Help with repair permission!

After I repair permissions I get the following message:
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
What's the cause of it? How do I fix it?

Locum elevates Finder's privileges, such as when emptying the trash when there are trash files
present that the user does not own.
The SUID (sticky bit) message is a bit misleading. The ISVTX (the sticky bit) has no effect on
executable files. All optimization on whether text images remain resident in memory is handled
by the kernel's virtual memory system. So even if the SUID bit was set, it would not matter.
What the SUID error actually means is this:
The checksum on record in /var/db/receipts, does not match the actual file checksum. The
reason is simple:
The file has been replaced by a newer one, and that is why the old checksum on file is obsolete.
The receipt file did not get updated during the update installation. Such is not uncommon.

Similar Messages

  • Help With Repair Permissions!

    Hi All,
    I have a June 2009 17" 2.8 UMBP. I keep getting regular Spinning Beach Balls, Lock Ups, Delays and a whole host of Trackpad Issues much like many people are experiencing with the 1.7 Firmware Update which only is supposed to affect the 13" & 15" UBMP Models. I read on another post that Apple recommended to "Verify & Repair Disk Permissions" which I done. The problems still remain and the report in "Verfiy Permissions" is exactly the same (it seems) as that of the "Repair Permissions" and where it says "Repair Permissions Complete" at the end. The "Repair Permissions" Report still says that "Permissions Differ" on all lines - how can they have been repaired if they still differ? I am a novice and not technically aware about Macs so I hope someone can help me. Here is a copy of the report:
    2009-07-17 15:10:11 +0100: Verify permissions for “Macintosh HD”
    2009-07-17 15:10:23 +0100: Reading permissions database.
    2009-07-17 15:10:23 +0100: Reading the permissions database can take several minutes.
    2009-07-17 15:13:50 +0100: Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:52 +0100: Permissions differ on "System/Library/Components/AudioCodecs.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:52 +0100: Permissions differ on "System/Library/Components/CoreMediaAuthoringPrivateComponents.component/Conten ts/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:52 +0100: Permissions differ on "System/Library/PrivateFrameworks/CoreMediaAuthoringPrivate.framework/Versions/ A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:52 +0100: Permissions differ on "System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CodeRes ources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:53 +0100: Permissions differ on "System/Library/QuickTime/AppleProResDecoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:53 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:53 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:53 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMediaKeys.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:53 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMime.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:54 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTTransport.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:54 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTPlugIn. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:54 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:54 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/Resources/QTAbout.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:54 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTStreami ng.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:13:54 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTUpdate. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:14:31 +0100:
    2009-07-17 15:14:31 +0100: Permissions verification complete
    2009-07-17 15:14:31 +0100:
    2009-07-17 15:14:31 +0100:
    2009-07-17 15:14:38 +0100: Repairing permissions for “Macintosh HD”
    2009-07-17 15:15:07 +0100: Reading permissions database.
    2009-07-17 15:15:07 +0100: Reading the permissions database can take several minutes.
    2009-07-17 15:18:32 +0100: Permissions differ on "System/Library/Frameworks/CoreVideo.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:33 +0100: Permissions differ on "System/Library/Components/AudioCodecs.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:34 +0100: Permissions differ on "System/Library/Components/CoreMediaAuthoringPrivateComponents.component/Conten ts/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:34 +0100: Permissions differ on "System/Library/PrivateFrameworks/CoreMediaAuthoringPrivate.framework/Versions/ A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:34 +0100: Permissions differ on "System/Library/PrivateFrameworks/CoreMediaPrivate.framework/Versions/A/CodeRes ources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/QuickTime/AppleProResDecoder.component/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMediaKeys.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTMime.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTAdvance d.prefPane/Contents/Resources/QTTransport.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTPlugIn. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTRegiste r.prefPane/Contents/Resources/QTAbout.bundle/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTStreami ng.prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:18:35 +0100: Permissions differ on "System/Library/PreferencePanes/QuickTime.prefPane/Contents/Resources/QTUpdate. prefPane/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
    2009-07-17 15:19:13 +0100:
    2009-07-17 15:19:13 +0100: Permissions repair complete
    2009-07-17 15:19:13 +0100:
    2009-07-17 15:19:13 +0100:
    How do I fix things so things do not differ? I am hoping that will then fix the issues I am experiencing with my UBMP!
    Thank You,
    Suave!

    Hi
    I think you will find that many people are suffering this very same problem with permissions, it is nothing to be too concerned about and will in all probability disappear after a system update sometime in the future.
    There was a similar problem when I had a PowerBook G4 every time you repaired permissions it showed a whole raft of errors which would not go away. Eventually Apple released a system update and they all vanished.
    It is not broken and it is not going to impact on the running of the computer in anyway.
    I have just got a new MBP and have the same permission problem but my trackpad is functioning perfectly and I don't suffer any spinning beach ball.
    I would contact Apple, or go into an Apple Store and seek advice about the trackpad and spinning beach ball as these are probably caused by other problems than permissions being wrong.
    Phil

  • Help with Repairing Permissions G4 iBook 10.5

    My daughter is visiting and I tried to use the Disk Utility to Repair the
    Permissions on her G4 iBook running OS X 10.5. It cranked and cranked but
    never did repair the permission or really fail either.
    It still works but I would feel better if I could get the permissions repaired.
    Also, the screen really seems dim compared to the new 13-inch MacBook Pro.
    Is there a fix to crank up the brightness on a G4 iBook?

    Ah, yes! The leopard disc utility. What a crock of poop that is. You can let it run overnight and it probably still won't finish. It only takes 90 seconds in Tiger. The best thing to do is to install Onyx and let it take care of the disc maintenance.
    After you install Onyx run 'Automation'. It will repair permissions, clear caches and run the cron scripts in one command. Also, it will only take 15 minutes or so to complete a full string of maintenance tasks. Give up on the disc utility in Leopard.
    Onyx - http://www.titanium.free.fr/pgs/english/apps.html

  • Help with repair order

    I sent my nano in for repair a few days ago and I would like to check on the status of the repair. I went to the "check status of repair" section on the website and it prompted me for a case # and some other #. I checked my email and Apple never sent these numbers to me, nor did the service tech give them to me over the phone. All I have is the shipping label from the box Apple sent me. What can I do?
    Thx!

    If you completed an online repair request, then you would have received an email with the information
    also, your repair request should be listed in your online account
    the information should also be on the shipping label for the box you received
    if not, call AppleCare and give them your name and they can look it up
    you have various options....

  • Problems with repairing permission

    What does this mean?
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    I haven't modified this file.

    Safe to ignore...mostly everyone sees the same.
    Apple has this to say about that:
    http://support.apple.com/kb/TS1448

  • Help With repairing an in warranty x220? Damaged X220

    Today my basically new x220 dropped from maybe 2 feet and the case ( where the heat grill is) broke a bit. The edge of the screen is split and the entire back and hinge where the monitor meets the keyboard is dented ( it looks as if the heat sink may be bent up. what are the steps I need to follow to get this fixed? I have ~270 days of warranty left.  There is a "compucom" service center near me, but what is the quickest way to get this repaired?

    Your standard warranty won't cover the repair on user induced damages.
    You should call Lenovo warranty to find out the best way to get it fixed.
    But i would imagine it won't be cheap.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Trying to repair permission and I always get this: Permissions differ on "Applications/Safari.app/Contents/Resources/Safari.help/Contents/Resources/inde x.html"; should be lrwxr-xr-x ; they are -rwxr-xr-x .

    Trying to repair permission and I always get this:
    Permissions differ on “Applications/Safari.app/Contents/Resources/Safari.help/Contents/Resources/inde x.html”; should be lrwxr-xr-x ; they are -rwxr-xr-x .
    I even fresh install the system and every time I do repair the permission I always end up with this even though it said repaired.
    I figure this is the problem my laptop, sometime it wont save files or documents and it goes in limbo and had to force shutdown and have to restart on the
    booth drive to have it permission repair. I just updated to 10.9.3 and will see if this stop the crashing but repair permission notice is still the same.
    Any feedback please....Thanks
    Model Name:          MacBook Pro 13-inch, Mid 2010
      Model Identifier:          MacBookPro7,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          3 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz
      Boot ROM Version:          MBP71.0039.B0E
      SMC Version (system):          1.62f7
      Serial Number (system):          7302895ZATM
      Hardware UUID:          0B62E320-214C-5EE8-9EBC-106E01BE083D
      Sudden Motion Sensor:
      State:          Enabled

    AmanteDesign wrote:
    Trying to repair permission and I always get this:
    Permissions differ on “Applications/Safari.app/Contents/Resources/Safari.help/Contents/Resources/inde
    I see the same thing since the general release of 10.9.3. This did not occur in prior versions.

  • In Imovie 2011-Trying to image capture my project but it comes up after 10 hours- The project could not be prepared for publishing because an error occurred. File already open with write permission. Hopefully someone can help me.

    In Imovie 2011- Trying to image capture my project but it come up after 10 hours of rendering- The project could no be prepared for publishing because an error occured. File already open with write permission. Please Help!

    oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those

  • Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

    Hi 
    Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
    How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
    For Example: if i have 4 users, A, B, C and D. what i want is:
    User A can see everything and act as a project manager or Admin.
    User B can view all projects in project centre but can change the schedule or resource assignment etc.
    User C can only act as approver of projects and can view all projects in project centre.
    User D can only view specific projects for which permissions are given.
    can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
    Thanks in Advance
    Cheers
    AJ
    Ajay Kumar

    Hi Ajay,
    Please refer to this link for detailed explanations about PS2013 security model. 
    http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
    Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
    define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
    level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
    I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
    Concerning your 4 users:
    user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
    user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
    user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
    concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
    and approves resource timesheet.
    user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
    timesheets and/or tasks updates which must be approved.
    Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
    Hope this helps.
    Guillaume Rouyre - MBA, MCP, MCTS

  • Since installing Yosemite and Photos I can now no longer drag and drop a photo in an email, as I have always done. I repaired permission and restarted a number of times. still not working... Help?! Thanks, Michael

    Since installing Yosemite and Photos I can now no longer drag and drop a photo in an email, as I have always done. I repaired permission and restarted a number of times. still not working... Help?! Thanks, Michael

    What happens if you use the Share button and select Mail?
    What happens when you try? I had to hold there photo there for a short period before it would load.

  • Access issues with library permission repairs required

    I have continual issues opening iPhoto. Frequently I am asked to repair permission issues. this in turn takes an hour or more. The issue arises at least every time different users access the program and library. what can i do to resolve this ?

    Do you have you library stored in the Shared folder on your Mac?  If so that's the reason you're getting all of those permissions issues.  Using that folder for multiple users was discontinued by Apple some time ago.
    The only reliable sharing method for an iPhoto Library with multiple users on the same Mac or multiple Macs is to put it on an external HD formatted OS X Extended (journaled) that is connected directly to the Mac.

  • I get an error stating cc cookies dir: cannot make folder / cookies: Permission denied (error 13) when I attempted to download the creative cloud installer on my Mac. Can anyone help with similar pop up window?

    I get an error stating cc cookies dir: cannot make folder / cookies: Permission denied (error 13) when I attempted to download the creative cloud installer on my Mac. Can anyone help with similar pop up window?  I'm trying to get a trial version of CS5. 

    You do not need to involve Creative Cloud to install/try the trial version of CS5...
    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  • Hi! Can someone help me with repair service address for Palm TX?

    Hi! Can someone help me with repair service address for Palm TX?
    This question was solved.
    View Solution.

    Good luck, and please let us know here how it works out for you.  We love knowing of current resources who can help solve people's problems with these older devices.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Repair Permission with Disk Utility in Snow Leopard?

    After upgrading to SL, tried to do a repair permission with disk utility (a few times) & i got this "Warning: SUID file "System/Library/CoreS...as been modified and will not be repaired." ....is this normal????
    http://img25.imageshack.us/i/screenshot20090830atam0.jpg/

    A quick question about Disk Utility with Snow Leopard .. I can't make the Password dialog come up when I open a .sparseimage that is Password protected. I tried to make a new one from scratch and the same result.
    Any suggestions?

  • Help with opening Adobe Reader and downloading updates

    I can not open Adobe .pdf files any longer (this started yesterday, prior to that I could open adobe files).
    When I double click a .pdf file I get this notice on my screen: Windows cannot access the specified device path or file. You may not have the appropriate permission to access file.
    So I went to the Adobe download site to download a new copy of Adobe.  When I start the download I get this on the screen:  The instruction at "0x0e3a0068" referenced memory at "0x0e3a0068."  The memory could not be written.  Then two options are listed: click OK to terminate or cancel to debug.  So I click on cancel and I get this on my screen: Internet Explorer has closed this webpage to help protect your computer.   A malfunctioning or malicious addon has caused I.E. to close this webpage.
    I don't have AVG running, I do have avast but I've disabled it.  I ran Registry Mechanic and an I.E. erasure program but nothing helps.
    I have gone into I.E. and reduced the security level to its lowest state but no joy.
    So, any ideas or suggestions on what's the problem and how to overcome it would be appreciated.  Thanks, in advance, for your reply.  Jim R.

    Hi Mike..tried that as well but no joy.  A friend of mine was looking at it all and noticed that it was an I.E. thing as far as not letting me redownload the reader so I went to Mozilla Firefox and I could download a new version but....whenever I attempt to open a .pdf file I get that message, "Windows can not open the specified device, path or file. You man not have the appropriate permissions to access the item." 
    Damn...this is irritating as I need to get to some of thos files as I need them for a Journal I'm working on as editor-in-chief. 
    It all worked just fine last Saturday but starting Monday when I was on my flight out to D.C.  no joy. 
    Sigh...Jim R.
    Jim R.
    Date: Tue, 1 Dec 2009 14:50:27 -0700
    From: [email protected]
    To: [email protected]
    Subject: Help with opening Adobe Reader and downloading updates
    Under the help menu, there is an option to repair the installation of reader. Did you try that?
    >

Maybe you are looking for