Help with Premiere elements 9 trial

Hi,
I am new to this, and need a little help..
I have the trial version of Premiere Elements 9 and I'm finding that when I try to split a clip in two using the scissors button, that it goes into
auto analyzer, which seemingly takes about 6 - 10 minutes +, I can't imagine it is supposed to do that, what could be the reason? & can I change a setting anywhere?
Many thanks,
Helpthischap.
I have a Windows 7,
64 bit HP computer,
dual core, decent HD,
Intel chipset.

Welcome to the forum, and to PrE.
Most users find that AutoAnalyzer does more to get in the way, and they turn that OFF. Though written for PrE 8, I think that this FAQ Entry will apply to turning OFF Background Rendering and AutoAnalyzer.
Good luck, and if things changed dramatically in PrE 9, look for an update from our tireless MOD, Steve Grisetti.
Hunt

Similar Messages

  • Help with Premiere Elements 12

    Hi I am really struggling with Adobe Premiere Elements 12 - I used the trial reasonably well, but when I changed to the full version things started going wrong - I removed it off my computer 3 times and redownloaded it, but I can't get it to work - I have used Premiere 3 for years with no problems and if my old computer hadn't died I would still be using it,I upload from a Sony mini dv camcorder through a firwire, I hope I don't have to change my camcorder too. I can see the upload through the little screen at the front - but it won't go to my timeline or save - I have contacted support twice to be told try again later when more technical people are there - I have been struggling for over a week now - getting nowhere - need help

    Hi
    Thanks for replying
    I have just bought a new HP Pro pavilion Core i3 500gb Hard drive win
    pro 7 - I have had a Radeon HD6670 1gb graphics card fitted - also a
    Star tech com 2 port PCI express 1394 Firewire card - 2X 6-pin female
    Before changing my computer - I used premiere elements 3 without any
    problems, but my old computer was 6 years old and kept crashing when
    burning DVD's so I decided to get a new one - and I obviously needed to
    upgrade my software as 3 was very old hat. So I trialed premiere
    elements 12 for a while and managed to use it apart from the fact I
    could not upload on the HDV camera bit it kept saying no HDV camera
    connected - but if I clicked on the DV camera it took it and also
    showed on the timeline and saved as individual clips and not one full
    continuous clip (which now after I have after I bought the full adobe
    12 software it will not load or save my videoing) I use a Sony HDV mini
    dv camcorder HDR-HC9 - When I go into settings it is set on
    PALavchd-fullhd108I25 but then it says no HDV camera connected and no
    DV camcorder connected but if I set it to PAL DV widescreen 48khz - it
    says no HDV camera - but if I add to the DV camera -it shows my
    videoing on the little screen on the front, but not on the back screen
    or on the timeline and it won't save, I couldn't manage to edit my
    videoing when it was in one continuous clip ( I think I may have done
    something - don't know what though as the first time when I was
    trialing it - it was in individual clips and the second time i tried it
    had changed to being in one long clip!!) - I want it to show on the
    timeline and be able to edit each individual clip as I did before
    a) I have removed all the software 3 times and reloaded it - but I just
    keep getting nowhere apart from really stressed out with it all - I
    think it is installed properly - although at one stage it was telling
    me that it was uninstalling the software - but I have a shortcut for
    both Premiere elements and premiere photoshop (not even tried to use
    that yet) and yes it is installed to the default local disk c location
    b) yes to both slow opening and closing
    c) not sure what you are asking me here - unless I have answered it
    above
    I am hoping to get in touch with Adobe again tomorrow after work as
    each time I have contacted them I have been told the people who can
    help me weren't available at the times I  was on line ( it has been too
    early 8am this morning or too late 8pm the other evening) - I tried to
    ring them after 9 last week it took me over 6 minutes pushing buttons
    before I got put in a queue which I had to leave or I would have been
    late for work.
    I am presuming you are nothing to do with Adobe - so I can only say
    thank you very much for attempting to help me - I do appreciate it as I
    have been getting very stressed and frustrated with it all as
    everything takes forever and I don't really have that much time to mess
    with it and I am not very good with reading some of the instructions as
    a lot of it doesn't make sense - I am better when I am shown how to do
    things - so please if you need to tell me things don't be too technical.
    Thanks again for replying and hopefully helping me
    Ronnie (Veronica Orr)

  • Help with Premiere Elements 3.0,  won't work with Win7 Home Prem 64bit

    Does anybody knows if there's a patch or update for Premiere Elements 3.0 for Win7 Home Premium 64bit?  This software is a little bit old, but works great with my WinXP pro.  When I upgraded to Win7 Home, 64bit, Premiere Elements 3.0 would not work at all.  At first, I thought it was my hardware, but the software just crashed even without any video capture devices connected to my computer.  Any help is appreciated.
      Thanks!

    Well, there's no guarantee version 3 will work on Windows 7 at all -- let alone the 64-bit version.
    Have you installed the 3.02 patch for the software? That makes it Vista compatible -- and if anything will make it work, that will.
    Otherwise -- and assuming you've got the latest firmware for your video card and the latest version of Quicktime -- if it doesn't work for you, it simply may not. Sorry.

  • I need help with Premiere Elements 8

    I have enough rams and storage space. I am working in windows XP; I finished a project with still pictures, music, home movie clips, and title menu. I got the program to burn the first copy. I need 19 more, but the program keep "crashing". I have restarted, shut down and open the pc and program back up and nothing is working to keep it from crashing. Can anyone help me? Please!

    Hello LTDaniel (Lieutenant?),
      I am sorry to hear about this issue you are encountering, it must be frustrating.
      If you have not already done so, please check the troubleshooting steps documented in our knowledge base: 
    System errors and freezes | Burning DVDs, Blu-ray discs | Premiere Elements 8
      If you are not able to find a solution after trying these steps, please repost your inquiry on the Premiere Elements forum (this is the Photoshop Elements forum):
    http://forums.adobe.com/community/premiere_elements
    -Brett

  • Help with Premiere Elements 4.0

    I had to do a clean install and reinstalled Adobe Premiere Elements 4.0.  I cannot find the box and the serial number.  How can I obtain it ?

    Welcome to the forum.
    First place to look would be to go to Adobe.com, and log in with your Adobe I.D. You will then go to your Registrations, and it should be there. If not, look for your invoice from Adobe, and give them a call. So long as you registered with them, they will have that S/N in the database. There is a Contact link at the top of the forum pages.
    Good luck,
    Hunt

  • Help with Premiere Elements 11

    I'm using Premiere Elements 11 and I unlinked the video & audio, how do I link them back together?

    This thread was incorrectly posted to the Adobe Captivate forum and has since been moved to the Premiere Elements forum.

  • How can i get live help for premiere elements 11

    how can i get live help with premiere elements 11

    Click I STILL NEED HELP at this next link for Premiere Elements chat
    -http://helpx.adobe.com/contact.html?product=premiere-elements&topic=activating-my-product- or-serial-number-issues

  • PrE 12.  How to deal with black screen "Created with Adobe Premiere Elements trial version"?

    I'm really considering purchasing PrE 12 and would like to try it out.  (I have another video editing software and would like to try this one.)
    When I add video, I get a black screen "Created with Adobe Premiere Elements trial version".  When I hit play, I can hear audio, but I don't get any video (just the black screen).  Is there a work around, a setting that I can change, or is the trial version supposed to show the black screen? 
    Thanks,

    To help with troubleshooting, some questions so people have more to work with
    More information needed for someone to help... please click below and provide the requested information
    -Premiere Elements FAQ http://forums.adobe.com/thread/1042180
    And, exactly what are you editing?
    Codec & Format information, with 2 links inside to read
    -read both links in reply #1 http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the fil

    Error message while burning DVD with Premiere Elements 13 with Mac Book Pro i7/7200t/mn with 60GO free space available on gard drive. message: "erreur logicielle interne: DVA/premiere/elements/pre12/pre-mediacoreCS7". can someone help burn my DVD (the file goes very well with chapters and scenes before burning). thanks very much, response appreciated, Alain

  • What are the installed fonts that come with  Premiere Elements 13

    Anyone Please
    What are the installed fonts that come with Premiere Elements 13
    and If I download the trial and then convert with a purchased, does the trial have all the fonts and themes and add-ons, more that the disk version.
    I have a new Mac, and it does not have a DVD drive, but I can get one need be.
    Thanks

    BabieMe
    The Premiere Elements tryout should have all the features of the program. But, remember that Premiere Elements Mac does not necessarily have all the features
    of Premiere Elements Windows.
    Premiere Elements Windows uses Windows fonts.
    Since I am strictly an Elements Windows user, I am not sure of the details of Mac fonts. Not sure if the following will help.
    Mac OS X: Font locations and their purposes - Apple Support
    Fonts on Macintosh - Wikipedia, the free encyclopedia
    Based on the Windows model, I would suspect that Premiere Elements Mac will use the Mac fonts of the Mac system.
    ATR

  • Problem with premiere elements 4.0

    i am having
    problem
    with premiere elements 4.0. it keeps on crashing and when i put pictures on the timeline it comes up black. when i try to preview it either it shows black or sometimes the picture but i cant see it to delete if i wanted to. also it gave me a message something like that adbe is running low on memory and i should be caution

    This is aimed at Premiere Pro, but may help
    Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

  • Adobe Premiere Elements Trial Installation Problem

    When I try to install the Premiere Elements trial, I keep getting the message, "Sorry an error has occurred.  The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author."
    Please help!
    Thank you,
    Danna

    Download agfain using a suitable browser like Firefox and using this method:
    Direct Download Links for Adobe Software

  • HELP! Premiere Elements 10 Video Exporting

    Hi,
    I'm a new PrElements 10 user, and I am on deadline and need some help, thanks! I'm new to video so talk any help getting me through this is appreciated.
    Here's the description of the project:
    ++ I'm making a cartoon video and am using CS5 with Premiere Elements 5.
    ++ It is for internet use: website, social media, YouTube.
    ++ I'm by importing jpegs made from .ai files in CS5. I'm not NOT shooting video or importing video into the project.
    ++ I'm giving the jpegs the appearance of animation by treating them through the use of FX, transitions, etc. I'm not using AfterEffects, so I cannot create animations that way.
    ++ The .ai files are sized in widescreen 16:9 at pixel size 800 x 450.
    ++ The jpegs were exported from these files with the resolution settings: 5 and 425 ppi.
    I mocked up a short video using some of the jpegs to make sure the settings were right before I did the whole project. Here are the problems I'm having:
    1.) the exported video is not showing in Widescreen. The video is goes all the way to the top and bottom of the screen but the ends are squashed in so the content and characters are distorted to appear taller and thinner than they should.
    2.) when i change the export settings, some of them correct the problem and some of them don't. This export preset works to get it into Widescreen but the file size is huge:  "MP4-H264 1920*1080p 24".
    3. Which brings me to compression. Does PrE have compression to resolve this issue- is it in one of the presets- what compression should I be using? Or do I have to buy a compression program? If so, what do you recommend?
    4.) Project Set-up: Is this where I went wrong? Which preset should I be using for this jpeg-driven project? How does that Project Preset affect the input settings and output settings? And should I be using jpegs or tiffs or native .ai files???
    5) My project preset is HD 1080i. Is this present affecting this exporting result?
     Thanks!

    You will find best advice over on the video forum. Most of us here are photographers.
    Click on the link below and copy and paste your question again. Good luck.
    Video questions: Click here for Premiere Elements Forum

  • Burning dvd with premiere elements 11

    I burn video files on to dvds.  I always key NTSC widescreen.  Sometimes, the image fills the tv screen.  Most of the time however, there is a 2" wide black border around the image, between the image and the edge of the tv screen.  How do I get the image to fill the tv screen?

    Thank you for responding to my problem.  I'm afraid the reading didn't help.  All of my 20 files were created with the same camera, the same project settings, the same equipment, etc.  But when I burned each of them to their own dvd disc, a few of the programs filled the frame on the tv down the hall.  Most however, have a 2" black border around the image.  It makes no sense to me. 
    Date: Sun, 10 Mar 2013 10:32:25 -0700
    From: [email protected]
    To: [email protected]
    Subject: Burning dvd with premiere elements 11
    Re: Burning dvd with premiere elements 11 created by John T Smith in Premiere Elements - View the full discussion
    Some reading that may help... what you describe SEEMS like a mismatch between your video and your project
    Online User Guide http://help.adobe.com/en_US/premiereelements/using/index.html
    -Page to download current PDF http://helpx.adobe.com/premiere-elements.html
    Importing Video http://forums.adobe.com/thread/1065281
    -and project settings http://forums.adobe.com/thread/1112086
    Saving & Sharing http://forums.adobe.com/thread/1137128
    -Sharing to DVD or BluRay http://forums.adobe.com/thread/1137645
    -Sharing for Movies http://forums.adobe.com/thread/1051093
    -Sharing for Computer http://forums.adobe.com/thread/1058237
    Steve's Basic Training Tutorials... steps are the same for several versions
    -http://forums.adobe.com/thread/537685
    -v11 http://www.amazon.com/Muvipix-Guide-Premiere-Elements-version/dp/14793 11200/
    -All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/14 51529724/
    -and http://forums.adobe.com/thread/498626
    -and http://prodesigntools.com/four-hours-free-video-tutorials-new-photosho p-elements-9-pse9.html
    -and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-prem iere-elements-7-and-8.html
    FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_ faq
    TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_ tips
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5136593#5136593
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5136593#5136593
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5136593#5136593. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Proxy Editing with Premiere Elements 10

    I just read the great post on how to proxy edit with version 7 at http://forums.adobe.com/thread/390600?tstart=0, but I cannot find a way to save a preset with Premiere Elements 10 so I could then modify it to display previews in low-res and output in full HD. The online help from the program mentions "creating" presets, but then only describes how to slelect existing presets. Can anyone tell me how to make a new project preset, or better yet, if there is a built-in way to proxy edit with 10? Thanks!

    jjenkinsnm
    For reasons that I have not figured out, your last message arrived as an email notification of an Adobe post, but it is not posted in your thread yet. In that post you wrote:
    The properties for the clips shows:
    Type: MPEG Movie
    Image Size: 1920x1080
    Frame Rate: 23.976
    The Interpret Footage settings show under Frame Rate the radio button for Use frame rate from file: 23.9750 is selected, and under Pixel Aspect Ratio the radio button for use pixel aspect ration from file is selected.
    I never received a message to change the project preset.
    As a test, I imported a clip that was shot at 1920x1080 30fps and added it to the timeline. I did not receive an error message, but this clip also has a red line above it on the timeline (as do the 24 fps clips).
    Thanks for the help AT and SG.
    Based on the information supplied, I cannot see a reason why your video should be displaying with a red line over its content
    IF
    a. Your project preset = NTSC DLSR 1080p DLSR 1080p30 @ 23.97
    b. You are dragging the import (1080p @ 23.7 progressive frames per second) from Media to Timeline as the first video to be placed on that Timeline
    Please review these criteria and let us know if you spot anything that you have as not consistent with a and b.
    Keep in mind, when you bring in a file that is 1080p30 into this project set for 1080p24, you would expect to get a red line over the 1080p30 content since there is a mismatch between file and the project settings.
    Another important matter that I am not clear on...is your problem only in previewing? Or does the problem go to previewing as well as exported product?
    Thanks.
    ATR
    Add On: After I submitted this post, I saw that your post which I found missing previously is now displaying in your thread.

Maybe you are looking for