Help with port forwarding for the WRT54G

I need assistance please!
I am having issues trying to setup port forwarding for a ftp. I already have set this up for a SQL Server port and it works remotely. When I setup another rule for ftp using port range 20-21 it does not work.
I have confirmed that I have saved my settings, have the correct IP address, etc. I have firmware version 4.21.1 and not sure how to troubleshoot this. Any help would be great.
Thanks,
John

Yes you do need to have the port already forwarded for port 20~21 with both TCP/IP and UDP enabled unless you know for sure your ftp only uses just one of them. That is why I asked what port your SGL was set to. Follow the link that other guy posted and open port 20 and 21 (I only use 21 with no problems) and make sure it is directed to the IP of the ftp host. Also that PC needs to have the FTP enabled in windows. To do that go to your control panel > add/remove software > and on the left side go to add/remove windows components. Then check the box for the ftp and add it. It should ask for your windows CD do have it handy when you add the ftp component to your PC.
Richard Aichner (Ikester)

Similar Messages

Problems with Port Forwarding for RDP in WebVPN

Hi,
I'm hoping somebody can help me solve this problem that's been bugging for weeks. We recently implemented a double-layer firewall architecture. Before that, our users can access RDP via port forwarding on WebVPN or the Cisco VPN client without any problems.
After we implemented the double-layer firewall architecture, users who are going through the WebVPN and port forwarding for RDP began to experience frequent disconnections, slowness or freezing connections. The users who are using the client are fine.
I checked the logs and I'm getting repetitive TCP-O for the port forwarding connections for RDP. Additional information: the FW we installed as a 2nd layer is Netscreen. I've already set the policy on it to Any-Any for the meantime to help in troubleshooting but to no avail.
I hope somebody can help me in sorting this out as I'm kind of confused on the difference between the port-forwarding for RDP via the WebVPN and the normal RDP via the client.

Hi,
I didnt see anything marked with red in the above? (Atleast when I was reading)
I have not really had to deal with Routers at all since we all access control and NAT with firewalls.
But to me it seems you have allowed the traffic to the actual IP address of the internal server rather than the public IP NAT IP address which in this case seems to be configured to use your FastEthernet4 interfaces public IP address.
There also seems to be a Static NAT configured for the same internal host so I am wondering why the Static PAT (Port Forward) is used?
- Jouni

Port forwarding for the rest of us?

Hi all,
I've been reading this forum for a couple of weeks now trying to find a way to get two Macs to do iChat video.
1st setup is a G5 MP2.0, 10.4.7, iChat 3.1.5, iSight, Belkin 8230-4 router.
2nd setup is iMac intel 20", 10.4.7, iChat 3.1.X, builtin camera, Airport Extreme router.
Both are on 1.5+ broadband, Belkin has a static IP coming into the router, with the G5 connected using DHCP with manual address. Airport has cable modem DHCP in, with DHCP/NAT turned on. Apple firewall is OFF on both.
Initial tries yielded the dreaded -8 error. I reset Quicktime streaming, iChat bandwidth prefs as suggested and tried forwarding ports on both setups, per the portforward.com recs for iChat.
The Intel iMac is now able to see/hear the ads on the auto chat test from appleu3test01 just fine, but we're still getting -8 when trying to connect to the G5/Belkin.
Besides the six initial ports for iChat (portforward.com) have now tried a shotgun approach by adding ports suggested from various sites/forums. This setup has achieved at least an error free connection with the auto testers, however the intermittent blocky video and choppy sound is not much better. Screen grab of blocky video with the 20 forwards currently set on the Belkin.
http://www.hamishthewelshie.com/ports.jpg
I'm looking for help sorting this mess out. What am I doing wrong here?
Thanks in advance for any help.
PMcK
P.S. I was going to post my first ever anti-apple rant... if only just to feel better but, what's that? oh okay...
<rant> Dear Steve, Even tho I have been using Macs since the 512, I am one of those artsy fartsy Mac users who doesn't really want to know what is under the hood. Admittedly, I am newbie at all this router port stuff, but the fact that lots of people seem to be having this same problem is ridiculous IMHO. Even the Yahoo and Skype Beta video ran the first time we tried it, not great quality, but it was a no brainer setup and it just works... exactly what we've come to expect from Apple. If these johnny come latelys can do it this simply, why can't my fruitbox company of choice get their own ***** sorted out? </rant> Sorry Steve.
G5-2.0MP Mac OS X (10.4.7)

Hi PMck,
This device can do Port Triggering even if it can not do UPnP.
At present the Port Forward site list their own PC app to help.
The method though is here
Ignor the pics and info on the brown and orange pics.
Set the first trigger as port 5678 on UDP.
Set these ports in the next text field
5060,5678,16384-16403 (no spaces and only commas and dashes inbetween) Set the protocol for these as UDP as well
Set a new line for trigger 5190 on TCP
Set the next text field as just 5190 and TCP again
Repeat the line above but for UDP at both points
If using Jabber at all:
Set a trigger of 5222 on TCP and ports 5220,5222 on TCP
(if using GoogleTalk make that 5223 on TCP and list 5220,5222,5223 on TCP)
Bonjour needs four single lines (trigger and just one port in the list field)
5297 on UDP 5297 on UDP
5298 on UDP 5298 on UDP
Repeat for TCP for 5298
5353 on UDP 5353 on UDP
As this is a NAT method of opening the ports the Airport will need "Distributing Addressing" turned Off in the Aipor Admin Utlity > Network tab This will make the Airport just an access point and the Belkin will address the whole Lan then.
Thios will allow multiple copmuters to access the same ports for iChat at the same time. The Belkin can be left doing DHCP. (Or be set to Static to the LAN)
Turning Off DHCP in the Airport (Distributing Addresses) will avoid any Double NAT and Double DHCP that seems to be going on at the moment.
10:12 PM Tuesday; August 1, 2006

Help with port forwarding to application

Help needed to Port Forward on to my PS3.
I need to forward the following ports:
UDP: 3074; 3659; 6000
TCP: 80; 443; 3659; 10000 - 10099; 42127
Have previously given the PS3 a static IP, set the port forwarding rules and then forwarded to the IP address, but it appears the ports have not opened as expected.
Help Keith

I can only see one image which just shows the application mapping, but no indication as to whether you had clicked the "apply" button.
Why are you forwarding ports 80 and 443, are you running a webserver on the PS3, as those ports are used for web serving.
As a matter of interest, your port 80 is showing as open at the moment, so is the PS3 turned on, or is port 80 mapped to something else instead?
What I would like you to do is to start from the beginning, with just the single TCP port number 3659 assigned to the PS3.
It will mean removing the other assignments, but it will make things a bit easier.
If you could do that please, and then we can do some tests.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Urgent help with Port Forwarding?

Hi all!
I hope my posting in the right section.
Basically I have a DVR in my home. I want to be able to view the 1 camera that I have externally (from a different home)
I have managed to be able to view the camera internally on my network (the dvr is plugged into the BT HUB 3)
I did this by Advanced Settings>Port Forwarding>Supported Apps>
I was told by the Manifacturer of the DVR that the ports i needed to forward are 8234 to 8239
Does this look correct to you guys?
The DVR i have a is a Digital Sprite 2 PLUS. Ive turned the firewall off on the router settings as I thought that could be the problem. I can view the dvr internally as I said above using the DVR i.p 192.168.1.69 perfectly, but when I type in my external i.p via my other home it wont connect at all.
Could anybody help me as to what im doing wrong?
Thanks for any replys !
James.

You are replying to an old posting.
The information on this link may help you.
Port forwarding problems
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Help with port forwarding ASA5505 v8.2

Hi,
Having an issue doing a port translation on an ASA5505 for RDP.
I have a /29 allocated by ISP and when I port forward the address assigned to the outside interface RDP works perfectly, however when I try to use another IP within the /29 range, I get nothing.
I am only new to ASA so please forgive if this is something obvious...
Relevant config is:
interface Vlan1
nameif inside
security-level 100
ip address 10.1.12.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address X.X.X.217 255.255.255.248
access-list OUTSIDE-IN extended permit tcp any host X.X.X.218 eq 3389
static (inside,outside) X.X.X.218 10.1.12.10 netmask 255.255.255.255 sh run acces
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
access-group OUTSIDE-IN in interface outside
When I used the outside IP address and it worked perfectly, config difference was only
access-list OUTSIDE-IN extended permit tcp any host X.X.X.217 eq 3389
static (inside,outside) tcp X.X.X.217 3389 10.1.12.10 3389 netmask 255.255.255.255
Any help would be greatly appreciated

Hey Jouni,
Packet capture gave me this output which didnt have any TCP 3389... but had some random UDP ports only?
   1: 21:54:55.108377 802.1Q vlan#2 P0 X.X.X.218.63420 > 208.67.222.222.53: udp 44
   2: 21:54:58.751929 802.1Q vlan#2 P0 X.X.X.218.63420 > 208.67.220.220.53: udp 44
   3: 21:54:59.492238 802.1Q vlan#2 P0 X.X.X.218.63976 > 208.67.222.222.53: udp 45
   4: 21:55:02.807468 802.1Q vlan#2 P0 X.X.X.218.63207 > 216.239.34.10.53: udp 55
   5: 21:55:02.807651 802.1Q vlan#2 P0 X.X.X.218.63976 > 208.67.220.220.53: udp 45
   6: 21:55:06.863495 802.1Q vlan#2 P0 X.X.X.218.63414 > 199.253.183.183.53: udp 56
   7: 21:55:24.599563 802.1Q vlan#2 P0 X.X.X.218.65039 > 208.67.222.222.53: udp 42
Config is below:
ASA Version 8.2(5)
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport access vlan 3
interface Ethernet0/2
description TO LAN
interface Ethernet0/3
description TO LAN
interface Ethernet0/4
description TO LAN
interface Ethernet0/5
description TO LAN
interface Ethernet0/6
description TO LAN
interface Ethernet0/7
description TO LAN
interface Vlan1
description TO LAN
nameif inside
security-level 100
ip address 10.1.12.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address X.X.X.217 255.255.255.248
interface Vlan3
shutdown
no forward interface Vlan2
nameif backup
security-level 0
ip address X.X.X.42 255.255.255.252
ftp mode passive
dns server-group DefaultDNS
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group icmp-type ICMP
description ICMP types permitted
icmp-object echo
icmp-object echo-reply
icmp-object unreachable
icmp-object time-exceeded
access-list OUTSIDE-IN remark TRAFFIC PERMITTED TO ENTER THE OUTSIDE INTERFACE
access-list OUTSIDE-IN extended permit tcp any host X.X.X.218 eq 3389
access-list OUTSIDE-IN extended permit icmp any interface outside object-group ICMP
access-list INSIDE-IN remark INSIDE ACCESS
access-list INSIDE-IN extended permit tcp any any
access-list INSIDE-IN extended permit ip any any
access-list INSIDE-IN extended permit icmp any any
access-list BACKUP-IN remark TRAFFIC PERMITTED TO ENTER THE BACKUP INTERFACE
access-list BACKUP-IN extended permit icmp any interface backup object-group ICMP
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu backup 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
global (backup) 1 interface
nat (inside) 0 access-list NO-NAT
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) X.X.X.218 10.1.12.10 netmask 255.255.255.255
access-group INSIDE-IN in interface inside
access-group OUTSIDE-IN in interface outside
access-group BACKUP-IN in interface backup
route outside 0.0.0.0 0.0.0.0 X.X.X.222 1 track 1
route backup 0.0.0.0 0.0.0.0 X.X.X.41 254
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sla monitor 1
type echo protocol ipIcmpEcho X.X.X.X interface outside
num-packets 3
frequency 10
sla monitor schedule 1 life forever start-time now
track 1 rtr 1 reachability
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect icmp

Help with Port forwarding issue...

I have a new extreme base station at work currently opening a port # to a imac running a business app. Works fine, BUT I need to open another port # pointing to the exact same imac for using another related program. I opened airport utility did the exact same procedure as the working port but I can't seem to open any new #'s?? Any way to type in "Test port numbers" and check with portscan? I tried a few numbers and Nothing. The only one that comes back open is that one working port #. Nothing is blocked in sharing on the pointed iMac. Called my isp and they said they're not blocking anything. Tried power reset on the exteme and the iMac. No change. ANY help would be MUCH appreciated!! Thanks in Advance...

Here's an example of two such setups on my AEBS:
Notice that each service has its own ports but both point to the same machine IP address. Try using the machine's IP address assigned in Network preferences.

Need help with port forwarding an Avtech DVR

For some reason I can't get my Avtech DVR to work on my android phone on Avtech's Eagle Eyes app.
The camera/dvr comes up on wifi, but not on 4g. I am trying to get the port forwarding to work, but its not working. It says the ip address is not accesible.
The port for the dvr is 80. This is what I have. I thought it was correct?
I have a Westell 9100EM router.
Solved!
Go to Solution.

Thought I'd post an update to this. I fixed it. I had to change ports on my dvr.

Need Help with instr/Regexp for the query

Hi Oracle Folks
I am using Oracle
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
I have some student responses and the valid values are +/-/O(alphabet)/P and spaces at the end of the sting only not in the middle.
As per my requirement the record number 2 3,4 should be listed from the query but I am getting only one (record 3).
Can we use REG_EXP
Please help.
Thanks in advance.
Rajesh
with x as (
SELECT '+-+-POPPPPPP   ' STUDENT_RESPONSE, 1 record_number FROM DUAL union all
SELECT '+--AOPPPPPP++' STUDENT_RESPONSE, 2 record_number FROM DUAL union all
SELECT '+-+- OPPPPPP--' STUDENT_RESPONSE, 3 record_number FROM DUAL union all
SELECT '+-+-9OPPPPPP   ' STUDENT_RESPONSE, 4 record_number FROM DUAL )
(SELECT RECORD_NUMBER,
TRIM(STUDENT_RESPONSE) FROM X
WHERE
((INSTR (UPPER(TRIM(STUDENT_RESPONSE)),'-') =0)
OR (INSTR (UPPER(TRIM(STUDENT_RESPONSE)),'+') =0)
OR (INSTR (UPPER(TRIM(STUDENT_RESPONSE)),'O') =0)
OR (INSTR (UPPER(TRIM(STUDENT_RESPONSE)),'P') =0)
OR (INSTR (UPPER(TRIM(STUDENT_RESPONSE)),' ') !=0)
)

Hi, Rajesh,
Rb2000rb65 wrote:
Hi Oracle Folks
I am using Oracle
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsThanks for posting this (and the WITH clause for the sample data). That's very helpful.
I have some student responses and the valid values are +/-/O(alphabet)/P and spaces at the end of the sting only not in the middle.Are you combining the responses to several qeustions in one VARCHAR2 column? It might be better to have a separate row for each question.
As per my requirement the record number 2 3,4 should be listed from the query but I am getting only one (record 3). What exactly is your requirement? Are you trying to find the rows where student_response contains any of the forbidden characters, or where it contains a space anywhere but at the end of the string?
Can we use REG_EXPYes, but it's easy enough, and probably more efficient, to not use regular expressions in this case:
Here's one way:
SELECT     record_number
,     student_response
FROM     x
WHERE     TRANSLATE ( UPPER ( RTRIM (student_response, ' '))
            , 'X+-OP'
            , 'X'
            )     IS NOT NULL
;That is, once you remove trailing spaces and all occurrences of '+', '-', 'O' or 'P', then only the forbidden characters are left, and you want to select the row if there are any of those.
If you really, really want to use a regular expression:
SELECT     record_number
,     student_response
FROM     x
WHERE     REGEXP_LIKE ( RTRIM (student_response)
              , '[^-+OP]'          -- or '[^+OP-]', but not '[^+-OP]'. Discuss amongst yourselves
              , 'i'
;but, I repeat, this will probably be slower than the first solution, using TRANSLATE.
Edited by: Frank Kulash on Oct 17, 2011 1:05 PM
Edited by: Frank Kulash on Oct 17, 2011 1:41 PM
The following is slightly simpler than TRANSLATE:
SELECT     record_number
,     student_response
FROM     x
WHERE     RTRIM ( UPPER ( RTRIM (student_response, ' '))
           , '+-OP'
           )          IS NOT NULL
;

Help with transparent background for the pop up menu!

Hello everyone,
I am working on a Web site which has a pop up menu created in Dreamweaver 8. The pop up is over a picture and I'm thinking about to make its background transparent. I'm not really a programmer to be able to do it manually but I'm familiar with JS. Would anybody be able to help me with this? I truly appreciate it.
I could find the code but don't know where to place it! The JS file is about 700 lines!!! I'm so confused...Below is the source file for the JS that you could download...
http://www.arxcustomhomes.com/mm_menu.js
Thanks so much.
Mojan

Sure.
http://www.arxcustomhomes.com
Thanks a lot.
Mojan

Help with pulling records for the last 24 hours

Post Author: kbrinton
CA Forum: Formula
Hi,
I don't know what is wrong with me but I can not figure out how to get Crystal to pull records for the last 24 hours. I have a date field I can key off of but I can not figure out the formula or correct syntax to put in the Selection formula. Any help would be great!! Thanks

Post Author: SKodidine
CA Forum: Formula
No need to create any formula. In your record selection criteria type:
{table.date} in dateadd("h",-24,currentdatetime) to currentdatetime
If you just want the prior 24hrs and do not care about the time then replace 'currentdatetime' with 'currentdate'.
(currentdatetime - 24) will give you 24 days before and not 24 hours.

Help with port forwarding

i am running a web and mail server from my home computer. i have port 25 and port 80 set to forward traffic to my webserver. port 80 works ok, but according to the linksys log, the linksys router is blocking port 25. My isp is not blocking any ports, and i can send mail from my mail server. how can I get the linksys router to stop blocking incoming port 25? my router setup is: linksys befw11s4 port forwarding: 80 to 80 25 to 25 upnp is enabled upnp forward smtp 25 tcp to port 25 192.168.X.X dmz is enabled for the server's ip.

wiles wrote:
i am running a web and mail server from my home computer. i have port 25 and port 80 set to forward traffic to my webserver. port 80 works ok, but according to the linksys log, the linksys router is blocking port 25. My isp is not blocking any ports, and i can send mail from my mail server. how can I get the linksys router to stop blocking incoming port 25? my router setup is: linksys befw11s4 port forwarding: 80 to 80 25 to 25 upnp is enabled upnp forward smtp 25 tcp to port 25 192.168.X.X dmz is enabled for the server's ip.
First off, DISABLE the dmz!! That opens ALL ports to your pc, you dont want that.
Second, because you had the pc in the dmz tells me that the router is not blocking port 25, again, in the dmz all ports are open.
Disable upnp, it will just cause problems and you arent using it anyway.
Go to :
https://www.grc.com/x/ne.dll?bh0bkyd2
Click proceed, enter 25 in the box in the middle, then click user specified custom probe.
Does it show as stealth?

Need help with installing Windows for the bar exam

I need to retake the bar exam in Feb 2011 and I've decided to switch to typing. I am trying to figure out what Windows I need (the software says XP is fine but is that even available anymore)- so can someone walk me through this process? I've partioned my hard drive with the default 5GB but should it be more?
I'm looking at buying Windows- is XP okay or should I shell out for 7-i.e. is one more compatible with Macs?
And then finally, in the installation instructions they mention that I need my Mac OS disc for the process- is that the snow leopard disc or something else? My discs are in storage right now so should I wait until I get them before starting this process or can I get replacements if I accidentally threw them out in moving?
Sorry for all the questions, but well, I'm racing to get everything done and I want to make sure I don't crash my system halfway through the exam!

You don't need Boot Camp, but even XP will have a lot of stuff to update from after the install, and that takes temp space. Just as your Mac shows 5-10GB there is add'l hidden space used.
Apple's 'requirements' has gotten others in trouble and I was pretty sure it was more like 10GB. Plus a lot of XP discs are now SP3.
XP out of the box but connected to the net is just waiting for malware, average is 15 minutes to be infected. 7 is better and just in case you need it again.
System Builder can come in 32 or 64-bit but XP is 32-bit only.
VirtualBox by Oracle is a free VM.
1GB for one program actually seems like a lot, or is that RAM requirement?

Port forwarding for the Web server for outside Internet (not working , help!!!!!!)

Hello
I am trying to learn something new here. We have web server inside our organization its IP address is 172.16.0.35. We want outside Internet users to access web server, How is it possible? Please have a look at the running configuration. Web server is working inside the organization but not at outside. Our Static Public IP is 197.255.232.15 it is assigned to Inetrface Gigabit ATM0.1 and ISP default GW is 197.255.232.1. Let me know whats next? How do I make web server inside the organization available for outside Internet users. Thank you.
Building configuration.
Current configuration : 1983 bytes
! Last configuration change at 17:57:15 UTC Sat Jan 24 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router_test
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool test
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
ip access-group netin in
ip access-group netout out
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
atm route-bridged ip
bridge-group 1
bridge-group 1 spanning-disabled
pvc 0/35
encapsulation aal5snap
protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description Lan
ip address 172.16.0.34 255.255.255.224
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1454
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
login
transport input all
end
http://pastie.org/9858814

Hi Karsten Iwen
I deleted ( ip access-group netin in and ip access-group netout out) but it still does not work
my config :
Building configuration...
Current configuration : 2267 bytes
! Last configuration change at 15:43:06 UTC Wed Jan 28 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool my
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
no ip virtual-reassembly in
atm route-bridged ip
pvc 0/35
encapsulation aal5snap
no protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description
ip address 172.16.0.34 255.255.255.224
ip nat inside
no ip virtual-reassembly in
ip tcp adjust-mss 1414
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
end
Router#sh ip nat translations
Pro Inside global Inside local Outside local Outside global
tcp 197.255.232.15:5183 172.16.0.33:5183 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5196 172.16.0.33:5196 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5602 172.16.0.33:5602 174.129.246.27:80 174.129.246.27:80
tcp 197.255.232.15:5785 172.16.0.33:5785 31.13.93.3:443 31.13.93.3:443
tcp 197.255.232.15:443 172.16.0.35:443 --- ---

Help with downloading Ringtones for the 8830

Went to Verizon, couldn't download my ringtones.
Went to the User's Manual, told me to click on media, all ring tones, press menu button, then download tunes... problem is, there is no download tunes menu item.
Any help somebody could give me would be greatly appreciated.
Doug
Chandler, Arizona
www.TheDirtDealers.com

Verizon is noted for blocking a number of standard features in the handheld OS. I verified the steps you gave as correct on my BB, but I have a different carrier. Suspect you may need to take it up with Verizon, or, if this is a company issued device, they may have requested Verizon to block it.
You can also download tunes by browsing to a website that offers sound clips. When you click on the link it should offer to save it as a ringtone for you. Try www.freeringtones.com, but any site that offers short .mp3 or .mid clips should work.
posted by DigitalFrog
WARNING: May contain traces of nuts.

Help with port forwarding for the WRT54G

Similar Messages

Maybe you are looking for