Help with possible reasons for red light?

Hello,
Maybe somebody here has encountered the problem where the
Admin console cannot connect to the 'server1' server? Trying to log
in to localhost fails. I even tried to reinstall FMS, didn't help.
When I just first installed the whole thing yesterday I had a
green light, but then I broke someting apparently. I checked
fms.ini and the port is 1111 for admin.
Any ideas?
Thanks in advance,
Ari Telias

Ok, solved it, maybe it will help someone: Norton Security
was blocking it!
Cheers!

Similar Messages

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode?

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode? PC running XP and using the USB to communicate with the DAQ and driver boards. Application generated with 2010.
Thanks

Hello,
Usually default property is checked
system property -> devices ->usb root -> power management -> allow system to switch off device
Hope this help
Regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

Possible reasons for error 1074396005 invalid avi session

Dear All,
I am working on creating and writing frames on to AVI files. I need to start writing frames up on record on command and close the AVI file up on record stop command. I am trying to read frames from an recorded video and write in to another AVI file.
But i am observing Error 1074396005 invalid avi session, whenever i run the code. I am using AVI2 VI's (IMAQ AVI2 Create, AVI2 Write and AVI2 close).
I am using LabVIEW 2013 SP1 and Vision development module versions.
Below is the block diagram for reading an avi file and writing in to avi file upon record on command (numeric control value 1 to case selector)
Block diagram for record off
Below is the error observed:
Kindly suggest what would be the possible reason for the error.
With regards,
Sri
Attachments:
Block diagram1.PNG ‏59 KB
avi2 error2.png ‏381 KB
Block diagram2.PNG ‏20 KB

Might be good if you can post the code instead of screenshots.
-If session was closed or aborted due to some reason you should get this error.
-Multiple times you are creating the session inside the loop with same avi session, is it required?
-Are the images added to the avi file?
Thanks
uday,
Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
Certified LabVIEW Associate Developer (CLAD) Using LV13

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

I had bought iPhone 4 from OLX. When i had deleted iCloud account and restored my iPhone it is still asking me about Apple I.D to activate my Phone.. Why is it so..?? Suggest me a possible reason for my Question so that i may continue using my iPhone...

I had bought iPhone 4 from OLX. When i had deleted iCloud account and restored my iPhone it is still asking me about Apple I.D to activate my Phone.. Why is it so..?? Suggest me a possible reason for my Question so that i may continue using my iPhone...
I dont have any contact detail of that person whom i had bought this phone..

If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

HELP HELP HELP with adminstrator password for pavilion dv7 beats audio

Hi. I need help with adminstrator password for pavilion dv7 with window 7. I don't remember with is the adminstrator password for pavilion dv7 beats audio. Is there anyway you can help me with this? once i enter 3 times is gives me this system disabled code: 52464663.

Hi
Try this Key : 43542265 That should fix your issue
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Help with Simple Applescript for Midipipe

Hey all, I'm in desperate need of help with some Applescript for use in a program called Midipipe:
http://web.mac.com/nicowald/SubtleSoft/MidiPipe.html
I simply require an Applescript for Midipipe that filters out all OFF notes except for the most recently pressed key, or most recently pressed ON note. So for example, when multiple keys have been pressed, only the most recently pressed key will send an OFF note. I hope that is clear enough, i've had some major issues trying to get this work and my last hope is to hit the forums and find some help .. I've posted on some of the audio forums and i'm hoping someone here knows how to code this.
Thanks so much!! .. Its for an upcomming show next week so i'm hoping someone can get me in the right direction to solving this.
-Jes

I try to help, but you'll need to apply your brain cells to get it working with what I've already explained (three times with what I offer below). Try something like the following (I am renaming your buttons to ch1,ch2,ch3,ch4,ch5,ch6 so that the same functions can be shared by all buttons...
// this assigns listeners to all 6 buttons
for(var i:uint=1; i<7; i++){
          this["ch"+String(i)].addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint);
// this processes any one of the 6 btns when they are clicked
function fl_ClickToSeekToCuePoint_1(event:MouseEvent):void
    var btn = event.currentTarget;
    var cuePointInstance:Object = vid.findCuePoint(btn.name);
    vid.seek(cuePointInstance.time);
   resetButtons();    // this makes all buttons go back to normal
    btn.upState = btn.overState; // this makes the clicked button change states
function resetButtons():void {
     for(var i:uint=1; i<7; i++){
          this["ch"+String(i)].upState = this["ch"+String(i)].hitTestState;
For this to work, your buttons need to have the same artwork in the hit frame as they do in the up frame.

I still need help with the Dictionary for my Nokia...

I still need help with the Dictionary for my Nokia 6680...
Here's the error message I get when trying to open dictionary...
"Dictionary word information missing. Install word database."
Can someone please provide me a link the where I could download this dictionary for free?
Thanks!
DON'T HIT KIDS... THEY HAVE GUNS NOW.

oops, im sorry, i didnt realised i've already submitted it
DON'T HIT KIDS... THEY HAVE GUNS NOW.

One possible reason for the spinning beachball with versions 10.0.2 trying to play/see anything

Hi there.
I discovered today what is the reason for the strange problem I've been having with FCP X from 10.0.2+. The problem was that I just couldn't use it: I couldn't see any media in the canvas/preview pane, no matter if it was video, jpgs, psds, whatever. Trying to use or reproduce a project was just more of the same: a spinning beachball forever. At some point, from time to time, the black from the preview pane changes to a checkboard, but that was all.
This happened in 10.0.3, 10.0.4 and 10.0.5.
I tried everything, removing the events, projects, and so on. The only thing that worked was to create a new user in my machine and use FCPX there. Everything seems to work fine there. I did that yesterday at 3am. Today I saw that the colors were off in that user, and I remembered that the calibration is not setup at the system level, but for each user, so went on to change the profile to use the one I did for my screen (I have my screens calibrated frequently). Voilá, now FCPX doesn't work anymore on the new user. The only change was the profile, so I went to System Preferences, selected the old (default) profile, and now FCPX works fine.
I don't know if the problem is my profile (I created it with ColorEyes DisplayPro, I don't have anything else right now to try to create a new one) or if the issue is with FCPX itself, as I have only had problems with FCPX related to the profile. In any case, the issue is now identified in my case, and even if I don't like to work in a non-calibrated screen, that will have to do for now.
I will try some other calibration software and see if the results are the same, but I thought of sharing my findings here in case someone is still having this issue.
Tomorrow that the 5770 arrives for my Mac Pro 1,1 I'll try to run it, also with the calibrated screen, and see what happens.
HTH,
Rodrigo

I'm sorry, but I'm not sure what you mean with "the profile is downstream from ColorSync"?
I'm willing to accept that there is something wrong with the way ColorEyes DisplayPro is making the profile, although if the OS loads it and uses it and doesn't complain at all - nor any other app I use - I don't see why FCP should have issues with it. But I'm willing to try some other app to create the profile for the screen and will do as soon as I can get my hands on some other.
Between lines, hopefully I'm wrong, but I read you are telling me that FCP doesn't support having a "typical" monitor calibration, usual in printing/photography/etc workflows, but only supports calibrated output through broadcast monitors, using third party hardware? And that in the Color screen settings I must not use any "user generated" screen profile?

Needing Help with color setting for Photoshop 4 + imac

Hi, Is anyone able to assist me please. To cut a long story short. i have had to reinstall my original software onto my Imac as when i put on Snow leopard it was just slowing down Photoshop 4 and would keep crashing. So my problem is .... I had some prints printed today at Fuji and the prints have come back dark and just not up to scratch. I know that it is not Fuji, but my settings. I had someone set up my imac and Photoshop last time, but this time i will have to do myself and i just don't know what to set them at. Can anyone help please. Not sure if you need this info but i am in New Zealand. many thanks in advance.

Being in the business of printing other people's image files, I can say without any doubt that the advent of digital image processing has definitely muddied the waters to a much greater extent than was the case when printing negaive film. I'm also a shooter, and have been using such programs for many years, so I can understand the desire to manipulate your files before sending them to the lab. Color negatives never had "Profiles" attached to them. If the proper film was used for the lighting conditions, it was simply up to the lab to make sure the resulting print was in balance, both in color and density. It was also the lab's responsibility to maintain a degree of quality control that would make all of the above possible and repeatable. I have to agree with the other response to your question. Whether or not you have an embidded a profile, it's always the job of the printer to make sure the final print is up to a certain standard of quality. If that is not the case, find another printer. Unless you have indicated that your files should be printed without any corrections, the oweness belongs to the lab/printer. I do have a few customers whose work I can print with very few corrections, due to the fact that they have calibrated their displays and have a very tight workflow. However, the vast majority of files that I print require a considerable degree of correction, that's my job. It's also the job of your lab/printer and if they are nor satisfying your needs you have to find someone who does. I have printed many files that have no profile embidded and I simply convert them to my working color space(Adobe RGB 1998). If you are concerned about doing color settings, this is the obvious place to start. Create a custom space and make sure your working color is set to Adobe RGB 1998, not sRGB. Adobe RGB 1998 is a considerably larger color space with a wider gamut and will allow for more choices and a wider range when it comes to processing the image. Pro Photo RGB is an even larger color space, but one that is seldom used at this time. I suspect it will become more popular in the fairly near future, as other technologies continue to push the color gamut envelope.
So, I guess the gist of all of this is that you need to either have your lab/printer redo the dark prints, or find someone who knows how to print. And equally important, someone who cares about your work as much as yo do.
I am attaching a screen shot of my color settings and I would suggest this might be a good place to start.
Gary

Help with system upgrade for CS6

Hello. I am hoping you can give me some advice on what to do (or buy) to improve my video editing system. I am a bit of novice when it comes to the technical/hardware end of things and I’m having some issues with my current system.
I working in Adobe CS6 Master Suite on a Windows 7 Ultimate PC. I mainly use Premiere Pro, After Effects, Photoshop, and Audition. I create very complete animations and videos with many layers and effects (via Boris & Red Giant). I also use Skype to record group video calls (with the program Evaer) for a reality T.V. recap show which I also edit with my Adobe suite. However I have two main problems.
When I render out a 20 minute premier pro project (with several HD video layers and effects) it takes almost 13 hours. It seems like this is very long considering my high end components, and set up. For example I run ONLY my OS off an SSD. My programs are on another SSD. The files I use for the video are on another HDD, and I render to another HDD. I was told by keeping all the aspects on separate hard drives it would speed everything up. Is that true? I also am now reading that rendering to a SSD would speed things up. Should I consider changing my workflow/hard drive set up that way?
My other problem is that when I record my Skype group calls of 4 people (with Evaer) to my SSD the audio is always off when I bring it into Premiere. I don’t know if this is a problem with Evaer, a codec (it records it as H.264/MPEG-4 AVC Codec. At 1280 X 720 and 30fps), that SSDs auto compress files, or that my system just cant handle it. Plus Soundblaster & Nvida both seem to active as audio features on my system I don’t know if that effects anything. Is there any advice any of you have on this issue as well? Perhaps another program to record skype or group calls?
Finally… all that aside. Considering the work I am doing should I just upgrade my system to a better Mobo and graphics card. I see a lot of people are recommending a dual processor work station. If so what is a good motherboard, and processor(s) I should get if I build my own workstation? I have about $4000.00 I could invest in building one if you think would greatly improve my work flow and render times. I also have a quadro k5000 on the way, and id like to be able to use the memory I have already.
I realize I am asking a lot of questions. I would truly appreciate any help, advice or just a point in the right direction. I have included my current system specs below incase that helps with any of my questions. If you have any other questions or need more information just let me know. Thank you again in advance for any help you can provide.
-Eric
MOTHERBOARD:
Gigabyte G1.Assassin http://www.gigabyte.com/products/product-page.aspx?pid=3752#ov
PROCESSOR:
Intel Core i7 X 980
5 HARD DRIVES:
(1) SATA II WD (WD15EADS-00P8B0) 3gb Hard Drive @ 1.5TB
(2) OCZ SATA AGILITY II SSD drives @120GB: http://www.newegg.com/Product/Product.aspx?Item=N82E16820227543
(2) Hitachi 6gb SATA III drives @2TB: http://www.newegg.com/Product/Product.aspx?Item=N82E16822145473
3 DVD/CD/BLUERAY DRIVES:
(1) SATA DVD DRIVE
(1) SATA BlueRay Drive
RAM:
24GIGs of this ram: http://www.newegg.com/Product/Product.aspx?Item=N82E16820145321
GRAPHICS:
(1) NVIDIA GeForce GTX 680 http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-680
SOUND CARD:
NONE DEDICATED: But Onboard Creative Soundblaster X-Fi Digital Audio Processor (20K2) with X-Fi Xtreme Fidelity™ and EAX® AHD 5.0™ Technologies built into MoBo.
PLUS: NVIDIA High Definition Audio
CONTROLLERS:
Microsoft ISATAP Adapter
Intel(R) ICH10R SATA AHCI Controller
Realtek PCI GBE Family Controller
Marvell 91xx SATA 6G Controller
Renesas Electronics USB 3.0 Host Controller
MY HARD DRIVE SETUP:
*I also have a network server which I use to back up files, and access files across my other systems.

Eric,
I would hardly call the Quadro card an upgrade to a GTX 680!
Regarding getting more speed from a faster MB / CPU, since you already have a 6-core rig with 24GB of RAM I would think that any gains you would get would not be that dramatic.
Check out your cpu usage (Task manager) and see how busy your cores are during a test render. I am guessing that the Boris and / or Red Giant effects could be jumping your projects from gaining the full multi-core capabilities of the Adobe software.
Regards,
Jim

Need help with calculator project for an assignment...

Hi all, I please need help with my calculator project that I have to do for an assignment.
Here is the project's specifications that I need to do"
"""Create a console calculator applicaion that:
* Takes one command line argument: your name and surname. When the
program starts, display the date and time with a welcome message for the
user.
* Display all the available options to the user. Your calculator must include
the arithmetic operations as well as at least five scientific operations of the
Math class.
-Your program must also have the ability to round a number and
truncate it.
-When you multiply by 2, you should not use the '*' operator to perform the
operation.
-Your program must also be able to reverse the sign of a number.
* Include sufficient error checking in your program to ensure that the user
only enters valid input. Make use of the String; Character, and other
wrapper classes to help you.
* Your program must be able to do conversions between decimal, octal and
hex numbers.
* Make use of a menu. You should give the user the option to end the
program when entering a certain option.
* When the program exits, display a message for the user, stating the
current time, and calculate and display how long the user used your
program.
* Make use of helper classes where possible.
* Use the SDK to run your program."""
When the program starts, it asks the user for his/her name and surname. I got the program to ask the user again and again for his/her name and surname
when he/she doesn't insert anything or just press 'enter', but if the user enters a number for the name and surname part, the program continues.
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??
Here is the programs code that I've written so far:
{code}
import java.io.*;
import java.util.*;
import java.text.*;
public class Project {
     private static String nameSurname = "";
     private static String num1 = null;
     private static String num2 = null;
     private static String choice1 = null;
     private static double answer = 0;
     private static String more;
     public double Add() {
          answer = (Double.parseDouble(num1) + Double.parseDouble(num2));
          return answer;
     public double Subtract() {
          answer = (Double.parseDouble(num1) - Double.parseDouble(num2));
          return answer;
     public double Multiply() {
          answer = (Double.parseDouble(num1) * Double.parseDouble(num2));
          return answer;
     public double Divide() {
          answer = (Double.parseDouble(num1) / Double.parseDouble(num2));
          return answer;
     public double Modulus() {
          answer = (Double.parseDouble(num1) % Double.parseDouble(num2));
          return answer;
     public double maximumValue() {
          answer = (Math.max(Double.parseDouble(num1), Double.parseDouble(num2)));
          return answer;
     public double minimumValue() {
          answer = (Math.min(Double.parseDouble(num1), Double.parseDouble(num2)));
          return answer;
     public double absoluteNumber1() {
          answer = (Math.abs(Double.parseDouble(num1)));
          return answer;
     public double absoluteNumber2() {
          answer = (Math.abs(Double.parseDouble(num2)));
          return answer;
     public double Squareroot1() {
          answer = (Math.sqrt(Double.parseDouble(num1)));
          return answer;
     public double Squareroot2() {
          answer = (Math.sqrt(Double.parseDouble(num2)));
          return answer;
     public static String octalEquivalent1() {
          int iNum1 = Integer.parseInt(num1);
String octal1 = Integer.toOctalString(iNum1);
return octal1;
     public static String octalEquivalent2() {
          int iNum2 = Integer.parseInt(num2);
          String octal2 = Integer.toOctalString(iNum2);
          return octal2;
     public static String hexadecimalEquivalent1() {
          int iNum1 = Integer.parseInt(num1);
          String hex1 = Integer.toHexString(iNum1);
          return hex1;
     public static String hexadecimalEquivalent2() {
          int iNum2 = Integer.parseInt(num2);
          String hex2 = Integer.toHexString(iNum2);
          return hex2;
     public double Round1() {
          answer = Math.round(Double.parseDouble(num1));
          return answer;
     public double Round2() {
          answer = Math.round(Double.parseDouble(num2));
          return answer;
          SimpleDateFormat format1 = new SimpleDateFormat("EEEE, dd MMMM yyyy");
     Date now = new Date();
     SimpleDateFormat format2 = new SimpleDateFormat("hh:mm a");
     static Date timeIn = new Date();
     public static long programRuntime() {
          Date timeInD = timeIn;
          long timeOutD = System.currentTimeMillis();
          long msec = timeOutD - timeInD.getTime();
          float timeHours = msec / 1000;
               return (long) timeHours;
     DecimalFormat decimals = new DecimalFormat("#0.00");
     public String insertNameAndSurname() throws IOException{
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    while (nameSurname == null || nameSurname.length() == 0) {
                         for (int i = 0; i < nameSurname.length(); i++) {
                         if ((nameSurname.charAt(i) > 'a') && (nameSurname.charAt(i) < 'Z')){
                                   inputCorrect = true;
                    else{
                    inputCorrect = false;
                    break;
                    try {
                         BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("Please enter your name and surname: ");
                         nameSurname = inStream.readLine();
                         inputCorrect = true;
                    }catch (IOException ex) {
                         System.out.println("You did not enter your name and surname, " + nameSurname + " is not a name, please enter your name and surname :");
                         inputCorrect = false;
                    System.out.println("\nA warm welcome " + nameSurname + " ,todays date is: " + format1.format(now));
                    System.out.println("and the time is now exactly " + format2.format(timeIn) + ".");
                    return nameSurname;
          public String inputNumber1() throws IOException {
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader br = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("\nPlease enter a number you want to do a calculation with and hit <ENTER>: ");
                         num1 = br.readLine();
                         double number1 = Double.parseDouble(num1);
                         System.out.println("\nThe number you have entered is: " + number1);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("\nYou did not enter a valid number: " + "\""+ num1 + "\" is not a number!!");
                         inputCorrect = false;
                    return num1;
     public String calculatorChoice() throws IOException {
          System.out.println("Please select an option of what you would like to do with this number from the menu below and hit <ENTER>: ");
          System.out.println("\n*********************************************");
          System.out.println("---------------------------------------------");
          System.out.println("Please select an option from the list below: ");
          System.out.println("---------------------------------------------");
          System.out.println("1 - Add");
          System.out.println("2 - Subtract");
          System.out.println("3 - Multiply");
          System.out.println("4 - Divide (remainder included)");
          System.out.println("5 - Maximum and minimum value of two numbers");
          System.out.println("6 - Squareroot");
          System.out.println("7 - Absolute value of numbers");
          System.out.println("8 - Octal and Hexadecimal equivalent of numbers");
          System.out.println("9 - Round numbers");
          System.out.println("0 - Exit program");
          System.out.println("**********************************************");
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("Please enter your option and hit <ENTER>: ");
                         choice1 = inStream.readLine();
                         int c1 = Integer.parseInt(choice1);
                         System.out.println("\nYou have entered choice number: " + c1);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("You did not enter a valid choice number: " + "\""+ choice1 + "\" is not in the list!!");
                         inputCorrect = false;
                    return choice1;
     public String inputNumber2() throws IOException {
          boolean inputCorrect = false;
               while (inputCorrect == false) {
                    try {
                         BufferedReader br2 = new BufferedReader (new InputStreamReader(System.in));
                         System.out.print("\nPlease enter another number you want to do the calculation with and hit <ENTER>: ");
                         num2 = br2.readLine();
                         double n2 = Double.parseDouble(num2);
                         System.out.println("\nThe second number you have entered is: " + n2);
                         System.out.println("\nYour numbers are: " + num1 + " and " + num2);
                         inputCorrect = true;
                    } catch (NumberFormatException nfe) {
                         System.out.println("You did not enter a valid number: " + "\""+ num2 + "\" is not a number!!");
                         inputCorrect = false;
                    return num2;
     public int Calculator() {
          int choice2 = (int) Double.parseDouble(choice1);
          switch (choice2) {
                    case 1 :
                         Add();
                         System.out.print("The answer of " + num1 + " + " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 2 :
                         Subtract();
                         System.out.print("The answer of " + num1 + " - " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 3 :
                         Multiply();
                         System.out.print("The answer of " + num1 + " * " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 4 :
                         Divide();
                         System.out.print("The answer of " + num1 + " / " + num2 + " is: " + decimals.format(answer));
                         Modulus();
                         System.out.print(" and the remainder is " + decimals.format(answer));
                         break;
                    case 5 :
                         maximumValue();
                         System.out.println("The maximum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
                         minimumValue();
                         System.out.println("The minimum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 6 :
                         Squareroot1();
                         System.out.println("The squareroot of value " + num1 + " is: " + decimals.format(answer));
                         Squareroot2();
                         System.out.println("The squareroot of value " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 7 :
                         absoluteNumber1();
                         System.out.println("The absolute number of " + num1 + " is: " + decimals.format(answer));
                         absoluteNumber2();
                         System.out.println("The absolute number of " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 8 :
                         octalEquivalent1();
                         System.out.println("The octal equivalent of " + num1 + " is: " + octalEquivalent1());
                         octalEquivalent2();
                         System.out.println("The octal equivalent of " + num2 + " is: " + octalEquivalent2());
                         hexadecimalEquivalent1();
                         System.out.println("\nThe hexadecimal equivalent of " + num1 + " is: " + hexadecimalEquivalent1());
                         hexadecimalEquivalent2();
                         System.out.println("The hexadecimal equivalent of " + num2 + " is: " + hexadecimalEquivalent2());
                         break;
                    case 9 :
                         Round1();
                         System.out.println("The rounded number of " + num1 + " is: " + decimals.format(answer));
                         Round2();
                         System.out.println("The rounded number of " + num2 + " is: " + decimals.format(answer));
                         break;
                    case 0 :
                         if (choice2 == 0) {
                              System.exit(1);
                         break;
               return choice2;
          public String anotherCalculation() throws IOException {
               boolean inputCorrect = false;
               while (inputCorrect == false) {
                         try {
                              BufferedReader br3 = new BufferedReader (new InputStreamReader(System.in));
                              System.out.print("\nWould you like to do another calculation? Y/N ");
                              more = br3.readLine();
                              String s1 = "y";
                              String s2 = "Y";
                              if (more.equals(s1) || more.equals(s2)) {
                                   inputCorrect = true;
                                   while (inputCorrect = true){
                                        inputNumber1();
                                        System.out.println("");
                                        calculatorChoice();
                                        System.out.println("");
                                        inputNumber2();
                                        System.out.println("");
                                        Calculator();
                                        System.out.println("");
                                        anotherCalculation();
                                        System.out.println("");
                                        inputCorrect = true;
                              } else {
                                   System.out.println("\n" + nameSurname + " thank you for using this program, you have used this program for: " + decimals.format(programRuntime()) + " seconds");
                                   System.out.println("the program will now exit, Goodbye.");
                                   System.exit(0);
                         } catch (IOException ex){
                              System.out.println("You did not enter a valid answer: " + "\""+ more + "\" is not in the list!!");
                              inputCorrect = false;
          return more;
     public static void main(String[] args) throws IOException {
          Project p1 = new Project();
          p1.insertNameAndSurname();
          System.out.println("");
          p1.inputNumber1();
          System.out.println("");
          p1.calculatorChoice();
          System.out.println("");
          p1.inputNumber2();
          System.out.println("");
          p1.Calculator();
               System.out.println("");
               p1.anotherCalculation();
               System.out.println("");
{code}
*Can you please run my code for yourself and have a look at how this program is constructed*
*and give me ANY feedback on how I can better this code(program) or if I've done anything wrong from your point of view.*
Your help will be much appreciated.
Thanks in advance

Smirre wrote:
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??You cannot restrict the user. It is a sad fact in programming that the worst bug always sits in front of the Computer.
What you could do is checking the input string for numbers. If it contains numbers, just reprompt for the Name.
AND you might want to ask yourself why the heck a calculator needs to know the users Name.

Need help with adjusting size for photos in my website

Wow it's super to know about adobe forum which i never thought existed, i have been to the adobe site several times befor but never noticed there is a forum
Ok i have few issues would like some help if possible.
I have a website for public holidays and festivals and i have been really stressed in the ways i am adding the photos which i am buying from fotolia. First in my featured images the screen is very wide and slim...so i am really having hard time with adjusting the photos so they would fit in a way and show the best part of the photo in the screen, once the featured image is clicked on then their is no problem since it opens up in the full size. Is their a speacial tool in adope (i have cs4) which deals with images in this aspect? Secondly, before i was downloading the image with the regular size in which i bought them (around 3000 px) but that significantly slowed my webiste and i had to resize them into around 500 px, but now the image is small. what is the way around that, is there a feature where i can keep the photo big size with high resolution and little px. I see many big nice resolution photos but very small in size. i have just purchased a lot of photos that i would be posting soon and would like to do them right from the start.
I don't know if i explain the situation right in words but you can take a look here, most photos for the posts are on the main page, please take a look and tell me how i should revise or make better for my photos in the featured images.
I have very little experiance in photoshop so i made a very simple logo, but is there a tool that is speacialy designed to help make it easy doing a professional logo?
Any comments, hints or help would be highly appreciated
Hmmm one more thing....how do i add a pic for my profile? i don't see anywhere i can do so

You should use the crop tool to crop your images. You should never squish your images, it really looks unprofessional:
For your problem with saving images, you can optimize your images for web using the "Save for Web…" menu option:
Make sure that you save your images at the dimension that you want them to display on your website (It looks like all your images in the blog are 620px wide, go with that).
As for your logo, you can make them in Photoshop or Illustrator, but I would reccomend making yours in the latter. Here are some tutorials on logo creation: http://ibrandstudio.com/tutorials/46-adobe-illustrator-tutorials-logo-design

Need help with JSSE settings for Axis2 auto-generated client.

Hi all.
I have several working clients generated for me in Axis2 from WSDL's using wsdl2java utility. The clients use HTTP transport but I need to use HTTPS now. I assume JSSE is used for SSL communication in Axis2.
I have created the keystore and set these parameters in code.
System.setProperty("javax.net.ssl.trustStore", "/path/to/.keystore");
System.setProperty("javax.net.ssl.trustStorePassword", "changeit");
The lower level mechanics such as socket creation and utilization are hidden from me in Axis2.
What other ssl parameters can be set similar to these? I particularly care about protocol, cipher, keep-alive? I couldn''t find the whole list with possible values. Or may be I should use some different method to set them?

Hi,
While creating the stub use https as end point instead of http.
example: https://java.bytesforall.org/webservices
Configure the properties for the SSL and so that jsse be have accordingly
https.cipherSuites,javax.net.ssl.trustStore ...etc.
If you are planning to make your webservice client FIPS complaint. Currently there is a problem with Axis1.4 it is not honoring the property "https.cipherSuites" to use the cipher suites.
Let me know, if you need any further help
~Balaji

Possible reasons for Error 30005?

Hi All,
we're on ep7, sp12..we've been encountering the foll error lately when we try to use any BI query frm one particular BW system..(holds true for all users)
when we try to drag the query to the iView, we get the Error -30005, Cannot create the BI data service, Cannot add BI data service to the iView.
the strange things is we can search for queries. however, upon attempting to see the characteristics, etc we get the foll error: "Error -30027 Cannot retrieve structure, Cannot read query description.."
Could anybody pls advise on the possible reasons/resolutions for this?
thanx
prachi

Hi Prachi,
I feel with you. I have the same problem and just a few hours ago everything was working fine. thats very strange.
Mark

Help with possible reasons for red light?

Similar Messages

Maybe you are looking for