START_DATE,'DD-MON-YYYY') OR v_end_date != TO_DATE(:P51_END_DATE,'DD-MON-YYYY') ) AND
          :P51_CHANGE_REASON IS NULL ) THEN
        RETURN 'Change Reason must have a value';
    END IF;
END;
The Issue
I tried to create another Dynamic Action to hide the P51_CHANGE_REASON and P51_CHANGE_DESC fields on page load, but when either of the date fields are changed and the validation is fired the P51_CHANGE_REASON and P51_CHANGE_DESC are hidden again.
There are two buttons to submit the page: 'SAVE' will submit the page and stay on the page and 'SAVE_CHANGES' will submit the page and branch to the previous page (which is a report with EDIT buttons to edit the record).
I can't get the page load Dynamic Action to NOT fire when the validation is fired.
I hope this is clear and if not what information can I provide?
Thanks,
Joe

Phil,
Thank you for looking at this.
Yes if the Change Reason is NULL when the edit page is displayed then the Change Reason and Change Description fields are hidden. If the Start Date (Datepicker) and/or End Date (Datepicker) change then display the Change Reason (Select List) and Change Description (Textbox). If the page is saved without entering a Change Reason display a validation error message that the Change Reason cannot be empty (NULL).
The problem I'm having is that if no Change Reason is entered and the page is saved thereby firing the validation the Change Reason and Change Description fields are hidden again (because of the On-Load Dynamic Action to hide them). So now the user can't put in a Change Reason...unless they change one of the date fields again which isn't going to be accepted.
Is there a way to determine if a validation error was fired and be able to use that on the On-Load Dynamic Action to hide the two fields? Something like...If the validation fired then don't run?
Please let me know if I'm still confusing you.
Thanks,
Joe

Help with video display!!

Hello all,
After installing the 41.09 drivers for my MSI GF4200 64mb card, I noticed that upon DVD or any video file playback, I only see about one quarter of the video, which is the upper right hand corner. I do not know if the problem started with the installation of this driver as I have not tried to view video in awhile until after installing this driver. Previously I believe I had 4072 and the original drivers in. So, I reinstalled the original drivers and I am still having the same problem. I ran my direct x diag tool and I passed all of them.
Another strange part of this is the fact that after I play with the display settings, the problem seems to be fixed. But when I close the program, and reopen the video file the problem recoccurs again.
I do not have any other video problems that I know of, but I will go run Battlefield 1942 (intense gfx) to see how I fare. If anyone has any suggestions or ideas, please share as this is really starting to bug me. Thanks for your help in advance!
twanto

Well BF1942 and 3D mark both run fine, stable, no glitches and run at the size they are supposed to. Does anyone have any suggestions? PLEASE HELP!
twanto

Search Help with Structure Display

Hi,
I want to create a search help which should display my output in the structure format base on the different levels.
I have already written a test program which display all the values in proper structure format. But I wanna do the same in the search help. It has to display the output in the structure format.
Please guide me how to achieve this.
Thanks,
Karthik

hello,
you could write additional report based on ALV tree. So you would have the stucture which you want to have and on value request call your custom program. i doubt that there is FM or class which could generate search help tree. So basically you have to write your own logic. Or you could use GuiXt tool. Example and tutorial.
http://www.synactive.com/tutor_e/lessonco00.html
br,
dez_

Help with external displays

Just installed Lion and afterward I noticed that things work differently with external displays. In the past I could have my laptop open to mirror but now it must be shut and the mirrior button or selection isn't available within the display preferences. So my question is, 1. does any one know how to better manage displays? and 2. does anyone know how to mirror while having the laptop screen open?
I know trhis sounds petty but where I work it is very hot and it seems like with the screen shut the computer syncs heat away a lot less efficiently.
Thanks

Thanks,
I now know how to turn on and off mirrioring with command/F1 (didn't know that yet), but would you know how I can use my external display in mirror mode with the laptop display completely turned off, not dimmed till black, but off?
Before lion I was able to do this by shutting the laptop screen which would put the machine into sleep mode and then by clicking the mouse or hitting a key on the keyboard it would wake it. Once the external display came on then I would open the laptop and the laptop display would remain off while using the external display. Hope that makes sense. Any suggestions?

Help with a display laptop.

So I went to best buy tonight and got a new laptop. The only one left was the display model which was ok since it was in good shape. Problem is I get home and it's in demo mode and I can't figure out how to reset it or get rid of the demo mode setting. Any help would be appreciated. Thanks.

No... Its not.
Crystal
Superuser
Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
*Remember to mark your questions solved and click the star to give kudos to show your thanks!*
While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
My opinions do not in any way shape or form represent Best Buy's Official decisions.

Help with Game Display structure and adding independant objects

I'd like to do two things and I'm not sure how to set up the code.
1) Add 1 to n enemies that think and move on their own. Basically their own threaded life I think.
2) Add 1 to n weapons fire that when the thread is finished apply the damage.
Currently I'm only using Graphics2d to draw everything to an off screen image. The issue I have is that most of the individual object stuff is wrapped up in the main game loop rather than added to the object itself.
Here is my current working pseudo code: I have this working but seems like I need to make it more flexible. Just not sure how.
public class combatDisplay extends JPanel{
@Override
protected void paintComponent(Graphics g){
     creates Graphics2d offScreenImage
     wipeClean offScreenImage
     drawPlayers 0 to n
     drawSpaceShip 0 to n --> drawMe(offScreenImage);
     drawWeaponShots 0 to n
     drawExplosions 0 to n
     draw offScreenImage to panel
public void setPlayers (ArrayList al) {}
public void setObjects (ArrayList al) {}
public void setSpaceShips (ArrayList al) {}
public void setWeaponShots (ArrayList al) {}
public void setExplosions (ArrayList al) {}
class Spaceship{
     Point location
     Polygon shape
public void drawMe (BufferedImage bf){
     draw Polygon
class WeaponShot{
     Point location
     Polygon shape
public void drawMe (BufferedImage bf){
     draw Polygon
class GameLogicLoop {
     movePlayer
     moveEnemies
     fireWeapons
        applyDamage
}It seems like I should just spawn an enemy thread that checks its own ranges and does its own movements. But I'm not sure how to get that to display the offscreen image. Can an arraylist hold a thread?
Likewise, with the weapons fire.... it should be self contained to check hit, display itself, display explosion or hit, then apply damage to its target when animation is completed. These two seem like a similar code structure I'm just not sure how to set it up yet.
Any psuedocode would be helpful.

Morgalr,
Awesome responses thanks. Normally I don't code so it is an interesting (read hard) learning curve for me. Usually I just design and hire someone smarter than me to code.
If you don't mind taking a look, I tried reworking everything toward the approach we have been discussing. If you see anything glaring and troublesome, please yell.
Ship Class is its own thread that can paint itself. Basically it is a sitting ship.
DisplayPane is the image painting class.
loopGame tells the objects when to paint and passes the image reference around.
package controller;
import java.awt.Color;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.Point;
import java.awt.Polygon;
import java.awt.image.BufferedImage;
import javax.swing.JFrame;
import javax.swing.JPanel;
public class Controller extends JFrame {
    DisplayPane pane;
    Ship satallite;
   public Controller(){
        setTitle("Controller");
        setBounds(0,0, 400, 400);
        setLayout(null); //absolute position
        setResizable(false);
        pane = new DisplayPane(getBounds().width, getBounds().height);
        add(pane);
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        setLocationRelativeTo(null);
        setVisible(true);
   class DisplayPane extends JPanel{
       BufferedImage offImage;
       public DisplayPane(int width, int height){
           offImage = new BufferedImage(width, height, BufferedImage.TYPE_INT_RGB);
           setBounds(0, 0, width, height);
       @Override
       protected void paintComponent(Graphics g){
            g.drawImage(offImage,0,0,this);
       public BufferedImage getImage(){
           return offImage;
       public void setImage(BufferedImage tempImage){
           offImage = tempImage;
       public void wipeImage(){
            Graphics2D big = offImage.createGraphics();
            big.setColor(Color.BLACK);
            big.fillRect(0, 0, getBounds().width, getBounds().height);
   class Ship implements Runnable{
       Thread thread;
       int speedStep;
       boolean bAlive = true;
       Point point = new Point(0,0);
       public Ship(String shipName, int speed){
           thread = new Thread(this, shipName);
           speedStep = speed;
           point.x = (int) ((int) 300 * Math.random());
           point.y = (int) ((int) 300 * Math.random());
       public void start(){
           thread.start();
       public void kill(){
           bAlive = false;
       public void drawShip(BufferedImage tempImage){
            Graphics2D big = tempImage.createGraphics();
            int[] pXfrigate = {point.x, point.x-4, point.x-4, point.x+4, point.x+4};
            int[] pYfrigate = {point.y, point.y+7, point.y+17, point.y+17, point.y+7};
            Polygon frigateShape = new Polygon(pXfrigate, pYfrigate, 5);
            Polygon currentShip = frigateShape;
            big.setColor(Color.GRAY);
            big.fillPolygon(currentShip);
            big.setColor(Color.RED);
            big.drawPolygon(currentShip);
       public void run() {
           int delay = 500;
           while (bAlive){
               try{
                   System.out.println(thread.getName()+" x: "+point.x+" y: "+point.y);
                   Thread.currentThread().sleep(delay);
               }catch (Exception e){}
   public void loopGame(){
        satallite = new Ship("Dot", 0);
        satallite.start();
        while (isVisible()){
            pane.wipeImage();
            satallite.drawShip(pane.getImage());
            pane.repaint();
            try{
                Thread.sleep(0);
            }catch (Exception e){}
            satallite.kill();
        System.exit(0);
   public static void main(String[] args) {
        Controller control = new Controller();
        control.loopGame();
}

Help with simple display and add in ADF/Struts app

I created a simple ADF/Struts application based on the HR schema. I have a department view object and entity object based on the Departments table. From the Struts page flow designer, I create a data page action (viewDepartments) that binded to a departments view object by dragging the departments view object as a "Read-Only" form from the palette with the navigation buttons --- this page will just display the departments. Next, I created another data page action (addDepartments) that allows a user to add a department. I did this by dragging the departments view object from the palette as an "Input Form" and then dragging the "Create" operation onto the data page action. Each data page action has its own JSP of course.
I'm noticing that every time when I go to to the "addDepartments.do" and then go to "viewDepartments.do", a blank record is added to the view object. Why is this? Also, I want the Submit button to do the "save and commit" in one step. How do I do that?
If it helps, I can email anybody the workspace file so that you can see this behavior.
Thanks.

Try following this step by step tutorial to see if it will make things better for you.
http://otn.oracle.com/obe/obe9051jdev/adftojsp/defaultendtoend.htm#t3

Need help with Podcasting...

This issue is directed to those with plenty of podcasting experience. (Also, I have the iWeb version just previous to iWeb 08, but that forum has practically died and I really need help.)
I'm a total newbie when it comes to podcasting, although I've had my website for almost a year and feel comfortable with iWeb.
Here's the issue:
I created a podcast using GarageBand3 and under the "Share" menu, I "Sent to iWeb." I put the podcast on a "Blog" page (because it had both the "Subscribe" and "RSS" buttons, and someone told me the blog and podcast pages work the same way).
I published my iWeb to a folder, and uploaded it to godaddy.com using Fetch. My URL is www.andrewhollinger.com. The page is the "podcast" page. You may need to visit the site to see what I mean because this next part gets a little confusing -- at least to me.
Everything is on the website. And the podcast works just fine if I push play from the website. When I tried to test my feed with iTunes, however, I ran into all sorts of errors because iTunes does not recognize the URL as a podcast.
When I went back to my webpage, I pushed both the "Subscribe" and "RSS" buttons to see what would happen. The link says "This page does not exist" and says the URL is www.andrewhollinger.com/andrewhollinger.com/Podcast/rss.xml. It doubled the main URL.
I'm really hoping someone with more expertise can walk me through where I went wrong, and how to fix it so that my podcasts can be seen by iTunes so that I can submit it to the iTS.
Thanks in advance.
Andrew Hollinger

Enter this feed in iTunes for podcsat submission.
feed://www.andrewhollinger.com/Podcast/rss.xml

Help with Podcast display in iTs

Similar Messages

Maybe you are looking for