Help with portforwarding, how do set a range with the M1424-WR Rev.F?

Am trying to portforward Call of Duty: Black ops 2, and it's giving me a headache. Portforward.com says the REV.f won't forward ports, I can only DMZ( which I obviously won't do), so I'm following the M1424-WR instructions(http://portforward.com/english/routers/port_forwarding/Actiontec/MI-424-WR/Call_of_Duty_-_Black_Ops_...
Since I only have an input box( the instructions for the different model gives two input boxes to set range) I simply copy pasted " 4379-4380", am unsure if it recognizes it as a range.

heizenbrg wrote:
Am trying to portforward Call of Duty: Black ops 2, and it's giving me a headache. Portforward.com says the REV.f won't forward ports, I can only DMZ( which I obviously won't do), so I'm following the M1424-WR instructions(http://portforward.com/english/routers/port_forwarding/Actiontec/MI-424-WR/Call_of_Duty_-_Black_Ops_...
Since I only have an input box( the instructions for the different model gives two input boxes to set range) I simply copy pasted " 4379-4380", am unsure if it recognizes it as a range.
Why not just put in 2 port forwarding rules? one for 4379 and the second for 4380. just make them a user defined protocol.
I saw the comment at portforwarding.com - sounds ridiculous to me - The MI424-WR_Rev.F will not allow you to forward enough ports, to run Call of Duty - Black Ops II
Even if they don't allow a range there can't be a reason they don't allow a seperate rule for each port.
Here's the link to the user manual for the router
http://support.actiontec.com/doc_files/MI424WR_Rev._E&F_User_Manual_20.10.7_v1_GPL.pdf
you need section 6.4 pretty useless manual too

Similar Messages

How to set up SAPconnect with email server

Hi,
Does any one know how to set up SAPconnect with email server
We are using workflow and when it fails it we are sending the notification mail to the user on his company mail id, i.e. [email protected]
This is working in the current production system. We are doing the new development which will replace the current production system. The existing Basis team does not know how it was setup in production system and how to set it up in the new system.
When we send any mail notification from workflow we can see the mail in SCOT transaction but it is not received at the specified mail address.
Can any one provide the configuration steps or any document for this.
Thanks in advance..
Pratik

Hi Pratik,
Check the following link:-
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
http://help.sap.com/saphelp_nw04/helpdata/en/2b/d925bf4b8a11d1894c0000e8323c4f/frameset.htm
these link will help u to config SMTP.
And one more thing u have to do..
Go to SE11 n open Table sxnodes in change mode.
And change F_ESMTP field to false i.e. BLANK for the Field NODE = SMTP.
Hope this will work For U.
Regards
Sachin Dhingra

HT3546 So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou! :)

So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou!

Welcome!
Last question first, as we need to know what operating system that the Mac is using.
If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac, and post back with the OS X Version number that you see there.
Two possible solutions on the power cord
ORIGINAL OEM APPLE AIRPORT EXTREME BASE STATION POWER SUPPLY AC ADAPTER A1202 if you want a white power supply and white power cord to match up with the Apple device
AC adapter for Apple AirPort A1034 Extreme B... if you don't care what color the supply and cord might be
If you don't already have a Setup Guide.....look here:
AirPort Extreme Base Station Setup Guide v4.2 (Manual)

How to set this filters with 'or' relationship

Hi Pros,
 I have a query as follows, rows and columns are all in structures.
 regular_employees
 active_employees
 lay_off_employees
 I want to set up filter as ' employ_status = 0 or employ_subgroup =2' for this query, please tell me how to set this filters with 'or' relationship.

Hi Yifei,
Create a formula and enter this (let's name this FORMULA_KF):
((EMPLOY_STATUS = 0) OR (EMPLOY_SUBGROUP = 2)) * enter value IF_TRUE + enter value IF_FALSE
Then create the condition to HIDE the rows having those values to be filtered (if this is your purpose)..
Like,
FORMULA_KF <> 1
Is this what you want mate?
Regards,
Loed

How to set task description with paragraphs at runtime

Hi Experts, How to set task description with paragraphs at runtime. Now, i can set single content in task description.however, not sure, how to set content which have paragraphs.

Hi,
You can use HTML tags in the Task descritption.
Open the task not the workflow and there you can provide
 content/containers </>
You can use even - Underlined text.
<h> for bold text
Thanks,
Sarayoodharan.K

Question: How to assign number ranges to the Official Excise Document Numbe

Question: How to assign number ranges to the Official Excise Document Number
Field name is: EXNUM, table name: J_1IEXCHDR
SAP CIN
Dear expert,
I will briefly explain the scenario:
I have created return po.
Process MIGO w.r.t. return PO- Material document generated.
Process: J1IS - excise invoice other movement create.
--> Now I want to print the document --> I m trying with T-code J1IP --> entered all the required data --. Used out put type - J1I0
But I am not getting the list of document for printing and even print is not coming.
There is no print document getting for a printing.
When I checked in an above said table (mentioned in question), I found that for transaction type OTHR, there is no number ranges defined for official document no.
And because of this reason I m not getting any document in the print.
Can you Pl extend Ur help and Pl suggest me where (path or transaction) the number ranges can be maintained for the official excise document No.
Thanking you all n advance and expecting your earliest response.
Regards
om

Dear Friend,
J_1IEXCHDR this table stores the all the excise documents created while excise transactions are done ,
for that Goto j1i9 or SNRO in these transaction you maintiane the number ranges for the
J_1IPLA2     PLA part II number range object
J_1IRG1     RG1 Number range object
J_1IRG1_T     No. Range for RG1 - Excise group / Material
J_1IRG23A1     RG23A part 1 no. range object
J_1IRG23A2     RG23A part II number range object
J_1IRG23C1     RG23C part I number range object
J_1IRG23C2     RG23C part II number range object
J_1IRG23D     Folio Numbers for RG 23D
like these lot of objects are there for them u maintiane the no. ranges
Regards
Pramod

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place. Tks

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks.
laci

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How to set a song in the playlist to be phone ringtone

how to set my song in the playlist to be my ringtone

you have to convert it to a ringtone first. searching google will give you many ways to do it. also, there are some ringtone apps with pros and cons to each one. you cannot just pick a song on your phone and make it a ringtone unfourtunately.

How to set a cookie in the browser from an html page called via an Iview

How to set a cookie in the browser from an html page called via an Iview
Hello all,
I have an issue which is causing problems. I have a snap survey (html form with submit and cookie setting) which is embedded in a url iview.
Although the submit and the form work fine, the portal will not allow the cookie to be set it seems.
Is there a way to allow cookies to be set from an embedded page in a url iview??
You will make my day if you know!
System: EP7 SP13
Kind regards
Alex

Hi,
Check this:
http://www.oracle.com/technology/products/ias/portal/html/same_cookie_domain_with_pdkv2.html
Cookie Basics
Web browsers have built in rules for receiving and sending cookies. When a browser makes a request to a web server and the web server returns cookies with the response, the browser will only accept a cookie if the domain associated with the cookie matches that of the original request. Similarly, when a browser makes a subsequent request, it will only send those cookies whose domain matches that of the target web server.
These rules are designed to ensure that information encoded in cookies is only "seen" by the web server(s) that the originator of the cookie intended. These rules also ensure that the cookie cannot be corrupted or imitated by another server. By default, the domain associated with a cookie exactly matches that of the server that created it. However, it is possible to modify the domain at the time the cookie is created. Relaxing the cookie domain increases the scope of the cookie's visibility making it available to a wider "audience" of web servers.
For example, if a cookie is created by a.us.oracle.com, it's domain will usually be set to a.us.oracle.com. This means that the browser will only send the cookie to a.us.oracle.com. It will never send it to any other servers. However, if at the time of creation, the domain of the cookie is set to .us.oracle.com, the browser will send the cookie to any server whose domain falls within .us.oracle.com. such as portal.us.oracle.com, provider.us.oracle.com, app.us.oracle.com etc
Regards,
Praveen Gudapati

How to set Where clause in the View Object of the MessageChoice ?

Hi,
How to set Where clause in the View Object of the
MessageChoice ?
Example:
<bc4j:rootAppModuleDef name="EdEscolaCampusView1AppModule"
definition="ed00050.Ed00050Module"
releaseMode="stateful" >
<bc4j:viewObjectDef name="EdEscolaCampusView1" >
<bc4j:rowDef name="CreateEdEscolaCampusView1" autoCreate="true" >
<bc4j:propertyKey name="key" />
</bc4j:rowDef>
</bc4j:viewObjectDef>
<bc4j:viewObjectDef name="ListaTipLocalView1"
rangeSize="9999">
</bc4j:viewObjectDef>
</bc4j:rootAppModuleDef>
</bc4j:registryDef>
messageChoice declaration:
<bc4j:messageChoice name="SeqTipoLocalCampus"
attrName="SeqTipoLocalCampus"
prompt="Local do Campus">
<contents>
<bc4j:optionList attrName="SeqTipoBasico"
textAttrName="NomTipoBasico"
voName="ListaTipLocalView1"/>
</contents>
</bc4j:messageChoice>
I would like set where clause of ViewObject, with dinamic parameters (using attribute1 = :1), before populate messageChoice.
thanks...
Danilo

Hi Andy,
I try set a where clause using the message:
Set where Clause parameter using UIX , but my UIX Page have 2 messageChoice's of different ViewObject's, then I need implement this Java Class:
//Nome da Package da Tela Detail
package br.com.siadem.siaed.ed00050;
// Importa as Bibliotecas necessárias
import oracle.jbo.ViewObject;
import oracle.jbo.ApplicationModule;
import oracle.jbo.client.Configuration;
import oracle.cabo.servlet.BajaContext;
import oracle.cabo.servlet.Page;
import oracle.cabo.servlet.event.PageEvent;
import oracle.cabo.servlet.event.EventResult;
import oracle.cabo.data.jbo.servlet.bind.*;
import oracle.cabo.ui.data.BoundValue;
import oracle.cabo.ui.data.DataBoundValue;
import javax.servlet.http.HttpServletRequest;
import br.com.siadem.siaed.util.*;
import javax.servlet.http.Cookie;
import oracle.cabo.data.jbo.def.NestedAppModuleDef;
import oracle.cabo.data.jbo.def.ViewObjectDef;
import oracle.cabo.data.jbo.def.AppModuleDef;
// Classe que configura os parametros para a execução da Query,
// utilizando variáveis de Sessao
public class FunPreQueryLista
public static EventResult FunConfiguraQuery(BajaContext context, Page page, PageEvent event) throws Throwable
// TrataDadosSessao - Classe utilizada para retornar os valores das variáveis de sessão genéricas
// Ex: CodCliente, CodMunicipio etc...
TrataDadosSessao varDadosSessao = new TrataDadosSessao();
// 1o. Parametro Configurado - Através da classe TrataDadosSessao, utilizando um método Get
// <alterar>
String valor1 = varDadosSessao.getCodCliente();
String valor2 = varDadosSessao.getCodMunicipio();
//Cria o objeto que retorna o ApplicationModule
ApplicationModule am = ServletBindingUtils.getApplicationModule(context);
// Início das Configurações da Query da Lista
//Cria o objeto que retorna o view object da lista desejada
//alterar
ViewObject TipoLocal = am.findViewObject("ListaTipoLocalView1");
//Configuração dos parametros definidos na query do view Object
//alterar
TipoLocal.setWhereClauseParam(0,valor1);
TipoLocal.setWhereClauseParam(1,valor2);
// Executa a Query
TipoLocal.executeQuery();
// Fim das Configurações da Query da Lista
// Início das Configurações da Query da Lista
//Cria o objeto que retorna o view object da lista desejada
//alterar
ViewObject TipoDestLixo = am.findViewObject("ListaDestinoLixoView1");
//Configuração dos parametros definidos na query do view Object
//alterar
TipoDestLixo.setWhereClauseParam(0,valor1);
TipoDestLixo.setWhereClauseParam(1,valor2);
// Executa a Query
TipoDestLixo.executeQuery();
// Fim das Configurações da Query da Lista
// Retorna o Resultado para a Página
return new EventResult(page);
The code works very well...
And, I'm sorry for my two repost's in UIX Forum about this in a few time.
Thank very much...
Danilo

How to set default values on the screen painter parameters?

Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.

Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
reward points if useful.
regards,
Vinod Samuel.

C How to Set Isolation Level in the Connection String

How to Set Isolation Level in the Connection String using the "Microsoft OLE DB Provider for DB2 Version 4.0"?
We are trying to move from Crystal Reporting that run against a IBM DB2 database on a mainfram to SSRS reporting and we have downloaded the "Microsoft OLE DB Provider for DB2 Version 4.0" and then worked with the DB2 Administrator to create the
Packages. We only have access to use the "Read Uncommitted ("MSUR001") package. We were able to connect and pull data before he removed access to the other packages, but after setting access the Connection keeps trying to use
the 'Cursor Stability (MSCS001)" package. How do we change the Default to the "Read Uncommitted ("MSUR001") package??? Since it is keeps defaulting to the the other package
we can't connect to do it in the T-SQL query, it has to be set at the Connection String level.

Hi Dannyboy1263,
According to your description, you want to set the Transaction Isolation Level in Connection String. Right?
In Reporting Services, the Connection String for OLE DB Connection can only contains Provider, Data Source and Initial Catalog. There's no property for setting Transaction Isolation Level in the Connection String. Based on my knowledge, we can
only set the Transaction Isolation Level at Query level or set it by using code (C#, VB, Java...) to call the property of Connection. So unfortunately your requirement can't be achieved currently.
Reference:
OLE DB Connection Type (SSRS)
Data Connections, Data Sources, and Connection Strings in Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to set Password change in the WAD Browser

Hello All
Before dropping my question i will explain you what was the Real scenario, i am using WAD 3.50 Version and server is BW 3.0B.we are not using portal, and Enduser will view the reports in the browser through the WAD execute Http link.
Question.
whenever the enduser uses Http link of web template in the browser, he will connect through VPN and they can able view the reports. the question is *Some system Enduser won't have SAPGUI in their system so they wants to change the password because they won't know even if it is expire.
Please Help me how to set Change Password in the browser for the WAD Application*.

To do this you will have to use either make use of portal or BSP application or Dynpro..
It is not possible for the user to change the password just from the web query

I download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.

i download autocad 2010 with crack, how can i install it with crack coz i can't find where to paste the crack file? not like windows just go to drive c, progarms and click the installed folder and you can copy and paste the crack file.
please help me..
thanks

No one here will help you.
You should definitely ask your question in this forum:
http://forums.autodesk.com/t5/AutoCAD-2010/bd-p/360

How to set white spaces between the fields in dataset??

Hi all,
I am writing a set on information to from infotypes to a text file. Its a fixed width file. How do set white spaces in the fields for dataset?
Example:
TYPES: begin of header,
                filler(40) type c,
                id(3)        type c,
                filler2(7) type c,
                delimiter type c,
             end of header.
DATA header type header.
header-filler1 = ' '.
header-id       = '100'.
header-filler2 = ' '.
header-delimiter = cl_abap_char_utilities=>newline.   ( do it to get a new line)
my_table = header.
append my_table.
DATA: out_file(256) type C,
      codepage_ref type ref to CX_SY_CONVERSION_CODEPAGE,
      out_char type c,
      size type i,
      insert_string type string,
      insert_size type i.
out_file = filename.
open dataset out_file for output in text mode ENCODING NON-UNICODE.
LOOP AT my_table.
    size = strlen( my_table ).
    insert_string = ''.
    DO size TIMES.
      offset = sy-index - 1.
      try.
          out_char = my_table+offset(1).
          IF out_char = SPACE.
            CONCATENATE insert_string '' INTO insert_string SEPARATED BY SPACE.
          ELSE.
            CONCATENATE insert_string out_char INTO insert_string.
            transfer insert_string to out_file NO END OF LINE .
            insert_string = ''.
          ENDIF.
        catch CX_SY_CONVERSION_CODEPAGE.
          insert_size = strlen( insert_string ) - 1.
          insert_string = insert_string(insert_size).
      endtry.
    ENDDO.
   transfer CL_ABAP_CHAR_UTILITIES=>NEWLINE TO out_file NO END OF LINE.
ENDLOOP.
close dataset out_file.
How do I get to insert the space for filler1 and filler2?
Edited by: Siong Chao on Oct 4, 2011 4:56 AM
Edited by: Siong Chao on Oct 4, 2011 8:27 AM
Edited by: Siong Chao on Oct 4, 2011 8:29 AM

problem lies in the open dataset codes
Used:
open dataset out_file for output in text mode encoding non-unicode message msg.
if sy-subrc= 0.
loop at my_table.
transfer my_table to out_file
transfer cl_abap_char_utilities=>newline to out_file no end of line.
endloop.

Help with portforwarding, how do set a range with the M1424-WR Rev.F?

Similar Messages

Maybe you are looking for