Help with PS Script to output 100's of DFS Targets using Get-DfsnFolderTarget
Hello,
I have a lot of DFS targets to pull data on and or clean up. All our users homedrives have the same path format.
\\domain\userhome\alias(userlogon name). If I run the following command I get the info I want.
Get-DfsnFolderTarget -Path "\\domain\userhome\alias" | export-csv c:\temp\DFSpath.csv
What I need to do is use the 'input-csv' command to input 100's of users. I've been playing around with this but no luck. My scripting isn't the best. I tired the following command with no luck.
Import-Csv "C:\temp\DFS.csv" foreach {Get-DfsnFolderTarget -Path $_.Path}
Any input is greatly appreciated.
thank you
This command worked for me. The path was stored in a column named path.
import-csv "\\path\to\my.csv" | % { Get-DfsnFolderTarget -path $_.path }
If this doesn't work, what error do you get?
Similar Messages
-
Problem with SAP Script FAX output
Hi Friends,
I have problem with SAP Script Fax output.
After I issued output using the messge type, the print preview format shows me correct alignments and the right data. But when I go to List display using the menu bar functions from the print preview screen, the list is showing me the right data, but all the alignments at the main window went wrong.
How do I rectify this problem? I need correct alignments in both form display and list display.Hi Sasidhar,
Have you tried with different fax machine.
Regards,
Atish -
Help with Report Script please :(
Hi,
I'm trying to write a report script with a slight calculation and would really appreciate some help.
Ideally I want to create a report where I only get the Account and Value. I select all my members but I need a calculation on the Entity dimension. Here's what i am trying to achieve:
(All selected members for all Entities + All selected members for all Entities in group RIA-IFRS REPORTING ADJS. ) Yes I'm duplicating the members of group RI-IFRS REPORTING ADJS.
So account 100 for all Entities = 50
account 100 for all Entities in RI-IFRS REPORTING ADJS. = 25
I want to display account 100 grouped as 75 without showing a line for each entity.
This is what I have so far but it doesn't work right:
ROWREPEAT
SUPCOLHEADING
SUPCOMMAS
SUPHEADING
SUPBRACKETS
SUPEMPTYROWS
TABDELIMIT
MISSINGTEXT "#mi"
DECIMAL 2
NOINDENTGEN
<PAGE ( Years, Version, Currency, Scenario, InterCompany, "Entity", "Cost Center","Set of Books","Reporting")
"FY10" "Current" "Currency" "Actual" "InterCompany" "Entity" "Cost Center" "AB_CON_USD" "Reporting"
<ROW ("Account")
<LINK(<DESCENDANTS("Total Balance Sheet Accounts","Lev0,Account"))
{ CALCULATE ROW "Entity" = "Entity" + "RI-IFRS REPORTING ADJS."})
<COL (Period)
"Dec"
!Dreamscapeuk wrote:
Hi Robert, I wasn't getting any data, but I managed to figure that out. Basically I created 2 columns with the values I needed and then added them up with a calc cloumn. However I can't get my essbase substitution variables working. So I created a substitution variable called CurrQtr and set this to Quarter3. In my script I'm using this @CurrQtr as a period however it doesn't use it as it's just giving me the total for the Period dimension. Any help?
Here's the script:
ROWREPEAT
SUPCOMMAS
SUPBRACKETS
SUPEMPTYROWS
TABDELIMIT
MISSINGTEXT ""
DECIMAL 2
NOINDENTGEN
<PAGE ( DataSrc, Years, Version, "P&L Type", Currency, Scenario, InterCompany, "Cost Center","Set of Books","Reporting")
"DataSrc" "FY10" "Current" "No_Type" "USD" "Actual" "InterCompany" "Cost Center" "AB_CON_USD" "No_Cost_Type"
<COLUMN (Period)
@CurrQtr
WWL "RIA-IFRS REPORTING ADJS."
CALCULATE COLUMN "Gaap" = 1 - 2
ORDER 0,3,1,2
<ROW (Account)
<LINK(<DESCENDANTS("Global Accounts","Lev0,Account"))
In my script I'm using this @CurrQtr as a period however it doesn't use it as it's just giving me the total for the Period dimension. Any help?
I don't understand this...
*<COLUMN (Period)*
* Qtr3 WWL "RIA-IFRS REPORTING ADJS."*
have you tried like this.??
Edited by: Prabhas on Feb 1, 2011 12:05 AM -
Hi,
I found this Apple script online and here's how it works:
tell application "QuickTime Player"
activate
try
if not (exists document 1) then display dialog "Please open a QuickTime movie." buttons {"Cancel"} default button 1 with icon 1
set thefile to (choose file name)
save document 1 in thefile
close document 1
end try
end tell
+I run the Apple script+
*1. It prompts me to open a movie file in Quicktime*
+I open a movie in Quicktime+
*2. It prompts me for an name and directory to save the new file in*
+I enter a name and directory+
*3. It saves a new reference movie in said directory with said name*
This is useful if I want to customize every file, but unfortunately, I just want to mass create reference movies for a whole bunch of files.
What I am looking for is for an Apple script that is a drag and drop application, so I can drop say 100 movie files or so, and have the Apple script create reference movie files with the same name and in the same directory automatically with no prompts.
Since I am unfamiliar with Apple script I was wondering if someone would be able to edit my existing script to do what I want.
Thanks so much for your help!Use Automator. It's great for repetitious tasks (like the one you've described), and it's very user-friendly. Open Automator, create a new workflow that executes the action you want, and you can apply that action to the resources you wish to edit.
Good resource here:
http://bit.ly/ -
Would anyone be willing to help me with a script? I need to Find the first table using "ERTStyle1" table style, convert it to text, change the text style to "Tabfix" paragraph style, then convert it back into a table using the table style "ERTStyle2" convert the top row to a header. It needs to repeat this process until there are no tables left using the "ERTStyle1" table style.
I think I could almost do this myself using VBScript, but I am relatively new to scripting, and to be honest, I am hoping I can use this script to jump start my knowledge of VB in Indesign.So all of this is just to set the column widths to the sizes pre-defined in a paragraph style, i.e., always the same?
I feel like I almost could do that in VB!
But in Javascript, all it needs is sth in the ilk of
var myWidths = [ 10, 50, 100, 50, 12 ]; // in whatever units you fancy
var myTable = app.activeDocument.stories[0].tables[0]; // (just grabbing some table)
for (i=0; i<myTable.columns.length; i++)
myTable.columns[i].width = myWidths[i % myWidths.length];
.. and the most interesting thing here (written from top of my head) is the "myWidths" lookup: it doesn't matter how many columns there are in this table, 'cause the widths array wraps around. (But you won't need this because you know all of your widths in advance.) -
Help with report script query please
Hi,
I'm trying to write a report script with a slight calculation and would really appreciate some help.
Ideally I want to create a report where I only get the Account and Value. I select all my members but I need a calculation on the Entity dimension. Here's what i am trying to achieve:
(All selected members for all Entities + All selected members for all Entities in group RIA-IFRS REPORTING ADJS. ) Yes I'm duplicating the members of group RI-IFRS REPORTING ADJS.
So account 100 for all Entities = 50
account 100 for all Entities in RI-IFRS REPORTING ADJS. = 25
I want to display account 100 grouped as 75 without showing a line for each entity.
This is what I have so far but it doesn't work right:
ROWREPEAT
SUPCOLHEADING
SUPCOMMAS
SUPHEADING
SUPBRACKETS
SUPEMPTYROWS
TABDELIMIT
MISSINGTEXT "#mi"
DECIMAL 2
NOINDENTGEN
<PAGE ( Years, Version, Currency, Scenario, InterCompany, "Entity", "Cost Center","Set of Books","Reporting")
"FY10" "Current" "Currency" "Actual" "InterCompany" "Entity" "Cost Center" "AB_CON_USD" "Reporting"
<ROW ("Account")
<LINK(<DESCENDANTS("Total Balance Sheet Accounts","Lev0,Account"))
{ CALCULATE ROW "Entity" = "Entity" + "RI-IFRS REPORTING ADJS."})
<COL (Period)
"Dec"
!For the benefit of anyone else looking for this answer, I figured it out.
//To do this it's better to create 2 columns:
<COLUMN (Period)
Q4
WWL "RIA-IFRS REPORTING ADJS."
//Then add the 2 columns up:
CALCULATE COLUMN "Q4 Gaap" = 1 - 2
//And order the column how you want
ORDER 0,3,1,2
Hope this help someone out.
http://atmyplace.co.uk -
Help with action script number guessing game
can someone help me in flash cs6 to make a simple guessing game, i just need help with the coding. making a guessing game from 1-100
The constructor is coded to assign a random number for
the user to guess
• In the section of code indicated by the comments
(within the handler function doGuess()), write condition
statements that guide the user to guessing the number
using text written to the output
• Trace out the users' guess, plus a message
• Messages for the user depending how close they are from the
guess, condition each of the following:
• Guesses correctly, +/-1 from the guess, +/-10 from the guess,
+/-20 from the guess, +/-40 from the guess, all other guessesclose, it's actually an in class practice lab. After doing this we have to do another one that needs to be submitted. I just need help with the coding for this because i dont know how to start at all. let alone the actual lab.
-
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444) -
NEED a java coder to help with a script for a programs of mine.
I play a game, very competitively, and need someone to make and compile a script for me. I am willing to pay upwards of 100 USD for this script made to MY standards. There will be a lot of work involved...Probably 12 hours studying my game and the purpose of the script(s). I will be buying 2-3 scripts, at roughly 50-100 USD each, depending on the quality. I will transfer the money via paypal, or other means if we can reach an agreement.
Please IM me at Chadtrapier on AIM or send an email to [email protected]
Or...Add me on MSN - [email protected]
We can reach an agreement with these scripts...
Thank you, I will also check this thread, so reply if you would like.
~ChadUmmm. Do you think that's a lot of money or something? Think in the range of 40-60 per hour. And if you're talking about warcraft I don't think they java hooks to make bots. I think you need to figure out what your problem is first and maybe learn to code them yourself.
-
I was wondering if someone could help me with a simple bit of action script 3. I need to make a movie clip (single_mc) disappear when the user clicks on the mouse (stop_btn). Here’s what I have so far.
function setProperty(event:MouseEvent):void
single_mc.alpha=0;
stop_btn.addEventListener(MouseEvent.CLICK, setProperty);
Also I was wonder if you could recommend an Action script 3 book for me. I would like one that is not a training book, but has situations and then the script written out. For example: I click a button and a movie symbol disappears from the stage. I am a graphic artist, that from time to time, needs simple interaction in flash, but cant justify the time to learn the script.
Thanks for your timeuse the snippets panel to help with you with sample code for basic tasks.
function setProperty(event:MouseEvent):void
single_mc.visible=false;
stop_btn.addEventListener(MouseEvent.CLICK, setProperty); -
I found a script online that turns my images into a square (by extending the canvas size of the short side to match the length of the long side) which is awesome, but I would like to do an additional step and I have no scripting experience so hopefully someone can help.
now that my images are square I want to set a maximum dimension of 2500x2500 px, i have found scripts to set a resolution to a specific size but what I want to make sure I avoid is upsampling, so I just want any image larger than 2500x2500 px to down sample to 2500x2500 px
any knowledge on the code for this would be much appreciated.
When I am at the machine with the script I currently use I will paste it here in the meantime if you know something about scaling images down but preventing scaling them up I could probably chimp with the code I have and make it work.Photoshop shipts with a plug-in script that will do that for you. its found under menu File>Automate>Fit Image. Set both width and height to 2500 and check do not resize images that fit so your small square images will not be resized up in size. You could also just create an action that uses both scripts
step 1 menu File>Scripts>Make canvas Square.
setp 2 menu File>Automate>Fit Image. The 2500 x 2500 no upsize option settings will be recorded into the step and when the action is used its dialog will be bypassed and the recorded settings will ne used.
You can then batch the action using menu file>Automate>Batch or menu File>Scripts>Image Processor. -
Help with two scripts - Mounting remote DMG and Checking which network I'm connected to
Hey guys, I need some help with two separate scripts:
1. The first script I'm trying to create to mount a DMG stored remotely on another Mac using an AppleScript or shell script. Using the following:
set cmd to "hdiutil mount 'afp://username:[email protected]/Lion/Users/username/Desktop/Test.sparseim age'"
do shell script cmd
results in the following error:
error "hdiutil: mount failed - not recognized" number 1
I'm not very experienced regarding AppleScript or using hdiutil, could somebody point out what's wrong with my script?
2. The second script I'm working on to try and essentially prevent the 'Could Not Find Server' Finder dialog when a network mount is unavailable. I guess what I'd like it to do is detect which network I'm connected to, and if I'm connected to the correct network, then mount the shares, otherwise just fail silently without any errors. From the searching I've done, using try statements should do this, but they do not, and I'm still presented with an error dialog after the server cannot be found.
Does anybody have any suggestions on this script? Also, I've seen some tips regarding detecting which wireless network the Mac is connected to, which could work, but what about when connected via Ethernet?
Thanks!Edit: I need to clarify on my first script request:
I need to mount the DMG on the remote Mac, not on the Mac I'm running the script from. -
Can anyone help with the scripting on this file?
Hi, I hope someone with a bigger brain can help me out here.
I've got an existing Flash CS3 file that makes up the result at http://www.infusion-set.com/flash/Elearning/Inset30/inset30_eguide.html.
The client has asked if I could add an extra tab at the top after 'Reconnecting' called 'Contact Us' with link to an extra page. All the design has been done in ActionScript 2 with references to XML files for the dynamic content because it's been done in other languages as well.
I've amended the existing XML file with the correct references for a new page and an accompanying .swf file to play in the animation area.
I've attempted a .fla version where I duplicated one of the existing tabs script, changed the XML references and changed the variables where necessary to 'con or 'Con' (representing Contact Us). Unfortunately it made the tab menu go completely off the page and was obviously wrong in some way.
Can anyone give me a clue as to what to change here on the original file as I'm a bit of a novice with ActionScripts, hence me asking.
For reference I've attached HTML files with the original file scripts and my incorrect version. The timeline is 103 frames with the scripts placed at frame 1 and 102
Thanks.
GarryThe buttons are all created using the same library object (but MC), except for the code you have in the revised file does not call on that for the con button.
You have it calling on something with a linkage name of "con", which a quick check tells me doesn't exist--so it is undefined in the code when you try to use it. I found this by using trace(newConBut._x); after its _x value was assigned, as I mentioned you should try. So the first thing you want to do is change the following line from...
var newConBut = _root.attachMovie("con", "conbut", _root.getNextHighestDepth());
To
var newConBut = _root.attachMovie("but", "conbut", _root.getNextHighestDepth());
so that it uses the but MC that serves that purpose in the library. Then you want to correct the _x assignment of the buttons to what I think you had earlier...
newConBut._x = 650-newConBut._width;
newRecBut._x = newConBut._x-newRecBut._width;
Here is a picture of what those changes do (note, without the XML file I had to finagle things just to work, so the biutton labels aren't what they will be)... -
Help With dynamic scripting for Dervied Property
Hi,
I am trying to get the the list of child nodes and then loopthorugh those nodes to do some calculation in a derived propety using dynamic scripting. I tried with below script.
var childEnumerator = node.GetChildEnumerator();
while(childEnumerator.MoveNext())
var propValue = childEnumerator.GetCurrent().PropValue("Custom.Salary");
print(propValue);
While Evaluating this script I am getting below mentioned error. Any idea what i am missing here?
DRM-16008: There was an error calculating Script property Custom.TotalSalaryExp for EMP_Zone/Emp/PPD1: TypeError: 'GetChildEnumerator' is not a function
Please help me out. thanks fr your co-operation
Regards,
SudiptaTry this instead...
var childEnumerator = node.GetChildEnumerator();
childEnumerator.MoveNext();
while(childEnumerator.GetCurrent() != null)
var propValue = childEnumerator.GetCurrent().PropValue("Custom.Salary");
print(propValue);
childEnumerator.MoveNext(); -
Can anyone help me with this problem. I have designed a form
for a catalogue request that i want to be emailed to me after
submitting, I am using Fasthosts and need to use their settings. i
have been able to do their basic feedback form and that has worked
but when i have tried to change it to send my own form i am
struggling. i/ have never done PHP before and know i need to learn
quick! I have checked all the script and the message i am getting
now is a problem with the actual sending part. This is the code i
have used
$sent = mail($email_to, $emailSubject, $message,
$headers,'-f.$email_from') ;
if ($sent)
/*If sent direct customers to thankyou page */
header( "Location:
http://www.cicomol.co.uk.co.uk/thankyou.html"
} else {
/* If there is an error display an error message */
echo 'There has been an error sending your comments. Please
try later.';
?>
Can anyone give me a clue?
thanks so much
regardshighbank64 wrote:
> But now i can only get the name and comments to show on
the email i receive.
> Can some please let me know the best way to add the
other fields onto my
> script. I don't understand the \n bits!
Using a language like PHP without understanding it is an
invitation to
security problems. Everyone is a beginner to start with, so
there's
nothing wrong with not knowing how a script works at the
outset, but you
need to get the basics under your belt pretty quickly.
Otherwise, you
are laying the foundation for lots of headaches.
OK, lecture over. "\n" is the way that PHP (and other
languages) inserts
a newline character.
> my code at the moment is
> $message= "Name: ".$name . "\nComments: ".$comments;
So, "\nComments: " simply puts a newline before Comments. The
period
(full stop) concatenates (joins together) different parts of
a string.
You can also add to an existing string by using .= (the
combined
concatenation operator).
Assuming the form is submitted using the POST method, you get
the values
of other fields by adding the name of the field in quotes
between the
square brackets of $_POST[] (POST must be uppercase) like
this:
$message = "Name: $name";
$message .= "\nComments: $comments";
$message .= "\nPhone: " . $_POST['phone'];
$message .= "\nEmail: " . $_POST['email'];
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/
Maybe you are looking for
-
How to get a Canon MP830 on a TC to work again with my iMac?
I have a Canon MP830 attached to my Time Capsule and it has worked fine for 18 months. My iMac is wired directly via ethernet cable into the TC. (And with the help of this forum I even managed to my XP and Vista PCs to wirelessly print to it). Then t
-
I would start with my original AVI file, then hit duplicate to get a duplicate file to work on....I then would use the "TRIM" feature to shorten the video. Then when I hit "close", and it prompted me to name the newly reduced file, and saved it appro
-
Sharing projects in a non-SAN environment...
Hello, Does anyone know if there would be any advantage to exporting projects or sequences as XML files to pass between edit bays for project sharing? Are there any disadvantages? I had heard that XML imports might hang if there are many 3D Titles in
-
HPA or currently known BI accelarator seems to be quite interesting and all presentations and demos seem to be impressive. 1. It would be nice to hear from folks in the ramp-up projects about their experience with HPA. Does is show remarkable resul
-
Why won't any mfi certified charging cable work on my iPhone 6
I have purchased over the last year several lightning charger leads from a well known shopping site and have always made sure they are Mfi certified to protect my iPhone 5s... Now I have my lovely new iPhone 6, they no longer work.. I have tried the