Help With Resetting the SMC
I have (over time) had several unusual things happen to my 1 year-old MBP. In reading the Apple article for resetting the SMC after trying the other steps suggested with no change in the problems, I am wanting to reset the SMC. However, the options are confusing to me. The 2 options about the battery, I can say it does not have the battery that used to be in my older MBP that just pops out. The second option for resetting the SMC says "resetting…with a battery you should NOT remove…" Since this option seems to be the closest one to my machne, I want to make sure because in the owners manual it goes over how to remove the battery and does not say you should not remove the battery on your own. However, is this the link I would follow for resetting the SMC? My machine does not fit the 3rd link. I want to make sure I do the right thing.
Just in case you need to know, my battery icon does not display properly when the MBP is plugged into the MagSafe and when I initially plug it into the adapter, it says, "not charging." It also will be hooked up to the MagSafe with the amber light on but the % charged will not change for a long time unless I unplug it, restart the machine and plug it back up. Not sure if this is related but the past week I have had Safari Quit unexpectedly about 5 times per day. I get the report form and send that in, but I have never had this issue before. I have been watching a lot of online TV programs from NBC online and CBS online, but I am not sure if this is related and will be helped by the reset.
I did a check on my machine's serial number (at http://www.appleserialnumberinfo.com), and I just noticed that there was supposed to be a hard drive firmware update and an EFI Firmware update, but I do not know enough about computers to go through with these.
Thanks for any help regarding what link to follow for resetting the SMC and what to do if that does not help at least the charging and saying, "not charging" when the MagSafe is hooked up to the MBP. I should add that the outlet is working fine.
(I should say that this is definitely a built-in battery. I think I made that clear from the first post. What I was not sure of is if it was what the SMC Link said; "…you should not remove it on your own, but it looks like all the built-in batteries should not be removed "on your own.")
The Apple Store gave me this MBP because they could not fix my one before this current model. I checked out the serial number and it shows on appleserialnumber.com when I put in the serial number that it is a (I think it said 2.06 processor) or something close to this. Since this was basically a freebie and the Apple Store manager said they would upgrade the MBP to what I had at the time I upgraded the earlier model that basically died. So, what that means, the earlier MPB they "replaced" I had upgraded the speed of the HD, so they did that on this new machine, I upgraded to the highest processor at the time, so they upgraded this new one to 3.06, but that website says I have a 2.06 or 2.08 GHz or something close to this. OK, I tried to explain what Apple did to the machine I have. Just in case it matters, I have found a few things that lead me to believe that this was a return under some unusual circumstance, but I can't prove it.
With that all said, I remember I went online and in the manual I got (both places) for this MBP it explains how to remove the battery: carefully put the screws near the notebook where they go back, and on and on. It never says that the owner should not remove the battery.
I should say, after I explained I did not have the MBP that I can easily remove the battery like the previous MBP I had, but the guy who initially explained how to reset the SMC switch ignored that I guess and gave me the instructions for the MBP I for sure do not have. The 3rd option I knew I did not have, so that only left one option but I thought it was odd because it explains how to remove the battery with dotted lines where to put the screws so you put them back in the proper place.
I did not understand why appleserialnumber.com gave me this info. (and I think Apple did too when I put in my serial number when I first received the machine, which did not make sense). Both places said but in slightly different words: Model: - MacBook Pro (15-inch, Mid 2009) (CTO) and Build Year: - Your Mac was built in 2010. Does this make sense to you?
In the Sys. Profiler: Model Name: MacBook Pro
Model Identifier: MacBookPro5,3
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Maybe it was just a general picture for removing the bottom case. I looked for the owners manual and I looked in the box that my MBP before the current one came in. No owner's manual but I found 2 things still in their wrapper. A remote and some kind of adaptor. Kind of cool. I wonder if the remote works for on my current MBP? what is the pin adaptor for? it is really short, like 6".
Message was edited by: KoolerKT
Similar Messages
-
Help with resetting the Offline Payment Password (OP Password)
I sent the email to [email protected] referenced in KB: http://kb.worldsecuresystems.com/939/cpsid_93902.html though I have not received a text message to the phone number supplied.
Our site is nosillaorganics.com, we are a client of BigTurns.....Can someon help us get this moving please?
Recap of the issue we're facing:
We use offline credit card processing and cannot retrieve the PDF Secure Passphrase so in effect cannot process any orders....it's kind of a problem. :-)
When we try to access the PDF Secure Passphrase we receive the message: "Your Offline Payment Password (OP Password) is overdue. For security reasons, you must change it every 90 days. To access this area, you must login using your OP Password."
We have the choice to Cancel or Continue...when we hit continue.....we go to the OP login screen and it asks us to enter the old OPP though it doesn't actually work because we always get the following error upon submit:
"Your offline payment session has been temporarily restricted due to too many failed login attempts. Your account will automatically unlock shortly; there is no need to contact customer support." however it has been over 5 days and the account is still locked!
JonHi Sanjit,
thanks for your reply....see thread below between Charles from BigTurns and Adobe Support...it looks like the ticket # is 26088.
thanks in advance....weeks have passed and we still can't access information for our online retail orders! Please help.
thanks,
Jon
---------- Forwarded message ----------
From: Adobe Business Support
Date: Fri, May 10, 2013 at 5:26 PM
Subject: [Adobe Business Support] Re: Offline Payment Processing
To: Charles Brodeur <[email protected]>
##- Please type your reply above this line -##
Your request (# 26088) has been updated. Reply to this email or go to our Help & Support page.
Sachin Hasija (Adobe Business Support)
May 11 03:26 (EEST)
Hello Charles,
Thank you for contacting us.
In order to reset the OPP you would need to follow the steps mentioned in the article :http://kb.worldsecuresystems.com/939/cpsid_93902.html
You would need to send the documents to the e-mail address mentioned and then the password is sent to you via text message.
Hope this helps.
Thanks & Regards, -
I’ve got a new MacBookair11 2weeks ago and I am very happy with it. Today I’ve tried to synchronize it via icloud with my ipad and I have lost the camera.
Looking through help in internet I found out that I had to reset the SMC. I did exactly as per instructions given but with no luck.
Is there any other solutions that will fix my camera for facetime and iphoto?
Thanks for your helpMacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update:
"Apple is investigating this issue." -
My 27" Imac (A1312/EMC2390) keeps shutting down unexpectedly with no warning or "screen of death". So far I reset the SMC, and zapped the PRAM. I even replaced the power supply but the problem continues. My error and system logs seem unhelpful too. Can anyone help me out?
You can get a shutdown like that if the computer gets too hot. Make sure the air intakes on the bottom and the exhaust vent on the top are clean and are not blocked by something in your workspace like papers or the back of the computer being too close to part of the furniture. You need a good six inches (15cm) of clearance between the exhaust slot and other objects or surfaces.
Anti-virus/internet security software, especially the "pay for" kinds, can increase operating temps. So can third-party backup software furnished with many "name-brand" external hard drives.
Fan motors and/or temperature sensors can fail. If you have the original grey disks that shipped with your iMac, find the on that has Apple Hardware Test (AHT) and run it. If you have a failed heat sensor or fan motor, it will detect it with an error code containing "SNS" if it's a bad sensor or "MOT" if its a bad fan motor.
AHT instructions here:
http://support.apple.com/kb/HT1509
Also see if your iMac 27 falls under theis Apple Repair Extension Program:
iMac 1TB Seagate Hard Drive Replacement Program -
My older iMac running Mavericks 10.9.4 shuts down when it connects to the internet. Resetting the SMC doesn't help. What can I do?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I am getting the error message "No AirPort card installed" Restarting my iMac desktop does not solve this (Apple help says I need to reset the SMC this way, but nothing changes). Can somebody advise, please?
Thanks for the flag J.K. - they contaced me and solved my problem. On this account (which I created just to ask this question), I log in with my email rather than my user name (mtalldud). On the account that I was having trouble with, they told me to use my user ID instead of my email to log in and it worked. This is a bit confusing and seems a bit inconsistent but at least I don't need this temporary account any more to get into this community and find answers!
-
I have a MacBook Pro and the batter icon has an "X" in it. I attempted resetting the SMC but it's still there. Not sure if the SMC didn't work or I have another problem. Help?
You can try the SMC again.
http://support.apple.com/kb/HT3964
Follow directions for a battery you should not remove yourself
You can also try a NVRAM/PRAM reset (at the bottom of the same page in the above link
Also hold the OPTION key and click on the Apple logo in the menu bar and click on system information, in the left column select power. Under the battery info see if it is charging (with the power adapter plugged in) as well as the health info (condition should be normal), and battery installrd (should be YES)
If other than these are different you may want to take it in to a Genius bar for a full diagnosis they will do that for dree.
Hope this helps -
After resetting the SMC the keyboard is inoperative. On the start screen appears a traslucent square with a horizontal bar in white, and a row of empty dots below (the same format as for example the brightness symbol). I cannot turn the Mac off with the power button, only with the trackpad, clicking on the turn off symbol on the screen.
When I try to login with my username, no characters appear as I type.
I can login as a guest, but from there I can do nothing, because the keyboard is still inop and if I wanted to, for example, have the software updated, I need to type an admin login, which is impossible.
Thanks for your helpWhat happens if you close the lid? Sleep?
In your place I would use sleep state to reset PRAM, as it can resolve your graphical mess.
Your keyboard likely was not powered after SMC/PRAM failure, so you will need to open MBP cover without opening the lid and disconnect battery power cable with insulated tools from logic board, wait for 5-10 minutes, then try to reset PRAM while keeping cover -
I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?
When I tried using a recently downloaded (from the App store) version of MtLion 10.8.2 (12C60) I could NOT get the new MacMini to install or boot from a USB I had previously made. I was however able to use the Recovery Mode of the MacMini to create a bootable SSD which I had installed. The problem arose when I went back into Recovery DU as it saw the seperate drives (SSD & HD) as a broken Fusion Drive. Interestingly DU from the boot volume had NO issues and reported NO faults. It was the Recovery DU that identified the faulty Fusion Drive configuration. At this point I am definately out of my depth but my speculation is that the Recovery Volume is being used in some fashion to form the method or pattern that DU assigns files to the drives, System Report sees the drives as seperate volumes with all their individual characteristics.
Disk Utility did not make a bootable USB, I don't have or use CCC or Super Duper.
Here is the longer version I've been compiling:
Having bought a late 2012 Mac Mini(6,2) i7 2.66GHZ with the standard 1TB 5400 HD and 4GB of RAM (base model) I immediately decided to install a Mercury Elite 6g 240GB SSD and up the RAM to 16GB. I received both shipments on the same day and had all my new toys in front of me. After following the video advice on OWC’s website for the installation of the second drive I started the mini and formatted the SSD to accept the OS from Recovery on the original HD. This MacMini shipped with 10.8.2 (12C2034) as the OS, the normal build of 10.8.2 is (12C60). Having used Recovery Disk Utility to format the SSD it came back with an error that DU could’t Repair. I went ahead and installed the OS on the SSD and the Mini booted normally from both drives. The issue I encountered with this setup was that iMovie encountered an “unexpected error” and would not save a completed project. I therefore decided to figure the drive issue out because I suspect the new Fusion File Management software didn’t like my configuration with drives that Recovery DU saw as needing to be “fixed”. After spending some time on the phone with both OWC and Apple Support I took the plunge and used Internet Recovery Disk Utility and allowed both drives to be “fixed” after which DU created a Fusion Drive (Logical Drive) that I then ran Repair Disk on and it showed up as a single drive in DU. It works perfectly as described by Apple’s site:
http://support.apple.com/kb/HT5446
Having checked the Link Speed and Negotiated Speed they both show as 6g so I’m pleased not to have lost performance due to it being fuzed to a 3g 5400 drive. The biggest drawback is that Apple’s Fusion Management only allows for 1 additional partition and I would have preferred more than that.
I have sourced some additional information here:
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.fosketts.net/2011/08/05/undocumented-corestorage-commands/
If anyone has a factory Fusion Drive could you please post the Link and Negotiated Speeds of both drives? This information can be found in Apple > About This Mac > More Info… > System Report > Serial ATA and the drives should show up as discrete drives with their info listed separately. -
My Mcbook cant find the host. I get some conection because my Utorrent has some donwload activity, but when I attempt to open any page i just get a time out and ERR_NAME_NOT_RESOLVED. If i reset the SMC by removing the battery, google loads perfectly and it gives me search results without any problem. But when I click on any link, or attempt to enter a direct URL it gives me the error mentioned before.
I restarted the modem, changed the DNS, deactivate the firewall, conect the macbook via ethernet, change the IP, and nothing seems to work. This issue happened the first time i tried to conect to internet in a different country. Internet works fine in any other laptop or mobile device.
When using the assistant to run a diagnosis on the network, i get the first 4 items (wifi, wifi adjustments, network adjustments and internet provider) with a green light, and the other two (internet and server) with yelow lights (sometmes red light).
When i tried to connect the first time, i had a OS X 6.8 but i upgraded it to Maverick 10.9, since i had already donwnloaded it, and the result was the same.
anyone could help me please?We usually advice first to Reload web page(s) and bypass the cache in case of such problem and then do a check for extensions to see if any are causing the problem.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Other possible causes can be zooming a page or having increased the minimum font size.
*http://kb.mozillazine.org/Websites_look_wrong -
My iMac has been continuously running its internal fan. Sometimes with just the internet running, or upon startup. I put it into sleep mode and wake it back up, which turns the fan off, but sometimes it starts back up shortly after. I have tried resetting the SMC by powering off and unplugging. Anything else that could be causing this?
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
-
IMac fan keeps running despite resetting the SMC
My iMac fan keeps running loudly even when the computer isn't doing any thing, and I just started it up.
I have tried resetting the SMC and that didn't help.
I also recently had to insert a new hard drive instead of the old one that failed. I am thinking that either the SSD is just hotter than the old hard drive, or that the hard drive sensor is somehow inverted in the plug. Is there any way of testing the hard drive sensor to see if that is faulty, or to test the fan. When I look at the Activity Monitor the system is 87% idle...Although you don't mention which imac you have since 2009 Apple has used hard drives with the temp sensor built in. When replacing one of these late model drives you have to use the same type hard drive or you get fans running all the time because the temp sensor isn't detected. You might want to try some third party software such as iStat Menus, SMC Fan Control or HDD a Fan Control. Google them for reviews.
-
My MacBook Pro will not charge, even after resetting the SMC.
My MBP will not charge. It's only a little less than 2 years old. I've reset the SMC and even an employee at the genius bar has, it still isn't charging. When I plug in the cord, my battery remains at 13% with a plug icon inside the battery. When I click on the battery, it says "Battery Not Charging" in gray.
This is my battery information:
Battery Information:
Model Information:
Serial Number: 9G1300072D3MA
Manufacturer: DP
Device Name: bq20z451
Pack Lot Code: 0
PCB Lot Code: 0
Firmware Version: 201
Hardware Revision: 2
Cell Revision: 158
Charge Information:
Charge Remaining (mAh): 685
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 5448
Health Information:
Cycle Count: 336
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 11099
Please help!!When I plug in the cord, my battery remains at 13% with a plug icon inside the battery.
Try Troubleshooting MagSafe adapters
And try a different electrical outlet. -
What are the symptoms or indicators that determine the necessity of resetting the SMC and PRAM?
Hi,
Can anyone have list of symptoms that may help a user to determine if there is a need to reset the SMC and PRAM.
I would appreciate if the high-end user of this site come up with their experiences in making a compiled list, possibly product wise, if any such attempt is not taken yet.
In case it is done already, please provide me with the active link/s.
Please see below if you need to know about the MB i am using.
Model Name: MacBook
Model Identifier: MacBook2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MB21.00A5.B07
SMC Version: 1.13f3
System Software Overview:
System Version: Mac OS X 10.4.11 (8S2167)
Kernel Version: Darwin 8.11.1
Look forward to it. ThanksHi,
The system profiler shows as follows-
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 1
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Battery Information:
Battery Installed: Yes
First low level warning: No
Full Charge Capacity (mAh): 2750
Remaining Capacity (mAh): 2701
Amperage (mA): 0
Voltage (mV): 12454
Cycle Count: 507
AC Charger Information:
Connected: Yes
Charging: No
Hardware Configuration:
UPS Installed: No
Regarding the start up sound, i opened the L Bracket but Ram was seated properly. I just checked the ram's position but didn't remove it. However, i found the right most screw of the L-bracket was loosen, i don't know how.
Do you think i should remove the ram and reinsert it? If so, do i have to reset the PRAM after that?
The system profiler shows the ram is ok-
BANK 0/DIMM0:
Size: 512 MB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
BANK 1/DIMM1:
Size: 512 MB
Type: DDR2 SDRAM
Speed: 667 MHz
Status: OK
What do you think about the whole situation?
Look forward to your reply.
All the best and have a goo day Mate. -
Cannot reset the SMc on my iMac
SO my iMac has been acting ****** for the past few months and ive asked a question and people tried to help but none of them were actually helpful..so the problem is my late 2010 core i3 running 10.6.8 imac cant read ANY USB devices (BUT WORKS PERFECTLY FROM THE WINDOWS PARTITION) except for my ipod and my iphone! those devices seem to charge and trasfer files perfectly..also it takes ages to restart or wake up from sleep..this all points to the SMC problems..so ive been trying to reset the SMC and youve guessed it it DOESNT RESET! Every armchair technician on the internet from the next web to apple support forums have written extensive articles on how and why i should rest the SMC..but they ALL have different instructions! one say i have to remove the power cord from the wall and hold the power button for 5 seconds one says i have to remove the cable from my imac and hold it for 15 seconds! none of them work ive tried every possible way with perfect timing! and IT DOES NOT REST THE SMC!!
Ive looked for videos on the web and nobody seems to have uploaded any videos for reseting the SMC on their IMAC BUT TEHY HAVE LITERALLY HUNDREDS OF VIDEOS FOR MACBOOKS!!
Im sorry if i sound like an *******,its because ive been trying to fix this unsolvabale problem for the past few months without any results!! OH AND MY BACKWARDS COUNTRY DOESNT HAVE ANY MAC TECHNICIANS!! i had to buy this from an unauthorized seller and paid twice the original price!!
FYI i already did the PRAM/NVRAM reset atleat a 100 times...I am trying to connect from outside of my network. From within the wireless network (PC#2, eMac, iMac) and from within the local lan network (PC#1, AirPort) I have no problem connecting to the website on the iMac. But connecting from outside my Network using the puplic IP I doesn't work.
I now have taken the AirPort and all the computers exept the iMac off line. Only the imac is connected via lan cable to my lan outlet in the wall. Using my new local IP address (172.16.126.246) I can of course still access the website on the imac but using the public IP address (222.228.213.117) which remained the same doesn't work.
Maybe you are looking for
-
Dunning phases and blockades not visible for archived invoices in FPL9
Hi experts, I am not able to see the dunning phases and blockades for archived invoices when i am opening FPL9 with archive. My requirement is that it should be visible and donot so any error message. Can you please provide me with the solution ? Tha
-
SQL Server Agent and Jobs and executing @EventData
I have a SQL Server Agent Job and within it a Job Step which states "Execute Report Subscriptions" and a command which has... exec msdb.dbo.sp_start_job '6FF53AED-855F-43AB-9FB7-064062B8012E' --9:07 subscription GO WAITFOR DELAY '00:08'; Now, I find
-
Insert into table error - ora-01722 invalid number
Need some assistance with inserting data into a table. The date column keeps on failing to insert. here is my insert statement insert into tab_mod_history (TABLE_OWNER, TABLE_NAME, PARTITION_NAME, SUBPARTITION_NAME, INSERTS, UPDATES, DELETES, TIMESTA
-
Re: Global Variables (what! More?!?)
[email protected] writes: One problem with using service objects for global variables is the flat namespace they expose.I thought that was the definition of a global variable. I could find no sanctioned way to provide a NameSpace that was global only
-
Wirelessly streaming to Apple TV
Hi all, first time on this forum so I'll make this question brief! I want to steam content to my Apple TV, obviously this can be handled by my MacBook using iTunes however this seems like a clumsy way of achieving this task as it required my Macbook