Help with Quality of Service (QoS)

Hello all,
I'm trying to set up QoS on my Actiontec MI424WR (Rev. I) router. I want to prioritze my Xbox One.
I followed the guide linked below.
http://support.actiontec.com/doc_files/MI424WR_Rev​._E&F_How_To_Configure_QoS.pdf
When performing an Xbox connectivity test, the test returns 100% packet loss...
Here are some images:
http://imgur.com/a/Td8Dr#0
http://imgur.com/a/Td8Dr#1
http://imgur.com/a/Td8Dr#2
My FiOS package is 75/35
For the record, have I properly set up port triggering? http://imgur.com/a/Td8Dr#3
Thank you,
Marvin

That message is logged when you have QOS disabled. Check http://docs.sun.com/source/817-1831-10/agsnmp.html#wp999778 for information on enabling QOS.
However, the server should not crash/restart. Please describe the steps to reproduce the problem.
Message was edited by:
Arvind_Srinivasan

Similar Messages

  • Quality of service (QOS) is disabled in the HTTP service.  Unable to tur...

    Hi,
    "Quality of service (QOS) is disabled in the HTTP service. Unable to turn on QOS features." this message is seen and server restart itself. Why this occur?
    Thanks..

    That message is logged when you have QOS disabled. Check http://docs.sun.com/source/817-1831-10/agsnmp.html#wp999778 for information on enabling QOS.
    However, the server should not crash/restart. Please describe the steps to reproduce the problem.
    Message was edited by:
    Arvind_Srinivasan

  • Quality of Service :Qos from Cloud Console 12.1.0.4

    Hello,
    After install a two node RAC  with 12.1.0.2 and a Cloud Console 12.1.0.4 , I'm trying to Access to the Quality of Service Management option, from Cloud GUI.
    But, to choose Dashboard or other options, appear this error:
    Error
    :Cannot connect to Quality of Service Management Server: Error while getting remote MBeanServer for url: ormi://rac1:23792/default
    Specify Quality of Service Management Credentials
    Specify the credentials to connect to Quality of Service Management Server.
    Is necesary start any agent?
    Which will be the correct credentials? Grid user?
    Many thanks
    Arturo

    Hi,
    IT should be Enterprise manager platform,
    --> Please check the OMS, Agent status,
    For OMS:
    export the OMS_HOME=
    emctl status oms -details
    for Agent
    As installed user : oracle
    export the AGENT_HOME
    emctl status agent.
    Pls try to clean shutdown and restart the OMS
    emctl stop oms -all
    make sure no oms process is running .. ps -ef | grep -i oms
    emctl start oms..
    =====
    select OWNER, TRIGGER_NAME, TRIGGER_BODY from DBA_TRIGGERS where trim(TRIGGERING_EVENT) = 'LOGON';
    If this returns any values, disable the logon trigger and attempt to configure again.
    ===
    Regards
    Krishnan

  • Help with validation of service order creation

    Dear All,
    I am working with creation of service order under service professional and got a requirement where
    1) I need to validate the quantity from BOM table comm_il_momitm. and
    2) Same product (product id) should not be called more than once, that is if the user selects same product once again it must throw an error.
    Please find the screenshot below
    Regards,
    Naveenn

    Hi Benoit,
    I give you my exact requirement,
    i need to validate quantity field entry (in above table) based on compon_qty field in comm_il_bomitm table.
    I tried to implement it using eh_onsave method in component BT116H_SRVO but it is displaying error message even the quantity is equal the compon_qty whereas it should display error only when it exceeds compon_qty.
    Please help by providing sample code.
    Regards,
    Naveenn

  • Thoroughly fed up with quality of service from BT

    Because broadband was so slow on our normal phone line I pay for an additional line dedicated to broadband. 
    The last time both these (BT) lines were working was 27th July!
    The main phone line died on 28th July and that was finally sorted out on 28th August. Immediately afterwards issues started with the other line, meaning broadband varies between very slow and completely unavailable (many times per day).
    An engineer has been round, but it looks like the issue is in the cabling. The main frustration is, I'm getting almost daily updates, but the quality of them is rubbish! The're either "your line should be fixed now" when it never is or "we're not sure what's happening - we'll ask Openreach and get an update for you tomorrow". That update is generally "it's fixed now" or "we'll get an update" again. I had a text two days ago saying they aim to fix it by 28/10 and then today I've had a text and phone call saying it's fixed (it still isn't). I've tweeted @bt_care but they're not contacting me when they say they will, so I'm at the end of my tether. 
    If I had any other options for my supplier I'd have left ages ago. We've lived in this house for 13 years and I'm pretty sure we've not had a clear year without any phone / broadband faults, and they've generally taken weeks rather than days to fix.
    I don't suppose anyone can help much, but it makes me feel better to vent!

    Hi SadGamerGeek,
    Welcome to the community and thanks for posting!
    Sorry for the problems you're having with your broadband speed and for the time it's taking to sort out.  I can help you from here.  Click on my username and under the section "about me" you'll see the link to "contact the mods".
    Whenever we've received your details we'll take it from there.
    Thanks a million,
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Need Urgent Help With Getting Intl Service from Bangkok

    Before I arrived in Bangkok, I spoke with Verizon CS from the US because I needed Intl Service on my Iphone 4. My boyfriend has an Iphone 5 and was able to add a calling plan in 5 minutes of calling Verizon CS. I then called Verizon CS, and was told that my Iphone 4 cannot be used in Thailand. I told the CS Rep that my boyfriend just added the service on his Iphone 5, and did the same on a trip to Thailand last year with an Iphone 4. She told me that with an Iphone 5 he also cannot use the service in Thailand without a Sim Card or Global Phone? I then put him on the phone with her, and they spoke for ten minutes about this before my plane departed.
    I have been in Bangkok since 04MAR14 trying to reach Verizon by web, Instant Chat, phone, and even called Verizon 611 from my boyfriend's handset. he call Failed! He then gave me this number to call Verizon Global Support: 908-559-4899. I have called this number numerous times from the hotel. The recording does not recognize when I "Press 1" or "Press 2", and proceeded to hang up on me several times. Is there no human at Verizon that help me????? I have spent approx 3 hours now trying to contact Verizon since 04MAR14. I am supposed to be enjoying my vacation here. Can someone please address these questions immediately?
    1. Am I currently being charged to use WIFI in Thailand?
    2. I transited Tokyo on 03MAR, and tried to call Verizon Support from my Handset, which Failed. Am I being charged for that?
    3. What message do my contacts receive when they text me in the US?
    4. Can I activate message response to contacts in the US now telling them that I am out of the country until the evening of 11MAR14?
    Please help me, I am extremely frustrated, as I desparately want Phone service here in Thailand, and I am transiting back to Tokyo on 10MAR14, arriving there at 245pm, and I will need Phone service there as well.
    Sincerely,
    Nancy
    Private info removed as required by the Terms of Service.
    Message was edited by: Admin Moderator

        I'm so sorry you haven't been able to get any service while traveling NancyStuckInThaiWithNoService, as well as for not being able to get a hold of anyone to assist you. I'm happy to answer your questions here. As you mentioned, the iPhone 4 is not a Global phone. Therefore, you can only use on a CDMA network, (not GSM). Thailand is GSM/Global, Japan/Tokyo is CDMA; therefore, you can use phone there. (It could be settings were not set correctly to use in Tokyo.
    1. If you're using WiFi, there is no charge. Its best to turn Mobile Data off in Settings to avoid any International charges.
    2. Japan/Tokyo calls are $1.99/minute. However, if trying to reach Global Support, you will not be charged.
    3. Your contacts don't receive any notification when they text you. They may get some alert days later, that the message was not received by you/ or it has been timed out, but it won't say why.
    4. If you're able to use another phone, and call your mobile number, you can press # when you hear your voice mail greeting, enter password, then # again, to change personal greeting. You're able to update greeting with notification that you're traveling.
    ** When back in Tokyo, you can go to Settings & make sure Airplane Mode is OFF. Also, you can go to General, (from Settings),> Network> Cellular Data- ON> Data Roaming- ON.***
    Here are rates while in Japan/Tokyo http://vz.to/18TRKVE
    Lastly, it may be easier to reach us on Facebook at Verizon Wireless, or on Twitter at @VZWSupport
    Thank you,
    VanessaS_VZW
    Follow us on Twitter @VZWSupport

  • Help with quality of exported files

    The problem: I'm trying to get a good quality, 34 minute movie onto a DVD with chapter markers separating individual short films. This is supposed to be a compilation of 8 family movies, in addition to an introduction and credits at the end. Four movies are old movies made in iMovie and are .m4v files. Four were made in FCE earlier this year. I linked everything together in a Master Sequence, putting pauses in between each with some livetype text files to introduce each video. The m4v files were imported and placed in the master sequence. The others are nested sequences. I put chapter markers at the beginning of each section. My intention was to export this one master sequence as a quick time movie, then put it into iDVD.
    It worked, but the quality was horrible! Everything became grainy, even the movies I had previously created in FCE. This was very disappointing. So I expertimented with a few things, and here’s what I found.
    When I exported a quicktime movie, the quality degraded. It became grainy. Also, it changed the aspect ratio and stretches everything horizontally, as if to take a standard size screen and stretch it to a widescreen. It did this even with the original movies I had made in FCE. I don’t like building self contained movies using this mode because the file sizes are too big, so when I export I tend to use quick time conversion. In this case, I was hoping a non-self contained movie would merely point to all the original content and not add compression artifacts (or something like that). It turns out it made it worse.
    When I tried to export a quicktime conversion, 640x480 VGA, best quality, H.264, the machine couldn’t do it. It ran for an hour or so and then crashed. Twice. That is for the entire movie. When I export individual clips (3-6 minutes) it works. The quality is good for movies made in FCE, not as good for imported m4v movies made long ago in iMovie, but better than what I get exporting quicktime movie files, either self contained or not. This is surprising to me, because I was expecting the export quick time movie command to produce the best quality. Also, I’m concerned that if I was able to create this, iDVD would not see any chapter markers anyway.
    So there is a problem either way. Experimenting has led me to discover several questions/issues which need answering:
    Issue #1: Why can’t I get a quick time movie of the same quality as what I see on the canvas, using the quick time movie export command? On a side note, the user's manual says something about a settings pop up menu where you can deselect the "recompress all frames" option. I can't seem to find this, and was thinking maybe that would help.
    Issue#2: Why do m4v files which are very high quality in iTunes suddenly become poor quality when imported into a sequence? Seems to be an import problem, because the movies are already grainy when they’re on the canvas. I thought about making XML files and importing them that way, but the original project files in iMovie are gone.
    Issue #3: Why do I end up with a stretched picture if I export quick time movies and there are mixed aspect ratio contents in the sequence (the m4v files are widescreen, the others are not)? More important, how to I get FCE to not do this?
    Issue #4: When I export movies using quick time movie (not conversion), the grainy movies actually look better when played in VLC. They also look good when opened with FCE. How can I get that kind of quality in quick time, or at least in iDVD? Perhaps that would solve my problem.
    Thanks for any help you can provide.
    E

    Thanks for the response. I’m not fluent with codecs or video compression, so this project quickly became more trouble than I expected.
    It turns out the nested sequences are not H.264, the compression field is blank for the nested sequences. I double checked and the other properties are correct. Sorry about that. The other movies, though, (ones built in iMovie for iTunes) are H.264.
    These four . m4v movies are in 960x540 and 480 x 272 because of the way they were exported in iMovie (Share -> Export Movie opens a menu with four sizes: Tiny 176 x 144, Mobile 480 x 272, Medium 640 x 360, and Large 960 x 540).
    I just imported the final products (what was exported from iMovie) as clips into FCE. Sounds like I should not be doing that. The original media is on my computer, but not the iMovie project files, and for what I’m trying to do it’s just not worth the time to rebuild the movies in FCE.
    Bottom Line: Here’s the current status of the project:
    All eight of the movies, by themselves, play well in quicktime. I can put all of them on a DVD, and they still play ok. I wanted to string them all together in one sequence, with some transitions in between (creating a “Play All” option on the DVD). That’s why I nested the sequences, and imported the movies made from iMovie, than added chapter markers. Unfortunately, putting these different types of media together and asking the computer to make one sequence is creating a mess. So I’m sticking with Plan B and putting the movies on a DVD without trying to merge them into a single track.
    A few follow up questions…
    Out of curiosity, when you say “convert everything to QuickTime DV NTSC 720x480 at 29.97fps with 48k audio,” do you mean the original media (all of the bits of video and stills that came from the camera) or the edited sequences I’m currently working with? As a lesson learned, should I be changing properties of clips before importing them to FCE, so the source material has consistent aspect ratios?
    The still images, though they are huge, show up with much better quality than the movies (which is expected, and I’m ok with). So I get a product which includes both video and still images, where the images are very sharp and the movie portions are a bit grainy (because they were taken on a small digital camera). If I change the size on the stills, won’t that just bring the still image quality down?
    I’m still baffled at why using the export quick time movie command makes a video of lower quality than when using quick time conversion (in other cases as well, not just this project). In every case, I’ve got digital pictures and movies from my digital camera, and some text in FCE or LiveType files on top of that, usually with additional audio tracks.

  • Help with quality of DVD playback

    Apologies for what is probably a very basic question with an even more obvious answer. Being new to Imovies & editing in general I finally managed to create a DVD via Imovies & IDVD. The issue is that the picture quality when watching the DVD is poor - the Picture looks like it is speeded up. The movie in idvd is only 2.2gb. When I went back & tried to save the original movie in Imovie via the "share" function (vs in iDVD) - in full DV mode it would be over 6.7GB (the movie is 32 mins long). Net, my questions are this;
    1) Is the reason it looks speeded up because idvd has compressed the movie & reduced the frames?
    2) Is it possible to increase the frames/quality (say from 2.2Gb to 4gb) without reducing the length and make idvd accept it - if so how do you increase the quality & stop idvd compressing so much. Do I need to do this in imovies or Idvd?
    3) How do I stop idvd compressing the movie at all and just adding say all 4GB of a 4GB movie?
    4) If I want DV quality on one DVD - do I basically always need to keep the film short?
    I really appreciate anyones help on this - as I am lost!

    I am having the same problem, using iMovie HD and iDVD. Actually, my movies play great in fullscreen mode in iMovie, but all the "share" settings I've tried (including "Full Quality" and "export to iDVD") come out looking bitmapped and terrible in general. Not something I want to share with the family. How do I export a movie so that it will play at the same great quality it does in the native program? Is it possible to export it uncompressed?
    PS. I've posted this question as a reply to several other discussions, but have not yet gotten any replies. Thanks!
      Mac OS X (10.4.3)  

  • NEED HELP WITH DATABASE WEB SERVICE INTEGRATION

    Hello everybody. I have created a web service with returns a list of records extracted from a database. It works, Apex references the web service and get the result when I test it, but I want to display results in a page type "Form and Report on Web Service" and when I associate the web service to the page and click on "Finish Button" I get this message:
    "This Web service does not have a result tree in its definition that is appropriate for a report. You may wish to run the Form on Web Service wizard instead.".
    It is correct, of course, but I do not have an example of how to do an appropriate definition for this kind of report.What kind of definition is it waiting for? What I do in the web service is to return a list of items (a resultset of a query such as "SELECT PRODUCTID, PRODUCTNAME, PRICE, IMAGEHREF FROM PRODUCTS") concatenated in a string (commas-separated values). What kind of output must the web service produce or how have I to structure the associated wsdl document in order to display the result with a "form and report on web service" page?
    Every help or example is welcome.
    Thanks a lot and have a nice day
    Stefano-ITALY

    i saw that it is giving this below error but not sure why ??
    org.apache.axis2.AxisFault: Exception occurred while trying to invoke service method registerEmployee
    at org.apache.axis2.util.Utils.getInboundFaultFromMes sageContext(Utils.java:486)
    at org.apache.axis2.description.OutInAxisOperationCli ent.handleResponse(OutInAxisOperation.java:343)
    at org.apache.axis2.description.OutInAxisOperationCli ent.send(OutInAxisOperation.java:389)
    at org.apache.axis2.description.OutInAxisOperationCli ent.executeImpl(OutInAxisOperation.java:211)
    at org.apache.axis2.client.OperationClient.execute(Op erationClient.java:163)
    at webservice.EmployeeServiceStub.registerEmployee(Em ployeeServiceStub.java:488)
    at webservice.EmployeeClient.main(EmployeeClient.java :22)can anyone suggest why this might come ?
    thanks

  • Help with Windows Deployment Services

    The WDS service was running. I restarted the service and tested with same result. 
    What is the correct bootfile name to be using? I have seen via Google searches - boot\pxeboot.n12 , boot\x64\pxeboot.com and boot\x64\wdsnbp.com. 
    This is how I added DHCP option 60....
    NETSH
    NETHSH>DHCP server \\nameofserver
    add optiondef 60 PXEClient String 0 comment=”Option added for PXE Support”
    set optionvalue 60 STRING PXEClient
    show optionvalue all
    exit
    And this is how I removed option 60...
    netsh dhcp server \\servername delete optiondef 60
    Hopefully that is correct. Any other ideas?

    I am trying to move from FOG to WDS after running in to serious UEFI issues with FOG.Right now I'm stuck with machines PXE booting to WDS server.I keep getting the message ProxyDHCP service didn't reply to request on port 4011.WDS and DHCP are on different servers. There are plenty of IP addresses available, and they are on the same subnet. I did originally configure DHCP option 60, but deleted that option after troubleshooting. I have configured Windows Firewall to allow inbound and outbound connections on UDP ports 67-69 and 4011 on both DHCP server and WDS server. I have also tried just using IP address in DHCP option 66. As for option 67, I don't even know the right bootfile name to use at this point, figured I'd tackle that if I ever get past this error message.Would appreciate any help! I have a two labs to image and deploy...
    This topic first appeared in the Spiceworks Community

  • Need help with the "Location Services"

    Hello, I haven't seen another topic about this so this is why I'm posting this.
    Recently, I've been wanting to use some apps which use the Location Services(where they need your current location), but every time they try to use it, it either says "Your current location could not be determined" or just doesn't do anything.
    -I am using a 2g iPod touch 8GB
    -I am connected to a WiFi network and can access the web
    I read some guides on the apple website. One said that not all locations can be determined, so I'm not sure if I'm in one of those.
    If you can help me with this, please post a reply. :]
    Message was edited by: TheFungus
    Message was edited by: TheFungus

    Hi TheFungus: The basis of Location Services on the iPod Touch is a service called Skyhook. For skyhook to be effective it needs to locate to a wireless router that has been registered with their system. If your wireless router or others in the area aren't registered, it will have no way of knowing where you are located.
    Hope this helps
    Stedman

  • Can anyone help with an operator service that hijacked my account.

    I recieved a message from some international operator service which I can not delete. I can no longer make any calls without going through them .

    I believe that was what we just did. It was reprogrammed. I am told i am in an extended network on Telecom towers. I have been here many times before without any such problem. waiting for the tech to get back to me. It was referred to a supervisor.
    << Personal information removed to comply with Verizon Wireless Terms of Service >>
    Message was edited by: Verizon Moderator

  • Help with Java Web Service

    Hi,
    I tried integrating java code with java embedding acitivity, but in em it is failing. Can anybody know how to convert the below java code to a webservice, so that I can pass the input paramaters directly to that webservice. I tried of converting java code to webservice in jdeveloper, but because of static void main it is not converting. Can somebody help me in this issue.
    this is the original executable java code.
    package com.holx.api.test;
    import java.util.HashMap;
    import com.agile.api.APIException;
    import com.agile.api.AgileSessionFactory;
    import com.agile.api.IAdmin;
    import com.agile.api.IAgileClass;
    import com.agile.api.IAgileList;
    import com.agile.api.IAgileSession;
    import com.agile.api.IAutoNumber;
    import com.agile.api.IDataObject;
    import com.agile.api.INode;
    import com.agile.api.IProperty;
    import com.agile.api.IServiceRequest;
    import com.agile.api.PropertyConstants;
    import com.agile.api.ServiceRequestConstants;
    import com.agile.px.ActionResult;
    import java.net.URL;
    public class TestAgileAPI {
    //     @Override
    //     public ActionResult doAction(IAgileSession arg0, INode arg1,
    //               IDataObject arg2) {
              // TODO Auto-generated method stub
    //          return null;
         * @param args
         public static void main(String[] args) {
              IAgileSession m_session = null;
              IAdmin admin = null;
              IAgileClass cls = null;
         String sr="PR-KB00028";
    String userName="*******";
    String password="*******";
    String URL="*********";
              try {
                   HashMap params = new HashMap();
                   params.put(AgileSessionFactory.USERNAME, userName);
                   params.put(AgileSessionFactory.PASSWORD, password);
                   AgileSessionFactory instance = AgileSessionFactory.getInstance(URL);     
                   m_session = instance.createSession(params);     
                   admin = m_session.getAdminInstance();
                   cls = admin.getAgileClass( "ProblemReport" );
                   IServiceRequest psr = (IServiceRequest)m_session.createObject( "ProblemReport", sr);
              psr.setValue(ServiceRequestConstants.ATT_COVER_PAGE_DESCRIPTION, "KB-Test-20121400");
              } catch (APIException e) {
                   e.printStackTrace();
              } finally {
                   m_session.close();
    Can somebody help me in converting this code into a webservice which accepts String SR as input from soa.
    Thanks,

    Hi Francois,
    I never tried to use a webservice in the value help wizzard, so I don't know if it works or not.
    But for your problem you can build your own value help to avoid the problem.
    You told us that the webservice works in the storyboard. The value help wizard "only" creates a popup iView in your model and assigns the output field of the popup to an input field in a form.
    Maybe as a solution you can insert a popup to the model by yourself. Assign the output field of your popup to the input field for which you want to have the value help. Inside the popup iView you can use your custom built webservice.
    I know that this is a little bit circuitous, but I think it will work.
    Regards
    Christophe

  • Systemd - help with creating a service file

    Hi, I am trying to make a service file to execute "devmon --no-mount --exec-on-audio abcde". Basicly I want abcde to run when an audio cd is inserted into a headless computer. I have tried some udev rules but had no luck with that.
    I then found udevil and devmon, and it seems to do exectly what I want.
    So Ive made a systemd service file and put it in to /usr/lib/systemd/system
    here is it:
    /usr/lib/systemd/system/abcde-auto.service
    [Unit]
    Description=Virtual Distributed Ethernet
    [Service]
    Type=simple
    ExecStart=/usr/bin/devmon --no-mount --exec-on-audio abcde
    [Install]
    WantedBy=multi-user.target
    I have started this with
    systemctl start abcde-auto.service
    and I see that a devmon process has started with the same arguments I gave in the service file, so all is good.
    But now, I am not too sure about the "Type" in the service file, devmon starts abcde, but:
    systemctl stop abcde-auto.service
    does not stop abcde, only devmon.
    Is there a way to setup the service file so that abcde will end as well as devmon?
    *Edit
    Ive read this http://www.freedesktop.org/software/sys … rvice.html but Im still not too sure. Dont really know what most of it means.
    Last edited by jrussell (2012-10-20 18:09:23)

    I use type 'oneshot' and add an ExecStop= to start and stop scripts.
    Like here is the unit file I use to start and stop arno-iptables-firewall
    [Unit]
    Description=Arno iptables firewall
    [Service]
    Type=oneshot
    RemainAfterExit=yes
    ExecStart=/usr/sbin/arno-iptables-firewall start
    ExecStop=/usr/sbin/arno-iptables-firewall stop
    [Install]
    WantedBy=multi-user.target

  • Help with Regex for service-http

    Hi folks,
    I'm trying to write a custom sig to match on certain values found in an HTTP GET request. The sig uses the service-http engine for TCP on standard WEBPORTS. For the sake of this example, lets say the string I'm looking for it:
    first=<somedata>&second=<somedata>&third=<somedata>
    In other words, if I see those three argument names (first, second, and third) then I want the sig to fire. The actual values of <somedata> is irrelevant.
    The RegEx I'm using is:
    ((first=).*(&second=).*(&third=).*)
    However the sig is firing on requests that just match on seeing "&third" in the HTTP GET. Again, I need -all three- arguments present for the sig to fire.
    Any suggestions? Am I on the right track with the regex?
    Thanks!!

    Ok, replying to my own post here, but I was able to resolve this issue. The regex does work as designed. I think to be safe I should add brackets to make it case-insensitive (e.g. (([Ff][Ii][Rr][Ss][Tt]=) ) but otherwise this matches the intended traffic.

Maybe you are looking for