Help with returning query from loadURL()
I finally came across loadURL() and figured out that I can
use it to invoke my ColdFusion components without page
reloading--very handy!
Now, I need to figure out how to do this to return values
from my components. Has anyone done this and have an example I
could see, or at least point out to me a suggestion of code for
successfully doing this?
Right now, my component looks like this:
<cfcomponent output="no">
<cffunction name="getComments" access="remote"
output="no" returntype="query">
<cfset var rsComments = "">
<cfquery name="rsComments" datasource="xmlTest">
SELECT *
FROM comments
ORDER BY commenter DESC
</cfquery>
<cfreturn rsComments>
</cffunction>
</cfcomponent>
I am trying to use loadURL() as follows:
function myQuery() {
var myDatasetURL = 'xmlTest.cfc?method=getComments';
var req = Spry.Utils.loadURL("GET", myDatasetURL, true);
In Firebug, the "Response" shows a serialized WDDX packet.
I've not really messed with these before, so any help would be
greatly appreciated!
Thanks
Joel
Your first mistake was to choose an array. An array has a fixed length, so it's not appropriate for storing a sequence whose length you don't know in advance. You should choose a List instead; an ArrayList would be a reasonable implementation to choose.
Then you just add the Point to the ArrayList. Here's how you declare it:
List<Point> points = new ArrayList<Point>();and here's how you use it in the listener:
points.add(evt.getPoint());Returning anything from the listener to its caller, which is something buried in the GUI hierarchy, would be... um... pointless.
Similar Messages
-
Need help with SQL Query with Inline View + Group by
Hello Gurus,
I would really appreciate your time and effort regarding this query. I have the following data set.
Reference_No---Check_Number---Check_Date--------Description-------------------------------Invoice_Number----------Invoice_Type---Paid_Amount-----Vendor_Number
1234567----------11223-------------- 7/5/2008----------paid for cleaning----------------------44345563------------------I-----------------*20.00*-------------19
1234567----------11223--------------7/5/2008-----------Adjustment for bad quality---------44345563------------------A-----------------10.00------------19
7654321----------11223--------------7/5/2008-----------Adjustment from last billing cycle-----23543556-------------------A--------------------50.00--------------19
4653456----------11223--------------7/5/2008-----------paid for cleaning------------------------35654765--------------------I---------------------30.00-------------19
Please Ignore '----', added it for clarity
I am trying to write a query to aggregate paid_amount based on Reference_No, Check_Number, Payment_Date, Invoice_Number, Invoice_Type, Vendor_Number and display description with Invoice_type 'I' when there are multiple records with the same Reference_No, Check_Number, Payment_Date, Invoice_Number, Invoice_Type, Vendor_Number. When there are no multiple records I want to display the respective Description.
The query should return the following data set
Reference_No---Check_Number---Check_Date--------Description-------------------------------Invoice_Number----------Invoice_Type---Paid_Amount-----Vendor_Number
1234567----------11223-------------- 7/5/2008----------paid for cleaning----------------------44345563------------------I-----------------*10.00*------------19
7654321----------11223--------------7/5/2008-----------Adjustment from last billing cycle-----23543556-------------------A--------------------50.00--------------19
4653456----------11223--------------7/5/2008-----------paid for cleaning------------------------35654765-------------------I---------------------30.00--------------19
The following is my query. I am kind of lost.
select B.Description, A.sequence_id,A.check_date, A.check_number, A.invoice_number, A.amount, A.vendor_number
from (
select sequence_id,check_date, check_number, invoice_number, sum(paid_amount) amount, vendor_number
from INVOICE
group by sequence_id,check_date, check_number, invoice_number, vendor_number
) A, INVOICE B
where A.sequence_id = B.sequence_id
Thanks,
NickIt looks like it is a duplicate thread - correct me if i'm wrong in this case ->
Need help with SQL Query with Inline View + Group by
Regards.
Satyaki De. -
Help with Retrieve attributes from database
Hi,
I'm using filter "Retrieve from or write to database" with select query from database by selecting attributes as column names radio button.
I'm unable to get these user attributes with column names.
For eg : select tag from test_tag where rownum=1;
I was trying so that result can be used using tag attribute (${tag}).
Please help in this regard.
Thanks,
VaniHi Vani,
After the retrieve filter, add a Trace Filter and leave it as it is. Execute the policy once and in the trace data that now will be displayed there you should be able to read out the exact name and type of the parameter. This way of identifying data/parameters etc is a recommended way of working while developing! Copy paste the Trace Data from the Trace filter here if you need help!
Cheers,
Stefan -
Need urgent help with the query - Beginer
Hello - I need help with a query to populate data in a table.Here is the scenario.
Source1
MnthID BranchCod CustID SegCode FXStatus ProfStatus Profit
200712 B1 C1 20 Y Y 100
Source2
MnthID BranchCod CustID ProdCode ProdIndex
200712 B1 C1 12 1
200712 B1 C2 12 0
Destination
MnthID BranchCod SegCode ProdCode CountSegCust CountProdCust ProfitProdCust
Condition and Calculations:
1)Source1 customer are base customers.If Source2 has customers who is not in source1 then that customer's record should not be fetched.
2)SegCode, FX Status, ProfStatus is one variable in destination table. [ SegCode = SegCode+ FXStatus (if FXStatus = Y)+ ProfStatus (if FXStatus = Y) ]
3)CountSegCust = CountCustID Groupby MnthID,BranchCod,SegCode Only.
4)CountProdCust = CountCustID Groupby MnthID,BranchCod,SegCode,ProdCode (when ProdIndex = 1)
5)ProfitProdCust = Sum of Profit of Customers Groupby MnthID,BranchCod,SegCode,ProdCode (when ProdIndex = 1)
Apologies for bad formatting.
Thanks in advance!!A total guess indeed.
It's not clear whether some aggregation can be done (summing counts of grouped data might cause some customers being counted more than once)
insert into destination
select mnthid,branchcod,segcode,prodcode,countsegcust,countprodcust,profitprodcust
from (select s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end segcode,
s2.prodcode,
count(s1.custid) over (partition by s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
order by null
) countsegcust,
count(case proindex when 1
then custid
end
) over (partition by s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
s2.prodcode
order by null
) countprodcust,
sum(case proindex when 1
then profit
end
) over (partition by s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
s2.prodcode
order by null
) profitprodcust,
row_number() over (partition by s1.mnthid,
s1.branchcod,
s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
s2.prodcode
order by null
) the_row
from source1 s1,source2 s2
where s1.mnthid = s2.mnthid
and s1.branchcod = s2.branchcod
and s1.custid = s2.custid
where the_row = 1Regards
Etbin -
Please, need help with a query
Hi !
Please need help with this query:
Needs to show (in cases of more than 1 loan offer) the latest create_date one time.
Meaning, In cases the USER_ID, LOAN_ID, CREATE_DATE are the same need to show only the latest, Thanks!!!
select distinct a.id,
create_date,
a.loanid,
a.rate,
a.pays,
a.gracetime,
a.emailtosend,
d.first_name,
d.last_name,
a.user_id
from CLAL_LOANCALC_DET a,
loan_Calculator b,
bv_user_profile c,
bv_mr_user_profile d
where b.loanid = a.loanid
and c.NET_USER_NO = a.resp_id
and d.user_id = c.user_id
and a.is_partner is null
and a.create_date between
TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
order by a.create_dateTake a look on the syntax :
max(...) keep (dense_rank last order by ...)
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/functions056.htm#i1000901
Nicolas. -
Please need help with this query
Hi !
Please need help with this query:
Needs to show (in cases of more than 1 loan offer) the latest create_date one time.
Meaning, In cases the USER_ID, LOAN_ID, CREATE_DATE are the same need to show only the latest, Thanks!!!
select distinct a.id,
create_date,
a.loanid,
a.rate,
a.pays,
a.gracetime,
a.emailtosend,
d.first_name,
d.last_name,
a.user_id
from CLAL_LOANCALC_DET a,
loan_Calculator b,
bv_user_profile c,
bv_mr_user_profile d
where b.loanid = a.loanid
and c.NET_USER_NO = a.resp_id
and d.user_id = c.user_id
and a.is_partner is null
and a.create_date between
TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
order by a.create_datePerhaps something like this...
select id, create_date, loanid, rate, pays, gracetime, emailtosend, first_name, last_name, user_id
from (
select distinct a.id,
create_date,
a.loanid,
a.rate,
a.pays,
a.gracetime,
a.emailtosend,
d.first_name,
d.last_name,
a.user_id,
max(create_date) over (partition by a.user_id, a.loadid) as max_create_date
from CLAL_LOANCALC_DET a,
loan_Calculator b,
bv_user_profile c,
bv_mr_user_profile d
where b.loanid = a.loanid
and c.NET_USER_NO = a.resp_id
and d.user_id = c.user_id
and a.is_partner is null
and a.create_date between
TO_DATE('6/3/2008 01:00:00', 'DD/MM/YY HH24:MI:SS') and
TO_DATE('27/3/2008 23:59:00', 'DD/MM/YY HH24:MI:SS')
where create_date = max_create_date
order by create_date -
Hi,
I have column which is having values like
EMEA/MEA/IT
EMEA/WE/GE
EMEA/MEA/SA
EMEA/WE/jk
but i need to get all these rows based on some front selected values where we will select like EMEA/MEA & EMEA/WE.But that value will be ';' separated like EMEA/MEA%;EMEA/WE%.Based on this value l need to retrieve all the rows based on this value (Note ';' as the delimiter) .I tried with INSTR , but not able to sort out.
Could some one please me on this one how to make this condition in my query.
Thanks,Thanks Frank for your response.
Table will have thousands of rows where column which I comparing(OU_DIV_REG) will be like with many combination's.I am attaching some data for reference.
EMEA/DIV/
EMEA/DIV/HYP
EMEA/EE
EMEA/EE&CIS
EMEA/EE&CIS/
EMEA/EE&CIS/CENT
EMEA/EE&CIS/CIS
EMEA/EE&CIS/GR
EMEA/EE&CIS/RO
EMEA/EE&CIS/RTG
EMEA/EE&CIS/SBL
EMEA/EE&CIS/SEES
EMEA/EE&CIS/TR
EMEA/EMEA_OTM/
EMEA/FMEA/FR
EMEA/FMEA/MEA
EMEA/IL
EMEA/MEA
EMEA/MEA/
EMEA/MEA/EG
EMEA/MEA/SA
EMEA/MEA/ZA
EMEA/NE/BLX
EMEA/SE
EMEA/SE/ALPS
EMEA/SE/IBE
EMEA/UK
EMEA/UK/
But I am using this condition in APEX.Actually I have a report with return query and that will execute. I need this condition to be in where clause.I am attaching my APEX report query for your reference. I updating that where clause condition in BOLD letters where i need to add this condition that will consider all the rows from the table wherever input from APEX page will be like fallowing with ';' as delimter.
EMEA/MEA%;EMEA/EE&CIS%
Considering this input values, I need to consider all the rows above where that column value us having EMEA/MEA% and EMEA/EE&CIS%.
I tried adding the where clause which in BOLD letter (cluster condition).Please let me know will it work or also I need to how to add these XMLtable separation based on ',' in where clause.
For you reference I am just my full report query(which is not needed i know - but just have the full understanding).
DECLARE
lc_query VARCHAR2(4000);
BEGIN
lc_query := 'SELECT INITCAP(SUBSTR(end_cli_name,1,20)) Customer
,DECODE(cps_id,NULL,INITCAP(SUBSTR(title,1,20)),''<a href="http://cpotsi.oraclecorp.com/pls/cpotsiweb/CPOTSI.EP_WITHDRDTA_RAG_L.show_cps?p_cps_id=''||cps_id||''&p_uptodate=''||:P_DD||''" target=_blank>''||INITCAP(SUBSTR(title,1,20))||''</a>'') Project
,ou_ctry_code
,funding_amnt
,budgeted_margin_amnt
,TO_NUMBER(eac_margin_amnt)
,decode(substr(PREV_CPS_RAGU_L_1,1,1),
''R'',''<img src="#APP_IMAGES#red.jpg" alt="Red">'',
''A'',''<img src="#APP_IMAGES#amber.jpg" alt="Amber">'',
''G'',''<img src="#APP_IMAGES#green.jpg" alt="Green">'',
''U'',''<img src="#APP_IMAGES#unknown.jpg" alt="Unknown">'',
''<img src="#APP_IMAGES#unknown.jpg" alt="Unknown">'') RAGU
FROM emea_pmr_disco_input WHERE
month=:P_SELECTED_MONTH
AND year=:P_SELECTED_YEAR
AND region IN (SELECT region_code
FROM emea_pmr_regions
START WITH ( INSTR('':''||:P_SELECTED_REGION||'':'','':''||region_code||'':'',1,1) > 0 )
CONNECT BY PRIOR region_code=parent_region_code)
AND prof_com_text LIKE :P_SELECTED_INDUSTRY ';
IF :P_SELECTED_CLUSTER <> '%' THEN
lc_query := lc_query ||
*' AND upper(ou_div_reg) LIKE ''*
SUBSTR(:P_SELECTED_CLUSTER,1,INSTR(:P_SELECTED_CLUSTER,'';'',1,1)-1 )'' OR
upper(ou_div_reg) LIKE ''
SUBSTR(:P_SELECTED_CLUSTER,INSTR(:P_SELECTED_CLUSTER,'';'',1,1)+1,(INSTR(:P_SELECTED_CLUSTER,'';'',1,2) - (INSTR(:P_SELECTED_CLUSTER,'';'',1,1)-1) ) ) ''
OR upper(ou_div_reg) LIKE ''
SUBSTR(:P_SELECTED_CLUSTER,INSTR(:P_SELECTED_CLUSTER,'';'',1,2)+1,(INSTR(:P_SELECTED_CLUSTER,'';'',1,3) - (INSTR(:P_SELECTED_CLUSTER,'';'',1,2)-1) ) ) ''
OR upper(ou_div_reg) LIKE ''
SUBSTR(:P_SELECTED_CLUSTER,INSTR(:P_SELECTED_CLUSTER,'';'',1,3)+1,(INSTR(:P_SELECTED_CLUSTER,'';'',1,4) - (INSTR(:P_SELECTED_CLUSTER,'';'',1,3)-1) ) ) ''
OR upper(ou_div_reg) LIKE ''
SUBSTR(:P_SELECTED_CLUSTER,INSTR(:P_SELECTED_CLUSTER,'';'',1,4)+1,(INSTR(:P_SELECTED_CLUSTER,'';'',1,5) - (INSTR(:P_SELECTED_CLUSTER,'';'',1,4)-1) ) ) ''
OR upper(ou_div_reg) LIKE ''
SUBSTR(:P_SELECTED_CLUSTER,INSTR(:P_SELECTED_CLUSTER,'';'',1,5)+1,(INSTR(:P_SELECTED_CLUSTER,'';'',1,6) - (INSTR(:P_SELECTED_CLUSTER,'';'',1,5)-1) ) ) ''
OR upper(ou_div_reg) LIKE ''
SUBSTR(:P_SELECTED_CLUSTER,INSTR(:P_SELECTED_CLUSTER,'';'',1,6)+1,(INSTR(:P_SELECTED_CLUSTER,'';'',1,7) - (INSTR(:P_SELECTED_CLUSTER,'';'',1,6)-1) ) ) ''
END IF;
IF :P1_TIER2 <> '%' THEN
lc_query := lc_query || ' AND INSTR('';''||upper(:p1_tier2)||'';'','';''||upper(T2)||'';'',1,1) > 0 ';
END IF;
IF :P1_TIER3 <> '%' THEN
lc_query := lc_query || ' AND INSTR('';''||upper(:p1_tier3)||'';'','';''||upper(T3)||'';'',1,1) > 0 ';
END IF;
IF :P1_TIER4 <> '%' THEN
lc_query := lc_query || ' AND INSTR('';''||upper(:p1_tier4)||'';'','';''||upper(T4)||'';'',1,1) > 0 ';
END IF;
IF :P_SELECTED_COUNTRY <> '%' THEN
lc_query := lc_query || ' AND INSTR('';''||upper(:P_SELECTED_COUNTRY)||'';'','';''||upper(ou_ctry_code)||'';'',1,1) > 0 ';
ELSE
IF :P_IS_ADMIN = 'N' THEN
lc_query := lc_query || 'AND ou_ctry_code IN (SELECT country_code
FROM emea_pmr_user_countries
WHERE INSTR('':''||:P_SELECTED_REGION||'':'','':''||region_code||'':'',1,1) > 0
AND user_id = :P_SELECTED_USER_ID
AND view_access = ''Y'') ';
END IF;
END IF;
IF :P_TOPMARLOV='Current' THEN
lc_query := lc_query || ' AND UPPER(ep_state_name)=''STARTED''';
ELSIF :P_TOPMARLOV='Closed' THEN
lc_query := lc_query || ' AND UPPER(ep_state_name)=''CLOSED''';
END IF;
IF:P1_MARGIN_STATUS='R' THEN
lc_query := lc_query || ' AND
UPPER(substr(PREV_CPS_RAGU_L_1,1,1))=''R''';
ELSIF:P1_MARGIN_STATUS='G' THEN
lc_query := lc_query || ' AND
UPPER(substr(PREV_CPS_RAGU_L_1,1,1))=''G''';
ELSIF:P1_MARGIN_STATUS='A' THEN
lc_query := lc_query || ' AND
UPPER(substr(PREV_CPS_RAGU_L_1,1,1))=''A''';
ELSIF:P1_MARGIN_STATUS='U' THEN
lc_query := lc_query || ' AND
UPPER(substr(PREV_CPS_RAGU_L_1,1,1))=''U''';
END IF;
htp.p(lc_query);
RETURN lc_query;
END; -
I created a blogging tool for my students to use as I teach
them internet safety and cyber citizenship. I am no CF master, but
I dabble a little bit here and there. I need some help with this
query. It is running extremely slow, which means I have probably
created some horrendous loop in this query. If any one out there
has a better solution for this query, I and my middle school
students would be extremely grateful.
Here's what I would like it to do. I have two tables, one for
the blog messages and another for comments. The comments are linked
to their respective blog messages through a common database field.
When someone clicks on a link to read a student's blog, a query
runs which pulls all of the blog messages for that user, the
comments, and it also counts the number of comments entries for
each message so that I can place a total # of comments under each
blog message.Not sure why you have this like this: (Select
count(commentid) from comments where comments.blogid = blog.blogid)
or this twice: blog.blogusersid = #fname#
You need to make sure that the comments.blogid and
blog.blogid fields are indexed. Does this query work any faster?
<cfquery Name="Myblog" datasource="blog">
SELECT b.blogid, b.btitle, b.bcontent, b.bdate,
b.blogusersid, b.fname, b.lname, b.blogpict, b.pictlocation,
b.userid, c.commentid, c.blogid, b.lastupdated, COUNT(c.commentid)
AS cc
FROM blog AS b
INNER JOIN comments AS c ON c.blogid = b.blogid
WHERE b.blogusersid = #fname#
GROUP BY b.blogid, b.btitle, b.bcontent, b.bdate,
b.blogusersid, b.fname, b.lname, b.blogpict, b.pictlocation,
b.userid, c.commentid, c.blogid, b.lastupdated
ORDER BY b.bdate
</cfquery>
..... but I'm not sure that you will be getting the comment
count that you want with either query.
Phil -
I need help with SQL query (if it can be accomplished with query at all).
I'm going to create a table with structure similar to:
Article_Name varchar2(30), Author_Name varchar2(30), Position varchar2(2). Position field is basicly position of an article author in the author list, e.g. if there is one author, his/her position is 0, if 2, then 1st author is 0, second is 1, etc.
Article_Name Author_Name Position
Outer Space Smith 0
Outer Space Blake 1
How can I automate creation of Position, based on number of authors on the fly? Let's say I have original table without Position, but I want to create a new table that will have this information.
RegardsIf you have an existing table whose structure doesn't tell you what position the author is in, what's the algorithm you'd use to determine who was the first author, the second author, etc? If you issue a select query on a table without providing an "order by" clause, Oracle makes no guarantees about the order in which it retrieves rows.
As an aside, why would you store position number in a varchar2 field? If it's a number, it ought to be stored as a number.
Justin -
Hi guys can someone help with a query regarding the 'podcast app' why do they not have all the episodes that relate to one show available why only half or a selected amount
THanks...but some days they have all the episodes right back to the very first show...ive downloaded a few but they are only available every now and then which makes no sense...why not have them available the whole time ??
-
Hi,
I need help with the following query. I want the balance (bal) with the latest exchange rate available.
Sample table & data
with
FX_RATE as
select 11 as id_date, 1 as id_curr, 47 as EXCH_rate from dual union
select 12, 1, 48 from dual union
select 13, 2, 54 from dual union
select 14, 2, 55 from dual union
select 15, 3, 56 from dual union
select 15, 2, 49 from dual),
TBL_NM as
select 13 as p_date, 2 as p_curr, 200 as bal from dual union
select 14, 2, 200 from dual union
select 15, 2, 200 from dual union
select 16, 2, 200 from dual union
select 17, 2, 200 from dual union
select 11, 5, 100 from dual
select p_date, p_curr, bal * nvl(exch_rate,1) from TBL_NM T LEFT OUTER JOIN FX_RATE F1 on (id_curr = p_curr and F1.id_date = T.p_Date)In the above query for p_date 16 & 17 and p_curr 2 it returns just balance multiplied by exchange rate 1"default". But i want the balance to have data as per latest exchange rate which is of exchange rate 15.
I tried this but returns error ORA-01799: a column may not be outer joined to a subquery ..
with
FX_RATE as
select 11 as id_date, 1 as id_curr, 47 as EXCH_rate from dual union
select 12, 1, 48 from dual union
select 13, 2, 54 from dual union
select 14, 2, 55 from dual union
select 15, 3, 56 from dual union
select 15, 2, 49 from dual),
TBL_NM as
select 13 as p_date, 2 as p_curr, 200 as bal from dual union
select 14, 2, 200 from dual union
select 15, 2, 200 from dual union
select 16, 2, 200 from dual union
select 17, 2, 200 from dual union
select 11, 5, 100 from dual
select p_date, p_curr, bal * nvl(exch_rate,1) from TBL_NM T LEFT OUTER JOIN FX_RATE F1
on (id_curr = p_curr and F1.id_date = (select max(F2.id_date) from FX_RATE F2 where F2.id_curr = T.p_curr and F2.id_Date <= T.p_date))Please advice on how i can achieve this ..The entire query wud be like this .. I've to incorporate in here
CREATE MATERIALIZED VIEW MV_DUMMY
BUILD IMMEDIATE
REFRESH FORCE ON DEMAND
AS
SELECT T.ID_TSACTION_RELEASED
BAL.ID_CONTRACT_BALANCE AS ID_CONTRACT_BALANCE,
T.N_REFERENCE_NUMBER
T.INSTRUMENT_N_REFERENCE
T.ITEM_NUMBER
T.EXTERNAL_SYSTEM_ID
T.SEQUENCE_NUMBER
T.ID_RELEASED_DATE
ROUND(BAL.LC_AVAILABLE_BALANCE * NVL(FX1.EXCHANGE_RATE,1) / NVL(FX2.EXCHANGE_RATE,1) , 4)
BAL.LIABILITY_BALANCE
BAL.LIABILITY_BALANCE * NVL(FX3.EXCHANGE_RATE,1)
BAL.LIABILITY_CHANGE_USD
BAL.MEMO_LIABILITY_BALANCE
BAL.MEMO_LIABILITY_BALANCE * NVL(FX3.EXCHANGE_RATE,1)
BAL.MEMO_LIABILITY_CHANGE_USD
BAL.ORIGINAL_FACE_AMOUNT
decode(T.TENOR_CODE,'Time','T','Sight','S','Split Sight Time','SST','Split Multiple Time','SMT',T.TENOR_CODE)
CASE
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ILC','IB','AIR','STG','NLC','NP')
THEN T.ID_LIABILITY_CIF
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ELC','EB','XLC','XP','EC','LN','SCF-AR')
THEN T.Id_Beneficiary
WHEN GTSPROD.PRODUCT_CATEGORY IN ('TLC','IC','OA','SCF-AP')
THEN T.ID_Applicant
END PRIMARY_CUSTOMER_ID,
CASE
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ILC','IB','AIR','STG','NLC','NP')
THEN plbcif.EXTERNAL_SYSTEM_ID
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ELC','EB','XLC','XP','EC','LN','SCF-AR')
THEN PBCIF.EXTERNAL_SYSTEM_ID
WHEN GTSPROD.PRODUCT_CATEGORY IN ('TLC','IC','OA','SCF-AP')
THEN pappcif.EXTERNAL_SYSTEM_ID
END PRIMARY_CUSTOMER_EXT_SYS_ID,
CASE
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ILC','IB','AIR','STG','NLC','NP')
THEN plbcif.CIF_NAME
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ELC','EB','XLC','XP','EC','LN','SCF-AR')
THEN PBCIF.CIF_NAME
WHEN GTSPROD.PRODUCT_CATEGORY IN ('TLC','IC','OA','SCF-AP')
THEN pappcif.CIF_NAME
END PRIMARY_CUSTOMER_NAME,
CASE
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ILC','IB','AIR','STG','NLC','NP')
THEN plbbac.BAC
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ELC','EB','XLC','XP','EC','LN','SCF-AR')
THEN pbbac.BAC
WHEN GTSPROD.PRODUCT_CATEGORY IN ('TLC','IC','OA','SCF-AP')
THEN pappbac.BAC
END PRIMARY_CUST_BAC_CODE,
CASE
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ILC','IB','AIR','STG','NLC','NP')
THEN nvl(plbmg.MARKET,'NOT APPLICABLE')
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ELC','EB','XLC','XP','EC','LN','SCF-AR')
THEN nvl(pbmg.MARKET,'NOT APPLICABLE')
WHEN GTSPROD.PRODUCT_CATEGORY IN ('TLC','IC','OA','SCF-AP')
THEN nvl(pappmg.MARKET,'NOT APPLICABLE')
END PRIMARY_CUST_MARKET,
CASE
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ILC','IB','AIR','STG','NLC','NP')
THEN nvl(plbmg.SUB_MARKET,'NOT APPLICABLE')
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ELC','EB','XLC','XP','EC','LN','SCF-AR')
THEN nvl(pbmg.SUB_MARKET,'NOT APPLICABLE')
WHEN GTSPROD.PRODUCT_CATEGORY IN ('TLC','IC','OA','SCF-AP')
THEN nvl(pappmg.SUB_MARKET,'NOT APPLICABLE')
END PRIMARY_CUST_SUB_MARKET
FROM F_TSACTION_RELEASED T
LEFT OUTER JOIN D_BAC_CODE BAC
ON (T.BAC_CODE_LIABILITY = BAC.BAC_CODE)
LEFT OUTER JOIN REF_BAC_SORT_CODE REF_BAC
ON (T.BAC_CODE_LIABILITY = REF_BAC.BAC)
LEFT OUTER JOIN F_CONTRACT_BALANCE BAL
ON (T.ID_TSACTION_RELEASED = BAL.ID_TSACTION_RELEASED)
LEFT OUTER JOIN D_MARKET_SEGMENT MG
ON (T.ID_MARKET_SEGMENT = MG.ID_MARKET_SEGMENT)
LEFT OUTER JOIN D_DATE DT
ON (DT.ID_DATE = T.ID_RELEASED_DATE)
LEFT OUTER JOIN D_DATE DB
ON (DB.ID_DATE = BAL.ID_RELEASED_DATE)
LEFT OUTER JOIN D_PROCESSING_UNIT PU
ON (PU.ID_PROCESSING_UNIT = T.ID_PROCESSING_UNIT)
LEFT OUTER JOIN D_BIR_PRODUCT BIRPROD
ON (BIRPROD.ID_BIR_PRODUCT=T.ID_BIR_PRODUCT)
LEFT OUTER JOIN D_GTS_PRODUCT_TYPE GTSPROD
ON (GTSPROD.ID_GTS_PRODUCT_TYPE= T.ID_GTS_PRODUCT_TYPE)
LEFT OUTER JOIN D_GTS_TSACTION_TYPE GTST
ON (GTST.ID_GTS_TSACTION_TYPE = T.ID_GTS_TSACTION_TYPE)
LEFT OUTER JOIN D_CURRENCY CCYT
ON (CCYT.ID_CURRENCY = T.ID_TSACTION_CURRENCY)
LEFT OUTER JOIN d_cif lcif
ON (lcif.id_cif = T.id_liability_cif)
LEFT OUTER JOIN d_cif lbcif
ON (lbcif.id_cif = bal.id_liability_cif)
LEFT OUTER JOIN d_cif bcif
ON (bcif.id_cif = T.id_BENEFICIARY)
LEFT OUTER JOIN d_cif icif
ON (icif.id_cif = T.id_ISSUING_BANK)
LEFT OUTER JOIN d_cif acif
ON (acif.id_cif = T.id_ADVISING_BANK)
LEFT OUTER JOIN d_cif appcif
ON (appcif.id_cif = T.id_applicant)
LEFT OUTER JOIN d_state astate
ON (astate.id_state = acif.id_state)
LEFT OUTER JOIN d_state bstate
ON (bstate.id_state = bcif.id_state)
LEFT OUTER JOIN d_state lstate
ON (lstate.id_state = lcif.id_state)
LEFT OUTER JOIN d_state lbstate
ON (lbstate.id_state = lbcif.id_state)
LEFT OUTER JOIN d_state istate
ON (istate.id_state = icif.id_state)
LEFT OUTER JOIN d_state appstate
ON (appstate.id_state = appcif.id_state)
LEFT OUTER JOIN D_TSACTION_SOURCE TSrc
ON (T.ID_TSACTION_SOURCE = TSrc.ID_TSACTION_SOURCE)
LEFT OUTER JOIN D_COUNTRY LCTRY
ON (LCTRY.ID_COUNTRY = lcif.ID_COUNTRY)
LEFT OUTER JOIN D_COUNTRY LBCTRY
ON (LBCTRY.ID_COUNTRY = lbcif.ID_COUNTRY)
LEFT OUTER JOIN D_COUNTRY BCTRY
ON (BCTRY.ID_COUNTRY = bcif.ID_COUNTRY)
LEFT OUTER JOIN D_COUNTRY ICTRY
ON (ICTRY.ID_COUNTRY = icif.ID_COUNTRY)
LEFT OUTER JOIN D_COUNTRY ACTRY
ON (ACTRY.ID_COUNTRY = acif.ID_COUNTRY)
LEFT OUTER JOIN D_COUNTRY APPCTRY
ON (APPCTRY.ID_COUNTRY = appcif.ID_COUNTRY)
LEFT OUTER JOIN D_COUNTRY PCTRY
ON (PCTRY.ID_COUNTRY = T.ID_PRESENTER_COUNTRY)
LEFT OUTER JOIN D_LOCATION LOC
ON (LOC.ID_LOCATION = T.ID_PROCESSING_LOCATION)
LEFT OUTER JOIN D_CURRENCY BCCYT
ON (BCCYT.ID_CURRENCY = BAL.ID_LIABILITY_CURRENCY)
LEFT OUTER JOIN D_CURRENCY BALCYT
ON (BALCYT.ID_CURRENCY = BAL.ID_BALANCE_CURRENCY)
LEFT OUTER JOIN d_liability_type li
ON (li.id_liability_type = BAL.id_liability_type)
LEFT OUTER JOIN d_cif plbcif
ON (plbcif.id_cif = T.id_liability_cif)
LEFT OUTER JOIN REF_BAC_SORT_CODE plbbac
ON (plbcif.bac_code=plbbac.bac)
LEFT OUTER JOIN D_MARKET_SEGMENT plbmg
ON (plbbac.SORT_CODE=plbmg.MARKET_SEGMENT)
LEFT OUTER JOIN d_cif pbcif
ON (pbcif.id_cif = T.id_BENEFICIARY)
LEFT OUTER JOIN REF_BAC_SORT_CODE pbbac
ON (pbcif.bac_code=pbbac.bac)
LEFT OUTER JOIN D_MARKET_SEGMENT pbmg
ON (pbbac.SORT_CODE=pbmg.MARKET_SEGMENT)
LEFT OUTER JOIN d_cif pappcif
ON (pappcif.id_cif = T.id_applicant)
LEFT OUTER JOIN REF_BAC_SORT_CODE pappbac
ON (pappcif.bac_code=pappbac.bac)
LEFT OUTER JOIN D_MARKET_SEGMENT pappmg
ON (pappbac.SORT_CODE=pappmg.MARKET_SEGMENT)
LEFT OUTER JOIN D_CURRENCY LOCALCYT
ON (LOCALCYT.alpha_code = PU.local_ccy)
LEFT OUTER JOIN D_BRANCH Branch
ON (T.ID_BRANCH = Branch.ID_BRANCH )
LEFT OUTER JOIN F_USD_FX_RATE_HISTORY FX1
ON (BAL.ID_BALANCE_CURRENCY = FX1.ID_CURRENCY and FX1.ID_DATE = (select max(FX11.ID_DATE) from F_USD_FX_RATE_HISTORY FX11 where BAL.ID_BALANCE_CURRENCY = FX11.ID_CURRENCY and FX11.ID_DATE <= BAL.id_released_date))
LEFT OUTER JOIN F_USD_FX_RATE_HISTORY FX2
ON (LOCALCYT.ID_CURRENCY = FX2.ID_CURRENCY and FX2.ID_DATE = (select max(FX22.ID_DATE) from F_USD_FX_RATE_HISTORY FX22 where LOCALCYT.ID_CURRENCY = FX22.ID_CURRENCY and FX22.ID_DATE <= BAL.id_released_date))
LEFT OUTER JOIN F_USD_FX_RATE_HISTORY FX3
ON (BAL.ID_LIABILITY_CURRENCY = FX3.ID_CURRENCY and FX3.ID_DATE = (select max(FX33.ID_DATE) from F_USD_FX_RATE_HISTORY FX33 where BAL.ID_LIABILITY_CURRENCY = FX33.ID_CURRENCY and FX33.ID_DATE <= BAL.id_released_date))Note the lines
ROUND(BAL.MN_AVAILABLE_BALANCE * NVL(FX1.EXCHANGE_RATE,1) / NVL(FX2.EXCHANGE_RATE,1) , 4)
BAL.LIABILITY_BALANCE * NVL(FX3.EXCHANGE_RATE,1)
BAL.MEMO_LIABILITY_BALANCE * NVL(FX3.EXCHANGE_RATE,1)
And
LEFT OUTER JOIN F_USD_FX_RATE_HISTORY FX1
ON (BAL.ID_BALANCE_CURRENCY = FX1.ID_CURRENCY and FX1.ID_DATE = (select max(FX11.ID_DATE) from F_USD_FX_RATE_HISTORY FX11 where BAL.ID_BALANCE_CURRENCY = FX11.ID_CURRENCY and FX11.ID_DATE <= BAL.id_released_date))
LEFT OUTER JOIN F_USD_FX_RATE_HISTORY FX2
ON (LOCAMNYT.ID_CURRENCY = FX2.ID_CURRENCY and FX2.ID_DATE = (select max(FX22.ID_DATE) from F_USD_FX_RATE_HISTORY FX22 where LOCAMNYT.ID_CURRENCY = FX22.ID_CURRENCY and FX22.ID_DATE <= BAL.id_released_date))
LEFT OUTER JOIN F_USD_FX_RATE_HISTORY FX3
ON (BAL.ID_LIABILITY_CURRENCY = FX3.ID_CURRENCY and FX3.ID_DATE = (select max(FX33.ID_DATE) from F_USD_FX_RATE_HISTORY FX33 where BAL.ID_LIABILITY_CURRENCY = FX33.ID_CURRENCY and FX33.ID_DATE <= BAL.id_released_date))Thsi is where I need to incorporate the change -
Need help with conditional query
guys this is just an extension of this post that Frank was helping me with. im reposting because my requirements have changes slightly and im having a hell of a time trying to modify the query.
here is the previous post.
need help with query that can look data back please help.
CREATE TABLE "FGL"
"FGL_GRNT_CODE" VARCHAR2(60),
"FGL_FUND_CODE" VARCHAR2(60),
"FGL_ACCT_CODE" VARCHAR2(60),
"FGL_ORGN_CODE" VARCHAR2(60),
"FGL_PROG_CODE" VARCHAR2(60),
"FGL_GRNT_YEAR" VARCHAR2(60),
"FGL_PERIOD" VARCHAR2(60),
"FGL_BUDGET" VARCHAR2(60)
)data
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','00','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','1','0');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','11','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7200','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('360055','360055','7600','4730','02','10','1','400');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7600','4730','02','10','14','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','14','200');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','10','2','100');
Insert into FGL (FGL_GRNT_CODE,FGL_FUND_CODE,FGL_ACCT_CODE,FGL_ORGN_CODE,FGL_PROG_CODE,FGL_GRNT_YEAR,FGL_PERIOD,FGL_BUDGET) values ('240055','240055','7240','4730','02','11','2','600');
I need to find the greatest grant year for the grant by a period parameter.
once i find the greatest year i need to check the value of period 14 for that grant for the previous year and add it to the budget amount for that grant. however if their is an entry in the greatest year for period 00 then i need to ignore the period 14 of previous year and do this calculation current period +(current period - greatest year 00)
hope that makes sense so in other words with the new data above. if i was querying period two of grant year 11. i would end up with $800
because the greatest year is 11 it contains a period 0 with amount of $400 so my total should be
period 2 amount $ 600
period 0 amount $ 400 - period 2 amount of $600 = 200
600+200 = $800
if i query period 1 of grant 360055 i would just end up with 800 of grnt year 10.
i have tried to modify that query you supplied to me with no luck. I have tried for several day but im embarrased to say i just can get it to do what im trying to do .
can you please help me out.
here is the query supplied by frank kulash who gracefully put this together for me.
WITH got_greatest_year AS
SELECT fgl.* -- or whatever columns are needed
, MAX ( CASE
WHEN fgl_period = :given_period
THEN fgl_grnt_year
END
) OVER () AS greatest_year
FROM fgl
SELECT SUM (fgl_budget) AS total_budget -- or SELECT *
FROM got_greatest_year
WHERE ( fgl_grnt_year = greatest_year
AND fgl_period = :given_period
OR ( fgl_grnt_year = greatest_year - 1
AND fgl_period = 14
;MiguelHi, Miguel,
Are you waying that, when the greatest year that has :given_period also has period='00' (or '0', or whatever you want to use), then you want to double the budget from the given_period (as well as subtract the budget from the '00', and not count the pevious year's '14')? If so, add another condition to the CASE statement which decides what you're SUMming:
WITH got_greatest_year AS
SELECT TO_NUMBER (fgl_grnt_year) AS grnt_year
, fgl_period
, TO_NUMBER (fgl_budget) AS budget
, MAX ( CASE
WHEN fgl_period = :given_period
THEN TO_NUMBER (fgl_grnt_year)
END
) OVER () AS greatest_year
FROM fgl
, got_cnt_00 AS
SELECT grnt_year
, fgl_period
, budget
, greatest_year
, COUNT ( CASE
WHEN grnt_year = greatest_year
AND fgl_period = '00'
THEN 1
END
) OVER () AS cnt_00
FROM got_greatest_year
SELECT SUM ( CASE
WHEN grnt_year = greatest_year -- New
AND fgl_period = :given_period -- New
AND cnt_00 > 0 THEN budget * 2 -- New
WHEN grnt_year = greatest_year
AND fgl_period = :given_period THEN budget
WHEN grnt_year = greatest_year
AND fgl_period = '00' THEN -budget
WHEN grnt_year = greatest_year - 1
AND fgl_period = '14'
AND cnt_00 = 0 THEN budget
END
) AS total_budget
FROM got_cnt_00
;You'll notice this is the same as the previous query I posted, except for 3 lines maked "New". -
select * from testme;
NAME VAL
A 1
A 2
A 3
B 1
B 2
B 3
C 1
C 2
I want to get the maximum of name and the maximum of corresponding name's value.
ie., the answer should be
Name VAL
C 2
Please help me with the query.
ThnxSQL> create table testme
2 as
3 select 'A' name, 1 val from dual union all
4 select 'A', 2 from dual union all
5 select 'A', 3 from dual union all
6 select 'B', 1 from dual union all
7 select 'B', 2 from dual union all
8 select 'B', 3 from dual union all
9 select 'C', 1 from dual union all
10 select 'C', 2 from dual
11 /
Tabel is aangemaakt.
SQL> select max(name) name
2 , max(val) keep (dense_rank last order by name) val
3 from testme
4 /
NAME VAL
C 2Regards,
Rob. -
Hello all,
Total newbie to this pl/sql stuff. So, deseperately need help in my query.
BOOKING_ID BOOKING_STATUS BOOKING_DATE BOOKING_TIME BOOKING_DATE_TIME
1234567 CANCELLED 20090301 37252 5/1/2010 10:20
1234567 CANCELLED 20090301 44229 5/1/2010 12:17
1234567 BOOKED 20090301 39462 5/1/2010 10:57
1234567 CANCELLED 20090301 43549 5/1/2010 12:05
9671111 BOOKED 20090301 68124 5/1/2010 12:57
9671111 CANCELLED 20090301 45001 5/1/2010 12:05
How do I write my query such that I would get the following results:
BOOKING_ID BOOKING_STATUS BOOKING_DATE BOOKING_TIME BOOKING_DATE_TIME
9671111 BOOKED 20090301 68124 2/4/2010 12:17
Basically, I am looking at the latest BOOKING_TIME and making sure the BOOKING_STATUS=BOOKED, if not, don't even bother bring back the result. Hence, you see that BOOKING_ID=1234567 is not required since at the latest BOOKING_TIME=44229, the BOOKING_STATUS=CANCELLED.
Any help is greatly appreciated.
Thank you in advance for your help.
Stanley HoHi, Stanley,
Welcome to the forum!
Whenever you have a question, please post your sample data in a form that people can actually use. CREATE TABLE and INSERT statements are perfect.
For example:
CREATE TABLE booking
( booking_id NUMBER (8)
, booking_status VARCHAR2 (10)
, booking_date_time DATE
INSERT INTO booking (booking_id, booking_status, booking_date_time)
VALUES (1234567, 'CANCELLED', TO_DATE ('5/1/2010 10:20', 'MM/DD/YYYY HH24:MI'));
INSERT INTO booking (booking_id, booking_status, booking_date_time)
VALUES (1234567, 'CANCELLED', TO_DATE ('5/1/2010 12:17', 'MM/DD/YYYY HH24:MI'));
INSERT INTO booking (booking_id, booking_status, booking_date_time)
VALUES (1234567, 'BOOKED', TO_DATE ('5/1/2010 10:57', 'MM/DD/YYYY HH24:MI'));
INSERT INTO booking (booking_id, booking_status, booking_date_time)
VALUES (1234567, 'CANCELLED', TO_DATE ('5/1/2010 12:05', 'MM/DD/YYYY HH24:MI'));
INSERT INTO booking (booking_id, booking_status, booking_date_time)
VALUES (9671111, 'BOOKED', TO_DATE ('5/1/2010 12:57', 'MM/DD/YYYY HH24:MI'));
INSERT INTO booking (booking_id, booking_status, booking_date_time)
VALUES (9671111, 'CANCELLED', TO_DATE ('5/1/2010 12:05', 'MM/DD/YYYY HH24:MI'));What you want is called a Top-N Query .
Here's one way to do it:
WITH got_rnum AS
SELECT booking.*
, ROW_NUMBER () OVER ( PARTITION BY booking_id
ORDER BY booking_date_time DESC
) AS rnum
FROM booking
SELECT booking_id
, booking_status
, TO_CHAR (booking_date_time, 'YYYYMMDD') AS booking_date
, TO_CHAR (booking_date_time, 'SSSSS') AS booking_time
, TO_CHAR (booking_date_time, 'MM/DD/YYYY HH24:MI') AS booking_date_time
FROM got_rnum
WHERE rnum = 1
AND booking_status = 'BOOKED'
;Notice that you don't need PL/SQL to do this; plain old SQL is good enough.
Of course, if you're using PL/SQL for other reasons, you can use a query like this within PL/SQL.
Dates (including time of day) should always be stored in DATE columns.
If you have a DATE column, like booking_date_time, then there's no need for redundant date and time columns.
You can always display just the year-month-day, or just the time, in any format, as I did above.
The output from the query above, with the data above, is:
BOOKING_ID BOOKING_ST BOOKING_ BOOKI BOOKING_DATE_TIM
9671111 BOOKED 20100501 46620 05/01/2010 12:57I realize the booking_date and booking_time columns aren't quite what you posted. If they are not derivable from booking_date_time, then you probably do need separate columns for them, and those columns can easily be added to the query above.
Edited by: Frank Kulash on Feb 5, 2010 4:41 PM
KEEP (DENSE_RANK ...) , like Max used below, is a great tool to have in your kit. The problem with it is that you have to repeat a lot of stuff for every column, so the more columns you have in your output, the more tedious it gets. ROW_NUMBER sclaes much better, and is adaptable to more situations. I suggest you master ROW_NUMBER first, and look into KEEP (DENSE_RANK ...) later. -
PROCEDURE Mktg_Obj_Cmpgn(p_attr_tbl_nm IN attr.attr_tbl_nm%TYPE,p_actn_cd IN chg_log.actn_cd%TYPE) IS
v_tbl_nm varchar2(100);
v_actn_cd varchar2(4);
BEGIN
v_tbl_nm := p_attr_tbl_nm;
v_actn_cd := p_actn_cd;
--dbms_output.put_line(v_tbl_nm);
IF v_actn_cd = 'CRET' THEN
SELECT to_clob(XMLELEMENT("requestmessage",XMLATTRIBUTES(xmlforest(
seq_pblsh_rqst.nextval AS "publish_id")),
XMLAGG(XMLELEMENT("campaign",XMLATTRIBUTES(XMLFOREST(chg.actn_cd AS "ACTION",
pgm.program_idseq AS "parententityvalue",
ent_sbsrb.ENT_ID AS "entid",
pgm.campaign_idseq AS "campaignid",
bus_unt.portfolio_subtype_id AS "campaignsegment",
pgm_typ.pgm_type_nm AS "campaigntype",
LKP.lookup_key_desc AS "campaignclass",
pgm.editor_userid AS "campaignlastmodifiedby",
pgm.edited_dtm AS "campaignlastmodifieddate",
pgm.mkt_initv_proc_tx AS "campaignlink",
ofr.offer_idseq AS "offerlink")))),
XMLAGG(XMLELEMENT("PROCESSCODE", XMLATTRIBUTES(XMLFOREST(action as "link",PROGRAM.program_idseq AS "parententityvalue",
ENT_SBSRB_ATTR.ent_id AS "entid"))))))AS "v_clob" into v_clob1
FROM dual,
chg_log chg,
program pgm,
ent_sbsrb_attr ent_sbsrb,
business_unit bus_unt,
program_type pgm_typ,
offer ofr,
(SELECT lookup_keyword,lookup_key_desc,lookup_type
FROM lookup_key
WHERE lookup_type = 'PRTFL_CMPGN_ID')LKP
WHERE chg.attr_id = ent_sbsrb.attr_id
and chg.parnt_ent_val_tx = to_char(pgm.program_idseq)
and pgm.business_unit_idseq = bus_unt.business_unit_idseq
and pgm.pgm_type_cd = pgm_typ.pgm_type_cd
and ofr.program_idseq = pgm.program_idseq
and pgm.pgm_cls_cd(+) = LKP.lookup_keyword;
END IF;
end Mktg_Obj_Cmpgn;
I have this procedure within a package. v_clob1 is declared in packagebody as a CLOB variable. when i try to compile it i am getting the below given error.can anyone please help me?
(1): PL/SQL: ORA-19208: parameter 1 of function XMLELEMENT must be aliased
(2): PL/SQL: SQL Statement ignoredhi sir,
wanna ask u guyz one query
let say i have table name account(parent) and service(child)
account
id name status
1 john 0
2 ki 1
3 kdf 2
service
id trans_id name status
1 1 et 9999
1 2 eee 2222
2 3 ere 999
2 4 wew 0
i plan to use something like this
delete account from account t1,service t2 where t1id=t2.id and t1.status<>0;
but sql command not correct so plz help me
now i need a query to delete records from service table only but
account.status <> 0 and accound.id=service.id
i dunt want to delete record from account table
so can u help me with this query
thanks
Message was edited by:
mani_um
Maybe you are looking for
-
101 Spec Stock Indicat O Parts prov. Vendor in Quality inspect reporting
Dear all, . We are creating a PO (ME21N) indicating in the view u201CDelivery addressu201D the same vendor than the PO and the flag u201CSubcontracting vendoru201D . The material has in MM02 the inspection type 0130 Receiving Insp. from External Proc
-
I have no problem copying and pasting new icons on files and folders, but I can't seem to get it to work on apps. such as mail. I know there is a way to do this or else system icons wouldn't be available.
-
XI 3.0 - attribute_inv_snd_serv error
Hello, I am transferring from 3rd party to Idoc. Is the solution using table IDXNOALE also valid for a receiver IDOC adapter? I entered the values in the table and indeed the "attribute_inv_snd_serv" error disapeared but the message is now in status
-
My Incredible keeps rebooting in a loop!!!
My Incredible keeps rebooting in a constant loop! The only way to get it to stop is taking the battery out. Can anyone help?? It starts out in the htc incredible tm, then htc quietly brilliant, then the driod, the eye aka camera and reloops all over
-
What is the Customer Service Tel Number???
What is the Customer Service Tel Number?