Help With Quicktime Update Download Issue?....No DMG format? Only Windows?

I just got the new Final Cut Studio updates, but when I tried to install them for FCS 2, it asks for the 7.3 Quicktime? When I went to the Support section for downloads and tried to download for OS X, its only gave me the option to download for Windows XP? or Vista? I need a link to one of the proper pages to download the QT DMG 7.3, please help? Thank You Tim C.

Apple uses a "browser detect" to determine what type of OS is being used and redirects to that version download page. If you're using Windows to visit you'll only see the Windows download.

Similar Messages

Can any help with my Xcode download issue?

Hi all,
Can anyone help with my Xcode issue? I downloaded it the other day but it is currently stuck saying waiting. I found this advice online http://scheyeniam.blogspot.co.uk/2011/08/how-to-revive-mac-app-store-when-its.ht ml and it seemed simple enough. However it tells me to go into activity monitor and quite 'storeagent'. The issue is that there is no process called storeagent. I have tried quitting other processes but it doesn't seem to be working.
Does anyone know of a solution to stop the download saying 'waiting' and to get it started?
Thanks

Most likely it is downloading, although the App Store doesn't show the download progress. I had the same problem yesterday when I did the upgrade. It eventually finished, and it's quite a large download, so it might take hours, depending on your internet connection.
If you open the Launchpad, and locate the XCode application icon, it should show a download/install progress, if you want to verify that it's actually doing something. Otherwise, just leave the App Store running, and it should eventually finish.

Hoping for some help with a very frustrating issue! I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Hoping for some help with a very frustrating issue!
I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud 2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel. I even uninstalled iCloud on the PC and downloaded it again (same version).
The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.” After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
Sound familiar? Any ideas on how to solve this iCloud/Outlook issue? Thanks much in advance!

Can anyone help with problem updating iphone5s cant get anything only apple on screen sometimes screen flashes blue

can anyone help with problem updating iphone5s cant get anything only apple on screen sometimes screen flashes blue

Hey damien555,
Thanks for the question, I understand how frustrating this may be. It sounds like the update process may have been interrupted, and to resolve the issue, we’ll need to restore your device in recovery mode with iTunes:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

Still need help with flash player download

I'm still having a problem with the flash player, please read my last post below:
"I've tried everything here & still can't download the flash player. Anytime I try to download it asks me to install ADM add-on and then when I click on that, my computer freezes. How do I enable this add-on without my computer freezing? Can anyone help pls?"

Thanks a lot for your help, it is truly appreciated.
Date: Thu, 29 Oct 2009 18:52:38 -0600
From: [email protected]
To: [email protected]
Subject: Still need help with flash player download
You can set Flash Player to check for updates on the Global Settings Manager panel:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
>

Can anyone help with Ibook previously downloaded on ipad now somehow sitting in icloud and unable to open in IBOOK. it is greyed out.

Can anyone help with Ibook previously downloaded on ipad now somehow sitting in icloud and unable to open on ipad . it is greyed out.

I Have this problem as well on my iPad using ios8. I found it only happened after I downloaded the some free books from the bookstore. I have tried to reset all settings but nothing seems to have worked. any ideas??

Help with this update statement..

Hi everyone,
I am trying to update a column in a table .I need to update that column
with a function that takes patient_nbr and type_x column values as a parameter.
That table has almost "300,000" records. It is taking long time to complete
almost 60 min to 90 min.
Is it usual to take that much time to update that many records?
I dont know why it is taking this much time.Please help with this update statement.
select get_partner_id(SUBSTR(patient_nbr,1,9),type_x) partner_id from test_load;
(it is just taking 20 - 30 sec)
I am sure that it is not the problem with my function.
I tried the following update and merge statements .Please correct me if i am wrong
in the syntax and give me some suggestions how can i make the update statement fast.
update test_load set partner_id = get_partner_id(SUBSTR(patient_nbr,1,9),type_x);
merge into test_load a
using (select patient_nbr,type_x from test_load) b
on (a.patient_nbr = b.patient_nbr)
when matched
then
update
set a.partner_id = get_partner_id(SUBSTR(b.patient_nbr,1,9),b.type_x);
there is a index on patient_nbr column
and the statistics are gathered on this table.

Hi Justin,
As requested here are the explain plans for my update statements.Please correct if i am doing anything wrong.
update test_load set partner_id = get_partner_id(SUBSTR(patient_nbr,1,9),type_x);
"PLAN_TABLE_OUTPUT"
"Plan hash value: 3793814442"
"| Id | Operation          | Name             | Rows | Bytes | Cost (%CPU)| Time     |"
"|   0 | UPDATE STATEMENT   |                  |   274K| 4552K| 1488   (1)| 00:00:18 |"
"|   1 | UPDATE            |        TEST_LOAD |       |       |            |          |"
"|   2 |   TABLE ACCESS FULL|        TEST_LOAD |   274K| 4552K| 1488   (1)| 00:00:18 |"
merge into test_load a
using (select patient_nbr,type_x from test_load) b
on (a.patient_nbr = b.patient_nbr)
when matched
then
update
set a.partner_id = get_partner_id(SUBSTR(b.patient_nbr,1,9),b.type_x);
"PLAN_TABLE_OUTPUT"
"Plan hash value: 1188928691"
"| Id | Operation            | Name             | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |"
"|   0 | MERGE STATEMENT      |                  |   274K| 3213K|       | 6660   (1)| 00:01:20 |"
"|   1 | MERGE               |        TEST_LOAD |       |       |       |            |          |"
"|   2 |   VIEW               |                  |       |       |       |            |          |"
"|* 3 |    HASH JOIN         |                  |   274K|    43M| 7232K| 6660   (1)| 00:01:20 |"
"|   4 |     TABLE ACCESS FULL|        TEST_LOAD |   274K| 4017K|       | 1482   (1)| 00:00:18 |"
"|   5 |     TABLE ACCESS FULL|        TEST_LOAD |   274K|    40M|       | 1496   (2)| 00:00:18 |"
"Predicate Information (identified by operation id):"
"   3 - access("A"."patient_nbr"="patient_nbr")"Please give some suggestions..
what's the best approach for doing the updates for huge tables?
Thanks

Can anyone help with the installation of adobe creative suite 4 on windows 7

can anyone help with the installation of adobe creative suite 4 on windows 7

You're not going to get any help without providing FULL DETAILS about the problem and your system.
Bob

Help with iPad update issue

Need help with update issue please

Please see your duplicate thread below for answer already provided.
https://discussions.apple.com/message/25940896#25940896

Need Help with QuickTime to Apple TV Export Weirdness

I am having a problem using QuickTime Player 7 Pro to convert a movie file in its original 1280x720 size for use with Apple TV. (iMovie creates a 960x540 file for Apple TV by default and the only way to get a 1280x720 file is to have iMovie use QuickTime to export it as a .mov file in that size and convert it to a .m4v file for Apple TV separately, with QuickTime Player 7 Pro. Unfortunately, I haven't been able to produce the 1280x720 file that is compatible with Apple TV.
To demonstrate my issue, I exported two projects from iMovie, both using the Export via QuickTime menu option, set at Movie to QuickTIme Movie, 1280x720, H.264, 24fps:
- Movie 1 is an 8:20 video. (All library video taken by the same camera and imported into iMovie at the same time).
- Movie 2 is a :15 test video using a clip from the same source as Movie 1.
Next, I used QuickTime Player 7 Pro to export Movie 2, the short test clip, using the Movie to Apple TV setting. It yielded a 1280x720 .m4v file, just as I wanted. With that test completed, I moved on to the full video.
When I exported Movie 1, the full 8:20 movie, using exactly the same setting in QuickTime Player 7 Pro, it produced a 960x540 .m4v file! Repeated exports yielded the same results.
How can this happen? How do I get the1280x720p Apple TV-compatible file that I want?

Thanks for the detailed reply. I have exported movies from iMovie many times with the "Export using QuickTime/Movie to QuickTime Movie" Share menu option. Despite the fact that Apple literature states that TV1 will play an H.264/AAC 1280x720, 24fps MOV file, I have never been able to get one to play. It won't even sync. (I get an error message stating the sync didn't work because the file is incompatible with TV.)
Sorry for the delay in responding. Wanted to check a couple of files on the TV1. Don't have many files encoded at 720p24 and have re-converted most for better AC3 DD5.1 quality at 640 Kbps for the TV2 units.. In any case, wanted to make a quick check to see if they still played with increased specs after the last update. Files play but only for a few seconds before freezing. Thought it might be to to wireless streaming to the TV1 so I tried synching a test file but it played the same way. Only files that still play are 540p30 files. Not sure if they have really "killed" 720p or not as a couple of trailers (Thor and Captain America) play at 1280x544 (i.e. 2720 macro-blocks) which is significantly more than my 960x540 (2040 macro-block) files. Might be interesting to see if a 960x720 PAR encoded file will still play on the TV1. (Not that it would help you but it is a matter of some curiosity for me.)
I spent much time at my Apple retail store trying to see what I may have done wrong. The Apple Geniuses there confirmed with me that TV1 will not play this type of file. (I have no experience with TV 2, but I would be surprised if the results were different.
Then be prepared to be surprised. The TV2 plays the 720p files just fine even with the increased audio data rate for the secondary AC3 DD5.1 surround sound. In fact, I am seriously considering the retirement of the TV2 so I can watch all files without having to worry about frame rates. (Besides, my wife keeps complaining that the bedroom TV (the TV1 unit) doesn't play her Netflix "chick flicks."
I just tried renaming the MOV file to M4V. It now syncs with my TV. Unfortunately, it still won't play. The error message on the screen states "The format was not recognized."
Strange, my files are recognized, stream, sync, and play (albeit with frozen video as sound continues) whether I use a real M4V or MOV file container. (Don't have an MP4 720p file to test at the moment.)
So, I am forced to export and then convert. That said, I am embarrassed (but happy) to admit that I found the solution to my QT 7 Pro problem. As I experimented further today,I found that my test file (Movie 2) was exported by iMovie at 24 fps and the full movie was exported at 30 (29.97) fps. QT 7 Pro must have forced the conversion to 960x540, which would be the only way a 30fps file would play on TV. Once I corrected the setting and exported again at 24fps, the QT 7 Pro conversion to 1280x720 worked as it should.
Glad you were able to settle that issue.
If you or anyone knows of a way to export from iMovie into a 1280x720, 24 fps format guaranteed to be compatible with TV1, please post instructions. Until then, I will have to keep using an intermediate export first and then Handbrake or QT 7 Pro to convert.
It's not really possible to guarantee that every file will be playable since the content actually drives the encoder and may require changes to user settings on occasions. However, having said that, I take it you did not try the "Export using QuickTime.../Movie to MPEG-4 Movie" Share menu option previously suggested. It will allow you to create an H.264/AAC 720p24 TV1 compatible MP4 file directly from iMovie. Here is a "quickie" file I exported from iMovie moments ago which plays on my TV1.
QuickTest.mp4

Problems with Quicktime update

I just downloaded the latest Quicktime Update and then opened FCP 5 on my PowerMac G5 with 4 GB of memory. I can't do anything. I have 80GB of space on my hard disk plus a couple of Firewire drives attached. If I click on Preferences and anything else on the menu bar it takes forever (I actually give up) before I'm given a drop down menu. Is this a Quicktime Problem?

Hmmm. I don't have an answer to that, but I just installed the latest Quicktime Update last night on my TiBook 1Ghz and after the restart my airport will no longer auto-connect to my wireless network. I have to connect manually now. I don't see how the two would be related, but that is the last thing I did before things went bad!
Any help would be appreciated.

Adobe Acrobat 9 Standard Install with all Updates - Transform Issues

I'm new here so forgive me if this has already been answered someplace and I missed it.
I am running windows XP SP3 and have Adobe Acrobat 8 Standard installed on my system.
I am attempting up install version 9 standard with all the updates (9.1 through 9.4). I have used the Csutomization Wizard 9 to assist in this process and I have also downloaded and save all the update files in the same folder as the AcroStan.msi file. Below is my setup.ini file contents. when I run setup I get the following message "Error applying transforms. Verify that the specified transform paths are valid." Any help would be apprciated.
========================================================================================== ======
[Startup]
RequireOS=Windows XP
RequireMSI=3.0
RequireIE=6.0.2600.0
CmdLine=/sPB /sl"1033"
[Product]
msi=AcroStan.msi
Languages=1033;1031;1036
CmdLine=TRANSFORMS="AcroStan.mst"
msiexec.exe /i "C:\Documents and Settings\kortekaasj\Desktop\Adobe Acrobat 9 Standard\Adobe Acrobat 9 Standard\AcroStan.msi" PATCH="C:\Documents and Settings\kortekaasj\Desktop\Adobe Acrobat 9 Standard\Adobe Acrobat 9 Standard\AcroProExUpd910_all_incr.msp;
C:\Documents and Settings\kortekaasj\Desktop\Adobe Acrobat 9 Standard\Adobe Acrobat 9 Standard\AcrobatUpd911_all_incr.msp;
C:\Documents and Settings\kortekaasj\Desktop\Adobe Acrobat 9 Standard\Adobe Acrobat 9 Standard\AcrobatUpd912_all_incr.msp;
C:\Documents and Settings\kortekaasj\Desktop\Adobe Acrobat 9 Standard\Adobe Acrobat 9 Standard\AcrobatUpd913_all_incr.msp;
C:\Documents and Settings\kortekaasj\Desktop\Adobe Acrobat 9 Standard\Adobe Acrobat 9 Standard\AcrobatUpd920_all_incr.msp;
C:\Documents and Settings\kortekaasj\Desktop\Adobe Acrobat 9 Standard\Adobe Acrobat 9 Standard\AcrobatUpd930_all_incr.msp;
C:\Documents and Settings\kortekaasj\Desktop\Adobe Acrobat 9 Standard\Adobe Acrobat 9 Standard\AcrobatUpd931_all_incr.msp;
C:\Documents and Settings\kortekaasj\Desktop\Adobe Acrobat 9 Standard\Adobe Acrobat 9 Standard\AcrobatUpd932_all_incr.msp;
C:\Documents and Settings\kortekaasj\Desktop\Adobe Acrobat 9 Standard\Adobe Acrobat 9 Standard\AcrobatUpd933_all_incr.msp;
C:\Documents and Settings\kortekaasj\Desktop\Adobe Acrobat 9 Standard\Adobe Acrobat 9 Standard\AcrobatUpd934_all_incr.msp;
C:\Documents and Settings\kortekaasj\Desktop\Adobe Acrobat 9 Standard\Adobe Acrobat 9 Standard\AcrobatUpd940_all_incr.msp"
TRANSFORMS="1036.mst"
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=2
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
========================================================================================== =======

Call Adobe, they should be able to help with this. Nobody else can solve it, there is no workaround except to have Adobe change their records.

Need some URGENT help with 3 DVD mastering issues PLEASE! :

Hi there,
Firstly, I am running DVD SP 3.0.2 on Mac OS 10.4.7 on a G5 Dual 2 GHz 3Gb Ram plenty of HD space...
I am creating a DVD with: An intro sequence, a main menu, 4 sub menus, and 4 sections with around 12 chapters each.
I am having some big problems, and a pretty stuck. I will lest them separately below, numbered. If you are able to help, please refer clearly to which number you are helping with. Any help is MUCH appreciated! Many thanks!!
1. Each of the 5 menus (1 main, 4 sub) have a background video, and a separate audio track. I added the background videos by simply dragging them to the assests panel, then from there onto the menu editor window. They are created in FCP and are properly encoded. However, when I click the motion button, or use the simulator, the videos do not show up. The music plays, but all i see is plain black.
What is going on?!?!?!
2. I am really struggling with rollover buttons. I have custom created buttons, and I wand them to have a soft red glow around them when hovered over. HOW ON EARTH DO I ACTUALLY DO THIS??
The buttons are in photoshop so can be exported with/without background/glow in any format.
3. Is it possible, once I have got the above rollover working, to have an image to the right hand side of my buttons which changes with the the button rollover. i.e. hover over button 1, see image 1. hover over button 2, image changes to image 2.
PLEASE PLEASE give any help you can, I have a deadline coming up and am quite stumped. Thanks again!!

I am still having problems regarding issue Number 1. PLEASE ANYONE HELP?!
Sorry, I'm not sure about the motion menus. I avoid those whenever possible. But you might click on the menu in the storyline tab (whatever it's called -- the hierarchical view with the disc, tracks, slideshows, etc.) and look at the properties and see if there's anything you have to enable specifically for motion. And be sure the motion button is on on the main display/preview area, but it sounds like you already know how that works.
For your information, here is a screen grab of the menu I am trying to create:
http://www.redhavoc.co.uk/stuff/menu.jpg
I think it is obvious that when a button is hovered over, I want it to glow red, and the image to the right will change to match the respective button.
IS THIS GOING TO BE POSSIBLE????
Yes.
First, your menus have to be layered menus. Unfortunately, there's no way to convert non-layered menus to layered menus, so if you already have non-layered, you'll have to just delete them and create new layered menus. The button (and menu item) to create a layered menu should be right by the normal new-menu item.
Next, the graphical work is all in Photoshop.
Side tip: You may already know this, but I found it's best to use 640x480 for the Photoshop document. When I do text and leave it as a text object in the Photoshop file, it resizes poorly in DVDSP. So this ends up being another 720x480 vs. 640x480 square/rectangular pixel conversion thing. DVDSP plays in the 640x480 world, at least as far as the designer can see. So I keep my images at 640x480, and it doesn't have to resize, and everything looks right.
Moving on... Set up your basic background, the part that won't change (or will have other things covering it, like for your square image).
Then put in all the buttons and images you'll be using, each part in a separate layer. This could have fifteen buttons (you have five buttons, and there can be three versions for each -- inactive, selected, and activated versions) and five or six square images (you said one for each button, and you might want a blank default if, say, you want to add a "back" button on the menu and want some blank or default image for the square when they're on the "back" button).
Sometimes people don't bother with a separate "active" button state, but you usually want some visual feedback that they clicked the button. Also, I usually just build the default (unselected) button into the background; that's less hassle later on, and it will just draw the selected or activated buttons over that when the user is on that button.
Line up all your buttons and images. All the square images lined up perfectly on top of each other, all the buttons in the right places (so you'll have three buttons stacked on top of each other in each spot). Give each layer a short but quickly recognizable name, and line them up in a consistent order. (button1-default, button1-selected, button1-active, button1-squarepicture, then button2-default, ... etc.) Photoshop and DVDSP don't care, but it makes it easier for you later.
Note that earlier versions of DVDSP won't show Photoshop layer effects. (They handle layers, just not the effects, like inner glow, outer bezel, etc.) I don't remember when they changed this, but I think it was version 4.something. So if you're using that method to make your buttons glow, you may have to flatten each selected or active button layer, and you may even need to create a dummy blank layer underneath it first to give it something to flatten onto.
Save the file as a standard Photoshop file (.psd). Drag the file onto your DVDSP layered menu and set it as the background.
Now, in DVDSP, create all your buttons. Just drag boxes over/around the button pictures you have. Feel free to make them extra-big; users won't see the actual area you've selected, and bigger areas makes it easier for people to hit them if they're using a mouse on a computer to watch the DVD. You can point the buttons to their targets now if you want, and set the end jumps on the tracks if you want. (I tend to set the end jumps on the tracks so they automatically select the button for the next track.)
Now's the fun part, since it will actually hook everything up and should be easy if your naming layer order were consistent. Click on the layered menu (in that hierarchical view) and look at the properties window. (Sorry I can't remember the technical names for all these windows; I'm doing this all from memory. So feel free to ask more questions if you can't find what I'm talking about.) One of the properties tabs should have a grid of checkboxes with a list of your layers. Make sure the background is checked for all of the states. Then check the layers you want to show for each button state, as well as the corresponding square image to show for each.
Again, I'm doing this from memory, and I can't remember exactly how things are listed in that grid. But I remember it keeps your layers in the same order you put them in the Photoshop file and shows you those names, so it should make it easy to go down the list and check the right boxes.
And another side tip: You can update the Photoshop file, but once you've put it in DVDSP, if you change the layer order, it will screw up the check boxes you checked. It always shows you the layer names correctly, but it keeps the checkboxes in DVDSP simply assigned to the layer number, so the fifth layer will keep the same checkboxes even if you juggle them so some other layer is now the fifth layer. So if you do juggle the layers in Photoshop, go back and fix the checkbox list in DVDSP.
I put a sample Photoshop file based on yours in
http://dan.black.org/layered-menu-sample.psd
It's quick and dirty, but shows the layer layout, and you should be able to drop it on DVDSP to play with. (I also won't leave it there forever, maybe a few weeks, so anybody reading this in a month or more probably will get a 404 for that url.)
Again, doing this from memory, so feel free to ask if anything doesn't work or doesn't make sense.
G4/dual867 Mac OS X (10.4.5) 2GB/0.8TB

Help with replicating/updating vendor master data

Hi,
Currently, we run the bbp_vendor_sync program to do the replication. It does the job of both bbpgetvd (new vendor creation) and bbpupdvd (update existing vendor).
But the problem is, we have two number ranges for vendors. One is Numeric and other one is Alpha.
Group -->AB From 0010000000 to 0699999999
Group -->AZ From A to ZZZZZZZZZZ
The vendor synchronization program can consider only one number range at a time i.e.
either Numeric or Alpha. So, we have to switch the active number range
and run the program twice., first for numeric and then for alpha.
In order to avoid this, I'm looking at implementing bbp_transdata_prep which I was told would take care of this issue.
I looked around for documentation/sample code for bbp_transdata badi and couldnt find any on SAP help site or SDN.
Wondering if someone can help with the documentation/sample code and difficuly level of implementing this BADI.
Any help would be highly appreciated and suitable points would be awarded for your help.
Also, if there is another way to solve this issue without implementing transdata badi, pls. let me know.
TIA,
Seyed

Hi
Please go through this ->
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/42/d3b671ba67136fe10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/bb/6c0e3b02616a42e10000000a11402f/frameset.htm
Sample BADI Implementation
BADI Definition - BBP_TRANSDATA_PREP
Purpose -> Impl. for BBP_TRANSDATA_PREP, Delete Invalid Mail Addresses
PREPARE_REPLICATION_DATA method ->
method IF_EX_BBP_TRANSDATA_PREP~PREPARE_REPLICATION_DATA.
FIELD-SYMBOLS: <LFS_ADR6> TYPE ADR6.
LOOP AT CT_ADR6 ASSIGNING <LFS_ADR6>.
 IF <LFS_ADR6>-SMTP_ADDR NS '@'.
 DELETE CT_ADR6.
 ENDIF.
ENDLOOP.
endmethod.
PREPARE_UPDATE_DATA method ->
method IF_EX_BBP_TRANSDATA_PREP~PREPARE_UPDATE_DATA.
FIELD-SYMBOLS: <LFS_ADR6> TYPE ADR6.
LOOP AT CT_ADR6 ASSIGNING <LFS_ADR6>.
 IF <LFS_ADR6>-SMTP_ADDR NS '@'.
 DELETE CT_ADR6.
 ENDIF.
ENDLOOP.
endmethod.
Hope this will help.
Regards
- Atul

PRE/Mac installation errors (was Please Help with PSE 12 Download)

Can anyone help with a .CPP-283 and a .CPP-683 error?
[/Adobe/premiere/elements/main/CAHeadless/Make/Mac/../../Src/CAHeadless.cpp-683]
[/Adobe/premiere/elements/main/MediaCore/ASL/Foundation/Make/Mac/../../Src/DirectoryRegist ry.cpp-283]
I've spen the better part of days trying to get this thing to run, to no avail. This is the only program I've tried to install in the 3 years I've had this MacBook where I've had issues......
Anyway, it was downloaded from a disk on OS 10.8.5
Thanks in advance.

Have you tried these fixes?
http://forums.adobe.com/thread/940869

Help With Quicktime Update Download Issue?....No DMG format? Only Windows?

Similar Messages

Maybe you are looking for