Help with Premiere 1.5 - Configuration Change - Can't Open Program!

I apologize if this question has already been answered in the forum, but I am mid-project and need assistance (with Premiere Pro 1.5).
After a system restore, I tried to open Premiere and got this message: 'Your computer's configuration appears to have changed since the time the product was activated. To continue using this product, please click OK to activate it again for your new system configuration, or click Cancel to exit.'
After clicking 'OK' and waiting, nothing happens - and I have to go to the task manager to close Premiere.
Do I need to re-install?
If so, how do I back up and preserve my Premiere projects so they are not lost after Premiere Pro is reinstalled?
Thanks in advance for any assistance.

I would immediately contact Adobe Customer Service (not Technical Service).
For whatever reason, you have lost Activation. C/S can reset that for you. There could be a lot of reasons for this, and in the end, C/S might well have you uninstall and reinstall, but I would call them first.
Good luck,
Hunt

Similar Messages

Need help with premiere pro cs6 having performance issues please help

need help with premiere pro cs6 having performance issues please help

Welcome to the forum.
First thing that I would do would be to look at this Adobe KB Article to see if it helps.
Next, I would try the tips in this ARTICLE.
If that does not help, a Repair Install would definitely be in order.
Good luck,
Hunt

I need help with my wifi text. I can't use them

I need help with my iPhone 4. I can't text since. I get wifi in my house ?

What is the make & model of the wireless router that you are trying to extend with the WN3000RP? Can any other wireless clients connect to the extended network, just not your iMac?

The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin, how can I eliminate this problem without dropping m. firefox?

A few days ago I tried to e-mail a friend, when I started A box came up and it required me to add a plugin..Java. I contacted my e-mail courier and microsoft, they told me that is was a plugin from Mozilla Firefox. Since then I must go through Java to send or open an e-mail... this is NOT to my satisfaction, it takes too long for all of this to open and if it is not cleared , I am dropping Mozilla and going elsewhere. Why has this occurred? Is this a result of the last update? If so can I delete the last update and continue on the other version?
== This happened ==
Every time Firefox opened
== last week

Sorry, I have no idea what you mean by '''"The Java plugin has created a time unfriendly issue with my e-mail account, I can not open or send any e-mail without using this plugin,"'''.
If you think your problem is caused by the Java plugin, you should visit the Java support forum for assistance.
http://forum.java.sun.com/index.jspa
If you could explain what you mean by '''"time unfriendly''' issue with my e-mail account", maybe we'll be able to help you solve that issue.
It might be helpful for us if we knew exactly which web-mail provider you are using. It seems strange to me that viewing or sending web-mail would actually "need" Java for operation, its more likely that some other item on the web page needs Java to run some advertising or other garbage that isn't a necessary part of the web-mail functionality you want to use.

Users (no administrator) can´t opening programs...

After installing Mavericks os x 10.9.2, users (no administrator) can´t opening programs (safari, calculator, any other). Only Finder can be open.
I deleted un account, created again, but the same.
Somebody has the same problem? and solution?
Macbook 2009 later. Thxs.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Need help with Premiere Pro CS6 playback problem

Can somebody help me please? My premiere pro cs6 does not play plenty video in the time line for editing irrespective of using fast 64 bit, intel core i7, 16gb ram pc. Please what could I use to make it more stronger?
Edited by: Kevin Monahan
Reason: Changed title for better search ability.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

I need help with "Premiere CC"!

Hello my name is Alexander!
I have problems with "Premiere CC"!
-> I have two different *.mov-files and I can not place these two individual movie clips after another. How do you do it? (I have created a project!)
-> It is not so good sound quality with noise and various noises! I wonder if there's any good way to remove it? I have also "Audition CC" but need some help on what to do in that program in such cases.
Thank you in advance for your help!
Sincerely at1981!

You have created a Project.
Next you must "Create a Sequence" in that Project.
That sequence becomes your edit timeline.
Drag a clip on to the "New Item ICON" at the bottom of the Project Bin
Your second question is too broad to answer because we cant hear the problems in your audio.

Help with a simple 1811 configuration

I have a very basic level of understanding with Cisco products and I need help with what should be simple and even doable by me.
I have a Cisco 1811 integrated router and am simply trying to use it on my home network. I can configure the router with an enable secret password, password encryption, VTY, aux, and cons logins with no issues. The router has 2 Ethernet interfaces, 0 and 1 and 8 switch ports.
The idea is to bring Comcast ISP service into one of the Ethernet ports and then have three machines on the switch ports able to access the Internet. Also I have an off-the shelf wireless router that I thought I would just plug that into an available switch port and allow a wireless AP as well.
This is so simply, that I can't believe I can't figure it out, but I can't.
I set int F1 to DHCP, performed a 'no shut', and connected the ISP's router and have an up and up indication. I have setup a static network with my three machines on the switch ports and enabled all applicable ports and have up and up indications - however, no traffic flow, even amongst my static Layer 2 switched LAN - not even a 'ping'. By my understanding of Layer 2, this should work right now, whether the ISP service is working or not - WHAT AM I DOING WRONG?
The addressing scheme I have ended up on is 172.16.1.0/28
Obviously without the first hurdle cleared, of why the switched LAN doesn’t work, I haven't got any deeper. Do I need to configure NAT? I don't think I would need to in the scenario right?
All of my experience, and none at the CCNA level, has been with larger Cisco equipment. One thing I noticed on the 1811 was that when trying to create a new VLAN, it appears to work yet does not do anything and the 'sh vlans' output returns nothing, not even the VLAN1 I can see with 'sh ip int brief".
Anyway, if anyone has time to help a newbie out I would appreciate it; I’m lost.
Thanks,
Josh

Thanks for the help Andrew! You know, I think if this was two separate devices (switch and router) I think I would be up and running, but this integrated stuff is throwing me off, not to mention that the IOS is a much older version (I guess) than what I'm used to.
They were throwing this 1811 in the trash can at work, so I just emptied the trash can. I have no documentation at all but I have since found the 1800 series documentation on Cisco.com and have tried to implement the basic configurations cited; with what seems like success, but still no joy. I did have to recover the password and did so with 0x2142, I bypassed the setup and compared the default configuration with what is listed in the documentation and they DO NOT match; I also tried to go through setup mode with the same indications. Additionally I've also learned that the 1800 series is pre-configured on certain options (DHCP, VLAN), which is new to me - I thought Cisco routers were not configured by default - isn't that kind of the point? (By the way, the below port status may not be correct since I now have all the ports unplugged)
Anyway, here is the 'show run' command, the 'sh ip int brief' command, followed by the 'sh version' command:
Show Run
Casino#sh run
Building configuration...
Current configuration : 2006 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Casino
boot-start-marker
boot-end-marker
enable secret 5 $1$meWw$nsMTp6US7axi/uE0MWULK.
enable password 7 06535E741C1B584C55
no aaa new-model
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 172.16.1.1
ip dhcp pool Casino
   import all
   network 172.16.1.0 255.255.255.240
   default-router 67.165.208.1
   dns-server 68.87.89.150
   domain-name hsd1.co.comcast.net
no ip domain lookup
ip domain name GinRummy.localhost
ip name-server 68.87.85.102
ip name-server 68.87.69.150
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
multilink bundle-name authenticated
archive
log config
hidekeys
interface Loopback0
ip address 172.16.1.1 255.255.255.240
interface FastEthernet0
no ip address
shutdown
duplex auto
speed auto
interface FastEthernet1
ip address dhcp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
pppoe enable
pppoe-client dial-pool-number 1
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface FastEthernet9
interface Vlan1
no ip address
ip nat inside
ip virtual-reassembly
interface Dialer0
ip address negotiated
ip mtu 1492
encapsulation ppp
dialer pool 1
ppp authentication chap
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat pool Casino 172.16.1.2 172.16.1.14 netmask 255.255.255.240
ip nat inside source list 1 interface Dialer0 overload
access-list 1 permit 172.16.1.0 0.0.0.15
dialer-list 1 protocol ip permit
control-plane
line con 0
password 7 080E5916584B4442435E5C
login
line aux 0
password 7 013C135C0A59475A70191E
login
line vty 0 4
password 7 09635B51485756475A5954
login
end
Show IP Interface Brief
Casino#sh ip int brief
Interface                  IP-Address      OK? Method Status                Prl
FastEthernet0              unassigned      YES NVRAM administratively down do
FastEthernet1              unassigned      YES DHCP   up                    do
BRI0                       unassigned      YES NVRAM administratively down do
BRI0:1                     unassigned      YES unset administratively down do
BRI0:2                     unassigned      YES unset administratively down do
FastEthernet2              unassigned      YES unset up                    do
FastEthernet3              unassigned      YES unset up                    do
FastEthernet4              unassigned      YES unset up                    do
FastEthernet5              unassigned      YES unset up                    do
FastEthernet6              unassigned      YES unset up                    do
FastEthernet7              unassigned      YES unset up                    do
FastEthernet8              unassigned      YES unset up                    do
FastEthernet9              unassigned      YES unset up                    up
Vlan1                      unassigned      YES NVRAM up                    up
Loopback0                  172.16.1.1      YES manual up                    up
Dialer0                    unassigned      YES manual up                    up
NVI0
'show version'
Casino#sh ver
Cisco IOS Software, C181X Software (C181X-ADVIPSERVICESK9-M), Version 12.4(15))
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 24-Jan-08 13:05 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)YH12, RELEASE SOFTWARE (fc1)
Casino uptime is 52 minutes
System returned to ROM by reload at 17:09:25 UTC Fri Jul 1 2011
System image file is "flash:c181x-advipservicesk9-mz.124-15.T3.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 1812 (MPC8500) processor (revision 0x400) with 118784K/12288K bytes of m.
Processor board ID FHK120622J3, with hardware revision 0000
10 FastEthernet interfaces
1 ISDN Basic Rate interface
31488K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Thanks again for your help,
Josh

After having to reinstall my drive with applications I get a message with Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". How do I do this? I am using a mid-2010 iMac 27" with 10.7.3

After having to re-install my start-up drive recently I am getting a message with Adobe Premiere Pro CS5 that it can't find any "capable video play modules" and asks me to "update" my "video display modules". I am using a mid-2010 iMac 27" with OSX 10.7.3. How do I do this?

Premiere is an Adobe application and is supported in their forums.
Good luck.
x

Need help with Premiere Pro 6 media/file management!

I've been an Avid editor for 20+ years and understand media management in that world. I've recently learned FCP 7 and understand media management in that world. But for the life of me I cannot wrap my head around how Premiere Pro 6 manages media. I am looking for a very straightforward explanation, chart, anything to make sense of this. Thanks in advance for helping an old dog learn new tricks!

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Help with Premiere Pro freezing after importing MPEG files

I have
had some files sent for me to edit which are MPEG I believe. They will import, but
as soon as I try and do anything with it, the whole thing freezes for several minutes! It is unworkable. I have tried waitin
g for the audio file to conform. I have tried rendering the work area. None of this helps. If it does play, it lasts for a few seco
nds with sound playing at what appears to be twice the speed! I normally wortk with DV files and these are fine. By the way, the files I am struggling with do play in media player/real player etc. I cant believe that premiere would not support this format. Even Movie Maker just about manages it! When it does freeze, it really freezes! As in it wont even let me shut down without literally ripping out the power cable!! Please help with simple English if possible, and sorry if I havent given you specifics that you would need. But I honmestly dont know as these were just files sent to me on a memory stick. It was filming from a camcorder, but not sure what type. The thumbnail says MPEG and the properties just says movie file. It is about 2GB for an hour I think. Thanks for any help. My version is Premier Pro 1.5

Genuinely sorry that I dont know all the technical things that people need
to know. I always try to find out when I am asked specifically and told how
to find them. I did look at the link, but that just seemed to be a lot of
stuff about posting ettiquette, nothing about MPEGS. Perhaps I got the link
wrong. All a bit hard for me as I have a visual imp[airment. Thanks again

Will a ramdrive help with Premiere Pro 5.0?

I am upgrading my memory to a total of 32 GB and have read a little bit about using a ramdrive. Will this help with video editing, and if so, how can I best utilize this extra memory?

JobJoe wrote:
I am upgrading my memory to a total of 32 GB and have read a little bit about using a ramdrive. Will this help with video editing, and if so, how can I best utilize this extra memory?
I don't completely agree with what Harm said in his post, but some of his points are valid. First it shouldn't really take any machine very long at all to create a RAM drive, and once created it should be easy to constantly re-use. If it fills up with scratch files that you know you don't need, you can delete the files, or free the RAM drive and then re-create it.
That said, memory use is the key and only you know how much RAM your PPro instance is using during your normal editing. If you know for sure that PPro never exceeds, say, 10G of RAM, you could easily create a 16G RAM drive and tell PPro to use it for scratch space. But obviously that's 16G of RAM you can't use for anything else, so your system will begin paging if it needs more for some reason. So before you do that, it's up to you to figure out A)how much RAM you need to do your normal edits, and B)how much space you need for scratch, on average.
I do think 32G is cutting it a bit close, per Harm. I have 48 and I cut 16 of it off and make a scratch drive with it. That works out well for me, but it may not for you. You have to figure that one out yourself.
Make sense?
jas

Help with Premiere Pro

Hello, I started a project on a trial run of Premiere Pro CC, and then when it expired I purchased Premiere Pro as a CC, and month to month.
Thursday I went to open it and got a "this project contained a sequence that could not be opened...." error, and researched how to fix it. The helps didnt help, but then suddenly when I tried again it opened in a newer version of Premiere Pro.
So I figured it had to update, and now I'm updating again, because I got the same error message.
My question is: Should I uninstall Premiere Pro 2014? Its showing that my trial was for Premiere Pro 2014, and what I purchased was Premiere Pro (NOT 2014).
I just want to work on my project without these errors that keep popping up, and I'm not sure what I should do.
I'm a little confused, so if this didn't make sense, please ask me to clarify...

The user solved their issue:
EDIT: I updated Premiere Pro and it works fine now. So i just want to know if I should un-install Premiere 2014
Thanks,
Kevin

HT4528 I need help with my I phone and I can get verizon to let me on there to talk and I will have to have my phone so that I can do what you tell me to do

I need help with my phone it is not ringing and I cant figure where in here to make it so it will something has been pushed so I cant hear any calls or texts

Not when you insist on being so impatient.
These are user to user support forums. No one here is paid to read or respond to messages.
Try explaining the issue instead of the jumbled, rambling mess of a title and we will be happy to assist.

Adobe Premiere CC 2014 crashing and can't open project in Premiere CC

Hi,
Till now I had been working with Premiere CC with no problems. I decided to try out Premiere CC 2014 with a new project, and I regret I did.
I start working ok, but after about an hour of editing, it freezes on playback. And its a much smaller project then the ones I've worked on CC. No color correction and very few effects yet. Its frustrating. I have to force quit premiere and start over again, for a little more time before it freezes again.
I tried to open the project in premiere CC and was surprised that I can't. I can't even save the project it appears from Premiere Pro CC 2014 to Premiere CC, just one version down??
If anyone know a way to do this please let me know. Premiere Pro CC 2014 is not ready yet.
I have a MacPro 5,1 running on 32 GB RAM, with an USB 3 raid drive. It worked seemlessly and pretty fast with Premiere Pro CC, while Premiere Pro CC 2014 gets clogged.
Many thanks

Hi, Arjun,
My OSX version is 10.9.2 and I'm using only a Red Giant plug in in two short clips, and a RED Giant transition. I have the newest Red Giant Plug in Versions (for the Premiere Pro 2014 update), they worked fine in Premiere pro CC.
Is there a way to take the Premiere Pro CC 2014 project to Premiere Pro CC?
Many thanks.

Help with Premiere 1.5 - Configuration Change - Can't Open Program!

Similar Messages

Maybe you are looking for