Help with Privacy settings please

I have added my Home phone number to my contacts.
If I set Privacy to "Allow calls from Anyone to my Skype Number" and "block calls when phone number is hidden", then I can receive calls from Home OK. And it recognises the number as Home (it tells me one missed call from Home for instance)
BUT: if I set privacy to "only receive calls from numbers in my Contacts" then Skype rejects calls from my Home number (it rings once then gives the busy signal).
Can anyone help please - I am stumped since Skype recognises my Home as a Contact, the number is not hidden, but Skype will not accept the calls if Privay is set to Only receive calls from Contacts.
Solved!
Go to Solution.

Try to reset Skype Settings
http://community.skype.com/t5/Windows/Skype-auto-l​ogs-off/m-p/938210/highlight/true#M69026
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Similar Messages

  • Help with video settings please! videos will not play but audio of the vid

    Hey..i have the 30GB ipod video. i have alot of music videos on there which are under the category movies on my ipod. i turned my ipod on about three weeks ago and none of the movies would play. they all appear as thumbnails. the thumbnails dont move but the audio of the movie does play. the thing that has happend is that somehow all my songs have come into the video playlist and i dont know how this has occured. i cannot plug my ipod to my computer as my computer no longer works. and if i plug it into my laptop then the songs and movies and photos will be earsed. i really want my videos to work again i just dont know how the settings have changed themselves.. is there any chance anybody knows how to get the videos to work again? if you require more information please let me know..the video settings are as follows: tv out - off, tv signal - PAL, widescreen - off. Also if i want to back up everything on my ipod how do i go abouts doing this so that i do not lose the data on it? thank you..chandni

    same sentiment of mine...
    my vids wont playu no more.. they're just stored in my music files..
    i want them all back!!
    pls help!!

  • Help with security settings please?

    I just downloaded HP 8500 wireless software and each time I start up the macair, i get an error message about an incorrect security setting. Where does one find this setting and change it?

    When you searched Google for "iPhone Error 21" what did you find?

  • WRT310N: Help with DMZ/settings (firmware 1.0.09) for wired connection

    Hello. I have a WRT310N and have been having a somewhat difficult time with my xbox 360's connection. I have forwarded all the necessary ports (53, 80, 88, 3074) for it to run, and tried changing MTU and what-not.
    I don't know if I have DMZ setup incorrectly, or if it's my settings.
    Setup as follows:
    PCX2200 modem connected via ethernet to WRT310N. 
    The WRT310N has into ethernet port 1 a WAP54G, and then upstairs (so that my Mother's computer can get a strong signal) I have another WAP54G that I believe receives its signal from the downstairs 54G. 
    In the back of the WRT310N, I have my computer connected via ethernet port 3, and my Xbox 360 connected via ethernet port 4.
    Now, I first figured I just have so many connections tied to the router and that is the reason for being so slow. However, when I unplug all the other ethernet cords and nothing is connected wirelessly, except for my Xbox connected to ethernet port 4, it is still poor. Also, with everything connected (WAP54G and other devices wirelessly) I get on my PC and run a speedtest.  For the sake of advice, my speedtests I am running on my PC are (after 5 tests) averagely 8.5 Mbps download, and 1.00 Mbps upload, with a ping of  82ms.
    Here is an image of the results:
    http://www.speedtest.net][IMG]http://www.speedtest.net/result/721106714.png
    Let me add a little more detail of my (192.168.1.1) settings for WRT310N.
    For starters, my Father's IT guy at his workplace set up this WRT310N and WAP54G's. So some of these settings may be his doing. I just don't know which.
    "Setup" as Auto-configurations DHCP. I've added my Xbox's IP address to the DHCP reservation the IP of 192.168.1.104. This has (from what I've noticed) stayed the same for days.
    MTU: Auto, which stays at 1500 when I check under status.
    Advanced Routing: NAT routing enabled, Dynamic Routing disabled. 
    Security: Disabled SPI firewall, UNchecked these: Filter Anonymous Internet Requests, Multicast, and Internet NAT redirection.
    VPN passthrough: All 3 options are enabled (IPSec, PPTP, L2TP)
    Access Restrictions: None.
    Applications and Gaming: Single port forwarding has no entries. Port Range Forwarding I have the ports 53 UDP/TCP, 88 UDP, 3074 UDP/TCP, and 80 TCP forwarded to IP 192.168.1.104 enabled. (192.168.1.104 is the IP for my xbox connected via ethernet wired that is in DHCP reserved list)
    Port Range Triggering: It does not allow me to change anything in this page.
    DMZ: I have it Enabled. This is where I am a bit confused. It says "Source IP Address" and it has me select either "Any IP address" or to put entries to the XXX.XXX.XXX.XXX to XXX fields. I have selected use any IP address. Then the source IP area, it says "Destination:"  I can do either "IP address: 192.168.1.XXX" or "MAC address:" Also, under MAC Address, it says DHCP Client Table and I went there and saw my Xbox under the DHCP client list (It shows up only when the Xbox is on) and selected it.  
    Under QoS: WMM Enabled, No acknowledgement disabled.
    Internet Access Priority: Enabled. Upstream Bandwith I set it to Manual and put 6000 Kbps. I had it set on Auto before, but I changed it. I have no idea what to put there so I just put a higher number. 
    Then I added for Internet Access Priority a Medium Priority for Ethernet Port 4 (the port my xbox is plugged into).
    Administration: Management: Web utility access: I have checked HTTP, unchecked HTTPS.
    Web utility access via Wireless: Enabled. Remote Access: Disabled.
    UPnp: Enabled.
    Allow Users to Configure: Enabled.
    Allow users to Disable Internet Access: Enabled.
    Under Diagnostics, when I try and Ping test 192.168.1.104 (xbox when on and connected to LIVE), I get:
    PING 192.168.1.104 (192.168.1.104): 24 data bytes
    Request timed out.
    Request timed out.
    Request timed out.
    Request timed out.
    Request timed out.
    --- 192.168.1.104 data statistics ---
    5 Packets transmitted, 0 Packets received, 100% Packet loss
    Also, when I do Traceroute Test for my Xbox's IP, I just keep getting: 
    traceroute to 192.168.1.104 (192.168.1.104), 30 hops max, 40 byte packets
    1 * * * 192.168.1.1 Request timed out.
    2 * * * 192.168.1.1 Request timed out.
     As for the Wireless Settings, it is all on the default settings with Wi-Fi Protected setup Enabled.
    To add, I have tried connecting my modem directly to the Xbox and my connection is much improved. I have no difficulty getting the NAT open, for it seems my settings are working for that. Any help with these settings would be VERY much appreciated. 
    Message Edited by CroftBond on 02-18-2010 01:09 PM

    I own 2 of these routers (one is a spare) with the latest firmware and I have been having trouble with them for over a year.  In my case the connection speed goes to a crawl and the only way to get it back is to disable the SPI firewall.  Rebooting helps for a few minutes, but the problem returns.  All of the other fixes recommended on these forums did not help.  I found out the hard way that disabling the SPI Firewall also closes all open ports ignoring your port forwarding settings.  If you have SPI Firewall disabled, you will never be able to ping your IP from an external address.  Turn your SPI Firewall back on and test your Ping. 
    John

  • Help with access control please

    So I'm trying to set up my brother's PSP to the wirless network through MAC address timed access. What I want to do is make it so that he can only access it through certain times in the day. I'm having troubles with actually getting it to work. Everytime I set it up, the PSP only show's up as a DHCP client and not a Wireless client. I tried the option panel with the add wireless clients through the first try access. Could I get some help with this issue please? Thanks!

    Just to calm your fears... There is no conspiracy. If someone had an answer or a suggestion they would post it.

  • Need help with export settings...Please

    I am brand new to the camera I have but been using FCP for 6 years. The camera is a Panasonic HMC150 that records in the AVCHD codec. I have an Intel Imac 20 2.4 Ghz 4 gigs of ram. My audio/video settings for the sequence in FCP are as follows:
    Sequence pre set: Apple pro Res 422 1920-1080 60i 48khz (footage is 1080 60i)
    I Log and Transfer with no problem, edit no problem.
    My question is when I go to export the finished sequence to Idvd or DSP, what settings do I use?
    I have exported to quicktime movie file with "current settings" and I have had NO luck in compleely burning a DVD. Is this the correct setting? what is everyone else using? Any help would be greatly appreciated!

    DVD is standard definition. You have to compress your HD material to SD first. Crack open the manual for Compressor or DVDSP and you'll get loads of valuable info. The first 30 or so pages of the DVDSP manual are quite informative, and easy to read.

  • Help with privacy

    Hello. So my girlfriend and I, well actually just my girlfriend, are having a bit of a privacy problem with Skype. I'm not going to lie but we do use Skype for really really intimate video conversations since we're living far apart at the moment, if you know what I mean. Anyways, this isn't the first time but whenever we do, she gets all these loads of random IM's from random people talking dirty to her and asking her to video chat with them and even calling her. At first, we both thought it was a coincidence and they were just spam bots so I created a new account for her but earlier today, the same thing happened. Oddly enough, the timing was spot on. I had her privacy settings set to the most private; ie she can only receive IM's from contacts, receive calls from contacts, I put her gender as male, input nothing on the information details, etc. Anyways, how are they able to still contact her? Is Skype hacked? Can people see my cam? Please help.
    [I'm using a computer to Skype call my girlfriend on her phone.] 

    It seems that on some Android devices the privacy settings are still not set correctly. We are looking into this right now and hope to come up with a solution.
    Meanwhile please double check the privacy settings in your app's settings - best to do this while being logged in from a desktop computer (Windows, Mac, Linux).
    Follow the latest Skype Community News
    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • Help with Internet Settings for Blackberry Curve 8520 On Orange Pay-Monthly

    I need help with my internet settings I'm currently on Orange Pay-Monthly and have recently bought a second hand Blackberry Curve 8520 which is unlocked but used to be on 02! I don't have a clue on what to do or where to start all I know is in the top right hand corner where the signal bar is it says GPRS and WIFI ! I don't want WIFI as I don't have a wireless connection and would like to get the settings for my curve so I can browse the internet and go on Facebook etc and BBM!! I've clicked on the internet logo in the menu bar but it just say's hotspot browser.. but wont let me browse!! Some one please help me !! 

    Hey BaByPaW1990,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    You can get your APN settings from your network service provider, also make sure you have a BlackBerry data plan.  
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Issues with privacy settings

    I am getting a ridiculous amount of strange people contacting me, some of them vulgar, I tried to set all my settings to "Only Allow Contacts" but when I click save, the window closes and the settings dont change.  Unknown people are still contacting me.  How do I fix this?

    not certain of the logic behind this procedure, but it actually work in numerous similar cases. Just switch to offline status for at 5-10 seconds, then revert back to online. Then proceed in changing your privacy settings to desired options and the new settings should stick.  
    IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
    ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
    SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
    | skypefordummies.blogspot.com | 

  • Help with sequence settings in final cut for project with 2 different frame rates.

    I really need help with this one! I finished editing a wedding video and realized after exporting that it was filmed in two different frame rates. This has happened before but I converted the footage to match and fixed the problem. In this case, the footage is part 30fps and part 60fps. The majority of it was filmed in 30fps. I cannot convert the 60 to 30 without the slow motion effect which I do not need so I have to find a way to burn this to a DVD without it looking messed up! The video was shot with two Canon 7ds if that helps anything. The first sequence I set at 29.97 and exported as a quicktime movie and all the footage filmed in 60 looked perfect and the footage in 30 looked jittery. Then I tried the sequence at 59.97 and it switched. The footage filmed at 30 looked good and the 60 was cropped in. I am so confused! Any advice or suggestions would be greatly appreciated!!

    Thanks for your help Michael! The frame rates are 29.97 1920 x 1080 and 59.94 1280 x 720. I did a control click on the clips in final cut and viewed the item properties/format to find this info. The Canon 7d is a DSLR but we use it for video. As for my workflow, the first thing I do is import the footage onto my computer and then drag the clips into mpeg streamclip. I choose apple prores 422 and uncheck the interlaced box. Once this is done I import the .mov files into final cut. The sequence automatically sets itself to whatever clip I drag in first so it originally set as 29.97. When I finished editing wedding video, I export it to a quicktime movie and choose whatever settings match the sequence, in this case apple prores 422 1920 x 1080 30p. Once that is done I use iDVD to burn the discs.
    I knew something was wrong when I watched the quicktime movie and all the 30fps footage was jittery and most of the cross dissolves looked strange. That's when I figured out the footage was at two different frame rates. What I don't understand is why whatever the sequence is set at in final cut, the clips of the opposite frame rate look right but the clips set at the matching frame rate don't???

  • Help with display settings needed urgently

    Graphics and icons that are supposed to be round appear oval. For instance the Safari and App icons on the dock appear very oval. Logos on websites I've visited before and I know are round appear oval.
    I've tried all display settings and nothing helps. I'm a designer and this is causing a major hinderance. Everything appears condenced / squashed sideways. I'd be very grateful if someone could help with this.
    I've just purchased the laptop. I have been using Mac for a few years and I've always selected the "stretched" option from the Display settings which sorted out the problem completely. A circle looked a proper circle. But in this version the option is not available.
    Badly hoping someone can help with this.
    Thanks.
    Version Details - OS X Lion 10.7.4

    It sounds like you have selected an incorrect resolution.  For starters, are you talking about your Air's display or an external display?  You haven't said which Air you have.  If you have an 11" model, make sure your display resolution is set to 1366x768.  If you have a 13" model, it should be set to 1440x900.  These are the proper resolutions for the built in displays.  Chosing anything other than the referenced "native" display resolutions will result in distortions or clarity problems. 

  • Help with movie settings

    I thank you in advance for your help with this!
    My website address I have a question about is
    www.holyredeemernorthbend.org
    and I have a question about the movie section.
    I am using iWeb to build my church's website. All is well except the movie page. I have only one movie uploaded so far, my old site had 6, each between 6 and 10 megs. On the old site I used microsoft Frontpage. The videos, all in WMV format, worked flawlessly. They used to download in Windows media player, and played immediately, but now that I am using iWeb they have to download before watching, AND if it is a Mac owner visiting the site they have to have flip4mac installed as a Quicktime plugin. PC users can't see them at all.
    It's not a problem for me to export the videos in another format, I would just like some help with the most universally excepted settings. I don't care if it's Quicktime, Flash, or Windows Media. What would be best for most internet users? And, can you put a movie on an iWeb made site, that will load into Windows Media Player as an option to quicktime? That is to say if I were to give the viewer a choice.

    iWeb writes page code that forces the QuickTime browser plug-in be used. Since your file is:
    http://www.holyredeemernorthbend.org/HRWeb/Media/Father%20Kies.wmv in Windows Media Player format Mac visitors must have Flip for Mac (I don't use it) and PC users can't use QuickTime to view WMP files.
    You can use iWeb to make a "direct" link (link to file). When the viewer click the link they would be able to download the WMP file. This would allow PC visitors to use Media Player and Mac visitors use Flip for Mac or Windows Media Player for Mac.
    Since iWeb forces QuickTime formats you should convert from .wmv to .mov formats to make your work easier.

  • Help with PAL settings for Sequence

    Hi –
    I’m having some issues with a PAL project and need some help with the right sequence settings. I have 3 camera angles that are all PAL that I am trying to edit together in a multi-clip sequence and everytime I add anything to the timeline I am getting the red render bar. I've tried all different PAL settings but nothing is working. Here are the specs of the DV clips:
    Frame Size : 720 X 576
    Vid Rate – 25 FPS
    Compressor DV-PAL
    Data Rate – 6.9mb/sec
    Pixel Aspect – PAL – CCIR-601
    Audio 48Khz
    Aud Format – 32bit – Floating Point.

    From the menu bar: Final Cut Pro > Easy Setup. What setting is selected there?
    From the menu bar: Sequence > Settings. What setting is selected there?
    In both cases they should be set to DV PAL.

  • Help with FMLE Settings for Sports Broadcast

    Hello,
    I am in need of some help tweaking my settings in FMLE.  I put on various sports broadcasts, but one of my clients has limited bandwidth (avg ~2.5-3mbps upload).
    I'd like to keep the output pixel size at 640x360 so that it takes up our entire player and doesn't letter box it, but with the larger video size I sometimes run in to either buffering,or pixelated video depending on how the bandwidth is that particular day.   I'd like to stream between 800k-1000k.
    I am using VP6 codec and using an Osprey Card as my capture device.
    Some of my questions are:
    1) Should I capture my video bigger than 640x360 and have FMLE shrink it, or capture it at the same size I want to output it at?
    2) In the Format advanced encoder settings, What should I set as my keyframe, quality, and datarate window.  Ideally I would like to use keyframes every 1-2 seconds because I work with fast-paced video, but I know that sends a lot of extra data.  Same with Datarate Window.  Can someone help explain the significance of this one.
    3)Under the output panel, I am not currently using the auto adjust function.  Should I enable this when my bandwidth takes a hit?  If so, which is preferable, dropping frames or degrading quality? Any explanation wuold be very helpful.
    4)Should I deinterlace my video?  We have a 3-camera shoot using Canon XL2's and a DataVideo Switcher.  Everything is analog SD.
    I am able to drop by bitrate down to 600K and the stream does not buffer, but it starts to get pixelated.  I would think that 3mbps upload bandwidth is enough to stream at 800k.   Any help adjusting my settings to shapen the imagine would be greatly appreciated.
    Thanks.

    1) Should I capture my video bigger than 640x360 and have FMLE shrink it, or capture it at the same size I want to output it at?
    --> Always capture at the same size, unless the device/card doesn't support that size.
    2) In the Format advanced encoder settings, What should I set as my keyframe, quality, and datarate window.  Ideally I would like to use keyframes every 1-2 seconds because I work with fast-paced video, but I know that sends a lot of extra data.  Same with Datarate Window.  Can someone help explain the significance of this one.
    --> Data rate window is useful for unexpected source data that might not encode well within the specified bit-rates. For example, if you set data rate window to "tiny" and a complex frame (source data) arrives, then encoder will not allocate some extra bits to encode that frame in good quality. But if you set the window to huge, then that complex frame will be encoded in good quality by allocating more bits to it. So, basically, the "delta" around the specified bit-rate increases on moving from "tiny" to "huge" data rate window. Your output bit-rate will vary more in case of "huge" setting.
    3)Under the output panel, I am not currently using the auto adjust function.  Should I enable this when my bandwidth takes a hit?  If so, which is preferable, dropping frames or degrading quality? Any explanation wuold be very helpful.
    --> I can explain the difference between the 2 options and you can experiment with both and stick to one, which gives a better user experience under your bandwidth conditions.
    a. Once the auto-adjust feature triggers, Drop frames option will intelligently drop some frames. As a result of this, you might observe video stalling depending upon the severity of the bandwidth conditions.
    b. Once the auto-adjust feature triggers, Degrade quality option with a min. video bit-rate value of say 500 kbps will try to encode all the frames within this 500 kbps limit. As you are reducing the bit-rate from the original value of say 800 kbps, the quality is bound to degrade. If you check the "preserve per frame quality" option then the encoder will encode >=50% of the frames within the specified bit-rate of 500 kbps. As the no. of frames are less the per frame quality will be better than the previous case. There is a possiblity that even after degrading quality, the buffer is exceeding the given limit then the degrade quality option will automatically switch to the drop frames option.
    4)Should I deinterlace my video?  We have a 3-camera shoot using Canon XL2's and a DataVideo Switcher.  Everything is analog SD.
    --> Deinterlace option is only available for video sizes >= 640x480.
     

  • Help with photo albums Please

    Hi, i really need some help with my pictures, I've only got a very basic understanding of how my phone works and have somehow put a load of albums on my phone when i plugged it into the computer-I want to delete some of them off the phone but cannot work out how to do it, when i plug my phone in i can find the photo tab but cannot actually see the pictures and can't see any delete button!!! Please can someone help me, basic explanations would be gratefully recieved xxxx

    The photo sync is one way: computer to phone. To remove photos, synced to your phone, remove the check marks next to the albums/folders under the photos tab in itunes & hit the apply/sync button. They will be removed from your phone. You cannot delete photos that were synced to your phone, directly on your phone. The easiest way to manage photos synced to your phone is to create albums or folders on your computer. Move whatever photos you want on your phone into these albums/folders & then select them under the photos tab in itunes to sync to your phone. You can then remove or add photos to these various albums/folders on your computer & the itunes sync process will update your phone every time you sync.

Maybe you are looking for