Help with running Echolink ham radio software and port forwarding

I recently had to replace the router on this system.  The old one a D-Link 624 worked fine with the Echolink program.  The new router a Attiontec M1424-WR will not work with this application.  The ports have been forwarded correctly however, it is unable to make a solid connection.  Any assistance will be most appreciated.  Thanks in advance.  Bill

The problem has been resolved.  Although the Ports were forwarded correctly by the Port Forward Program, The router had to be set to operate in the DMZ area.  This action was not accomplished by the Port Forward Program.  All is working fine now.

Similar Messages

  • Help with running iWeb on multiple computers and find the current site

    I have two Macs and MobileMe. I have usually run iWeb on the laptop and have my website on it. I thought I saved the site in MobileMe. When I go to the desktop and open iWeb it opens up an old version of my site. I search for Domain and none of the options are the current site. On my laptop (the current iWeb version) I opened MobileMe's iDisk and tried a couple of the "Domains" that live on it and none of them are the current version. Now, I can't even get my laptop to open the one I had opened a few moments ago beacuse I can't find the newest domain. So, where is my current domain/ I can't find it.
    I do have a folder on iDisk called "Sites" that contains the HTML files and folders of my current site but I can't seem to get this to open in iWeb. But, this folder does contain the current version but none of the Domain files I have opened refer to these I guess.
    What should I do?
    Guy
    PS I am running the latest iWeb on both computers

    Welcome to the Apple Discussions. As you know for both of you to edit and update the web site both of you must be using the same version of iWeb and working on the same Domain.sites2 file.
    See MacWorld's online article Managing an iWeb site from multiple Macs. However, there are a couple of caveats: 1 - only one can be editing and uploading at a time; 2 - allow plenty of time for Dropbox to update all copies of the domain file.
    What I would do is when you plan on editing the site copy the domain file that's in your Dropbox as a backup. Do you editing and publish. If something goes wrong you'll have the good domain file that was copied just before you started editing. If the site is small and, thus, the domain file the updating will be better insured. Keep both computers online much of the time so the updates will go thru as soon as they are made.
    OT

  • Mac Book Pro with Yosemite 10.10.1 software and a HP Photosmart C4599

    Hello I have a Mac Book Pro with Yosemite 10.10.1 software and a HP Photosmart C4599 All in one printer and I am unable to install my printer, it will print when cable is connected but I cannot add it wirelessly. i have checked for software updates but none are available. 

    Hi,
    A software for a such is no longer available however you may set a wireless connection by following the workaround below:
    Step one: Restore the network defaults:
    1. Press the Wireless button on the product.
    2. Press the button next to the down arrow on the display until Restore Network Defaults is highlighted, and then press OK.
    3. Confirm that you want to restore the network defaults.
    Step two: Turn the wireless radio on:
    1. Press the Wireless button on the product.
    2. Press the button next to the down arrow on the display until Turn Radio On is highlighted, and then press OK.
    Step three: connect the Mac to your printer:
    1. From the Mac click the WiFi icon and then click on Join Other Network.
    2. Click on Show Networks and connect to the listed HPSETUP network.
    Step four: connect the printer to your wireless network via the EWS interface:
    1. Open Safari.
    2. Click the Safari menu and then click Preferences.
    3. From the Advanced tab, check both of the checkmarks under "Include Bonjour" and press OK.
    4. click Bonjour from the top menu, then select the printer to load its EWS page.
    5. Click on Networking, then click the Advanced tab.
    6. Type the wireless network name as SSID.
    7. Select the Infrastructure option
    8. Select the correct security type as WEP Encryption or WPA-PSK Authentication and type the password of your router.
    Note: If you are not sure about the SSID and the security type, click the WiFi icon on your Mac and select Open Network Preferences.
    Click the Advanced button and locate your home network, the Network name aquals to SSID and the exact security type is listed.
    Once you are done click on Apply and the wireless light should lit.
    Then reconnec tthe Mac to your router, open ystem Preferences > Printers & Scanners and add the printer as Bojour by clicking the plus sign.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT1338 Hi i have a macbook with a Mac OS X software and a version of 10.4.11 how do i update

    Hi i have a macbook with a Mac OS X software and a version of 10.4.11.  When i check for a softwareupdate it says that its up to date. How do i update my macbook. Please help

    Choose About this Mac from the Apple menu and check the processor.
    If it's a Core Duo Mac, click here, install the DVD, and run Software Update.
    If it's a Core 2 Duo or better Mac, follow the Core Duo instructions, open the Mac App Store, and try purchasing Mountain Lion. If you get told it's incompatible, phone the online Apple Store and order a download code for Lion.
    (73816)

  • HT4623 I have just updated my i phone 4s with the new ios 6 software and most of my apps have disapeared when i got to the app store and search for an app i cant find i click on it and it says the app is installed. Iff i double click on it it opens. Any i

    I have just updated my i phone 4s with the new ios 6 software and most of my apps have disapeared when i got to the app store and search for an app i cant find i click on it and it says the app is installed. but i cant find it in my apps if i double click on it it opens. Any ideas?
    Thanks Pete

    I have the same problem.  Some of my purchased songs are missing also.

  • I need your help with buying one of your software programs.

    I need your help with buying one of your software programs.
    First of all I do not want to join this “Creative Cloud” for a monthly plan.
    Adobe Illustrator CS6 is what I am wanting but every time I click on the buy button is keeps sending me to a rent page to use but I don’t want this I want to buy it program for my own use. I don’t want to rent it I want to buy it like all the other Adobe software programs that I have bought from you in the past.
    Can you help with problem?
    Tim Adams
    [email protected]

    You can buy CS6 from this page
    Creative Suite 6

  • Are "Back to my MAC" and "Port Forwarding" mutually exclusive?

    I have been using APExtreme and Port Forwarding successfully for several weeks now. The PF is to allow access to game players on a PC which acts as a server on the web. All Good.
    One more thing, I have a ISP provided wireless modem/router to talk to the cable and the world. It seems to work either bridged or un-bridged.
    I have disabled the wireless on the ISP's modem/router. (Actually the ISP's device doesn't hold a candle to the APE.)
    Still all good.
    So the firewall is on in the APExtreme and none on the modem router, and I have a port defined for my gamers to get access to my server in the APExtreme.
    I now want to implement Back to my MAC on my MBP and my other Apple devices. I believe these use iCloud for which I have an account and it seems to be working well with my iPhone.
    In Properties, when I select BtmM, iCloud says communications will be slow if I have port forwarding on. Also I will not be able to use the router function in my Modem/router.
    I'd really like to have the modem/router firewall up, and do the port forwarding there, but the BtmM will likely not get through.
    So what does anyone suggest?
    Can I use BtmM and port forwarding without too much degradation?
    Please advise.
    Thanks
    Barry

    To best answer your question on whether the two are "mutually exclusive," let take a look at how Back to My Mac (BTMM) basically works.
    BTMM - General Requirements
    OS X Leopard 10.7.3+
    Active iCloud account. Each Mac & the AirPort router, that will be relying on BTMM, needs to be configured with the same account.
    A publicly reachable IP address for your router.
    A router that supports either NAT-PMP or UPnP. For AirPorts, be sure it is running 7.6.1+ firmware.
    BTMM uses TCP port 5354 and UDP ports 4500 & 5353 for communications.
    BTMM - Basic Communication Flow
    For a computer connected to the Internet via a router, BTMM "asks" the router for its configuration information. For a router, like your AirPort, that uses NAT-PMP, BTMM will ask the router to assign arbitrary public ports. In turn, the router will provide these port assignments (& the router's Public IP address) back to BTMM.
    BTMM then sends this information to the iCloud account. In background iCloud updates a special set of DNS entries to be used by BTMM. These entries are then made available to all BTMM clients using your iCloud account. When a computer, with BTMM enabled, uses your iCloud credentials, it automatically retrieves a list of all other computers/routers that are registered with the same account. All these devices should then appear under the SHARED section of the Finder.
    When attempting to connect to a remote computer (or router), BTMM creates a secure connection to that remote device using the information from the iCloud account.
    Once the connection is established, the devices can then communicate with each other.
    So potentially, unless you are using Port Mapping for any of the ports BTMM uses, they should not conflict.

  • No devices in DMZ drop down and PORT forward does ...

    Hi,
    We have just purchased B.T broadband with the new home hub, we have set up our hub/router the same as our old one with the correct ports forwarded for exchange to work and remote web space, it all works internally accessing the address but nothing works externally, emails don't get through etc..
    Any ideas?
    Also why does my device not appear in the DMZ drop down?
    Much appreciated any help, thanks a lot

    The home hub firewall will offer no protection to a device in the DMZ, as all incoming ports will be forwarded to the device.
    All you will be left with is the normal NAT function, which is needed to provide a range of local IP adresses.
    If you look at my security page, you will see there is a website you can use to find open ports.
    You may find it better to use a router which supports local loopback.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Xbox 360/one problem and port forwarding

    For a couple months now (since I got my AirPort Extreme) I have not been able to connect to a certain friend on xbox. I can connect to anybody else however. The only way we can (kind of) connect is if somebody else is host and we both connect to him.
    My NAT type is Moderate. When I try to test my connection on my xbox it says that I can connect but I am limited in matchmaking (this is joining games and using voice chat, which is the problem named above for my particular friend). The xbox shows the error and suggests that I enable UPnP or open the port 3074.
    The problem is that I have already have! I gave my xbox a static IP and forwarded the port 3074 to that IP.
    (I have also tried forwarding all the ports that xbox live uses to the xbox. These being:
    Port 88 (UDP)
    Port 3074 (UDP and TCP)
    Port 53 (UDP and TCP)
    Port 80 (TCP)
    as found on the xbox website...  https://support.xbox.com/en-US/xbox-360/networking/network-ports-used-xbox-live
    I made sure to put them in the right text boxes for UDP and TCP so that is not the problem either.)
    I know that the AirPort Extreme does not support UPnP but does have a similar thing called NAT Port Mapping Protocol which was already enabled. (I tried all possibilities of enabling/disabling NAT...Protocol and port forwarding/not port forwarding.)  ---  This is not the solution as I see it
    In short: My xbox tells me to open port 3074. I already have. It still tells me to open it and still won't work.
    I posted this on the apple discussion page (instead of the xbox discussion page) because I know that it's not an xbox problem. When I had my old linksys router it worked perfectly.

    I have this exact same question and problem.  I know this doesn't help, but would appreciate any updated information if you find an answer.  I'll keep working on this also and let you know if I find an anwer.

  • Need help with pictures on an external HDD and windows labtop to Ipad3

    Hallo everybody!
    This week (I finally) bought an Ipad 3 and an Apple TV!
    For the time being I still have a windows labtop and an external HDD full with photo's.
    The ICloud software for windows has been installed because I would like to stream the pictures from this external HDD to my Ipad and then ofcourse on my flatscreen TV (via Apple TV). And ofcourse back, when I have taken a photo or a movie on the Ipad 3.
    I would appreciate some help with the following questions:
    do I have add all pictures from the HDD into a new map on the windows labtop. So that via Icloud the contain could become 'in the cloud'.
    or do I have to add all the pictures from the HDD into the Itunes map on the windows labtop.
    I have connected the Ipad to the windows labtop and via Itunes I have synchroniced a lot of pictures to the Ipad. I asume these are copies? And is it possible to remove them from the Ipad, because it will take a lot of memory (currently already 35 GB from the 64 GB).
    Well I hope somebody could help me.
    Many thanks in advance!
    Ronald from the Netherland

    I just found out that ICloud isen't really a storage place for photo's. Just a passing throw station to your other devices.

  • Help with PageMaker 7.0, Transparent Backgrounds, and Feathering in Photoshop CS5

    Hi all,
    I am hoping  someone here can help me out with a problem that I've been having for  more than a week that I can't seem to figure out and it's driving me  crazy.
    I have a friend who's trying to put together a  graphical instruction manual using PageMaker 7.0.  My friend would like  to have the borders on the pictures in the manual be softened and the  background needs to be transparent, because each page in the manual will  have a background watermark picture.
    I am running into a  number of problems.  I have been using the feather and contrast options  under Refine Edges in Photoshop CS5.  While the picture looks and prints  great from Photoshop, as soon as I save the picture to a file format  that I can import into Word and then PageMaker (more on this step  below), the feathering only either becomes white instead of transparent  (the rest of the transparent part of the picture is still fine) or the  feathering becomes horribly pixelated.
    I am not sure which  step in the process is causing the picture to degrade.  The two file  formats that seem to at least retain the transparency through the  importing process are PNG and TIFF, albeit horribly pixelated.  Could  using these file formats cause the quality issue that I am describing?   Could it be transferring it through Word first, as described below?
    Is  there are any other methods that one can use in Photoshop CS5 to soften  the border of a picture other than feathering that may work better for  these purposes.
    Regarding the use of Word to retain the  transparency into PageMaker... are there any better ways of  accomplishing this?  In order for the transparency to be retained, I  need to add a text box, send it behind the picture, group it together,  and copy the group over in order to retain the transparency using Word.   This, needless to say, is a horribly huge pain in the ***.  Any  suggestions that could cut down the number of steps would be  appreciated.
    Any help with this would be greatly appreciated.  Thanks!

    Pagemaker does support transparency for placed files, just not
    partial transparency like drop shadows or feathering that
    would result in partial transparency.
    You can place an object into pagemaker without getting the
    white background by making a clipping path of the object
    and then saving the file as tiff file. Then you would use
    File>Place in pagemaker.
    You could also put a background behind your object that matches the page in pagemaker
    or use photoshop to make the layout.
    More info on clipping paths
    http://help.adobe.com/en_US/photoshop/cs/using/WS08719555-224E-48db-AC64-FC21F4B87689a.htm l
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7713a.h tml
    MTSTUNER

  • Can anyone help with why an iTunes Radio staion no longer plays?

    Been enjoying the iTunes Radio stations, and selected the Christmas Songs station, have been listening to it, editing it and customizing it to make it my own.  However, it will not play anymore when I select it.  All of my other stations play, just not this one or the Christmas Hit Singers station.  Help is appreciated!

    I believe that was what we just did. It was reprogrammed. I am told i am in an extended network on Telecom towers. I have been here many times before without any such problem. waiting for the tech to get back to me. It was referred to a supervisor.
    << Personal information removed to comply with Verizon Wireless Terms of Service >>
    Message was edited by: Verizon Moderator

  • Help with  running sun jndi tutorial example LookUp.class

    I am learning JNDI,and when I run LookUp.java available in JNDI TUTORIAL ,souce code here:
    * @(#)Lookup.java     1.3 99/08/12
    * Copyright 1997, 1998, 1999 Sun Microsystems, Inc. All Rights
    * Reserved.
    * Sun grants you ("Licensee") a non-exclusive, royalty free,
    * license to use, modify and redistribute this software in source and
    * binary code form, provided that i) this copyright notice and license
    * appear on all copies of the software; and ii) Licensee does not
    * utilize the software in a manner which is disparaging to Sun.
    * This software is provided "AS IS," without a warranty of any
    * kind. ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND
    * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,
    * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE
    * HEREBY EXCLUDED. SUN AND ITS LICENSORS SHALL NOT BE LIABLE
    * FOR ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING,
    * MODIFYING OR DISTRIBUTING THE SOFTWARE OR ITS DERIVATIVES. IN
    * NO EVENT WILL SUN OR ITS LICENSORS BE LIABLE FOR ANY LOST
    * REVENUE, PROFIT OR DATA, OR FOR DIRECT, INDIRECT, SPECIAL,
    * CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER
    * CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT
    * OF THE USE OF OR INABILITY TO USE SOFTWARE, EVEN IF SUN HAS
    * BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
    * This software is not designed or intended for use in on-line
    * control of aircraft, air traffic, aircraft navigation or aircraft
    * communications; or in the design, construction, operation or
    * maintenance of any nuclear facility. Licensee represents and warrants
    * that it will not use or redistribute the Software for such purposes.
    import javax.naming.Context;
    import javax.naming.InitialContext;
    import javax.naming.NamingException;
    import java.util.Hashtable;
    class Lookup {
    public static void main(String[] args) {
         // Check that user has supplied name of file to lookup
         if (args.length != 1) {
         System.err.println("usage: java Lookup <filename>");
         System.exit(-1);
         String name = args[0];
         // Identify service provider to use
         Hashtable env = new Hashtable(11);
         env.put(Context.INITIAL_CONTEXT_FACTORY,
         "com.sun.jndi.fscontext.RefFSContextFactory");
         try {
         // Create the initial context
         Context ctx = new InitialContext(env);
         // Look up an object
         Object obj = ctx.lookup(name);
         // Print it out
         System.out.println(name + " is bound to: " + obj);
         // Close the context when we're done
         ctx.close();
         } catch (NamingException e) {
         System.err.println("Problem looking up " + name + ": " + e);
    after I compiled it sucessfully,I typed
    java LookUp d:/test.java ,error message shown following:
    Problem looking up LookUp.java: javax.naming.NoInitialContextException: Cannot i
    nstantiate class: com.sun.jndi.fscontext.RefFSContextFactory [Root exception is
    java.lang.ClassNotFoundException: com.sun.jndi.fscontext.RefFSContextFactory]
    please help me!

    Read the Preparations chapter of the tutorial.
    It tells you to download and install the file
    system service provider from
    http://java.sun.com/products/jndi/#download

  • Help with running multiple threads

    I'm new to programming with threads. I want to know how to run
    multiple threads at the same time. Particularly for making games
    in Java which I'm also begining to learn. For running multiple
    threads at the same time, do you have to put two run() methods
    in the source? If not then how do you make two threads or more
    run at the same time?
    Thanks for helping.

    For running multiple
    threads at the same time, do you have to put two run()
    methods
    in the source? Hi there,
    Each thread is presumably performing a task. You may be performing the same task multiple times or be performing different tasks at once. Either way, each task would typically be contained within the run() method of a class. This class would either be a subclass of java.lang.Thread (extends Thread) or would be an implementation of java.lang.Runnable (implements Runnable). In either case, you would define a method with signature (public void run()...). The difference comes into play when you wish to actually perform one of these tasks. With a subclass of Thread, you would simply perform:
    new MyTask().start();
    With an implementation of Runnable, you would do this:
    new Thread(new MyTask()).start();
    This assumes you don't need to monitor the threads, won't be sending any messages to your tasks or any such thing. If that were the case, you would need to tuck away those returns to new MyTask() for later access.
    In order to launch two threads simultaneously, you would have something along the lines of:
    new MyTask().start();
    new MyOtherTask().start();
    Now it is perfectly possible that MyTask() would complete before MyOtherTask() managed to start in which case it wouldn't appear as if you had actually had multiple threads running, but for non-trivial tasks, the two will likely overlap. And of course, in a game, these tasks would likely be launched in response to user input, which means that you wouldn't have any control over when or in what order they executed.
    Anyhow, it's as simple as that. You should also consider following the Java Threading trail which shows a simple example of using multiple threads. You can find it at:
    http://java.sun.com/docs/books/tutorial/essential/threads/index.html
    Regards,
    Lynn

  • Help with running bonjour

    I can't get bonjour to run on my computer. I have tried uninstalling, installing the previous version and downloading bonjour for windows from apple.The service starts normally and is running but the IE plugin shows "bonjour service not available", running the printing wizard shows the same. I ran the dns-sd which shows
    c:\>dns-sd -V
    DNSServiceGetProperty failed -65537
    c:\>dns-sd -I
    Registering Service Test.testtxt.tcp.local.
    DNSService call failed -65537
    I have itunes 8 installed, haven't found the need to use bonjour before so would usually uninstall it. Don't know much about bonjour, tried searching the forums but couldn't come up with anything. Can anyone help with this?

    I get into the same situation consistently after switching the network connection from Ethernet LAN to Wireless LAN. The only fix I know of is to restart the PC.

Maybe you are looking for