Help with saving music to a portable HD
In the edit> preferences> advanced area in itunes I had always marked to save all music that is downloaded to my itunes music to also save into the itunes music folder. I had to reinstall itunes about 5 times due to PC issues, nothing to do with itunes or the touch.
The last time (which finally worked with the PC) I forgot to go into the edit
tab and mark this option. Now all the music that I have put into my itunes is not in my itunes music folder on my PC.
The only info I can find regarding saving my music is to save to a disc, which I don't want to do. Can anyone walk me through how to save music from my itunes on to a portable hard drive.
Thanks for any help!
Thanks for the reply. That is what I did when I had to save my music before sending in the PC for repair. I apologize, I wasn't too clear on my question.
The music that I have recently downloaded since I put the itunes back onto my computer is not in my itunes music folder. Since I didn't mark it to do that on the preferences page when I reinstalled itunes.
I hope I am saying this right. I have all the old stuff in my itunes music folder but none of the new stuff since I didn't make that a preference.
Is there a way to get the new stuff saved?
Similar Messages
-
Help with Saving & Exporting Files.
Ok, so I've gone on these forums and on google trying to find a solution to this.
But none of the solutions they had given worked...And frankly making my own is easier to find. XD
But anyways.
I just got Adobe Illustrator CS3 today.
It is the portable version; I don't know if tthat would make a difference since the options are still available.
But when I try to save the image, it doesn't matter what I try to save the file as, it says an error occured and it couldn't save the file.
And now I'm trying to export it into Photoshop CS4 (Also Portable but again, all of the options are available.) so I can color it. (Its a inked drawing of a previously lead drawing.)
When I try to export it; I get a message saying I do not have enough memory to save the file. Which I have a tetrabyte hardrive that isn't even nearly full.
What's going on with saving and exporting???
And I've read about people copying and pasting the different layers into Photoshop, if thats what I have to do, thats OK...But could someone please explain to me how I can do that?
Thank you. :]No kidding and thi character is on the forum asking for help?
BTW when you install this cracked version be aware that these very beneficent care takers of the public rights have also probably installed spyware on your computer.
Also errors etc. are expected and there is no cure except to contact those you got the sold you this stuff and even if it is free once you do they will find a way to use the spyware.
Enjoy it.
To the forum host remove this thread fro the forum. -
Need help with saving data and keeping table history for one BP
Hi all
I need help with this one ,
Scenario:
When adding a new vendor on the system the vendor is suppose to have a tax clearance certificate and it has an expiry date, so after the certificate has expired a new one is submitted by the vendor.
So i need to know how to have SBO fullfil this requirement ?
Hope it's clear .
Thanks
BonganiHi
I don't have a problem with the query that I know I've got to write , the problem is saving the tax clearance certificate and along side it , its the expiry date.
I'm using South African localization.
Thanks -
Help with saving FarmVille game data...
Ok, I need a bit of help...
I have an issue with saving data from a facebook game, FarmVille.
On my old computer which was running Windows XP when playing FarmVille the game only ever used to reload when it was updated. If I quit the game then went back in and it appeared to be loading the content from some saved data as it would load straight away compared with the 5 minutes it took when ever the game was updated.
I have now bought a new computer running Windows 7 and when I play FarmVille it now wants to reload from scratch each time I go into the game and it is sucking up my broadband usage really quick by doing this.
I have been trying to play around with different settings to see if I can get flash player to save the data but nothing seems to work. I am now starting to think it may not be flash player that is the problem.
If anyone knows how to fix this problem it would be greatly appreciated.
Thanks.I am using IE9 but I do not have that setting set and I hardly ever delete all my history etc.
I have also just tried playing on my partners apple which I dont know much about except that it is about 5 years old. Anyway the apple is doing the same thing that this new computer is doing... hmmm. -
Help with saving attachments from iphone email to my phone
Hi...can anyone help me with saving photos sent to me in jpg as attachments in email ....can see them in email but unable to save photos? cant seem to find how to in tech. information..thanks!!
You may want to submit this as a feedback or feature request.
This link allows you send feedback on any Apple product.
http://www.apple.com/feedback/ -
Help with transferring music files from my Maxtor external HD
Can anyone please help? I have been using Windows based PCs for a majority of my life. I recently purchased a Macbook. I have thousands of songs saved on a Maxtor external hard drive. I recently connected the HD to my Macbook and was able to successfully copy over all of the photos I have saved and only few of the audio files. I checked the audio files are saved in itunes format. Why can I not copy all of my music over? Please help!
You could try something like this, if you haven't thought of it already. On the PC side make a new folder, probably at the top level, or perhaps next to the one folder that you could see on the Mac side. Or maybe inside the one folder you can see on the Mac side. Maybe create a new file in it, such as a simple text file. Then see if the new folder and file can be seen on the Mac side. If so, go back to the PC side and try copying one of the mp3 files that couldn't be seen into that new folder. Also, move one mp3, as distinct from copying. Back to the Mac side, see if you can see them.
Now, if you could see the new text file, but can't see the copied mp3, that implies the problem is somehow with the mp3 files. Or the folders they are in.
If you couldn't see the new folder, then the problem isn't the files, but (I guess) something obscure and arcane about the filesystem.
Hopefully, the new folder and its contents will be visible on the Mac side, in which case the path forward should be clear.
Do you have an extremely large number of song files in a single folder? Grasping at straws, but maybe the Mac has some dumb limit that's smaller than the equivalent limit on the PC side. I've never heard of such a thing, but when things are weird, it's a good time to think of oddball possibilities... -
Help with purchased music w/ old apple ID no longer in use... how do i access the music?
i purchased music with an apple id i no longer use and no longer have the email address/or password -- had to shut email down years ago. how do i access the music in itunes that I purchased on my new computer with my current apple id (which I have also now had for some years)? thank you for any help.
buddsct wrote:
I can not acces that apple ID...
Why not?
-> https://iforgot.apple.com/appleid -
How can I save a photo as 1920X1920 pixels when the photo isn't square? This photo must be saved as baseline standard JPEG. File size must be < 1.8 mb. Color space should be saved in RGB color space preferablySRGB
Set the color profile first: Image -> Convert Color Profile -> Covert to sRGB
In order to save with those dimensions, the image must be cropped first. However, the crop tool uses inches or cm instead of straight pixels. To get the desired size: Go to Image -> Resize -> Image Size, enter 1920 as one of the pixel dimensions and note the resulting inch/cm measurement. Cancel this screen and click on the crop tool. The aspect ratio should be set to 'Custom', enter the inch equivalent of 1920 pixels for both the width and the height and crop the image with a resolution of 72 pixels/inch.
Save the file: File -> Save For Web... (because this will give you the smallest file sizes) On the right, make sure the file type is set to JPEG (the default is GIF) and reset the pixel dimensions to 1920 and hit apply (it automatically adjusts the sizes for website which usually require dimensions under 1000). The file size displays under the preview along with approximate load times. Click okay and save the file where you want it.
It would probably be helpful to read up on how to set your workspace to default to sRGB in order to save time if you're doing this a lot.
I hope this answers your question. -
Help with saved pdf' s,"more request cannot be completed.Service book information not found"
Hey from south africa,I'm using the curve 8520 on MTN service provider.I came across a problem a while ago where I had to setup my email address again,I had an email with some pdf's saved.They were working well until the re-setup,now when I try to load ones that I haven't read it gives me the error "More request cannot be completed.Service book information not found".I've sent the email back to myself but no luck,help.Thanks in advance.
You need to reset your email account again on your device & send the service books from the same interface on your device. Wait for the 30mins & register now yourself from the handset itself by following the below steps-click on Option Application-click on Advanced - Click on Host Routing table - Click menu key - select Register now option & Click, Follow these steps twice. Now go into your email application & click on it. Then press the menu key & scroll down,you can see Reconcile now option, Click on it twice !
Now try to open that PDF again ! -
I recently started studying in IT at college, and I think I have the basics in Java programming, however we haven't
been taught how to save data in our apps, so everytime i close my app, I lose all changes.
I went through Sun's IO tutorial, as well as a few tutorials online and I made a small application to practice saving my
Objects, however I can't seem to get it to work. I was hoping someone could look at my code and tell me what seems
to be my problem.
There are 3 classes in my project. The Base class makes a List that holds objects of type Person. the UIPerson class
has 3 buttons (Add, Save, Load) and a JList. When clicking on Add, it adds a new Person in the base and is shown in
the JList. The saving and loading is what I have trouble with.
UIPerson :
public class UIPerson extends JFrame implements Serializable{
private JFrame jFrame = null;
private JPanel jContentPane = null;
private JButton jbAdd = null;
private JButton jbSave = null;
private JButton jbLoad = null;
private JList list = null;
private Base base = null;
public static void main(String args[]){
UIPerson personList = new UIPerson();
public UIPerson(){
base = new Base();
Container pane = getContentPane();
setSize(288, 309);
setVisible(true);
jContentPane = new JPanel();
jContentPane.setLayout(null);
jbAdd = new JButton();
jbAdd.setBounds(new Rectangle(24, 59, 58, 24));
jbAdd.setText("Add");
jbAdd.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent e) {
String Name, famName;
Name = JOptionPane.showInputDialog("Enter Name", null);
famName = JOptionPane.showInputDialog("Enter Family Name", null);
base.addPerson(new Person(Name, famName));
list.setListData(base.listPerson());
jbSave = new JButton();
jbSave.setBounds(new Rectangle(19, 106, 69, 34));
jbSave.setText("Save");
jbSave.addActionListener(new java.awt.event.ActionListener(){
public void actionPerformed(java.awt.event.ActionEvent e){
try{
FileOutputStream fos = new FileOutputStream("temp.dat");
ObjectOutputStream oos = new ObjectOutputStream(fos);
oos.writeObject(base);
catch(Exception ex){
System.out.println("Save Failed");
jbLoad = new JButton();
jbLoad.setBounds(new Rectangle(23, 154, 70, 29));
jbLoad.setText("Load");
jbLoad.addActionListener(new java.awt.event.ActionListener(){
public void actionPerformed(java.awt.event.ActionEvent e){
try{
FileInputStream fis = new FileInputStream("temp.dat");
ObjectInputStream ois = new ObjectInputStream(fis);
base = (Base)ois.readObject();
list.setListData(base.listPerson());
catch(Exception exc){
System.out.println("Load Failed");
list = new JList();
list.setBounds(new Rectangle(133, 47, 139, 151));
jContentPane.add(jbAdd);
jContentPane.add(jbSave);
jContentPane.add(jbLoad);
jContentPane.add(list);
pane.add(jContentPane);
}Base :
public class Base implements Serializable{
private ArrayList<Person> list;
public Base(){
list = new ArrayList<Person>();
list.clear();
public void addPerson(Person person){
list.add(person);
public void deletePerson(Person person){
list.remove(person);
public Person[] listPerson(){
Person tab[] = new Person[list.size()];
list.toArray(tab);
return tab;
public Person getPerson(Person person){
ListIterator<Person> iterator = list.listIterator();
Person current = null;
while (iterator.hasNext()){
current = iterator.next();
if (current.equals(person))
return current;
return null;
}Person :
public class Person {
private String name, familyName;
public Person(String name, String familyName){
this.name = name;
this.familyName = familyName;
public String getName(){
return name;
public String getFamilyName(){
return familyName;
public String toString(){
return name + " " + familyName;
}I'd appreciate any help that could be given.My probelm is with my save/load funtions only, sorry for the extra code. Everytime i press on save or load, they
throw an IOException. Heres the code I specifically wanted viewed to know if there are any mistakes in it.
Save Button :
jbSave.addActionListener(new java.awt.event.ActionListener(){
public void actionPerformed(java.awt.event.ActionEvent e){
try{
FileOutputStream fos = new FileOutputStream("temp.dat");
ObjectOutputStream oos = new ObjectOutputStream(fos);
oos.writeObject(base);
catch(FileNotFoundException ex){
System.out.println("(Save)File Not Found Exception");
catch(IOException ex){
System.out.println("(Save)IOException");
});Load Button :
jbLoad.addActionListener(new java.awt.event.ActionListener(){
public void actionPerformed(java.awt.event.ActionEvent e){
try{
FileInputStream fis = new FileInputStream("temp.dat");
ObjectInputStream ois = new ObjectInputStream(fis);
base = (Base)ois.readObject();
list.setListData(base.listPerson());
catch(FileNotFoundException exc){
System.out.println("(Load) File not found exception");
catch(IOException exc){
System.out.println("(Load) IO Exception");
catch(ClassNotFoundException exc){
System.out.println("(Load) Class not found exception");
}); -
I Need help deleting music off my iphone 4 with ios 7.
I can't do anything on my phone because it says my "storage is full".
Itunes says that I have all of my music that's in my libary on my phone
but I only want my "checked" songs on my phone.
So far there is 300 or so songs on my phone and I only want about 30 of them.
EVERYTHING that people have told me to do, has not woked.
I have the "show all music" off
I have the "itunes match" off
I have the "home sharing" off
!!!!!PLEASE HELP!!!!!!With the 4 connected to the computer, select File > Transfer Purchases. Any content acquired via iTunes on the device will transfer to iTunes on the computer. This assumes that the Apple ID used to purchase the content on the device is the same Apple ID that the computer is authorized for.
Also, some content in iTunes is available for redownload: http://support.apple.com/kb/ht2519 -
Help with Saving Progressive Layers as Video or Files
Hi, I am interested in creating an animated video with Photoshop. I have 80+ layers, each one building on the last. For example, layer 1 is a simple horizontal line ( - ). Layer 2 is a simple vertical line ( | ). With both layers on, they form a cross ( + ). Layer 1 must be visible for layer 2 to make sense, within the video. So, each previous layer must remain visible when the next layer is turned on. Then the next, then the next.
Previously, I have manually saved layer 1 as a JPG, turned on layer 2 and saved the new file, turned on layer 3, saved the next new file,and so on, until I go through all layers. Then I used a video editing program to put the files in sequence and render it as a video.
I am hoping PS (CS5) can help me. I need to render a video with each layer turning on (perhaps a .03 second delay, like in the animation strip) but with all previous layers remaining on. Onion skin's max layers is 8, so that doesn't work for me.
If I can't render the video directly from PS, how can I create an action that will
1. save file without a prompt as JPG with the layer name as the file name, in the directory where the PSD file resides
2. make visible the next layer up (or down, whatever)
3. repeat until all layers are complete, no matter how many layersThey aren't necessarily only line drawings. As an animated video, it may be line drawings, then a photo, then drawings on the photo. So it's something like this:
layer 0 = black background
layer 1 = white vertical line
layer 2 = blue horizontal line
layer 3 = photograph in the upper left corner
layer 4 = blue dot over the photograph
An example of one of my shorter films is
I did that by saving every layer as a separate JPG, then putting it together in a video editor. That's how I've always done it, but that won't work anymore due to the volume of the layers. -
Need help with saving item from combobox to textfile
Hi all. right now my codes can only save one stock information in the textfile but when I tried to save another stock in the textfile , it overrides the pervious one.
So I was wondering which part of my codes should be changed??
DO the following
Create a fypgui class and put this bunch of codes inside
import java.awt.GridLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.KeyEvent;
import java.awt.event.KeyListener;
import java.io.BufferedInputStream;
import java.io.BufferedReader;
import java.io.DataInputStream;
import java.io.File;
import java.io.FileReader;
import java.io.FileWriter;
import java.io.IOException;
import java.io.InputStream;
import java.net.URL;
import java.util.ArrayList;
import java.util.Scanner;
import javax.swing.JButton;
import javax.swing.JComboBox;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTabbedPane;
import javax.swing.JTable;
public class fypgui {
private ArrayList<Stock> stockList = new ArrayList<Stock>();
private String[] stockArray;
private JComboBox choice1;
private JTabbedPane tabbedPane = new JTabbedPane();
private JPanel displayPanel = new JPanel(new GridLayout(5, 1));
private JButton saveBtn = new JButton("Save");
private JPanel choicePanel = new JPanel();
String yahootext;
String symbol;
int index;
public fypgui() {
try {
//read from text file for stockname
File myFile = new File("D:/fyp/savedtext2.txt");
FileReader reader = new FileReader(myFile);
BufferedReader bufferedReader = new BufferedReader(reader);
String line = bufferedReader.readLine();
while (line != null) {
Stock stock = new Stock();
// use delimiter to get name and symbol
Scanner scan = new Scanner(line);
scan.useDelimiter(",");
String name = "";
String symbol = "";
while (scan.hasNext()) {
name += scan.next();
symbol += scan.next();
stock.setStockName(name);
stock.setSymbol(symbol);
stockList.add(stock);
line = bufferedReader.readLine();
//size of the array(stockarray) will be the same as the arraylist(stocklist)
stockArray = new String[stockList.size()];
for (int i = 0; i < stockList.size(); i++) {
stockArray[i] = stockList.get(i).getStockName();
//create new combobox
choice1 = new JComboBox(stockArray);
//For typing stock symbol manually
choice1.setEditable(true);
//set the combobox as blank
choice1.setSelectedIndex(-1);
} catch (IOException ex) {
ex.printStackTrace();
JFrame frame1 = new JFrame("Stock Ticker");
frame1.setBounds(200, 200, 300, 300);
JPanel panel1 = new JPanel();
panel1.add(choice1);
choice1.setBounds(20, 35, 260, 20);
JPanel panel2 = new JPanel();
JPanel panel5 = new JPanel();
panel5.add(saveBtn);
displayPanel.add(panel1);
displayPanel.add(panel5);
tabbedPane.addTab("Choice", displayPanel);
tabbedPane.addTab("Display", choicePanel);
JLabel label2 = new JLabel("Still in Progress!");
choicePanel.add(label2);
frame1.add(tabbedPane);
frame1.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame1.setVisible(true);
saveBtn.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
// initalize index as the postion of the stock in the combo box
index = choice1.getSelectedIndex();
/*if the postion of the combobox is not blank,
it will get the StockName and symbol according to the
position and download the stock*/
if(index != -1){
symbol = stockList.get(index).getSymbol();
save(symbol);
@SuppressWarnings("deprecation")
public void save(String symbol){
try {
String part1 = "http://download.finance.yahoo.com/d/quotes.csv?s=";
String part2 = symbol;
String part3 = "&f=sl1d1t1c1ohgv&e=.csv";
String urlToDownload = part1+part2+part3;
URL url = new URL(urlToDownload);
//read contents of a website
InputStream fromthewebsite = url.openStream(); // throws an IOException
//input the data from the website and read the data from the website
DataInputStream yahoodata = new DataInputStream(new BufferedInputStream(fromthewebsite));
// while there is some contents from the website to read then it will print out the data.
while ((yahootext = yahoodata.readLine()) != null) {
File newsavefile = new File("D:/fyp/savedtext.txt");
try {
FileWriter writetosavefile = new FileWriter(newsavefile);
writetosavefile.write(yahootext);
System.out.println(yahootext);
writetosavefile.close();
} catch (IOException e) {
e.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
public static void main(String[] args) {
// TODO code application logic here
new fypgui();
Create a Stock class a put this bunch of codes inside
public class Stock {
String stockName ="";
String symbol="";
double lastDone=0.0;
double change =0.0;
int volume=0;
public String getStockName() {
return stockName;
public void setStockName(String stockName) {
this.stockName = stockName;
public String getSymbol() {
return symbol;
public void setSymbol(String symbol) {
this.symbol = symbol;
public double getLastDone() {
return lastDone;
public void setLastDone(double lastDone) {
this.lastDone = lastDone;
public double getChange() {
return change;
public void setChange(double change) {
this.change = change;
public int getVolume() {
return volume;
public void setVolume(int volume) {
this.volume = volume;
Create a folder called fyp in D drive and create two txt file in it.
-savedtext.txt
-savedtext2.txt
in the saved savedtext2.txt add
A ,AXP
B ,B58.SI
C ,CLQ10.NYM
this is my whole application. if you guys can tell me what can I do to make sure that the stock info doesn't overrides . I will more than thankful.
Edited by: javarookie123 on Jul 9, 2010 9:49 PMjavarookie123 wrote:
Hi all. right now my codes can only save one stock information in the textfile but when I tried to save another stock in the textfile , it overrides.. 'over writes'
..the pervious one.
So I was wondering which part of my codes should be changed??Did not look at the code closely, but I am guessing the problem lies in the instantiation of the FileWriter. Try [this constructor|http://download.oracle.com/docs/cd/E17409_01/javase/6/docs/api/java/io/FileWriter.html#FileWriter(java.io.File,%20boolean)] (<- link). The documentation is a wonderful thing. ;-)
And generally on the subject of getting help:
- There is no need for two question marks. One '?' means a question, while 2 or more typically means a dweeb.
- Do your best to [write well|http://catb.org/esr/faqs/smart-questions.html#writewell] (<- link). Each sentence should start with an upper case letter. Not just the first one.
Also, when posting code, code snippets, XML/HTML or input/output, please use the code tags. The code tags protect the indentation and formatting of the sample. To use the code tags, select the sample and click the CODE button. -
Help with saving OSX as a bootable back-up
Hi,
I want to back up only my os as a bootable back-up. I have Super_Duper and a 250G HD. I just don't know which file(s) to tell SD to save for a back-up. Is is just the system folder? or are there other files that need to be saved as well. Apparently I can instruct the program to choose specific files.
Any help would be greatly appreciated.J Coletta:
It is difficult to make suggestions when you have not told us what you want to accomplish. Here are some suggestions that may or may not be appropriate to your needs:
1. Format external HDD and create one partition approximately the size of your internal HDD for backup/cloning. (See Dr. Smoke's FAQ Backup and Recovery for suggestions). You can create whatever other partitions you need. For step-by-step directions for formatting and partitioning please post back.
2. Use SuperDuper to clone the entire HDD to the backup partition (same size as HDD).
3. If you have a registered copy of SuperDuper you can do SmartUpdates, which take a small fraction of the time it takes to make a full clone.
4. Other partitions can be used for projects, archiving and stuff.
Your backup partition will be bootable, so you can use it as an emergency drive, or to run tests, diagnostics and repairs on the intenal HDD.
Please do post back with further questions or comments.
Good luck.
cornelius -
Help with saving custom stamps to SOAP repository.
In my attempt to create a custom SOAP based comment repository i've found that i can save and retrieve all lightweight annotations perfectly except for any custom stamps that I've created (default stamps work great). When i retreive the annotations from a different computer, it just displays a black box with a black x in the middle instead of actually displaying the stamp image. My guess here is that I need to read the custom stamp image to a stream and then save it to the server along with the annotation data. The problem is that I can't seem to get acrobat JS to detect and get the image (this.icon.length only counts default stamps). I do have an AP property for the stamp which is the named appearance according to the documentation. I just need some help now as to how i can retreive the stamp image data from the named appearance.
Any help would be greatly appreciated.
Thanks!Can anyone help me out with this? I have a requirement to enable saving custom stamps to a central server but i can't seem to be able to retrieve the image data for storage. Any leads would be greatly appreciated.
Thanks!
Maybe you are looking for
-
Hi, On one of the windows networking pc I have installed oracle client release 9.0.1.1.1. I am using a customized application for importing data but I get error in the import log saying IMP-00003: ORACLE error 942 encountered ORA-00942: table or view
-
Is zero backlog impossible in continous pulse period measurement?
I use two counters in PCI-6052E as two TTL input channels. Continous buffered Pulse periods are measured but a couple of data in the buffers are not read however I change measurement condition like time limit, count to read and buffer size. Is it imp
-
Is anyone else having an issue with Muse 2014.2 Freezing/Crashing at launch? It worked perfectly up until tonight and nothing has changed on my computer. I'm running windows 8.1. I've tried logging in and out of CC, I've uninstalled and reinstalled M
-
Don't like the layout of Photoshop CS4!
I've been a photoshop user for years (since V3) and I work with photoshop every day (except my day off) and I have several things that really aggravate me about the version CS4. Arrange Documents Which ever one of the brilliant little kids at Adobe t
-
Revision: 7825 Author: [email protected] Date: 2009-06-13 14:17:47 -0700 (Sat, 13 Jun 2009) Log Message: Updating sample Java formatter for Eclipse projects to stop reformatting method arguments. QA: No Doc: No Modified Paths: flex/sdk/trun