Help with S_SERVICES configuration for ESS WebDynpro

In the authorization instructions for ESS MyERP2004, it is stated to add required services to the S_SERVICES. Many of the application components in the content administrator have a path longer than the field length to add these services.
Here is the example:
The service names must follow the naming convention <vendor>/<dc>/<Application>. Example: sap.com/ess~us/Per_Address_US
Has anyone completed this? I would appreciate some tips in completing this task successfully.

>What is the theoretical startup settings for sql services
Manual.  The cluster will start them.
>How can we trace why Sql Server stopped ?
Look in the SQL Server Log.
David
David http://blogs.msdn.com/b/dbrowne/

Similar Messages

  • Help with "DAC Configure for Quadrature Mode.vi" in "ni5640R Frequency Translation" Example

    Hi there:
    I am also using the the NI PCI-5640R and I've been "studying" the
    program: "Frequency Translation", my intention is to modify it and
    produce a  closed-loop between I and O. 
    I am also interested in transferring what i am reading through the
    input port, directly to the output port but filtered AND with a
    phase-shift (final Objective: Q-Control). 
    I need to visualize the signal in the HOST, so I need both FIFOS (DMA
    FIFO and  Local FIFO), and the "Quadrature Mode DAC Configure"
    I would like to know:
    1. How can I directly transfer the data acquired through the ADC port
    into the DAC?  (it is unclear due to the Event structure in the
    "Frequency Translation" example)
    2.
    How can I configure the "Quadrature Mode DAC Configure.vi" for it to
    bandpass-filter the signal comming from the ADC at a given frequency
    and BW, specified by the user in the HOST? I have read that it is possible to filter a signal comming to the DAC using DUCs (Digital Upconverters) Does anyone has more info about this topic?
    3. Is it possible to
    configure the "Quadrature Mode DAC Configure.vi" to produce a
    phase-shifted signal (phase shift also specified by user in the host)
    I've
    been working for almost 2 months trying to program the 5640R, doing
    examples, and modifying them.  After playing with different examples
    I've come up to the conclusion that the "Frequency Translation" example
    is the one that best-suites my application.  My problem now is that I
    AM LOST because i need more information regarding the configuration
    parameters of ALL the different VI's inside the NI-5640R VI Tree  to
    exploit them correctly, specially the "Quadrature Mode DAC
    Configure.vi".
    Can anyone please help me?
    Cheers...Antonio

    Hello again:
    Jerry:
    1. I referred to the Event structure, but in the HOST, but now, with your commentary and Philippe's explanation i've undestood better the concept.
    2. Regarding the filtering, I read the datasheet of the AD6654 (DAC from "Analog Devices" which is part of the n5640r) and in pages 36 and 37, it explains with an example, the possibility of designing a Bandpass CIC Filter by changing the interpolation (or decimation) factor of the DUC (or DDC).  The filter can't be fully customized (the rejection and passband are limited to an "Alias rejection Table" in page 36), but it could fit the application to filter certain frequencies.
    I also tryed what you guys suggested, meaning: I designed a simple digital bandpass butterworth IIR filter in the FPGA target inside a 3rd SCTL with a faster clock (i.e. "Top level timing source") and using a 2nd Local FIFO.  The filter was done with FPGA discrete delays (z^-n) departing from a "differences equation" [y(n) = x(n-1)+x(n)+0.9996858*y(n-1)].  But I have problems with the 0.99... constant which is always rounded to 1 (check the pic).  I changed the variable's type and digits of precision, but it still rounds up to 1 Any suggestions?
    3. I was thinking as well of shifting the phase (as Jerry said) by configurating the NCO in the DAC.  Again, more information is given in AD6654's datasheet  (page 35).  I will quote the info:
    "The phase offset register can be written with a value that is added as an offset to the phase accumulator of the NCO.  This 16 bit register is interpreted as 16-bit unregistered integer.  A 0x0000 in this register corresponds to a 0 radian offset and a 0xFFF corresponds to an offset of 2pi*(1 -  1/2^16) radians.  This register allows multiple NCOs (multiple channels) to be sinchronized to produce complex sinusoids with a known steady phase difference:"
    Any ideas of how to program this register inside the "ni5640r ADC Configure NCO" to have a fixed phase offset of 90º?
    Thanx in advance for your replies
    'till the next post...Antonio
    Attachments:
    Digital IIR.JPG ‏122 KB

  • Need help with classpath configuration for external jar files

    We have coded our own JAAS login module, and it uses classes located in jar files, and these jar files were not created using SAP dev studio, e.g. they were provided by a third party vendor as a set of tools.
    So, how do we deploy these jar files so that our SAP JAAS login module can find them ? We found we can run consoleconfig.sh to change the classpath which SAP J2EE engine uses, but we wondered if there was a better way to do this. Of course, if the jar files were created by us, we can include them in the dev studio project and they would be deployed using SDM, and this would not require any changes to classpath using consoleconfig.sh
    Thankyou in advance for your help.

    I noticed nobody has sent any feedback on this yet, so I wondered if I have posted to the wrong forum ? Any thoughts on this ?
    Thanks,
    Tim

  • Need Help With Best Configurations for Airport Express

    I have to macs and an ipod touch that are usually connected to the same wifi. when I am watching a youtube video or downloading something the connection gets really slow on the other machines.
    For example:
    i am downloading a movie from the itunes store and i am trying to watch a youtube video on the other computer or checking my email on my iPod, the connection is really slow.
    Is this because of the internet connection (3mbs)? or the express??
    So i want to know if there are any settings aside from the factory settings to make it faster.
    BTW: there are usually 4-5 other wifi's near me.
    and the macs are less than 15 ft away from the airpost express..
    thanks for any help!!!

    The issue is the speed of your Internet connection.
    You are doing very heavy downloads and therefore your limited 3mpbs capacity is not enough to meet the demand.
    The Airport Express can provide much higher throughput that your internet connection so the problem is not there.

  • I have an ut ipad 2 with no configuration for the i cloud. I have follow the instructions of synch the ipad with itunes v 10.6 in my pc, but i can not get the display of the cloud icon in the general settings of the ipad. appreciate any help

    I have an ut ipad 2 with no configuration for the i cloud. I have follow the instructions of synch the ipad with itunes v 10.6 in my pc, but i can not get the display of the cloud icon in the general settings of the ipad. appreciate any help

    I'm asking because ios5 introduced iCloud. You have to have updated to ios5 to see it.

  • Help on Customization (SPRO) for ESS

    Hello,
    I am new to ESS.
    I need help on Customization (SPRO) for ESS.
    If you have any Documents or PDF-s on the same?
    Thanks.

    Hello Gautham,
    I am sorry for the late reply.
    I have stopped watching this thread, hence, never noticed your message.
    Check out :
    1) [Configuring the Business Package for Employee Self- Service (ESS) - mySAP ERP 2004 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a] .
    2) [ESS : How to Add Custom Area Page to Overview Page|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0235c40-6351-2a10-a3a3-eb666dfdb407]
    This explains how you can add an area page, for a custom WebDynpro application changing SPRO settings.
    The pdf does not explain how a server is added for the resources you use.
    If it's defined in your system, then you can skip the step :
    Server is added under
    Resources->Define Server for Resources
    Protocol          : http
    Name and port : <server>:port
    Directory path  : sap/bc/bsp/sap/public/hcm/XSS
    Cross check the path with SICF.
    Even when you add a picture of your choice in MIME repository, make sure you follow the same path, viz: sap/bc/bsp/sap/public/hcm/XSS
    Hope this helps!
    Cheers,
    Remi

  • Persona Data & Family Member Data Country screen with Middle Name for ESS

    Friends,
    I am using country version 99 and working on new Implementation of ESS on ECC6.0.
    Can any body help me with the following for ESS:
      1. Which Personal Data Country screen has got Middle name field?
      2. Which Family Member/Dependent Data Country screen has got Middle name field?
    Thanks for your help.
    Preethi

    I think MOLGA 10 and/or 26 should do.
    Yash

  • New to Oracle - could really use help with memory configuration

    I'm new to Oracle and am assuming the support role on a system that is using Oracle 8.1.7 as the database server and need help with memory configuration.
    The server is being used with FileNet and we're having issues while trying to purge logs (purge never completes) and the disk drive activity LED is on almost solid. My guess is is that it's not using enough/doesn't have enough memory therefore constantly reading off the disk and going too slow to finish the purge between nightly backups in which the database service is stopped.
    The server is running on Windows 2000 Server SP4, has 1G of RAM and is dual-Xeon processor.
    Any help or starting point references would be greatly appreciated.

    Hi ...
    You can use a StatsPack for guess the best distribution memory with your DB needs.
    See metalink Note:228913.1
    Regards

  • HELP HELP HELP with adminstrator password for pavilion dv7 beats audio

    Hi. I need help with  adminstrator password for pavilion dv7 with window 7. I don't remember with is the  adminstrator password for pavilion dv7 beats audio. Is there anyway you can help me with this? once i enter 3 times is gives me this system disabled code: 52464663.  

    Hi
    Try this Key : 43542265 That should fix your issue 
    Hope this helps.
    ***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
    ****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
    -VJ
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • Are iPads built with different configurations for different countries?

    Are iPads built with different configurations for different countries?

    deebeeque wrote:
    I live in the U.S. but am moving to Brazil. I would like to purchase an iPad here in the U.S. but want to have it set up for Brazil, ie: language, operation, WiFi. Can all of this be done by selecting the country specific configuration at the setup stage?
    You can certainly chose the language when you set it up. WiFi is an international standard, no difference between US and Brazil. You can further go into Settings - General - International and select language, as well as keyboards and region format.
    Also, Is it possible to order the iPad (to be shipped to me in the U.S.) with packaging material (ie: operation manual, etc.) in the Brazilian Portuguese language?
    There is no operation manual included - English, Portuguese, or any other language. You can find the one you need at http://support.apple.com/pt_BR/manuals/.
    Additionally, does Brazil have 4G?
    I'm not sure, but as of now the only countries where the iPad 4G will work are the US and Canada - other countries that have 4G use different frequencies.

  • Help with Simple Applescript for Midipipe

    Hey all, I'm in desperate need of help with some Applescript for use in a program called Midipipe:
    http://web.mac.com/nicowald/SubtleSoft/MidiPipe.html
    I simply require an Applescript for Midipipe that filters out all OFF notes except for the most recently pressed key, or most recently pressed ON note. So for example, when multiple keys have been pressed, only the most recently pressed key will send an OFF note. I hope that is clear enough, i've had some major issues trying to get this work and my last hope is to hit the forums and find some help .. I've posted on some of the audio forums and i'm hoping someone here knows how to code this.
    Thanks so much!! .. Its for an upcomming show next week so i'm hoping someone can get me in the right direction to solving this.
    -Jes

    I try to help, but you'll need to apply your brain cells to get it working with what I've already explained (three times with what I offer below).  Try something like the following (I am renaming your buttons to ch1,ch2,ch3,ch4,ch5,ch6 so that the same functions can be shared by all buttons...
    // this assigns listeners to all 6 buttons
    for(var i:uint=1; i<7; i++){
              this["ch"+String(i)].addEventListener(MouseEvent.CLICK, fl_ClickToSeekToCuePoint);
    // this processes any one of the 6 btns when they are clicked
    function fl_ClickToSeekToCuePoint_1(event:MouseEvent):void
        var btn = event.currentTarget;
        var cuePointInstance:Object = vid.findCuePoint(btn.name);
        vid.seek(cuePointInstance.time);
       resetButtons();    // this makes all buttons go back to normal
        btn.upState = btn.overState; // this makes the clicked button change states
    function resetButtons():void {
         for(var i:uint=1; i<7; i++){
              this["ch"+String(i)].upState =  this["ch"+String(i)].hitTestState;
    For this to work, your buttons need to have the same artwork in the hit frame as they do in the up frame.

  • I still need help with the Dictionary for my Nokia...

    I still need help with the Dictionary for my Nokia 6680...
    Here's the error message I get when trying to open dictionary...
    "Dictionary word information missing. Install word database."
    Can someone please provide me a link the where I could download this dictionary for free?
    Thanks!
    DON'T HIT KIDS... THEY HAVE GUNS NOW.

    oops, im sorry, i didnt realised i've already submitted it
    DON'T HIT KIDS... THEY HAVE GUNS NOW.

  • System configuration for ESS/MSS Implementation

    Hi,
    I am stuck while configuring the systems for XSS configuration. I have completed following:
    1) Installed Portal 7.00 (based on NW2004s) which uses the backend ERP2005 system as a User Master source.
    2) Implemented the business packages for ESS 1.0 (SP6), MSS 1.0 (SP6) and SAPPCUI_GP 600 (SP6).
    3) Configured the SLD ( we have SLD running on a separate XI system)
    4) Configured JCO destinations (tested ok).
    5) Configured Systems for Portal and the ERP systems with system aliases.
        For Portal System:   I have only configured the WAS properties (i.e. hostname, path and protocol).and User management (using UDIPW as the logon method)
    The system alias is SAP_WebDynpro_XSS
        For ERP System:  I have configured connection, user management and W.A.S. properties. The system aliase is SAP_ECC_HumanResources
    However, when I perform the connection tests for both systems, they both fail for "Connection Test for connectors" test.  It gives the message "Connection failed. Make sure the user mapping is set correctly and all connection properties are correct".
    Any help is greatly appreciated.
    Regards.

    Hi Kristoffer,
    I have tried as per your suggestion but it still gives an error.
    The connector properties for my ERP system are as below:
    Application Host  : C1BL1 (also included the domain)
    Gateway Host   : C1BL1
    Gateway Service  : sapgw00
    Logical System Name   : ER1CLNT210    
    Remote Host Type -  3
    SAP Client   : 210
    SAP System ID (SID)  : ER1
    SAP System Number  : 00
    Server Port  : 3200
    System Type - SAP_R3
    System aliases for ERP system are:
    SAP_ECC_HumanResources and SAP_R3_Financials.
    I have not maintained any W.A.S. properties for this system.
    For my Portal system: WAS properties are:
    Web AS Description  : EP_Portal
    Web AS Host Name  : C1BL3:50100
    Web AS Path   : /webdynpro/dispatcher/
    Web AS Protocol - http
    I had not maintained the connector properties for this system before, but I have now maintained as following:
    Application Host  : C1BL1 (also included the domain)
    Logical System Name   : ER1CLNT210    
    Remote Host Type -  3
    SAP Client   : 210
    SAP System ID (SID)  : ER1
    SAP System Number  : 00
    Server Port  : 3200
    System Type - SAP_R3
    The system alias for EP is: SAP_WebDynpro_XSS
    In the UME configuration --> User mappings, I am using SAP_ECC_HumanResources system as the reference system.
    Please let me know if you need more info.
    Regards,
    Nilesh

  • SAP IDES ECC 6.0 configuration for ess/mss

    Hi,
    Iam new to sap . i want to practice various scenarios in ess/mss in my own pc which  is installed with ecc 6.0 . what are the configuration to be made in ecc 6.0 for maintaining about 10-20 users for  using ess/mss scenarios. i have a knowledge on webdynpro java and little knowledge on ep and using r/3 server. The 10-20  users created should be able to use ess/mss through portal .
    So, list the steps configuring for 10-20 users for using ess/mss in ecc ides 6.0 server.
    Thanks & regard
    prasad

    << Do not post the same question across a number of forums >>

  • Help with EasyLink Advisor for WRT54GS

    Ok when I try and bring up the EasyLink Advisor for my router it says Administrator Privileges Required then under that it says You must be logged on as a user with administrator privileges to modify the computer's configuration for home networking. The thing is though that I am logged in as the administrator. I have never had this message appear before. I have gotten on the EasyLink Advisor numerous times to find the IP Address and stuff so I can connect my Xbox, iPod Touch wifi, and stuff like that. But now it won't let me do anything. I used to have Windows Vista on my computer but then I upgraded to Windows 7 and I think this is the problem because it started happening after I upgraded. Help!
    Solved!
    Go to Solution.

    Yes the Easy Link Advisor is not supported on Win 7.  You don't need it anyway.  Simply connect to 192.168.1.1 with user name blank, password admin and check all status from the router itself.

Maybe you are looking for