HELP with Presto Poll
Ok, I have been trying to add a poll on my site for two days
and the frustration is overcoming me! :-(
I have no, let me repeat again, no experience with SQL
databases, so after some surfing I came across a little PHP program
called Presto Polls. Seemed cool, and apparently works for others.
I downloaded the prestopoll-4 (
http://sourceforge.net/docman/display_doc.php?docid=28878&group_id=100446
) and transferred it to my site to a folder called "polls".
I next went to the admin-poll.php and changed the question to
one of my own. I then added 3 answers. So far so good... I then
look online via direct link the poll.php file and it looks fine and
will let me vote. No problem.
I then inserted an iform into my webpage. (Using Dreamweaver
CS3 on a Mac) I link the iform to the poll.php file in my poll
folder. Upload the page and it doesn't work. It shows the iform box
but nothing inside .
Does anyone know what have I missed, or better yet some other
easy way to create a poll while not having to be a programmer?
Any advice or help is greatly appreciated.
You can always make this suggestion to the DW team. For one,
though, I
wouldn't really support devoting development funds to such a
specific
purpose.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Corey Spann" <[email protected]> wrote in
message
news:[email protected]...
>I just wanted to post a follow up to my previous
question. I managed to
>work
> out the problem, and have to say this is a very cool
little piece of
> software/code to do a poll or survey on a website. Have
a look here at
> what it
> did:
http://www.betrayalofanation.com/trailer.html
>
> The problem was actually in the adding of an iFrame. I
surfed the net and
> found the right code like this: <iframe
> src="
http://www.yourdomain.com/poll/poll.php"
width="215" height="250"
> frameborder="0" scrolling="no"> </iframe>, and
it worked fine. There are
> limitations to this freeware?s capabilities, but for a
down and dirty
> survey
> you don?t need any SQL databases, etc.
>
> I honestly think it would be a very useful addition to
Dreamweaver to be
> able
> to create a web poll via a DW wizard or something. To be
able to easily
> create
> a poll/survey would add interaction for the visitor and
feedback for the
> site
> owner. To me this is a valuable addition to managing and
implementing a
> site.
>
> I know DW supports SQL, etc., but how much easier would
it be if DW could
> create a php type set of files that could be easily
uploaded. This would
> be for
> simple type surveys only. Basically a wizard that asked
for the question,
> answers, width, etc. and you?re done! That would be
slick and quite
> useful. I
> realize it would only work on servers that would run
php, but the brains
> at
> Adobe could do the code in something else if they
wanted.
>
> Just my 2 cents, but I hope someone takes a look at it,
since it could,
> and
> would likely be used by many if it were easier.
>
> Thanks.
>
>
>
>
Similar Messages
-
Help with encapsulation and a specific case of design
Hello all. I have been playing with Java (my first real language and first OOP language) for a couple months now. Right now I am trying to write my first real application, but I want to design it right and I am smashing my head against the wall with my data structure, specifically with encapsulation.
I go into detail about my app below, but it gets long so for those who don't want to read that far, let me just put these two questions up front:
1) How do principles of encapsulation change when members are complex objects rather than primitives? If the member objects themselves have only primitive members and show good encapsulation, does it make sense to pass a reference to them? Or does good encapsulation demand that I deep-clone all the way to the bottom of my data structure and pass only cloned objects through my top level accessors? Does the analysis change when the structure gets three or four levels deep? Don't DOM structures built of walkable nodes violate basic principles of encapsulation?
2) "Encapsulation" is sometimes used to mean no public members, othertimes to mean no public members AND no setter methods. The reasons for the first are obvious, but why go to the extreme of the latter? More importantly HOW do you go to the extreme of the latter? Would an "updatePrices" method that updates encapsulated member prices based on calculations, taking a single argument of say the time of year be considered a "setter" method that violates the stricter vision of encapsulation?
Even help with just those two questions would be great. For the masochistic, on to my app... The present code is at
http://www.immortalcoil.org/drake/Code.zip
The most basic form of the application is statistics driven flash card software for Japanese Kanji (Chinese characters). For those who do not know, these are ideographic characters that represent concepts rather than sounds. There are a few thousand. In abstract terms, my data structure needs to represent the following.
- There are a bunch of kanji.
Each kanji is defined by:
- a single character (the kanji itself); and
- multiple readings which fall into two categories of "on" and "kun".
Each reading is defined by:
- A string of hiragana or katakana (Japanese phoenetic characters); and
- Statistics that I keep to represent knowledge of that reading/kanji pair.Ideally the structure should be extensible. Later I might want to add statistics associated with the character itself rather than individual readings, for example. Right now I am thinking of building a data structure like so:
- A Vector that holds:
- custom KanjiEntry objects that each hold
- a kanji in a primitive char value; and
- two (on, kun) arrays or Vectors of custom Reading objects that hold
- the reading in a String; and
- statistics of some sort, probably in primitive valuesFirst of all, is this approach sensible in the rough outlines?
Now, I need to be able to do the obvious things... save to and load from file, generate tables and views, and edit values. The quesiton of editting values raises the questions I identified above as (1) and (2). Say I want to pull up a reading, quiz the user on it, and update its statistics based on whether the user got it right or wrong. I could do all this through the KanjiEntry object with a setter method that takes a zillion arguments like:
theKanjiEntry.setStatistic(
"on", // which set of readings
2, // which element in that array or Vector
"score", // which statistic
98); // the valueOr I could pass a clone of the Reading object out, work with that, then tell the KanjiEntry to replace the original with my modified clone.
My instincts balk at the first approach, and a little at the second. Doesn't it make more sense to work with a reference to the Reading object? Or is that bad encapsulation?
A second point. When running flash cards, I do not care about the subtlties of the structure, like whether a reading is an on or a kun (although this is important when browsing a table representing the entire structure). All I really care about is kanij/reading pairings. And I should be able to quickly poll the Reading objects to see which ones need quizzing the most, based on their statistics. I was thinking of making a nice neat Hashtable with the keys being the kanji characters in Strings (not the KanjiEntry objects) and the values being the Reading objects. The result would be two indeces to the Reading objects... the basic structure and my ad hoc hashtable for runninq quizzes. Then I would just make sure that they stay in sync in terms of the higher level structure (like if a whole new KanjiEntry got added). Is this bad form, or even downright dangerous?
Apart from good form, the other consideration bouncing around in my head is that if I get all crazy with deep cloning and filling the bottom level guys with instance methods then this puppy is going to get bloated or lag when there are several thousand kanji in memory at once.
Any help would be appreciated.
DrakeUsually by better design. Move methods that use the
getters inside the class that actually has the data....
As a basic rule of thumb:
The one who has the data is the one using it. If
another class needs that data, wonder what for and
consider moving that operation away from that class.
Or move from pull to push: instead of A getting
something from B, have B give it to A as a method
call argument.Thanks for the response. I think I see what you are saying.. in my case it is something like this.
Solution 1 (disfavored):
public class kanjiDrill{ // a chunk of Swing GUI or something
public void runDrill(Vector kanjiEntries){
KanjiEntry currentKanjiEntry = kanjiEntries.elementAt(0); // except really I will pick one randomly
char theKanji = currentKanjiEntry.getKanji();
String theReading = currentKanjiEntry.getReading();
// build and show a flashcard based on theKanji and theReading
// use a setter to change currentKanji's data based on whether the user answers correctly;
}Solution 2 (favored):
public class kanjiDrill{ // a chunk of Swing GUI or something
public void runDrill(Vector kanjiEntries){
KanjiEntry currentKanjiEntry = kanjiEntries.elementAt(0); // except really I will pick one randomly
currentKanji.buildAndShowFlashcard(); // method includes updating stats
}I can definitely see the advantages to this, but two potential reasons to think hard about it occur to me right away. First, if this process is carried out to a sufficient extreme the objects that hold my data end up sucking in all the functionality of my program and my objects stop resembling natural concepts.
In your shopping example, say you want to generate price tags for the items. The price tags can be generated with ONLY the raw price, because we do not want the VAT on them. They are simple GIF graphics that have the price printed on a an irregular polygon. Should all that graphics generating code really go into the item objects, or should we just get the price out of the object with a simple getter method and then make the tags?
My second concern is that the more instance methods I put into my bottom level data objects the bigger they get, and I intend to have thousands of these things in memory. Is there a balance to strike at some point?
It's not really a setter. Outsiders are not setting
the items price - it's rather updating its own price
given an argument. This is exactly how it should be,
see my above point. A breach of encapsulation would
be: another object gets the item price, re-calculates
it using a date it knows, and sets the price again.
You can see yourself that pushing the date into the
item's method is much beter than breaching
encapsulation and getting and setting the price.So the point is not "don't allow access to the members" (which after all you are still doing, albeit less directly) so much as "make sure that any functionality implicated in working with the members is handled within the object," right? Take your shopping example. Say we live in a country where there is no VAT and the app will never be used internationally. Then we would resort to a simple setter/getter scheme, right? Or is the answer that if the object really is pure data are almost so, then it should be turned into a standard java.util collection instead of a custom class?
Thanks for the help.
Drake -
[svn] 4028: Bug: Draining of buffered messages doesn' t work correctly with long-polling.
Revision: 4028
Author: [email protected]
Date: 2008-11-06 09:04:26 -0800 (Thu, 06 Nov 2008)
Log Message:
Bug: Draining of buffered messages doesn't work correctly with long-polling.
QA: Yes - please make sure both nio and regular long-polling channels work with throttling.
Doc: No
Checkintests: Pass.
Details: Made sure that buffered messages are drained properly with all polling channels (polling, long-polling, and nio-long-polling).
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.javaSounds like you've probably already looked but the CUPS article in the wiki led me through setting up a printer without any problems. http://wiki.archlinux.org/index.php/CUPS
The first section describes how to troubleshoot CUPS and printing problems.
I've also found a few other posts and links that may help.
http://hplipopensource.com/hplip-web/mo … eries.html
http://ubuntuforums.org/showthread.php?t=419163
Hope this helps! -
Servlet to applet communication: with out polling
hi,
i need to write an applet which captures the realtime data as it appears in the server. Is this possible with out polling ther server at constant intervals? i.e... is it possible for the server to push data to an applet (say applet first registers etc etc with the server)
One more thing..say applet had opened a connection with server and opened a stream. Now is it possible for it to keep listening over the connection so that server puts the info over the connection when ever it has it and the client displays the info when ever it receives it.
Any pointers would be helpful.[email protected] wrote:
hi,
i need to write an applet which captures the realtime data as it appears in the server. Is this possible with out polling ther server at constant intervals? i.e... is it possible for the server to push data to an applet (say applet first registers etc etc with the server)sure it's possible
One more thing..say applet had opened a connection with server and opened a stream. Now is it possible for it to keep listening over the connection so that server puts the info over the connection when ever it has it and the client displays the info when ever it receives it.
Any pointers would be helpful.i'm not sure what the best way is, but I've done it with Sockets and ObjectOutputStream -
Help with if statement in cursor and for loop to get output
I have the following cursor and and want to use if else statement to get the output. The cursor is working fine. What i need help with is how to use and if else statement to only get the folderrsn that have not been updated in the last 30 days. If you look at the talbe below my select statement is showing folderrs 291631 was updated only 4 days ago and folderrsn 322160 was also updated 4 days ago.
I do not want these two to appear in my result set. So i need to use if else so that my result only shows all folderrsn that havenot been updated in the last 30 days.
Here is my cursor:
/*Cursor for Email procedure. It is working Shows userid and the string
You need to update these folders*/
DECLARE
a_user varchar2(200) := null;
v_assigneduser varchar2(20);
v_folderrsn varchar2(200);
v_emailaddress varchar2(60);
v_subject varchar2(200);
Cursor c IS
SELECT assigneduser, vu.emailaddress, f.folderrsn, trunc(f.indate) AS "IN DATE",
MAX (trunc(fpa.attemptdate)) AS "LAST UPDATE",
trunc(sysdate) - MAX (trunc(fpa.attemptdate)) AS "DAYS PAST"
--MAX (TRUNC (fpa.attemptdate)) - TRUNC (f.indate) AS "NUMBER OF DAYS"
FROM folder f, folderprocess fp, validuser vu, folderprocessattempt fpa
WHERE f.foldertype = 'HJ'
AND f.statuscode NOT IN (20, 40)
AND f.folderrsn = fp.folderrsn
AND fp.processrsn = fpa.processrsn
AND vu.userid = fp.assigneduser
AND vu.statuscode = 1
GROUP BY assigneduser, vu.emailaddress, f.folderrsn, f.indate
ORDER BY fp.assigneduser;
BEGIN
FOR c1 IN c LOOP
IF (c1.assigneduser = v_assigneduser) THEN
dbms_output.put_line(' ' || c1.folderrsn);
else
dbms_output.put(c1.assigneduser ||': ' || 'Overdue Folders:You need to update these folders: Folderrsn: '||c1.folderrsn);
END IF;
a_user := c1.assigneduser;
v_assigneduser := c1.assigneduser;
v_folderrsn := c1.folderrsn;
v_emailaddress := c1.emailaddress;
v_subject := 'Subject: Project for';
END LOOP;
END;
The reason I have included the folowing table is that I want you to see the output from the select statement. that way you can help me do the if statement in the above cursor so that the result will look like this:
emailaddress
Subject: 'Project for ' || V_email || 'not updated in the last 30 days'
v_folderrsn
v_folderrsn
etc
[email protected]......
Subject: 'Project for: ' Jim...'not updated in the last 30 days'
284087
292709
[email protected].....
Subject: 'Project for: ' Kim...'not updated in the last 30 days'
185083
190121
190132
190133
190159
190237
284109
286647
294631
322922
[email protected]....
Subject: 'Project for: Joe...'not updated in the last 30 days'
183332
183336
[email protected]......
Subject: 'Project for: Sam...'not updated in the last 30 days'
183876
183877
183879
183880
183881
183882
183883
183884
183886
183887
183888
This table is to shwo you the select statement output. I want to eliminnate the two days that that are less than 30 days since the last update in the last column.
Assigneduser....Email.........Folderrsn...........indate.............maxattemptdate...days past since last update
JIM......... jim@ aol.com.... 284087............. 9/28/2006.......10/5/2006...........690
JIM......... jim@ aol.com.... 292709............. 3/20/2007.......3/28/2007............516
KIM......... kim@ aol.com.... 185083............. 8/31/2004.......2/9/2006............. 928
KIM...........kim@ aol.com.... 190121............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190132............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190133............. 2/9/2006.........2/9/2006.............928
KIM...........kim@ aol.com.... 190159............. 2/13/2006.......2/14/2006............923
KIM...........kim@ aol.com.... 190237............. 2/23/2006.......2/23/2006............914
KIM...........kim@ aol.com.... 284109............. 9/28/2006.......9/28/2006............697
KIM...........kim@ aol.com.... 286647............. 11/7/2006.......12/5/2006............629
KIM...........kim@ aol.com.... 294631............. 4/2/2007.........3/4/2008.............174
KIM...........kim@ aol.com.... 322922............. 7/29/2008.......7/29/2008............27
JOE...........joe@ aol.com.... 183332............. 1/28/2004.......4/23/2004............1585
JOE...........joe@ aol.com.... 183336............. 1/28/2004.......3/9/2004.............1630
SAM...........sam@ aol.com....183876.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183877.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183879.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183880.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183881.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183882.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183883.............3/5/2004.........3/8/2004.............1631
SAM...........sam@ aol.com....183884.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183886.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183887.............3/5/2004.........3/8/2004............ 1631
SAM...........sam@ aol.com....183888.............3/5/2004.........3/8/2004............ 1631
PAT...........pat@ aol.com.....291630.............2/23/2007.......7/8/2008............ 48
PAT...........pat@ aol.com.....313990.............2/27/2008.......7/28/2008............28
NED...........ned@ aol.com.....190681.............4/4/2006........8/10/2006............746
NED...........ned@ aol.com......95467.............6/14/2006.......11/6/2006............658
NED...........ned@ aol.com......286688.............11/8/2006.......10/3/2007............327
NED...........ned@ aol.com.....291631.............2/23/2007.......8/21/2008............4
NED...........ned@ aol.com.....292111.............3/7/2007.........2/26/2008............181
NED...........ned@ aol.com.....292410.............3/15/2007.......7/22/2008............34
NED...........ned@ aol.com.....299410.............6/27/2007.......2/27/2008............180
NED...........ned@ aol.com.....303790.............9/19/2007.......9/19/2007............341
NED...........ned@ aol.com.....304268.............9/24/2007.......3/3/2008............ 175
NED...........ned@ aol.com.....308228.............12/6/2007.......12/6/2007............263
NED...........ned@ aol.com.....316689.............3/19/2008.......3/19/2008............159
NED...........ned@ aol.com.....316789.............3/20/2008.......3/20/2008............158
NED...........ned@ aol.com.....317528.............3/25/2008.......3/25/2008............153
NED...........ned@ aol.com.....321476.............6/4/2008.........6/17/2008............69
NED...........ned@ aol.com.....322160.............7/3/2008.........8/21/2008............4
MOE...........moe@ aol.com.....184169.............4/5/2004.......12/5/2006............629
[email protected]/27/2004.......3/8/2004............1631
How do I incorporate a if else statement in the above cursor so the two days less than 30 days since last update are not returned. I do not want to send email if the project have been updated within the last 30 days.
Edited by: user4653174 on Aug 25, 2008 2:40 PManalytical functions: http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/functions2a.htm#81409
CASE
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/02_funds.htm#36899
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/04_struc.htm#5997
Incorporating either of these into your query should assist you in returning the desired results. -
I installed Sunbird in one computer and my calendar has all my infos, events, and task that i would like to see on another computer that i just downloaded Sunbird into. Also, is it possible I can access Sunbird on my iphone?
Thank you in advance,Try the forum here - http://forums.mozillazine.org/viewforum.php?f=46 - for help with Sunbird, this forum is for Firefox support.
-
Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance! -
Help with HP Laser Printer 1200se
HP Support Line,
Really need your assistance. I have tried both contacting HP by phone (told they no longer support our printer via phone help), the tech told me that I needed to contact HP by e-mail for assistance. I then sent an e-mail for assistance and got that reply today, the reply is as follows "Randall, unfortunately, HP does not offer support via e-mail for your product. However many resources are available on the HP web site that may provide the answer to your inquiry. Support is also available via telephone. A list of technical support numbers can be round at the following URL........." The phone numbers listed are the ones I called and the ones that told me I needed to contact the e-mail support for help.
So here I am looking for your help with my issue.
We just bought a new HP Pavillion Slimline Desk Top PC (as our 6 year old HP Pavillion PC died on us). We have 2 HP printers, one (an all-in-one type printer, used maily for copying and printing color, when needed) is connected and it is working fine with the exception of the scanning option (not supported by Windows 7). However we use our Laser Printer for all of our regular prining needs. This is the HP LaserPrinter 1200se, which is about 6 years old but works really well. For this printer we currently only have a parallel connection type cord and there is not a parallel port on the Slimline HP PC. The printer also has the option to connedt a USB cable (we do not currently have this type of cable).
We posed the following two questions:
1. Is the Laser Jet 1200se compatible with Windows 7?
and if this is the case
2. Can we purchase either a) a USC connection cord (generic or do we need a printer specific cord)? or b) is there there a printer cable converter adapater to attach to our parallel cable to convert to a USB connection?
We do not want to purchase the USB cable if Windows 7 will not accept the connection, or if doing this will harm the PC.
We really would appreciate any assitance that you might give us.
Thank you,
Randy and Leslie GibsonSorry, both cannot be enabled by design. That said, devices on a network do not care how others are connected. You can print from a wireless connection to a wired (Ethernet) printer and v/v.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Going to Australia and need help with Power converters
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.godzillafan868 wrote:
Facts:
US uses 110v on 60hz
Australia 220v on 50hz
Making sure I understood that correctly. Devices I plan on bringing that will use power are PS3 Slim, MacBook Pro 2008 model, and WD 1TB External HDD. My DS, and Cell are charging via USB to save trouble of other cables.
Ideas I've had or thought of:
1. Get a power converter for a US Powerstrip, and then plug in my US items into the strip and then the strip into an AUS Converter into Australian outlet. Not sure if this fixes the voltage/frequency change.
2. Get power converters for all my devices. But, not sure if my devices needs ways of lowering the voltage/increasing frequency or something to help with the adjustment.
3. Buy a universal powerstrip, which is extremely costly and I wouldn't be able to have here in time (I leave Thursday). Unless Best Buy carrys one.
Check the specs on input voltage/frequency of your power supplies.
Many laptop power supplies are "universal/global" and are specced something like 80-265 volts AC 50/60 Hz, but not all. These will just need a connector adapter.
Unsure about the PS3 Slim - if it isn't universal it could be difficult as you'll need a 110/220 transformer, one big enough (power-handling wise) for the PS3 will be very bulky.
For the external WD HDD, if it doesn't have a universal supply, you're probably best off just finding a new wallwart for it that is capable of running on 220/50.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies. -
Creation of context sensitive help with pure FM 12 usage doesn't work
Hi,
I hope somebody is able to help me with a good hint or tip.
I am trying to create a context-sensitive Microsoft Help with FM12 only using the abilities of FM (no RoboHelp). For some reasons, my assigned ID's are not used in the generated chm file and therefore the help does not work context-sensitively.
What did I do?
- I created my FM files and assigned topic aliases to the headers. I did this two ways: a) using the "Special" menue and assigning a CSH marker and/or b) setting a new marker of type "Topic Alias" and typing the ID. I used only numeric IDs like "2000" or "4200",
- I created a .h file (projectname.h) - based on the format of the file projectname_!Generated!.h (I read this in some instructions). So the .h file (text file) looks like this:
#define 2000 2000 /* 4 Anwendungsoberfläche */
#define 2022 2022 /* 4.1.1 Menü Datei */
#define 2030 2030 /* 4.1.3 Menü Parametersatz */
#define 2180 2180 /* 6.6.7 Objektdialog Q-Regler */
#define 2354 2354 /* 6.9.2 Objektdialog Extran Parameter */
#define 2560 2560 /* 6.9.5 Objektdialog Extran2D Parametersatz */
- I published the Microsoft HTML Help. A projectname_!Generated!.h has been created. My IDs were not used in this file:
#define 2000 1
#define 2022 2
#define 2030 3
#define 2180 4
#define 2354 5
#define 2560 6
- When I open the .chm file and look in the source code, the ID even is totally different. It is not the one, I assigned in FM, it is not the one which I assigned in the projectname.h file and it even is not the one, which was put in the projectname_!Generated!.h file. It is a generated name starting with CSH_1 ...n in a consecutive way numbered.
Example:
<p class="FM_Heading1"><a name="XREF_72066_13_Glossar"></a>Gloss<a name="CSH_1"></a>ar</p>
What goes wrong? Why does FM not take my assigned IDs? I need to use these IDs since our programmers are using those already - I had to re-create the whole online help but the programs stay untouched.
Please help!
Many thanks
MohiHi Jeff,
thanks for your note!
The text in my marker is just a number like "2000" or "4200". As said, I created manually a my.h file and used this marker there. E.g.
#define 2000 2000.
Whereby the first 2000 (in my opinion) is the marker text and the second 2000 is the context ID which the programmers are using for the context sensitive call of the help. My definitions in the my.h file were translated to #define 2000 1 (in the my_!Generated!.h file). The source code "translates" the context ID into CSH_8.
I am still confused :-/
Thanks
Mohi -
Need help with Boot Camp and Win 7
I have iMac 27" (iMac11,1) 2.8 GHz, quad core, 8MB of L3, 8GB of Memory, Boot ROM Version IM111.0034.B02 and SMC Version 1.54f36 and can't get this machine to run Windows 7 using Boot Camp. I have successfully loaded Win 7 but when it claims to be starting I only get a black screen after initial start up.
I have checked and rechecked my software updates and have read and reread the instructions, however, I can't update my Boot Camp to 3.1 (my machine says i'm running 3.0.4) and I need 3.1 but can't load 3.1 because it is an exe file that has to be loaded into Windows after I load Windows but can't open Windows because I can't load Boot Camp 3.1. That's my excuse anyway, so I'm missing something I just can't figure out what it is....this is where you come in!
Thanks.
MikeMike,
I'm not going to be much help with Boot Camp however I can direct you to the Boot Camp forum where there are more people that know how to troubleshoot it and Windoze 7. You can find it at:
https://discussions.apple.com/community/windows_software/boot_camp
Roger -
Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge
can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found
That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum] -
Be grateful for your help with Photoshop Elements which I have been using for several years.
Be grateful for your help with Photoshop Elements which I have been using for several years. Does Elements need to have access to ‘My Pictures’ on Windows as when I remove Photos from ‘My Pictures’, Elements later, when backing up, gives a message that it is unable to ‘reconnect’ to the same picture on elements. On other occasions when removing a photo from Elements catalogue I also get a similar message when backing up saying ‘unable to reconnect’. 1. Is there a relationship between Elements and My Pictures and is Elements dependant on the Windows ‘My Pictures’? 2. Why does some photos in Elements in some cases cause them to multiply e.g. double; triple; quadruple; and on occasions even more? Is there something I need to do to stop this or an easy way I can remove the multiples without spending hours doing it manually one by one? Am I doing something wrong? My O/S is Windows XP SP2 and windows Vista on my Laptop. I have been using Elements 5 and have just purchased Photoshop Elements 8.0. (Upgrade) and about to install it. Be grateful for any advice as I do enjoy using the program if only I can resolve this issue. I am not a PC wiz and mainly use Elements to catalogue photos from which I compile collections and from them slide shows with music. Any advice appreciated Sonny.t PS Have tried to post this previously but without success so hoping to see message appear and a +response
The organizer doesn't care where you send your photos when you download them via the downloader or where they happen to be when you first bring them in if you use the Get Photos command, but once your pics are in the Organizer, you *must* move them from within organizer or it can't find them. You don't have to use My Pictures at all if you don't want to, but regardless of the folder where you put your photos, if you want them someplace else, you use organizer to do it.
-
Query Help with Parent, Child, Child's Child
Hi all,
Need some help with a query. I'm trying to create a stored procedure that is sort of like a Customer, Order, Order, Details. In my situation the tables are different but nevertheless, I want to grab all the fields from the Parent, Child,
and Childs' Child, where the Parent.ParentID = @Parameter. I tried this:
CREATE PROCEDURE [dbo].[spGetCompleteProjectXML]
@ProjectID int = 0
AS
SELECT *,
(SELECT *,
(SELECT *
FROM PageControls
WHERE (PageControls.ProjectPageID = ProjectPages.ProjectPageID))
FROM ProjectPages
WHERE (ProjectPages.ProjectID = @ProjectID))
FROM Projects
WHERE (ProjectID = @ProjectID)
FOR XML AUTO, ELEMENTS
RETURN 0
I think I'm close, but it was my best effort. Could someone help?
thanks in advanceHi TPolo,
Regarding your description, are you looking for a sample like below?
CREATE TABLE customer(customerID INT, name VARCHAR(99))
INSERT INTO customer VALUES(1,'Eric')
INSERT INTO customer VALUES(2,'Nelson')
CREATE TABLE orders(orderID INT,customerID INT)
INSERT INTO orders VALUES(1,1);
INSERT INTO orders VALUES(2,1)
INSERT INTO orders VALUES(3,2)
INSERT INTO orders VALUES(4,2)
CREATE TABLE orderDetails(orderID INT,item VARCHAR(99))
INSERT INTO orderDetails VALUES(1,'APPLE1')
INSERT INTO orderDetails VALUES(1,'BANANA1')
INSERT INTO orderDetails VALUES(2,'APPLE2')
INSERT INTO orderDetails VALUES(2,'BANANA2')
INSERT INTO orderDetails VALUES(3,'APPLE3')
INSERT INTO orderDetails VALUES(3,'BANANA3')
INSERT INTO orderDetails VALUES(4,'APPLE4')
INSERT INTO orderDetails VALUES(4,'BANANA5')
SELECT customer.customerID,customer.name,
(SELECT orderId,
SELECT item FROM orderDetails WHERE orderID=orders.orderID FOR XML AUTO,TYPE,ELEMENTS
FROM orders Where customerID=customer.customerID FOR XML AUTO,TYPE,ELEMENTS)
FROM customer WHERE customerID=1
FOR XML AUTO,ELEMENTS
DROP TABLE customer,orderDetails,orders
If you have any feedback on our support, please click
here.
Eric Zhang
TechNet Community Support -
Hi Gurus,
Can someone please help me out.
I've a below tables.
1) tbl_link --> this table contains information at profile level
2) tbl_summary --> this table contains summary at parent profile level derived from tbl_link table
One parent profile contains multiple child profiles and each child profile links to a code (which is B, W, G or P) and the code is linked to a category (i.e. ONL and OFL). In this case code B is linked to category 'ONL' and codes W,G,P linked to OFL category.
ONL category needs 100 points. If it don't have enough points then i need to borrow from OFL category which i'm doing and populating into tbl_summary table at parent profile level.
Now i need to insert data into tbl_link table at profile level with howmany points used, expired based on tbl_summary table. Rule is at the end of month if we add points for each profile in tbl_link table it should come as 0.
with
tbl_SUMMARY as
select 1 as ppid,'ONL' as catgcode, 53 as earned_points,47 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
union
select 1 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,176 CERT_POINTS,76 DISCARD_POINTS,100 used from dual
union
select 2 as ppid,'ONL' as catgcode, 39 as earned_points,61 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
union
select 2 as ppid,'OFL' as catgcode, 90 as earned_points,0 BORROWED_POINTS,29 CERT_POINTS,29 DISCARD_POINTS,100 used from dual
union
select 3 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
union
select 3 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,223 CERT_POINTS,23 DISCARD_POINTS,200 used from dual
union
select 4 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
union
select 4 as ppid,'OFL' as catgcode, 169 as earned_points,0 BORROWED_POINTS,169 CERT_POINTS,69 DISCARD_POINTS,100 used from dual
tbl_link as
select 1 as ppid,1 as pid, 'B' as code,'ONL' as catgcode, 53 as earned_points from dual
union
select 1 as ppid,12 as pid, 'W' as code,'OFL' as catgcode, 26 as earned_points from dual
union
select 1 as ppid,13 as pid, 'G' as code,'OFL' as catgcode, 87 as earned_points from dual
union
select 1 as ppid,14 as pid, 'P' as code,'OFL' as catgcode, 110 as earned_points from dual
union
select 2 as ppid,2 as pid, 'B' as code,'ONL' as catgcode, 39 as earned_points from dual
union
select 2 as ppid,22 as pid, 'W' ,'OFL' as catgcode, 30 as earned_points from dual
union
select 2 as ppid,23 as pid, 'G' ,'OFL' as catgcode, 29 as earned_points from dual
union
select 2 as ppid,24 as pid, 'P' ,'OFL' as catgcode, 31 as earned_points from dual
union
select 3 as ppid,3 as pid, 'B' as code,'ONL' as tier_catgcode, 109 as earned_points from dual
union
select 3 as ppid,32 as pid, 'W' ,'OFL' , 26 as earned_points from dual
union
select 3 as ppid,33 as pid, 'G' ,'OFL', 87 as earned_points from dual
union
select 3 as ppid,34 as pid, 'P' ,'OFL' , 110 as earned_points from dual
union
select 4 as ppid,4 as pid, 'B' as code,'ONL' as catgcode, 109 as earned_points from dual
union
select 4 as ppid,42 as pid, 'W' as code,'OFL' , 26 as earned_points from dual
union
select 4 as ppid,43 as pid, 'G' as code,'OFL' , 87 as earned_points from dual
union
select 4 as ppid,44 as pid, 'P' as code,'OFL' , 56 as earned_points from dual
final (PARENT_PROFILE_ID,PROFILE_ID,catgcode,EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED)
as (
select A.PPID PARENT_PROFILE_ID,B.PID PROFILE_ID,A.catgcode,B.EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED
from tbl_SUMMARY a,tbl_link b where a.ppid=b.ppid AND A.catgcode=B.catgcode
ORDER BY PROFILE_ID
select * from final order by 1;
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED
1 1 ONL 53 47 100 0 100
1 14 OFL 110 0 176 76 100
1 13 OFL 87 0 176 76 100
1 12 OFL 26 0 176 76 100
2 2 ONL 39 61 100 0 100
2 24 OFL 31 0 29 29 100
2 23 OFL 29 0 29 29 100
2 22 OFL 30 0 29 29 100
3 32 OFL 26 0 223 23 200
3 33 OFL 87 0 223 23 200
3 34 OFL 110 0 223 23 200
3 3 ONL 109 0 109 9 100
4 42 OFL 26 0 169 69 100
4 43 OFL 87 0 169 69 100
4 44 OFL 56 0 169 69 100
4 4 ONL 109 0 109 9 100
Need Output as below :
For parent profile 1, whatever i mentioned above is not correct. Borrowed 47 points from OFL to ONL to make ONL and also from OFL category has 176 points remaining after lending to ONL and using only 100 points, remaining 76 points are discarded. Need to deduct these 76 points also from child profiles. Output will be as below.
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
1 1 ONL 53 47 100 0 100 -53 0
1 12 OFL 26 0 176 76 100 -26 0
1 13 OFL 87 0 176 76 100 -74 -13
1 14 OFL 110 0 176 76 100 -47 -63
For parent profile id 2 --> ONL category has 39 points, so borrowed 61 points from OFL category to make ONL points 100.
Now need to populate tbl_link table at child profile level (i.e. child profiles 22,23,24).
Borrowed 61 points from OFL and need to deduct this points from the profile which has highest earned points, in this case deduct from profile 24 which has 31 points, from profile 22 which has 30 points. Need output like below
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
2 2 ONL 39 61 100 0 100 -39 0
2 22 OFL 30 0 29 29 100 -30 0
2 23 OFL 29 0 29 29 100 0 -29
2 24 OFL 31 0 29 29 100 -31 0
For parent profile id 3 --> ONL category has 109 points, so no need to borrow points from OFL category
Now need to populate tbl_link table at child profile level (i.e. child profiles 32,33,34).
in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 223 points total. need only 200 points (i.e. mutiple of 100) for our process, 23 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 34. Output :
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
3 3 ONL 109 0 109 9 100 -100 -9
3 32 OFL 26 0 223 23 200 -26 0
3 33 OFL 87 0 223 23 200 -87 0
3 34 OFL 110 0 223 23 200 -87 -23
For parent profile id 4 --> ONL category has 109 points, so no need to borrow points from OFL category
Now need to populate tbl_link table at child profile level (i.e. child profiles 42,43,44).
in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 169 points total. need only 100 points (i.e. mutiple of 100) for our process, 69 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 43. Output :
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
4 4 ONL 109 0 109 9 100 100 9
4 42 OFL 26 0 169 69 100 -26 0
4 43 OFL 87 0 169 69 100 -18 -69
4 44 OFL 56 0 169 69 100 -56 0
Can someone help with the query. I googled about looping in sql and came to know that Oracle has a feature MODEL to loop in SQL, but i don't have idea on using MODEL clause.
Appreciate your help!
Thanks
SriHi Gurus,
Can someone please help me out.
I've a below tables.
1) tbl_link --> this table contains information at profile level
2) tbl_summary --> this table contains summary at parent profile level derived from tbl_link table
One parent profile contains multiple child profiles and each child profile links to a code (which is B, W, G or P) and the code is linked to a category (i.e. ONL and OFL). In this case code B is linked to category 'ONL' and codes W,G,P linked to OFL category.
ONL category needs 100 points. If it don't have enough points then i need to borrow from OFL category which i'm doing and populating into tbl_summary table at parent profile level.
Now i need to insert data into tbl_link table at profile level with howmany points used, expired based on tbl_summary table. Rule is at the end of month if we add points for each profile in tbl_link table it should come as 0.
with
tbl_SUMMARY as
select 1 as ppid,'ONL' as catgcode, 53 as earned_points,47 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
union
select 1 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,176 CERT_POINTS,76 DISCARD_POINTS,100 used from dual
union
select 2 as ppid,'ONL' as catgcode, 39 as earned_points,61 BORROWED_POINTS,100 CERT_POINTS,0 DISCARD_POINTS,100 used from dual
union
select 2 as ppid,'OFL' as catgcode, 90 as earned_points,0 BORROWED_POINTS,29 CERT_POINTS,29 DISCARD_POINTS,100 used from dual
union
select 3 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
union
select 3 as ppid,'OFL' as catgcode, 223 as earned_points,0 BORROWED_POINTS,223 CERT_POINTS,23 DISCARD_POINTS,200 used from dual
union
select 4 as ppid,'ONL' as catgcode, 109 as earned_points,0 BORROWED_POINTS,109 CERT_POINTS,9 DISCARD_POINTS,100 used from dual
union
select 4 as ppid,'OFL' as catgcode, 169 as earned_points,0 BORROWED_POINTS,169 CERT_POINTS,69 DISCARD_POINTS,100 used from dual
tbl_link as
select 1 as ppid,1 as pid, 'B' as code,'ONL' as catgcode, 53 as earned_points from dual
union
select 1 as ppid,12 as pid, 'W' as code,'OFL' as catgcode, 26 as earned_points from dual
union
select 1 as ppid,13 as pid, 'G' as code,'OFL' as catgcode, 87 as earned_points from dual
union
select 1 as ppid,14 as pid, 'P' as code,'OFL' as catgcode, 110 as earned_points from dual
union
select 2 as ppid,2 as pid, 'B' as code,'ONL' as catgcode, 39 as earned_points from dual
union
select 2 as ppid,22 as pid, 'W' ,'OFL' as catgcode, 30 as earned_points from dual
union
select 2 as ppid,23 as pid, 'G' ,'OFL' as catgcode, 29 as earned_points from dual
union
select 2 as ppid,24 as pid, 'P' ,'OFL' as catgcode, 31 as earned_points from dual
union
select 3 as ppid,3 as pid, 'B' as code,'ONL' as tier_catgcode, 109 as earned_points from dual
union
select 3 as ppid,32 as pid, 'W' ,'OFL' , 26 as earned_points from dual
union
select 3 as ppid,33 as pid, 'G' ,'OFL', 87 as earned_points from dual
union
select 3 as ppid,34 as pid, 'P' ,'OFL' , 110 as earned_points from dual
union
select 4 as ppid,4 as pid, 'B' as code,'ONL' as catgcode, 109 as earned_points from dual
union
select 4 as ppid,42 as pid, 'W' as code,'OFL' , 26 as earned_points from dual
union
select 4 as ppid,43 as pid, 'G' as code,'OFL' , 87 as earned_points from dual
union
select 4 as ppid,44 as pid, 'P' as code,'OFL' , 56 as earned_points from dual
final (PARENT_PROFILE_ID,PROFILE_ID,catgcode,EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED)
as (
select A.PPID PARENT_PROFILE_ID,B.PID PROFILE_ID,A.catgcode,B.EARNED_POINTS,BORROWED_POINTS,CERT_POINTS,DISCARD_POINTS,USED
from tbl_SUMMARY a,tbl_link b where a.ppid=b.ppid AND A.catgcode=B.catgcode
ORDER BY PROFILE_ID
select * from final order by 1;
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED
1 1 ONL 53 47 100 0 100
1 14 OFL 110 0 176 76 100
1 13 OFL 87 0 176 76 100
1 12 OFL 26 0 176 76 100
2 2 ONL 39 61 100 0 100
2 24 OFL 31 0 29 29 100
2 23 OFL 29 0 29 29 100
2 22 OFL 30 0 29 29 100
3 32 OFL 26 0 223 23 200
3 33 OFL 87 0 223 23 200
3 34 OFL 110 0 223 23 200
3 3 ONL 109 0 109 9 100
4 42 OFL 26 0 169 69 100
4 43 OFL 87 0 169 69 100
4 44 OFL 56 0 169 69 100
4 4 ONL 109 0 109 9 100
Need Output as below :
For parent profile 1, whatever i mentioned above is not correct. Borrowed 47 points from OFL to ONL to make ONL and also from OFL category has 176 points remaining after lending to ONL and using only 100 points, remaining 76 points are discarded. Need to deduct these 76 points also from child profiles. Output will be as below.
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
1 1 ONL 53 47 100 0 100 -53 0
1 12 OFL 26 0 176 76 100 -26 0
1 13 OFL 87 0 176 76 100 -74 -13
1 14 OFL 110 0 176 76 100 -47 -63
For parent profile id 2 --> ONL category has 39 points, so borrowed 61 points from OFL category to make ONL points 100.
Now need to populate tbl_link table at child profile level (i.e. child profiles 22,23,24).
Borrowed 61 points from OFL and need to deduct this points from the profile which has highest earned points, in this case deduct from profile 24 which has 31 points, from profile 22 which has 30 points. Need output like below
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
2 2 ONL 39 61 100 0 100 -39 0
2 22 OFL 30 0 29 29 100 -30 0
2 23 OFL 29 0 29 29 100 0 -29
2 24 OFL 31 0 29 29 100 -31 0
For parent profile id 3 --> ONL category has 109 points, so no need to borrow points from OFL category
Now need to populate tbl_link table at child profile level (i.e. child profiles 32,33,34).
in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 223 points total. need only 200 points (i.e. mutiple of 100) for our process, 23 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 34. Output :
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
3 3 ONL 109 0 109 9 100 -100 -9
3 32 OFL 26 0 223 23 200 -26 0
3 33 OFL 87 0 223 23 200 -87 0
3 34 OFL 110 0 223 23 200 -87 -23
For parent profile id 4 --> ONL category has 109 points, so no need to borrow points from OFL category
Now need to populate tbl_link table at child profile level (i.e. child profiles 42,43,44).
in this case ONL has 100 points, so move the remaining 9 points will be expired. OFL category has 169 points total. need only 100 points (i.e. mutiple of 100) for our process, 69 points will be expired and has to deduct from the profile which has highest earned points, in this case from profile 43. Output :
PARENT_PROFILE_ID PROFILE_ID CATGCODE EARNED_POINTS BORROWED_POINTS CERT_POINTS DISCARD_POINTS USED BURN_PTS EXPIRE_PTS
4 4 ONL 109 0 109 9 100 100 9
4 42 OFL 26 0 169 69 100 -26 0
4 43 OFL 87 0 169 69 100 -18 -69
4 44 OFL 56 0 169 69 100 -56 0
Can someone help with the query. I googled about looping in sql and came to know that Oracle has a feature MODEL to loop in SQL, but i don't have idea on using MODEL clause.
Appreciate your help!
Thanks
Sri
Maybe you are looking for
-
HOW TO RUN ADOBE READER IN MACBOOK PRO
HOW TO RUN ADOBE READER IN MACBOOK PRO
-
Can not view monitor values in the management portal
hi in the last 3 days when trying to view the monitoring values on cash we receive the following error The server could not retrieve metrics (Internal Server Error). we can not see the usage values . is there an alternative method to see the numbers
-
I recently installed iphoto 6. Previously when I imported photos they were automatically dated the date I imported them. Now the import date on all imports is January 1, 2003. It is a hastle to redate every roll I import. What can I do? G4 Mac OS X
-
Extending inner [nested] classes
OK I've got a class (A) with a nested class (B). B accesses variables etc. in A and does its own thing, but what I'd like to do is make B abstract and have a number of classes extend it - which is used depends on program arguments. The problem I'm ha
-
I keep attempting to download the latest version of iTunes and am getting an error...
I have attempted numerous times to download the latest version of iTunes. Once it's in the installer it will error out and give me this message - "There is a problem with this Windows Installer package. A program run as part of the setup did not fi