Help with PPro CC 2014.1 and Blackmagic Mini Monitor

Hello everyone
I just installed a Decklink Mini Monitor card for use with Premiere Pro CC 2014.1. I installed the latest card drivers and updates and all is working fine. I set Premiere playback settings to Blackmagic output, navigated to the Blackmagic control panel and set default video standard to 1080 50i and then I created a new Blackmagic YUV 720p 50p project. The footage used in my project is 720 50p and 1080 50i. What puzzles me is that although I have output for both the above formats when either is placed on the timeline (program monitor) I only get preview of the source monitor when the footage loaded to it is 1080 50i, no external preview of any other footage, not even 720 50p. Any ideas on this? I even tried switching default video standard output to 720 50p with no luck and I get the feeling it's a Premiere issue, because the footage loaded to the source monitor on both Avid's MC 8 and Grass Valley's Edius 7 works jist fine. Any help will be greatly appreciated :-)

Ok, since I found the solution, I felt I should share. It turns out the problem was from withim PPro. I had to navigate to Edit > Preferences > Playback, then go to the Blackmagic Setup option and select either "Scale to fit" or "Centered" at the "unsupported format" option.

Similar Messages

Any help with a Time Capsule install and Mac Mini server screen share?

Installed a Time Capsule, now I can't access my mac mini server. I see the files/folders, but cannot screen share with the mini from my macbook pro. Any help? Error below when trying to use the "screen share" button in Finder. Macbook Pro and Mac Mini are using Mountain Lion 10.8.2.
Connection Failed Error: Please make sure that Screen Sharing (in the Sharing section of System Preferences) is enabled on the computer to which you are attempting to connect. Also make sure your network connection is working properly.
Please help, I'm really stuck on this one!

Try removing the TC and see if the problem disappears.
Screen Sharing has a checkered histroy looking back through the posts..
https://discussions.apple.com/message/16026896#16026896
There are many discussions about failing after changes in Lion.. I haven't seen the equivalent ML yet.. the TC may not be root cause, just the initiator of the problem.
It could be the BTMM associated with the TC.
https://discussions.apple.com/thread/4160415?start=0&tstart=0

Please help with iOS 7.1.1 and iPad Mini

We loved our iPad mini until we accepted the upgrade to iOS 7. Since upgrading and now most recently to 7.1.1, the applications are jerky -- games are not usable -- and there seems to be a 'phantom' touching controls when we're not. Is there anyway to downgrade? Is there some setting/feature in 7.x we can shut off that's interfering with the interface?
Very sad Apple doesn't take Quality Control more seriously -- we pay a premium price for their products. Thinking about maybe getting the Nokia Windows tablet.

You can't downgrade iOS levels.
Your problem may not be related to iOS 7 or 7.1.1.
I haven't seen the sort of problems that you are reporting on my iPad.
The "phantom touching" touching sounds like your iPad may have developed a hardware problem with the touch screen. If you are using a screen protector remove it to see if that helps. If the problem persists contact Apple Support or visit an Apple store for an evaluation.

Help with if statement in cursor and for loop to get output

I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM.........      jim@ aol.com.... 284087.............     9/28/2006.......10/5/2006...........690
JIM.........      jim@ aol.com.... 292709.............     3/20/2007.......3/28/2007............516
KIM.........      kim@ aol.com.... 185083.............     8/31/2004.......2/9/2006.............     928
KIM...........kim@ aol.com.... 190121.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133.............     2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159.............     2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237.............     2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109.............     9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647.............     11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631.............     4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922.............     7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332.............     1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336.............     1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............     1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............     1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............     48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............     175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PM

analytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results.

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Problem with DW CC 2014.1 and the BC add on

Hi all,
I have had this problem on both of my computers that I have Dreamweaver CC 2014.1 installed on.
I have been using the program for some time, but suddenly on opening it I am unable to connect to BC to download a new site and start working on it using Site/Manage Sites in the top menu.
Instead I am sent to a page to download the BC add on. When I sign in to download it, I am told I have it already, and am not given a link to download it.
The steps to rectify this are:
1. Close out of DW
2. Go to Creative Cloud (figure 8) and open it.
3. Make sure Sync files option is turned on
4. Download the Add on manager.
5. Launch the Add on Manager and go around in circles for a while using the Add on manager to uninstall, and the webpage to download the BC app to uninstall and reinstall the app.
6. Start and quit out of DW while doing these steps (sorry I could not work out a logical sequence of things to do in steps 5 and 6)
7. Eventually DW CC 2014.1 will have the BC app and you will be able to connect to BC and download the site you want to work on
However once this was done, when I started working on the site in DW CC the preview for the template I was working on had a 404 error for the template, so I could not see in split view in DW how the page looked.
So I had to go back to Adobe Creative Cloud app and turn off file sync to see how the page looks in the split view.
I think there is something wrong with DW CC 2014.1 and file sync in the Adobe Creative Cloud app.

Hi,
In case you still have this issue, please try some suggestions mentioned here,
Re: Business Catalyst extension not working since upgrade

Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.01 Updates on Iphone 4?

Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.06 Updates on Iphone 4?
I have tried the following all ready:
Resetting Phone
Resetting Settings on phone
Change Headsets to speakers
Reinstalled Phone
Updated to IOS 7.1
No of the above has resolved the issue does anyone have any ideas?

Can anyone help with issue whereby Music, Podcasts and Audiable Book Apps keep stopping when listing via Headphones following IOS 7.06 Updates on Iphone 4?
I have tried the following all ready:
Resetting Phone
Resetting Settings on phone
Change Headsets to speakers
Reinstalled Phone
Updated to IOS 7.1
No of the above has resolved the issue does anyone have any ideas?

Hi i would like help with: When I draw circle and add stroke I can not see stroke I use Photoshop CS 5

Hi i would like help with:
When I draw circle and add stroke I can not see stroke
I use Photoshop CS 5

Make sure the stroke is set to a color and not to the symbol that appears here for Fill

This is just to report a problem with Apple updates. I updated recently and the computer brought up my 2012 desktop with all my 2014 files and data including stickies missing! Now I hesitate to do another Apple update. What would you do?

Apple Updates: This is just to report a problem. I updated recently and on restart the computer restored up my 2012 desktop with all my 2014 files and data including stickies missing!!! Now I hesitate to do another Apple update. What would you do?

If all your files are missing
You may have logged in as a different user, such as Guest. Open the Users & Groups pane in System Preferences. Your name should be at the top of the user list, under Current User. See also this support article.
If files are missing from one folder
Change the Finder view mode; for example, from icon view to list view, or vice versa.
If files are present, but seem outdated
You may have started up from a different volume (disk.) Open the Startup Disk preference pane and check the selection.

Blackmagic Mini-monitor

i've installed AE 2014 and i now can't get my Blackmagic Mini-monitor to work. I've downloaded the new 10.1.2 drivers for Mac from Blackmagic with no luck. any thoughts?

There have been a few recent threads discussing issues with Blackmagic devices A possible workaround was offered in this one:
Re: mercury transmit doesn't work with my blackmagic studio 2 card

Blackmagic mini monitor/Premiere CC Multicam

Hi,
I am using premiere CC with a multicam project. I've used premiere before on smaller projects and tried the new CC with a bigger project. Nine Cameras all ex3. loved the fact that I didnt have to transcode but now I am regretting it.
So I am using a blackmagic mini monitor which is fine in composite mode. But when I switch to multicamera mode the monitor freaks out and loses sync/picture and if I switch back to the composite mode it finds itself again. to tell you the truth I found cs6 far more stable than CC. Why can't I get multicam playback on the black magic card? tested the same situation in Final Cut and it was fine so its not the card. Is there something I need to click/turn on or off or something to get playback?
It also freaks out and if i double click the multicam sequence to see the sequence in the source monitor.

I haven't seen or heard yet of this issue. I can output from the Multi-Camera monitor without issue from my Decklink HD Extreme 3D and Decklink 4K. I'll try to test on my UltraStudio 3D as well.
When you say the 'monitor freaks out' what does it do exactly?
Can you provide your system specs and also your monitor model number. Lastly can you include your frame rate and resolution of your media.
Thanks!
Peter Garaway
Adobe
Premiere Pro

PPro CC 2014 Crashes and More Problems

Posted on Twitter and Adobe Help said to post our issues here....
Ever since we've updated to CC 2014 we have lots of issues on our systems:
1. Routine crashes.
2. System really lags, especailly after having PPro open for a few hours - btw, talking the entire computer slows down, along with PPro.
3. PPro won't OPEN some previously saved projects (saved in CC 2014). It tries to open them and then at 99% there the program crashes. This has been scary.
4. When we shut PPro down it often won't shut down completely and has to be Forced Quit.
We've been very happy with CC, and so hopefully Adobe will update the software soon so they don't lose they're goodwill.
Btw, this is happening on three computers... a two-year old iMac, a six-month old iMac and a brand new Mac Pro.

Hi,
Please go to following location move the Adobe folder to desktop,
User Library >> Application support>>
User Library>> Preferences>>
Make sure you're in user library not in system Library.
Access hidden user library files | Mac OS 10.7 and later
Please rename the Adobe folder in documents to old.adobe
Now try and launch.
Hope that helps.
Thanks
Mohd Naseem.

Need some help with Slow Downs in Java3D and Servlets

Hi,
I realize that there is a separate forum for Java 3D, but I posted there, and did not get any response. This is kinda the crux of my program, so I would like to invite anybody on this forum with knowledge of Java 3D and servlets to give it a stab. Between this post and that one, there are TWENTY duke dollars up for grabs.
Thanks.
http://forum.java.sun.com/thread.jspa?threadID=603198

Let me have an educated guess.
You calculated the time elapsed before sending in a server request - and at that point you have you updated timeLastStateChange yet, which means by the time of the next calculation of time elapsed this apparent delay is not counted in, hence the slow down in animation rate.
Hope this helps~
Alex Lam S.L.

Help with importing PC photo files and then organizing it all in iPhoto

Hi everyone,
I'm relatively new to mac but I am just loving my purchase! I need some serious help with getting all of my photos organized though so I can easily find it for editing in iMovie.
I've accumulated over 10,000 photos stored on my PC which I've since transferred over to my LaCie external drive for my MacBook Pro via a wireless network connecting my PC & Mac. Some of these I've put onto my laptop internal hard drive and those I've imported into the iPhoto library. However, do I need to move the rest of the photos from my LaCie drive into my internal hard drive to import the photos into iPhoto, or can I tell iPhoto to look for the files in the external drive. If so, how do I do that? I know I'll then have to create albums in order to sort them, which I know how to do. Is there any fast way to do it by date? I had it sorted into different file folders by month & year so I could easily find them on my PC and would like to do the same using albums.
I am quickly running out of hard drive space on my laptop which is why I've put most of my photos on the external drive. Once I organize my existing collection, I would like to be able to import new pictures and have it stored on my external drive, not my internal drive. How do I do that?
Any other tips on organizing a massive photo library would be greatly appreciated.
Thanks,
Karen

Karen,
Is there any fast way to do it by date? I had it sorted into different file folders by month & year so I could easily find them on my PC and would like to do the same using albums.
This is where you get to enjoy the power of iPhoto's database. You can change the Sort in the View menu. Check out View > Sort Photos > by Date.
Or, click the little calendar icon near the lower left corner of the iPhoto window. This allows you to filter the library by year, month, week, or date. You can Command-click to add another date to your filter. You can Option-click to choose a recurring date: you get that month or date for all years in your library. [Want to see your kid's birthday for every year? Just Option-Click that date. Cool.]
The keywords filter is similar. There is a preference setting where you choose to filter based on ALL keywords chosen (where by choosing more keywords you narrow your field) or ANY keyword (where the more keywords you choose, the larger your field will be). Click on a keyword to filter your library by all photos containing that keyword. Use Command-click to add more keywords to the filter. A difference is that Option-click will eliminate photos with that keyword from your filter. [You can find all pictures of your kids with your dog but NOT at Halloween.]
You can create Smart Albums to combine the use of dates, keywords, ratings, titles, comments and more. The more information you enter into the database, the more powerful the tools become.
When your task of importing is complete and you are ready to play with iPhoto's features it may help to look at the iPhoto multimedia tutorial. Better organized than trying to read through the Help files, it can help you get acquainted with many of iPhoto's features.
Have fun.

Need help with Go Pro Hero 3 and Premiere Pro CS6

Hello,
I recently acquired PP CS6. I put my clip (30 seconds long) and I go to preview while editing, for the first 1.5 seconds it is fine but then it is very choppy. The audio is fine but the video does not play smoothly. When I save and process the video it is fine. It is frustrating to try to edit video this way. I'm sure I'm missing a step when creating the project but I haven't used Premiere Pro since CS6. This is only happening with Go Pro Hero 3 videos, any of my other cameras are fine. Any ideas? Thanks

There's a lot of confusion over how video encoding affects subsequent editing performance - a higher data rate has no direct relation to how much effort is required to decode and play the footage, in fact a higher data rate often makes playback easier - which is why transcoding to AVI can help with playback even though the files can be hundreds of times larger. Data rates with the same codec depend on the frame contents and recording quality, but for playback and editing what matters is the GOP (group-of-pictures) structure and the complexity of the encoding algorithm. Provided your disks are fast enough the data rate is immaterial to Premiere.
With long-GOP files (as typically created by consumer DSLRs and helmet cams) we have keyframes (I-frames) with a complete set of pixel data, then a series of intervening P- and B-frames which only store the difference between 'now' and 'one frame before' or 'one frame after'. Unless you're on an I-frame you have to calculate the chain of differences from the nearest I-frame, and when editing or applying an effect we must re-calculate the entire GOP, so Premiere has to hold a lot of data in the buffer. Remember all timelines in Premiere are internally transcoded to 32-bit floating point, so it's more work to 'play' the footage in the monitors than would be done by a simple playback-only application such as VLC, or in some other brands of NLE that only work in the footage's color space. Premiere's hardware acceleration (MPE) only kicks in once the buffer has been ingested, all the decoding of the original H.264 frames happens in your CPU.
With digital cinema cameras and some hacked DSLRs, we record "all-I" footage - so there's no GOP overhead and playback/editing is massively smoother. I can scrub all-I footage from a hacked 7D no problem on my relatively-ancient spare laptop, but the long-GOP files from a factory 7D struggle to play at all. Our all-I 7D footage can hit 300MBit/s compared to 35 for long-GOP. Helmet cams such as the GoPro do all they possibly can to squeeze data onto their storage cards, which means they have long-GOP codecs that have some of the most complicated compression algorithms out there. The Hero3's implementation of H.264 uses the Ambarella chip, whose files are very small but an utter nightmare to decode - hence far more of a demand on your CPU than an equivalent clip from a DSLR.
Jim Simon wrote:
Might be the 35 Mbps that is causing the choppy playback.
It shouldn't, assuming sufficient hardware. My GH2 clips often get up to over 90 Mb/s and play just fine on an older i7 920.

Help with PPro CC 2014.1 and Blackmagic Mini Monitor

Similar Messages

Maybe you are looking for