Help with reinstalling Flash CS3

Hello,
I need to reinstall Flash CS3 only which is part of Create Suite Master Collection I own. I am not sure how to install just one of the applications. I have only located Flash encoder dmg on the disks. Please advise. Thank-you.

Use the full installer and select only Flash when you see the list of applications to install.

Similar Messages

Help with adobe flash cs3?

I don't know where else to put this topic, so I'm putting it here. I'm using Adobe Flash CS3, and I want to rotoscope a movie I made in FCE. I imported it (numerous times now, each taking about 20 minutes), but I can't figure out how to add it so it is in seperate keyframes so I can actually start rotoscoping. Does anyone know anything about this? Any help is appreciated- I've spent about two hours too many trying to figure it out. I might just be stupid... but...
iMac Mac OS X (10.4.9)

I don't know where else to put this topic, so I'm putting it here. <
You want the Flash forums that are at Adobe.com and creativecow.net and elsewhere.
<div class="jive-quote">I'm using Adobe Flash CS3, and I want to rotoscope a movie I made in FCE. < </div>
But why have you chosen Flash to do the roto? Why not After Effects or even Photoshop?
I imported it (numerous times now, each taking about 20 minutes), but I can't figure out how to add it so it is in seperate keyframes so I can actually start rotoscoping. < </div>
Separate "keyframes?" Do you mean individual FRAMES? You must export out of your editor as an image sequence. Easy. See the online help system or the manuals.
I might just be stupid... but...< </div>
You're not stupid, you just are in a bit over your head. Incomplete research. Roto is a huge niche industry, heavily supported with lots of tutorials but...
Rotoscoping is difficult under the best conditions, you want to find some tutorials from Flash support sites before tackling this.
? < </div>
Please do not bump your own posts. It's rude, especially since this is not a direct Final Cut issue and there is no immediate crisis involved. You just haven't figured out how or where to look for assistance.
I converted it to a quicktime file, though.< </div>
Yes, but you used the wrong export type.
bogiesan

Reinstall Flash CS3 for Mac OSX

Recently had to replace the hard drive on my Mac Book Pro. Data transfer to the new hard drive went well EXCEPT for my attempts to reinstall Flash CS3 and Flash Player (I'm forgetting the name of the latest and greatest version of the media player--forgive my temporary ignorance). I followed all of the procedures outlined in the ReadMe file. Have tried it several times to no avail. I keep getting an error message at the end of the reinstall process and the program will not open. All of the application files appear to be on my hard rive. Something is missing or needs to be repaired. I just don't know where to start to find out what needs to be repaired or replaced or updated. I suspect that because there have been numerous updates to Flash player, something related is interfering with the reinstall process. Any advice help would be appreciated.
Cheers.

Mike, thank you very much for your help. Luckily I have found the
right Flash version: 10.1.102.64
Am 05.02.2014 um 20:55 schrieb Mike M:
Re: flash player for MAC OSX 10.5.8
created by Mike M in Installing Flash Player - View the full
discussion
Flash Player 10.3.183.90
>
That's a zip file containing BOTH Windows and Mac versions.
You'll find a debug folder and a 10.3.183.90 folder. It's in the
latter. It'll be a DMG named 10_3_183_90.dmg.
>
Is your Mac Intel or PowerPC?
Please note that the Adobe Forums do not accept email attachments.
If you want to embed a screen image in your message please visit the
thread in the forum to embed the image at http://forums.adobe.com/message/6089591#6089591
Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply,
either reply to this email or visit the message page: [http://forums.adobe.com/message/6089591#6089591
To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/6089591#6089591
]. In the Actions box on the right, click the Stop Email
Notifications link.
Start a new discussion in Installing Flash Player at Adobe Community
For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/thread/416458?tstart=0

Help with a flash html inserting into DW

Hello,
I have created a enquiry section in flash for one of my html DW pages for my site. When I publish the flash doc ti creates a html page (Contact.html). When I open the flash html page in DW or upload it to my server, everything works fine. I recieve an email at my prefered destination etc etc. But as its only a section of my contact page of my website i need to insert it into my site page (get_in_touch.html) soon as i try and take all the stuff from contact.html and insert it into a div in my get_in_touch.html it doesn't respond when the submit button is pressed..... Can someone please help!!!!!
Dan

Thanks for all your help. I've managed to sort out the problem, still not
sure what it was.... My sites live now.
Just one question for you if you dont mind.
The page which has the flash on it (yes this one again!) Well if someone
goes to the page with out having flash player installed on their machine,
i'm looking for some script to detect that there computer doesn't have
Flash and redirect them to another html page I've created.
Would really appreciated any advice you may have.
many thanks,
Dan
                                                                                pziecina
             <[email protected]>
To
             09/09/2009 16:40                Daniel Herrington
                                             <[email protected]
                                             m>
                Please respond to                                       cc
             clearspace-571537347-50
             [email protected]                               Subject
                  ums.adobe.com              Help with a
                                             flash html inserting into DW
                                                                                Hi
Somewhere above your tag, you will have a line similar to this - Also in your tag the swf file -
These are the files that I said may be wrong or missing.
However if you just edit the flash generated page and include the items you
require in this, and maintain the same file position, you should have no
problems,
PZ

Help with connection flash builder 4.5 to remote php database

help with connection flash builder 4.5 to remote php database

Fatal error: require_once() [function.require]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path='.;C:\php5\pear;D:/webserver/apache2/htdocs/ZendFramework/library') in D:\webserver\apache2\htdocs\giga\first-debug\gateway.php on line 27

Which fonts are installed with Adobe Flash CS3? Which fonts are installed with Illustrator CS3?

Which fonts are installed with Adobe Flash CS3? Which fonts are installed with Illustrator CS3?

Does this mean that if for example I purchase and install Adobe Flash CS3 it will install all the fonts listed under CS3 in this list: http://blogs.adobe.com/typblography/fonts-installed-by-adobes-creative-suite#CS3 ??
Thanks

Can i make Animations with Adobe Flash CS3 Professionals?

can i make Animations with Adobe Flash CS3 Professionals? my
goal is to make a Animation Serie But i got no Expereience!
Is it any place i can learn how to use Adobe Flash CS3
Professionals? Can i get a tutorial/training thing on
www.adobe.com?

Ha!
Just scratch the surface by using the search functions on
this site or google - thousands of
websites that showcase flash animations since version 3 back
in the late 90's - many websites have
dedicated themselves to flash training and tutorials over the
years.
Basically, anything on the web that looks animated, right
click over it and 9 times out of ten it
will say "Flash".
Chris Georgenes
Adobe Community Expert
mudbubble.com
keyframer.com
http://tinyurl.com/2urlka
Arfusman wrote:
> can i make Animations with Adobe Flash CS3
Professionals? my goal is to make a
> Animation Serie But i got no Expereience!
> Is it any place i can learn how to use Adobe Flash CS3
Professionals? Can i
> get a tutorial/training thing on www.adobe.com?
>

Help with Dreamweaver flash image viewer

Hi all
Would like some help with Dreamweavers Flash image viewer.
Everything is working properly except when i try to link a picture, and have set the imagelinkTarget value to _blank the link always navigates away from my site and does not open in a new window.
I have tried all the values for the imageLinkTarget and nothing works..
Here is my code
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0, 28,0','width','190','height','190','src','images/ad1','quality','high','flashvar s','flashlet={imageLinkTarget:\'_blank\',captionFont:\'Verdana\',titleFont:\'Verdana\',sh owCo ntrols:false,frameShow:false,slideDelay:5,captionSize:14,captionColor:#000000,ti tleSize:10,transitionsType:\'Fade\',titleColor:#333333,slideAutoPlay:true,imageU RLs:[\'images/image1.jpg\',\'images/image2.jpg\',\'images/image3.jpg\',\'images/ image4.jpg\'],slideLoop:true,frameThickness:2,imageLinks:[\'http://www.bowlsaustralia.com.au\',\'http://www.smh.com.au\'],frameColor:#333333,bgColor:# FF9966,imageCaptions:[\'Bowls Australia\',\'Sydney Morning Herald\']}','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash','flash_component','ImageViewer.swc','movie','images/ad1' ); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0, 28,0" width="190" height="190">
          <param name="flash_component" value="ImageViewer.swc" />
          <param name="movie" value="images/ad1.swf" />
          <param name="quality" value="high" />
          <param name="FlashVars" value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verd ana',showControls:false,frameShow:false,slideDelay:5,captionSize:14,captionColor :#000000,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:tr ue,imageURLs:['images/image1.jpg','images/image2.jpg','images/image3.jpg','image s/image4.jpg'],slideLoop:true,frameThickness:2,imageLinks:['http://www.bowlsaustralia.com.au','http://www.smh.com.au'],frameColor:#333333,bgColor:#FF9 966,imageCaptions:['Bowls Australia','Sydney Morning Herald']}" />
          <embed src="images/ad1.swf" quality="high" flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:' Verdana',showControls:false,frameShow:false,slideDelay:5,captionSize:14,captionC olor:#000000,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPla y:true,imageURLs:['images/image1.jpg','images/image2.jpg','images/image3.jpg','i mages/image4.jpg'],slideLoop:true,frameThickness:2,imageLinks:['http://www.bowlsaustralia.com.au','http://www.smh.com.au'],frameColor:#333333,bgColor:#FF9 966,imageCaptions:['Bowls Australia','Sydney Morning Herald']}" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash" type="application/x-shockwave-flash" width="190" height="190"> </embed>
        </object>
</noscript>
any help would be greatly appericated
Ken

I just googled and found lots of folks with the same problem. One fellow wrote this as a soluton:
"All you have to do is
remove the values from the imageLinks in the flash element. That
should fix it."
Does it?
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Help with first flash game?

Hi. My name's Rory.
I am an artist.
http://www.youtube.com/profile?user=PimpOfPixels
http://roaring23.cgsociety.org/gallery/
I am learning action script and Flash so that I can make
games.
I am not a complete novice in programming. I am proficient in
Java and in MaxScript (3DSMAX embedded language).
I have been making some progress in action script and I have
a functional (although incomplete) game in the works. You can view
it here:
http://secure2.streamhoster.com/~rlu...orniverous.swf
The idea is it's a color game
red beats green, green beats, blue beats red. Think paper
scissor rock.
The idea is to change the entire circle into one color.
The graphics are place holders BTW.
I am using FlexBuilder 2.0 and Flash CS3, and I have come
across a problem not covered in either of my books.
I'd really appreciate any help that you guys can offer.
I have gotten this far on my own.
My #1 question (and I have many more) is:
How do you through Flash specify animation segments for a
MovieClip Symbol?
Notice how the red creatures occasionally open their mouths.
I want to have a walk, an attack, an absorb, and a bounce animation
on the same timeline and trigger the appropriate one depending on
which color the creature collides with. I do not know how to go
about this problem. I’ve just been trying to get the walk
animation to loop without playing the attack animation so far.
I've tried frame-labeling in flash, with scripts on the key
frames of a second layer that specify when to stop or repeat the
animation... No dice.
I have a symbol named RedShot in the library of a flash
project named "graphics"
In my timeline I have 2 animation segments, and I have a
second layer denoting two corresponding frames named "walk" and
"attack" from the properties menu.
On the final frames of the animations I have scripts.
Code:
gotoAndPlay("walk");
and
Code:
gotoAndPlay("attack");
respectively.
Im my library I have linkage options specified as such:
Class:RedShot
BaseClass:flash.display.MovieClip
export of actionscript#CHECKED
export on 1st frame#CHECKED
on the main stage of my flash project I have actionscript for
2 functions:
Code:
function walk(){
red_shot.gotoAndPlay("walk");
function attack(){
red_shot.gotoAndPlay("attack");
I export the project and the opened window has the "walk"
animation looping properly.
In my FlexBuilder project I embed the symbol
Code:
//Inside class global variables:
[Embed(source="../graphics.swf", symbol="RedShot")]
public var RedShot:Class;
private var _shot:MovieClip;
Code:
//and in my buildShot function:
_shot = new RedShot();
addChild(_shot);
When I build the project the characters appear, and they
animate. The only trouble is that there are no breaks in the
animation. The animation loops right through the frames where I
have specified that the animation should "gotoAndPlay" from a
different part.
What's weirder is that I can call
Code:
"gotoAndPlay("attack");"
without an error and it will go to and play from that point.
The only trouble is that it will begin to loop the entire animation
again without stopping at the gotoAndPlay events stored in the
frames of the timeline.
It seems like all embedded actions are ignored, add I can't
think of another way to controll the animation.
Any thoughts?

After hours of searching the internet I finally got this
blasted question figured out.
How to you export a symbol from Flash for use in a Flex
Builder project without destroying actionscript stored within the
frames of the Symbol's timeline?
That's a long winded way of saying: "In FlexBuilder, how do
you control MovieClips from Flash". I'm trying to make games, and
this was a particularly important question for me :).
Here's how:
1) You need a hotfix from Adobe.
[HTML]http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401493&sliceId=2[/HTML]
This allows Flash CS3 to export a SWC file.
2)You have to set the linkage properties for your various
symbols in the flash library panel.
a)right click on symbol in library panel
b)choose "linkage"
c)"Class:" = (pick a name)
d)"Base class:" = flash.display.MovieClip;
e)"Export for ActionScript" = CHECKED
f)"Export in first frame"=CEHCKED
3)If you want to have multiple segmented animations as I
certainly did you'll want to create frames and actionscripts within
the symbols timeline to define where these animations are.
a) in the symbol's timeline make a second layer. We'll name
that layer "labels" for the sake of not having this get too
confusing.
b) on that layer create a new frame for each of the animation
segments that you'd like to define and stretch them to the length
of the corresponding animations.(I'm assuming that you have a
keyframe animation on the 1st layer... otherwise what's the point
of all this :P?)
c)in the properties panel name the frames in the "labels"
layer accordingly ie. "walk" "run" shoot" etc.
d)Define whether the various animations play once or loop by
adding a script to the last frame of the animation. If you want the
animation to loop add
[CODE]gotoAndPlay("name-of-the-animation");[/CODE]
if you want the animation to play once and stop add
[CODE]stop();[/CODE]
if you want the animation to play once and then return to a
different animation add
[CODE]gotoAndPlay("name-of-a-different-animation");[/CODE]
4) now you can export the symbols to an SWC file. Note: you
do not get this option unless you have installed the hotfix.
[HTML]http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401493&sliceId=2[/HTML] .
a)rightclick on a symbol in the library panel
b)choose "exportSWCfile..."
c)export the file to a logical place such as the root of your
FlexBuilder project.
5) Now you have to tell flexbuilder about the new SWC file.
Note: Once this file is added to the FlexBuilder library you can
instantiate classes from it as though they were included using the
"include" function.
a)Right clicking on the root of the project in the Navigator
view.
b)going to properties.
c)Going to library path. (2nd tab)
d)and pressing the "Add SWC" button
Now you're done and you can instantiate any of the symbols
from your library while preserving any actions from your symbols
timeline just as though you had imported it as a class from a
typical library.
Sweet huh?
Thanks to the countless people and internet resources I found
on the subject. Hopefully it will be easier for anyone who finds
this post.
Here's an adobe video which covers the basic process.
https://admin.adobe.acrobat.com/_a300965365/p75214263/

Help!! Flash CS3 and CS4 "Test Movie" very slow on OS X

This is a problem that, having read many forums, affects a
very large amount of people, though Adobe doesn't care at all. It
only affects OS X users. I know that it has been addressed many
times in different forums, but I never actually stumbled across
anyone having found a solution.
When I use Flash CS3, and I make any animation, even the
simplest tween, and I preview it with Test Movie, the result I get
is an extremely slow playback. Something like half the FPS it
should be.
However, when I export the SWF and preview it in the external
Flash Player or in a browser, it's just fine and fast.
Another interesting thing is that in CS3, when I open the
Help panel, the problem with Test Movie only happens like 20% of
the time. In that case, it only gets solved if I restart or Log Out
at least. I have no idea why the Help panel being open solves the
problem, this only shows that this is probably a little graphic
user interface bug, or something similar, that could be solved very
very easily.
In Flash CS4, there is no Help panel, so there is no solution
to the problem.
It would be nice to be able to press Cmd + Enter to see the
movie, and not have to do File > Export > bla bla bla, open
Finder, Find the SWF, double click it, wait for the browser to
open... etc...
I have a brand new 2.5 GHz MacBook Pro, and Test Movie runs
faster on my 900MHz Pentium III PC!! Funny...
Here are some links I found about this problem:
http://bugs.adobe.com/jira/browse/FP-878
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb407896
http://www.kirupa.com/forum/archive/index.php/t-258991.html
This is quite ridiculous, and on Adobe's Support page, the
solution is "Do not use Test Movie."
And the funny thing is that they didn't even bother to fix
this in CS4...
So basically if something doesn't work, Adobe's solution is
"Don't use it."
I guess they're right!
Please, tell me if anyone has or does not have this problem
or knows anything about it!
Thanks,
Mate

This is a problem that, having read many forums, affects a
very large amount of people, though Adobe doesn't care at all. It
only affects OS X users. I know that it has been addressed many
times in different forums, but I never actually stumbled across
anyone having found a solution.
When I use Flash CS3, and I make any animation, even the
simplest tween, and I preview it with Test Movie, the result I get
is an extremely slow playback. Something like half the FPS it
should be.
However, when I export the SWF and preview it in the external
Flash Player or in a browser, it's just fine and fast.
Another interesting thing is that in CS3, when I open the
Help panel, the problem with Test Movie only happens like 20% of
the time. In that case, it only gets solved if I restart or Log Out
at least. I have no idea why the Help panel being open solves the
problem, this only shows that this is probably a little graphic
user interface bug, or something similar, that could be solved very
very easily.
In Flash CS4, there is no Help panel, so there is no solution
to the problem.
It would be nice to be able to press Cmd + Enter to see the
movie, and not have to do File > Export > bla bla bla, open
Finder, Find the SWF, double click it, wait for the browser to
open... etc...
I have a brand new 2.5 GHz MacBook Pro, and Test Movie runs
faster on my 900MHz Pentium III PC!! Funny...
Here are some links I found about this problem:
http://bugs.adobe.com/jira/browse/FP-878
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb407896
http://www.kirupa.com/forum/archive/index.php/t-258991.html
This is quite ridiculous, and on Adobe's Support page, the
solution is "Do not use Test Movie."
And the funny thing is that they didn't even bother to fix
this in CS4...
So basically if something doesn't work, Adobe's solution is
"Don't use it."
I guess they're right!
Please, tell me if anyone has or does not have this problem
or knows anything about it!
Thanks,
Mate

Help with Adobe photoshop cs3....

Hello. i need help with something. i'm trying to switch the mode so that both of my files will show up at the same time in cs3. i understand there is a command for it, but i don't know what it is. can someone please help me with this issue? help would be greatly appriciated. thank you very much for your time.

There is an option for 'window'. the problem is, i dont know where Wndows, arrange, or tile is located at! as of now, the program only allows one picture to show on the screen. i want two pictures, but i dont know the command for it. i've heard of it, but i forgot it! oh and thank you very much for replying to me!

HELP WITH ADOBE FLASH PLAYER!!

The problem started when my mother wanted a coupon for pet food and I had to download smtn to get the coupon....BAD IDEA! So while I was trying to get that download off my tool bar my Google changed to yahoo , when I opened up Firefox. It took me about, two hours, yes two hours!!! to change it back to Google when I open Firefox. That is when I got the message that adobe Flash player 15.0 r0 has stopped working. now that someone helped me reinstall adobe flash player,because someone told me to uninstall and reinstall...BAD IDEA! and I looked on my tool bar at the ad on's and it says it is activated, but it still tells me it has stopped working and to stop plug in because a problem cant be found. I have to do that or just make the warning smaller or it will keep coming up!!
THANK YOU!
MAYBE YOU HAVE A SUGGESTION FOR THIS?

I dont understand a word you said...please answer if you have a idea to help please!!!

Can anyone help with my flash player???

i need help with this there isnt any sound coming from my
flash player and this confuses me becxause the video plays and it
only happend to the flash player not my windows media player or
anything
does anyone know anything about this???

yah this is really confuing me since its only the flash
players and my windows player works i mean i have all of the
downloads and stuff so idk what to do its happened several times
and went back to normal within a few hours or days but this time
its been a few weeks and its kinda gettin anoying

Help with Installing flash error- metafile cannot be loaded

I read the forum on this but it ended last year and there was no response to some recent questions on this and the direct email to the Adobe rep. on there got no response.
I am having this problem with installing Flash- it gets about 30% of the way and then a message comes up that says the metafile cannot be loaded.
I am running 10.7.5 on Mac, all browser software is current. I use both Safari and Chrome. After it said Flash was out of date I tried to update but got the metafile error. So I uninstalled Flash to install it fresh but the same error came up. I tried everything recommended from the forum. I also did all the steps from the help list direct from Adobe ( deleting Flash files, folders, rebooting, etc.) The offline link Adobe provides says the "file cannot be found" so I can't download that either. So I tried the online link download, but even after doing all the steps in order etc. I still get the error when I try to install it.
I have no firewall and have no virus software running. I also tried the direct offline links that others have provided from 2013, (unfortunately they are old) in both clicking on them and also downloading by right click but they are dead links and even the download for it has no content.
Any help that is more recent than last year? If this is in the wrong place, apologies. New to the forum.

I tried all solutions but one posted in adobe support. I am local administrator but IE security settings are set by group policies and buttons in tools security setting are grayed out.
After three days with "The ActiveX control for Flash Player could not be registered" message I tried registering the activeX control manually.
Bingo! that made the trick.
So open a DOS window, type "regsvr32.exe C:\WINDOWS\system32\Macromed\Flash\Flash10d.ocx" -first check if this directory exists and contains the Flash10d.ocx (no quotes needed) and you should receive a confirmation that it registered correctly.
I must say that I've tried so many ways that I cannot repeat the correct order before this has worked ;-(
Hope it works for you all

Need Help with a Flash Web Project

Hello, everyone. I am trying to use Flash to make a two-step
system. I want the flash document to, first, allow a person to
upload multiple image files and then, second, for the flash
document be able to create a slideshow with the uploaded images and
fade in and out from each image until the slideshow is over. I want
it to be where the flash document creates its own slideshow with
the images that are uploaded in the first step that I mentioned. I
want it to do it completely on its own so I need to know how to
give it the proper AI so that it can do this task.
So, are there any tips that anyone has on how to do this? Can
anyone tell me exactly how to do this? I really need help with this
for my new website project. Thanks in advance, everyone!

The problem with the text not appearing at all has to do with you setting the alpha of the movieclip to 0%. Not within the movieclip, but the movieclip itself. The same for the xray graphic, except you have that as a graphic symbol rather than a movieclip. To have that play while inhabiting one frame you'll need to change it to a movieclip symbol.
To get the text to play after the blinds (just a minor critique, I'd speed up the blinds), you will want to add some code in the frame where you added the stop in the blinds animation. You will also need to assign instance names for the text movieclips in the properties panel, as well as place a stop(); in their first frames (inside).
Let's say you name them upperText and lowerText. Then the code you'd add at the end of the blinds animation (in the stop frame) would be...
_parent.upperText.play();
_parent.lowerText.play();
The "_parent" portion of that is used to target the timeline that is containing the item making the command, basically meaning it's the guy inside the blinds telling the guy outside the blinds to do something.
You'll probably want to add stops to the ends of the text animations as well.
If you want to have the first text trigger the second text, then you'd take that second line above and place it in the last frame of the first text animation instead of the blinds animation.
Note, on occasion, undeterminably, that code above doesn't work for some odd reason... the animation plays to the next frame and stops... so if you run into that, just put a play(); in the second frame to help push it along.
PS GotoandPlay would actually be gotoAndPlay, and for the code above you could substitute play(); with gotoAndPlay(2);

Help with reinstalling Flash CS3

Similar Messages

Maybe you are looking for