Help with recording setup
Hi all.
I need help how to record directly from camera through firewire while I also record Audio from my firewire soundcard.
Right now I record the audio and some midi into logic.
Im using a macbook pro with only one firewire port.
Can I solve this buying a Firewire hub?
And Can I record directly from 2 cameras at once??
Hope you can help me, so I can start using my newly bought final cut pro.
Regards
Mujan84
The first question is why you would want final cut pro in this loop at all? FCP is an editing application, not a production tool.
A firewire hub will not help.
Oe camera at a time. You might think about putting a switcher into the equation. Capture the switcher feed into FCP, and make sure both cameras are recording as well. Then you can go back in and correct any missed switches or re-edit what you did on the fly if it seems right to do it.
Remember that capturing live into FCP is the weakest link in your chain. All you need is to trip over the power cable and you are hosed.
If you find the right mixer/switcher combo, you can feed the audio stream into another computer. With multiple cameras, a switcher and two computers capturing information, time code is critical. The best scenario is to send identical code to all devices-- that way you'll have no issues getting it in sync-- just match the numbers. But at least make sure all devices are code-driven.
Similar Messages
-
Im nw to java and I need help with records. Can you please tell me how to make a record called car, store the make and model and display them like the structure chart below( yes its a structure chart).
================ main =========
=============== / === \ ========
============= / ======= \ ======
=========== / ========== \ =====
========= get car ======= display =
========= record ===============
======== / ===== \ ==============
======= / ======= \ =============
====== / ========= \ ============
=== get car ======= get car ========
=== make ======== model ========
==============================welcome to world of java...
here is a skeleton structure of what you want..
class myCar{
public static void main(String args[]){
myCar car = new myCar();
car.displayCar();
System.out.println(getCarRecord());
void displayCar(){
// display your car image here
String getCarMake(){
// returns String containing make of car
String getCarModel(){
// returns String containing model of car
String getCarRecord(){
return getCarMake() + " " +getCarMake();
maybe this helps -
I Hope I'm in the right forum, If not let me know where this post should go.
Thanks for helping me out. I have some questions regarding my setup and acquiring new gear. Currently, I have a the following setup:
IMac - newer model
Logic Pro 9
Numark tt-usb turntable
Stanton DJ mixer
Pair of Yamaha HS80 monitors
MPD 24
I would like to add a keyboard controller (I'm thinking of the new Korg Microsampler). Basically, I'm willing to get the microsampler as long as it can Fully function like a controller, which can control logic synths & plug-ins(axiom, mpk, etc.) and as well as it's own features. Furthermore, I would like to to be able to record from my turntable to logic and into the microsampler. I understand I would need an interface. Would I still need the mixer? Would the M-Audio Firewire Solo work with my setup?
Would a control surface take place of an Interface?
I am possibly interested in getting a control surface that works good within logic. I was looking at the Euphonix MC Control, it seems to work great with logic. Is there an cheaper alternative? Also, I would like it to be user friendly, I am new to this.
Essentially, I want everything to work simple & smoothly. I like to make sample based music from records. Can you give me a rundown of the necessary items I'm going to need...cables, interface, etc.
Sorry, if I'm rambling just want to be clear.
I appreciate your time....I use a Alesis multimix FW and a presonus inspire.
I would guess that you should always get dry sound from any output with firewire plugged in or not. My inspire uses a software control panel to route signal and the Multimix is all hardware. I have no clue how to route signal with the firebox but it has to be one or the other. Presonus is pretty good with updates and bug fixes did you check for new drivers? -
Need some help with guitar setup...
jeez, never thought i'd be asking a question like this after playing for like 20 years, but i need some help with a guitar setup for mac. i'm gonna list out a lot of crap here that prolly doesn't affect anything at all, but here goes.
Imac 17inch G4 - latest updated OS X... 10.4, or 5, or whatever. garageband 3.0
digitech gnx-3
alesis sr-16
sure mic's
yamaha e203 keyboard
here's the setup:
yamaha is on its own on a usb uno midi interface, sure's connected to gnx's xlr port, alesis connected to gnx's jam-a-long input, '87 kramer vanguard connected to gnx's guitar input. currently running headphones out on gnx to line in on mac.
here's the problem:
everything works beautifully, but my guitar sounds like crap. if i plug headphones into the gnx, it sounds beautiful. that makes me think its some kind of level issue between the gnx's output, and the mac's input, but nothing seems to fix it.
by sounding like crap, i mean way too much bass. sound is muddy, blurry, not crisp... aka crap. i've tried altering both output and input on mac and gnx, and i cant get a combination that works. the gnx has a s/pdif out, can the mac accept that as input? might that help? short of running the gnx to my marshal half stack and mic'ing that, anyone have any suggestions, or use a similar setup?
any help would be greatly appreciated!anyone? ... any suggestions? I think it might be an issue with the gnx pre-amping the signal as it goes out, and then the mac amping it on the way in, giving me a buttload more signal than i need, but since i cant find a happy level, i'm not really sure. i really dont want to resort to mic'ing my marshall... even with the volume almost off, my jcm900 is WAY too loud for apartment use. its not like i really NEED the guitar to sound perfect, i only use garageband to sketch out ideas for songs between myself and bandmates, but its really annoying to not have my customary crisp distortion. my bass player keeps telling me to use the built in amps, but, not to dis a practically free program, but the built in amps blow, at least after 10 years of marshall tube amplification they do. if anyone has any suggestions that might be helpfull on how i might resolve this, i would be your best friend for life and go to all your birthday parties
-
Need help with Printer Setup conventions
I can't get my Brother printer to print from one computer--but it prints okay from the other computer on my network. I need to know the conventions for the Printer Setup Utility.
There's a checkbox by every printer on the list. What does it mean when the checkbox is grayed out?
Some printer names appear in bold. What does that mean?
Thanx.Thank you for your reply. I appreciate your help in this and just want to understand what you're saying.
As I say, the printer is displayed in the print dialog box but the checkbox is grayed out. I'm assuming that when you say "...it can't find/see them now," you mean the print dialogue can't see them (the drivers). Your last sentence confuses me. You say, "Do you maybe have Printer Sharing enabled & they aren't actually directly connected? If so you have to reboot after turning it off." A little confusion about your antecedents here. What isn't actually connected? The printer? So I have to reboot after turning it off, "it" I suppose is the printer, is that right? I will try that. So turn printer off, reboot, turn printer on. Right?
I will describe my problem. l thought that if I understood why the checkbox was grayed out I might see what my problem was. If you want me to start another topic I can do that.
Problem: I have a network with 2 computers and the Brother
multifunction fax/printer. I'm using an Apple airport hub. The printer
and one computer (Mac tower) are connected to the airport base via
ethernet. The 2nd computer (Apple laptop) is on the wireless network.
Until recently i could print from both computers. Now I can't print from
the tower. But I can still print from the laptop.
When I try to print from the tower I get an error message that says, "Cannot print from current printer." I have rebooted, reinstalled printer drivers, checked cables, deleted printer from printer list and re-added printer all to no avail. But as I say, I can still print from the laptop which is using Airport. So the printer prints, the hub connects to the printer okay (ethernet) and I know the tower connects to the hub (I can ping the printer okay from the tower.)
I am conversing to Brother support via email and their first suggestions I have already tried. Perhaps there's some problem in the network, but I can't figure it out. Worse yet, now when I go to the Network preferences I get an error message which says, "Your network settings have been changed by another application." THIS ERROR MESSAGE WON'T GO AWAY! I can click 'okay' but it reappears. I have to force quit the System Preferences to get out. If you can help with any of these problems I surely appreciate it. -
Hi I need help with my new infinity setup
seanyg wrote:
Hi I need help with my new infinity setup
Surely the openreach engineer did most of it, the rest as said is just plug and play.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button. -
Help with recording measurement
Hi all,
I'm trying to take voltage/current/resistance measurements from a Keithely sourcemeter and plot them on charts. There's also the option to record the measurements upon pressing the "record" button, which then would prompt the user for a path name. After the 'record' button is pressed again, the file is saved and closed. During the entire process of openning file, recording, and closing the file, the measurements should be plotted onto the charts uninterrupted.
I've used a state machine pattern, with the value of the 'record' button as input to decide the state transitions, used in a "select" gate. However, when I run the VI, the state transitions never happens, pausing the execution and probing the value of the button yields that its output stays the same regardless of the state of the button.
I've set the operation of the button to "switch when pressed".
I know this is a common task, but I'm pretty stumped about how to fix this. The VI file is attached, any pointer is appreciated.
Thanks
Solved!
Go to Solution.
Attachments:
read_current_save.vi 36 KBThe typedef enum will solve the problem of the names. Once all sources (controls or constants) connected to the state wire in every case and outside the loop are all copies of the same typedef, the names will return.
What happened was that you changed one of the enums or created a new one. It had a different data type. Yes, it was still an enum and still produced a U16 integer, but because the items in it were different, it was considered a different data type. When two different data types are connected to the wire going to the selector terminal, the case structure attempts to find the common "denominator", in this case a U16 integer, but not the enum.
I converted the enum constant you had with "record" and other values to a type def and copied it several times. When I replaced all the other state enums with that type def enum, the names came back.
Lynn -
Help with DNS setup for LAN only
I have a Mac Mini SNS 10.6.8 as our company's local standalone fileserver.
Everything has ran great for the past year (still is), but now I want to try and setup DNS for more control and services.
The server host name is servername (no FQDN), which shows up in Server Admin as servername.local.
I read and followed Hoffman Labs great step-by-step, but must have missed something, since I still cannot get DNS resolution.
Here is a brief summary of the Server Admin settings:
Host Name servername
Host (Server) IP 192.168.4.2
Router IP (also default public DNS IP) 192.168.4.1
Bonjour Wide Area = Not enabled
Settings Accept recursive queries = localnets
Settings Forwarder IPs = 8.8.8.8 & 8.8.4.4 (Google Public DNS)
now... Zones 1 Primary Zone = companyname.net (we own the domain)
Primary Zone Name = companyname.net
Nameserver Zone = companyname.net
Nameserver Host Name = servername.companyname.net
2 A Records:
servername 192.168.4.2
user1 192.168.4.3
Reverse mapping - automatic - OK
Testing Ran sudo changeip -checkhostname
Results:
Primary address = 192.168.4.2
Current hostname = servername
The DNS hostname is not available. Please repair DNS and re-run this tool.
I must be doing something wrong, but I don't know what it is. Please help.Did you intend to have both "example.com" and "example.net" listed there? Are those domains really different? I'm going to assume that was an obfuscation error. (This is part of the "fun" of obfuscation, unfortunately. Of having to differentiate errors in the actual configuration from errors that were introduced during the obfuscation.)
>Oddly, even though I had manually assigned our Comcast gateway's DNS to Google DNS IPs, the gateway summary still shows up as Comcast's DNS server IPs. So I removed the manually assigned Google DNS IPs from the gateway.
The gateway (or whatever you're using as your DHCP server) should be configured with the DNS server address of 192.168.4.2. All other hosts on your network (if you're planning to use your local DNS everywhere on your LAN) should also reference 192.168.4.2, either through an explicit static configuration, or as the address that was received from the DHCP server.
And as for IP routing, are all your hosts, network printers, network gateways, DHCP servers, etc., all in the range of 192.168.4.1 to 192.168.4.254? (They should be, if you're using a /24-class 255.255.255.0 subnet mask.)
But then I don't know where this configuration has gone off the rails... (Over the years, I've seen and have made my own configuration errors, I've been "bagged" by DNS caches, and I've hit various bugs in DNS implementations.) What you have stated here should work.
I'd start at the top of the DNS configuration article, and not stray from what is written there. That there has been Google DNS and have had ISP DNS configured at the gateway does mean there were some areas that have strayed from the article. I'd suggest following the DNS server configuration directions exactly.
Setting up DNS services with OS X Server isn't difficult, but it can be a little fussy.
If you don't understand something that's written in that article -- or if you believe you need to enter something different than what's listed there -- then please stop and ask about it. Either ask here, or ask over there. (This feedback also helps improve that article.)
Straying from what's written in that article is certainly and entirely feasible, but that's something best left until after the adminstrator is more familiar with running a DNS server. Once you know how and why and where you can stray, there are all sorts of things you can do within a DNS configuration. -
Help With Recording both Microphone and Audio Playback Simultaneously
I am trying to record both my own microphone and another audio source at the same time. The other source is a VOIP program. When I try to set up a multitrack session I can only select either my Microphone or The sound card as my input for the tracks. When I try to set up one and then the other, I have to change my default input device from the audio hardware settings which then excludes the other device from being used. I am following the steps in these two videos here:
http://www.youtube.com/watch?v=TAJ9rXepKZc
and
http://www.youtube.com/watch?v=TAJ9rXepKZc
Thank you for your help.Since Audition inherently uses ASIO, the windows driver you see in the hardware setup is translating the built-in driver information (not ASIO) to this standard. The ASIO4ALL driver, which you can download for free, has some advantages in this regard; it will let you see all of the devices connected to your system with valid windows drivers and possibly let you connect more than one at a time - although I'm not promising that this will work... (although it seemed to in the video)
The thing you have to understand about ASIO is that it bypasses a lot of the OS, and inherently will only ever work with one device at a time. Fortunately, ASIO4ALL counts as a single device, and to that extent, Audition doesn't care what's connected to it. You may yet run into difficulty though, because your mic and Windows internal hardware aren't synced together, and ASIO4ALL may regard this as an insuperable problem. The reason that I think it might work though is that your mic is a USB device, and the drivers for this are a little different. Normally we regard USB mics as being a right PITA, but in this case it might be your saving grace - I don't know.
The usual solution to this problem is to use an external sound device with more than just single inputs and outputs, and with an ASIO driver. This method doesn't use 'what you hear' at all, but routes the software feed from your VOIP package straight to one output, which you feed to a small external mixer. Into the mixer, you plug your external mic as well. The mixer output goes to another pair of inputs on your sound device, and this is what you record in Audition, generally you on one channel and the incoming caller on another (or you can use a stereo pair split left and right). The advantage of this is that you can monitor the call on the mixer, and once you have the levels set about right, just concentrate on the call - final level tweaking, which is invariably needed, is easy, because you've kept both sides of the converstation on different tracks. -
I need help with my setup Please !!! 2800+ athlon xp
hi all .......... great forum here.....!!!
I am having probs with my new setup and I am at a wits end of what to do so i'll explain my problem.
I have just bought a AMD athlon 2800+ cpu for my mobo (KT3 ultra 6830e v.1.0)
and I am unable to run the chip at correct speed??
The bios wont boot the computer if I try to set the fsb for cpu at 166 ?? Am I correct in thinking that a 2800+ Athlon needs to be run at 166fsb to get the 333fsb setting?
I am currently running it at 133fsb and it is registering it as a AMD 2200+ chip ???
I am quite new to playing about with my bios but at the moment it is set at defaults on everything because i had to reset the cmos jumper about 8 times last night after trying different settings, in the end i gave up and thought i'd ask u guys for help???? Please !!!
I spoke to the shop i bought the chip from and we got talking about that when i set the fsb for chip to 166 it changed the ram settings to host clock + 66 (host clock was set at 100mhz) thus trying to make my 2100 ram(266) run at 2700(333) specs ?
Is this the problem why my computer wont boot when it is set to 166 fsb cuz it is asking the ram to be 333ddr when it isn't???
Is my problem going to be solved if i purchase some 2700 ram ?? if so i'll be quite happy, or is my board just not capable of running this 2800+ cpu on it???
i read up b4 i bought the cpu and i thought i was able to run this chip maybe i read wrong? any help would be greatly appreciated , oh i also flashed my bios to the most recent msi update which was 5.7 i think (AMI bios) and the flash was succesfull (LOL) very worrying!!!!
anyway hope i have explained my problem well enough as i myself am very confused!!!!
Thanks in advance
Davei have just had a look around the net and it looks like there are two versions of the 2600+ available one with 133/266fsb support and the other with 333fsb ???
Do u know that if i take my 2800+ back to the shop and change it for a 2600+ cpu if i should just get a normal one(133/266fsb) or get the 333fsb version???
as that link u posted for the mobo supported cpus only lists the 2600+ as being a 133/266fsb chip ???
I will get some 333ddr ram as well just incase i need this to allow the 2600+ to run correctly
Also (sorry to be a pain) but can you explain to me how to change the multipliers correctly to get full power from the chip ?? as i read that a 2600+ comes out at 1.91ghz standard , but i was reading a review where the user was told by AMD that it will run higher by changing fsb or multipliers (or both?) ???
Do u have to set the fsb to 133 and then change the multiplier to a value to up the speed or just keep changing the fsb alone and leave the multipliers alone ????
Hope you can help me......
Thanks once again for your replys..
Dave -
Help with recording midi instruments : two sources at the same time
Hi -
I'm trying to learn Logic after using Performer for years, and though the audio is fine, I just can't get the midi to work doing something really simple.
I have a MOTU midi express XT, which is an 8 channel midi interface. Piano plugged into channel 1, drumkit plugged into channel 2. I want to play both and record both, which should be easy, but I am stuck at the first hurdle.
So, new project, add a midi track for the piano, and select XT1 and plays and records fine. Add a track for the drums, and try to put it onto XT2, and now the keyboard plays the drums when I press the keys. Likewise, the drum kit triggers the piano. I have tried unchecked auto demix by channel but that doesn't help.
This ought to be trivial, but even with the manual, I cannot figure out how to simply choose midi input and output per track.
If anyone has a tip I would be very grateful!
thanks
Stevegoldensteve wrote:
I believe that I have followed your instructions, but I am seeing the same result: both midi sources trigger (and record) each other. Hmm.
It looks like the midi channels are not set properly or something like that...
What kind of midi tracks have you created - Software Instrument tracks - if yes set their midi channels to 1 and 2 ? If you have created Standard Instrument objects and want to use them with external sound device check the midi channels of these Standard Instrument objects again in the Environment of in the Arrange track Inspector - they must be set to ch.1 and ch.2.
If you use a Multi Instrument set it to ch.All in the Environment and create tracks for its sub midi channels 1 & 2 in the Arrange.
The Autodemix by midi channel Logic setting must be enabled as Bee Jay mentioned as well both tracks must be armed "R" !
Go to Click & Ports Environment layer and have a look at the "Input View" Monitor to check the incoming midi channels of the external instruments. Play a piano note(let's say C2) on the first instrument which is set to ch.1 - you must see some midi message like:
"1 C2 56" in the Monitor - which means ch1. Note=C2 vel=56.
Trigger a drum note (A2 for example) on the second instrument (Drums Set) on ch.2, so it must be shown as "2 A2 78" which confirms that the midi channel i.s OK. If not, then you must check you hardware settings again etc.
PS. If these re-instructions do not solve your problem, please provide a download link of this Logic project song so we can check up it. Make a short description on which tracks you try to record or just name them "Piano" & "Drum Set" something like that.
!http://img59.imageshack.us/img59/4967/aglogo45.gif! -
Here is my scenario.
We're dealing with a partner in Germany. We will be shipping them parts from the US and need to slap on a 19% VAT surcharge when invoiced.
I can get the VAT to calculate correctly on the SO and Invoice, the issue is that it will not post to accounting because of the below error:
Tax statement item missing for tax code O1
Here is my setup:
I am using condition type MWST, access sequence Country(US)/Destination Country(DE) Amount 19%, Tax Code O1
In OB40, under key MWS, I have the GL account entered for the Tax Code and Accounts are determined for Tax Code.
I looked at the GL itself and in the control section, the tax category has a * meaning all tax types are allowed. It's also configured to post w/o a tax code present.
I'm at a loss, is my setup missing something or completely incorrect?After kicking this around for a few days I'm still lost as to the issue
The new error I get is "Condition type MWST tax code O1 does not exist".
"When calculating tax, the system tried to determine the
condition amount and the condition number from tables A003
and A053 using the specified condition type and tax code.
However, no values were found there."
I discovered this SoldTo had a jurisdiction code and as soon as I removed it, I got past the earlier error and run into this one now. It appears it defaults to the jur. code for our main office if one isn't assigned to the sold to. I looked at these tables and these are the condition tables behind the MWST access sequence for tax condition types.
Here is my scenario again, please help me confirm I am approaching it the right way.
Need to collect 19% VAT when shipping from US plant to Germany.
I am using condition type MWST on the pricing procedure and this has an entry in VK13 to apply the 19% tax based on source/destination country. This seems to be working, it pulls it in ok onto the order in the tax field. I am using tax code O1 in the VK13 entry. I assume this is used in conjunction with the TAXUSJ procedure and will be used to calculate the right tax amounts.
I assume that since the source country is US, the tax calculation procedure TAXUSJ is where I need to do any config. I added a MWAS condition type which points to AccKey MWS. However, in FTXP I cannot enter in any percentage here. The field is greyed out. Within VK12, the only options I have for tax codes are from TAXUSJ.
I'm assuming that when trying to post to accounting this is where it's getting stuck since it can't find an entry in the condition tables behind this.
Can someone who's more of an expert on this please confirm my approach is correct. How can I get this tax in the TAXUSJ procedure? -
Alittle help with dual-setup with ati radeon 5770
Hello everyone, I have been trying to setup a dual display with 2 flat panel monitors.
1. A WestingHouse Digital Electronics "17"
2. A Goldstar Company Ltd "23" (Main Display)
Im currently running the gnome desktop, what im trying to setup, is have both the gnome desktop show up on both monitors. For example if I wanted to move something from my main monitor to the smaller one to the left of me, I want to NOT be able to do that, and only have the mouse be able to move accross the 2. 2 Seperate desktops one 2 seperate screens. Im not quite sure what its called, Im thinking maybe its a clone Desktop? Anways, The graphics card Im using is an
Ati Radeon 5770, has 2 vga ports. I currently have the "video-ati" driver installed and works well with my main screen, but im unable to get my secondary screen (to the left of me) working. I tried going into System>>Preferences>>Monitors, and tried tinkering with the display, and tried enabling the 2 monitors and moving them from left to right, to see if that would possibly let it show up or start to function, but only the main screen works. I generated a new xorg.conf, since I didnt have one prior to installing Arch, I was following these to guides
http://en.gentoo-wiki.com/wiki/X.Org/Dual_Monitors
http://en.gentoo-wiki.com/wiki/X.Org/Dual_Monitors/ATI
both are very nice, but Im still not quite understanding yet. Defiantly am trying. I edited my xorg.conf a few times, but got the same results each time, just the screen going blank and X crashing. I have here a copy of my xorg.conf, Xorg.conf.log, and xrandr output
Xorg.conf
http://pastebin.com/hbmdKrfv
Xorg-logs
http://pastebin.com/USZvtAMJ (Im thinking the Vsync and Hsync have something that might help)
Xrandr
http://pastebin.com/2cV95Ef4
Thank you guys!An xorg.conf may not be necessary, but I still find it nice to have the control that the file provides.
In looking over yours, I see several things that could be causing your problems.
First off, I notice that you have Screen0 that is using Card0 and Monitor0. This part looks ok.
When I look at Screen1, I notice that you are using ATI Graphics Adapter1 and Monitor1. I don't see entries for either of those, although you have an ATI Graphics Atapter2, but there is no entry for your second monitor.
I also notice that you are trying to use both radeon and fglrx as drivers. As far as I know (and I don't have an ATI video card at the moment), you can use one driver or the other, but not both.
After you have these things fixed, then you can put in the Screen section in your server layout to describe the positioning of your second monitor.
All in all, the issues that you have to fix are minor, but frusterating if you are too close to the situation.
Good luck. -
I just bought a Perception220 microphone which I am running thorough an M-Audio Mobile PreUSB.
So...my problem is when I go to record in a Logic session individual notes played on an acoustic instrument will sound very nice. When the notes are strummed such as with chords and played harder theres a pretty substantial buzz happening.
Anyone have any thoughts on how they setup their mic's to record mandolin/guitar? Im new to the whole home studio thing so any advice would me much appreciated.Turn down the input ( front ) gain on the M-Audio unit and watch that the meters aren't clipping in logic before you record.
-
I am trying to record an Alesis Micron synth into Logic. I have both cables in audio out on the Micron and they are plugged into the two inputs on my Presonus Interface. Logic recognizes the interface and inputs but there is not sound when playing the synth or recording. I have record enable and monitoring on and I still cannot get any sound. The volume on my interface console is turned up as well The Micron works when plugged into an amp so it is not the problem. I am new to Logic so any help would really be appreciated.
You stated monitoring on, do you mean software monitoring in preferences if so thats cool. Now when you create new audio tracks select input monitoring along with your other settings or click on the i button on your previous tracks see if that works
Maybe you are looking for
-
Is there a way to have security with help without buying Roboserver?
I'm on Robohelp 10, and I publish to Winhelp. I have 11 different roles from which users can choose from a drop-down. My managers would like to restrict access to certain of those roles to those people who are allowed to use certain functionality.
-
I am trying to figure this out. I have the WRT54G3G-st router, if i put my sprint card in it i get download speed of 1.5 meg but a upload of only 60 to 100k if i put the card in my laptop the download is a little faster 1.7 but the upload is much fa
-
My new computer has Windows 8 and so far I did not see any solution for that.Please help me get my purchases on my iPod!
-
Urgent: Problems in Delta load
Hi BW Gurus/Experts, I am new to BW and My requirement is to load deltas from CRM to BW,I have initialized deltas and after some days(appx. around 3days) there was changes in the records so I have created infopackage and tried to load deltas but i ca
-
Re-downloading songs after losing entire HD
My entire HD got wiped after a crash while upgrading to Mountain Lion. I lost all my data. I've since restored my HD back to factory setting and thought I could re-download my purchases on iTunes, but I can't figure out how... There is no "purchased"