Help with possible iphone4s attack

Hi everyone!
This morning my iphone4s woke up from standby and someone was trying to key in the passcode. I turned the phone off after watching two failed attempts. I turned the phone back on later and disabled network and cellular access. My home network security is WPA2 and has AES encryption. I also run Norton Internet Security.
Has anyone else encountered this problem? How did you prevent future attacks? Thanks for your input.

Not trying to avoid responding to the question -- no, it's not a jail broken phone. I purchased it in person at the Verizon store. I don't think they would sell me a jail broken phone.

Similar Messages

Help with possibly dead ipod .... any hope?

While listening to my Ipod, it suddenly sounded like it was dying - the music slowed down - like when a cassette tape gets twisted or runs out of battery life. The screen froze. I know it was fully charged - the previous day I charged it until it indicated that I could disconnect - and the green battery icon was near full before it seized up. I tried reset to no avail. The screen went blank Plugged into to PC to try and charge, but screen stays blank and the pc doesn't recognize it.
Is there any hope for my ipod?
(I'm in India - there are no service centers listed on the Apple web page)
Any help from fellow Ipod users would be greatly appreciated.
Steve
Ipod 5th Gen Video 30G Windows XP
Ipod 5th Gen Video 30G Windows XP
Ipod 5th Gen Video 30G Windows XP

Hi John,
Thanks for the link. There may be some hope - as it seems that I might just have to keep trying. I did try plugging it into the pc to charge, but no response. I read somewhere that I have to wait 30 minutes or so for it to get enough charge to be recognized - assuming that it's the battery.
Do you have any insight as to why the song that was playing just slowly died - slowed down and sounded warped - could this be what happens with a disk drive when the battery goes? Maybe then all I need to do is charge it...
Thanks again,
Steve
Ipod 5th Gen Video 30G Windows XP

Help with possibly noobish question

Hello,
I need to make some complex graph structures such that this format will not do
1: 2 ->4
2: 4 ->2
I have several additions to each node to take care of that is the main problem.
each node has aarity which I could hold as a separate array to be accessed for each object instance of a node
Part 1:
The problem is that i have to know which node is connected to which arity element and then I have to search for the free elements and label their indexes with characters. I think I can solve this
Part 2:
The second problem is maybe a little worse as I have to translate certain groups graphs to something like this and then connect them to any graph as needed. Will i need to make a separate object for this purpose??
| ..................| n input wires connected |
|???????????????????????????????????|
| Wires maped to edges from graph |
|___________________________________|
| ..................| n output wires wires connected |
Part 3:
To compound this I have to find a way to implement a menu selector to choose random graphs or parts of graphs for a Genetic Algorithm. Selection is not the problem here its is mapping the structures into a chromosone which is causing me the problem.
Part 4:
Each connection has the graphs triggers different application specific rules that cause the graph to reduce or change connections.
Any help on strategies for these problems would greatly be appreciated
kind regards
Prashant

Hello all and thanks for the replies positive or not. Sorry if I offended you bbritta. I guess its not such and easy question after all.
Well its not due tomorrow and I am doing some research into a wierd topic so you guys are along the right lines. The topic I am researching is non-determinstic interaction nets. I don't know too many people doing this. Interaction Nets invented by a guy named Yves Lafont and you can google this and the topic I am researching.
All the code written thus far exists in C and is very hard to interpret as it uses a Lex and Yacc parser to implement the creation of tokens and syntax rules of the Interaction Nets programming language.
Basically its a high level visual graph programming language however it can also be used on low level based on interpretation. Thus the need for graph data structures. Essentially I have to modify this programming language for non-determinism and demonstrate this in a Genetic Algorithm. The latter would be no problem if I could get the data structure sorted. People familiar with Lamda calculus, Linear Logic and Process Calculus might have seen this in some research papers.
However I have not had a very good theoretical background so finding the data structures to map the complexity of the graphs is a little problematic. I will outline my idea and what I have done a little clearer below.
So far I have broken the prob into smaller steps as suggested by someone, I hope the pseudo code helps a little more.
class Symbol
convertASCIItoINt( char value) : return int
getChar() : return char
checkAvailability() : return boolean;
//each Symbol is assigned to a free port and is traditionally input.
//several instances of this obj are used to
class Port implements Symbol
initialisePort( num);
checkFreePorts( ) : return boolean;
setPortSymbol (port [num])
private ports [ num ];
setEndPortAsSpecial( ports [ num ]) // each node has a special port called principal port
// each node has a set of port and each port can have a label as a string
class Node
setNodeSymbol()
getnodeSymbol()
public Port node_obj [ port_num ];
setSpecialSymbol( string)
//destructor to delete node connected to
//duplicator to create a copy of cell value
//constructor create a copy of the cell
getSpecialSymbol() : return string symbol;
checkSpecialSymbol(node_obj [ port_num ]): return string symbol;
//so far as a typical graph goes i think its acceptable to connect the nodes in an vector with
//a list at each element although this is not shown below.
class Net
connecNodes( node_obj [ port_num], node_obj [ port_num] )
checkDeadlock(): return boolean; //check for cycles
public Node net_obj [ node_num ];
checkConnected( node_obj [ port_num], node_obj [ port_num] ): return boolean;
//this is where the execution engine will be placed
class InteractionRules
ruleTrigger( )
Node n = new n
n.checkSpecialSymbol()
// its here where things get complicated with the data structure as according to the rules I have to delete
// add or copy a value of a particular node in a Net
determineReduction()
    //if (ports [ num ] = num )
    // a reduction occurs according to the rule in the method above ruleTrigger();
   //at this point the relevant nodes will be removed and new nodes will be added according to the rules
storeCopyofOriginalNet()
   //needed to rollback if rules are infeasable or deadlock occurs.
}I desperately still need help to complete the data structure I have also considered manipulating the complex associations between the sets as multimaps and maps
Sorry if I am not clear I am trying my best to explain something I have had little background and almost no help in as I am creating the special rules as I go along such as keeping an copy of a net / graph before modifying it in the Genetic Algorithm.
Kind Regards and Best Wishes
Prashant

Help with enableing iphone4s please

Hi ok i don't know if this is working i am getting really frustrated. I updated my iphone4s and now it says to put in passcode which i did put in the right one or so i thought and now it says it is disabled. I have tried to restore but it says i need to get into my settings on my phone which i can not as i can't get in there. Can i please have some help please and Thanks

Just to calm your fears... There is no conspiracy. If someone had an answer or a suggestion they would post it.

Help with Possible Mask Bug in CF8

When letting a user edit their PRICE field at my website, I
populate the field with the VALUE attribute (as seen below) using a
MASK:
<CFINPUT TYPE="TEXT" NAME="price" VALUE="#price#" SIZE="7"
MAXLENGTH="7" MASK="9999999">Enter your price
<B>without</B> decimals, cents, or dollar signs.
Examples: 45, 1, 17900.
However, when pulling the number from the database, CF8 will
add trailing zeros to the number!!!!
For example: if #price# equals 25, the value populated in the
field is 2500000!!!
Is this a bug? When I reamove the mask, it works fine. It's
not doing this on my CF 4.5 (installed on my own server). I am
using a paid providers' CF8.
If it is a bug, how would I fix this and how do you report a
bug? This is the 2nd one I found using CF8 (the other was
Validate="integer" actually allows "$" as an integer ...also "$$$"
and "$454$3$$3$", etc.)
-Tony

tony17112acst wrote:
> Is this a bug? It's not doing this on my CF 4.5
(installed on my own server).
hmm... the 'mask' attribute was introduced in CFMX7...
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

Help with possible STISIM GUI

I am working in a psych lab and we use a STISIM drive sim to do some research. The problem is that this sim uses a weird proprietary code that scenarios must be written in. Its simple enough, but a huge time suck.
I was hoping there would be some way to develop a GUI with simple fields that could be filled out for each event, and then once all events were in place, the code exported in a simple text format.
I know very little about objective-c and xcode, but I was hoping someone could point me toward the kind of code I should be looking at to accomplish this kind of task. What functions can be used to take a bunch of single field inputs, convert them to another form, and then lump them all together in one big file?

Take a look at using AppleScript and Automator.

Need help with my iPhone4S

I just purchased an iPhone4S and I was wondering if there was a way to transferred the apps from my iPod Touch 4th gen to it. I know that I can upload the apps from iTunes, but I will have lost all my progress. Is there a way to do it without losing the progress I have already achieved.

If you have not loaded anything on the phone yet, do a backup of the iPod and restore the phone from the backup of the iPod. This will take the data too, since the game data is in the backup.

Help with possible hijacking virus in safari?

Hi,
Over the last few weeks I've been having a problem where I will type in the URL of a website, and instead of it loading properly - a completely different site loads. It only happens occasionally and seems to randomly pick when it's going to affect Safari. I'm typing in the URL correctly each time it occurs.
The websites that I have visited when it appears is facebook, megavideo, commonwealth bank and a few more.
Sometimes if I reset safari and empty cache it stops the problem for a little while.
I've also wiped my mac and reinstalled everything but I still keep having this little problem.
I've posted a grab of when it affects a site. After about a minute of the page below it automatically loads up ebay.
Just wondering if anyone can help me get rid of this virus or whatever it is that is causing it.
Thanks in advance.

It's not a virus; it's a Trojan Horse.
If you go to http://macscan.securemac.com/files/DNSChangerRemovalTool.dmg and download that and install it, it will remove the Trojan. Just remember to restart your Mac when that program is done, otherwise you'll still have the problem. You should also change your DNS servers to those from OpenDNS (http://www.opendns.com). They're faster than your ISP's DNS servers, and they will offer you protection from various malware and phishing scams.

Help with possible reasons for red light?

Hello,
Maybe somebody here has encountered the problem where the
Admin console cannot connect to the 'server1' server? Trying to log
in to localhost fails. I even tried to reinstall FMS, didn't help.
When I just first installed the whole thing yesterday I had a
green light, but then I broke someting apparently. I checked
fms.ini and the port is 1111 for admin.
Any ideas?
Thanks in advance,
Ari Telias

Ok, solved it, maybe it will help someone: Norton Security
was blocking it!
Cheers!

Help with possible mouseEvent/Keyboard Event problem

Hi guys, I am having trouble with a game I am creating right now. The problem seems to lie on mouse / Keyboard event.
Basically, I have a character that the player can control using the keyboard arrow keys and it works perfectly fine on its own. Whenever the game starts, the player can control the character instantly with the keyboard. Here's the problem now, after I added another page (at frame 1) and created a start game button, those keyboard events won't start immediately anymore. The player must click on the stage again before it works. Is there any method to solve this?
Right now, here is my Start button page.
var start_btn:Start_btn = new Start_btn;
start_btn.addEventListener (MouseEvent.CLICK, goGame);
function goGame(event:MouseEvent) {
gotoAndStop("game"); //The game's frame
this.removeEventListener(MouseEvent.CLICK,goGame);
Here's some code for the actual game part.
stage.addEventListener(KeyboardEvent.KEY_DOWN,keyP ressed);
function keyPressed (e:KeyboardEvent) :void {
//character movement code...like charcter.x++, x-- etc
Thanks in advance

How about trying:
stage.focus = stage;
in goGame().

Need help with updated iphone4

I updated my iphone4 and everything is fine. However, when I text people who have the latest software version, they said instead of my name showing, my email address shows instead. Why is it like that and how can I change this?

When I go under Messages, and go to Receive At, it doesn't give me the choice of adding a phone number, just another email address. It just shows my apple ID and my email which where I can be reached for messages at.

Help with possible intruder

Hi everyone. This is my first time in here or any other forum actually. I am looking for answers like most of us are. I had never opened my safari window on my iphone must before but noticed that it had a option called databases. Can anyone explain to me why I have m.yahoo.com and yahoo_services on there as a database. I deleted it once it came back again. I also had another database on when I first looked and it was an email address of an acquaintance of mine. Can anyone shed some light on either of these topics? Thanks

Thank you. I do use yahoo mail and go to yahoo. What about the email address that appeared there as a database?

Need help with possible dual listener configuration and listener traffic

Hello:
We seperate our network traffic to the database servers using VLAN's. We have application traffic on 192.168.1.x and replication/admin traffic on 10.112.28.x. We are looking to configure 2 listeners for the database, one to listen and respond on 192.168.1.x and one to listen and respond on 10.112.28.x. Right now, we have one listener that is configured for both networks, however, for servers that are connected to both networks, the client sends on 192.168.1 but receives a TNS redirect to 10.112.28. For clients only on the 192.168.1, the TNS redirect to 10.112.28 times out because the client cannot resolve the address. I can make available a Visio diagram of our current configuration. We also utilize server-side load balancing.
Here is our dilemma, confirmed by analyzing packet traffic to and from the database on a Fluke:
1) For servers in our environment that reside on BOTH network segments (multihomed), application "traffic" generated on 192.168.1.x arrives at the listener. Through server-side load balancing, a TNS redirect string is returned to the client, which, based on the following listener configuration, redirects the connection to the 10.112.28.x segment:
LISTENER_RMLNDB01 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.112.28.8)(PORT = 1521)(IP = FIRST))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.8)(PORT = 1529)(IP = FIRST))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
2) For servers that reside on only one network (ex. 192.168.1.x), when the redirect is returned to that server, it experiences a timeout and connection failure because it cannot physically reach 10.112.28.x
Is there any way, through tnsnames, splitting listener.ora, VLAN's, the database itself, anything, for us to have requests for 192.168.1 be returned on 192.168.1 and not redirected. Would client side load balancing be a better option? Any way to manipulate the service registrations?
Thanks for all future responses!
Paul

Hello:
We seperate our network traffic to the database servers using VLAN's. We have application traffic on 192.168.1.x and replication/admin traffic on 10.112.28.x. We are looking to configure 2 listeners for the database, one to listen and respond on 192.168.1.x and one to listen and respond on 10.112.28.x. Right now, we have one listener that is configured for both networks, however, for servers that are connected to both networks, the client sends on 192.168.1 but receives a TNS redirect to 10.112.28. For clients only on the 192.168.1, the TNS redirect to 10.112.28 times out because the client cannot resolve the address. I can make available a Visio diagram of our current configuration. We also utilize server-side load balancing.
Here is our dilemma, confirmed by analyzing packet traffic to and from the database on a Fluke:
1) For servers in our environment that reside on BOTH network segments (multihomed), application "traffic" generated on 192.168.1.x arrives at the listener. Through server-side load balancing, a TNS redirect string is returned to the client, which, based on the following listener configuration, redirects the connection to the 10.112.28.x segment:
LISTENER_RMLNDB01 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.112.28.8)(PORT = 1521)(IP = FIRST))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.8)(PORT = 1529)(IP = FIRST))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
2) For servers that reside on only one network (ex. 192.168.1.x), when the redirect is returned to that server, it experiences a timeout and connection failure because it cannot physically reach 10.112.28.x
Is there any way, through tnsnames, splitting listener.ora, VLAN's, the database itself, anything, for us to have requests for 192.168.1 be returned on 192.168.1 and not redirected. Would client side load balancing be a better option? Any way to manipulate the service registrations?
Thanks for all future responses!
Paul

Possible security problem with my iPhone4, it seems like it has been hacked into and my hotmail, facebook and university accounts (which all have different passwords) and proceed to change my passwords on me. This has happened twice.

I seem to be having security problems with my iPhone4, it seems like someone has hacked into my hotmail, facebook and university accounts (which all have different passwords) and proceed to change my passwords on me. This has happened twice and I have not left my phone unattended at any time that I can recall nor have I accessed these accounts from another source (i.e. computer/laptop) since changing my passwords after the first hacking occurred. Please help.

Anyone else at your university complaining about the same thing? It is more likely someone is stealing passwords by sniffing traffic over the university wifi or with a man-in-the-middle attack or by other means external to your phone. Try a Google search on "steal password" (without quotes) or "steal SSL password" and you'll learn more than you wanted to know about how passwords get stolen.
Some related info:
http://en.wikipedia.org/wiki/Session_hijacking
http://en.wikipedia.org/wiki/Man-in-the-middle_attack

Hi can you help with the following panic attack report,

hi can you help with the following panic attack report, macbook pro OS 10.7.3
Interval Since Last Panic Report: 157997 sec
Panics Since Last Report:          1
Anonymous UUID:                    7ADCF50C-CC18-405E-9D5C-03325D3A83FA
Thu Mar 29 05:37:28 2012
panic(cpu 0 caller 0xffffff80002c266d): Kernel trap at 0xffffff800021d905, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef801a845328, CR3: 0x0000000019452019, CR4: 0x00000000000606e0
RAX: 0xffffff801a8450d8, RBX: 0xffffff800e79f340, RCX: 0xffffff801a8450d8, RDX: 0xffffef801a8450d8
RSP: 0xffffff80a4623e90, RBP: 0xffffff80a4623eb0, RSI: 0x0000000020c85580, RDI: 0x0000000000000001
R8: 0xffffff80008bd890, R9: 0xffffff80058aeac8, R10: 0xfffffe80539a9928, R11: 0x0008000000053d89
R12: 0xffffff800e79f370, R13: 0xffffff8000846288, R14: 0xffffff801a8450c0, R15: 0x0000000000000001
RFL: 0x0000000000010206, RIP: 0xffffff800021d905, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffef801a845328, Error code: 0x0000000000000002, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80a4623b50 : 0xffffff8000220702
0xffffff80a4623bd0 : 0xffffff80002c266d
0xffffff80a4623d70 : 0xffffff80002d7a1d
0xffffff80a4623d90 : 0xffffff800021d905
0xffffff80a4623eb0 : 0xffffff800021daad
0xffffff80a4623ee0 : 0xffffff800023caa9
0xffffff80a4623f10 : 0xffffff800023cb36
0xffffff80a4623f30 : 0xffffff80005a3258
0xffffff80a4623f60 : 0xffffff80005ca448
0xffffff80a4623fb0 : 0xffffff80002d7f39
BSD process name corresponding to current thread: SophosAntiVirus
Mac OS version:
11D50b
Kernel version:
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
Kernel UUID: 7B6546C7-70E8-3ED8-A6C3-C927E4D3D0D6
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 5720232329361
last loaded kext at 5694112402758: com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.3 (addr 0xffffff7f807a3000, size 86016)
last unloaded kext at 248390619372: com.apple.driver.AppleUSBUHCI          4.4.5 (addr 0xffffff7f80a4e000, size 65536)
loaded kexts:
com.sophos.kext.sav          7.3.0
com.apple.driver.AppleUSBCDC          4.1.15
com.apple.driver.AppleHWSensor          1.9.4d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.driver.AppleHDA          2.1.7f9
com.apple.driver.AppleMikeyDriver          2.1.7f9
com.apple.driver.AppleIntelHD3000Graphics          7.1.8
com.apple.driver.AGPM          100.12.42
com.apple.kext.ATIFramebuffer          7.1.8
com.apple.driver.SMCMotionSensor          3.0.1d2
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.2
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
com.apple.driver.AppleMuxControl          3.0.16
com.apple.driver.AppleLPC          1.5.3
com.apple.ATIRadeonX3000          7.1.8
com.apple.driver.AppleUSBTCButtons          225.2
com.apple.driver.AppleUSBTCKeyboard          225.2
com.apple.driver.AppleIRController          312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.SCSITaskUserClient          3.0.3
com.apple.iokit.IOAHCIBlockStorage          2.0.1
com.apple.driver.AppleUSBHub          4.5.0
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.driver.AirPort.Brcm4331          513.20.19
com.apple.iokit.AppleBCM5701Ethernet          3.0.8b2
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleAHCIPort          2.2.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleUSBEHCI          4.5.8
com.apple.driver.AppleACPIButtons          1.4
com.apple.driver.AppleRTC          1.4
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.4
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          167.3.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.1
com.apple.driver.AppleIntelCPUPowerManagement          167.3.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.3
com.apple.iokit.IOUSBMassStorageClass          3.0.1
com.apple.kext.triggers          1.0
com.apple.driver.AppleAVBAudio          1.0.0d11
com.apple.driver.DspFuncLib          2.1.7f9
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOSurface          80.0
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.iokit.IOBluetoothSerialManager          4.0.3f12
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAVBFamily          1.0.0d22
com.apple.driver.AppleHDAController          2.1.7f9
com.apple.iokit.IOHDAFamily          2.1.7f9
com.apple.iokit.IOAudioFamily          1.8.6fc6
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.driver.AppleSMC          3.1.1d8
com.apple.driver.IOPlatformPluginFamily          4.7.5d4
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.kext.ATI6000Controller          7.1.8
com.apple.kext.ATISupport          7.1.8
com.apple.driver.AppleIntelSNBGraphicsFB          7.1.8
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.3f12
com.apple.driver.AppleUSBBluetoothHCIController          4.0.3f12
com.apple.iokit.IOBluetoothFamily          4.0.3f12
com.apple.driver.AppleThunderboltDPInAdapter          1.5.9
com.apple.driver.AppleThunderboltDPAdapterFamily          1.5.9
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.1
com.apple.driver.AppleUSBMultitouch          227.1
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.driver.AppleUSBComposite          4.5.8
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.3
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.driver.XsanFilter          403
com.apple.iokit.IOAHCISerialATAPI          2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.3
com.apple.driver.AppleThunderboltNHI          1.3.2
com.apple.iokit.IOThunderboltFamily          1.7.4
com.apple.iokit.IOUSBUserClient          4.5.8
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IO80211Family          412.2
com.apple.iokit.IOEthernetAVBController          1.0.0d5
com.apple.iokit.IONetworkingFamily          2.0
com.apple.iokit.IOAHCIFamily          2.0.7
com.apple.iokit.IOUSBFamily          4.5.8
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331.3
com.apple.iokit.IOStorageFamily          1.7
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.4
com.apple.iokit.IOPCIFamily          2.6.8
com.apple.iokit.IOACPIFamily          1.4
Model: MacBookPro8,3, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2.2 GHz, 4 GB, SMC 1.70f5
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 1024 MB
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.100.98.75.19)
Bluetooth: Version 4.0.3f12, 2 service, 18 devices, 2 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: TOSHIBA MK7559GSXF, 750.16 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0245, 0xfa120000 / 4
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3

Get rid of Sophos Anti-Virus software you have installed. Use the uninstaller or:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

Help with possible iphone4s attack

Similar Messages

Maybe you are looking for