Help with recovery on ipod4

Need help in recovery mode how do I get out I tried going though iTunes...

Try using RecBoot or TinyUmbrella.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Similar Messages

Need help with recovery!

Hello, I have a problem, my model is HP Pavilion dv7 6051er.
After reinstalling the OS team got off F11-recovery.
I can not find a solution to your problem, see "Support & Drivers" can not find any software patches that could, would solve my problem. A hard drive intact.
Please help with the decision of the key problems.
thanks in advance

Can't understand this. Try again with a little more explanation of the problem.

Help with recovery please

Hi. I have a probook 455GI ... Unfortunately a few days ago I dropped it flat on the floor from the coffee table. The screen froze, so I switched off and back on, Only to get a black screen telling me to restart (where it gives you 2 options) Both ways ended up giving me a pale blue screen of differing shades. I looked on here and did a BIOS ? Test... The result said I hard a problem with the hard drive, and it was faulty? .. The memory test came up fine... Also, when starting the lights flashed 5 times
Today I have bought a new hard drive... But I'm not 100% how to do a recovery. (Unlike my old laptop where I would insert a disc and away it went)
The laptop came with an 'application and driver recovery DVD' and an 'operating system DVD, windows 8 pro
Question, are these the recovery discs?
Not a lot happens when I insert them,,,, Nothing happens when pressing F11. ... I do get a black screen which says . HP PC hardware diagnostics uefi... With memory test options etc....
On starting and pressing escape,.. I can get a screen with the options ... F1, f2. F7. F9. F10. F12. Enter ....
So any help would be appreciated... I'm not a total technophobe, but answers in plain easy to understand jargon would be great...
Thanks in advance
Jenny

A bit more information.... If I put the old hard drive in, then I get the option of F11...
With the new hard drive I get the message "Boot device not Found, Please install anoperating system on your hard disk".
On doing the bios test for the new hard drive it passes..

Need help with recovery/reinstall of OS

Hi,
I need some assistance repairing my niece's laptop. She has a Toshiba Satellite A305 S6872. She is not tech savvy and has been using it since christmas without any antivirus/spyware protection. It was a huge mess. I was able to remove all the virus & spyware from the computer but it was so bad that the OS was affected and will not function correctly. I have backed up all her data and now it needs to be recovered to factory settings. She never created the recovery disks and now the recovery disk creater won't work... it gets an error about the optical drive in use or not installed and the application won't open. I also tried to boot into the recovery console by pressing 0 at boot but was unsuccessful, it seems like the option is not there or it won't work. I could really use some help here. She is in town for the summer so I only have about 2 weeks to fix it. I know it won't take that long to fix but I don't think ordering a recovery disk is an option unless they can be downloaded. Please help me restore this computer.

I also tried to boot into the recovery console by pressing 0 at boot but was unsuccessful
Since that option is not available, I would bite the bullet and order the discs.
If you like, you can try running sfc /scannow. For some reason, Microsoft has withdrawn the article for Vista. It's virtually the same as for Windows XP.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
But it's my experience that once a hard drive is really infested with bad guys, it cannot be repaired.
-Jerry

Help with Recovery and Time machine

So a friend of mine sent me her laptop to change hard drives. She also sent her Time machine external HDD. I used her drive as a recovery disc using the Lion recovery tool. I didnt see or didnt read any where that stated the drive would be unusable afterwards. But after restoring OSX and moving her data back from the old drive I cant seem to get the Time Machine disc contents. So im trying to get the data from the drive without completely wiping it.
Any suggestions?
She has 13 (black)book late 2007
running 10.7.4

You should not restore a Time Machine backup from one Mac to another one, especially a new one.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Help with recovery disk

I have a m45-s359 the hd took a crap so i bought a new one i could only find a 250g instead of the 100g
that was in it before i found the factory recovery disks 1 of them comes up wrong machine the other
goes through and ask me if i want to continue or about the recovery I hit c to continue and it just reboots
the machine is to old for toshiba to send me new recovery media
any help would be greatly appreciated
thank you

Satellite M45-S359
the machine is to old for toshiba to send me new recovery media
Can't hurt to try these third parties. Please let us know your experience.
   Digitalmedia-labs.com
   MyRecoveryCDs.com
   RestoreDisks.com
   RestoreCD4u
-Jerry

Help with recovery on new hard drive

i have a g42 230us notebook which the hard drive read immenent failure please back up as soon as possible so hard drive is no good i purchased a new hard drive the exact one in notebook the wd3200bekt scorpio black,so i plugged it in and turn on pc , now i get a error message that reads no bootable device---insert boot disk and press any key
ive tried this with and without recovery disk and get same error message ,
notebook came with windows 7 now my question is do i need to install windows 7 os before i run recovery disk or is the recovery disk suppose to install windows 7 and features
please help

Hi,
1. The recovery disc set will rebuild the machine back to factory settings for you.
2. Probably you need to change the booting order from BIOS, you need to boot from optical drive first. To do this, reboot the machine and tap F10 to access to BIOS, chang boot order, hit F10 again to save and then recover the machine using the disc sẹt.
3. Remember to change the booting order back at the end.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HT1212 Help with Recovery for Ipad Mini. Please! My mini Ipad is disabled and I can't recovery it.

Okay so my I dont have my Ipad Mini password, I go to recovery it and it all goes well until it has like 27 minutes left then the Ipad turns on. I have tried to shut it back off and the recovery doesnt work. I have tried switching to another computer and rebooting my computer. I have the latest version of Itunes on it. Please help!!!!
Thank you!

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Weird problems with recovery partition

Hi. I just got a new X1 Carbon a few days ago. When trying to install Ubuntu, I messed up the bootmgr. At that point I still had the option F11 for recovery on startup, but choosing it did not give any results and after a restart, the option was gone. When researching the problem, I found this thread:
http://forums.lenovo.com/t5/ThinkVantage-Technologies/Need-help-with-recovery-partition-create-recov...
Since my recovery partition Q was untouched, the steps described in the thread allowed me to restore partitions S and C. So far so good, but now the problems start.
First, the letters of the partitions get messed up after every reboot. I assign Windows7_OS the letter C, SYSTEM_DRV gets S, and Lenovo_Recovery gets Q. Diskpart then lists the drives with correct letters. But after a reboot, they're back to D,C,E, respectively.
Then, when I boot the Windows recovery disk from a usb stick, it correctly recognizes that Windows is installed on drive D. It suggests that there are startup problems, which I tell it to fix. After the next reboot, it does not warn me about startup problems. When I then go to command prompt and enter
bootrec.exe /fixmbr
bootrec.exe /fixboot
then the Windows recovery disk commits suicide. It seems to attempt to fix its own bootmgr. At the moment, both usb stick and hard disk run with grub (Windows recovery on a multiboot installed by YUMI). After I run the commands above, the hard disk still runs with grub, but the usb stick now has bootmgr and fails to boot. I have tried this several times, each time recreating the Windows recovery disk with YUMI, and every time the same result.
F11 option is of course still gone. At this point I'm out of my wits. Any suggestions are welcome.
Solved!
Go to Solution.

In the end I formatted and made a clean install. F11 Option is gone. Recovery partition is still untouched, but I don't think it will be used again. Followed this advice to install a fresh Windows 7 using a usb stick:
http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html#post1839164
Since I did not have access to Windows with administrator rights, I had to use Ubuntu to create the bootable Windows stick:
http://cloud101.eu/blog/2012/03/24/create-a-windows-7-live-disk-from-ubuntu-linux/
The WiFi driver was not included in Windows, so I had to download that in another system, and install manually. From there I could then go online in Windows to download the remaining drivers from Lenovo (after the clean install there's a long list of unrecognized devices).
Since the laptop comes with 4 primary partitions preinstalled I had to merge the SYSTEM_DRV and the Windows7_OS partition in order to create an additional partition for Ubuntu. Then I installed Ubuntu and took control of the startup behavior using EasyBCD.

Help With New Hard Drive Installation Recovery

I had a bad hard drive crash. I installed a new one and got the bios to boot from the cd drive, with the windows 7
orginal install cd in the drive. It recognized Drive 0, I clicked new in the options. It created ONE System partition.
Installed windows 7 seemingly fine. Inserted the application and driver recovery disk and installed those. It all seemed fine. This morning I turned it on and it the hard drive error message (3F0) please install an operating system. I shut it down and restarted, it seemed normal. I installed a few programs, shut it down again. Returned to it later, started it up again and it took me to the diagnostic screen telling me SMART Check - Not Installed and Short DST - Not Installed.. Can someone tell me how to delete that partition and I can format the drive in a usb sata enclosure and start over again.
Please tell me the correct proceedure to get this laptop back up and running to a factory state. I have original Windows7 and Windows8 and Application and Driver disks for both OS'es.. I want to stay with the Windows7 installation.
Thanks for any help with this problem. I have no idea where I went wrong !
This question was solved.
View Solution.

It is not impossible that the new hard drive is bad, have seen it before. It is also possible that the sata controller on motherboard is bad-but I would look at that possibilty last. Can you get an exchange on the new hdd?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Help with new hard drive and data recovery

I have a macbook pro 13" from early 2011...last week the hard drive crashed and after a few hours at the genius bar had to got tekserv to recover my data and get a new hard drive and update to 8GB of Ram. When I got my macbook back I was given an external hard drive that had everything from my old hard drive saved by the users on the old hard drive. I was hoping I could just transfer the user over to the new hard drive but since I had to restart the computer as a new computer I am not able to just reassign my old profile as the new one on this laptop. Maybe I've done something wrong but at this point I transferred all my documents over, moved my music and pictures over but I have a few things I can't figure out that I'm hoping someone can help with.
1. Do emails that were in my mail program from both gmail and my verizon.net program get saved somewhere or do I have to just assume those were lost?
2. my iTunes library is now there but none of my playlists are there. Should those have been saved somewhere in my iTunes folder that I should see them? I'm concerned about syncing my iPhone or iPads to iTunes without those there.
thanks for the help.

Here's the spec page on your PB. http://www.everymac.com/systems/apple/powerbook_g4/stats/powerbook_g4_1.25_15.ht ml It came with OS 10.2.7 installed. The max OS is Leopard 10.5.x
Tiger install DVDs are in short supply. Tiger is no longer available at the Apple Store but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753). For other sources, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4). Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See http://discussions.apple.com/thread.jspa?threadID=1976068 Can I use another Mac's system restore disc on my Mac?.
Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
http://www.apple.com/support/tiger/install/
You can also download the Tiger Installation and Setup Guide
http://manuals.info.apple.com/en/Tiger_Install_Setup_Guide.pdf
 Cheers, Tom

Need help with Backup Recovery using Rman - Point in Time.

Hi all,
I am trying to recover my database to a certain point in time. Here are the details below.
Oracle database version is. 11G R1. on 2 Node RAC. OS is AIX.
Database name is Sales.
Due to a mistake by the Application team, the database is written over by bad data. Now I have to restore the database in to a point in time, where the database was good.
For this, i took a whole (full) RMAN backup, everything, all the archivelog files and Controlfiles as well.
After doing this, i dropped the entire database. So now everything is clean.
Now i have to restore and recover the database to this point in time.. 03/16/2011 12:45:00
Please guide.
The backups are located at.. /backup/sales/rman/
I am trying various things, but each time i get the msg..
ORA-01507: database not mounted
I understand.. the reason for this message is the controlfile does not exist.. as the database is in mount mode. But as i said.. i have dropped the database in order to proceed with entire restoration.
But i have taken a whole backup.. which also includes the controlfiles + archivefiles.
Please guide.. with proper steps and commands.

Hi,
Priror to start with restore and recovery - Try to restore the control file from backups "/backup/sales/rman/"
Then further you can mount the db and further carry on with recovery (catalog the backups prior to recovery)
- Pavan Kumar N

Help needed with recovery m

Hi all?I have a zen microphoto, it was having problems and went into recovery mode. When i plug it into my computer it is reconised. But when i try to reload the firmware, i'm gegging a message?that my zen is not connected. Does anyone have any ideas. ThanksLins

Hi
Forget the HDD recovery now
You have recovered the system using another disk and this has deleted the HDD recovery image files. So this option is NOT possible!
You are right the L300 and all other notebooks are not delivered with Recovery disks.
The recovery disk has to be created using the preinstalled software called Recovery Disk Creator. But this is also NOT possible because you removed the preinstalled system and the files which are needed for such recovery disk are not available anymore!
But if everything work properly except of the WLan FN + F8 key, then I would recommend to install only the Wlan driver. I think the key does not work because the right WLan driver is not installed.
I think the Satellite L300-149 supports the Wlan Realtek RTL8187B chip.
So install the right Wlan driver which you can find here:
http://aps.toshiba-tro.de/wlan/?page=downloads

Having problem with Recovery Disk assistant. Help

Hi apple community.
I am having trouble with Recovery Disk Assistant.
I want to re-install my mountain lion to restore all settings to default without deleting my personal data (e.g. Movies, documents, pictures, downloads, dowloaded programs like Photoshop cs6 and other downloaded apps)
I want to make a bootable usb for mountain lion.
so i am using the Recovery Disk Assistant.
And when i open the Recovery disk assistant, i was expecting that the OS that will go onto the usb was Mountain lion. But i get OS X Lion instead.
Of course i dont want to downgrade my mountain lion to its previos version of OS X which is Lion.
How should i do this? Thanks.

RDA simply copies your Recovery partition to the flash drive. If you're sure you have a Lion Recovery system, but you're running ML, then you need to download the ML installer from the App Store and run it.

Please help with my incessant spinning wheel of death!

I have almost always had the spinning circle of death… Almost the whole life of this late 2011 15" 4 GB mbp. I just can not easily use this computer anymore. It takes so long to do anything. I need to exit all apps but the one I am using to make it work. I have to restart is almost daily to make it do much. So frustrating! Please help!
I already tried a disk repair under disk utlility with no issues shown.
I read on another post to run an etrecheck app and to post that info. Here is what it says.
EtreCheck version: 2.1.8 (121)
Report generated March 3, 2015 at 11:54:29 AM CST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (15-inch, Late 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,2
    1 2.2 GHz Intel Core i7 CPU: 4-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 395
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
    AMD Radeon HD 6750M - VRAM: 512 MB
System Software: ℹ️
    OS X 10.10.1 (14B25) - Time since boot: 0:14:27
Disk Information: ℹ️
    Hitachi HTS545050B9A302 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 498.88 GB (201.30 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 499.25 GB Online
    MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/MacKeeper/AntiVirus.app
    [not loaded]    net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) [Click for support]
    [loaded]    net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.FTDI.driver.FTDIUSBSerialDriver (2.2.14) [Click for support]
    [not loaded]    com.bodymedia.codelessAB185.kext (1) [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.mackeeper.MacKeeper.plugin.AntiTheft.daemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [running]    com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [running]    com.mackeeper.MacKeeper.Helper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    HP Product Research    UNKNOWN (missing value)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    Flip4Mac WMV Plugin: Version: 2.4.2.4 [Click for support]
    NP_2020Player_WEB: Version: 5.0.9.0 - SDK 10.6 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    CouponPrinter-FireFox_v2: Version: 1.1.10 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: Java 7 Update 45 Check version
User internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 6.2 [Click for support]
Safari Extensions: ℹ️
    Pin It Button
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 498.88 GB Disk used: 297.57 GB
    Destinations:
        Data [Network]
        Total size: 3.00 TB
        Total number of backups: 20
        Oldest backup: 2014-11-12 12:23:49 +0000
        Last backup: 2015-03-03 17:22:41 +0000
        Size of backup disk: Excellent
            Backup size 3.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
         7%    WindowServer
         0%    fontd
         0%    Memory Clean
         0%    AppleSpell
         0%    notifyd
Top Processes by Memory: ℹ️
    279 MB    AntiVirus
    146 MB    Safari
    146 MB    MacKeeper Helper
    90 MB    WindowServer
    73 MB    ocspd
Virtual Memory Information: ℹ️
    410 MB    Free RAM
    2.07 GB    Active RAM
    606 MB    Inactive RAM
    1.12 GB    Wired RAM
    2.19 GB    Page-ins
    725 KB    Page-outs
Diagnostics Information: ℹ️
    Mar 3, 2015, 11:38:29 AM    Self test - passed
    Mar 3, 2015, 10:33:54 AM    /Library/Logs/DiagnosticReports/softwareupdated_2015-03-03-103354_[redacted].cp u_resource.diag [Click for details]

I just saw a post on MacKeeper causing serious issues... Is that something that could be attributing to my problems??

Help with recovery on ipod4

Similar Messages

Maybe you are looking for