Help with PS CS5 ISO install

error window reads "Installer failed to initialize. File not found"
I tried using Adope Support Advisor but it could not find the problem.
ty for any help
richard

Hi richardimsjr,
Please follow the mentioned steps:
Windows: Navigate to C/Program Files(X86)/Common Files/Adobe and look for OOBE and Caps and rename both.
Mac: Library/Application Support/Adobe and look for OOBE and Caps and rename both.
Try to install the software. If still the same issue then try downloading CS5 from the direct link : http://prodesigntools.com/all-adobe-cs5-direct-download-links.html .
Kindly follow the very important instructions before download.
Regards,
Romit Sinha

Similar Messages

How can i deinstall the rotten ADOBE HELP for Flash CS5 an install a new one (Mac OS X 10.6.8 )

My Flah Help can't download newer Versions and Ressources. So i can't use it. And i have to. And i paied for it.
So: How can i deinstall the rotten ADOBE HELP for Flash CS5 an install a new one (Mac OS X 10.6.8 )?

Do you receive an error message when trying to use the help files? What have you tried so far to resolve your difficulties?

Someone please help with Photoshop CS5 opening error

Everytime I try to open Photoshop CS5 on my Macbook Pro, it starts to load and then right after it says "Initializing panels..." it stops loading and an error message error pops up and says "Could not initialzie Photoshop because of a program error." I'm not sure at all what I did to cause this. I have Premire CS5 and After Effects CS5 also installed and those load and work perfectly fine. Photoshop just stopped working all of a sudden. Photoshop is running in 64 bit mode but i also tried to run it in 32 bit mode and that did not work either.
Thank you for anyone that helps.
Here are all my specs:
- Macbook Pro
- Mac OS X 10.5.8
- 8 GB RAM
- ~6 GB left of space on my harddrive
- Photoshop CS5 Version 12.0

xstatic606 wrote:
…- ~6 GB left of space on my harddriveæ
That is pathetic little disk space available.
Keep in mind that the OS must share that itty bitty space with Photoshop's Scratch Disk. As a point of reference, I keep a modest, dedicated 160-GB dedicated second internal drive for my Photoshop Scratch Disk alone.
xstatic606 wrote:
…Photoshop CS5 Version 12.0
You should be running Photoshop 12.0.2.
Wo Tai Lao Le
我太老了

Can you help with InDesign CS5 index problem?

   This is my first attept at creating an Index. I've pretty much tried everything I can think of to get this index to work properly. I think I might have made some fundamental errors in creating this document. I created a document and not a book. I placed 5 text files without linking them. I thought I could simply use the index panel and enter my words from the toc and front matter and InDesign would find all the occurences in the document. But when I ran the index I got the toc pg numbers and the index pg numbers only, i.e., Illumination vi-225 (p225 being the index pg). So far I have:
reentered all the index entries to using the "whole document" because I had originally chose "This page" for each entry - that didn't work
then I threaded the 5 text files thinking that might work - nope!
then I saved the file as a book and tried using that - that didn't work.
   And yes, I have searched the Adobe CS5 help books, videos, online sites, etc. I'm hoping it's something simple! I would truly appreciate any help with this. Thank you!
   Sue

You don't have any Shape layers, so you won't have any fill or stroke options. If you had a rectangle and line layer, you have either deleted them, or caused them to be rasterized. That would also remove any Fill and Stroke options from the Options bar.
The 'little camera' at the bottom of the Tool bar, is the Quick mask icon. Clicking on it toggles between standard and Quick mask modes, like you said. Clicking on it is exactly the same as hitting the q key. It has absolutely nothing to do with Shape layers.
What you need to do now, is regroup. What exactly are you trying to achieve, and what do you expect to see in your Workspace? You will have noticed that your workspace is context sensitive. It automatically changes according to what tools are selected, or what function you are using at any particular time.

I need urgent help with my macbook pro, installed a theme and now unable to open windows, please help !

Hello,
I installed a theme on OS X Lion that was actually made for snow leapor, because on a youtube video someone said it works with Lion too,
After installing it I got problems seeing close and minize icons.
And After reinstalling my Macbook pro, I am unable to open finder, Safari, Terminal etc.
I have tried to get help from several help forums, and tried changing files as described here
https://discussions.apple.com/thread/3256533?start=0&tstart=0
Theme was downloaded from here
http://www.fif7y.com/themes/sog/

Okay, it's both for your first question: When I import the songs to the library, the songs are not in the correct order as they were on the CD. And, in the process of my importing the songs, the library scrambles the songs in different sections of the library (I explain further below)
I don't know what you mean by "little triangle" pointing up or down. What's that got to do with the price of fish in China? lol
When I get the music in the library the songs come out sorted this way: 2 songs from CD 1 appear one section of the library, then 1 song from CD 2 appears in the next column, along with the album work. Then, I go down farther, and there's a few more of the songs from CD 1 in the next section. I go down again, and maybe 2 or 3 songs are in that column. Along with the artwork for that CD. Then I scroll down again in the library, and there's maybe 3 or 4 songs from CD 1 there. Get the picture? It keeps sorting the songs in that order. And yes, the CDs I was importing were compliation dance CDs, along with some from the same artist, like Barry Manilow.
I hope I answered the questions better so that you can help me Thanks in advance, Glenn

Help with Encore CS5 Error Message

When I try to load an Encore CS5 Project with Encore CS5 or CS5.5 I get this error message: Adobe Encore as encountered an error. [..\..\Src\Clip\VideoClip.cpp-276] I am running win 7 64x. Any help appreciated. -ed

As well as the below, right click the Encore icon and select Run as Administrator... which fixes several "odd" problems
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0

Need help with illustrator cs5

Hi everyone.....first time on a forum and hope someone can help. I am using illustrator cs5 on OSx snow leapard. I am designing wings, following a demo and when I get to the part where I am supposed to use the reflect tool, I come to grief. Firstly the reflect tool dialogue box has two windows in the options part.....patterns or objects. I am supposed to be able to uncheck these but they are greyed out and not changeable. Secondly when I try to reflect my wing, using the option key to copy as well, the program appears to turn my wing over and give me a view of what would be the back of the wing, not a reflection. My fella and I have spent some considerable time trying to figure out what the issue is but to no avail...........Hope someone can help ..........Josephine Star.

Josephine,
In the future, please try to title your threads with something meaningful. Titles like "help" or "need help with Illustrator" or "Beginner Question" are useless. Fairly all posts are about "help with Illustrator" and about 98% of them are from beginners.
function(){return A.apply(null,[this].concat($A(arguments)))}
why won't my reflect tool operate properly.....we have just spent another hour trying to sort it out.
Is your Reflect Tool not operating as shown in Illustrator's instructions (online Help)? If not, how is it behaving differently?
Have you looked at the instructions? If not, do you not think that spending over an hour while typing posts in an online forum, waiting for answers (which are as often incorrect as correct) for every little question you may have about Illustrator is a much less time-efficient way to learn the program than reading the provided documentation?
function(){return A.apply(null,[this].concat($A(arguments)))}
when I try to reflect my wing, using the option key to copy as well, the program appears to turn my wing over and give me a view of what would be the back of the wing, not a reflection
"A view of what would be the back" (i.e.; a mirror image) is what Reflect means in the context of Illustrator's Reflect tool. What did you expect different?
Clicking with the Reflect Tool while holding alt/opt(Windows/Mac) sets the center of transformation where you click and invokes the dialog. So, for example, if the object is bilaterally symetrical about its vertical axis (like an upward-pointing triangle), and you altClick its center and then click OK in the resulting dialog, there will be no difference, because the mirror image of such a triangle reflected across a vertical axis would be identical.
Unless it changed in CS5 (don't have it loaded on this laptop)--which I doubt, clicking Copy instead of OK in the dialog is what makes a reflected copy; not holding the alt/opt key.
If you...
1. Mousedown with the Reflect Tool
2. Press and hold Alt
3. Drag
...then you will reflect the object about the position where you mousedown, interactively (without invoking the dialog). While doing so, if you also add the Shift key before mouseup, the reflection will be a copy.
JET

Newbie - Help with Fireworks CS5 nav bar

I am new to Fireworks. I am using Fireworks CS5. I need help with creating navigation bars and menu. Any tutorial or tips is greatly appreciated.
Thank you.

You'll find a tutorial named "Create a basic navigation bar" in the Fireworks help files.

Help with 9iAS Infrastructure post-instalation

Hi,
Can anyone tell me where I'm going wrong with this? Having installed 9iAS infrastructure component (V9.0.2.0.1) on a Windows 2000 machine, everything seems to work fine. I can log in using the IAS_ADMIN password I have set up, start up all the services and run all the demos. However, once I reboot, I can no longer log in as IAS_ADMIN. It refuses to accept the password I have set up. Is there any post-installation stuff I have missed?
Thanks

Even I am having the same problem.
I am still struggling to get this right but in the meantime you can start from the following URL:
Re: Alter table doubts
All the best.
-Puneet

Need help with PS CS5 crashing while openinng specific document!

Good morning all, I am the network admin at my company, and i have a user expereicneing a strange issue. I do not know much about PS, other than how to install it, so i am at a loss to troublshoot this issue. Any help would be greatly appreciated.
Background: Computer is a Dell Precision 690 with 4GB RAM, running windows 7 pro x64 with SP1 (this was happening before SP1 was applied as well). Video card is nVidia Quadro NVS 285 . I have fully updated and patched everything i can find, including using the most up to date, and "performance" drivers from nVidia (neither driver solved the problem) for the video card. I could not find a partner certified driver for this partticular card. The software is Photoshop CS5 version Version: 12.0.3 (12.0.3x20101211 [20101211.r.1222 2010/12/11:02:00:00 cutoff; r branch]) x64.
I have another user, with the exact same computer, and exact same software (they were made form the same image) whom does not have this problem.
The issue: Basically, when opening this one particular image (from the users desktop) PS crashes and throws up the following error. Sometimes it will actually display the image, then crash as soon as you try to even so much as click anywhere on the image. Other times it conks out before the image is even displayed.
Problem signature:
Problem Event Name:     APPCRASH
Application Name:     Photoshop.exe
Application Version:     12.0.3.0
Application Timestamp:     4d035d7d
Fault Module Name:     CoolType.dll
Fault Module Version:     5.7.83.10783
Fault Module Timestamp:     4cab0d45
Exception Code:     c0000005
Exception Offset:     0000000000033a38
OS Version:     6.1.7601.2.1.0.256.48
Locale ID:     1033
Additional Information 1:     3a1d
Additional Information 2:     3a1d09b5925693dbcbec7b77fa814510
Additional Information 3:     bce7
Additional Information 4:     bce7b9096fa4d3e33239f38f9b4cacd0
My user says there is nothing fancy or odd about this image, and the filesize wasn't any bigger than anything else he works on. What really baffles me is that the other user with the same setup has no issue... Thanks in advance!
-Jim

Since CoolType is implicated, it seems likely that user has installed a font that throws Photoshop for a loop. The recourse in that case is to try to figure out which one it is and remove it from the system (and/or reinstall an un-corrupted copy of that font).
Some tricks to try to figure out which font it is:
1. Look in the document that's failing to open with the other user's copy of Photoshop. See what fonts are there.
2. Create a new document on the offending machine, invoke the Horizontal Type Tool, then open the font list. You might find the list stops abruptly before the offending font.
3. Remove all fonts except the Windows standard ones, see if the problem goes away, then add them back piecemeal until the problem recurs.
If the above doesn't get you success, another thing to think about when a problem is user-specific:   You might reset their Photoshop preferences to out-of-box defaults. To do that you press and hold Control-Shift-Alt immediately after starting Photoshop from its menu entry or shortcut. You have to be very quick, and if you do get its attention it will prompt and ask whether the preferences should be reset. Keep in mind some Photoshop reconfiguration will need to happen after you do this, so it's not something to do lightly or you might get your users upset at you.
Best of luck.
-Noel

I need help with my CS5 installation

My CS5 installed normally as usual, but once it was done it was telling me that there was an error in installing, told me to restart and proceed with the installation again.
I did it twice, and now it seems to work but it gave me the same error.
I opened the program and it's telling me that,"Photoshop has encountered a problem with the display driver, and has temporarily disabled the GPU enhancements. Check the video card manufacturer's website for the latest software."
I did an update search on my computer for that specific driver and apparently it's up to date. I also read on a forum that I needed to download Adobe Driver. But, unfortunately it's saying the same thing that CS5 said after the installation, to restart and continue with the installation.
Help?

if you're encountering multiple different error messages,
1. uninstall cs5,
2. run the cleaner,
3. update your video driver (go to your video card's manufacturer website),
4. restart your computer (http://www.adobe.com/support/contact/cscleanertool.html) and then
5. reinstall cs5.

Need Help with Flash cs5

Hi! I am using Flash Cs5 on windows 7.I am having trouble with virtual memory allocation for Flash cs5.
Getting this error message .......
PLEASE HELP !!
MY System Specs Are:
OS Name
Microsoft Windows 7 Ultimate
Version
6.1.7600 Build 7600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
NAME-PC
System Manufacturer
Gigabyte Technology Co., Ltd.
System Model
H67MA-UD2H-B3
System Type
x64-based PC
Processor
Intel(R) Core(TM) i5-2300 CPU @ 2.80GHz, 3001 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Award Software International, Inc. F1, 2/11/2011
SMBIOS Version
2.4
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume1
Locale
United States
Hardware Abstraction Layer
Version = "6.1.7600.16385"
User Name
Shyamal-PC\Shyamal
Time Zone
India Standard Time
Installed Physical Memory (RAM)
8.00 GB
Total Physical Memory
7.98 GB
Available Physical Memory
6.15 GB
Total Virtual Memory
16.0 GB
Available Virtual Memory
14.0 GB
Page File Space
8.00 GB
Page File
C:\pagefile.sys

Try Re-Installing and make sure your installation is OK and your comp is.

Help with Boot Camp Assisant install

I am trying to install windows 8 on my macbook pro I bought Saturday (2/28). I get past the first 3 steps but when it restarts my computer the first thing it does is boot to the usb drive called windows where it tells me there is no boot disk available press any key to continue, then there is the efi boot i believe which when clicked under boot menu at start it starts to install windows all the way till I have to choose a partition and it comes up with this error message Please help need windows to run certain programs for school!!

Last login: Wed Mar 4 00:05:23 on console
Brendans-MacBook-Pro:~ BHoss$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         397.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data                         102.0 GB   disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Brendans Hard Drive    *396.9 GB   disk1
                                 Logical Volume on disk0s2
                                 E9D52E86-C9F8-4199-99E7-55591DC1F44F
                                 Unencrypted
Brendans-MacBook-Pro:~ BHoss$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 6410A4FF-76DC-4C11-BEA2-10DB12DB8D47
    =========================================================
    Name:         Brendans Hard Drive
    Status:       Online
    Size:         397248102400 B (397.2 GB)
    Free Space:   18972672 B (19.0 MB)
    |
    +-< Physical Volume BC7D8947-0101-4EF3-9ED3-FA605FD32FE6
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     397248102400 B (397.2 GB)
    |
    +-> Logical Volume Family 7D0AF1EC-3255-43E6-B093-91FE28B64956
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume E9D52E86-C9F8-4199-99E7-55591DC1F44F
            Disk:                  disk1
            Status:                Online
            Size (Total):          396876808192 B (396.9 GB)
            Conversion Progress:   -none-
            Revertible:            Yes (no decryption required)
            LV Name:               Brendans Hard Drive
            Volume Name:           Brendans Hard Drive
            Content Hint:          Apple_HFS
Brendans-MacBook-Pro:~ BHoss$ sudo gpt -vv -r show /dev/disk0
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
Sorry, try again.
Password:
Sorry, try again.
Password:
Sorry, try again.
sudo: 3 incorrect password attempts
Brendans-MacBook-Pro:~ BHoss$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         397.2 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data                         102.0 GB   disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Brendans Hard Drive    *396.9 GB   disk1
                                 Logical Volume on disk0s2
                                 E9D52E86-C9F8-4199-99E7-55591DC1F44F
                                 Unencrypted
Brendans-MacBook-Pro:~ BHoss$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 6410A4FF-76DC-4C11-BEA2-10DB12DB8D47
    =========================================================
    Name:         Brendans Hard Drive
    Status:       Online
    Size:         397248102400 B (397.2 GB)
    Free Space:   18972672 B (19.0 MB)
    |
    +-< Physical Volume BC7D8947-0101-4EF3-9ED3-FA605FD32FE6
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     397248102400 B (397.2 GB)
    |
    +-> Logical Volume Family 7D0AF1EC-3255-43E6-B093-91FE28B64956
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume E9D52E86-C9F8-4199-99E7-55591DC1F44F
            Disk:                  disk1
            Status:                Online
            Size (Total):          396876808192 B (396.9 GB)
            Conversion Progress:   -none-
            Revertible:            Yes (no decryption required)
            LV Name:               Brendans Hard Drive
            Volume Name:           Brendans Hard Drive
            Content Hint:          Apple_HFS
Brendans-MacBook-Pro:~ BHoss$ sudo gpt -vv -r show /dev/disk0
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
After this point it doesn't allow me to enter password as I type nothing comes up

Need help with a download and install problem with PS Elements-Elements opens but Premier has error popup

I purchased PS Elements and Premier Elements through Academic Superstore as a download on Aug. 8, 2014. I am installing on a MAC Book Pro 10.9.4, and have tried reinstalling 3 times. I also searched the error messages on support and could not find the error I am getting. Every time I am able to open the Elements file will open and work, but the Premier file has a window pop up that says: The Following disk images couldn't be opened: Image - PremiereElements_12_WWEFDJ.dmg Reason - image not recognized. Does anyone have a solution?

PremiereElements_12_WWEFDJ.dmg is the installation file. http://www.ofzenandcomputing.com/how-to-install-dmg-files-mac/
if you're seeing that message when trying to install pre 12, you have a corrupt download. redownload:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Help with Dreamweaver CS5 spry menus. Menu is not dropping down in IE7.

Hello.
We recently upgraded from GoLive CS3 to Dreamweaver CS5. Wow! This has been a big change for us. We are having trouble with a website that we are building, specifically the Spry Menu drop downs not appearing correctly in IE7 and older. While the dropdown menu appears in other browsers, it is not dropping down at all in IE7 and earlier versions. After researching this topic on many websites, including this forum, we are still unable to resolve our particular issue. We have tried many of the suggestions that are common to our problem, but have not found a solution as yet. Could someone please check out this page for us, and possibly give us some advise. We are working on Mac OSX. Thank you in advance for any suggestions you may offer.
http://www.advertools.net/pgtdemo/index.html

When I added the following to the document
<style>
#main_image {position:static;}
</style>
the menu items appeared albeit in the wrong position.
The reason for the hidden menu items is because #main_image had a position of relative, effectively creating a flow of its own rather than following the natural flow of the document.
Now for the postion of the submenu. If I add the following style rules to the document the submenu items are in the correct position
ul.MenuBarHorizontal li {text-align: left;}
ul.MenuBarHorizontal a {text-align: center;}
In the first line I have reset the rule that you had changed to center align and in the second line (which is not in the original CSS) I have aligned the text in the anchor tag to align center.
The reason is that IE<8 behaves differently to other browsers when it comes to list items causing the nested list items (submenu) to align themselves to the center of the text of the parent list item.
I hope the above helps.
Gramps

Help with PS CS5 ISO install

Similar Messages

Maybe you are looking for